GMC-I Service GmbH Calibration Center

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "GMC-I Service GmbH Calibration Center"

Transcription

1 2016 GMC-I Service GmbH Calibration Center DAkkS, ISO & Factorycalibration From spare parts, reparation, rental service, maintenance of industrial health and safety standards, calibration and adjustment service we can offer you a complete Service package. We guarantee at the same time the security and reliability of your test equipment, assisting the customer colleagues and increase the economics at our customers. Competence GMC-I Service GmbH as leading after sales service provider is certified after DIN EN ISO 9001 and and our DakkS- Calibration Laboratory is certified after DIN EN ISO/IEC Processing of orders Serviceshop Spareparts Service Maintenance Aagreements Repair and Update Service Technical after sales support DGUV Vorschrift 3 (BGV-A3) Tests Express Service (24h,48h,Weekend) DAkkS- and Calibrationservice Test equipment management The guarantee time period for new devices begins from purchase date of the end user. You can send your devices naturally directly to our service center. (for repair and for our further services) The clearing and settlement of the services & repairs can be completed obviously directly between end users and our service center.

2 GMC-I Service GmbH - Competence and reliability Dear Customer, Thank you for your interest in our services for measuring and testing technology. Our service is for values such as quality, reliability and sustainability. "Competent, reliable and helpful, is your service of the GMC-I Service GmbH" This tell us our customers again and again, and we like to hear this. It's just what we aspire to and what distinguishes us from the competition. Competence and reliability GMC-I Service GmbH as leading after sales service provider is certified after DIN EN ISO 9001:2008 and 14001:2005 and our DAkkS- Calibration Laboratory is certified after DIN EN ISO/IEC Compared to the competition, GMS services can offer "one-hand" (Repair, standard update, calibration, spare parts, etc.) and customer-oriented solutions. The key differentiator is the focus on the specifics of the customers in terms of equipment to be tested, the type of products, made for the maintenance and repair is, scope, cost and duration. From repairs, spare parts service, service contracts, Rental Instrument, BGV A3 testing, calibration services, value-and quality-keeping operations we can offer an optimized package of services. We guarantee the security and integrity of all the resources, the promotion of client employees and thus increase the profitability of our customers Customer service from the date of buying a new product until to waste disposal Your tasks demand our competence. You can rely on. The direct line to our service : regards Gerhard Frisch Head of After Sales

3 GMC-I Service GmbH - Competence and reliability

4 Calibration questions and answers Why is calibration important? Test equipment monitoring is specified as an essential element of quality assurance for standard calibration in accordance with the DIN EN ISO series of standards. Test equipment monitoring must assure that all test equipment used for assuring product quality measures correctly. In order to ensure that this is the case, test equipment must be calibrated on a regular basis, and must be retraceable to national standards. Obtained measured values must be documented as well. Retracing of calibration results to national standards has been confirmed for the user in the past by means of a "factory certificate" provided as a standard feature. ILAC = International Laboratory Accreditation Cooperation EA = European Cooperation for Accreditaion DAkkS = Deutsche AkkreditierungsStelle = German Calibration Service However, international recognition of certificates of this type has become more and more uncertain due to rapidly growing numbers of, in some cases unqualified, calibration service providers. For this reason, ISO9000 inspectors are not only demanding calibration certificates from EA e.g. from ILAC accredited or associated calibration service (European Cooperation for Accreditation) in European countries outside of Germany. As a German member orgainzation, the DAkkS is accredited and thus enjoys unrestricted acceptance in all EU countries. Our DAkkS calibration laboratory is accredited by the German Calibration Service in accordance with DIN EN ISO / IEC under registration number D-K This assures that all requirements regarding service provider expertise are adhered to. Personnel assigned to DAkkS laboratories are subjected to examination for adequate capabilities and skills, and are continuously monitored. Beyond this, technical standards such as measuring uncertainty are known, and can be published as well. What is adjustment? Adjustment is a process by means of which an instrument is aligned or balanced such that measuring deviation from the setpoint value is as small as possible, and within the allowable tolerances specified for the instrument. The process of adjustment causes permanent change to the measuring instrument.

5 Calibration questions and answers What is calibration? Calibration is a process by means of which deviation of the display value from the actual value is determined and documented for a given measuring instrument, or deviation of the output quantity from the nominal value for a given test instrument. Measurement is thus performed which allows for a comparison of the device under test to a precise standard which can be traced back to national standards by means of a documented process. The objective of this process is to recognize and document deviations. If the value displayed by the measuring instrument, or the output quantity of the test instrument, is found to be outside of the allowable tolerance range during the course of calibration, two options are available: The instrument is adjusted in order to bring its values back into the allowable tolerance range, and is then recalibrated. Adjustment is deliberately omitted because the user wants to document measuring deviation for long-term use of his measuring or test instrument during defined periods of time. DAkks calibration certificate or factory calibration certificate? We are frequently asked in which cases the relatively inexpensive factory calibration certificate would be adequate in place of the more costly DAkkS certificate. Factory calibration certificates are issued based upon the use of standards which are subjected to test equipment monitoring on a regular basis. Traceability of the utilized standards is assured by means of test equipment monitoring at regular intervals. Factory calibration certificates are sufficient where calibration accuracy is important for the utilized measuring and test equipment, as long as it is not used as a standard. DAkkS calibration certificates are issued based upon the use of standards whose traceability is assured by means of DAkkS certificates or calibration certificates issued by the laboratories of the DAkkS (= German national accreditation body). DAkkS calibration certificates may only be issued by calibration laboratories which have been accredited by the DAkkS and only for specifically accredited measured quantities. This assures the maintenance of high standards of calibration quality by means of regular audits, traceable standards, precisely defined ambient conditions and specially trained personnel. These cost and personnel-intensive measures result in a higher price, but they also assure the reliability required for correct measuring results.

