This program is registered with the AIA/CES for continuing professional education. As such, it does not include content that may be deemed or

Size: px
Start display at page:

Download "This program is registered with the AIA/CES for continuing professional education. As such, it does not include content that may be deemed or"

Transcription

1

2 This program is registered with the AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product. Questions related to specific materials, methods, and services may be addressed at the conclusion of this presentation.

3 This presentation is protected by U.S. and International copyright laws. Reproduction, distribution, display and use of the presentation without written permission of the speaker is prohibited. American Architectural Manufacturers Association 2010

4 Comparison of the AAMA/WDMA/CSA 101/I.S.2/A lab test (referred to as NAFS-08) to the AAMA 502 quality assurance field test and the AAMA 511 forensic evaluation Determination of appropriate water test pressures, test durations and water applications via NAFS-08, AAMA , and How to specify project-specific quality assurance field testing The proper use of AAMA 511 for forensic evaluations

5 NAFS-08 Lab Testing Performed on prototype specimen to validate product performance ratings Introduction 502 Quality Assurance Field Testing Performed on newly installed products to verify installed performance of the product and the installation 511 Forensic Testing Performed on wall assemblies with known water control problems as a means to accurately identify suspect wall construction components and details

6 NAFS Overview

7 NAFS Overview Utilizes ASTM E 547 and/or E 331 for test methodology Test is performed under controlled environmental conditions Test sample is installed strictly per the manufacturer s instructions in a precise test buck opening

8 NAFS Overview Conversion as per NAFS-08 15% for R, LC, CW 20% for AW Water Resistance Test Pressure is capped at psf for the U.S. and psf for Canada Performance Class Gateway Requirements Minimum Design Pressure, Pa (psf) Minimum Structural test pressure, Pa (psf) R LC CW AW Minimum Water Resistance Test Pressure, Pa (psf)

9 NAFS Overview 6.00 PSF (~50 mph) Equivalent hydrostatic water head 1.16

10 NAFS Overview 7.50 PSF (~55 mph) Equivalent hydrostatic water head 1.44

11 AAMA AAMA 502

12 AAMA Original publication by AAMA AAMA Added reference to AAMA accredited laboratory and first introduced the 1/3 WTP reduction for water resistance testing of installed products AAMA 502 AAMA Defined newly installed as prior to issuance of the occupancy permit not to exceed 6 months after installation of the fenestration product.

13 ASTM E 783 Field Measurement of Air Leakage through Installed Exterior Windows and Doors AAMA 502 ASTM E 1105 Field Determination of Water Penetration of Installed Exterior Windows, Curtain Walls and Doors by Uniform or Cyclic Static Air Pressure Difference

14 Requires testing agency to report and make adjustments for ambient conditions. In some cases, temporary enclosures are required to reduce adverse effects of wind and temperature at the project site. AAMA 502

15 AAMA 502 ` The default air leakage for quality assurance field testing is 1.5 times the applicable laboratory standard for the product type and performance class

16 TO OUTSIDE BAROMETRIC PRESSURE ALTERNATE TEST CHAMBER PRESSURE MEASURING DEVICE TEST CHAMBER EXHAUST VALVE AAMA 502 PRESSURE GAUGE VALVE CALIBRATED WATER SPRAY RACK W THE CHAMBER SHALL NOT BE PERMITTED TO MAKE ANY CONTACT WITH THE FENESTRATION PRODUCT AIR SYSTEM INNERMOST PLANE FOR WATER PENETRATION (REFERENCE PARAGRAPH 4.3.4)

17 ` AAMA 502 ` Requires testing agency to report and make adjustments for ambient conditions Test is performed on the entire fenestration product opening

18 The test pressure shall not be less than 91 Pa (1.9 psf) AAMA 502 Tests shall be conducted at a static test pressure equal to 2/3 of the tested and rated laboratory performance per AAMA/WDMA/CSA 101/I.S. 2/A440

19 AAMA Newly installed fenestration product(s) shall be field tested in accordance with AAMA 502, "Voluntary Specification for Field Testing of Newly Installed Fenestration Products." 2. Test three (unless otherwise specified) of the fenestration product specimens after the products have been completely installed for air leakage resistance and water penetration resistance as specified. 3. Air leakage resistance tests shall be conducted at a uniform static test pressure of Pa ( psf). The maximum allowable rate of air leakage shall not exceed L/s m2 ( cfm/ft2) 4. Water penetration resistance tests shall be conducted at a static test pressure of Pa ( psf). No water penetration shall occur as defined in Section of AAMA 502

20 1/3 reduction to the laboratory rating of the WTP is the default Sill Dam test is removed from 502 and moved to the 511 document AAMA 502

21 Method A Product only testing has been eliminated from the and moved to AAMA 511. AAMA 502 If the source of the water cannot be determined, a forensic evaluation using the procedures outlined in AAMA 511 shall be performed

22 AAMA AAMA 503

23 AAMA 503 AAMA 503 was originally published in 1992 AAMA 503 is a similar document to AAMA 502 for Storefronts, Curtain Walls & Sloped Glazing Systems. Updated in 2003 & 2008 AAMA Defined newly installed as prior to issuance of the occupancy permit not to exceed 6 months after issuance of the occupancy permit.

24 AAMA 503

25 Storefronts Curtain Wall Sloped Glazing AAMA 503

26 AAMA 503 Curtain Wall Chamber Arrangement

27 Storefronts Curtain Wall Sloped Glazing AAMA 503

28 AAMA 503 Sloped Glazing Systems Chamber Arrangement

29 Storefronts Curtain Wall Sloped Glazing AAMA 503

30 Forensic Investigation

31 ASTM References in AAMA 511 Forensic Investigation ASTM E 2128, Standard Guide for Evaluating Water Leakage of Building Walls This guide describes methods for determining and evaluating water leakage of exterior walls. A wall is considered a system including its exterior and interior finishes, fenestration, and structural components.

32 Forensic Investigation Involves more than just testing The purpose of diagnostic testing is to recreate water leaks that are known to occur AAMA 511 testing either follows up on AAMA 502 and 503 testing or is used in a water intrusion investigation

33 Forensic Investigation The ultimate goal of 511 diagnostic testing is to recreate existing leakage behavior that occurs under in-service conditions.

