Modular F.R.L. Units. New. New. Series AC 46% Better visibility and environmental resistance. Energy saving regulator

Size: px
Start display at page:

Download "Modular F.R.L. Units. New. New. Series AC 46% Better visibility and environmental resistance. Energy saving regulator"

Transcription

1 Modular F.R.L. Units New RoHS etter visibility and environmental resistance Double layer design The bowl is covered with a transparent bowl guard! The inside is visible from 36. The bowl is completely protected from the environment. Safety improved Transparent bowl guard Material: Polycarbonate Inner bowl Material: Polycarbonate ody size: 3 or more Energy saving regulator Pressure drop: Max. 5% improvement Set pressure:.5 to.7 MPa.2 to.2 MPa Easy replacement of the element The element and the bowl are in one piece. Replacement can be done in hand. Existing model Replacement in hand! New Reduced reuired maintenance space F4 75 mm Max. 46% reduction For F4-4 mm F4- F, W only (Except F1-, F5-, F6-, W1-) 35 mm reduction New ody size 1, 5, 6 added! R W F L C Size 1 Regulator ir Filter Lubricator Mist Separator Lubricator Mist Separator Filter Regulator Series C Filter Regulator ir Filter Regulator Size 5, 6 CT.EUS4-56D-UK

2 Series C Transparent bowl guard etter environmental resistance: Transparent bowl guard can protect the inner bowl! Transparent bowl guard Pressure Double layer design Inner bowl Transparent bowl guard Existing model Windows on the bowl guard are abolished and the inner bowl is covered with polycarbonate transparent bowl guard. Even when the product is used in an ambient environment where it is exposed to chemicals or oil, which do not stick to the bowl where the internal pressure is applied. This can reduce direct effects on the bowl. Inner bowl owl guard Pressure Cracks may occur in a portion where the internal pressure is applied. ir Filter F Mist Separator FM Micro Mist Separator FD pplicable model Filter Regulator W Lubricator L ody size: 3 or more etter visibility: 36 Use of transparent bowl guard makes it possible to check the condensate inside the filter case and the remaining oil amount in the lubricator from the entire periphery. Light weight: Max. 9 g reduction Except W Metal related corrosion does not occur. Existing model: W W- Weight 36 g F4- F4 Weight 45 g F4- F4 Condensate can be monitored from anywhere. Resin body does not rust. Regulator/R Filter Regulator/W Pressure drop: Max. 5% improvement Outlet pressure (MPa).3 New R2-2- New R2-2- R W R2-2 New Spacer Modular connection Step Mount the product by lining up the mating surface of the new spacer with bracket. Insert the retainer into the spacer bolt and tighten the nut. (temporary assembling) Spacer with bracket Tentative tightening by fingers is possible. Retainer R2-2 Step Nut Tighten the nut with the hexagon wrench. Conditions 5 Flow rate L/min(NR) Inlet pressure:.5 MPa Outlet pressure:.3 MPa Flow rate: 5 L/min(NR) Interchangeable with existing model New spacer can be connected to existing F, R, L, W series. Existing spacer cannot be used for new R -, W- series. 1

3 Modular F.R.L. Units Series C Series Configuration Product Model Port size M5 1/8 1/4 3/8 1/2 3/4 1 INDEX C ir Filter Regulator Lubricator F R L C1- C2- C25- C3- P.7 F RL C4- C4-6- W L Filter Regulator W Lubricator L C1- C2- C3- C4- C4-6- P.13 FR F FM R W FM F ttachment FM / FD L W R ir Combination ir Filter F Regulator R ir Filter Mist Separator Regulator F FM R C1- C2- C25- C3- C4- C4-6- C2C- C25C- C3C- C4C- C4C-6- P.17 P.21 Filter Regulator W Mist Separator FM C2D- C3D- C4D- P.25 C4D-6-2

4 Series C Series Configuration Product Model Port size M5 1/8 1/4 3/8 1/2 3/4 1 INDEX F F1- F2- ir Filter F3- F4- F4-6- P.34 F5- F6- FM FM2- Mist Separator FM3- FM4- FM4-6- P.34 FD FD2- Micro Mist Separator FD3- FD4- FD4-6- P.34 R R1- R2- Regulator R25- R3- R4- P.54 R4-6- 3

5 Modular F.R.L. Units Series C Product Model Port size M5 1/8 1/4 3/8 1/2 3/4 1 INDEX C Lubricator L L1- L2- L3- L4- L4-6- L5- P.64 W L F RL W L6- W1- FR Filter Regulator W2- W3- W4- W4-6- P.72 W FM F FM R F ttachment Simple Specials System system designed to respond uickly and easily to your special ordering needs Short lead times This system enables us to respond to your special needs, such as additional machining, accessory assembly, or modular unit, and deliver such special products as uickly as standard products. W L R FM / FD Repeat orders Once we receive a Simple Special part number from your previous order, we will process the order, manufacture the product, and deliver it to you. 4

6 Series C ttachment List Check valve Page 28 Pressure switch Page 29 check valve with intermediate branch port can be easily installed to prevent a backfl ow of lubricant when branching the air fl ow and releasing the air on the outlet side of the regulator. Check valve compact integrated pressure switch can be easily installed and facilitates the pressure detection of the line. Pressure switch pplicable series ir Filter Regulator Lubricator (C2- to C4-) Filter Regulator Lubricator (C2- to C4-) Port size: Except 6 pplicable series ir Filter Regulator Lubricator (C2- to C4-) Filter Regulator Lubricator (C2- to C4-) ir Filter Regulator (C2- to C4-) ir Filter Mist Separator Regulator (C2C- to C4C-) Filter Regulator Mist Separator (C2D- to C4D-) T-spacer Page 29 Pressure relief 3 port valve Page 3 Using a T-shaped spacer facilitates the branching of air fl ow. T-spacer With the use of a pressure relief 3 port valve, pressure left in the line can be easily exhausted. Pressure relief 3 port valve pplicable series ir Filter Regulator Lubricator (C1- to C4-) ir Filter Regulator (C1- to C4-) ir Filter Mist Separator Regulator (C2C- to C4C-) pplicable series ir Filter Regulator Lubricator (C2- to C4-) Filter Regulator Lubricator (C2- to C4-) ir Filter Regulator (C2- to C4-) ir Filter Mist Separator Regulator (C2C- to C4C-) Filter Regulator Mist Separator (C2D- to C4D-) Cross spacer Page 3 Piping adapter Page 31 Pipings are possible in all 4 directions. piping adapter allows installation/removal of the component without removing the piping and thus makes maintenance easier. Cross spacer Piping adapter Needs to be ordered separately. Needs to be ordered separately. 5

7 Modular F.R.L. Units Series C Pressure switch with piping adapter Page 31 ccessories (Spacer/Spacer with bracket) Page 32 C Spacer with bracket Spacer F RL Pressure switch with piping adapter Spacer with bracket W W L F FM R W FM F ttachment FM / FD L R FR Needs to be ordered separately. Related Product Modular adapter Easy modular connections for all euipment! Example) ir fi lter 3 port valve Needs to be ordered separately. Uni 1/8 to 1/2 Hexagon socket 3 port valve Modular adapter (E31-U2) Spacer with bracket (Y3T-) ir filter (F3-) 6

8 ir Combination ir Filter Regulator Lubricator C1- to C4- Symbol 1 2 L How to Order C 3 w 3 e DG r t y Option/Semi-standard: Select one each for a to m. Option/ttachment/Semi-standard symbol: When more than one specification is reuired, indicate in alphanumeric order. Example) C3-F3DM-KSTV-13NR- w e r t y Note 3) Option ttachment Semi-standard Pipe thread type a b c d e f g Port size Float type auto drain Pressure Note 6) gauge Check valve Pressure switch T-spacer Pressure relief 3 port valve Symbol Description ody size Metric thread (M5) Rc N Note 1) NPT F Note 2) G M5 M5 1 1/8 2 1/4 3 3/8 4 1/2 6 3/4 Without auto drain C Note 4) N.C. (Normally closed) Drain port is closed when pressure is not applied. D Note 5) N.O. (Normally open) Drain port is open when pressure is not applied. Without pressure gauge G Round type pressure gauge (without limit indicator) Round type pressure gauge (with limit indicator) M Round type pressure gauge (with colour zone) Without attachment K Mounting position: FRKL Note 7) Without attachment S Note 8) Mounting position: FRSL Without attachment T Note 8) Mounting position: FTRL Without attachment V Mounting position: FRLV Set.5 to.7 MPa setting pressure Note 9) 1.2 to.2 MPa setting Note 1) h owl Polycarbonate bowl 2 Metal bowl 6 Nylon bowl 8 Metal bowl with level gauge C With bowl guard Note 11) Note 11) Note 11) 6C With bowl guard (Nylon bowl) Note 12) Note 12) Note 12) 7

9 ir Combination Series C1- to C4- F RL C y Semi-standard i j k l m Symbol Description ody size With drain cock ir filter Drain guide 1/8 drain port Note 13) J Note 14) Drain guide 1/4 W Note 15) Drain cock with barb fitting (for ø6 x ø4 nylon tube) Lubricator lubricant exhaust port Exhaust mechanism Flow direction Pressure unit Note 1) Drain guide is NPT1/8 (applicable to the C2-) and NPT1/4 (applicable to the C25- to C4-). The auto drain port comes with ø3/8" One-touch fi tting (applicable to the C25- to C4-). Note 2) Drain guide is G1/8 (applicable to the C2-) and G1/4 (applicable to the C25- to C4-). Note 3) Option G, M are not assembled and supplied loose at the time of shipment. Note 4) When pressure is not applied, condensate which does not start the auto drain mechanism will be left in the bowl. Releasing the residual condensate before ending operations for the day is recommended. Note 5) If the compressor is small (.75 kw, discharge fl ow is less than 1 L/min[NR]), air leakage from the drain cock may occur during start Standard Specifications C1- C2- C4- Without drain cock 3 Note 16) Lubricator with drain cock Relieving type N Non-relieving type Flow direction: Left to right R Flow direction: Right to left Name plate and pressure gauge in imperial units: MPa Z Note 17) Name plate, caution plate for bowl, and pressure gauge in imperial units: psi, F Note 18) Note 18) Note 18) Note 18) Note 18) of operations. N.C. type is recommended. Note 6) When the pressure gauge is attached, a 1. MPa pressure gauge will be fi tted for standard (.7 MPa) type..4 MPa pressure gauge for.2 MPa type (1. MPa pressure gauge only for the C1-). Note 7) Not available with piping port size: 6 Note 8) The bracket position varies depending on the T-spacer or pressure switch mounting. Note 9) Pressure can be set higher than the specifi cation pressure in some cases, but use pressure within the specifi cation range. Note 1) Refer to Chemical data on page 38 for chemical resistance of the bowl. Note 11) bowl guard is provided as standard euipment (polycarbonate). W L R FM / FD F ttachment W FM F FM R FR W L Note 12) bowl guard is provided as standard euipment (nylon). Note 13) Float type auto drain: The combination of C and D is not possible. Note 14) Without a valve function Note 15) The combination of metal bowl: 2 and 8 is not available. Note 16) When choosing with W: Filter drain port, the drain cock of a lubricator will be with barb fi ttings. Note 17) For pipe thread type: M5, NPT. MPa and psi are shown together on the pressure unit. Cannot be used with M: Round pressure gauge (with colour zone). vailable by reuest for special. Note 18) : For pipe thread type: M5, NPT only Model C1- C2- C25- C3- C4- C4-6- ir Filter [F] F1- F2- F3- F3- F4- F4-6- Component Regulator [R] R1- R2- R25- R3- R4- R4-6- Lubricator [L] L1- L2- L3- L3- L4- L4-6- Port size M5 x.8 1/8, 1/4 1/4, 3/8 1/4, 3/8 1/4, 3/8, 1/2 3/4 Pressure gauge port size [R] 1/16 1/8 Fluid ir mbient and fluid temperature 5 to 6 C (with no freezing) Proof pressure 1.5 MPa Max. operating pressure 1. MPa Set pressure range [R].5 to.7 MPa Nominal filtration rating [F] 5 μm Recommended lubricant [L] Class 1 turbine oil (ISO VG32) owl material [F/L] Polycarbonate owl guard [F/L] Semi-standard (Steel) Standard (Polycarbonate) Construction [R] Relieving type Weight [kg]

10 Series C1- to C4- Flow-rate Characteristics (Representative values) Condition: Inlet pressure.7 MPa C1- M5 x.8 C2- Rc1/4 C25- Rc3/ Outlet pressure [MPa] Outlet pressure [MPa] Outlet pressure [MPa] Flow rate L/min (NR) Flow rate L/min (NR) Flow rate L/min (NR) C3- Rc3/8 C4- Rc1/2 C4-6- Rc3/ Outlet pressure [MPa] Outlet pressure [MPa] Outlet pressure [MPa] Flow rate L/min (NR) Flow rate L/min (NR) Flow rate L/min (NR) Pressure Characteristics (Representative values) Conditions: Inlet pressure.7 MPa, Outlet pressure.2 MPa, Flow rate 2 L/min (NR) C1-.3 C2-.3 C25-.3 Outlet pressure [MPa] Set point Outlet pressure [MPa] Set point Outlet pressure [MPa] Set point Inlet pressure [MPa] Inlet pressure [MPa] Inlet pressure [MPa] C3-.3 C4- /C Outlet pressure [MPa] Set point Outlet pressure [MPa] Set point Inlet pressure [MPa] Inlet pressure [MPa] 9

