600 Series. Brass Ball Valves

Transcription

1 Series Brass Ball Valves full range of economical brass ball valves intended for your common fluid control applications. vailable in standard and full port threaded, full port solder end, and full port threaded end direct mount. 100% electronically tested in the open and closed position at 80 psi 666RTTS Series Standard port threaded end in sizes ranging from 1/2 through 2 (p 2) 666FTTS Series Full port threaded end in sizes ranging from 1/4 through 4 (p 3) 666FTTW Series Full port solder end in sizes ranging from 1/2 through 3 (p 4) 667FTTS-M Series Full port, threaded end direct mount in sizes ranging from 1/4 through 4 (pp 5-8) 667FTTS Series Full port, threaded end safety vent in sizes ranging from 1/4 through 1 (p 9) Other Information pertaining to our full line of Brass Ball Valves (p 10) Marwin Valve, a division of Richards Industries 3170 Wasson Road Cincinnati, OH (f) marwin@richardsind.com

2 666RTTS Standard Port Brass Ball Valve Threaded Ends Pressure-Temperature Chart RTTS Brass ball valve intended for general service applications Standard port in sizes 1/2 through 2 Pressure rating 400 psig wog 125 psi steam Blow-out proof stem Chrome plated brass ball self-cleaning during opening and closing PTFE seats, seals and thrust washer gency approvals: CE/PE for those sizes where required; CS, CRN Pressure, PSI Temperature, F Material Specifications CH E H NPT Part No. Part Name Material No. 1 Body *Brass CuZn40Pb2 1 2 End Connection *Brass CuZn40Pb2 1 3 Ball *Brass CuZn40Pb2 Cr. Plated 1 4 Seal Material Virgin PTFE 2 5 Stem Seals Virgin PTFE 2 6 O-Ring NBR 75 Sh 1 7 Packing Gland *Brass CuZn40Pb2 1 8 Nut Plated Steel 2 9 Stem *Brass CuZn39Pb Lever Handle Plated Steel 1 *UNI EN CW617N (58Cu-40Zn-2Pb) equivalent to Hot Forging Brass UNS C37700 (60Cu-39Zn-2Pb). **UNI EN12164 CW614N (58Cu-39Zn-3Pb) equivalent to rchitectural Brass bar UNS C38500 (57Cu-40Zn-3Pb) -2- B C Size H CH C B E 1/ N15 (12) (28) (25) (14) (58) (46) (98) 3/ N20 (15) (34) (31) (14) (69) (49) (98) N25 (20) (41) (38) (17) (75) (59) (122) 1-1/ N32 (25) (52) (48) (17) (78) (63) (122) 1-1/ N40 (32) (59) (54) (17) (85) (78) (153) N50 (40) (73) (67) (17) (98) (85) (153) Cv (Kv) 8.5 (7) 12.8 (11) 30.0 (26) 41.7 (36) 82.3 (71) (108) Lbs (Kgs) 0.7 (0,3) 0.8 (0,4) 1.1 (0,5) 1.5 (0,7) 2.2 (1,0) 3.1 (1,4)