34 Forensic Investigation Four Preliminary Steps prior to testing Review of project documents Evaluation of design concept Determination of service history Inspection Three Steps During and After Testing Investigative Testing Analysis Report

35 Forensic Investigation Step #1: Review Project Documents Architectural drawings Structural drawings Shop drawings Installation instructions Contracts Purchase orders Specifications Warranties

36 Forensic Investigation Step # 2: Evaluation of Design Concept Water management concept Critical details Test reports Flashing Sealants Weep Holes

37 Forensic Investigation Step # 3: Determination of Service History Review maintenance records Interview knowledgeable personnel Research leak history

38 Forensic Investigation Step #4: Inspection Interior observations Exterior observations Observe workmanship Observe product deficiency Develop a hypothesis for the source of the water intrusion

39 Forensic Investigation

40 Forensic Investigation Determination is based on: Field Standards Laboratory Standards Prior Testing Weather Data Experience

41 Forensic Investigation Simulate the weather events Obtain wind speed If calculated wind speed is greater then 2/3 of the rated WTP for the product it may be that the product was not the most appropriate for the project. At least one pressure difference test must be done at the 2/3 pressure

42 Forensic Investigation ASCE 7 accounts for: Exposure Height above grade Basic wind speed (or weather data) Location of specimen within façade

43 Forensic Investigation

44 Forensic Investigation The objective of testing is to identify the leak paths

45 AAMA 511- Example 1 Consistent leaks more than one year Heaviest leakage twice during September 2005 Class II Building height is 33 ft., window (z) is 27 ft. above ground Window is 4 high x 4 wide, wind area (A) of 16 ft 2 AAMA rating C35

46 AAMA 511 Example #1

47 Estimating the Test Pressure AAMA 511- Example 1 ASCE/SEI 7 05 analysis is used with the following information: Location of building (Newark, NJ) Building usage designation (Class II) Exposure level (Exposure B) Building design (enclosed structure with a flat roof ) Building height (33 ft.) Window area (16 square ft.) From these features, the water resistance test pressure is, theoretically, 2.4 psf.

48 AAMA 511- Example 1 Local weather data is analyzed by daily readings for September of 2005, allowing the investigator to observe the weather condition, amount of precipitation and maximum wind speed for each day

49 AAMA 511 Example #1

50 AAMA 511- Example 1 The maximum 5 second gust wind speeds are recorded for every day in September in which measurable rainfall occurred Date Rain Fall (in) Max Wind Speed (mph) 5-Sec. Gust 4-Sep Sep Sep

51 AAMA 511- Example 1 Only two leak events are reported during September 2005 Average wind determined to be 34 mph Date Rain Fall (in) Max Wind Speed (mph) 5-Sec. Gust 4-Sep Sep Sep

52 AAMA 511- Example 1 Result = 2.1 psf which is the differential pressure used to evaluate the window opening in question Weather data analysis is used to determine field water penetration resistance pressure Table 3 of AAMA/WDMA/CSA 101/I.S. 2/A shows tested water penetration resistance pressure The result of the weather data analysis (2.2 psf ) is the differential pressure used to evaluate the window opening in question

53 AAMA 511- Example 2 Leak Reported during storm on September 21, 2005 Class II, Exposure C Building height is 60 ft., window (z) is 55 ft. above ground Window is 2 high x 2 wide, wind area (A) of 4 ft2 AAMA rating C35

54 Estimating the Test Pressure AAMA 511- Example 2 ASCE/SEI 7 05 analysis is used with the following information: Location of building (Chicago, Il) Building usage designation (Class II) Exposure level (Exposure C) Building design (enclosed structure with a flat roof ) Building height (60 ft.) Window area (4 square ft.) From these features, the water resistance test pressure is, theoretically, 3.2 psf.

55 AAMA 511- Example 2 Referring to tabulated local weather data above, the investigator can determine and record the maximum 5 second gust speeds on the date of the reported leak Date Rain Fall (in) Max Wind Speed (mph) 5-Sec. Gust 21-Sep

56 AAMA 511- Example 2 52 mph can now be used in Eq from SEI/ASCE 7 05 to establish a wind pressure of 7.9 psf Since specimen height is above 60 feet above grade, this wind pressure is inserted into Eq to calculate maximum test pressure Result = 8.4 psf, which is greater than the laboratory water penetration resistance test pressure of 5.25 psf as prescribed for a C 35 product rating. Since calculated differential air test pressure exceeds the rated performance value for the product, investigator shall first perform at least 1 test at 2/3 of the product performance rating prior to testing at calculated pressure.

57 Interior Weep Holes Water shall cover all horizontal surfaces expected to be wet Tape applied over Exterior Weep Test Water Head measured from bottom of exterior wrap AAMA 511 Example #2

58 Recreating the Leak Need to determine: How to apply water How long to run test Whether or not to include differential pressure How much air pressure How to step or phase pressure

59 Recreating the Leak

60 Recreating the Leak

61 Recreating the Leak How long would you test these substrates?

62 Recreating the Leak Which application best fulfills the objective?

63 Recreating the Leak

64 Recreating the Leak

65 Recreating the Leak How does differential pressure affect the test specimen?

66 Recreating the Leak Start with zero differential pressure then step up to higher pressures

67 Recreating the Leak

68 Recreating the Leak

69 Recreating the Leak Start testing at lower elevations and work higher Introduce one new element at a time into each new water test Use isolation to protect features from water spray Do not turn the water off at the first moment a leak appears Try to trace the leak from the exterior to the interior and use destructive wall probes as required to identify this leak path Do not end non-leaking tests until you are confident the specimen is not contributing to leakage

70 Recreating the Leak No or limited leak history Leak reported as window leak when leak is actually from another source Not enough water pressure Not able to achieve differential pressure Owner does not want to remove interior finishes No or limited access to concealed wall areas Inclement weather Isolation failures

71 Identifying the Source

72 Identifying the Source

73 Identifying the Source

74 Identifying the Source

75 Identifying the Source

76 Analysis and Reporting The forensic investigator has the responsibility to make every attempt to ascertain the exact path of water intrusion Conclusions are formed in this step on the basis of the inspection and testing data collected in the previous steps. If conclusions cannot be fully supported by sound scientific principles then additional investigation is needed

77 Analysis and Reporting All reports shall be self-contained documents Shall include justification for deviations from the methodology described in the standard The reports shall not include any unsubstantiated opinions or conclusions. If results are not conclusive the forensic investigator shall present options for obtaining conclusive results

78 Please take a moment to complete the evaluation form. Thank You.

AAMA/WDMA/CSA 101/I.S.2/A AAMA/WDMA/CSA 101/I.S.2/A STRUCTURAL PERFORMANCE TEST REPORT SUMMARY RENDERED TO:

AAMA/WDMA/CSA 101/I.S.2/A AAMA/WDMA/CSA 101/I.S.2/A STRUCTURAL PERFORMANCE TEST REPORT SUMMARY RENDERED TO: AAMA/WDMA/CSA 101/I.S.2/A440-05 AAMA/WDMA/CSA 101/I.S.2/A440-08 STRUCTURAL PERFORMANCE TEST REPORT SUMMARY RENDERED TO: ALL SEASONS DOOR & WINDOW, INC. 28 EDGE ROAD EAST BRUNSWICK, NJ 08816 MODEL/ A-200

