Ag Leader Technology Proportional Valve
|
|
- Arlene Briggs
- 6 years ago
- Views:
Transcription
1 NOTE: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity Valve Assembly Open-Center Manifold Open-Center Valve Parker D3FW Valve Assembly Closed-Center Manifold Closed-Center Valve Parker D3FW Important Notices Please carefully follow these step-by-step instructions. If you have questions, contact Ag Leader Technology at x 1. Direction words (LEFT and RIGHT) are commonly used when describing an installation procedure. Interpret direction words as if standing behind equipment facing forward. Signal words (DANGER, WARNING, CAUTION and NOTE) are provided to draw attention to information that is important for the safe/correct installation and operation of this product. Indicates an imminently hazardous situation that, if not avoided, is likely to result in serious injury or even death. Indicates a potentially hazardous situation that, if not avoided, could result in serious injury or even death. Indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. CAUTION Indicates practices that may result in property damage, but do not involve personal injury. NOTE The preferred signal word to address practices not involving property damage, or personal injury. Section Contents Item Page Additional Parts Required (Not Included With s) 2 Hydraulic Schematics 3 Installing the 4 PN: May 2013 Rev A 1
2 Ag Leader Technology Preliminary Installation Requirements Implement must be lowered to the ground on a stable and level surface before beginning instructions. Do not rely on hydraulic system alone to support implement. Hydraulics can fail resulting in serious injury or death. Make sure the valve block matches the tractor hydraulic system (i.e. use a closed center block with a tractor that has a closed center hydraulic system). Proportional valves are designed to be used only in conjunction with the Intellislope pitch control system, and shouldn t be used with any other systems. Read these instructions completely before beginning installation. Additional Parts Required to Make Proportional Valve Functional Part Part Number Hydraulic Hoses - 1/2, 3500 PSI Hydraulic Hoses w/ #8 FJIC * Fittings when connecting to the (Reference the Schematic) Mounting Hardware 3/8-16 X (2 + Plate Thickness) for * Closed Center Valves and 5/16-18 X (3 + Plate Thickness) for Open Center Valves Harness Pitch Control (If not already in use) * Ag Leader Does Not Sell These Items 2 May 2013 Rev A
3 Figure 1. Hydraulic Schematics PN: May 2013 Rev A 3
4 Ag Leader Technology 1. Initially mount the. Make sure the letters P and T on the valve block are facing the tractor. If the plow does not have a mounting plate, construct one similar to the plate in Figure 2. Figure 2. Mounted NOTE: Refer to the schematic when connecting the hydraulics. If the plow moves in the wrong directions, refer to the Intellislope manual for changing the settings. 2. Make sure Pressure is connected to the P and Tank to the T on the valve block as shown in Figure 3. Figure 3. Valve Block 4 May 2013 Rev A
5 3. Connect the Pitch Cylinders to the. Port A on the valve block connects with the extend ports on the cylinders. Port B connects to the retract ports on the cylinders. 4. Connect the wire harness to the correct pitch solenoid as shown in Figure 4. A B Figure 4. Connections NOTE: Tie up all hydraulic hoses along with removing any dirt from the tractor remote connections and pioneer fittings prior to connection with tractor remotes. Valve tolerances are very tight and debris can cause malfunction of valves. Make sure hydraulic hoses are connected to the tractor s primary hydraulic remote (it is NOT recommended to use a power beyond type remote on the tractor). This remote will need to have its flow (speed) turned up all the way if possible. Revision History Date Revision Initials Changes May 2013 A AWP - Initial Release PN: May 2013 Rev A 5
ISO DownForce Valve Block Tee (Kinze 4000)
NOTE: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity Hydraulic Kit ISO DF Frame Valve Block Tee (Kinze 4000) 4101301 1 Hydraulic hose -08
More informationElectro-hydraulic control valve - Calibrate - Remote valve calibration
Electro-hydraulic control valve - Calibrate - Remote valve calibration T9.390, T9.450, T9.505, T9.560, T9.615, T9.670 The CAN-based EHR valves need to be calibrated prior to use. Before calibrating the
More informationExtendAire TM II. Intermediate Pressure Accessory Kit USER INSTRUCTIONS
ExtendAire TM II Intermediate Pressure Accessory Kit USER INSTRUCTIONS THIS MANUAL MUST BE CAREFULLY READ AND FOLLOWED BY ALL PERSONS WHO HAVE OR WILL HAVE THE RESPONSIBILITY FOR USING OR SERVICING THIS
More informationAWG Fittings LLC. Pressure Relief Valve Up to 250 PSI. Product Number Read this instruction manual before use.