3 666FTTS Full Port Brass Ball Valve Threaded Ends Pressure-Temperature Chart FTTS Brass ball valve intended for general service applications Full port in sizes 1/4 through 4 Pressure rating psig wog 125 psi steam Blow-out proof stem Chrome plated brass ball PTFE seats, seals and thrust washer High flow capacity from full port gency approvals: CE/PE for those sizes where required; FM, UL, CS, CRN Pressure, PSI Temperature, F E Material Specifications H B C NPT CH Part No. Part Name Material No. 1 Body *Brass CuZn40Pb2 1 2 End Connection *Brass CuZn40Pb2 1 3 Ball *Brass CuZn40Pb2 Cr. Plated 1 4 Seal Material Virgin PTFE 2 5 Stem Seals Virgin PTFE 2 6 O-Ring NBR 75 Sh 1 7 Packing Gland *Brass CuZn40Pb2 1 8 Nut Plated Steel 2 9 Stem *Brass CuZn39Pb Lever Handle Plated Steel 1 *UNI EN CW617N (58Cu-40Zn-2Pb) equivalent to Hot Forging Brass UNS C37700 (60Cu-39Zn-2Pb). **UNI EN12164 CW614N (58Cu-39Zn-3Pb) equivalent to rchitectural Brass bar UNS C38500 (57Cu-40Zn-3Pb) 9 Size H CH C B E Cv (Kv) 1/ N8 (10) (23) (20) (10) (52) (45) (98) (5) 3/ N10 (10) (23) (20) (10) (52) (45) (98) (6) 1/ N15 (15) (32) (25) (14) (62) (48) (98) (16) 3/ N20 (20) (39) (31) (14) (69) (58) (122) (30) N25 (25) (49) (38) (17) (78) (62) (122) (43) 1-1/ N32 (32) (59) (48) (17) (87) (78) (153) (89) 1-1/ N40 (40) (73) (54) (17) (99) (85) (153) (230) N50 (50) (86) (67) (18) (110) (97) (162) (265) 2-1/ N65 (62) (111) (90) (30) (142) (128) (205) (540) N80 (80) (136) (105) (33) (164) (139) (205) (873) N100 (100) (166) (130) (39) (193) (161) (260) (1390) -3- Lbs (Kgs) 0.3 (0,1) 0.3 (0,1) 0.4 (0,2) 0.7 (0,3) 1.1 (0,5) 2.0 (0,9) 3.1 (1,4) 4.2 (1,9) 8.0 (3,7) 12.9 (5,9) 22.0 (10,0)

4 666FTTW Full Port Brass Ball Valve Solder Ends Pressure-Temperature Chart FTTW Sn-Pb Sn-Pb Sn-n Sn-n FTTW Brass ball valve Full port in sizes 1/2 through 3 Solder ends for copper tubing. esigned to be soft soldered into copper tubing lines without disassembly using solders with melting points not exceeding 500 F (260 C). High temperature solders will damage the seat material. Pressure rating psi wog Blow-out proof stem Chrome plated brass ball TFE seats, seals and thrust washer PTFE Seats, seals and thrust washer Locking device Pressure, PSI The valve working pressure is limited by the solder joint rating, also shown in the pressure-temperature chart. Temperature, F Material Specifications H I CWP L G I N Handle locking device not shown Part No. Part Name Material No. 1 Body Brass 1 2 Seat PTFE 1 3 Ball Brass, Cr Plated 1 4 End Cap Brass 2 5 Stem Brass, Ni Plated 2 6 Nut with washer Brass 1 7 acrotized Nut Steel, STM M1010, acrotized 1 8 Packing PTFE 2 9 Thrust Washer PTFE carbon filled Handle Steel, Plated 1 Size N I L G H Cv (Kv) 1/ N15 (16) (14) (12) (54) (26) (100) (43) (39) 3/ N20 (22) (19) (19) (69) (34) (120) (50) (56) N25 (29) (24) (23) (85) (42) (120) (54) (78) 1-1/ N32 (35) (30) (24) (97) (48) (158) (76) (91) 1-1/ N40 (41) (38) (28) (114) (57) (158) (82) (254) N50 (54) (48) (34) (138) (69) (158) (89) (349) 2-1/ N65 (67) (64) (37) (168) (84) (255) (132) (513) N80 (80) (76) (42) (193) (97) (255) (140) (621) -4- Lbs (Kgs) 0.4 (0,2) 0.7 (0,3) 1.0 (0,4) 1.6 (0,7) 2.3 (1,0) 3.7 (1,7) 9.9 (4,5) 13.9 (6,3)