More information

PERFORMANCE TEST REPORT FOR AIR LEAKAGE AND DURABILITY OF BARRIER PRODUCTS ASTM E Rendered to: BAUTEX SYSTEMS

PERFORMANCE TEST REPORT FOR AIR LEAKAGE AND DURABILITY OF BARRIER PRODUCTS ASTM E Rendered to: BAUTEX SYSTEMS Architectural Testing PERFORMANCE TEST REPORT FOR AIR LEAKAGE AND DURABILITY OF BARRIER PRODUCTS ASTM E 2357 Rendered to: BAUTEX SYSTEMS SERIES/MODEL: AMB 20-WN PRODUCT TYPE: Air Barrier System Report

More information

ASTM E1886 and ASTM E1996 TEST REPORT. Report No.: E Rendered to: 3M COMPANY St. Paul, Minnesota 55144

ASTM E1886 and ASTM E1996 TEST REPORT. Report No.: E Rendered to: 3M COMPANY St. Paul, Minnesota 55144 ASTM E1886 and ASTM E1996 TEST REPORT Report No.: E6587.01 201 44 Rendered to: 3M COMPANY St. Paul, Minnesota 55144 PRODUCT TYPE: Safety and Security Window Film SERIES/MODEL: 3M Safety and Security Film

More information

Water Management Residential Podium Construction BSC Experts Session Overview. Overview

Water Management Residential Podium Construction BSC Experts Session Overview. Overview Building Science Experts' Seminar Water Management Residential Podium December 11-12, 2013 Peter Baker, P.Eng. Water Management Residential Podium BSC Experts Session 2013 Overview Building Enclosure Commissioning

More information

CYCLIC PERFORMANCE PER ASTM E 330 TEST REPORT. Rendered to: TRUSEAL TECHNOLOGIES, LTD. PRODUCT TYPE: Fixed Window

CYCLIC PERFORMANCE PER ASTM E 330 TEST REPORT. Rendered to: TRUSEAL TECHNOLOGIES, LTD. PRODUCT TYPE: Fixed Window CYCLIC PERFORMANCE PER ASTM E 330 TEST REPORT Rendered to: TRUSEAL TECHNOLOGIES, LTD. PRODUCT TYPE: Fixed Window Report No.: Test Dates: 07/30/07 Through: 08/03/07 Report Date: 08/20/07 Expiration Date:

More information

4 Testing Agency Guide. 4.1 U.S. Army Corps of Engineers (USACE) Standard for Air Leakage

4 Testing Agency Guide. 4.1 U.S. Army Corps of Engineers (USACE) Standard for Air Leakage 10 4 Testing Agency Guide 4.1 U.S. Army Corps of Engineers (USACE) Standard for Air Leakage The USACE requires all new buildings and major renovation projects to pass an air leakage test where the results

More information

American Society of Sanitary Engineering PRODUCT (SEAL) LISTING PROGRAM

American Society of Sanitary Engineering PRODUCT (SEAL) LISTING PROGRAM American Society of Sanitary Engineering PRODUCT (SEAL) LISTING PROGRAM ASSE STANDARD #1003 - REVISED: 2009 Water Pressure Reducing Valves for Domestic Water Distribution Systems MANUFACTURER: CONTACT

More information

Air Pressure Test to EN13829:2000

Air Pressure Test to EN13829:2000 Air Pressure Test to EN13829:2000 16 Kilgarron Park Enniskerry Co. Wicklow 2014-03-04 Pre-Renovation Test Directors: G Ó Sé, J Uí Shé 1 Table of Contents Introduction... 3 Pressure Test Result Summary...

More information

1688 Jean-Berchmans-Michaud Drummondville, Quebec. J2C 8E9. Mr. Marc-Etienne Mathieu,ing.

1688 Jean-Berchmans-Michaud Drummondville, Quebec. J2C 8E9. Mr. Marc-Etienne Mathieu,ing. EVALUATION OF FRAMED WALL CONSTRUCTION SECTIONS UTILIZING SOPREMA S SOPRASEAL STICK 1100T SELF-ADHERED AIR BARRIER SYSTEM IN ACCORDANCE WITH CAN/ULC S742-11 Report to: Soprema 1688 Jean-Berchmans-Michaud

More information

VACUUM TESTING PRECAST CONCRETE MANHOLES

VACUUM TESTING PRECAST CONCRETE MANHOLES 1 OF 5 testing is a quick, safe and practical way to validate manhole system integrity. Manhole sections can be tested at the precast concrete plant prior to delivery or on site prior to backfilling. Here

More information

LATICRETE International Inc. One LATICRETE Park North Bethany, CT USA

LATICRETE International Inc. One LATICRETE Park North Bethany, CT USA EVALUATION OF FRAMED WALL CONSTRUCTION SECTIONS UTILIZING LATICRETE INTERNATIONAL S LATICRETE BUILDING ENVELOPE SYSTEM AIR BARRIER SYSTEM IN ACCORDANCE WITH CAN/ULC S742-11 Report to: LATICRETE International

More information

ETEM S.A. LIGHT METALS COMPANY 1, IROON POLYTEHNIOU STR. GR MAGOULA ATTIKIS GREECE

ETEM S.A. LIGHT METALS COMPANY 1, IROON POLYTEHNIOU STR. GR MAGOULA ATTIKIS GREECE TEST REPORT Report Number 0602 Report Date 21 / 02 / 2006 Client Specimen description ETEM S.A. LIGHT METALS COMPANY 1, IROON POLYTEHNIOU STR. GR 190 18 MAGOULA ATTIKIS Curtain Wall Specimen With three

More information

CONTENTS 1. INTRODUCTION DESCRIPTION OF TEST SAMPLE TEST RIG GENERAL ARRANGEMENT TEST SEQUENCE...7

CONTENTS 1. INTRODUCTION DESCRIPTION OF TEST SAMPLE TEST RIG GENERAL ARRANGEMENT TEST SEQUENCE...7 Page 2 of 22 CONTENTS 1. INTRODUCTION...3 2. DESCRIPTION OF TEST SAMPLE...4 3. TEST RIG GENERAL ARRANGEMENT...6 4. TEST SEQUENCE...7 5. SUMMARY AND CLASSIFICATION OF TEST RESULTS...8 6. WATERTIGHTNESS

More information

OCTOBER 2017 ISSUE Page 1 of 7

OCTOBER 2017 ISSUE Page 1 of 7 Field testing is performed on fully assembled pipelines for the purpose of determining pipeline acceptability. Following visual acceptance of joints and pipeline components, pressure pipelines in their

More information

NFRC U-FACTOR, SHGC, VT, & CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT. (Revised) Rendered to: NORTH EAST WINDOWS, USA, INC.