AWG Fittings LLC Pressure Relief Valve Up to 250 PSI Product Number 30004033 Read this instruction manual before use. Using this device without t understanding di this products operation and care may lead
More informationInstallation and Service Manual
An Actuant Company Installation and Service Manual Heavy Duty Hydraulic Stabilization Legs CONTENTS Part # 3010003129 REV 0D Section Page 1.0 Receiving Instructions 2 2.0 Safety Issues 2 3.0 Hydraulic
More information42045 Heavy Duty ADA Base Model Kit: 85/105 PSI (ADA Compressor Only) Heavy Duty ADA Base Model Kit: 110/145 PSI (ADA Compressor Only)
42045 Heavy Duty ADA Base Model Kit: 85/105 PSI (ADA Compressor Only) 42047 Heavy Duty ADA Base Model Kit: 110/145 PSI (ADA Compressor Only) 45052 Constant Duty ADA Base Model Kit: 85/105 PSI (ADA Compressor
More informationInstruction & Parts Manual
Large Capacity Spring Rewind Hose Reel Instruction & Parts Manual Model 88402 3/4 Hose Capacity Model 88402DEF 3/4 Hose Capacity Model 88403 1/2 Hose Capacity Model 88405 1 Hose Capacity P/N 88403-75L
More informationSection 4: Sequence valve adjustments
Section 4: Sequence valve adjustments 290509 For models 40 / 45 / 45R / 50 / 60 Jan 30 2014 - Page Sequence valve manifold (pic) 2 Sequence valve overview 2 Sequence valve manifold flow chart 3 Trouble
More informationDischarge Relief Valve Operation & Maint.
Relief Valve Operation & Maint. CZ Series Centrifugal Fire Relief svalve Operation and Maintenance Instructions 1410 Operation and Maintenance Form No. F-1031 Section 2302.6 2111 Issue Date 04/90 11/95
More informationINSTRUCTION MANUAL FOR UNDERWATER OPERATION
INSTRUCTION MANUAL FOR UNDERWATER OPERATION FOR HYDRAULIC HAMMER MODELS E-218A E-224A Use Genuine NPK Parts 7550 Independence Drive Walton Hills, OH 44146-5541 Phone (440) 232-7900 Toll-free (800) 225-4379
More informationThis section provides general information and recommendations required prior to installing, operating or maintaining your KAT Master Hitch.
WBM Parts and Installation Manual for KAT Master Hitch General Information This section provides general information and recommendations required prior to installing, operating or maintaining your KAT
More informationINSTRUCTION MANUAL FOR UNDERWATER OPERATION
INSTRUCTION MANUAL FOR UNDERWATER OPERATION FOR HYDRAULIC HAMMER MODELS: H3XA, H4XE/4XL, H6XA, H7X Use Genuine NPK Parts 7550 Independence Drive Walton Hills, OH 44146-5541 Phone (440) 232-7900 Toll-free
More informationWBM Installation Manual KAT Master Hitch
WBM Installation Manual KAT Master Hitch General Information This section provides general information and recommendations required prior to installing, operating or maintaining your KAT Master Hitch.
More informationAllspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0)
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW Tel +44 (0)1254 615100 www.allspeeds.co.uk HP690A Intensifier Panel including the following versions: Model Intensification
More informationLecture 19 PRESSURE-CONTROL VALVES [CONTINUED]
Lecture 19 PRESSURE-CONTROL VLVES [CONTINUED] 1.5 Counterbalance Valve Schematic diagram of counterbalance valve is shown in Fig. 1.14. These normally closed valves are primarily used to maintain a back
More informationPressure Dump Valve Service Kit for Series 2300 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit
More informationLinde Hydraulics Corporation, P.O. Box 82, Canfield, Ohio 44406
Page 1 / 5 BPV..HF with Pressure Cut-off BPV..EH with Pressure Cut-off PURPOSE The purpose of the "PRESSURE CUT-OFF" is to prevent large amounts of oil from bleeding over a relief valve, which reduces
More informationACCESSORY KIT INSTALLATION INSTRUCTIONS
ACCESSORY KIT INSTALLATION INSTRUCTIONS 1NP0680 - PROPANE CONVERSION FOR USE WITH MODELS: PM8, PC8, PM9, PC9, FL9M, FL9C, FC9M, FC9C This conversion kit is to be installed by a qualified service agency
More informationHYDRAULIC WINCH FOR AUGERS UP TO WR10 X 71 / W130 X 41 ASSEMBLY & OPERATION MANUAL
HYDRAULIC WINCH ASSEMBLY & OPERATION MANUAL Read this manual before using product. Failure to follow instructions and safety precautions can result in serious injury, death, or property damage. Keep manual
More informationDual Solenoid Gas Valve Installation
Installation IMPORTANT: These instructions are intended as a guide for qualified personnel installing or servicing FLYNN Gas Products. Carefully follow all instructions in this bulletin and all instructions
More informationHot Tapping Machine. OPERATIONS MANUAL and OPERATING INSTRUCTIONS
262-2040 Hot Tapping Machine For performing 1/4 6 Hot taps 285 psi or less. Municipal Water, Sewage, & Building Services Use OPERATIONS MANUAL and OPERATING INSTRUCTIONS WARNING: These instructions are
More informationInstruction sheet for Hydraulic Cylinder
Oper at or smanual 1088710891 Hydr aul i ccyl i nder s Instruction sheet for Hydraulic Cylinder NOTE PLEASE READ AND FOLLOW THIS INSTRUCTION BEFORE YOU USE Yellow Jackit CYLINDERS. Carefully inspect all
More informationAIR DISTRIBUTOR. PART NUMBER (Including, but not inclusive) AD28483-_ALB, AD28563-_ALB, AD36097-_ALB, AD36098-_ALB, AD28485-_ALB
Manual #: MM-AD001 12/5/11 Rev. A Page 1 of 8 PART NUMBER (Including, but not inclusive) AD28483-_ALB, AD28563-_ALB, AD36097-_ALB, AD36098-_ALB, AD28485-_ALB Manual #: MM-AD001 12/5/11 Rev. A Page 2 of
More informationINTERNAL LEAKAGE CHECK OF THE FLIGHT GMA
SU/GP-B P0931 Rev A STANFORD UNIVERSITY W.W. HANSEN EXPERIMENTAL PHYSICS LABORATORY GRAVITY PROBE B, RELATIVITY GYROSCOPE EXPERIMENT STANFORD, CALIFORNIA 94305-4085 INTERNAL LEAKAGE CHECK OF THE FLIGHT
More informationBRAKE SYSTEM BLEEDING
BRAKE SYSTEM BLEEDING 1988 Jeep Cherokee 1988 BRAKES Jeep - Brake System Bleeding Cherokee, Comanche, Grand Wagoneer, Wagoneer, Wrangler BRAKE SYSTEM BLEEDING Hydraulic system bleeding is necessary any
More informationREV0709. Parts List. Hydraulic Cylinder Model MODEL C SINGLE-ACTING, SPRING RETURN HYDRAULIC CYLINDER. Max. Capacity: 55.2 Tons at 10,000 PSI
REV0709 Parts List Hydraulic Cylinder Model 10312 MODEL C SINGLE-ACTING, SPRING RETURN HYDRAULIC CYLINDER Max. Capacity: 55.2 Tons at 10,000 PSI REV0709 Item No. Part No. No. Req d Description 1 10606
More information1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT
TABLE OF CONTENTS 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT This symbol means: ATTENTION - BECOME ALERT YOUR SAFETY IS INVOLVED. When you see this symbol
More informationGeneral Information. NTA607HD Lift Assist Adjustments. Tools Required. Work Location. Notations and Conventions U B F D R B F L
Great Plains Manufacturing, Inc. 1 NTA607HD Lift Assist Adjustments Null4: When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives
More informationBLEED DOWN OF THE HIGH GMA PRESSURE