6 Calibration questions and answers Due to guaranteed traceability to national standards, DAkkS calibration should be used for the re-calibration of test equipment which itself is used as a standard for the monitoring of other measuring and test equipment. What is the recommended calibration interval? In order to continuously perform correct measurements, utilized measuring and test equipment must be monitored and calibrated on a regular basis. The corresponding time period is known as the calibration interval. Users of measuring and test equipment frequently ask how often calibration of this equipment is required. There is no single correct answer to this question, because calibration always represents an instantaneous snapshot of actual conditions which is dependent upon a variety of factors including the following: Measured quantity and allowable tolerance range Level of stress to which the equipment is subjected Stability of past calibrations Required measuring accuracy Quality assurance requirements In the final analysis, this means that the period of time between any two calibrations must be determined and monitored by the user himself. We recommend a calibration interval of 1 to 3 years. In order to assist our customers in making this often costly decision, we offer free consultation services provided by our own employees. As a rule, we specify a period of 1 year in our factory calibration certificates. Deviations from this rule should be noted by the customer in the purchase order, as well as in the delivery note. Calibration Laboratory for Energy Meters GMCi-Service is equipped with a federally recognized testing laboratory for electricity measuring instruments. The Bavarian authority for weights and measures recognizes our test laboratory in accordance with requirements set forth in calibration legislation. Our top-hat rail mounting meters are calibrated and recalibrated in our official measuring laboratory. Only calibrated meters may be used for billing purposes. According to test regulations introduced by the German Federal Institute for Physics and Metrology (PTB), appropriately established test points are calibrated to ensure adherence to specified error limits - for example start-up, no-load operation and accuracy.

7 Complete calibration services from a single source D-K Electrical quantities Temperature Pressure (*) Mass (*) Scales (*) Slip gauges (*) Production measuring equipment Atmospheric humidity (*) Electrical Quantities Calibration of measuring instruments and power sources Direct voltage (measured qty.), 1100 V Direct voltage (power sources), 10,000 V Direct current value, 11 A Direct current resistance (measured qty.), 100 Mohm Direct current resistance (power sources), 200 Mohm Direct current power (power sources), 1000V / 11A High value resistance, 30 GOhm / 1000 V Alternating voltage (measured qty.) 1100V /100kHz Alternating voltage (power sources) 1100 V / 300 khz, 10,000 V / 50 Hz Alternating current value 11 A / 10 khz Alternating current active power, 500 V / 20 A Frequency (measured qty.) 10 Hz to 1 MHz Frequency (power sources), 1 MHz Fixed value capacitance, 2.8 nf to 30 mf Temperature indicators / simulators for resistance thermometers, 850 C and thermocouples, 2000 C Fixed value for artifact calibration. (measuring instruments), 10V Oscilloscopes, data loggers, Y-t recorders (rise time, band width, horizontal sweep) ph measuring instruments (electrical) Special measuring equipment: e.g. Shunts by means of current-voltage method High value resistance, 30 GOhm with 5000 V measuring voltage Electrical conductivity Creation of reference solutions for electrical conductivity Measuring instruments and equipment Temperature Precision resistance thermometers per ITS-90 fixed points Direct display resistance thermometers Measuring equipment Precious and non-precious metal thermocouples Glass thermometers for liquids Temperature block calibrators Heating equipment (ovens, baths) Sensors for ascertaining atmospheric temperature Viscosity (*) ph value (*) Density (*) Torque (*) (*) via our partner ZMK GmbH Pressure Absolute pressure in gases Negative and positive overpressure in gases Positive overpressure in oil Mass Weights: Class E1 per OIML to 1 kg Class E2 to M3 per OIML to 50 kg Mass standards to 50 kg Determination of density and volume of weights to 1 kg Scales Non-automatic electronic scales to 3 tons (ultra-micro, micro, analysis, precision, commercial and industrial scales) Slip gauges Steel and ceramic to 100 mm Production measuring equipment Ring and mandrel gauges Vernier calipers Micrometer calipers and reference gauges Dial gauges, precision indicators, dead-weight micrometers Inside micrometers (2 point) Caliper gauges Atmospheric humidity Dew point temperature Relative humidity Viscosity Fabrication of Newtonian standard samples Efflux viscosity cup Various types of viscometers ph value Creation of ph value reference materials and buffer solutions Density Creation of density reference liquids Torque as calibration with certificate, from 0.5 to 1000 Nm (DAkkS calibration in progress)

8 +49 (0) Your representative:

Transferpette. Testing Instructions (SOP) 1. Introduction. May 2009

Transferpette. Testing Instructions (SOP) 1. Introduction. May 2009 Transferpette Testing Instructions (SOP) May 2009 1. Introduction The standards DIN EN ISO 8655 describe both the design and the testing of the piston operated pipette Transferpette. The following Testing

More information

Pressure is our Business

Pressure is our Business Pressure is our Business Count on gauges and calibrators that perform Wherever you work Reduce Measurement Error Protect against diminished accuracy from environmental conditions, accidental damage, and

More information

Maximum precision for quantifiable success.

Maximum precision for quantifiable success. Accredited calibration gas mixtures Maximum precision for quantifiable success. Reference materials and other accredited calibration gas mixtures. 02 Accredited calibration gas mixtures It s now official:

More information

KENYA ACCREDITATION SERVICE

KENYA ACCREDITATION SERVICE KENAS-GUD-016 01 16/03/2013 16 / 04/2013 GUD Page 1 of 18 Approval and Authorisation Completion of the following signature blocks signifies the review and approval of this Document. Name Job Title / Role

More information

Calibration equipment

Calibration equipment Calibration equipment Testo Industrial Services More assurance, better service www.testotis.com Why calibrate? Calibration and test equipment management are nowadays essential for the manufacturing quality

More information

CTAG:b9927e36a4b3f34a9138ce0bb2426b22 Certificate of Calibration

CTAG:b9927e36a4b3f34a9138ce0bb2426b22 Certificate of Calibration CTAG:b997e6abfa98cebb6b Certificate of Calibration Data Type: FOUND-LEFT Certificate No: 79 Instrument Description Manufacturer Model Serial Number Inventory Number CABLE ANALYZER FLUKE NETWORKS DTX-8

More information

Requirements and Methods for Calibration of Equipment in Clinical Laboratories. NK Chan (HKRCBTS) 24 August 2007

Requirements and Methods for Calibration of Equipment in Clinical Laboratories. NK Chan (HKRCBTS) 24 August 2007 Requirements and Methods for Calibration of Equipment in Clinical Laboratories NK Chan (HKRCBTS) 24 August 2007 1 Contents Basic Requirements of Equipment Calibration Calibration of Electronic Balance

More information

TRZ 03-K Volumeter. Proven Technology. Superior Performance. TRZ 03-K Volumeter is a Turbine Gas Flowmeter for Secondary Gas Metering.