5 666FTTS-M Full Port Brass Ball Valve irect Mount Pressure-Temperature Chart Brass ball valve Full port in sizes 1/4 through 4 Pressure rating 400 psig wog, 125 psi saturated steam irect mounting eliminates actuator bracket, reducing the space required for automated systems irect mounting eliminates misalignment between valve and actuator Ideally suited for air compression, waste water management and low pressure steam applications gency approvals: CE/PE for those sizes where required; CRN Material Specifications Part No. Part Name Material No. 1 Body *Brass CuZn40Pb2 1 2 End Cap *Brass CuZn40Pb2 1 3 Ball *Brass CuZn40Pb2 Cr. Plated 1 4 Seat Virgin PTFE 2 5 Thrust Washer Virgin PTFE 1 6 Bearing, Stem Virgin PTFE 1 7 O-Ring, Seat Viton 2 8 O-Ring, Stem Viton 2 9 Stem *Brass CuZn39Pb3 1 *UNI EN CW617N (58Cu-40Zn-2Pb) equivalent to Hot Forging Brass UNS C37700 (60Cu-39Zn-2Pb). **UNI EN12164 CW614N (58Cu-39Zn-3Pb) equivalent to rchitectural Brass bar UNS C38500 (57Cu-40Zn-3Pb) FTTS-M Pressure, PSI Technical Specifications Temperature, F Size Flow Cv (Kv) WOG PSI (BR) Weight, Lbs, Kgs 1/4 N8 6.3 (5,4) 0.82 (0,37) 3/8 N (6,0) 0.79 (0,36) 1/2 N (16,4) 0.66 (0,31) 3/4 N (16,4) 0.91 (0,41) 1 N (29,7) 1.55 (0,70) 1-1/4 N (43,3) 2.14 (0,97) 1-1/2 N (231,4) 3.71 (1,68) 2 N (266,6) 5.52 (2,50) 2-1/2 N (542,7) 8.83 (4,00) 3 N (814,2) (6,03) 4 N (1287) (9,77)

6 666FTTS-M Full Port Brass Ball Valve irect Mount E SQ. F 0 H B (4) 0 K holes on 0 J bolt circle Size B E F Sq. 0H ISO J K 1/ F03 N8 (9,9) (67,1) (32,5) (8,9) (8,89) (33,5) (26,1) (6,1) 3/ F03 N10 (9,9) (67,1) (32,5) (8,9) (8,89) (33,5) (36,1) (6,1) 1/ F03 N15 (14,2) (67,1) (32,5) (8,9) (8,89) (33,5) (36,1) (6,1) 3/ F03 N20 (19,1) (76,2) (34,5) (8,9) (8,89) (39,9) (36,1) (6,1) F03 N25 (24,1) (85,1) (45,5) (8,9) (8,89) (49,0) (36,1) (6,1) 1-1/ F03 N32 (30,0) (93,0) (49,0) (8,9) (8,89) (58,4) (36,1) (6,1) 1-1/ F05 N40 (37,8) (104,9) (64,0) (10,9) (10,92) (72,9) (50,0) (6,9) F05 N50 (50,0) (121,9) (73,2) (10,9) (10,92) (91,4) (50,0) (6,9) 2-1/ F07 N65 (64,0) (154,9) (88,4) (15,0) (13,97) (114,6) (70,1) (8,9) F07 N80 (76,2) (175,0) (97,8) (15,0) (13,97) (135,9) (70,1) (8,9) F07 N100 (95,0) (204,0) (116,6) (17,5) (17,02) (165,9) (70,1) (8,9) -6-