SU/GP-B STANFORD UNIVERSITY W.W. HANSEN EXPERIMENTAL PHYSICS LABORATORY GRAVITY PROBE B, RELATIVITY GYROSCOPE EXPERIMENT STANFORD, CALIFORNIA 94305-4085 BLEED DOWN OF THE HIGH GMA PRESSURE GP-B ENGINEERING
More informationAllspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0)
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW Tel +44 (0)1254 615100 www.allspeeds.co.uk SOFTLINE CUTTER SL80 PRODUCT CODE No. 980248 INSTRUCTIONS FOR INSTALLATION,
More informationCO2 Tank Conversion Kit P.N , P.N , and P.N
Foodservice Group Multiplex Beverage Equipment Installation Instructions for CO2 Tank Conversion Kit P.N. 002247, P.N. 0022505, and P.N. 0025099 Introduction The following instructions cover the installation
More informationPROPORTIONING VALVE. Model 150 INSTRUCTION MANUAL. March 2017 IMS Company Stafford Road
PROPORTIONING VALVE Model 150 INSTRUCTION MANUAL March 2017 IMS Company 10373 Stafford Road Telephone: (440) 543-1615 Fax: (440) 543-1069 Email: sales@imscompany.com 1 Introduction IMS Company reserves
More informationOPERATION MANUAL BFX-2
OPERATION MANUAL BFX-2 Brake Fluid Exchanger IMPORTANT Test drive vehicle after service to verify proper brake system performance. MAHLE Aftermarket Inc., Service Solutions 10 Innovation Drive York, PA
More informationFOR INSTALLING CO 2 BLENDER KIT (P/N IN BEER SYSTEM
IMI CORNELIUS INC One Cornelius Place Anoka, MN 55303-623 Telephone (800) 238-3600 Facsimile (612) 22-326 INSTALLATION INSTRUCTIONS FOR INSTALLING CO 2 BLENDER KIT (P/N 111612000 IN BEER SYSTEM SECONDARY
More informationFOR TM TURRET COMBAT ENGINEER VEHICLE, M728 ( ) TECHNICAL MANUAL
TECHNICAL MANUAL DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL PART 4 MAINTENANCE TURRET FOR COMBAT ENGINEER VEHICLE, M728 (2350-00-795-1797) This copy is a reprint which includes current pages
More informationTech Tips. Service Call: Adjustable Hydraulic Valves Flow controls Pressure controls Sequence valves Holding valves
Service Call: Adjustable Hydraulic Valves Flow controls Pressure controls Sequence valves Holding valves Tools Required: Flow Meter Pressure gauge Holding valve test block Wrenches for installation of
More informationDK ton, Double-acting, Die-type Crimping Tool
INSTRUCTION MANUAL DK6040 60-ton, Double-acting, Die-type Crimping Tool Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register
More informationMESP-202H INSTALLATION INSTRUCTIONS AND OWNER S MANUAL. HF and HF FEATURES VALVE FUNCTIONS ADJUSTMENTS SCHEMATICS
MESP-202H INSTALLATION INSTRUCTIONS AND OWNER S MANUAL FEATURES VALVE FUNCTIONS ADJUSTMENTS SCHEMATICS HF42407-07 and HF51912-09 Muncie Power Products, Inc. TABLE OF CONTENTS DESCRIPTION PAGE Features...
More informationPDY TON HYDRAULIC CRIMPING TOOL WARNING
OPERATORS ORS GUIDE PDY-1220 12 TON HYDRAULIC CRIMPING TOOL All information found in this guide must be read and understood before use or testing of this tool. Failure to read and understand these warnings
More informationPressure Dump Valve Service Kit for Series 3000 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 000 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00, 400, 500, and 700 applicator
More informationModelsEZU-15 & EZU-15-R. BISHAMON INDUSTRIES CORPORATION 5651 East Francis Street Ontario, California 91761, USA (909) (800)
UP P n e u m a t i c ModelsEZU-15 & EZU-15-R BISHAMON INDUSTRIES CORPORATION 5651 East Francis Street Ontario, California 91761, USA (909) 390-0055 (800) 231-3187 Table of Contents GETTING STARTED......................................
More informationWARNING WARNING WARNING. Warnings and Cautions CHEMICAL AND FIRE HAZARD MOVING PARTS ENTANGLEMENT HAZARD. General Safety Precautions
General Safety Precautions Warnings and Cautions As you read these instructions, you will see S, CAUTIONS, NOTICES and NOTES. Each message has a specific purpose. S are safety messages that indicate a
More informationWARNING: READ THE GENERAL INFORMATION MANUAL INCLUDED FOR OPERATING AND SAFETY PRECAUTIONS AND OTHER IMPORTANT INFORMATION.