TRZ 03-K Volumeter. Proven Technology. Superior Performance. TRZ 03-K Volumeter is a Turbine Gas Flowmeter for Secondary Gas Metering. TRZ 0-K Volumeter TRZ 0-K Volumeter is a Turbine Gas Flowmeter for Secondary Gas Metering. TRZ 0-K Turbine Gas Flowmeter continues the tradition of Honeywell s field-proven turbine meter technology, delivering

More information

Chapter Pipette service & maintenance. Pipette specifications according to ISO Repair in the lab or return for service?

Chapter Pipette service & maintenance. Pipette specifications according to ISO Repair in the lab or return for service? Pipette specifications according to ISO 8655 Chapter 5 5.1 The ISO 8655 standard gives the accuracy and precision limits as both absolute and relative values. Specifications will depend on the technique

More information

EN ISO/IEC Technical Requirements

EN ISO/IEC Technical Requirements EN ISO/IEC 17025 - Technical Requirements Wolfgang Garche Environmental Protection Agency Department Air Quality Monitoring, Information, Assessment 1 What means accreditation in accordance to EN ISO/IEC

More information

CTAG:e43bda4f8e48714fbb aefb192 Certificate of Calibration

CTAG:e43bda4f8e48714fbb aefb192 Certificate of Calibration CTAG:ebdaf8e87fbb5996aefb9 Certificate of Calibration Data Type: FOUND-LEFT Certificate No: 6858 Instrument Description Manufacturer Model Serial Number Inventory Number CABLE ANALYZER FLUKE NETWORKS DTX-8

More information

Certification of AMS acc. EN 15267, Part 3 - Overview and First Experience -

Certification of AMS acc. EN 15267, Part 3 - Overview and First Experience - Certification of AMS acc. EN 15267, Part 3 - Overview and First Experience - Dr. Wolfgang Jockel, Martin Schneider, TÜV Rheinland Group, D-51105 Cologne / Germany 1. Introduction A new basis for the certification

More information

Traceable calibration of automatic weighing instruments in dynamic operation

Traceable calibration of automatic weighing instruments in dynamic operation Traceable calibration of automatic weighing instruments in dynamic operation Matej Grum* Metrology Institute of the Republic of Slovenia, Grudnovo nabrežje 17, 1000 Ljubljana, Slovenia Abstract. The article

More information

JOS 15 JOS 25 JOS 40. Manual and semiautomatic test benches from DN 25 to DN 40. Characteristics. Basic characteristics. Test bench using balances

JOS 15 JOS 25 JOS 40. Manual and semiautomatic test benches from DN 25 to DN 40. Characteristics. Basic characteristics. Test bench using balances TEST BENCHES JOS 15 JOS 25 JOS 40 Manual and semiautomatic test benches from DN 25 to DN 40 02 Characteristics Compact test benches - all in one room Designation - for residential and apartment meters

More information

Precision level sensing with low-pressure module MS

Precision level sensing with low-pressure module MS The task on hand Level sensing as it is understood in modern process automation is much more than simply "tank half full" or "tank a quarter full". Using suitable sensors, levels, inlets and outlets can

More information

How to specify a product. Process Sensors and Mechanical Instruments

How to specify a product. Process Sensors and Mechanical Instruments How to specify a product Process Sensors and Mechanical Instruments Keep the overview. Here is some guideline information on how to specify our products. Intended as supplementary help to specification

More information

Calibration certificates

Calibration certificates Temperature Caibration certificate for temperature measuring chains consisting of a contact temperature sensor and an instrument (also individual sensors). The calibration of the sensors or sensor + measuring

More information

Hydraulic pressure balance Model CPB5800

Hydraulic pressure balance Model CPB5800 Calibration technology Hydraulic pressure balance Model CPB5800 WIKA data sheet CT 31.11 for further approvals see page 8 Applications Primary standard for calibrating the pressure scale in a hydraulic

More information

RADWAG Mass Comparators - ETERMA 2013 MASS COMPARATORS

RADWAG Mass Comparators - ETERMA 2013 MASS COMPARATORS RADWAG Mass Comparators - ETERMA 2013 MASS COMPARATORS 2013 1 Contents of pages: AKM-4...33 AKM-2...44 UYA.KO...55 MYA.KO...66 WAY.KO...77 APP.KO...88 XAY.KB...99 APP.KB...10 WPY/KB...11 Additional equipment

More information

P900. P900, Datenblatt Seite 1 DESCRIPTION

P900. P900, Datenblatt Seite 1 DESCRIPTION , Datenblatt Seite 1 Field proven rugged construction High overpressure capability High reliability for demanding environments Application specific customization Excellent media compatibility Shock and

More information

TESTING BENCHES for watermeters

TESTING BENCHES for watermeters TESTING BENCHES for watermeters +372 6 480 235 Haljas tee 25, 12012 TALLINN Fax +372 6 480 125 Testing benches are designed by Tepso Ltd. for using in calibration laboratories and also in watermeter production

More information

Road and rail tankers with level gauging Part 2 Metrological controls and tests. Page 1 of 42 OIML TC8/SC1/WG3/R 80-2 CD1 Draft of July