11 ir Combination Series C1- to C4- Lock button Specific Product Precautions e sure to read this before handling. Refer to the back cover for Safety Instructions, Handling Precautions for SMC Products and the Operation Manual for F.R.L. Precautions, Warning Piping 1. When mounting a check valve, make sure the arrow (IN side) points in the correct direction of air fl ow. Caution ir Supply 1. Use an air fi lter with 5 μm or less fi ltration rating on the inlet side of the valve to avoid any damage to the seat caused by dust when mounting a pressure relief 3 port valve on the inlet side. Caution Mounting/djustment 1. When the bowl is installed on the air fi lter, fi lter regulator, lubricator, mist separator, or micro mist separator (C25- to C4-), install them so that the lock button lines up to the groove of the front (or the back) of the body to avoid drop or damage of the bowl. Warning Selection 1. Float type auto drain Operate under the following conditions to avoid malfunction. <N.O. type> Operating compressor:.75 kw (1 L/min (NR)) or more. When using 2 or more auto drains, multiply the value above by the number of auto drains to fi nd the capacity of the compressors you will need. For example, when using 2 auto drains, 1.5 kw (2 L/min (NR)) of the compressor capacity is reuired. Operating pressure:.1 MPa or more <N.C. type> Operating pressure for D27-:.1 MPa or more Operating pressure for D37-/D47-:.15 MPa or more 2. When a pressure release 3 port valve is mounted on the inlet side of the regulator or fi lter regulator, the residual pressure can be released to the inlet side. However, if the set pressure is.15 MPa or less, the residual pressure may not be released. When using the pressure release 3 port valve at a set pressure level of.15 MPa or less, it is recommended to use a regulator with backfl ow function. Caution 1. When releasing air at the intermediate position using a T-spacer on the inlet side of the lubricator, lubricant may back fl ow. Therefore, releasing air that does not contain traces of lubricant is not possible. To release air that does not contain traces of lubricant, use a check valve (Series KM) on the inlet side of the lubricator to prevent a backfl ow of the lubricant. 2. If a pressure relief 3 port valve is mounted on the inlet side of the lubricator, causing a backfl ow of air, it can result in a backflow of oil or damage to internal parts. Do not use it in this fashion. 3. n F.R.L. unit shipped from the plant has its model number labeled. However, components that are combined together during the distribution process do not have a label on them. R FM / FD F ttachment W FM F FM R FR W L F RL C W L 1

12 Series C1- to C4- Dimensions C1-/C2- C25- to C4-6- Pressure gauge (Option) J J M F N S Pressure gauge (Option) J J M F R N S H Q1 V IN OUT C H Q1 V IN OUT C 2 x P1 (Port size) Q1 Q2 2 x P1 (Port size) pplicable model C1-/C2- C2- C25- to C4-6- Optional/Semi-standard With auto drain (N.C.) Metal bowl With drain guide Metal bowl with drain guide With auto drain (N.O./N.C.) specifications N.O.: lack N.C.: Grey Dimensions M5 x.8 Width across flats 14 1/8 Width across flats 14 1/8 Thread type/rc, G: ø1 One-touch fitting Thread type/npt: ø3/8" One-touch fitting pplicable model C25- to C4-6- Optional/Semi-standard specifications Metal bowl Metal bowl with drain guide Metal bowl with level gauge Metal bowl with level gauge, with drain guide With drain guide Drain cock with barb fitting Q1 U R U G Clearance for maintenance Drain P2 (Pressure gauge port size) E G Clearance for maintenance Drain P2 (Pressure gauge port size) Dimensions Width across flats 17 1/4 Width across Width across flats 17 1/4 flats 17 1/4 arb fitting applicable tubing: T64 Standard specifications Model racket mount P1 P2 C E F G J M N Q1 Q2 R S U V C1- M5 x.8 1/ C2-1/8, 1/4 1/ C25-1/4, 3/8 1/ C3-1/4, 3/8 1/ C4-1/4, 3/8, 1/2 1/ C4-6- 3/4 1/ Model Round type pressure gauge Optional specifications Round type pressure gauge (with colour zone) With auto drain With barb fitting Semi-standard specifications With drain guide Metal bowl Metal bowl with drain guide Metal bowl with level gauge Metal bowl with level gauge, with drain guide H J H J C1- ø C2- ø ø C25- ø ø C3- ø ø C4- ø ø C4-6- ø ø

13 W L R FM / FD F ttachment W FM F FM R FR W L F R L C 12

14 ir Combination Filter Regulator Lubricator C1- to C4- Symbol 1 2 L How to Order C 3 3 DG w e r t y Option/Semi-standard: Select one each for a to l. Option/ttachment/Semi-standard symbol: When more than one specification is reuired, indicate in alphanumeric order. Example) C3-F3DM-KSV-13NR- w e r t y 13 Note 3) Option ttachment Semi-standard Pipe thread type a b c d e f Port size Float type auto drain Pressure Note 6) gauge Check valve Pressure switch Pressure relief 3 port valve Symbol Description ody size Metric thread (M5) Rc N Note 1) NPT F Note 2) G M5 M5 1 1/8 2 1/4 3 3/8 4 1/2 6 3/4 Without auto drain C Note 4) N.C. (Normally closed) Drain port is closed when pressure is not applied. D Note 5) N.O. (Normally open) Drain port is open when pressure is not applied. Without pressure gauge G Round type pressure gauge (without limit indicator) Round type pressure gauge (with limit indicator) M Round type pressure gauge (with colour zone) Without attachment K Mounting position: WKL Note 7) Without attachment S Note 8) Mounting position: WSL Without attachment V Mounting position: WLV Set.5 to.7 MPa setting pressure Note 9) 1.2 to.2 MPa setting Note 1) g owl h Note 13) Filter regulator drain port Polycarbonate bowl 2 Metal bowl 6 Nylon bowl 8 Metal bowl with level gauge C With bowl guard Note 11) Note 11) 6C With bowl guard (Nylon bowl) Note 12) Note 12) With drain cock Drain guide 1/8 J Note 14) Drain guide 1/4 W Note 15) Drain cock with barb fi tting (for ø6 x ø4 nylon tube)

15 ir Combination Series C1- to C4- C y Semi-standard i j k l Component Lubricator lubricant exhaust port Exhaust mechanism Flow direction Pressure unit Symbol Note 1) Drain guide is NPT1/8 (applicable to the C2-) and NPT1/4 (applicable to the C3- to C4-). The auto drain port comes with ø3/8" One-touch fitting (applicable to the C3- to C4-). Note 2) Drain guide is G1/8 (applicable to the C2-) and G1/4 (applicable to the C3- to C4-). Note 3) Option G, M are not assembled and supplied loose at the time of shipment. Note 4) When pressure is not applied, condensate which does not start the auto drain mechanism will be left in the bowl. Releasing the residual condensate before ending operations for the day is recommended. Note 5) If the compressor is small (.75 kw, discharge fl ow is less than 1 L/min[NR]), air leakage from the drain cock may occur during start of operations. N.C. type is Standard Specifications Description ody size Without drain cock 3 Note 16) Lubricator with drain cock Relieving type N Non-relieving type Flow direction: Left to right R Flow direction: Right to left Name plate and pressure gauge in imperial units: MPa Z Note 17) Name plate, caution plate for bowl, and pressure gauge in imperial units: psi, F Note 18) Note 18) Note 18) Note 18) recommended. Note 6) When the pressure gauge is attached, a 1. MPa pressure gauge will be fitted for standard (.7 MPa) type..4 MPa pressure gauge for.2 MPa type (1. MPa pressure gauge only for the C1-). Note 7) Not available with piping port size: 6 Note 8) The bracket position varies depending on the pressure switch mounting. Note 9) Pressure can be set higher than the specification pressure in some cases, but use pressure within the specification range. Note 1) Refer to Chemical data on page 38 for chemical resistance of the bowl. Note 11) bowl guard is provided as standard euipment (polycarbonate). C1- C2- C4- Note 12) bowl guard is provided as standard euipment (nylon). Note 13) Float type auto drain: The combination of C and D is not possible. Note 14) Without a valve function Note 15) The combination of metal bowl: 2 and 8 is not available. Note 16) When choosing with W: Filter regulator drain port, the drain cock of a lubricator will be with barb fitting. Note 17) For pipe thread type: M5, NPT. MPa and psi are shown together on the pressure unit. Cannot be used with M: Round pressure gauge (with colour zone). vailable by reuest for special. Note 18) : For pipe thread type: M5, NPT only Model C1- C2- C3- C4- C4-6- Filter Regulator [W] W1- W2- W3- W4- W4-6- Lubricator [L] L1- L2- L3- L4- L4-6- Port size M5 x.8 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2 3/4 Pressure gauge port size [W] 1/16 1/8 Fluid ir mbient and fluid temperature 5 to 6 C (with no freezing) Proof pressure 1.5 MPa Maximum operating pressure 1. MPa Set pressure range [W].5 to.7 MPa Nominal filtration rating [W] 5 μm Recommended lubricant [L] Class 1 turbine oil (ISO VG32) owl material [W/L] Polycarbonate owl guard [W/L] Semi-standard (Steel) Standard (Polycarbonate) Construction [W] Relieving type Weight [kg] W L R FM / FD F ttachment W FM F FM R FR W L F RL

16 Series C1- to C4- Dimensions C1-/C2- Pressure gauge (Option) J J M F S C3- to C4-6- J J M F S Pressure gauge (Option) R H Q1 V U U G Clearance for maintenance G Clearance for maintenance Q1 2 x P1 (Port size) Q1 Q2 C Q1 V C H R IN OUT IN OUT 2 x P1 (Port size) Drain P2 (Pressure gauge port size) E Drain P2 (Pressure gauge port size) pplicable model C1-/C2- C2- C3- to C4-6- Optional/Semi-standard specifications With auto drain (N.C.) Metal bowl With drain guide Metal bowl with drain guide With auto drain (N.O./N.C.) Dimensions M5 x.8 Width across flats 14 1/8 Width across flats 14 1/8 N.O.: lack N.C.: Grey Thread type/rc, G: ø1 One-touch fitting Thread type/npt: ø3/8" One-touch fitting pplicable model C3- to C4-6- Optional/Semi-standard specifications Metal bowl Metal bowl with drain guide Metal bowl with level gauge Metal bowl with level gauge, with drain guide With drain guide Drain cock with barb fitting Dimensions Width across flats 17 1/4 Width across Width across flats 17 1/4 flats 17 1/4 arb fitting applicable tubing: T64 Model Round type pressure gauge Optional specifications Round type pressure gauge (with colour zone) With auto drain With barb fitting Standard specifications Model racket mount P1 P2 C Note) E F G J M Q1 Q2 R S U V C1- M5 x.8 1/ C2-1/8, 1/4 1/ C3-1/4, 3/8 1/ C4-1/4, 3/8, 1/2 1/ C4-6- 3/4 1/ Semi-standard specifications With drain guide Metal bowl Metal bowl with drain guide Metal bowl with level gauge Metal bowl with level gauge, with drain guide H J H J C1- ø C2- ø ø C3- ø ø C4- ø ø C4-6- ø ø Note) The dimension of C is the length when the filter regulator knob is unlocked. 15

17 W L R FM / FD F ttachment W FM F FM R FR W L F R L C 16

18 ir Combination ir Filter Regulator C1- to C4- Symbol 1 2 L How to Order C 3 3 DG w e r t y Option/Semi-standard: Select one each for a to j. Option/ttachment/Semi-standard symbol: When more than one specification is reuired, indicate in alphanumeric order. Example) C3-F3DM-SV-1NR- w e r t y Note 3) Option ttachment Semi-standard Pipe thread type a b c d e Port size Float type auto drain Pressure Note 6) gauge Pressure switch Symbol Description ody size Metric thread (M5) Rc N Note 1) NPT F Note 2) G M5 M5 1 1/8 2 1/4 3 3/8 4 1/2 6 3/4 Without auto drain C Note 4) N.C. (Normally closed) Drain port is closed when pressure is not applied. D Note 5) N.O. (Normally open) Drain port is open when pressure is not applied. Without pressure gauge G Round type pressure gauge (without limit indicator) Round type pressure gauge (with limit indicator) M Round type pressure gauge (with colour zone) Without attachment S Note 7) Mounting position: FSR T-spacer T Note 7) Mounting position: FTR Without attachment Pressure relief V Mounting position: FRV 3 port valve V1 Note 8) Mounting position: VFR Set.5 to.7 MPa setting pressure Note 9) 1.2 to.2 MPa setting Note 1) f owl g Note 13) ir fi lter drain port Polycarbonate bowl 2 Metal bowl 6 Nylon bowl 8 Metal bowl with level gauge C With bowl guard Note 11) Note 11) Note 11) 6C With bowl guard (Nylon bowl) Note 12) Note 12) Note 12) With drain cock Drain guide 1/8 J Note 14) Drain guide 1/4 W Note 15) Drain cock with barb fi tting (for ø6 x ø4 nylon tube) 17