GSR500 Ram Assembly General Description The GSR500 single post lift / ram uses a 3-1/4 air powered cylinder, which is welded to a heavy gauge base. It is normally used to raise and lower a fluid handling
More informationINSTRUCTION MANUAL FOR UNDERWATER OPERATION
INSTRUCTION MANUAL FOR UNDERWATER OPERATION FOR HYDRAULIC HAMMER MODELS: GH7, GH9, GH10, GH12, GH15, GH18, GH23, GH30, GH40, GH50, E208, E210A, E213, E216, E220, E225, E240A, E260A Use Genuine NPK Parts
More information100C Air Compressor Kit
10010 100C Air Compressor (standard mounting bracket, CE Spec) 10014 100C Air Compressor (no leader hose or check valve, CE Spec) 10016 100C Air Compressor (with Omega Bracket, CE Spec) IMPORTANT: It is
More informationGE Oil & Gas Model. Masoneilan* Air Lock-up Valve Instruction Manual. GE Data Classification : Public
GE Oil & Gas 77-6 Model Masoneilan* Air Lock-up Valve Instruction Manual GE Data Classification : Public THESE INSTRUCTIONS PROVIDE THE CUSTOMER/OPERATOR WITH IMPORTANT PROJECT-SPECIFIC REFERENCE INFORMATION
More informationSINORIX Valve Reconditioning
Document No. 129-097 SINORIX Valve Reconditioning Product Description These instructions explain how to recondition and fill 1-inch through 4-inch SINORIX valves. Product Numbers Verify that the appropriate
More informationIMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS CAUTION - To reduce risk of electrical shock: - Do not disassemble. Do not attempt repairs or modifications. Refer to qualified service agencies for all service and repairs.
More informationSTREAMLINE SHOP SERIES MODEL OPERATION & PARTS MANUAL
STREAMLINE SHOP SERIES MODEL 30080 OPERATION & PARTS MANUAL 1.1 WARRANTY SERVICE OR RETURNS Call 1-877-645-8227 and select option 1 between the hours of 8am to 5pm CST. 1.2 ORDER PARTS Call 1-877-645-8227
More informationSTANFORD UNIVERSITY W.W. HANSEN EXPERIMENTAL PHYSICS LABORATORY GRAVITY PROBE B, RELATIVITY GYROSCOPE EXPERIMENT STANFORD, CALIFORNIA
SU/GP-B P0930 Rev STANFORD UNIVERSITY W.W. HANSEN EXPERIMENTAL PHYSICS LABORATORY GRAVITY PROBE B, RELATIVITY GYROSCOPE EXPERIMENT STANFORD, CALIFORNIA 94305-4085 GMA SLEEP PROCEDURE GP-B ENGINEERING PROCEDURE
More informationAccu-Tab Systems 1000 Series by Axiall Corporation
Accu-Tab Systems 1000 Series by Axiall Corporation Installation and Operating Instructions Model 1050 DANGER: DO NOT MIX CHEMICALS! The Accu-Tab chlorinator is designed for use with Axiall approved tablets
More information2-port seat valves PN25 with externally threaded connections
4 379 2-port seat valves PN25 with externally threaded connections VVG55.. Valve body bronze CC491K (Rg5) DN 15...25 (½...1 ") kvs 0.25...6.3 m3/h Stroke 5.5 mm Sets of ALG.. with threaded and ALS.. with
More informationINSTALLATION OPERATION MAINTENANCE
Bermad Electrically Controlled On-Off Deluge Valve Model: 400E-3D INSTALLATION OPERATION MAINTENANCE Application Engineering BERMAD 1. Safety First BERMAD believes that the safety of personnel working
More informationLV LOADER DIRECTIONAL CONTROL VALVES INSTALLATION & USER GUIDE
LV LOADER DIRECTIONAL CONTROL VALVES INSTALLATION & USER GUIDE SPECIFICATIONS: 10 gpm (38 lpm) Nominal Capacity. Rated up to 4000 psi (275 bar). Port Sizes-Inlet/Outlet #8SAE (3/4-16). Work Ports #8SAE
More information2 Sentry MCL Installation, Operation & Maintenance
Gas Liquid & Slurry Solid & Powder Steam & Water Installation, Operation & Maintenance Manual Original Instructions Liquid Sampling Manual Low-Emission Samplers S-GA-IOM-00249-7 11-17 Sentry MCL 966 Blue
More informationTABLE OF CONTENTS... 2... 2... 3... 5... 6... 7... 7... 15... 16... 17... 17... 19... 20... 21 IMPORTANT INFORMATION Two Post Lifts 1. 2. - There can be no cracks in the slab within 36 in. of the base
More informationHyDefinition HD4070. Plasma Arc Cutting / Marking System. Product Configuration Manual Revision
HyDefinition HD4070 Plasma Arc Cutting / Marking System Product Configuration Manual 803770 Revision 1 4070.97 HD4070 Product Configuration Manual (P/N 803770) Revision 1 December, 2002 Hypertherm, Inc.