NFRC U-FACTOR, SHGC, VT, & CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT. (Revised) Rendered to: NORTH EAST WINDOWS, USA, INC. NFRC U-FACTOR, SHGC, VT, & CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT (Revised) Rendered to: NORTH EAST WINDOWS, USA, INC. SERIES/MODEL: DH990 Double Hung Report Number: Original Report Date: Revised

More information

TESTING APPLICATION STANDARD (TAS)

TESTING APPLICATION STANDARD (TAS) TESTING APPLICATION STANDARD (TAS) No. 00(A)-9 TEST PROCEDURE FOR WIND AND WIND DRIVEN RAIN RESISTANCE AND/OR INCREASED WINDSPEED RESISTANCE OF SOFFIT VENTILATION STRIP AND CONTINUOUS OR INTERMITTENT VENTILATION

More information

IN-PLACE DENSITY OF BITUMINOUS MIXES USING THE NUCLEAR MOISTURE-DENSITY GAUGE FOP FOR WAQTC TM 8

IN-PLACE DENSITY OF BITUMINOUS MIXES USING THE NUCLEAR MOISTURE-DENSITY GAUGE FOP FOR WAQTC TM 8 OF BITUMINOUS MIXES USING THE NUCLEAR MOISTURE-DENSITY GAUGE FOP FOR WAQTC TM 8 Scope This test method describes a test procedure for determining the density of bituminous mixes by means of a nuclear gauge

More information

Piped Air SCBA Refilling System Standard

Piped Air SCBA Refilling System Standard WALT WHITE Fire Chief 5770 Freeport Blvd., Suite 200 Sacramento, CA 95822-3516 Ph: (916) 808-1300 Fax: (916) 808-1629 www.sacfire.org Piped Air SCBA Refilling System Standard SCOPE: This specification

More information

1 Scope... 2 Functions of cementing float equipment... 3 Definitions... 4 Calibration... 5 Test Categories... 6 General...

1 Scope... 2 Functions of cementing float equipment... 3 Definitions... 4 Calibration... 5 Test Categories... 6 General... American Petroleum Institute Contents Page 1 Scope... 2 Functions of cementing float equipment... 3 Definitions... 4 Calibration... 5 Test Categories... 6 General... 7 Apparatus and Materials... 8 High-temperature/high-pressure

More information

SDS -Series 4C-D201/-D202 Supplemental Drying System User s Manual

SDS -Series 4C-D201/-D202 Supplemental Drying System User s Manual SDS -Series 4C-D201/-D202 Supplemental Drying System User s Manual 8 Executive Drive P.O. Box 2105 Toms River, NJ 08754 (732) 244-0010 (800) 337-3762 fax (732) 244-8140 www.permapure.com info@permapure.com

More information

Supplementary Operator s Manual 42/24-14 EN Rev. 3

Supplementary Operator s Manual 42/24-14 EN Rev. 3 Advance Optima Continuous Gas Analyzers AO2000 Series with Uras26, Magnos206, Caldos25, Caldos27 Designed per Category 3G for Measurement of Flammable Gases ( Safety Concept ) and Non-flammable Gases Supplementary

More information

Airtightness Testing in Large Buildings: NESEA 2016

Airtightness Testing in Large Buildings: NESEA 2016 Airtightness Testing in Large Buildings: NESEA 2016 Dr John Straube, P.Eng. Associate Professor, University of Waterloo Principal, RDH Building Science This session: why would one invest in airtightness

More information

Overview ASTATT3. Carry out air tightness testing for single dwellings and other small buildings

Overview ASTATT3. Carry out air tightness testing for single dwellings and other small buildings Overview This standard is for those who carry out air tightness and/or change rate testing of single dwellings and small up to a gross internal volume of 4000m³ inside the thermal line as defined by EN13829

More information

Gas Measurement Fundamentals Certification. Curriculum

Gas Measurement Fundamentals Certification. Curriculum Gas Certification Institute, LLC P.O. Box 131525 Houston, Texas 77219-1525 281-598-7200 Phone 281-598-7199 Fax contact@gascertification.com www.gascertification.com Curriculum Copyright 2007-2012 Gas Certification

More information

HAST CHAMBERS by HIRAYAMA

HAST CHAMBERS by HIRAYAMA Part I HAST CHAMBERS by HIRAYAMA When you are looking for a HAST Chamber keep two key aspects in mind: One: A HAST CHAMBER is a Precision Scientific Instrument It is NOT a run-of-the-mill Temperature and

More information

Laboratory Report H

Laboratory Report H Air Permeance Testing of in accordance with ASTM E2178 Prepared for: 6797 Thoreau Lane Baltimore, OH 43105 Date of Issuance: January 16, 2013 Page 2 of 5 CLIENT INFORMATION: TRINITY ERD PROJECT: 6797 Thoreau

More information

Installation Operation Maintenance. Bermad Level Control Valve with Modulating Horizontal Float Pilot valve One Way Flow IOM.

Installation Operation Maintenance. Bermad Level Control Valve with Modulating Horizontal Float Pilot valve One Way Flow IOM. Bermad Level Control Valve with Modulating Horizontal Float Pilot valve One Way Flow Model: FP 450-80 Installation Operation Maintenance PAGE 1 OF 5 1. Safety First BERMAD believes that the safety of personnel

More information

American Society of Sanitary Engineering PRODUCT (SEAL) LISTING PROGRAM

American Society of Sanitary Engineering PRODUCT (SEAL) LISTING PROGRAM American Society of Sanitary Engineering PRODUCT (SEAL) LISTING PROGRAM ASSE STANDARD #1048 - REVISED: 2009 Double Check Detector Fire Protection Backflow Prevention Assemblies Separate, complete laboratory

More information

ANDERSON GREENWOOD SERIES 9000 POSRV INSTALLATION AND MAINTENANCE INSTRUCTIONS

ANDERSON GREENWOOD SERIES 9000 POSRV INSTALLATION AND MAINTENANCE INSTRUCTIONS Procedure-assembly-functional test and performance requirements 1 SCOPE 1.1 This document establishes the general procedure for assembly, functional testing and normal performance requirements of low Series

More information

SECTION 25 TESTING AND DISINFECTING WATER MAINS General

SECTION 25 TESTING AND DISINFECTING WATER MAINS General SECTION 25 TESTING AND DISINFECTING WATER MAINS 25-1.01 Scope 25-1 General This section describes the requirements for pressure and leak testing, and disinfecting of water mains and appurtenances, including

More information

Laboratory and Satellite Rodent Housing

Laboratory and Satellite Rodent Housing University of Louisville Institutional Animal Care and Use Committee Policies and Procedures Laboratory and Satellite Rodent Housing Policy: Although strongly discouraged, the IACUC acknowledges that there