7 666FTTS-M Full Port Brass Ball Valve irect Mount J C K H B F E Size ctuator B C E F H J K Weight lbs (kgs) UT-0-1/4-1/ (88,7) (109,2) (45,7) (45,0) (20,1) (22,9) (0,9) N8-15 (66,8) (16,8) (23,6) UT-0-SR (113.3_ (139,7) (71,2) (69,6) (20,1) (40,6) (1,6) UT-0-3/ (90,4) (109,2) (45,7) (45,0) (20,1) (22,9) (0,9) N20 (76,0) (19,8) (25,4) UT-0-SR (115,1) (139,7) (71,2) (69,6) (20,1) (40,6) (1,6) UT (99,1) (109,2) (45,7) (45,0) (20,1) (22,9) (0,9) N25 (84,8) (24,4) (34,0) UT-0-SR (123,7) (139,7) (71,2) (69,6) (20,1) (40,6) (2,0) UT-0-1-1/ (102,6) (109,2) (45,7) (45,0) (20,1) (22,9) (1,4) N32 (93,0) (29,2) (37,6) UT-0-SR (127,3) (139,7) (71,2) (69,6) (20,1) (40,6) (2,0) UT-0-1-1/ (140,0) (139,7) (71,2) (69,6) (20,1) (40,6) (2,5) N40 (104,9) (35,6) (50,3) UT-2-SR (167,4) (208,3) (94,0) (97,0) (20,1) (53,3) (4,7) UT (149,1) (149,1) (71,2) (69,6) (20,1) (40,6) (3,4) N50 (121,9) (45,7) (59,4) UT-2-SR (176,5) (176,5) (94,0) (97,0) (20,1) (53,3) (5,6) UT-1-2-1/ (170,4) (162,6) (81,3) (80,5) (20,1) (45,7) (5,2) N65 (154,9) (56,4) (69,9) UT-3-SR (211,3) (271,8) (121,9) (121,4) (20,1) (68,6) (10,7) UT (180,1) (162,6) (81,3) (80,5) (20,1) (45,7) (7,9) N80 (174.8) (67,6) (79,5) UT-3-SR (221,1) (271,8) (121,9) (121,4) (20,1) (68,6) (12,9) UT (226,6) (238,8) (106,7) (108,5) (20,1) (58,4) (11,3) N100 (204,2) (82,8) (90,0) UT-3.5-SR (269,5) (327,7) (137,2) (141,5) (30,0) (73,7) (17,7) Note: ctuators sized for 80 psi actuator air supply pressure maximum valve differential pressure, and PTFE seats -7-

8 666FTTS-M Full Port Brass Ball Valve irect Mount F Clearance For Cover Removal C 1 B E Size ctuator B C E F Weights lbs (kgs) 1/4-1/ ER N8-15 (66,8) (137,9) (143,0) (101,6) (16,76) (63,5) (2,7) 3/ ER N20 (76,0) (139,7) (143,0) (101,6) (19,81) (63,5) (2,7) ER N25 (84,8) (148,3) (143,0) (101,6) (24,38) (63,5) (2,7) 1-1/ ER N32 (93,0) (149,9) (143,0) (101,6) (29,21) (6,3) (3,2) 1-1/ ER N40 (104,9) (186,9) (174,8) (108,0) (35,56) (76,2) (4,5) ER N50 (121,9) (196,1) (174,8) (108,0) (45,72) (76,2) (5,4) 2-1/ ER N65 (154,9) (303,5) (177,8) (177,8) (56,39) (101,6) (10,4) ER N80 (174,8) (313,2) (177,8) (177,8) (67,56) (101,6) (12,2) ER N100 (204,2) (269,2) (177,8) (177,8) (82,80) (101,6) (13,6) 1 2 Manual over-ride handwheel provided only on actuators ER Includes 2.00 high bracket Note: ctuators sized for 80 psi actuator air supply pressure maximum valve differential pressure, and PTFE seats -8-

9 667FTTS Full Port Brass Ball Valve Safety Vent Pressure-Temperature Chart 200 1/4, 3/8, 1/ FTTS Brass ball valve Full port in sizes 1/4 through 1 Safety vented ball for compressed air service Pressure rating 200 psi wog Blow-out proof stem Chrome-plated brass ball PTFE seats, seals and thrust washer Locking handle Pressure, PSI /4, Temperature, F Material Specifications 10 7 Use 9/32 lock only N CH H Lockable only in the closed position Part No. Part Name Material No. 1 Body *Brass CuZn40Pb2 1 2 Seat PTFE 2 3 Ball *Brass CuZn40Pb2 Cr. Plated 1 4 End Cap *Brass CuZn40Pb2 1 5 Stem *Brass CuZn39Pb3 1 6 Nut with Washer *Brass CuZn39Pb3 1 7 acrotized Nut Steel, STM M1010 acrotized 1 8 Packing PTFE 1 9 Thrust Washer PTFE carbon filled 1 10 Handle Steel, Plated 1 *UNI EN CW617N (58Cu-40Zn-2Pb) equivalent to Hot Forging Brass UNS C37700 (60Cu-39Zn-2Pb). **UNI EN12164 CW614N (58Cu-39Zn-3Pb) equivalent to rchitectural Brass bar UNS C38500 (57Cu-40Zn-3Pb) Size N I L G H CH N Cv (Kv) 1/ N8 (8) (12) (45) (22) (95) (47) (20) (5) 3/ N10 (10) (12) (45) (22) (95) (47) (20) (8) 1/ N15 (15) (15) (59) (29) (95) (51) (25) (39) 3/ N20 (20) (17) (64) (32) (116) (59) (31) (56) N25 (25) (21) (81) (40) (116) (63) (40) (78) -9- I L N I G Closed position UNF Lbs (Kgs) 0.4 (0,2) 0.3 (0,1) 0.5 (0,2) 0.8 (0,4) 1.4 (0,6)