Road and rail tankers with level gauging Part 2 Metrological controls and tests. Page 1 of 42 OIML TC8/SC1/WG3/R 80-2 CD1 Draft of July Page 1 of 42 OIML TC8/SC1/WG3 Circulated to Members of OIML TC8/SC1/WG3 Title Revision R 80-2 Road and rail tankers with level gauging. Metrological controls and tests Discussion by e-mail and at the meeting

More information

Pneumatic dead-weight tester Model CPB3500

Pneumatic dead-weight tester Model CPB3500 Calibration technology Pneumatic dead-weight tester Model CPB3500 WIKA data sheet CT 31.22 Applications Primary standard for calibrating the scale in a pneumatic range from -1... 120 bar / -14.5... 1,600

More information

Metering Code Gas TSO, measurement by connected party Effective from to the present

Metering Code Gas TSO, measurement by connected party Effective from to the present Please note that although Gasunie Transport Services B.V. translated the Dutch network codes with utmost care, Gasunie Transport Services B.V. would like to point out that only the decisions of the Dutch

More information

Technical Data Sheet. OPTIMASS 7000 Custody Transfer Mass Flowmeter

Technical Data Sheet. OPTIMASS 7000 Custody Transfer Mass Flowmeter Technical Data Sheet KROHNE 12/2004 7.02516.21.00 CH/GR OPTIMASS 7000 Custody Transfer Mass Flowmeter with single straight measuring tube OIML R117 Pattern Approval Accuracy classes 0.3 / 0.5 / 1.0 / 1.5

More information

Requirements for the certification of movements and mechanical watches resistant to magnetic fields of 1.5 T ( G)

Requirements for the certification of movements and mechanical watches resistant to magnetic fields of 1.5 T ( G) Institut fédéral de métrologie METAS METAS-N001/EN Requirements for the certification of movements and mechanical watches resistant to magnetic fields of 1.5 T (15 000 G) This document is a translation

More information

Pneumatic service kit Model CPG-KITP

Pneumatic service kit Model CPG-KITP Calibration technology Pneumatic service kit Model CPG-KITP WIKA data sheet CT 93.01 Applications Oil and gas industry Maintenance and service facilities Calibration service companies and service industry

More information

Specialty gases in small cylinders. Combine flexibility and safety with lightweight portability. Specialty gases in small cylinders.

Specialty gases in small cylinders. Combine flexibility and safety with lightweight portability. Specialty gases in small cylinders. Specialty gases in small cylinders Combine flexibility and safety with lightweight portability. Specialty gases in small cylinders. 02 Specialty gases in small cylinders Our specialty gases guarantee precision.

More information

Application Note AN-107

Application Note AN-107 SPEC Sensor TM Characterization & Calibration Considerations Scope This document is provided to describe the considerations needed to characterize, calibrate, verify and validate the measurement performance

More information

Elcometer ISO Groove Depth Checker. Operating Instructions

Elcometer ISO Groove Depth Checker. Operating Instructions Elcometer 2060 English ISO Groove Depth Checker Operating Instructions English The Elcometer 2060 ISO Groove Depth Checker has been tested in accordance with EU regulations governing electro-magnetic compliance

More information

Elcometer Viscosity Cup. Operating Instructions

Elcometer Viscosity Cup. Operating Instructions Elcometer 2350 2351 2352 2353 2354 English Viscosity Cup Operating Instructions English is a registered trademark of Elcometer Limited. All other trademarks acknowledged. Copyright Elcometer Limited. 2009/2010.

More information

Gas flow calibrations performed at the National Metrology Institute of South Africa (NMISA)

Gas flow calibrations performed at the National Metrology Institute of South Africa (NMISA) Int. J. Metrol. Qual. Eng. 5, 303 (2014) c EDP Sciences 2014 DOI: 10.1051/ijmqe/2014012 Gas flow calibrations performed at the National Metrology Institute of South Africa (NMISA) D. Jonker and E.P. Tarnow

More information

HI 2314 HI 2315 HI 23151

HI 2314 HI 2315 HI 23151 Instruction Manual HI 2314 HI 2315 HI 23151 Multi-Range Conductivity Meters for Laboratories www.hannainst.com Dear Customer, Thank you for choosing a Hanna Instruments product. Please read this instruction

More information

Mass Flow Controller (MFC) for Gases

Mass Flow Controller (MFC) for Gases Mass Flow Controller (MFC) for Gases Bypass MFC with capillary technology for nominal flow rates from 5 ml N /min to 15 l N /min Applicable for aggressive gases Compact design and digital communication

More information

FILTER CARTRIDGES THE GENUINE PRODUCT FOR YOUR PROTECTION AND THEIR SAFETY.

FILTER CARTRIDGES THE GENUINE PRODUCT FOR YOUR PROTECTION AND THEIR SAFETY. FILTER CARTRIDGES THE GENUINE PRODUCT FOR YOUR PROTECTION AND THEIR SAFETY. BREATHING AIR INDUSTRY WHY YOU SHOULD OPT FOR BAUER FILTER CARTRIDGES. TESTED COMPONENTS protect lives, health and equipment.