19 ir Combination Series C1- to C4- F RL C y Semi-standard h i j Exhaust mechanism Flow direction Pressure unit Note 1) Drain guide is NPT1/8 (applicable to the C2-) and NPT1/4 (applicable to the C25- to C4-). The auto drain port comes with ø3/8" One-touch fi tting (applicable to the C25- to C4-). Note 2) Drain guide is G1/8 (applicable to the C2-) and G1/4 (applicable to the C25- to C4-). Note 3) Option G, M are not assembled and supplied loose at the time of shipment. Note 4) When pressure is not applied, condensate which does not start the auto drain mechanism will be left in the bowl. Releasing the residual condensate before ending operations for the day is recommended. Note 5) If the compressor is small (.75 kw, discharge flow is less than 1 L/min[NR]), air leakage from the drain cock may occur during start of C1- Symbol Description ody size Relieving type N Non-relieving type Flow direction: Left to right R Flow direction: Right to left Name plate and pressure gauge in imperial units: MPa Z Note 16) Name plate, caution plate for bowl, and pressure gauge in imperial units: psi, F Note 17) Note 17) Note 17) Note 17) Note 17) operations. N.C. type is recommended. Note 6) When the pressure gauge is attached, a 1. MPa pressure gauge will be fi tted for standard (.7 MPa) type..4 MPa pressure gauge for.2 MPa type (1. MPa pressure gauge only for the C1-). Note 7) The bracket position varies depending on the T-spacer or pressure switch mounting. Note 8) Make sure that the outlet pressure is released to atmospheric pressure using a pressure gauge. For V1 specifi cation, use the regulator with a set pressure of.15 MPa or more to ensure the pressure release. Note 9) Pressure can be set higher than the specifi cation pressure in some cases, but use pressure within the specifi cation range. Note 1) Refer to Chemical data on page 38 for chemical resistance of the bowl. C2- C4- Note 11) bowl guard is provided as standard euipment (polycarbonate). Note 12) bowl guard is provided as standard euipment (nylon). Note 13) Float type auto drain: The combination of C and D is not possible. Note 14) Without a valve function Note 15) The combination of metal bowl: 2 and 8 is not available. Note 16) For pipe thread type: M5, NPT. MPa and psi are shown together on the pressure unit. Cannot be used with M: Round pressure gauge (with colour zone). vailable by reuest for special. Note 17) : For pipe thread type: M5, NPT only F ttachment W FM F FM R FR W L Standard Specifications Model C1- C2- C25- C3- C4- C4-6- Component ir Filter [F] F1- F2- F3- F3- F4- F4-6- Regulator [R] R1- R2- R25- R3- R4- R4-6- Port size M5 x.8 1/8, 1/4 1/4, 3/8 1/4, 3/8 1/4, 3/8, 1/2 3/4 Pressure gauge port size [R] 1/16 1/8 Fluid ir mbient and fluid temperature 5 to 6 C (with no freezing) Proof pressure 1.5 MPa Maximum operating pressure 1. MPa Set pressure range [R].5 to.7 MPa Nominal filtration rating [F] 5 μm owl material [F] Polycarbonate owl guard [F] Semi-standard (Steel) Standard (Polycarbonate) Construction [R] Relieving type Weight [kg] W L R FM / FD

20 Series C1- to C4- Dimensions C1-/C2- C25- to C4-6- Pressure gauge (Option) J J M F S P2 (Pressure gauge port size) Pressure gauge (Option) J J M F R S H Q1 pplicable model C1-/C2- C2- C25- to C4-6- Optional/Semi-standard specifications With auto drain (N.C.) Metal bowl With drain guide Metal bowl with drain guide With auto drain (N.O./N.C.) Dimensions M5 x.8 Width across flats 14 1/8 Width across flats 14 1/8 N.O.: lack N.C.: Grey Thread type/rc, G: ø1 One-touch fitting Thread type/npt: ø3/8" One-touch fitting pplicable model C25- to C4-6- Optional/Semi-standard specifications Metal bowl Metal bowl with drain guide Metal bowl with level gauge Metal bowl with level gauge, with drain guide With drain guide Drain cock with barb fitting R 2 x P1 (Port size) V Q1 Q2 U IN OUT C H 2 x P1 (Port size) Q1 Q1 U V IN OUT C G Clearance for maintenance Drain E G Clearance for maintenance Drain P2 (Pressure gauge port size) Dimensions Width across flats 17 1/4 Width across Width across flats 17 1/4 flats 17 1/4 arb fitting applicable tubing: T64 Model Round type pressure gauge Optional specifications Round type pressure gauge (with colour zone) With auto drain With barb fitting Standard specifications Model racket mount P1 P2 C E F G J M Q1 Q2 R S U V C1- M5 x.8 1/ C2-1/8, 1/4 1/ C25-1/4, 3/8 1/ C3-1/4, 3/8 1/ C4-1/4, 3/8, 1/2 1/ C4-6- 3/4 1/ Semi-standard specifications With drain guide Metal bowl Metal bowl with drain guide Metal bowl with level gauge Metal bowl with level gauge, with drain guide H J H J C1- ø C2- ø ø C25- ø ø C3- ø ø C4- ø ø C4-6- ø ø

21 W L R FM / FD F ttachment W FM F FM R FR W L F R L C 2

22 ir Combination ir Filter Mist Separator Regulator C2C- to C4C- Symbol 1 2 L L How to Order C 3 C 3 DG w e r t y Option/Semi-standard: Select one each for a to j. Option/ttachment/Semi-standard symbol: When more than one specification is reuired, indicate in alphanumeric order. Example) C3C-F3DM-SV-1NR- Symbol Description ody size w e r t y Note 1) Option ttachment Semi-standard Pipe thread type a b c d e f g h Port size Float type auto drain Rc N NPT F G 1 1/8 2 1/4 3 3/8 4 1/2 6 3/4 Without auto drain C Note 2) N.C. (Normally closed) Drain port is closed when pressure is not applied. D Note 3) N.O. (Normally open) Drain port is open when pressure is not applied. Without pressure gauge Pressure G gauge Note 4) Round type pressure gauge (with limit indicator) M Round type pressure gauge (with colour zone) Pressure Without attachment switch S Note 5) Mounting position: FFMSR T-spacer T Note 5) Mounting position: FFMTR Pressure relief 3 port valve Without attachment V Mounting position: FFMRV V1 Note 6) Mounting position: VFFMR Set.5 to.7 MPa setting pressure Note 7) 1.2 to.2 MPa setting Polycarbonate bowl 2 Metal bowl owl 6 Nylon bowl 8 Metal bowl with level gauge C With bowl guard 6C With bowl guard (Nylon bowl) Filter Mist separator drain port Exhaust mechanism With drain cock Drain guide 1/8 J Note 8) Drain guide 1/4 W Note 11) Drain cock with barb fi tting (for ø6 x ø4 nylon tube) Relieving type N Non-relieving type 21

23 ir Combination Series C2C- to C4C- F RL C y Semi-standard i j Flow direction Pressure unit Symbol Note 1) Option G, M are not assembled and supplied loose at the time of shipment. Note 2) When pressure is not applied, condensate which does not start the auto drain mechanism will be left in the bowl. Releasing the residual condensate before ending operations for the day is recommended. Note 3) If the compressor is small (.75 kw, discharge fl ow is less than 1 L/min[NR]), air leakage from the drain cock may occur during start of operations. N.C. type is recommended. Standard Specifications Component Description C2C- Note 4) When the pressure gauge is attached, a 1. MPa pressure gauge will be fitted for standard (.7 MPa) type..4 MPa pressure gauge for.2 MPa type. Note 5) The bracket position varies depending on the T-spacer or pressure switch mounting. Note 6) Make sure that the outlet pressure is released to atmospheric pressure using a pressure gauge. For V1 specifi cation, use the regulator with a set pressure of.15 MPa or more to ensure the pressure release. Note 7) Pressure can be set higher than the specifi cation pressure in some cases, but use pressure within the specifi cation range. Note 1) Conditions: Mist separator inlet pressure:.7 MPa; The rated flow varies depending on the inlet pressure. Keep the air fl ow within the rated flow to prevent an outfl ow of lubricant to the outlet side. Note 2) When the compressor oil mist discharge concentration is 3 mg/m 3 (NR). Note 3) owl seal and other O-rings are slightly lubricated. C4C- ody size Flow direction: Left to right R Flow direction: Right to left Name plate and pressure gauge in imperial units: MPa Z Note 9) Name plate, caution plate for bowl, and pressure gauge in imperial units: psi, F Note 1) Note 1) Note 1) Note 1) Note 8) Without a valve function Note 9) For pipe thread type: NPT. MPa and psi are shown together on the pressure unit. Cannot be used with M: Round pressure gauge (with colour zone). vailable by reuest for special. Note 1) : For pipe thread type: NPT only Note 11) The combination of metal bowl: 2 and 8 is not available. Model C2C- C25C- C3C- C4C- C4C-6- ir Filter [F] F2- F3- F3- F4- F4-6- Mist Separator [FM] FM2- FM3- FM3- FM4- FM4-6- Regulator [R] R2- R25- R3- R4- R4-6- Port size 1/8, 1/4 1/4, 3/8 1/4, 3/8 1/4, 3/8, 1/2 3/4 Pressure gauge port size [R] 1/8 Fluid ir mbient and fluid temperature 5 to 6 C (with no freezing) Proof pressure 1.5 MPa Maximum operating pressure 1. MPa Minimum operating pressure.5 MPa Set pressure range [R].5 to.7 MPa Nominal filtration rating [F/FM] F: 5 μm, FM:.3 μm (99.9% fi ltered particle size) Outlet side oil mist concentration [FM] MX 1. mg/m 3 Note 2) Note 3) (NR) (.8 ppm) Rated flow [L/min (NR)] [FM] Note 1) owl material [F/FM] Polycarbonate owl guard [F/FM] Semi-standard (Steel) Standard (Polycarbonate) Construction [R] Relieving type Weight [kg] W L R FM / FD F ttachment W FM F FM R FR W L

24 Series C2C- to C4C- Dimensions C2C- C25C- to C4C-6- Pressure gauge (Option) J J M F N S Pressure gauge (Option) J J M F R N S H Q1 V Q1 Q2 U C H 2 x P1 (Port size) Q1 Q1 U V R 2 x P1 (Port size) IN OUT IN OUT C G Clearance for maintenance Drain Drain P2 (Pressure gauge port size) E G Clearance for maintenance Drain Drain P2 (Pressure gauge port size) pplicable model C2C- C25C- to C4C-6- Optional/Semi-standard specifications With auto drain (N.C.) With drain guide Metal bowl Metal bowl with drain guide With auto drain (N.O./N.C.) N.O.: lack N.C.: Grey Dimensions M5 x.8 Width across flats 14 1/8 Width across flats 14 1/8 Thread type/rc, G: ø1 One-touch fitting Thread type/npt: ø3/8" One-touch fitting pplicable model C25C- to C4C-6- Optional/Semi-standard specifications Metal bowl Metal bowl with drain guide Metal bowl with level gauge Metal bowl with level gauge, with drain guide With drain guide Drain cock with barb fitting Dimensions Width across flats 17 1/4 Width across Width across flats 17 1/4 flats 17 1/4 arb fitting applicable tubing: T64 Model Round type pressure gauge Optional specifications Round type pressure gauge (with colour zone) With auto drain With barb fitting Standard specifications Model racket mount P1 P2 C E F G J M N Q1 Q2 R S U V C2C- 1/8, 1/4 1/ C25C- 1/4, 3/8 1/ C3C- 1/4, 3/8 1/ C4C- 1/4, 3/8, 1/2 1/ C4C-6-3/4 1/ Semi-standard specifications With drain guide Metal bowl Metal bowl with drain guide Metal bowl with level gauge Metal bowl with level gauge, with drain guide H J H J C2C- ø ø C25C- ø ø C3C- ø ø C4C- ø ø C4C-6- ø ø

25 W L R FM / FD F ttachment W FM F FM R FR W L F R L C 24

26 ir Combination Filter Regulator Mist Separator C2D- to C4D- Symbol 1 2 L L How to Order C 3 D 3 DG w e r t y Option/Semi-standard: Select one each for a to j. Option/ttachment/Semi-standard symbol: When more than one specification is reuired, indicate in alphanumeric order. Example) C3D-F3DM-SV-1NR- Symbol Description N ody size Nw Ne Nr Nt Ny 25 Note 1) Option ttachment Semi-standard Pipe thread type a b c d e f g h i Port size Float type auto drain Rc N NPT F G 1 1/8 2 1/4 3 3/8 4 1/2 6 3/4 Without auto drain C Note 2) N.C. (Normally closed) Drain port is closed when pressure is not applied. D Note 3) N.O. (Normally open) Drain port is open when pressure is not applied. Without pressure gauge Pressure G gauge Note 4) Round type pressure gauge (with limit indicator) M Round type pressure gauge (with colour zone) Pressure switch Without attachment S Note 5) Mounting position: WSFM Without attachment Pressure relief V Mounting position: WFMV 3 port valve V1 Note 6) Mounting position: VWFM Set.5 to.7 MPa setting pressure Note 7) 1.2 to.2 MPa setting Polycarbonate bowl 2 Metal bowl owl 6 Nylon bowl 8 Metal bowl with level gauge C With bowl guard 6C With bowl guard (Nylon bowl) Filter regulator Mist separator drain port Exhaust mechanism Flow direction With drain cock Drain guide 1/8 J Note 8) Drain guide 1/4 W Note 11) Drain cock with barb fi tting (for ø6 x ø4 nylon tube) Relieving type N Non-relieving type Flow direction: Left to right R Flow direction: Right to left