More informationOperation Manual Guillotine Cutter RC-5
Operation Manual Guillotine Cutter RC-5 Technical Specifications General Safety/Operating Instructions Using the Guillotine Cutter/Crimper Blade Change Instructions Maintenance Instructions This is a detailed
More informationLARGE DRY CHEMICAL, TWIN-AGENT, AFFF, HALON 1211, AND AQUASONIC (NITROGEN-OPERATED SYSTEMS) Pressure Regulator Test Manual
LARGE DRY CHEMICAL, TWIN-AGENT, AFFF, HALON 1211, AND AQUASONIC (NITROGEN-OPERATED SYSTEMS) Pressure Regulator Test Manual 002694 IntroductIon 8-1-11 Page 1 ForEWord This manual is intended for use with
More informationAir Tractor Preventative Maintenance Manual And Troubleshooting
1.0 Overview This maintenance schedule will assist in the maintenance and troubleshooting procedures for the Unified Industries Air Tractor. The first portion of this section details the general maintenance
More informationACCESSORY KIT INSTALLATION MANUAL
ACCESSORY KIT INSTALLATION MANUAL LP (PROPANE) CONVERSION KIT 1NP0366 FOR USE WITH MODELS: G8C & GF8 This conversion kit shall be installed by a qualified service agency in accordance with these instructions
More informationCALIBRATING THE GMA PRESSURE SENSORS AND THE ECU ENGINEERING UNIT
P0807 Rev. STANFORD UNIVERSITY W.W. HANSEN EXPERIMENTAL PHYSICS LABORATORY GRAVITY PROBE B, RELATIVITY GYROSCOPE EXPERIMENT STANFORD, CALIFORNIA 94305-4085 CALIBRATING THE GMA PRESSURE SENSORS AND THE
More informationGM-7000 Series CE Approved Gas Control Valve
Installation Instructions GM-7000 Issue Date November 9, 2012 GM-7000 Series CE Approved Gas Control Valve Installation IMPORTANT: These instructions are intended as a guide for qualified personnel installing
More informationTube-Line Accelerator Spinner Kit
Tube-Line Accelerator Spinner Kit Operator's Manual PP-00799 (19/09/11) 2 TO THE OWNER This manual contains information concerning the adjustment, assembly and maintenance of your Tube-Line Spinner Kit.
More informationPneumatic proportional controller Types M Types FM Function tested for use of the float in Ex-zone 0
Operating Manual LTIA5E Pneumatic proportional controller Types M Types FM Function tested for use of the float in Ex-zone 0 Contents 1. Safety Instructions 2. Conformity to standards 3. Technical data
More informationDeclaration of Conformity as per Directive 97/23/EC
Declaration of Conformity as per Directive 97/23/EC The manufacturer declares that:, 47906 Kempen, Germany Multi-way diverting valves Series 29a and Series 29b, with packing with lever 1. The valves are
More informationSTAND ALONE SPREADER INSTALLATION INSTRUCTIONS AND OPERATOR S MANUAL
STAND ALONE SPREADER INSTALLATION INSTRUCTIONS AND OPERATOR S MANUAL FEATURES VALVE FUNCTIONS ADJUSTMENTS SCHEMATICS Muncie Power Products, Inc. TABLE OF CONTENTS DESCRIPTION PAGE Features... 3 Hydraulic
More informationXpress L90LS Directional Control Valve. Catalog HY /UK December, 2001
Xpress L90LS Directional Control Valve Catalog HY17-8525/UK December, 2001 Catalogue HY17-8525/UK Technical Information Xpress - general information Xpress is a valve-customization service that enables
More informationRED DOT UNITS 72R SERIES. Controls. Water & Air PAGE 271
RED DOT UNITS Controls Water & Air PAGE 271 AIR SWITCHES AND CYLINDERS 72R000 Normally Closed, Opens at 2 PSIG 1 8-27 NPTF Male AIR SENSING SWITCHES RD--447-0P 72R0070 Normally Open, Closes at 21 TO 29
More informationECS Protector Nitrogen Inerting Vent (PAV-WN)
ECS Protector (PAV-WN) U.S. Pat. No. 8,636,023, 9,526,933 and 9,717,935 B2 Specifications Stock Number: Service Pressure: Regulator Setting: System Connection: Temperature Range: Dimensions: Weight: Clear
More informationAccu-Tab Systems 2000 P Series by Axiall Corporation
Accu-Tab Systems 2000 P Series by Axiall Corporation Installation and Operating Instructions Models 2075 P 2150 P For NSF/ANSI-Standard 61 NSF STANDARD 61 applications use NSF/ANSI Standard 60 listed Axiall
More informationRED DOT UNITS 72R SERIES. Controls. Water & Air PAGE 343
RED DOT UNITS Controls Water & Air PAGE 343 AIR SWITCHES AND CYLINDERS 72R000 Normally Closed, Opens at 2 PSIG 1 8-27 NPTF Male AIR SENSING SWITCHES RD--447-0P 72R0070 Normally Open, Closes at 21 TO 29
More informationKit Details Air Lift Performance HARDWARE LIST STOP!