More information

Stability and traceability of calibration gases for EN 14181

Stability and traceability of calibration gases for EN 14181 Stability and traceability of calibration gases for EN 14181 Stephen Mellor Especialista de Produto Product Specialist Analytical, Air Products Plc, United Kingdom DOSSIER EMISSÕES E MONITORIZAÇÃO ESTABILIDADE

More information

DM01. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05

DM01. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05 Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing Ø

More information

Inverse Proportional Pressure-Relief Cart., Size 2 4

Inverse Proportional Pressure-Relief Cart., Size 2 4 Inverse Proportional Pressure-Relief Cart., Size Q max = l/min, p max = 5 bar Direct acting, electrically operated 1 Description inverse proportional pressure-relief valves are direct acting screw-in cartridges

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CAPSTONE CALIBRATION 7016 Baker Blvd Richland Hills, TX 76118 Jon T. Cappa Phone: 817 284 2707 CALIBRATION Valid To: January 31, 2020

More information

ACCESSORIES DREMOMETER 281 DREMASTER K / UK / Z / SE 288 OTHER MECHANICAL TORQUE WRENCHES 304 ELECTRONIC TORSION TEST DEVICE E-TP 315

ACCESSORIES DREMOMETER 281 DREMASTER K / UK / Z / SE 288 OTHER MECHANICAL TORQUE WRENCHES 304 ELECTRONIC TORSION TEST DEVICE E-TP 315 258 259 TORQUE TOOLS DREMOMETER AM-F, A+S 268 ACCESSORIES DREMOMETER 281 DREMOMETER MINI / T-FS 282 DREMOMETER Z / SE, A+S 283 DREMASTER K / UK / Z / SE 288 TORCOFIX K / Z / SE / FS 294 TORQUE SCREWDRIVERS

More information

Organisation Internationale de Métrologie Légale

Organisation Internationale de Métrologie Légale Organisation Internationale de Métrologie Légale OIML INTERNATIONAL RECOMMENDATION Pressure balances Manomètres à piston OIML R 110 Edition 1994 (E) CONTENTS Foreword... 3 1 Scope... 4 2 Terminology...

More information

DTG - LCD Digital Temperature Gauge USER MANUAL

DTG - LCD Digital Temperature Gauge USER MANUAL DTG - LCD USER MANUAL Page 1 of 7 USERS GUIDE page 1. Description 3 2. Function 3 3. Safety Instruction 3 3.1. Safety Conventions 3 3.2. Proper Use 3 4. Installation 4 4.1. Unpacking 4 4.2. Storage 4 4.3.

More information

Series Ruska Digital Pressure Indicator. GE Sensing & Inspection Technologies. Features

Series Ruska Digital Pressure Indicator. GE Sensing & Inspection Technologies. Features GE Sensing & Inspection Technologies Series 7050 Ruska Digital Pressure Indicator Features Pressure ranges from 0 to 10 inh2o and 0 to 1500 psi (0 to 25 mbar and 0 to 100 bar) Choose from three models:

More information

UNIK 5600/5700 Marine Certified Pressure Sensing Platform

UNIK 5600/5700 Marine Certified Pressure Sensing Platform GE Measurement & Control UNIK 5600/5700 Marine Certified Pressure Sensing Platform The new UNIK 5600/5700 carries marine certification for most zones on-board ship, as well as Intrinsically Safe certifications.

More information

PM105 PRESSURE METER USER S MANUAL

PM105 PRESSURE METER USER S MANUAL PM105 PRESSURE METER USER S MANUAL Manual revision: 15 March, 2001 SCSMANP015 Copyrighted 2001 Thank you for purchasing a Tek Know pressure meter. The Tek Know products are manufactured by Scan-Sense AS

More information

E2K-L. Liquid Level Sensor That Is Unaffected by the Color of the Pipe or Liquid. Liquid Level Sensor. Ordering Information

E2K-L. Liquid Level Sensor That Is Unaffected by the Color of the Pipe or Liquid. Liquid Level Sensor. Ordering Information Liquid Level EK-L CSM_EK-L_DS_E 3 Liquid Level That Is Unaffected by the Color of the or Liquid Mount to bypass pipes. Fit a wide range of pipe diameters: 8 to mm or to mm Built-in Amplifiers to save space.

More information

PULSAR 5000 SERIES OPERATING & INSTALLATION INSTRUCTIONS SERIES 5000 PLEASE READ CAREFULLY BEFORE INSTALLING

PULSAR 5000 SERIES OPERATING & INSTALLATION INSTRUCTIONS SERIES 5000 PLEASE READ CAREFULLY BEFORE INSTALLING PULSAR 5000 SERIES OPERATING & INSTALLATION INSTRUCTIONS SERIES 5000 PLEASE READ CAREFULLY BEFORE INSTALLING Please Note: Ranges above 500mbar are designed and manufactured in accordance with sound engineering

More information

Organisation Internationale de Métrologie Légale. Direct mass flow measuring systems for quantities of liquids Annex C: Test report format

Organisation Internationale de Métrologie Légale. Direct mass flow measuring systems for quantities of liquids Annex C: Test report format Organisation Internationale de Métrologie Légale OIML INTERNATIONAL RECOMMENDATION Direct mass flow measuring systems for quantities of liquids Annex C: Test report format Ensembles de mesurage massiques

More information

Ambient Capacitance Gauge

Ambient Capacitance Gauge Ambient Capacitance Gauge KJLC ACG Operating Manual Incl. EU Declaration of Conformity tkna57e1 (2017-03) 1 Product Identification In all communications with Kurt J. Lesker Company, please specify the

More information

BUCKET ELEVATORS 1 BUCKET ELEVATORS. Technical Data for Bucket Elevators (BW)

BUCKET ELEVATORS 1 BUCKET ELEVATORS. Technical Data for Bucket Elevators (BW) BUCKET ELEVATORS 1 BUCKET ELEVATORS for Bucket Elevators (BW) www.amf-bruns.com BUCKET ELEVATORS 3 Contents Overview of Belt Bucket Elevators Overview of Chain Bucket Elevators BW 160 BW 200 BW 250 BW

More information

Prop. 3-Way Pressure-Reducing Cart., Size 5 / SAE 08

Prop. 3-Way Pressure-Reducing Cart., Size 5 / SAE 08 Prop. -Way Pressure-Reducing Cart., Size / SAE 8 Q max = 1 l/min (4 gpm), p max = bar (6 psi) Direct acting, electrically operated 1 Description proportional -way pressure-reducing cartridges are size