10 667FTTS Full Port Brass Ball Valve Safety Vent Valve Open Valve Closed Flow ownstream air exhaust flow Flow Blocked No Leak Pressure Vent The vented ball allows downstream pressure to bleed off the line through the valve body, with the valve remaining tight and the upstream seat continuing to hold line pressure. Valve is lockable in the closed position only according to Par safety OSH (US) requirements. Other Marwin Brass Ball Valves Two Piece 633FTRS-L Full Port CWP Brass 2-Piece Ball Valve, Brass Body / 316SS Trim, RPTFE Seats, Threaded Ends, Lever Operated with Locking evice, Sizes 1/2 2 (Consult Factory) 633FTRS-M Full Port CWP Brass 2-Piece Ball Valve, Brass Body / 316SS Trim, RPTFE Seats, Threaded Ends, irect Mount, Sizes 1/2-2 (Consult Factory) Three Piece 4633RTTS Standard Port CWP Brass 3-Piece Swing-out Ball Valve, Brass Body / 316SS Trim, Threaded Ends, Sizes 1/4-2 (See Bulletin) 4633FTTS Full Port CWP Brass 3-Piece Swing-out Ball Valve, Brass Body / 316SS Trim, Threaded Ends, Sizes 1/4-2 (See Bulletin) 4666RTTS Standard Port CWP Brass 3-Piece Swing-out Ball Valve, Brass Body and Trim, Threaded Ends, Sizes 1-1/4-2 (See Bulletin) 4666FTTS Full Port CWP Brass 3-Piece Swing-out Ball Valve, Brass Body and Trim, Threaded Ends, Sizes 1/4-2 (See Bulletin) Three Way 3T3100FTTS Full Port 300 CWP Brass 3-Way Bottom Entry Ball Valve, T-Port Transflow Mixing, Threaded Ends, Lever Operated, Sizes 1/4-3 (See Bulletin) 3L3200FTTS Full Port 300 CWP Brass 3-Way Bottom Entry Ball Valve, L-Port Non-Transport iverting, Threaded Ends, Lever Operated Sizes 1/4-3 (See Bulletin) 3T3300RTTS Standard Port 400 CWP Brass 3-Way Side Entry Ball Valve, T-Port, Lever Operated, ISO Mounting Pad, Threaded Ends, Sizes 1/4-2 (See Bulletin) 3L3400RTTS Standard Port 400 CWP Brass 3-Way Side Entry Ball Valve, L-Port, Lever Operated, ISO Mounting Pad, Threaded Ends, Sizes 1/4-2 (See Bulletin) -10-

11 Series Ordering Schematic Series Body Ball Stem Port Packing Seats Ends Size Feature 633FTRS-100-L F T R S L 633FTRS-100-M F T R S M 666RTTS R T T S 666FTTS F T T S 666FTTW F T T W 666FTTS-100-M F T T S M 667FTTS F T T S 1 Body 6 Brass 2 Ball 3 Stainless Steel 6 Brass 3 Stem 3 Stainless Steel 6 Brass 7 Brass with Safety Vent 4 Port F Full Port R Standard Port 5 Packing T PTFE 6 Seats R RPTFE T PTFE 7 Ends S FNPT W Solder 8 *Size 025 1/ / / / / / / * Check size availability on bulletin page 9 Feature M irect Mount L Locking evice -11-

12 /1207/5K/B Marwin Valve, a division of Richards Industries 3170 Wasson Road Cincinnati, OH (fax) marwin@richardsind.com Marwin Valve reserves the right to make revisions to its products, specifications, literature and related information without notice. Please visit our website at for the latest information on our products.