27 ir Combination Series C2D- to C4D- F RL C y Semi-standard j Pressure unit Symbol Note 1) Option G, M are not assembled and supplied loose at the time of shipment. Note 2) When pressure is not applied, condensate which does not start the auto drain mechanism will be left in the bowl. Releasing the residual condensate before ending operations for the day is recommended. Note 3) If the compressor is small (.75 kw, discharge fl ow is less than 1 L/min[NR]), air leakage from the drain cock may occur during start of operations. N.C. type is recommended. Description Note 4) When the pressure gauge is attached, a 1. MPa pressure gauge will be fitted for standard (.7 MPa) type..4 MPa pressure gauge for.2 MPa type. Note 5) The bracket position varies depending on the pressure switch mounting. Note 6) Make sure that the outlet pressure is released to atmospheric pressure using a pressure gauge. For V1 specification, use the regulator with a set pressure of.15 MPa or more to ensure the pressure release. C2D- C4D- ody size Name plate and pressure gauge in imperial units: MPa Z Note 9) Name plate, caution plate for bowl, and pressure gauge in imperial units: psi, F Note 1) Note 1) Note 1) Note 7) Pressure can be set higher than the specifi cation pressure in some cases, but use pressure within the specification range. Note 8) Without a valve function Note 9) For pipe thread type: NPT. MPa and psi are shown together on the pressure unit. Cannot be used with M: Round pressure gauge (with colour zone). vailable by reuest for special. Note 1) : For pipe thread type: NPT only Note 11) The combination of metal bowl: 2 and 8 is not available. W FM F FM R FR W L Standard Specifications Model C2D- C3D- C4D- C4D-6- Component Filter Regulator [W] W2- W3- W4- W4-6- Mist Separator [FM] FM2- FM3- FM4- FM4-6- Port size 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2 3/4 Pressure gauge port size [W] 1/8 Fluid ir mbient and fluid temperature 5 to 6 C (with no freezing) Proof pressure 1.5 MPa Maximum operating pressure 1. MPa Minimum operating pressure.5 MPa Set pressure range [W].5 to.7 MPa Nominal filtration rating [W/FM] W: 5 μm, FM:.3 μm (99.9% fi ltered particle size) Rated flow [L/min (NR)] [FM] Note 1) W L R FM / FD F ttachment Note 2) 3) Outlet side oil mist concentration [FM] MX 1. mg/m 3 (NR) (.8 ppm) owl material [W/FM] Polycarbonate owl guard [W/FM] Semi-standard (Steel) Standard (Polycarbonate) Construction [W] Relieving type Weight [kg] Note 1) Conditions: Mist separator inlet pressure:.5 MPa; The rated flow varies depending on the inlet pressure. Keep the air fl ow within the rated flow to prevent an outfl ow of lubricant to the outlet side. Note 2) When the compressor oil mist discharge concentration is 3 mg/m 3 (NR). Note 3) owl seal and other O-rings are slightly lubricated. 26

28 Series C2D- to C4D- Dimensions C2D- C3D- to C4D-6- Pressure gauge (Option) J J M F S J J P2 (Pressure gauge port size) M F S R Q1 V Q1 C U R H Q1 Q2 Q1 C IN OUT H IN OUT 2 x P1 (Port size) U Q2 Pressure gauge (Option) 2 x P1 (Port size) G Clearance for maintenance Drain Drain P2 (Pressure gauge port size) E G Clearance for maintenance Drain Drain pplicable model C2D- C3D- to C4D-6- Optional/Semi-standard specifications With auto drain (N.C.) With drain guide Metal bowl Metal bowl with drain guide With auto drain (N.O./N.C.) N.O.: lack N.C.: Grey Dimensions M5 x.8 Width across flats 14 1/8 Width across flats 14 1/8 Thread type/rc, G: ø1 One-touch fitting Thread type/npt: ø3/8" One-touch fitting pplicable model C3D- to C4D-6- Optional/Semi-standard specifications Metal bowl Metal bowl with drain guide Metal bowl with level gauge Metal bowl with level gauge, with drain guide With drain guide Drain cock with barb fitting Dimensions Width across flats 17 1/4 Width across Width across flats 17 1/4 flats 17 1/4 arb fitting applicable tubing: T64 Model Round type pressure gauge Optional specifications Round type pressure gauge (with colour zone) With auto drain With barb fitting Standard specifications Model racket mount P1 P2 C Note) E F G J M Q1 Q2 R S U V C2D- 1/8, 1/4 1/ C3D- 1/4, 3/8 1/ C4D- 1/4, 3/8, 1/2 1/ C4D-6-3/4 1/ Semi-standard specifications With drain guide Metal bowl Metal bowl with drain guide Metal bowl with level gauge Metal bowl with level gauge, with drain guide H J H J C2D- ø ø C3D- ø ø C4D- ø ø C4D-6- ø ø Note) The dimension of C is the length when the filter regulator knob is unlocked. 27

29 ir Combination Series C Options/ttachments Options/ttachments/Part No. Section Option Pressure gauge Note 1) ttachment Y11-M5- Part no. Model For C1- For C2- For C25- For C3- For C4- For C4-6- For C1- For C2- For C3- For C4- For C4-6- For C1- For C2- For C25- For C3- For C4- For C4-6- Type For C2C- For C25C- For C3C- For C4C- For C4C-6- For C2D- For C3D- For C4D- For C4D-6- Round Standard G27-1-R1 G G type.2 to.2 MPa setting G27-1-R1 Note 2) G G Round type Standard G L G L (with colour zone).2 to.2 MPa setting G L G L Spacer Y1- Y2- Y3- Y4- Y5- Spacer with bracket Y1T- Y2T- Y3T- Y4T- Y5T- Check valve Note 3) Note 4) KM2-1- KM3-(1)- KM4-(2)- (2) Pressure switch Note 4) IS1M-2- IS1M-3- IS1M-4- IS1M-5- T-spacer Note 3) Note 4) Y21-1- Y31-(1)- Y41-(2)- Y51-(2)- (2) Pressure relief VHS2-1 VHS3-2 3 port valve Note 4) VHS VHS4-6 Piping adapter Note 4) E1-M5- Pressure switch with piping adapter Note 4) Cross spacer Note 4) Y14-M5- IN 1- E IS1E Y C D E 2- E IS1E y-pass port size for redirecting air flow Y OUT 2- E IS1E Y Note 1) in round pressure gauge part numbers indicates a pipe thread type. No indication is necessary for R; however, indicate N for NPT. Please contact SMC regarding the pipe thread type NPT and the supply of pressure gauge with psi unit display specifications. Note 2) Standard pressure gauge Note 3) For F.R.L. units, port sizes without ( ) are standard specifications. Note 4) Separate interfaces are reuired for modular unit. Check Valve: (K) 1/8, 1/4, 3/8 Check valve E5-6- Y check valve with intermediate air release port can be easily installed to prevent a backfl ow of lubricant when redirecting the air fl ow and releasing the air on the outlet side of the regulator. KM w Pipe thread type e y-pass port size Specifications 3 1 KM2-28 KM3-55 KM4-111 e sure to use above check valves when redirecting the air flow on the inlet side of the lubricator. Threads for IN and OUT ports are not machined. w e Symbol Description ody size Rc N NPT F G 1 1/8 2 1/4 3 3/8 Model Effective area [mm 2 ] Symbol Model y-pass port size C D E pplicable model KM2-1/8, 1/ C2-, C2- KM3-1/8, 1/ C25- C3-, C3- KM4-1/4, 3/ C4-, C4- Note) Note) Cannot be mounted on the C4-6-. Refer to the attachment table above for standard by-pass port sizes applicable to the C. W L R FM / FD F ttachment W FM F FM R FR W L F RL C 28

30 Series C Pressure Switch: (S) compact integrated pressure switch can be easily installed and facilitates the pressure detection of the line. IS1M 3 Symbol Description ody size a Set pressure.1 to.4 MPa range 6 Note 1).1 to.6 MPa w.5 m Lead wire b L 3 m length Z 5 m Pressure unit of MPa c the scale plate P Note 2) MPa/psi dual scale Note 1) Set pressure range of 6P (L, Z) is.2 to.6 MPa (3 to 9 psi). Note 2) This product is for overseas use only according to the new Measurement Law. (The SI unit type is provided for use in Japan.) Specifications Fluid ir mbient and fluid temperature 5 to 6 C (with no freezing) Proof pressure 1. MPa Maximum operating pressure.7 MPa Set pressure range (when OFF).1 to.4 MPa Hysteresis.8 MPa or less Switch Characteristics w Semi-standard: Select one each for a to c. Semi-standard symbol: When more than one specification is reuired, indicate in alphanumeric order. Example) IS1M-3-6LP Contact point configuration Maximum contact point capacity Operating voltage: C, DC Maximum operating current 1a 2 V (C), 2 W (DC) 1 V or less 12 V to 24 VC, DC: 5 m 48 VC, DC: 4 m 1 VC, DC: 2 m Note) For detailed specifi cations on the IS1 series, refer to the section of our website IS1 series, T-Spacer: (T) M5 x.8, 1/8, 1/4, 3/8 Using a T-spacer facilitates the branching of air fl ow. T-spacer Symbol Port size Pressure switch D (13) (23) C (5) (3) (5) Centre of F.R.L. body Model C D pplicable model IS1M C2- IS1M C25-, C3- IS1M C4- IS1M C4-6- Separate spacers are reuired for modular unit. E Octagon.2.4 MPa.1.3 C Semi-standard D Centre of F.R.L. body Caution on Mounting If a T-spacer is used on the inlet side of the lubricator, lubricant may be mixed. Use the KM series check valve to avoid such possibility. 29 Model Note) Port size C D E pplicable model Y11-M5- M5 x C1-, C1- Y /8 C2-, C Y /4 C2C- Y /8 C25-, C C25C-, C3- Y /4 C3-, C3C- Y /4 C4-, C Y /8 C4C- Y /4 C4-6-, C Y /8 C4C-6- Note) in model numbers indicates a pipe thread type. No indication is necessary for Rc; however, indicate N for NPT, and F for G. Separate interfaces are reuired for modular unit. Refer to the attachment table on page 28 for standard port sizes when using with the C.

31 2 ttachments Series C Pressure Relief 3 Port Valve: (V) With the use of a pressure relief 3 port valve, pressure left in the line can be easily exhausted. VHS Semi-standard: Select one each for a to b. Semi-standard symbol: When more than one specification is reuired, indicate in alphanumeric order. Example) VHS3-3-RZ Specifications 3 3 w e r Symbol Description ody size w Pipe thread type N Note) NPT Rc F Note) G 1 1/8 e Port size 2 1/4 3 3/8 4 1/2 6 3/4 Flow Flow direction: Left to right a r Semistandard direction R Flow direction: Right to left b Pressure Name plate in imperial units: MPa unit Z Note) Name plate in imperial units: psi Note) For pipe thread type: NPT only. Port size Specifi cations Model IN OUT OUT EXH IN, OUT EXH C(dm 3 /s bar) b Cv C(dm 3 /s bar) b Cv VHS2 1/ /8 1/ VHS3 1/ /4 3/ / VHS4 3/8 3/ / VHS4-6 3/4 1/ Note) Use an air filter on the IN side for operating protection. Cross Spacer: 1/8, 1/4, 3/8, 1/2 IN Pressure relief 3 port valve SUP. SUP 3 øi 3 1 E D C EXH EXH. ø1 OUT H G F Symbol Key can be mounted when residual pressure is released. 2 x P1 (Port size) P2 (Port size) Standard specifi cations Model P1 P2 C D E F G H I VHS2 1/8, 1/4 1/ VHS3 1/4, 3/8 1/ VHS4 1/4, 3/8, 1/2 3/ VHS4-6 3/4 1/ F ttachment W FM F FM R FR W L F RL C Pipings are possible in all 4 directions. IN/OUT ports are not machined for threads. Please contact SMC if threaded (machined) ports are reuired. F: Without pipe thread E E Port size E C F Centre of F.R.L. body F FM / FD Cross spacer Caution on Mounting 1. When mounting a cross spacer directly on the inlet side of the lubricator, be sure to use the KM series check valve between the lubricator and cross spacer. 2. Factory mounting of a cross spacer on the C model is available as a special order. E D Model Note) E (Port size) C D pplicable model Y14-M5- M5 x C1- Y /8 Y / C2- Y /8 Y / C25-, C3- Y /4 Y / C4- Y /8 Y / C4-6- Note) in model numbers indicates a pipe thread type. No indication is necessary for Rc; however, indicate N for NPT, and F for G. If threaded IN/OUT ports are reuired, they are available as a special order. Please contact SMC. Two hexagon socket head plugs are included in the package. 3 R L W