More information

THE USE OF Z FACTORS IN GRAVIMETRIC VOLUME MEASUREMENTS

THE USE OF Z FACTORS IN GRAVIMETRIC VOLUME MEASUREMENTS THE USE OF Z FACTORS IN GRAVIMETRIC VOLUME MEASUREMENTS Author: T. Mautjana NMISA Private Bag X 34 Lynwood Ridge; 0040 Email: tmautjana@nmisa.org Phone: 012 841 4798; Fax: 012 841 2131 Abstract Using gravimetric

More information

Heading 10 NEW. Calibration Technology Pressure. ARMATURENBAU GmbH MANOTHERM Beierfeld GmbH

Heading 10 NEW. Calibration Technology Pressure. ARMATURENBAU GmbH MANOTHERM Beierfeld GmbH Heading 10 Calibration Technology Pressure NEW 4/17 ARMATURENBAU GmbH MANOTHERM Beierfeld GmbH 10 000 ARMATURENBAU GmbH & MANOTHERM Beierfeld GmbH What is barotec Kalibriertechnik? The instruments of barotec

More information

RTD temperature probes

RTD temperature probes RTD temperature probes Ex i for use in areas with an explosion hazard (Ex areas) Persons concerned: Experienced professional electricians as per EU Directive 1999/92/EC and trained personnel Operating

More information

ETd 04. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. Type: ETd 04. class 0.05

ETd 04. Battery Powered Precision Digital Gauge. Stainless Steel Sensor.  Type: ETd 04. class 0.05 Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 100 mbar up to 0... 400 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing

More information

VISCOMETER, OFI, 8-SPEED, MODEL 800 PART No

VISCOMETER, OFI, 8-SPEED, MODEL 800 PART No OFI Testing Equipment Viscometer, 8 Speed, Model 800 Instructions Part # 130-10 Page 1 of 4 VISCOMETER, OFI, 8-SPEED, MODEL 800 PART No. 130-10 The model 800 eight speed electronic viscometer is designed

More information

DK46 - DK800 Supplementary instructions

DK46 - DK800 Supplementary instructions DK46 - DK800 Supplementary instructions Variable area flowmeter Device category II2G with electrical internals Additional Ex manual KROHNE CONTENTS DK46 - DK800 1 Safety instructions 3 1.1 General... 3

More information

Truck-mounted Mass Flow Metering for LPG Delivery

Truck-mounted Mass Flow Metering for LPG Delivery Truck-mounted Mass Flow Metering for LPG Delivery Itron, Inc. 1310 Emerald Rd. Greenwood, SC 29646 Introduction The mathematician Gustave De Coriolis first described the Coriolis Effect, which is an inertial

More information

Institute For Thermal Processing Specialists

Institute For Thermal Processing Specialists Institute For Thermal Processing Specialists TEMPERATURE DISTRIBUTION PROTOCOL FOR PROCESSING IN STILL, WATER IMMERSION RETORTS, INCLUDING AGITATING SYSTEMS OPERATED IN A STILL MODE Various methods and

More information

User-Calibration of Mettler AT200 Analytical Balance

User-Calibration of Mettler AT200 Analytical Balance UCRL-ID- 132292 User-Calibration of Mettler AT200 Analytical Balance J. Estill July 2,1996 This is an informal report intended primarily for internal or limited external distribution. The opinions and

More information

INTERNATIONAL OIML R 32 RECOMMENDATION. Rotary piston gas meters and turbine gas meters ORGANISATION INTERNATIONALE INTERNATIONAL ORGANIZATION

INTERNATIONAL OIML R 32 RECOMMENDATION. Rotary piston gas meters and turbine gas meters ORGANISATION INTERNATIONALE INTERNATIONAL ORGANIZATION INTERNATIONAL OIML R 32 RECOMMENDATION Edition 1989 (E) Rotary piston gas meters and turbine gas meters Compteurs de volume de gaz à pistons rotatifs et compteurs de volume de gaz à turbine OIML R 32 Edition

More information

Proportional valves with piezo technology in medical technology

Proportional valves with piezo technology in medical technology Proportional valves with piezo technology in medical technology You develop high-end medical technology. You expect solutions that meet your specific needs. We deliver customised and value-adding solutions.

More information

Any use of this material except in accordance with a written agreement with Western Power is prohibited.

Any use of this material except in accordance with a written agreement with Western Power is prohibited. September 2006 December 2005 Client Economic Regulation Authority Energy Safety Project Name Metering Code 2005 Document Number 3274025 Document Title Revision Status METERING MANAGEMENT PLAN Approved

More information

Rare Gas Applications

Rare Gas Applications Rare Gas Applications Specializing in EPA, Electronic, Medical, and NMR & MRI GLOBAL REACH, LOCAL SERVICE 1.800.649.6704 WWW. MIDDLESEXGASES.COM The Middlesex specialty gas advantage Middlesex Gases &

More information

FLOWSIC100 Flare Challenges in Ultrasonic Flare meter field installations. History of Evolution

FLOWSIC100 Flare Challenges in Ultrasonic Flare meter field installations. History of Evolution FLOWSIC100 Flare Challenges in Ultrasonic Flare meter field installations Mart Gloudemans, Sebastian Stoof, Sven Holzbächer SICK Germany History of Evolution 1 Introduction SICK FLOWSIC100 has track record

More information

DSL, DSH: Specially designed pressure limiter

DSL, DSH: Specially designed pressure limiter Product data sheet 11.1 23.770 DSL, DSH: Specially designed pressure limiter How energy efficiency is improved Control and monitoring according to needs and with no auxiliary energy. Features Switching

More information

Air Sensor. FCS Ex. Manual. AQ Elteknik AB

Air Sensor. FCS Ex. Manual. AQ Elteknik AB Air Sensor FCS Ex Manual AQ Elteknik AB Air Sensor Model FCS Ex Manual version 2.0 Oct 2010 AQ Elteknik AB AQ Elteknik AB Air Sensor Manual 2 Table of contents 1. Manufacturer information... 4 Manufacture

