METERING PROFILE GAS WATER & ASSOCIATED CONTROLS

Transcription

1 ABN METERING PROFILE GAS WATER & ASSOCIATED CONTROLS Accutherm International is a specialist company supplying high quality gas control products, engineering services and support to all sectors of the gas market. Head Office (Melbourne) Sydney Brisbane (Distributor) 1/5 Samantha Court 2/14 Welder Road 17 Medway Street Knoxfield VIC 3180 Seven Hills NSW 2147 Rocklea QLD 4106 T: T: T: F: F: F: sales@accutherm.com.au sales@gascomponents.com.au

2 Rotary Gas Meters Turbine Gas Meters Diaphragm Gas Meters Turbine Gas Meters GAS Electronic Volume Correctors Dataloggers & Communication Hot & Cold Water Meters WATER Gas Control Equipment Regulators Filters Slam Shut & Relief Valves

3 FMG FLOW METER GROUP FMG specialises in the development and manufacture of energy and gas measurement systems. Located in the Netherlands, FMG produces a wide range of rotary and turbine gas meters, volume conversion devices, master meters and calibration benches. Unique product features include self-diagnosis and tamper prevention. Their wide range includes models from 25 m3/h up to 6500 m3/h flow rates. Pressures ratings range from atmospheric, up to 100 bar. All FMG meters comply with international safety and metrological standards. FMG FMR ROTARY GAS METER The FMR series of rotary gas meters are designed to meet the highest demands of reliable and accurate measurement of gas flow. There compact exchangeable aluminum cartridge allows local repair and on-site cleaning. Installation stresses caused by connecting piping are minimal due to the robust design and construction of the casing and cartridge. Range from 0.5 to 650 m³/h Connection sizes: DN40 to DN150 Connection type: BSP threaded, PN16, ANSI150 and ANSI600 flanged Maximum operating pressure: up to 30 Bar Low frequency pulse output standard High frequency pulse output optional FMG FMT-L TURBINE METER The FMT-L series turbine meters are designed to perform on the highest level of accuracy. The 3 x DN aluminum cartridge with integrated straightening vanes guarantees a high level of accuracy, even under sever flow conditions. The cartridge can be pre-calibrated, under both low and high pressure conditions then exchanged on-site. Range from 8 to 6,500m³/h Connection sizes: DN80 to DN300 Connection type: PN16,25,40,64,100, ANSI150,300,600 Low frequency pulse output standard High frequency pulse output optional

4 GA SERIES DIAPHRAGM GAS METERS GA Series diaphragm gas meters are suitable for cost effective sub metering domestic, commercial and industrial applications. Available with pulse output capable of linking with most data loggers or management systems. Standard sizes fit common connections Made of steel which is polyester powder plastic coated ideally suitable for outdoor applications Measures flow mediums of natural gas, LPG and air. Can be supplied with or without pulse output. Cost effective Each meter is fully tested for accuracy Simple connection to pressure regulators(also available from Accutherm) The performance and parameters comply with the following Standards: AS (Domestic diaphragm gas meters) EN (Gas meters. Diaphragm gas meters) Data sheets available on request. Model: Minimum Flow: m³/hr Nominal Flow: m³/hr Maximum Flow: m³/hr G G G G G G

5 GWF RADIAL BLADE TURBINE METERS GAS GWF srl manufacturer s high quality gas measurement equipment and is the daughter company to the renowned Swiss meter manufacturer GWF AG Luzern. High quality Standard range includes models from 25 to 650 m³/hr Connection sizes of DN50, DN80 and DN100 PN16 flange connection Rated to 6 Bar Low frequency pulse output standard High frequency optional ELGAS SRO Elgas sro specialises in the development, manufacture and supply of data collection equipment in the gas and energy industry. They have smart metering solutions such as volume converters, dataloggers and other communication systems. Elgas minielcor Electronic Volume Corrector The minielcor is battery powered EVC, it is suitable for hazardous areas applications as the device is available with an optional external intrinsically safe power supply. The system uses secure sealed switches to prevent unauthorised configuration changes and obtaining unauthorised data from the device. It comes equipped with a six button keyboard and backlit graphic LCD display. Users can easily check instant values, device parameters or archives.