32 Series C Piping dapter: M5 x.8, 1/8, 1/4, 3/8, 1/2, 3/4 piping adapter allows installation/removal of the component without removing the piping and thus makes maintenance easier. 31 Piping adapter IS1E Specifications 3 Switch Characteristics w D 3 e Port size r Centre of F.R.L. body Pressure Switch with Piping dapter Semi-standard: Select one each for a to d. Semi-standard symbol: When more than one specification is reuired, indicate in alphanumeric order. Example) IS1E-3N3-6PRZ Symbol Note 1) Set pressure range of 6P (L, R, Z) is.2 to.6 MPa (3 to 9 psi). Note 2) For pipe thread type: NPT only. Description Model Note) Port size D pplicable model E1-M5- M5 x C1- E2-1- 1/8 E2-2- 1/ C2- E2-3- 3/8 E3-2- 1/4 E3-3- 3/ C25-, C3- E3-4- 1/2 E4-2- 1/4 E4-3- 3/8 E4-4- 1/ C4- E4-6- 3/4 E5-6- 3/ C4-6- Note) in model numbers indicates a pipe thread type. No indication is necessary for Rc; however, indicate N for NPT, and F for G. Separate interfaces are reuired for modular unit. Factory mounting of a piping adapter on the C models is available as a special order. N ody size Rc Nw Pipe thread type N Note) NPT F Note) G Ne Nr Semi-standard a b c d Port size Set pressure range Lead wire length Pressure unit of the scale plate Mounting position Fluid mbient and fluid temperature Proof pressure Maximum operating pressure Set pressure range (when OFF) Hysteresis 1 1/8 2 1/4 3 3/8 4 1/2 6 3/4.1 to.4 MPa 6 Note 1).1 to.6 MPa.5 m L 3 m Z 5 m MPa P Note 2) MPa/psi dual scale Right R Left ir 5 to 6 C (with no freezing) 1. MPa.7 MPa.1 to.4 MPa.8 MPa or less Contact point configuration 1a Maximum contact point capacity 2 V (C), 2 W (DC) Operating voltage: C, DC 1 V or less 12 V to 24 V C, DC: 5 m Maximum operating current 48 V C, DC: 4 m 1 V C, DC: 2 m Symbol Left Port size D (13) C (23) Right Pressure switch with piping adapter 23 E (5) (3) (5) Centre of F.R.L. body Model Note 1) Port size C D E pplicable model IS1E-21-1/8 IS1E-22-1/ C2- IS1E-23-3/8 IS1E-32-1/4 IS1E-33-3/ C25-, C3- IS1E-34-1/2 IS1E-42-1/4 IS1E-43-3/8 Note 2) IS1E-44-1/2 C4- IS1E-46-3/4 Note 1) in the model numbers indicates a pipe thread type. No indication is necessary for Rc; however, indicate N for NPT, and F for G. Note 2) Cannot be mounted on the C4-6-. Separate interfaces are reuired for modular unit. The pressure switch on the C4-6- can be mounted by screwing IS1-1S into the piping adapter E5-6--X51 (with top-face thread Rc1/8). Products with a premounted switch are available as a special order. Please contact SMC regarding their availability..2.4 MPa.1.3

33 Series C ccessories (Spacers/rackets) Spacer C D Centre of F.R.L. body C F RL Seal Model C D pplicable model Y C1- Y C2- Y C25-, C3- Y C4- Y C4-6- (Spacer width) W L FR Replacement Parts Description Material Spacer with racket Part no. Y2- Y4- Y1- Y2- Y3- Y4- Y5- Seal HNR (NR) Note 1) Y12P-5S Note 2) Y22P-5S Y32P-5S Y42P-5S Y52P-5S Note 1) ( ): Size 1 Note 2) ssembly of 2 O-rings F FM R W FM Seal D K J Centre of F.R.L. body EE (Y1T-, Y2T- only) E E G H F C (Spacer width) F ttachment FM / FD Model C D E EE F G H J K pplicable model Y1T C1- Y2T C2- Y3T C25-, C3- Y4T C4- Y5T C4-6- R L Replacement Parts Description Material Part no. Y2T- Y4T- Y1T- Y2T- Y3T- Y4T- Y5T- Seal HNR (NR) Note 1) Y12P-5S Note 2) Y22P-5S Y32P-5S Y42P-5S Y52P-5S Note 1) ( ): Size 1 Note 2) ssembly of 2 O-rings 32 W

34 Series C Mounting Position for Spacer with racket racket T-spacer: T Pressure switch: S Check valve: K Pressure relief 3 port valve: V IN OUT IN OUT racket ttachment Model ttachment Model ttachment Model ttachment Model ttachment Model K S V KS KV KSV SV C1- C C C C ttachment Model K S T V KS KT KV KST C C C C C C KSV KTV KSTV ST SV STV TV C1- C C C C C S T V V1 SV SV1 TV TV C1-28 C C C C C S T V V1 SV SV1 TV TV C2C C25C C3C C4C C4C S V V1 SV SV C2D C3D C4D C4D : Dimension from the end of the IN side to the centre of the mounting hole for the fi rst bracket. 2: Mounting hole pitch between the first and the second brackets. 3: Mounting hole pitch between the second and the third brackets. 4: Mounting hole pitch between the third and the fourth brackets. 33

35 Modular Type ir Filters Series F/FM/FD C ir Filter Series F Model Port size F1- M5 x.8 Filtration μm Options F RL F2-1/8, 1/4 F3-1/4, 3/8 F4-1/4, 3/8, 1/2 F4-6- 3/4 5 racket (Except F1-) Float type auto drain FR W L P.35 to 43 Mist Separator Series FM F5-3/4, 1 F6-1 FM2-1/8, 1/4 F FM R FM3-1/4, 3/8 FM4-1/4, 3/8, 1/2.3 racket Float type auto drain W FM P.45 to 52 Micro Mist Separator Series FD FM4-6- 3/4 FD2-1/8, 1/4 FD3-1/4, 3/8 FD4-1/4, 3/8, 1/2.1 racket Float type auto drain F ttachment P.45 to 52 FD4-6- 3/4 FM / FD W L R 34

36 ir Filter F1- to F6- Symbol ir Filter ir Filter with uto Drain w e r 35 Option L F t Semi-standard 3 Pipe thread type a b Port size Mounting Float type auto drain Note 6) c owl L Symbol Description ody size Metric thread (M5) Rc N Note 1) NPT F Note 2) G M5 M5 x.8 1 1/8 2 1/4 3 3/8 4 1/2 6 3/4 1 1 Without mounting option Note 3) With bracket Without auto drain C Note 4) N.C. (Normally closed) Drain port is closed when pressure is not applied. D Note 5) N.O. (Normally open) Drain port is open when pressure is not applied. Polycarbonate bowl 2 Metal bowl 6 Nylon bowl 8 Metal bowl with level gauge C With bowl guard Note 7) Note 7) Note 7) Note 7) 6C With bowl guard (Nylon bowl) Note 8) Note 8) Note 8) Note 8) With drain cock d Drain port Note 9) Drain guide 1/8 J Note 1) Drain guide 1/4 W Note 11) Drain cock with barb fitting e f w Flow direction Pressure unit 3 e D r t How to Order Made to Order (Refer to pages 42 and 43 for details.) F1- F2- F4- Option/Semi-standard: Select one each for a to f. Option/Semi-standard symbol: When more than one specifi cation is reuired, indicate in alphanumeric order. Example) F3-3D-R- Flow direction: Left to right R Flow direction: Right to left Name plate and caution plate for bowl in imperial units: MPa Z Note 12) Name plate and caution plate for bowl in imperial units: psi, F Note 13) Note 13) Note 13) Note 13) Note 13) Note 13) Note 1) Drain guide is NPT1/8 (applicable to the F2-) and NPT1/4 (applicable to the F3- to F6-). The auto drain port comes with ø3/8" One-touch fitting (applicable to the F3- to F6-). Note 2) Drain guide is G1/8 (applicable to the F2-) and G1/4 (applicable to the F3- to F6-). The auto drain port comes with ø1 One-touch fitting (applicable to the F3- to F6-). Note 3) Option is not assembled and supplied loose at the time of shipment. ssembly of a bracket and 2 mounting screws. Note 4) When pressure is not applied, condensate which does not start the auto drain mechanism will be left in the bowl. Releasing the residual condensate before ending operations for the day is recommended. Note 5) If the compressor is small (.75 kw, discharge fl ow is less than 1 L/min [NR]), air leakage from the drain cock may occur during start of operations. N.C. type is recommended. Note 6) Refer to Chemical data on page 38 for chemical resistance of the bowl. Note 7) bowl guard is provided as standard euipment (polycarbonate). Note 8) bowl guard is provided as standard euipment (nylon). Note 9) The combination of float type auto drain: C and D is not available. Note 1) Without a valve function Note 11) The combination of metal bowl: 2 and 8 is not available. Note 12) For pipe thread type: M5, NPT. Note 13) : For pipe thread type: M5, NPT only

37 ir Filter Series F1- to F6- Standard Specifications Model F1- F2- F3- F4- F4-6- F5- F6- Port size M5 x.8 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2 3/4 3/4, 1 1 Fluid ir mbient and fluid temperature 5 to 6 C (with no freezing) Proof pressure 1.5 MPa Maximum operating pressure 1. MPa Nominal filtration rating 5 μm Drain capacity [cm 3 ] owl material Polycarbonate owl guard Semi-standard (Steel) Standard (Polycarbonate) Weight [kg] Options/Part No. Model Optional specifications F1- F2- F3- F4- F4-6- F5- F6- racket assembly Note) F22P-5S F32P-5S F42P-5S F42P-7S F52P-5S Note) ssembly of a bracket and 2 mounting screws owl ssembly/part No. owl material Polycarbonate bowl Nylon bowl Metal bowl Drain discharge mechanism Manual discharge Drain port Other Model F1- F2- F3- F4- F4-6- F5- F6- C1SF- C2SF- With drain cock With bowl guard C2SF-C- C3SF- C4SF- Drain cock with barb fitting With bowl guard C3SF-W- C4SF-W- With drain guide (without valve function) utomatic discharge Note) Normally closed (N.C.) (uto drain) Manual discharge C2SF-J- With bowl guard C2SF-CJ- C3SF-J- C4SF-J- D17- D27- With bowl guard D27-C- D37- D47- Normally open (N.O.) With bowl guard D38- D48- C1SF-6- C2SF-6- With drain cock With bowl guard C2SF-6C- C3SF-6- C4SF-6- Drain cock with barb fitting With bowl guard C3SF-6W- C4SF-6W- With drain guide (without valve function) utomatic discharge Note) Normally closed (N.C.) (uto drain) Manual discharge C2SF-6J- With bowl guard C2SF-6CJ- C3SF-6J- C4SF-6J- D17-6- D27-6- With bowl guard D27-6C- D37-6- D47-6- Normally open (N.O.) With bowl guard D38-6- D48-6- With drain cock With drain guide (without valve function) utomatic Normally closed (N.C.) discharge Note) (uto drain) Normally open (N.O.) C1SF-2- C2SF-2- C3SF-2- C4SF-2- With level gauge C3LF-8- C4LF-8- C2SF-2J- C3SF-2J- C4SF-2J- With level gauge C3LF-8J- C4LF-8J- D17-2- D27-2- D37-2- D47-2- With level gauge D37-8- D47-8- D38-2- D48-2- With level gauge D38-8- D48-8- Note) Minimum operating pressure: N.O. type.1 MPa (D38-, D48-); N.C. type.1 MPa (D17-, D27-) and.15 MPa (D37-, D47-). owl assembly for the F2- to F6- models comes with a bowl seal. in bowl assembly part numbers indicates a pipe thread type (applicable tubing for auto drain). No indication is necessary for Rc thread; however, indicate N for NPT thread, and F for G thread. (For auto drain, : ø1, N: ø3/8") Please consult with SMC separately for psi and F unit display specifications. L R FM / FD F ttachment W FM F FM R FR W L F R L C W 36

38 Series F1- to F6- Flow-rate Characteristics (Representative values) F1- M5 F2- Rc1/4 F3- Rc3/8 Pressure drop [MPa] P1=.1 MPa P1=.3 MPa P1=.5 MPa P1=.7 MPa Pressure drop [MPa] P1=.1 MPa P1=.3 MPa P1=.5 MPa P1=.7 MPa Pressure drop [MPa] P1=.1 MPa P1=.3 MPa P1=.5 MPa P1=.7 MPa Flow rate L/min (NR) Flow rate L/min (NR) Flow rate L/min (NR) F4- Rc1/2 F4-6- Rc3/4 F5- Rc1 Pressure drop [MPa] P1=.1 MPa P1=.3 MPa P1=.5 MPa P1=.7 MPa Pressure drop [MPa] P1=.1 MPa P1=.3 MPa P1=.5 MPa P1=.7 MPa Pressure drop [MPa] P1=.1 MPa P1=.3 MPa P1=.5 MPa P1=.7 MPa Flow rate L/min (NR) Flow rate L/min (NR) Flow rate L/min (NR) F6- Rc1 Pressure drop [MPa] P1=.1 MPa P1=.3 MPa P1=.5 MPa P1=.7 MPa Flow rate L/min (NR) 37