More information

ETEM S.A. LIGHT METALS COMPANY 1, IROON POLYTEHNIOU STR. GR MAGOULA ATTIKIS GREECE

ETEM S.A. LIGHT METALS COMPANY 1, IROON POLYTEHNIOU STR. GR MAGOULA ATTIKIS GREECE TEST REPORT Report Number 0601 Report Date 10 / 02 / 2006 Client Specimen description ETEM S.A. LIGHT METALS COMPANY 1, IROON POLYTEHNIOU STR. GR 190 18 MAGOULA ATTIKIS Curtain Wall Specimen With four

More information

TEST REPORT. Report No.: G Rendered to: VELUX America LLC Greenwood, South Carolina

TEST REPORT. Report No.: G Rendered to: VELUX America LLC Greenwood, South Carolina TEST REPORT Report No.: G4124.02-109-44 Rendered to: VELUX America LLC Greenwood, South Carolina PRODUCT TYPE: Sun Tunnel Skylight SERIES/MODEL: TCC 022 SPECIFICATION(S): Occupational Safety and Health

More information

CALIBRATION SYSTEM REQUIREMENTS. ESCC Basic Specification No

CALIBRATION SYSTEM REQUIREMENTS. ESCC Basic Specification No Page 1 of 8 CALIBRATION SYSTEM REQUIREMENTS ESCC Basic Specification Issue 4 February 2014 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER AND COPYRIGHT European

More information

STANDARD OPERATING PROCEDURES

STANDARD OPERATING PROCEDURES PAGE: 1 of 9 CONTENTS 1.0 SCOPE AND APPLICATION 2.0 METHOD SUMMARY 3.0 SAMPLE PRESERVATION, CONTAINERS, HANDLING AND STORAGE 3.1 Canister Receipt 3.2 Canister Storage 4.0 INTERFERENCE AND POTENTIAL PROBLEMS

More information

provides an increased stiffness and strength compared with standard cee studs, resulting in lighter headers which require less labor to install.

provides an increased stiffness and strength compared with standard cee studs, resulting in lighter headers which require less labor to install. CURTAIN WALL SYSTEMS HEADER/SILL SOLUTIONS JAMSTUD HEADER/SILL ASSEMBLY VALUE delivers exceptional value when utilized as part of a header or sill assembly. s unique shape allows for the design and construction

More information

FAQs: Confined Spaces in Residential Construction

FAQs: Confined Spaces in Residential Construction Provided by Marshall & Sterling, Inc. FAQs: Confined Spaces in Residential Construction A new standard for construction work in confined spaces became effective Aug. 3, 3015. The new standard (Subpart

More information

Guidance on room integrity testing and its interpretation

Guidance on room integrity testing and its interpretation Guidance Note Guidance on room integrity testing and its interpretation Guidance on room integrity testing and its interpretation 1. SCOPE... 6 2. INTRODUCTION AND BACKGROUND... 6 2.1. DEVELOPMENT OF INTEGRITY

More information

T hroughout 2003, the American National

T hroughout 2003, the American National T hroughout 2003, the American National Standards Institute issued revisions of three standards whose requirements affect the equipment and techniques used by millions of American workers and safety professionals.

More information

Air Leakage Detailing & Awareness Services

Air Leakage Detailing & Awareness Services Tel: 08456 808048 Mob: 07866 948200 www.aldas.co.uk Info@aldas.co.uk Report on the Repeat Air Permeability Testing of the Passivhaus Refurbishment of: 57 Portfield Street, Hereford 16 th July 2010 Address:

More information

Product Guide. Latitude Series High-Performance Exterior Metal Wall Panels for Horizontal and Vertical Concealed Clip Application

Product Guide. Latitude Series High-Performance Exterior Metal Wall Panels for Horizontal and Vertical Concealed Clip Application Product Guide Latitude Series High-Performance Exterior Metal Wall Panels for Horizontal and Vertical Concealed Clip Application Blank Text www.imetco.com (800) 646-3826 Page 2 Contents Standard Profile...

More information

Mott Manufacturing Limited

Mott Manufacturing Limited Mott Manufacturing Limited 452 Hardy Road, Brantford, Ontario, Canada, N3T 5L8. Telephone: 519-752-7825 Fax: 519-752-2895 Web Site: www.mott.ca Fume Hood Performance Test Test Date: 9-Sep-08 Model Number:

More information

Certification of AMS acc. EN 15267, Part 3 - Overview and First Experience -

Certification of AMS acc. EN 15267, Part 3 - Overview and First Experience - Certification of AMS acc. EN 15267, Part 3 - Overview and First Experience - Dr. Wolfgang Jockel, Martin Schneider, TÜV Rheinland Group, D-51105 Cologne / Germany 1. Introduction A new basis for the certification

More information

Warranty. The VELUX promise. Specific limited product warranty 10-year No Leak installation warranty Warranty claim procedure

Warranty. The VELUX promise. Specific limited product warranty 10-year No Leak installation warranty Warranty claim procedure Warranty The VELUX promise Specific limited product warranty 10-year No Leak installation warranty Warranty claim procedure Specific limited product warranty 20 year limited warranty VELUX insulating glass

More information

Summary of Substantive Changes between the 2004 e1 and 2017 editions of ASSE 1011, Hose Connection Vacuum Breakers

Summary of Substantive Changes between the 2004 e1 and 2017 editions of ASSE 1011, Hose Connection Vacuum Breakers Summary of Substantive Changes between the 2004 e1 and 2017 editions of ASSE 1011, Hose Connection Vacuum Breakers Presented to the IAPMO Standards Review Committee on October 15, 2018 General: The changes

More information

SECTION BUTTERFLY VALVES

SECTION BUTTERFLY VALVES SECTION 15112 BUTTERFLY VALVES PART 1 GENERAL 1.01 SUMMARY A. All butterfly valves shall be of the tight closing, rubber seated type and fully comply with the latest revision of AWWA Standard C504, Class

More information

Bermad Pressure Reducing. Model: 42T

Bermad Pressure Reducing. Model: 42T Bermad Pressure Reducing Pilot Operated Pressure Control Valve Model: 42T Installation Operation Maintenance Manual (IOM) REV. 27.7.17 Page 1 of 12 Safety First BERMAD believes that the safety of personnel

More information

September 2018 Pressure Test

September 2018 Pressure Test September 2018 Pressure Test The requirements for a pressure test are found in NFPA 54, Chapter 8, Sections 8.1-8.1.53 of the 2012 edition. A pressure test shall not be confused with a leak check. The

More information

1811G/H PITOT-STATIC TEST SET

1811G/H PITOT-STATIC TEST SET 1811G/H PITOT-STATIC TEST SET USER INSTRUCTION MANUAL M/N: 1811G/H, P/Ns: 101-00165 101-00168 101-00169 Doc. P/N: 56-101-00165_00168_00169 Revision C December 9, 2014 BARFIELD, INC. Corporate Headquarters

More information

Product Test Report F.A. Lennon Drive December 2015 Solon, Ohio U.S.A. Page 1 of 7. Valve Series Description Test Pressure Test Qty.