6 ELGAS SRO Cont. One channel Electronic Volume Converter (EVC) Designed to be used for installation in hazardous area Zones 0, 1 and 2 Battery lifetime more than 5 years Fully configurable device (Telves PC Software included) Graphical backlit LCD display 128 x 64 pixels Possibility to connect 3rd pressure or temperature sensor Possibility to connect second EVC as subsystem Typical error under reference conditions < 0.15 % from measured value (<0.5 % - MID) Certificate FTZU 08 ATEX 0324X Protection class IP 66 Working temperature -25 C to +70 C Communication: Serial interface: RS232 / RS485, Optical interface: IEC Four digital inputs/outputs Optional Accessories: Infrared USB Head HIE-04 Current Output Module CL-1 (4-20 ma) 240V External Power Supply GWF WATER METERS WATER GWF MessSysteme AG is the market leader in Switzerland and proven measuring instrument manufacturer. GWF has developed modern data technology and innovative measuring systems. GWF have been setting standards in measuring data acquisition. Their high-precision measuring instruments are combined with developed and globally installed GWFcoder technology, in addition to advanced and reliable ICT. They guarantee intelligent smart metering system solutions with enhancing energy efficiency

7 GWF WATER METERS Cont. UNICO Single Jet Water Meter WATER GWF UNICO Single Jet water meter is suitable for cold water application up to 30 C, warm water applications up to 90 and hot water applications up to 120 C. The UNICO Meter is available in DN15 and DN20. It is suitable for measurement of low flow rates up to 2.5 m 3 /hr nominal flow rate. It is a robust design with high grade wear resistant materials and has an excellent measuring stability and reliability. Single jet dry-dial meter with magnetic coupling Register can be turned for best readout position Maximum operating pressure PN 16 bar Maximum operating temperature: 30 C, 90 C, 120 C Horizontal or vertical installation 5 dial resolution High grade wear resistant and corrosion proof materials Inlet strainer Reconditionable and recyclable execution Conformity to EEC Standard Available with IP14 Pulse Generator. UNICOcoder models with Modbus interface EN /3 MT Multi Jet Water Meter GWF MT Multi Jet water meter range is available in the MTK cold water models, suitable for applications up to 30 C. The MTW warm water models are suitable for applications to 90 C and the MTH hot water models, suitable for applications up to 130 C. Sizes are available in DN15 to DN50 in threaded and flanged models are available in sizes from DN20 to DN50. The horizontal models are suitable for nominal flow rates up to 15 m 3 /h and 10 m 3 /hr nominal flow for vertical models. It is a robust meter with a long service life and high grade wear resistant materials. It has an excellent measuring stability and reliability.

8 GWF WATER METERS Cont. WATER Horizontal or vertical installation (Vertical riser/down pipe) Register can be turned through 360 Maximum operation pressure PN 16 bar (Flanged PN 25 bar) Maximum operating temperature: 30 C, 90 C or 130 C SVGW Certification, Conformity according to EEC Standard Available with IP14 Pulse Generator MT_coder models with Modbus interface EN /3 Woltman Water Meter GWF Woltman water meter range is available in the WPDK cold water meter models are suitable for applications up to 50 C. The WPDH hot water meter models are suitable for applications up to 130 C. Sizes are available in flanged connection from DN50 to DN300. The WPDK cold water meter range is suitable for nominal flow rates up to 1400 m³/hr. The WPDH hot water range is suitable for nominal flow rates up to 600 m³/h. The Woltman range is a robust design with high grade wear resistant materials, it has an excellent measuring stability and reliability. It has a removable measuring insert which is easily replaceable and retrofitted. Universal installation position Straight flow section 3xDN Register can be turned through 355 Maximum operating pressure PN16 bar Maximum operating temperature: 50 C or 130 C SVGW certification Flood proof standard pulser register (IP68) with ports for two Reed-RD-Pulsers and one Opto-OD- Pulser