39 ir Filter Series F1- to F6- Warning Design/Selection 1. The standard bowl for the air filter, filter regulator, and lubricator, as well as the sight dome for the lubricator are made of polycarbonate. Do not use in an environment where they are exposed to or come in contact with organic solvents, chemicals, cutting oil, synthetic oil, alkali, and thread lock solutions. Effects of atmosphere of organic solvents and chemicals, and where these elements are likely to adhere to the euipment. Chemical data for substances causing degradation (Reference) When the above factors are present, or there is some doubt, use a metal bowl for safety. Specific Product Precautions e sure to read this before handling. Refer to the back cover for Safety Instructions, Handling Precautions for SMC Products and the Operation Manual for F.R.L. Precautions, cid lkaline Type Chemical name pplication examples Inorganic salts Chlorine solvents romatic series Ketone lcohol Oil Ester Ether Hydrochloric acid Sulfuric acid, Phosphoric acid Chromic acid Sodium hydroxide (Caustic soda) Potash Calcium hydroxide (Slack lime) mmonia water Carbonate of soda Sodium sulfi de Sulfate of potash Sulfate of soda Carbon tetrachloride Chloroform Ethylene chloride Methylene chloride enzene Toluene Paint thinner cetone Methyl ethyl ketone Cyclohexane Ethyl alcohol IP Methyl alcohol Gasoline Kerosene Phthalic acid dimethyl Phthalic acid diethyl cetic acid Methyl ether Ethyl ether cid washing liuid for metals Degreasing of metals Industrial salts Water-soluble cutting oil Polycarbonate Material Nylon Cleansing liuid for metals Printing ink Dilution Coatings Dry cleaning Photographic fi lm Dry cleaning Textile industries ntifreeze dhesives Synthetic oil nti-rust additives rake oil additives mino Methyl amino Cutting oil rake oil additives Rubber accelerator Others Thread-lock fl uid Seawater Leak tester : Essentially safe : Some effects may occur. : Effects will occur. Warning Maintenance 1. Replace the element every 2 years or when the pressure drop becomes.1 MPa, whichever comes fi rst, to prevent damage to the element. Caution Mounting/djustment 1. When the bowl is installed on the air fi lter (F3- to F6-), install them so that the lock button lines up to the groove of the front (or the back) of the body to avoid drop or damage of the bowl. Lock button W L R FM / FD F ttachment W FM F FM R FR W L F RL C 38

40 Series F1- to F6- Working Principle: Float Type uto Drain N.O. type: D38-, D48- N.C. type: D37-, D47- Compact auto drain N.C. type: D17-, D27- owl Valve Lever Float Valve seat Chamber Spring Piston Housing Seal Drain cock owl Valve Lever Float Valve seat Chamber Piston Spring Housing Seal Drain cock Drain owl Float Lever Valve Valve seat Knob Drain Drain When pressure inside the bowl is released: When pressure is released from the bowl, the piston u is lowered by the spring y. The sealing action of the seal! is interrupted, and the outside air flows inside the bowl through the housing hole o and the drain cock!1. Therefore, if there is an accumulation of condensate in the bowl, it will drain out through the drain cock. When pressure is applied inside the bowl: When pressure is.1 MPa or more, the force of the piston u surpasses the force of the spring y, and the piston goes up. This pushes seal! up so that it creates a seal, and the inside of the bowl, is shut off from the outside air. If there is no accumulation of condensate in the bowl at this time, the fl oat w will be pulled down by its own weight, causing the valve r, which is connected to the lever e, to seal the valve seat t. When there is an accumulation of condensate in the bowl: The fl oat w rises due to its own buoyancy and the seal at the valve seat t is interrupted. This allows the pressure inside the bowl to enter the chamber i. The result is that the combined pressure inside the chamber i and the force of the spring y lowers the piston u. This causes the sealing action of the seal! to be interrupted, and the accumulated condensate in the bowl drains out through the drain cock!1. Turning the drain cock!1 manually counterclockwise lowers the piston u, and causes the seal created by the seal! to be interrupted, thus allowing the condensate to drain out. 39 When pressure inside the bowl is released: Even when pressure inside the bowl is released, spring y keeps the piston u in its upward position. This keeps the seal created by the seal! in place; thus, the inside of the bowl is shut off from the outside air. Therefore, even if there is an accumulation of condensate in the bowl, it will not drain out. When pressure is applied inside the bowl: Even when pressure is applied inside the bowl, the combined force of the spring y and the pressure inside the bowl keeps the piston u in its upward position. This maintains the seal created by the seal! in place; thus, the inside of the bowl is shut off from the outside air. If there is no accumulation of condensate in the bowl at this time, the fl oat w will be pulled down by its own weight, causing the valve r, which is connected to the lever e, to seal the valve seat t. When there is an accumulation of condensate in the bowl: The fl oat w rises due to its own buoyancy and the seal at the valve seat t is interrupted.this allows the pressure inside the bowl to enter the chamber i. The result is that the pressure inside the chamber i surpasses the force of the spring y and pushes the piston u downward. This causes the sealing action of the seal! to be interrupted and the accumulated condensate in the bowl drains out through the drain cock!1. Turning the drain cock!1 manually counterclockwise lowers the piston u, and causes the seal created by the seal! to be interrupted, thus allowing the condensate to drain out. When pressure inside the bowl is released: Even when pressure inside the bowl is released, the weight of the float w causes the valve r, which is connected to the lever e, to seal the valve seat t. s a result, the inside of the bowl is shut off from the outside air. Therefore, even if there is an accumulation of condensate in the bowl, it will not drain out. When pressure is applied inside the bowl: Even when pressure is applied inside the bowl, the weight of the fl oat w and the differential pressure that is applied to the valve r cause the valve r to seal the valve seat t, and the outside air is shut off from the inside of the bowl. When there is an accumulation of condensate in the bowl: The fl oat w rises due to its own buoyancy and the seal at the valve seat t is interrupted. The condensate inside the bowl drains out through the knob y. Turning the knob y manually counterclockwise lowers it and causes the sealing action of the valve seat t to be interrupted, which allows the condensate to drain out.

41 ir Filter Series F1- to F6- Construction F1-/F2- F3- to F4-6- F5-/F6- C IN OUT IN OUT IN OUT F R L W L FR Drain F FM R Drain Drain Component Parts No. Description Material Model Colour Zinc die-cast F1-1 ody White luminum die-cast F2- to F6-6 Housing luminum die-cast F5- /F6- White Replacement Parts No. Description Material Part no. F1- F2- F3- F4- F4-6- F5- F6-2 Filter element Non-woven fabric F1P-6S F2P-6S F3P-6S F4P-6S F5P-6S F6P-6S 3 affle PT F1P-4S Note 2) F22P-4S F32P-4S F42P-4S F5P-4S F6P-4S 4 owl seal NR C1SFP-26S C2SFP-26S C32FP-26S C42FP-26S 5 owl assembly Note 1) Polycarbonate C1SF- C2SF- C3SF- C4SF- Note 1) owl seal is included for the F2- to F6-. Please contact SMC regarding the supply of bowl assembly with psi and F unit display specifi cations. Note 2) The baffl e material for the F1- (F1P-4S) only is polyacetal. W W FM F ttachment FM / FD R L 4

42 Series F1- to F6- Dimensions F1-/F2- F5-/F6- J R M U D V Q racket (Option) 2 x P (Port size) IN T N S OUT C J D M U racket (Option) R T N S F3- to F4-6- J R M U D racket (Option) Drain T N S Clearance for maintenance G V Q 2 x P (Port size) IN OUT C IN V Q 2 x P (Port size) OUT C E Drain Clearance for maintenance G Drain Clearance for maintenance G pplicable model F1-/F2- F2- F3- to F6- Optional/Semi-standard specifications With auto drain (N.C.) Metal bowl With drain guide Metal bowl with drain guide With auto drain (N.O./N.C.) Dimensions M5 x.8 Width across flats 14 1/8 Width across flats 14 1/8 N.O.: lack N.C.: Grey Thread type/rc, G: ø1 One-touch fitting Thread type/npt: ø3/8" One-touch fitting pplicable model F3- to F6- Optional/Semi-standard specifications Metal bowl Metal bowl with drain guide Metal bowl with level gauge Metal bowl with level gauge, with drain guide With drain guide Drain cock with barb fitting Dimensions Width across flats 17 1/4 Width across Width across flats 17 1/4 flats 17 1/4 arb fitting applicable tubing: T64 Optional specifications Semi-standard specifications Model Standard specifications racket mount P C D E G J M N Q R S T U V F1- M5 x F2-1/8, 1/ F3-1/4, 3/ F4-1/4, 3/8, 1/ F4-6- 3/ F5-3/4, F With auto drain With barb fitting With drain guide Metal bowl Metal bowl with drain guide Metal bowl with level gauge Metal bowl with level gauge, with drain guide

43 ir Filter/F2- to F4-6- Made to Order Please contact SMC for detailed dimensions, specifi cations and lead times. Drain capacity is greater than that of standard models. pplicable Model/Drain Capacity Note) Please consult with SMC for dimensions. F 3 w 3 e r Long owl X64 Semi-standard: Select one each for a to d. Option/Semi-standard symbol: When more than one specifi cation is reuired, indicate in alphanumeric order. Example) F3-3-2R--X64 w e r t Semi-standard Model F2- F3- F4- F4-6- Port size 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2 3/4 Drain capacity [cm 3 ] Pipe thread type Port size Option (Mounting) a b c d Note 4) owl Drain port Flow direction Pressure unit Symbol Note 1) Drain guide is NPT1/8 (applicable to the F2-) and NPT1/4 (applicable to the F3- to F4-6-). Note 2) Drain guide is G1/8 (applicable to the F2-) and G1/4 (applicable to the F3- to F4-6-). Note 3) bracket is not assembled and supplied loose at the time of shipment. Including 2 mounting screws. Note 4) Refer to Chemical data on page 38 for chemical resistance of the bowl. Note 5) bowl guard is provided as standard euipment (polycarbonate). Note 6) bowl guard is provided as standard euipment (nylon). Note 7) Without a valve function Note 8) The combination of metal bowl: 2 is not available. Note 9) For pipe thread type: NPT. Note 1) : For pipe thread type: NPT only t Description Long bowl ody size Rc N Note 1) NPT F Note 2) G 1 1/8 2 1/4 3 3/8 4 1/2 6 3/4 Without mounting option Note 3) With bracket Polycarbonate bowl 2 Metal bowl 6 Nylon bowl C With bowl guard Note 5) Note 5) 6C With bowl guard (Nylon bowl) Note 6) Note 6) With drain cock Drain guide 1/8 J Note 7) Drain guide 1/4 Note 8) W Drain cock with barb fi tting (for ø6 x ø4 nylon tube) Flow direction: Left to right R Flow direction: Right to left Name plate and caution plate for bowl in imperial units: MPa Note 9) Z Name plate and caution plate for bowl in imperial units: psi, F Note 1) Note 1) Note 1) 42 W L R FM / FD F ttachment W FM F FM R FR W L F R L C

44 ir Filter/F2- to F4-6- Made to Order Please contact SMC for detailed dimensions, specifi cations and lead times. w With Element Service Indicator Clogging status of elements can be checked visually. pplicable Model F 43 3 w 3 e r t X2141 Option/Semi-standard: Select one each for a to f. Option/Semi-standard symbol: When more than one specification is reuired, indicate in alphanumeric order. Example) F3-3D-2R--X2141 With element service indicator special body type is reuired to mount the element service indicator. It cannot be mounted on a standard body. Symbol Description ody size Rc w Pipe thread type N Note 1) NPT F Note 2) G 1 1/8 2 1/4 e Port size 3 3/8 4 1/2 6 3/4 a Mounting Without mounting option Note 3) With bracket r t Option Semi-standard Model F2- F3- F4- F4-6- Port size 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2 3/4 b Float type auto drain Note 6) c owl Without auto drain C Note 4) N.C. (Normally closed) Drain port is closed when pressure is not applied. D Note 5) N.O. (Normally open) Drain port is open when pressure is not applied. Polycarbonate bowl 2 Metal bowl 6 Nylon bowl 8 Metal bowl with level gauge C With bowl guard Note 7) 6C With bowl guard (Nylon bowl) Note 8) With drain cock Drain guide 1/8 d Drain port Note 12) J Note 9) Drain guide 1/4 W Note 13) Drain cock with barb fi tting (for ø6 x ø4 nylon tube) e Flow direction Flow direction: Left to right R Flow direction: Right to left Name plate and caution plate for bowl in imperial units: MPa f Pressure unit Z Note 1) Name plate and caution plate for bowl in imperial units: psi, F Note 11) Note 11) Note 11) Note 1) Drain guide is NPT1/8 (applicable to the F2-) and NPT1/4 (applicable to the F3- to F4-6-). The auto drain port comes with ø3/8" One-touch fitting (applicable to the F3- to F4-6-). Note 2) Drain guide is G1/8 (applicable to the F2-) and G1/4 (applicable to the F3- to F4-6-). Note 3) bracket is not assembled and supplied loose at the time of shipment. Including 2 mounting screws. Note 4) When pressure is not applied, condensate which does not start the auto drain mechanism will be left in the bowl. Releasing the residual condensate before ending operations for the day is recommended. Note 5) If the compressor is small (.75 kw, discharge flow is less than 1 L/min [NR]), air leakage from the drain cock may occur during start of operations. N.C. type is recommended. Note 6) Refer to Chemical data on page 38 for chemical resistance of the bowl. Note 7) bowl guard is provided as standard euipment (polycarbonate). Note 8) bowl guard is provided as standard euipment (nylon). Note 9) Without a valve function Note 1) For pipe thread type: NPT. Note 11) : For pipe thread type: NPT only Note 12) The combination of fl oat type auto drain: C and D is not available. Note 13) The combination of metal bowl: 2 and 8 is not available. Note 7) Note 8)