More information

7000 Series OPTIMASS Mass Flowmeters. Titanium Hastelloy Stainless Steel

7000 Series OPTIMASS Mass Flowmeters. Titanium Hastelloy Stainless Steel KROHNE 04/2003 7.02445.71.00 GR 7000 Series OPTIMASS Mass Flowmeters with single straight measuring tube Titanium Hastelloy Stainless Steel One tube no limits No limits with tube material No limits with

More information

TC65M/15M TEMPERATURE CALIBRATOR USER S MANUAL

TC65M/15M TEMPERATURE CALIBRATOR USER S MANUAL TC65M/15M TEMPERATURE CALIBRATOR USER S MANUAL Thank you for purchasing a Scan-Sense temperature calibrator. The products are manufactured by Scan-Sense AS in accordance with our high quality standards

More information

Notes on equipment protection to DIN EN and NEMA

Notes on equipment protection to DIN EN and NEMA Technical information Notes on equipment protection to DIN EN 60529 and NEMA WIKA data sheet IN 00.18 General information This technical information describes the measures to prevent both the formation

More information

Verification Of Calibration for Direct-Reading Portable Gas Monitors

Verification Of Calibration for Direct-Reading Portable Gas Monitors U. S. Department of Labor Occupational Safety and Health Administration Directorate of Science, Technology and Medicine Office of Science and Technology Assessment Verification Of Calibration for Direct-Reading

More information

AMT-Ex Dewpoint Transmitter

AMT-Ex Dewpoint Transmitter AMT-Ex Dewpoint Transmitter Instruction Manual Alpha Moisture Systems Alpha House 96 City Road Bradford BD8 8ES England Tel: +44 1274 733100 Fax: +44 1274 733200 email: mail@amsytems.co.uk web: www.amsystems.co.uk

More information

3.0 Pressure Transmitter Selection

3.0 Pressure Transmitter Selection 3.0 Pressure Transmitter Selection Each Tronic Line pressure transmitter has different features to meet specific performance, environmental, and price requirements. It is not possible to describe every

More information

Digital pressure gauge Model CPG500

Digital pressure gauge Model CPG500 Calibration technology Digital pressure gauge Model CPG500 WIKA data sheet CT 09.01 Applications Calibration service companies and service industry Measurement and control laboratories Quality assurance

More information

Liquid ring vacuum pumps in compact design

Liquid ring vacuum pumps in compact design Liquid ring vacuum pumps in compact design LEM 26, LEM 51 Pressure range: Suction volume flow: 33 to 113 mbar 3 to 58 m³/h CONSTRUCTION TYPE SIHI liquid ring vacuum pumps are displacement pumps of uncomplicated

More information

SPECIFICATION FOR REPEATED LOAD TRIAXIAL (RLT) TESTING FOR PAVEMENT MATERIALS

SPECIFICATION FOR REPEATED LOAD TRIAXIAL (RLT) TESTING FOR PAVEMENT MATERIALS SPECIFICATION FOR REPEATED LOAD TRIAXIAL (RLT) TESTING FOR PAVEMENT MATERIALS 1. SCOPE This specification details the six (6) stage permanent strain Repeated Load Triaxial (RLT) test for unbound and modified

More information

KLINGER CONAXE Double Offset High Performance Butterfly Valve DN

KLINGER CONAXE Double Offset High Performance Butterfly Valve DN KLINGER CONAXE Double Offset High Performance Butterfly Valve DN 50-1300 www.klinger.kfc.at MF 01 KLINGER FLUID CONTROL Today for tomorrow As a subsidiary of the KLINGER Group, KLINGER Fluid Control has

More information

BSS 2 Bottle Sampling System. Instruction manual Version 1.8

BSS 2 Bottle Sampling System. Instruction manual Version 1.8 BSS 2 Bottle Sampling System Instruction manual Version 1.8 Serial-No.:... Version-/Rev.-Date : 12.06.2012 Contents 1. General... 3 2. Safety Instructions... 4 3. Extent of Delivery... 5 4. Switch Panel...

More information

MANUAL KPS Pressure Control Valve

MANUAL KPS Pressure Control Valve TetraTec Instruments GmbH Gewerbestrasse 8 71144 Steinenbronn Deutschland E-Mail: info@tetratec.de Tel.: 07157/5387-0 Fax: 07157/5387-10 MANUAL Pressure Control Valve *** VERSION 1.0 *** Update: 17.11.2006

More information

Type Operating Instructions. 2/2-way solenoid valve 2/2-Wege Magnetventil Electrovanne 2/2 voies.

Type Operating Instructions. 2/2-way solenoid valve 2/2-Wege Magnetventil Electrovanne 2/2 voies. 2/2-way solenoid valve 2/2-Wege Magnetventil Electrovanne 2/2 voies We reserve the right to make technical changes without notice. Technische Änderungen vorbehalten. Sous réserve de modifications techniques.

More information

GasMultiBloc Combined regulator and safety valve Infinitely variable air/ gas ratio control mode MBC-300-VEF MBC-700-VEF MBC-1200-VEF

GasMultiBloc Combined regulator and safety valve Infinitely variable air/ gas ratio control mode MBC-300-VEF MBC-700-VEF MBC-1200-VEF GasMultiBloc Combined regulator and safety valve Infinitely variable air/ gas ratio control mode MBC-00-VEF 7.03 Max. operating pressure 30 mbar Compact design High flow values Low weight Low power consumption

More information

PRESSURE REGULATORS AND FLOWMETERS, ALL MEDICAL GASES

PRESSURE REGULATORS AND FLOWMETERS, ALL MEDICAL GASES PRESSURE REGULATORS ALL MEDICAL GASES In this section we propose our pressure regulators (FM series, MU and MERCURY ) and our Rs flowmeters for applications other than oxygen therapy (presented in the

More information

Vortex flowmeters. Product family introduction Principle of operation Product review Applications Key product features