Kit Details 27673 HARDWARE LIST Part # Description Qty 72605 4pt Fast Air Manifold - 1/4...1 27042 Gen 3 Display...1 26498-002 Electrical Harness - FastAir...1 20946 DOT 1/4 Air Line...60ft 24672 Fuse,
More informationSafe Work Instructions For Oxygen Acetylene Equipment
Safe Work Instructions For Oxygen Acetylene Equipment Policy Sponsor: Assistant Vice President Facilities Management Responsible Unit: Trade Services Approval Date: September 2010 Revisions: January 2018
More informationINSTALLATION, OPERATION AND SERVICE MANUAL ABS AIR BAG LIFT
INSTALLATION, OPERATION AND SERVICE MANUAL ABS AIR BAG LIFT P.O. Box 1058 1058 West Industrial Avenue Guthrie, OK 73044-1058 405-282-5200 FAX: 405-282-8105 www.autoquip.com Item # 830ABS Version 1.0 07/2001
More informationGeneral Information. Installation Instructions. CP1000 & FCP1000 Folding Markers. Used with: CP1000 FCP1000
Installation Instructions CP1000 & FCP1000 Folding Markers Used with: CP1000 FCP1000! When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life
More informationSTREAMLINE SHOP SERIES MODEL 30040V OPERATION & PARTS MANUAL
STREAMLINE SHOP SERIES MODEL 30040V OPERATION & PARTS MANUAL Sage Oil Vac 360 North Lakeside Drive Amarillo, TX 79118 phone: 806.372.7559 fax: 806.372.7565 1 2 1.1 WARRANTY SERVICE OR RETURNS Call 1-877-645-8227
More informationTwo-stage valve type NE
Two-stage valve type NE Product documentation Operating pressure pmax: Flow rate Qmax: 700 bar (High pressure) 80 bar (Low pressure) 25 lpm (High pressure) 180 lpm (Low pressure) D 7161 03-2017-1.0 by
More informationU.S. Patent No. 7,922,246. Patents Pending
U.S. Patent No. 7,922,246 Patents Pending 2 Table of Contents Page General Information... 3 Warnings and Cautions... 4 Tools... 6 SmartDock Parts... 6 Initial Set-Up and Adjustment... 7 Select Valve Retaining
More information310 SERIES TILT-TO-LOAD ROTATOR. The Specialist In Drum Handling Equipment
OPERATOR S MANUAL FOR MORSE TILT-TO-LOAD DRUM ROTATOR SAFETY INFORMATION: While Morse Manufacturing Co. drum handling equipment is engineered for safety and efficiency, a high degree of responsibility
More information400C & 450C DUAL PERFORMANCE VALUE PACKS
(Chrome) PART NO. 40013 (Silver) PART NO. 45012 (Chrome) PART NO. 45013 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before
More informationMedical Gas Control Panel
Medical Gas Control Panel INSTALLATION & MAINTENANCE MANUAL 255105 (Rev. 6) 2018-04 2 255105 (Rev. 6) 2018-04 1.0 User Responsibilities The information contained in this installation and operation maintenance
More informationSAILTEC, INC CONGER COURT, OSHKOSH, WI USA
OK to make this valve hand tight. Pin Mount Style Integral lies 4-5 Degrees above Horizontal. If you store your Hunter "bow down" you will get air-lock in the Integral. Slot Mount Style Pump Body "Down"
More informationService Bulletin WRSPUDF Ride-On Roller Screeds LPG Hose Replacement
Service Bulletin WRSPUDF Ride-On Roller Screeds LPG Hose Replacement Product Group: Date Issued: Service Bulletin No. Screed Bulletin Type X Mandatory /06/7 CS20624 Models/Series Affected: WRSPUDF S/N
More informationHPB25 Hydraulic Paving Breaker
INSTRUCTION MANUAL HPB25 Hydraulic Paving Breaker Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product at www.greenlee.com
More informationKFI Approved. High Pressure CO2 System Technical Datasheets
KFI Approved High Pressure CO2 System Technical Datasheets CONTENTS CO 2 CYLINDER 1 CYLINDER VALVE 3 NEEDLE VALVE 4 FLEXIBLE HOSE 5 SAFETY VALVE 6 SELECTOR VALVE 7 ACTUATING DEVICE 9 DISCHARGE NOZZLE 10
More informationPressure-limiting valve and pre-load valve type MVG, MVE and MVP
Pressure-limiting valve and pre-load valve type MVG, MVE and MVP Product documentation Directly controlled Operating pressure pmax: Flow rate Qmax: 700 bar 8 lpm D 3726 02-2016-1.3 by HAWE Hydraulik SE.