45 ir Filter F1 to F6 Made to Order Specifications: Please contact SMC for detailed dimensions, specifications, and lead times. Semi-standard e Special Temperature Environment Special materials are used in the manufacturing of seals and resin parts to allow them to withstand various temperature conditions in cold or tropical (hot) climates. Specifications Made-to-order no. -X43 -X44 Environment Low temperature High temperature mbient temperature [ C] 3 to 6 5 to 8 Fluid temperature [ C] Material pplicable Model F 3 Thread type Port size Symbol Description ody size Rc N Note 1) NPT F Note 2) G 2 1/4 3 3/8 4 1/2 6 3/4 1 1 Option Without mounting option (Mounting) Note 3) With bracket owl Note 4) 2 Metal bowl a b Drain port Flow direction c Pressure unit With drain cock J Note 5) Drain guide 1/4 Flow direction: Left to right R Flow direction: Right to left 3 Semi-standard: Select one each for a to c. Semi-standard symbol: When more than one specification is reuired, indicate in alphanumeric order. Example) F3-3-2R-X43 Name plate and caution plate for bowl in imperial units: MPa Name plate and caution Z Note 6) plate for bowl in imperial units: psi, F 5 to 6 (with no freezing) Rubber parts Special NR FKM Main parts Metal (luminium die-cast, etc.) Model F3 F4 F4-6 F5 F6 Port size 1/4, 3/8 1/4, 3/8, 1/2 3/4 3/4, X43 X44 Note 7) Note 7) Note 7) Note 7) Note 1) Drain guide is NPT 1/4. Note 2) Drain guide is G 1/4. Note 3) bracket is not assembled and supplied loose at the time of shipment. Including 2 mounting screws Note 4) Only metal bowl 2 is available. Note 5) Without a valve function Note 6) For thread type: NPT. Note 7) p: For thread type: NPT only X43 For high/low temperature Low temperature High temperature Semi-standard Thread type Port size Symbol Description ody size Rc N Note 1) NPT F Note 2) G 1 1/8 2 1/4 3 3/8 4 1/2 6 3/4 1 1 Option Without mounting option (Mounting) Note 3) With bracket 2 owl Note 4) Metal bowl 8 Metal bowl with level gauge a b Drain port Flow direction c Pressure unit With drain cock J Note 5) Drain guide 1/8 Drain guide 1/4 Flow direction: Left to right R Flow direction: Right to left r High Pressure Strong materials are used in the manufacturing of air filters intended for high pressure operation. Specifications pplicable Model F Made-to-order no. -X425 Proof pressure [MPa] 3. Maximum operating pressure [MPa] 2. mbient and fluid temperature [ C] 3 3 Name plate and caution plate for bowl in imperial units: MPa Name plate and caution Z Note 6) plate for bowl in imperial units: psi, F 5 to 6 (with no freezing) Model F2 F3 F4 F4-6 F5 F6 Port size 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2 3/4 3/4, 1 1 X425 Note 7) Note 7) Note 7) Note 7) Note 7) Note 1) Drain guide is NPT 1/8 (applicable to the F2) and NPT 1/4 (applicable to the F3 to F6). Note 2) Drain guide is G 1/8 (applicable to the F2) and G 1/4 (applicable to the F3 to F6). Note 3) bracket is not assembled and supplied loose at the time of shipment. Including 2 mounting screws Note 4) Only metal bowl 2 and 8 are available. Note 5) Without a valve function Note 6) For thread type: NPT. Note 7) p: For thread type: NPT only 2 For high pressure Semi-standard: Select one each for a to c. Semi-standard symbol: When more than one specification is reuired, indicate in alphanumeric order. Example) F3-3-2R-X W L R FM / FD F ttachment W FM F FMR FR W L FRL C

46 Mist Separator FM2- to FM4- Micro Mist Separator FD2- to FD4- Series FM Nominal filtration rating:.3 μm Series FD Nominal filtration rating:.1 μm How to Order Symbol Mist Separator 1 1 L L 2 Micro Mist Separator 2 FM2- FD2- FM4- FD4- FM 3 FD w e r t 45 Option Semi-standard 3 Pipe thread type a b Port size Mounting Float type auto drain Note 6) c owl w Symbol 3 D 3 e D r t Description Option/Semi-standard: Select one each for a to f. Option/Semi-standard symbol: When more than one specifi cation is reuired, indicate in alphanumeric order. Example) FM3-3D-R- Made to Order (Refer to pages 51 and 52 for details.) ody size Rc N Note 1) NPT F Note 2) G 1 1/8 2 1/4 3 3/8 4 1/2 6 3/4 Without mounting option Note 3) With bracket Without auto drain C Note 4) N.C. (Normally closed) Drain port is closed when pressure is not applied. D Note 5) N.O. (Normally open) Drain port is open when pressure is not applied. Polycarbonate bowl 2 Metal bowl 6 Nylon bowl 8 Metal bowl with level gauge C With bowl guard Note 7) Note 7) 6C With bowl guard (Nylon bowl) Note 8) Note 8) With drain cock Drain guide 1/8 d Drain port Note 12) J Note 9) Drain guide 1/4 W Note 13) Drain cock with barb fitting (for ø6 x ø4 nylon tube) Flow direction: Left to right e Flow direction R Flow direction: Right to left Name plate and caution plate for bowl in imperial units: MPa f Pressure unit Z Note 1) Name plate and caution plate for bowl in imperial units: psi, F Note 11) Note 11) Note 11) Note 1) Drain guide is NPT1/8 (applicable to the FM2-, FD2-) and NPT1/4 (applicable to the FM3-/4-, FD3-/4-). The auto drain port comes with ø3/8" One-touch fitting (applicable to the FM3-/4-, FD3-/4-). Note 2) Drain guide is G1/8 (applicable to the FM2-, FD2-) and G1/4 (applicable to the FM3-/4-, FD3-/4-). Note 3) bracket is not assembled and supplied loose at the time of shipment. Including 2 mounting screws Note 4) When pressure is not applied, condensate which does not start the auto drain mechanism will be left in the bowl. Releasing the residual condensate before ending operations for the day is recommended. Note 5) If the compressor is small (.75 kw, discharge flow is less than 1 L/min [NR]), air leakage from the drain cock may occur during start of operations. N.C. type is recommended. Note 6) Refer to Chemical data on page 48 for chemical resistance of the bowl. Note 7) bowl guard is provided as standard euipment (polycarbonate). Note 8) bowl guard is provided as standard euipment (nylon). Note 9) Without a valve function Note 1) For pipe thread type: NPT. Note 11) : For pipe thread type: NPT only Note 12) The combination of fl oat type auto drain: C and D is not available. Note 13) The combination of metal bowl: 2 and 8 is not available.

47 Mist Separator Series FM2- to FM4- Micro Mist Separator Series FD2- to FD4- Standard Specifications Model FM2- FM3- FM4- FM4-6- FD2- FD3- FD4- FD4-6- Port size 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2 3/4 Fluid ir mbient and fluid temperature 5 to 6 C (with no freezing) Proof pressure 1.5 MPa Maximum operating pressure 1. MPa Minimum operating pressure.5 MPa Nominal filtration rating FM2- to FM μm (99.9% fi ltered particle size) FD2- to FD μm (99.9% fi ltered particle size) Outlet side oil mist FM2- to FM4-6- Max. 1. mg/m 3 Note 2) Note 3) (NR) (.8 ppm) concentration FD2- to FD4-6- Max..1 mg/m 3 (NR) (efore saturated with oil.1 mg/m 3 (NR) or less.8 ppm) FM2- to FM Rated flow (L/min (NR)) Note 1) FD2- to FD Drain capacity (cm 3 ) owl material Polycarbonate owl guard Semi-standard (Steel) Standard (Polycarbonate) Weight [kg] Note 1) Conditions: Inlet pressure:.7 MPa; The rated flow varies depending on the inlet pressure. Keep the air fl ow within the rated flow to prevent an outfl ow of lubricant to the outlet side. Note 2) When the compressor oil mist discharge concentration is 3 mg/m 3 (NR). Note 3) owl seal and other O-rings are slightly lubricated. Options/Part No. owl ssembly/part No. owl material Polycarbonate bowl Nylon bowl Metal bowl Optional specifi cations Drain discharge mechanism Manual discharge utomatic Note) discharge (uto drain) Manual discharge utomatic Note) discharge (uto drain) Manual discharge utomatic Note) discharge (uto drain) FM2- FD2- FM3- FD3- Model Drain port Other FM2- FD2- FM3- FD3- FM4- FD4- FM4-6- FD4-6- With drain cock C2SF- With bowl guard C2SF-C- C3SF- C4SF- Drain cock with barb fitting With bowl guard C3SF-W- C4SF-W- With drain guide C2SF-J- (without valve function) With bowl guard C2SF-CJ- C3SF-J- C4SF-J- Normally closed (N.C.) D27- With bowl guard D27-C- D37- D47- Normally open (N.O.) With bowl guard D38- D48- With drain cock C2SF-6- With bowl guard C2SF-6C- C3SF-6- C4SF-6- Drain cock with barb fitting With bowl guard C3SF-6W- C4SF-6W- With drain guide C2SF-6J- (without valve function) With bowl guard C2SF-6CJ- C3SF-6J- C4SF-6J- D27-6- Normally closed (N.C.) With bowl guard D27-6C- D37-6- D47-6- Normally open (N.O.) With bowl guard D38-6- D48-6- C2SF-2- C3SF-2- C4SF-2- With drain cock With level gauge C3LF-8- C4LF-8- With drain guide C2SF-2J- C3SF-2J- C4SF-2J- (without valve function) With level gauge C3LF-8J- C4LF-8J- Normally closed (N.C.) D27-2- D37-2- D47-2- With level gauge D37-8- D47-8- Normally open (N.O.) D38-2- D48-2- With level gauge D38-8- D48-8- Note) Minimum operating pressure: N.O. type.1 MPa (D38-, D48-); N.C. type.1 MPa (D17-, D27-) and.15 MPa (D37-, D47-). owl assembly for the FM2- to FM4-6-, FD2- to FD4-6- models comes with a bowl seal. in bowl assembly part numbers indicates a pipe thread type (applicable tubing for auto drain). No indication is necessary for Rc thread; however, indicate N for NPT thread, and F for G thread. (For auto drain, : ø1, N: ø3/8") Please consult with SMC separately for psi and F unit display specifications. Model FM4- FD4- Note 2) Note 3) FM4-6- FD4-6- racket assembly Note 1) F22P-5S F32P-5S F42P-5S F42P-7S N.C. D27- D37- D47- Float type auto drain Note 2) Note 3) N.O. D38- D48- Note 1) ssembly of a bracket and 2 mounting screws Note 2) Minimum operating pressure: N.O. type.1 MPa; N.C. type.1 MPa (D27-) and.15 MPa (D37-/D47-). Please consult with SMC separately for psi and F unit display specifi cations. Note 3) Please consult with SMC for details on drain piping to fi t NPT or G port sizes. 46 W L R FM / FD F ttachment W FM F FM R FR W L F R L C

48 Series FM2- to FM4- Series FD2- to FD4- Flow-rate Characteristics (Representative values) FM2- FD2- When saturated with oil Initial state Pressure drop [MPa] P1=.3 MPa P1=.3 MPa P1=.5 MPa P1=.5 MPa P1=.7 MPa P1=.7 MPa Pressure drop [MPa] P1=.3 MPa P1=.3 MPa P1=.5 MPa P1=.5 MPa P1=.7 MPa P1=.7 MPa Flow rate L/min (NR) Flow rate L/min (NR) FM3- FD3- Pressure drop [MPa] P1=.3 MPa P1=.3 MPa P1=.5 MPa P1=.5 MPa P1=.7 MPa P1=.7 MPa Pressure drop [MPa] P1=.3 MPa P1=.3 MPa P1=.5 MPa P1=.5 MPa P1=.7 MPa P1=.7 MPa Flow rate L/min (NR) Flow rate L/min (NR) FM4- FD4- Pressure drop [MPa] P1=.3 MPa P1=.3 MPa P1=.5 MPa P1=.5 MPa P1=.7 MPa P1=.7 MPa Pressure drop [MPa] P1=.3 MPa P1=.3 MPa P1=.5 MPa P1=.5 MPa P1=.7 MPa P1=.7 MPa Flow rate L/min (NR) Flow rate L/min (NR) 47