Vortex flowmeters. Product family introduction Principle of operation Product review Applications Key product features Vortex flowmeters introduction Product review s Key product features This document should not be duplicated, used, distributed, or disclosed for any purpose unless authorized by Siemens. Page 1 Vortex

More information

Elcometer 2300 Rotational Viscometers. elcometer.com

Elcometer 2300 Rotational Viscometers. elcometer.com elcometer.com 1 Available in four versions with a choice of low to medium or medium to high viscosity ranges, either manually or PC controlled, the range of rotational viscometers can be used to measure

More information

MTS Restan. Automatic System for Residual Stress Measurement by Hole-Drilling

MTS Restan. Automatic System for Residual Stress Measurement by Hole-Drilling Automatic System for Residual Stress The MTS3000 - Restan system for measuring residual stresses Fully automatic drilling and acquisition process ensuring high repeatability High speed drilling (400,000

More information

Gebrüder Dreher Drehteile & Gasfedern GmbH

Gebrüder Dreher Drehteile & Gasfedern GmbH Gebrüder Dreher Drehteile & Gasfedern GmbH Product Line Gas Springs Introduction Calculation We are an owner-run family business with a success story that began some 70 years ago with the production of

More information

Notes on equipment protection per EN/IEC and NEMA For Bourdon tube or diaphragm pressure gauges

Notes on equipment protection per EN/IEC and NEMA For Bourdon tube or diaphragm pressure gauges Technical information Notes on equipment protection per EN/IEC 60529 and NEMA For Bourdon tube or pressure gauges WIKA data sheet IN 00.18 General information This technical information describes the measures

More information

We measure it. For gas and water installers. testo hpa. bar

We measure it. For gas and water installers. testo hpa. bar Pressure measuring instruments For gas and water installers testo 312-2 hpa testo 312-3 testo 312-4 bar C testo 312-2 / testo 312-3 Pressure meters for gas and water fitters testo 312-2 testo 312-2, fine

More information

Predicted Dispense Volume vs. Gravimetric Measurement for the MICROLAB 600. November 2010

Predicted Dispense Volume vs. Gravimetric Measurement for the MICROLAB 600. November 2010 Predicted Dispense Volume vs. Gravimetric Measurement for the MICROLAB 600 November 2010 Table of Contents ``Abstract...3 ``Introduction...4 ``Methods & Results...6 ``Data Analysis...9 ``Conclusion...12

More information

Online data sheet FLOWSIC500 GAS FLOW METERS

Online data sheet FLOWSIC500 GAS FLOW METERS Online data sheet FLOWSI500 FLOWSI500 A F H I J K L M N O P Q R S T US Ordering information Type FLOWSI500 Part no. On request The exact device specifications and performance data of the product may deviate

More information

HBLT-A1 LIQUID LEVEL SENSOR

HBLT-A1 LIQUID LEVEL SENSOR Instruction manual HBLT-A1 LIQUID LEVEL SENSOR for measuring liquid level in refrigerant vessels Instruction manual HBLT - A1 - Liquid level Transmitter (HBLT-A1-008-UK) 1 / 16 Contents Safety instructions...

More information

Technical Explanation

Technical Explanation Technical Explanation for ESI Pressure Sensors Technical Explanation What is a pressure transmitter? A pressure transmitter (also called pressure transducer or pressure converter) is a component used to

More information

Microwave Digestion System MWS-3 + Unique optical temperature and pressure monitoring of each individual sample during digestion.

Microwave Digestion System MWS-3 + Unique optical temperature and pressure monitoring of each individual sample during digestion. BERGHOF Microwave Digestion System Unique optical temperature and pressure monitoring of each individual sample during digestion. Features Simplified Handling Reduces Operating Costs Once the samples have

More information

Type Operating Instructions. Bedienungsanleitung Manuel d utilisation

Type Operating Instructions. Bedienungsanleitung Manuel d utilisation 2/2- and 3/2-way cartridge solenoid valve 2/2- und 3/2-Wege-Cartridge-Magnetventil Électrovanne cartridge à 2/2 ou 3/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation We reserve the

More information

KOMPRESSOREN THE LUNGS OF YOUR COMPRESSOR THE BAUER P-FILTER SYSTEM. No matter whether you count on the purest breathing

KOMPRESSOREN THE LUNGS OF YOUR COMPRESSOR THE BAUER P-FILTER SYSTEM. No matter whether you count on the purest breathing THE BAUER P-FILTER SYSTEM THE LUNGS OF YOUR COMPRESSOR Fotos: Ralf Deichelmann No matter whether you count on the purest breathing air as a diver or firefighter or if you have to trust in perfectly purified

More information

Drum-Type Gas Meters Series TG (Wet-Test)

Drum-Type Gas Meters Series TG (Wet-Test) Drum-Type Gas Meters Series TG (Wet-Test) Precision Volumetric Gas Meters for Scientific Laboratories User Benefits Highest accuracy: ±0.5% across full flow rate range Calibration traceable to German National

More information

Expert Hydrostatic Level Transmitters

Expert Hydrostatic Level Transmitters Expert Hydrostatic s General Features MJK Expert hydrostatic level transmitters are designed for level measurement by submerging the transmitter in open channels, drains and tanks. Expert hydrostatic level

More information

Gas Pressure Switch for DMV safety shutoff valves

Gas Pressure Switch for DMV safety shutoff valves Gas Switch for DMV safety shutoff valves GAO-A GMH-A GML-A UL Listed UL 353 File # MH 1668 CSA Certified CSA C. No. LR 53 File # 0157 FM Approved Class 3510, 3530 File # J.I. 1Y9A9.AF Commonwealth of Massachusetts

More information

VIC offers a variety of Calibrated Gas Leaks

VIC offers a variety of Calibrated Gas Leaks CALIBRATED GAS LEAKS VIC offers a high quality line of calibrated gas leaks traceable to National Institute of Standards Technology (NIST). Calibrated gas leaks are used to provide a controlled delivery

More information