9 PIETRO FIORENTINI Pietro Fiorentini, have over 60 years experience in the design, manufacture and supply of components, systems and services to the transmission, distribution and domestic gas markets. GOVERNER Regulators Fiorentini Minireg spring-loaded governors are designed and built to comply with UNI EN 88 class A group 2 specifications and can be used for all types of natural gas, LPG or non-corrosive gases. These regulators are widely used in supply lines for mixed and combined burners and in the piped distribution of methane gas and LPG in both industrial and non-industrial applications. Compact models: DN15, DN20, DN25 Low pressure OPSO models: DN20 & DN25 Full capacity models: DN15 to DN100 Spring loaded Self-acting with balanced stem and seat Double safety diaphragm Enables internal use without connecting an external vent pipe Supplied with internal sensing line and inlet/outlet pressure test points Limited venting to atmosphere Easy installation Recyclable Aluminium body Compact lightweight design Inbuilt filter available External test points

10 PIETRO FIORENTINI Cont. FE Series OPSO Regulator The FE series of two stage self-driven spring loaded regulators are widely used in installations using natural gas, LPG and other non-corrosive gases. They are designed for either direct installation to a gas meter or used in general pipeline work. Balanced double stage (2 stage) Includes Over Pressure Shut Off (OPSO) Rated 8.6 Bar Available in: 25m³, 50m³, 75m³ and 100m³ models Self Driven High accuracy High operating reliability Simple installation procedure Limited venting Option to have a double main diaphragm for extra safety Multiple connections to suit most installations External test points Perfect complement for Accutherm meters Inbuilt filter 100 micron Underground models available Model FE25 Model FEX Model: Capacity Outlet Range: mbar Inlet Connection: BSP Outlet Connection: BSP FE25-BP 25 m³ mm 25mm FE25-TR 25 m³ mm 25mm FES-BP 50 m³ mm 25mm FES-TR 50 m³ mm 25mm FEX-BP 75 m³ mm 40mm FEX-MP 75 m³ mm 40mm FEXS-BP 100 m³ mm 40mm FEXS-MP 100 m³ mm 40mm

11 PIETRO FIORENTINI Cont. HP100 First Stage LPG Regulator The HP100 series of spring loaded, diaphragm controlled balanced plug regulators are suitable for medium and high pressures. They are widely used in the distribution of Natural Gas, and LPG where good performance of regulation and fast response to flow rate variations are required. Most commonly used as 1st stage reduction for domestic, commercial and industrial LPG applications. It has a 25mm NPT connections and includes over pressure shut off (OPSO). DIVAL 500 Regulator The Dival 500 series of spring loaded, diaphragm controlled balanced plug regulators are suitable for low, medium, and high pressure. Divals and shut-off device series regulators are supplied with internal sensing lines. Both the regulator and the shut-off device can be set for suitable pressure ranges. DIVAL 600 Regulator The Dival 600 series of direct acting regulators are suitable for low and medium pressure applications controlled by a diaphragm and counter spring. Modular design of this series allows the installation of an incorporated slam shut or device for use as in line monitor on the same body without changing the face-to-face dimension. It has an open top entry design, allowing easy periodical maintenance without removing body from the line. 106 Gas Filter The 106 series of gas filters are designed to filter non-corrosive dry gases at 50 microns. Rated to 10 bar, they are available in BSP threaded models from DN15 to DN50. Flanged models are available in DN50 to DN100 which universal flange suiting ANSI150 and PN16. Model DN150 is 2 Bar rated.

12 ACCU-TEST GAS SAFETY SHUT OFF SYSTEM The ACCU-TEST is an emergency shut off system which is purposely designed to prevent gas being restored to open unsafe downstream piping, appliances and outlets after loss of power or in the case of an emergency. Assembled ready to install Simple Installation Available in 24V AC or DC and 240VAC AGA Approved Gas Valves Key lockable Isolator Can be wired into fire alarm and/or an emergency stop Standard Low Pressure 240V Systems: Acc Part Number: Size: NG LPG MJ/hr m³/h MJ/hr m³/h LS FS 015 ACCU 240V 15mm LS FS 025 ACCU 240V 25mm LS FS 040 ACCU 240V 40mm LS FS 050 ACCU 240V 50mm LS FS 065 ACCU 240V 65mm LS FS 080 ACCU 240V 80mm *Flow rates based on 2 mbar pressure drop For different voltages, sizes or pressures please call S:\SALES & MARKETING\ADVERTISING & MARKETING\ACCUTHERM PROFILES\ACCUTHERM METERING PROFILE MAY 2014.DOC