Product Test Report F.A. Lennon Drive December 2015 Solon, Ohio U.S.A. Page 1 of 7. Valve Series Description Test Pressure Test Qty. Product Report Solon, Ohio 44139 U.S.A. Page 1 of 7 TITLE Fugitive and Seat Leakage Performance Type of Swagelok VB05 Block and Bleed Process Interface Valves Witnessed by a Third Party PRODUCT TESTED

More information

Tex-616-J, Construction Fabrics

Tex-616-J, Construction Fabrics Contents: Section 1 Overview... Section s...3 Section 3 Archived Versions...10 Texas Department of Transportation 1 06/00 1/07 Section 1 Overview Effective dates: June 000 December 007. Section 1 Overview

More information

This program shall contain, as a minimum, the following components:

This program shall contain, as a minimum, the following components: Section 1: Introduction 1.1 Policy It is the policy of the Pemberton Township Fire Department to maintain comprehensive safety and occupational health programs predicted upon sound engineering, education,

More information

HYDROSTATIC LEAK TEST PROCEDURE

HYDROSTATIC LEAK TEST PROCEDURE This information is proprietary and shall not be disclosed outside your organization, nor shall it be duplicated, used or disclosed for purposes other than as permitted under the agreement with Kinetics

More information

STANDARD OPERATING PROCEDURE

STANDARD OPERATING PROCEDURE TO BE USED BY PROPERLY TRAINED AND AUTHORIZED PERSONNEL ONLY This document serves as a guide for the probable hazards of this space and how to remediate those hazards. It is important to remember that

More information

1.0 PURPOSE 2.0 SCOPE 3.0 DEFINITIONS. ANSI: American National Standards Institute. CCC: Chemical Control Centre

1.0 PURPOSE 2.0 SCOPE 3.0 DEFINITIONS. ANSI: American National Standards Institute. CCC: Chemical Control Centre Revision Date: 5/17/2016 Page: 1 of 13 Health & Safety has developed the emergency eyewash & safety shower equipment procedure which will be implemented in 3 phases over the next four years. Phase 1 will

More information

Sample Procurement Specifications for Aluminum Traffic Control Signs and Components

Sample Procurement Specifications for Aluminum Traffic Control Signs and Components Sample Procurement Specifications for Aluminum Traffic Control Signs and Components These sample procurement Specifications were prepared by the American Traffic Safety Services Association (ATSSA) Sign

More information

Zonal Pressurization Diagnostics (ZPD)

Zonal Pressurization Diagnostics (ZPD) Zonal Pressurization Diagnostics (ZPD) Matt Sharpe, Vermont Energy Investment Corporation Loose Presentation Outline Air flow fundamentals How to exploit these basic principles (i.e., zonal pressure diagnostics)

More information

Introduction (2 of 2) Systematic approach should be followed

Introduction (2 of 2) Systematic approach should be followed Origin Determination Knowledge Objectives (1 of 2) Describe the recommended techniques for determining the origin of a fire. Explain the need for fire scene reconstruction. Develop and test origin hypotheses.

More information

Pressure Relief Device Investigation Testing Lessons Learned

Pressure Relief Device Investigation Testing Lessons Learned Pressure Relief Device Investigation Testing Lessons Learned 2018 General Meeting Presentation Prepared by: Joseph F. Ball, P.E. Overview National Board Investigation Testing Process Summary of Results

More information

ASTATT10 Carry out air tightness testing on large and complex, high rise and phased hand over zonal buildings

ASTATT10 Carry out air tightness testing on large and complex, high rise and phased hand over zonal buildings Carry out air tightness testing on large and complex, high rise and phased Overview This standard is for those who carry out air tightness testing and inspection of large and complex buildings, high rise

More information

Calcimeter Instruction Manual

Calcimeter Instruction Manual Hohner (UK - Canada - Texas) Calcimeter Instruction Manual The Hohner Calcimeter is based on industry standard versions, and is used to measure the calcium carbonate and magnesium carbonate in samples.

More information

ORDINANCE NO AN ORDINANCE OF THE CITY OF FOLSOM AMENDING CHAPTER OF THE FOLSOM MUNICIPAL CODE CONCERNING SWIMMING POOLS, SPAS AND HOT TUBS

ORDINANCE NO AN ORDINANCE OF THE CITY OF FOLSOM AMENDING CHAPTER OF THE FOLSOM MUNICIPAL CODE CONCERNING SWIMMING POOLS, SPAS AND HOT TUBS ORDINANCE NO. 1267 AN ORDINANCE OF THE CITY OF FOLSOM AMENDING CHAPTER 14.28 OF THE FOLSOM MUNICIPAL CODE CONCERNING SWIMMING POOLS, SPAS AND HOT TUBS THE CITY COUNCIL OF THE CITY OF FOLSOM HEREBY DOES

More information

Standard Pneumatic Test Procedure Requirements for Piping Systems

Standard Pneumatic Test Procedure Requirements for Piping Systems the pressure equipment safety authority Standard Pneumatic Test Procedure Requirements for Piping Systems AB-522 Edition 2, Rev. 1 Issued 2016-10-24 Table of Contents FOREWORD... 1 1.0 INTRODUCTION...

More information

TRAFFIC CONTROL DEVICES

TRAFFIC CONTROL DEVICES TRAFFIC CONTROL DEVICES SIGNS Temporary traffic control work zone signs include regulatory, warning and guide signs utilized to provide regulations, warnings and guidance information to road users impacted

More information

Engineering Data Sheet

Engineering Data Sheet Page 1 of 6 CE MARKING AND THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC Valves must be installed into a well designed system and it is recommended that the system be inspected in accordance with the appropriate

More information

American Society of Sanitary Engineering PRODUCT (SEAL) LISTING PROGRAM

American Society of Sanitary Engineering PRODUCT (SEAL) LISTING PROGRAM American Society of Sanitary Engineering PRODUCT (SEAL) LISTING PROGRAM ASSE STANDARD #1064-2006 (R2011) - REVISED: 2011 Backflow Prevention Assembly Field Test Kits MANUFACTURER: CONTACT PERSON: E-MAIL:

More information

TEST SPECIFICATION NYT-909-C

TEST SPECIFICATION NYT-909-C 748 Starbuck Ave, Watertown, NY 13601 Phone: +1-315-786-5200 Engineering Fax: +1-315-786-5673 TEST SPECIFICATION NYT-909-C CODE OF TESTS FOR TESTING "AB" TEST RACK P/N 702546 & 702612 ISSUE NO. 5 1.0 THE

More information

Warning: NEVER ALTER TEST EQUIPMENT

Warning: NEVER ALTER TEST EQUIPMENT PAGE 1 OF 6 General: Pressure Testing Shop Built Tanks Pressure testing tanks with either positive pressure or vacuum can be a very dangerous exercise. It is important to understand the equipment involved

More information

Modular skylight warranty

Modular skylight warranty Modular skylight warranty Specific limited product warranty 10 year limited warranty (a) (b) (c) VELUX insulating glass For a period of (10) ten years from the date of purchase, VELUX warrants to the end-user

More information

What is Pressure? Residential Pressure Measurement

What is Pressure? Residential Pressure Measurement What you will learn What is pressure? The importance of pressure in houses Get to know your pressure gauge Using a digital pressure gauge Pressure gauge tests on houses Pressure gauge troubleshooting What

More information

Advanced Code Requirements for Residential Construction Internet Course

Advanced Code Requirements for Residential Construction Internet Course Course Syllabus: Course Title: Number of Classroom Hours: Method of Presentation: Intended Target Group: Advanced Code Requirements for Residential Construction Internet Course 1; 1 CEU Online Course Florida

More information

WSC Performance Standard and Recommended Installation Procedures for Sanitary Water Well. Pitless Adapters, Pitless Units, And Well Caps

WSC Performance Standard and Recommended Installation Procedures for Sanitary Water Well. Pitless Adapters, Pitless Units, And Well Caps WSC Performance Standard and Recommended Installation Procedures for Sanitary Water Well Pitless Adapters, Pitless Units, And Well Caps History of the WSC PAS Standard he Water Systems Council (WSC) has

More information

IH Report: SUFMO 08/09-CC21 1/27/2009 Stanford University Gas Cabinet Installation and Performance Criteria

IH Report: SUFMO 08/09-CC21 1/27/2009 Stanford University Gas Cabinet Installation and Performance Criteria Stanford University Gas Cabinet Installation and Performance Criteria I. Application Gas cabinets are ventilated enclosures that are used to isolate hazardous gas cylinders from the surrounding work place.

More information

STANDARD OPERATING PROCEDURES. Andersen Instruments Federal Reference Method (FRM) Ambient Particulate (PM 10 /PM 2.

STANDARD OPERATING PROCEDURES. Andersen Instruments Federal Reference Method (FRM) Ambient Particulate (PM 10 /PM 2. STANDARD OPERATING PROCEDURES Andersen Instruments Federal Reference Method (FRM) Ambient Particulate (PM 10 /PM 2.5 ) Sampler (RAAS) AMBIENT AIR MONITORING PROGRAM for the 130 LIBERTY STREET DECONSTRUCTION

More information

Mine Dust Management Plan

Mine Dust Management Plan Mine Dust Management Plan 1 PURPOSE The primary purpose of the mine dust management plan is to protect the health of people at work by ensuring that exposures to fugitive dust containing respirable silica

More information

Un-Pressurized Orefice Fittings FIO EZ. Parts List and Operation Instructions TECHNICAL MANUAL. Dn 2-6 Class Lbs

Un-Pressurized Orefice Fittings FIO EZ. Parts List and Operation Instructions TECHNICAL MANUAL. Dn 2-6 Class Lbs Un-Pressurized Orefice Fittings FIO EZ Parts List and Operation Instructions TECHNICAL MANUAL Dn 2-6 Class 150-600 Lbs US US 2 FIO EZ - MT 108-US - 05-2016 FIO EZ Important Instructions US Pietro Fiorentini

More information

Equipment Accuracy / Selection

Equipment Accuracy / Selection Revision 5.0: Included the PPP program for clarification. Revision 6.0: Update references for CTL PDSH 251B to CTL DSH 251E" Added leakage current tolerances for values above 5KHz For Client Labs Purpose

More information

Withstanding High Wind Impacts on Biocontainment Facilities

Withstanding High Wind Impacts on Biocontainment Facilities Withstanding High Wind Impacts on Biocontainment Facilities ABSA International 59 th Annual Biological Safety Conference October 5, 2016 Eugene Cole Program Technical Director NBAF Program Executive Office

More information

Testing Procedures of Watertight Compartments

Testing Procedures of Watertight Compartments (1996) (Rev.1 Feb 2001) (Rev.2 May 2001) (Rev.3 May 2010) (Rev.4 Aug 2012) Testing Procedures of Watertight Compartments.1 Application Revision 4 of this UR is to be complied with in respect of the testing

More information

SECTION PRESSURE TESTING OF PIPING

SECTION PRESSURE TESTING OF PIPING SECTION 15044 PRESSURE TESTING OF PIPING PART 1 - GENERAL 1.01 DESCRIPTION A. Scope of Work: This section specifies the leakage and pressure testing of piping. B. Testing Records: PART 2 - PRODUCTS 2.01

More information

GETZ EQUIPMENT INNOVATORS PART NO.: 9G59554 MODEL: MS 36 SC-R HYDROSTATIC TEST PUMP

GETZ EQUIPMENT INNOVATORS PART NO.: 9G59554 MODEL: MS 36 SC-R HYDROSTATIC TEST PUMP GETZ EQUIPMENT INNOVATORS PART NO.: 9G59554 MODEL: MS 36 SC-R HYDROSTATIC TEST PUMP LIMITED WARRANTY Getz Equipment Innovators warrants its products, and component parts of any product manufactured by

More information

QLD Recognised Standard 14 - Monitoring Respirable Dust in Coal Mines CHECKLIST TO HELP YOU MONITOR YOUR WORKPLACE

QLD Recognised Standard 14 - Monitoring Respirable Dust in Coal Mines CHECKLIST TO HELP YOU MONITOR YOUR WORKPLACE QLD Recognised Standard 14 - Monitoring Respirable Dust in Coal Mines CHECKLIST TO HELP YOU MONITOR YOUR WORKPLACE STEP 1 Setting Up Your Program Setting Up Your Monitoring Program Is there a documented

More information

MUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5.

MUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5. Installation Instructions manual MUELLER table of contents PAGE A-20814 Wall Type General Information 2 Technical Data/ Dimensions Installation 4-5 Maintenance 6 Parts 7 Indicator Post! WARNING: 1. Read

More information

What is the D-ifference in D-value?