More informationDANGER. AMK-100R LIFTING JACK User Information Manual DANGER. AMKUS RESCUE SYSTEMS
Understand manual before use. Operating AMKUS Rescue Systems without understanding the manual, receiving proper training, and using appropriate personal protective equipment is a misuse of AMKUS equipment.
More informationAllspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0)
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW Tel +44 (0)1254 615100 www.allspeeds.co.uk SOFT LINE CUTTER SL55 PRODUCT CODE No. 980504 INSTRUCTIONS FOR INSTALLATION,
More informationCNG/LPG Vehicles Emergency First Response Guide
CNG/LPG Vehicles Emergency First Response Guide TABLE OF CONTENTS Introduction... 1 In Case of Fire... 1 Safety Information... 2 Identifying a CNG/LPG Vehicle... 2-3 CNG Safety... 4 LPG Safety... 5 IMPCO
More informationKirby Morgan Manifold Block Monthly Inspection and Maintenance Checklist A2.2 B WARNING
Kirby Morgan Manifold Block Monthly Inspection and Maintenance Checklist A2.2 This inspection is the minimum recommended maintenance and should be performed at least ONCE A MONTH with manifold blocks in
More informationPressure Differential Automatic Manifold For LPG. PDH1000 Series. LPG Installation & Operations Instructions
Pressure Differential Automatic Manifold For LPG PDH1000 Series LPG Installation & Operations Instructions Precise Equipment Company 3822 Market St., STE 101 Denton, Texas Phone : 800.795.8388 Precise
More informationMarschalk Model # 94000
Marschalk Model # 94000 12-volt DC Portable oil-less Air Compressor Operation Manual 27250006 REV 1 9/13/05 Table of Contents CHAPTER 1: SYSTEM DESCRIPTION... 5 FUNCTION AND THEORY... 5 SYSTEM COMPONENTS...
More informationP5513. Users Manual. Pneumatic Comparison Test Pump. Test Equipment Depot Washington Street Melrose, MA TestEquipmentDepot.
Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 TestEquipmentDepot.com P5513 Pneumatic Comparison Test Pump Users Manual PN 3963372 November 2010 2010 Fluke Corporation. All
More informationIntroduction. Part one: Identify the Hydraulic Trainer Components
The University Of Jordan School of Engineering Mechatronics Engineering Department Fluid Power Engineering Lab Experiments No.4 Introduction to Hydraulic Trainer Objective: Students will be able to identify
More informationINSTALLATION COMMISSIONING, OPERATION & MAINTENANCE MANUAL
WedgeRock RW Series Worm Gear Actuators INSTALLATION COMMISSIONING, OPERATION & MAINTENANCE MANUAL Revision 01 Date 4/3/17 Page 1 Table of Contents 1.0 INTRODUCTION... 4 1.1 PURPOSE... 4 1.2 AUDIENCE...
More informationBGA158 Series CE Approved Class A Shutoff Gas Valve
Installation Instructions BGA158 Issue Date August 24, 2011 BGA158 Series CE Approved Class A Shutoff Gas Valve Applications The BGA158 Series shutoff gas valve is an electrically operated gas valve that
More informationG92 Series BASOTROL Automatic Pilot Gas Valve
Installation Instructions Issue Date September 17, 2008 G92 Series BASOTROL Automatic Pilot Gas Valve Installation IMPORTANT: Only qualified personnel should install or service BASO Gas Products. These
More informationWARNING. RELIABLE EQUIPMENT & SERVICE CO., INC. 301 Ivyland Road Warminster, PA USA Phone: Fax:
OPERATOR'S GUIDE Pivot style control valves may be operated with one hand, leaving the second hand free to control the head. Lever locks in the forward position for tool advance, and in the rear position
More informationOperating Procedure TITON SUBSEA BOLT TENSIONER
Operating Procedure TITON SUBSEA BOLT TENSIONER B & A Hydraulics Ltd Block 1, Units 1 & 2 Souter Head Industrial Centre Souter Head Road Altens Aberdeen Phone: 01224 898955 Fax: 01224 898787 E-Mail: TITON@bahyd.co.uk
More information