What is the D-ifference in D-value? Volume 3, Number 3 September 2006 Garrett Krushefski Scientific & Technical Services Manager What is the D-ifference in D-value? Occasionally our Customer Service Department receives a request for biological

More information

Kansas State University Fume Hood Operation

Kansas State University Fume Hood Operation FUME HOODS 2009, PAGE 1 FUME HOODS Kansas State University Fume Hood Operation One of the primary safety devices in a laboratory is a chemical fume hood. A well-designed hood, when properly installed and

More information

Other Si min/max. Cr min/max. 0.4/ / / / Bal.

Other Si min/max. Cr min/max. 0.4/ / / / Bal. 178.46 Specification 3AL seamless aluminum cylinders. (a) Size and service pressure. A DOT 3AL cylinder is a seamless aluminum cylinder with a imum water capacity of 1000 pounds and minimum service pressure

More information

Smart Water Application Technologies (SWAT) TM

Smart Water Application Technologies (SWAT) TM Smart Water Application Technologies (SWAT) TM Equipment Functionality Test Protocol Version 2.3 June 2014 SWAT Committee 8280 Willow Oaks Corporate Drive Suite 400 Fairfax, VA 22031 www.irrigation.org

More information

EVALUATION SUBJECT: DIVISION: HEATING, VENTILATING AND AIR CONDITIONING (HVAC) SECTION: HVAC DUCTS AND CASINGS.

EVALUATION SUBJECT: DIVISION: HEATING, VENTILATING AND AIR CONDITIONING (HVAC) SECTION: HVAC DUCTS AND CASINGS. ICC-ES Report PMG-1171 Reissued 11/2018 This report is subject to renewal 11/2019 EVALUATION SUBJECT: UNDERGROUND SINGLE WALL & DOUBLE WALL INSULATED DUCT FOR HVAC DIRECT BURIAL APPLICATIONS AND UNDERGROUND

More information

"STEEL FRAMED" ALUMINUM PANEL SHIELDS

STEEL FRAMED ALUMINUM PANEL SHIELDS "STEEL FRAMED" ALUMINUM PANEL SHIELDS MANUFACTURE S TABULATED DATA 3330 S. Sam Houston Pkwy Houston, Texas 77047 (713)943-0750 USA Toll Free 1-800-231-6662 Fax (713)943-8483 Www.speedshore.com PRINTED

More information

CTG Certification Protocol -- Version 3.0 SUMMARY

CTG Certification Protocol -- Version 3.0 SUMMARY Date of Test: Test Report Number: SUMMARY Date of Prior Certification: Certified by: Re-certification Due Date: Unit Description: Make : Model: Serial Number: Location: CERTIFIER INFORMATION Name: Client

More information

OS2 F R A M E S E R I E S

OS2 F R A M E S E R I E S P E R F O R M A N C E S P E C I F I C A T I O N S. F R A M E S E R I E S Window - Single OR Double Sash (Inswing Casement) Assessment of ification 4 Joint Permeability 0.75 m³/hm Overall Area Permeability

More information

Related Products: Auto Drain Valve. Model/Specifications. Model

Related Products: Auto Drain Valve. Model/Specifications. Model Related Products: Auto Drain Valve /600 Drainage is automatically discharged in a reliable manner, without requiring human operators. Highly resistant to dust and corrosion, operates reliably, and a bowl

More information

Section 1.3: PRESSURE VESSEL COMPONENTS AND SYSTEMS AND COMPRESSED GAS CYLINDERS

Section 1.3: PRESSURE VESSEL COMPONENTS AND SYSTEMS AND COMPRESSED GAS CYLINDERS Section 1.3: PRESSURE VESSEL COMPONENTS AND SYSTEMS AND COMPRESSED GAS CYLINDERS TABLE OF CONTENTS Page A. Regulations, Standards and References 1.3-2 B. Scope 1.3-2 C. Design Features for the Storage

More information

ASTM in the Real World

ASTM in the Real World ASTM in the Real World Todd Mikkelson The RM Group, LLC 1350 north arm Drive, Mound, Minnesota, 55364 Phone: 952-220-5639 e-mail: todd@sprayrack.com 3 1 s t R C I I n t e R n a t I o n a l C o n v e n

More information

Rigel 601 CHECKBOX. Instruction Manual. 348A551 Issue 2.0. April Seaward Electronic Ltd. Issue 2.0

Rigel 601 CHECKBOX. Instruction Manual. 348A551 Issue 2.0. April Seaward Electronic Ltd. Issue 2.0 Rigel 601 CHECKBOX Instruction Manual 348A551 Issue 2.0 April 2006 2006 Seaward Electronic Ltd. Issue 2.0 Limited Warranty & Limitation of Liability Rigel Medical guarantees this product for a period of

More information

Laboratory Ventilation. Environmental, Health, and Safety

Laboratory Ventilation. Environmental, Health, and Safety No.: BCF020.054 Page: 1 of 7 RECORD OF REVISIONS Date Rev # Details of Change 09/13 1 Updated job titles to reflect ICON job descriptions. Added a definition for Approved Ventilation Contractor and included

More information

APPLYING VARIABLE SPEED PRESSURE LIMITING CONTROL DRIVER FIRE PUMPS. SEC Project No

APPLYING VARIABLE SPEED PRESSURE LIMITING CONTROL DRIVER FIRE PUMPS. SEC Project No APPLYING VARIABLE SPEED PRESSURE LIMITING CONTROL DRIVER FIRE PUMPS SEC Project No. 1803007-000 November 20, 2006 TABLE OF CONTENTS I. ABSTRACT...1 II. INTRODUCTION...1 III. HISTORY...2 IV. VARIABLE SPEED

More information

DEVELOPMENT AND TESTING OF AIR EXCHANGE RATE METHODS TO IMPROVE COST EFFECTIVENESS WHILE MAINTAINING ACCURACY

DEVELOPMENT AND TESTING OF AIR EXCHANGE RATE METHODS TO IMPROVE COST EFFECTIVENESS WHILE MAINTAINING ACCURACY DEVELOPMENT AND TESTING OF AIR EXCHANGE RATE METHODS TO IMPROVE COST EFFECTIVENESS WHILE MAINTAINING ACCURACY Prepared by: Joachim Eberharter (Joachim.Eberharter@tetratech.com) and James Elliot (Tetra

More information

CORESTA RECOMMENDED METHOD N 6

CORESTA RECOMMENDED METHOD N 6 CORESTA RECOMMENDED METHOD N 6 DETERMINATION OF VENTILATION DEFINITIONS AND MEASUREMENT PRINCIPLES (2015 Revision September 2016) 1. SCOPE This CORESTA Recommended Method specifies a method for the determination

More information

Wind Flow Validation Summary

Wind Flow Validation Summary IBHS Research Center Validation of Wind Capabilities The Insurance Institute for Business & Home Safety (IBHS) Research Center full-scale test facility provides opportunities to simulate natural wind conditions

More information