49 Mist Separator Series FM2- to FM4- Micro Mist Separator Series FD2- to FD4- Specific Product Precautions e sure to read this before handling. Refer to the back cover for Safety Instructions, Handling Precautions for SMC Products and the Operation Manual for F.R.L. Precautions, Design/Selection Warning 1. The standard bowl for the air filter, filter regulator, and lubricator, as well as the sight dome for the lubricator are made of polycarbonate. Do not use in an environment where they are exposed to or come in contact with organic solvents, chemicals, cutting oil, synthetic oil, alkali, and thread lock solutions. Effects of atmosphere of organic solvents and chemicals, and where these elements are likely to adhere to the euipment. Chemical data for substances causing degradation (Reference) cid lkaline Type Chemical name pplication examples Inorganic salts Chlorine solvents romatic series Ketone lcohol Oil Ester Hydrochloric acid Sulfuric acid, Phosphoric acid Chromic acid Sodium hydroxide (Caustic soda) Potash Calcium hydroxide (Slack lime) mmonia water Carbonate of soda Sodium sulfi de Sulfate of potash Sulfate of soda Carbon tetrachloride Chloroform Ethylene chloride Methylene chloride enzene Toluene Paint thinner cetone Methyl ethyl ketone Cyclohexane Ethyl alcohol IP Methyl alcohol Gasoline Kerosene Phthalic acid dimethyl Phthalic acid diethyl cetic acid cid washing liuid for metals Degreasing of metals Industrial salts Water-soluble cutting oil Polycarbonate Material Nylon Ether Methyl ether Ethyl ether rake oil additives Cutting oil mino Methyl amino rake oil additives Rubber accelerator Thread-lock fl uid Others Seawater Leak tester : Essentially safe : Some effects may occur. : Effects will occur. When the above factors are present, or there is some doubt, use a metal bowl for safety. Cleansing liuid for metals Printing ink Dilution Coatings Dry cleaning Photographic film Dry cleaning Textile industries ntifreeze dhesives Synthetic oil nti-rust additives Caution ir Supply 1. Install an air fi lter (Series F) as a pre-fi lter on the inlet side of the mist separator to prevent premature clogging. 2. Install a mist separator (Series FM) as a pre-fi lter on the inlet side of the micro mist separator to prevent premature clogging. 3. Do not install on the inlet side of the dryer as this can cause premature clogging of the element. Warning Maintenance 1. Replace the element every 2 years or when the pressure drop becomes.1 MPa, whichever comes fi rst, to prevent damage to the element. Caution Caution Design Lock button 1. Design the system so that the mist separator is installed in a pulsation-free location. The difference between internal and external pressure inside the element should be kept within.1 MPa, as exceeding this value could cause damage. Caution Mounting/djustment 1. When the bowl is installed on the mist separator (FM3-/FM4- ), or micro mist separa tor (FD3- /FD4-), install them so that the lock button lines up to the groove of the front (or the back) of the body to avoid drop or damage of the bowl. Selection 1. Do not allow air fl ow that exceeds the rated fl ow. If the air fl ow is allowed outside the range of the rated flow even momentarily, drainage and lubricant may splash at the outlet side or cause damage to the component. 2. Do not use in a low pressure application (such as a blower). n F.R.L. unit has its own minimum operating pressure depending on the euipment and is designed specifi cally to function with compressed air. If used below the minimum operating pressure, a loss of performance and malfunction can occur. Please contact SMC if an application under such conditions cannot be avoided. W L R FM / FD F ttachment W FM F FM R FR W L F RL C 48

50 Series FM2- to FM4- Series FD2- to FD4- Construction FM2- FD2- FM3- to FM4-6- FD3- to FD4-6- IN OUT IN OUT Drain Drain Component Parts No. Description Material Model Colour 1 ody luminum die-cast Replacement Parts No. Description Material FM2- to FM4-6- FD2- to FD4-6- FM2- FD2- FM3- FD3- Part no. FM4- FD4-2 Element assembly FM2 to 4 FM2P-6S FM3P-6S FM4P-6S FD2 to 4 FD2P-6S FD3P-6S FD4P-6S 3 owl seal NR C2SFP-26S C32FP-26S C42FP-26S 4 owl assembly Note) Polycarbonate C2SF- C3SF- C4SF- Note) owl seal is included. Please contact SMC regarding the supply of bowl assembly with psi and F unit display specifi cations. White FM4-6- FD

51 Mist Separator Series FM2- to FM4- Micro Mist Separator Series FD2- to FD4- Dimensions FM2- FD2- FM3- to FM4-6- FD3- to FD4-6- C J M D U Q racket (Option) V 2 x P (Port size) IN T N S R OUT C J M D U V Q racket (Option) 2 x P (Port size) IN T N S OUT C R W L F R L FR Drain Clearance for maintenance G E Drain Clearance for maintenance G F FM R pplicable model FM2- /FD2- FM3- to FM4-6-/FD3- to FD4-6- Optional/Semi-standard With auto drain (N.C.) With drain guide Metal bowl Metal bowl with drain guide With auto drain (N.O./N.C.) specifications W FM Dimensions pplicable model Optional/Semi-standard specifications M5 x.8 Metal bowl Width across flats 14 Metal bowl with drain guide 1/8 Width across flats 14 1/8 FM3- to FM4-6-/FD3- to FD4-6- Metal bowl with level gauge Metal bowl with level gauge, with drain guide With drain guide N.O.: lack N.C.: Grey Thread type/rc, G: ø1 One-touch fitting Thread type/npt: ø3/8" One-touch fitting Drain cock with barb fitting F ttachment Dimensions Width across flats 17 1/4 Width Width across across flats 17 1/4 flats 17 1/4 arb fitting applicable tubing: T64 Optional specifications Standard specifications Model racket mount With auto drain P C D E G J M N Q R S T U V FM2-/FD2-1/8, 1/ FM3-/FD3-1/4, 3/ FM4-/FD4-1/4, 3/8, 1/ FM4-6-/FD4-6- 3/ FM / FD R L Semi-standard specifications Model With barb fitting With drain guide Metal bowl Metal bowl with drain guide Metal bowl with level gauge Metal bowl with level gauge, with drain guide FM2-/FD FM3-/FD FM4-/FD FM4-6-/FD W

52 Mist Separator/FM2- to FM4-6- Micro Mist Separator/FD2- to FD4-6- Made to Order Please contact SMC for detailed dimensions, specifi cations and lead times. Drain capacity is greater than that of standard models. Long owl pplicable Model/Drain Capacity Note) Please consult with SMC for dimensions. FM FD w e r t Semi-standard Model FM2-, FD2- FM3-, FD3- FM4-, FD4- FM4-6-, FD4-6- Port size 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2 3/4 Drain capacity [cm 3 ] Pipe thread type Port size w Option (Mounting) Note 4) a owl b c d Drain port Flow direction Pressure unit 3 3 e r t X64 X64 Note 1) Drain guide is NPT1/8 (applicable to the FM2-, FD2-) and NPT1/4 (applicable to the FM3-/4-, FD3-/4-). Note 2) Drain guide is G1/8 (applicable to the FM2-, FD2-) and G1/4 (applicable to the FM3-/4-, FD3-/4-). Note 3) bracket is not assembled and supplied loose at the time of shipment. Including 2 mounting screws. Note 4) Refer to Chemical data on page 48 for chemical resistance of the bowl. Note 5) bowl guard is provided as standard euipment (polycarbonate). Note 6) bowl guard is provided as standard euipment (nylon). Note 7) Without a valve function Note 8) The combination of metal bowl: 2 is not available. Note 9) For pipe thread type: NPT. Note 1) : For pipe thread type: NPT only Semi-standard: Select one each for a to d. Option/Semi-standard symbol: When more than one specifi cation is reuired, indicate in alphanumeric order. Example) FM3-3-2R--X64 Long bowl Symbol Description ody size Rc N Note 1) NPT F Note 2) G 1 1/8 2 1/4 3 3/8 4 1/2 6 3/4 Without mounting option Note 3) With bracket Polycarbonate bowl 2 Metal bowl 6 Nylon bowl C With bowl guard Note 5) Note 5) 6C With bowl guard (Nylon bowl) Note 6) Note 6) With drain cock Drain guide 1/8 J Note 7) Drain guide 1/4 W Note 8) Drain cock with barb fitting (for ø6 x ø4 nylon tube) Flow direction: Left to right R Flow direction: Right to left Name plate and caution plate for bowl in imperial units: MPa Z Note 9) Name plate and caution plate for bowl in imperial units: psi, F Note 1) Note 1) Note 1) 51

53 Mist Separator/FM2- to FM4-6- Micro Mist Separator/FD2- to FD4-6- Made to Order Please contact SMC for detailed dimensions, specifi cations and lead times. w With Element Service Indicator Clogging status of elements can be checked visually. pplicable Model FM FD 3 3 w 3 3 e r t X2141 X2141 Note 1) Drain guide is NPT1/8 (applicable to the FM2-, FD2-) and NPT1/4 (applicable to the FM3-/4-, FD3-/4-). The auto drain port comes with ø3/8" One-touch fitting (applicable to the FM3-/4-, FD3-/4-). Note 2) Drain guide is G1/8 (applicable to the FM2-, FD2-) and G1/4 (applicable to the FM3-/4-, FD3-/4-). Note 3) bracket is not assembled and supplied loose at the time of shipment. Including 2 mounting screws Note 4) When pressure is not applied, condensate which does not start the auto drain mechanism will be left in the bowl. Releasing the residual condensate before ending operations for the day is recommended. Option/Semi-standard: Select one each for a to f. Option/Semi-standard symbol: When more than one specification is reuired, indicate in alphanumeric order. Example) FM3-3D-2R--X2141 With element service indicator special body type is reuired to mount the element service indicator. It cannot be mounted on a standard body. Symbol Description ody size w Rc Pipe thread type N Note 1) NPT F Note 2) G 1 1/8 e 2 1/4 Port size 3 3/8 4 1/2 3/4 6 a Mounting Without mounting option Note 3) With bracket r t Option Semi-standard Model FM2-, FD2- FM3-, FD3- FM4-, FD4- FM4-6-, FD4-6- Port size 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2 3/4 b Float type auto drain Note 6) c owl Without auto drain C Note 4) N.C. (Normally closed) Drain port is closed when pressure is not applied. D Note 5) N.O. (Normally open) Drain port is open when pressure is not applied. Polycarbonate bowl 2 Metal bowl 6 Nylon bowl 8 Metal bowl with level gauge C With bowl guard Note 7) 6C With bowl guard (Nylon bowl) Note 8) With drain cock Drain guide 1/8 d Drain port Note 12) J Note 9) Drain guide 1/4 W Note 13) Drain cock with barb fi tting (for ø6 x ø4 nylon tube) e f Flow direction Pressure unit Flow direction: Left to right R Flow direction: Right to left Name plate and caution plate for bowl in imperial units: MPa Z Note 1) Name plate and caution plate for bowl in imperial units: psi, F Note 11) Note 11) Note 11) Note 7) Note 8) Note 5) If the compressor is small (.75 kw, discharge fl ow is less than 1 L/min [NR]), air leakage from the drain cock may occur during start of operations. N.C. type is recommended. Note 6) Refer to Chemical data on page 48 for chemical resistance of the bowl. Note 7) bowl guard is provided as standard euipment (polycarbonate). Note 8) bowl guard is provided as standard euipment (nylon). Note 9) Without a valve function Note 1) For pipe thread type: NPT. Note 11) : For pipe thread type: NPT only Note 12) The combination of float type auto drain: C and D is not available. Note 13) The combination of metal bowl: 2 and 8 is not available. W L R FM / FD F ttachment W FM F FM R FR W L F R L C 52

54 53

55 Modular Type Regulator Series R C Regulator Series R Model Port size Options R1- M5 x.8 F RL W L R2-1/8, 1/4 racket FR R25- R3-1/4, 3/8 Round type pressure gauge F FM R R4-1/4, 3/8, 1/2 Set nut (for panel mount) W FM P.55 to 62 R4-6- 3/4 For R2- to R4-6-, panel fi tting dimensions are different from those of the current R series. F ttachment W L R FM / FD 54

56 Regulator R1- to R4- Symbol Regulator 1 2 How to order R1- R2- R3- R 3 w 3 e G r t Option/Semi-standard: Select one each for a to g. Option/Semi-standard symbol: When more than one specification is reuired, indicate in alphanumeric order. Example) R3-3G-1N- Made to Order (Refer to pages 61 and 62 for details.) w e r t Note 1) Option Semi-standard Pipe thread type a b c d e f g Port size Mounting Pressure Note 4) gauge Symbol Description ody size Metric thread (M5) Rc N NPT F G M5 M5 1 1/8 2 1/4 3 3/8 4 1/2 6 3/4 Without mounting option Note 2) With bracket H With set nut (for panel mount) Note 3) Without pressure gauge G Round type pressure gauge (without limit indicator) Round type pressure gauge (with limit indicator) M Round type pressure gauge (with colour zone) Set.5 to.7 MPa setting pressure Note 5) 1.2 to.2 MPa setting Exhaust mechanism Flow direction Knob Pressure unit Relieving type N Non-relieving type Flow direction: Left to right R Flow direction: Right to left Downward Y Upward Name plate and pressure gauge in imperial units: MPa Z Note 6) Name plate and pressure gauge in imperial units: psi Note 7) Note 7) Note 7) Note 7) Note 7) Note 1) Option, G, H, M are not assembled and supplied loose at the time of shipment. Note 2) ssembly of a bracket and set nuts Note 3) Mounting pitch is different from that of the current R2 to R4 and R2- to R4- Note 4) When the pressure gauge is attached, a 1. MPa pressure gauge will be fi tted for standard (.7 MPa) type..4 MPa pressure gauge for.2 MPa type (1. MPa pressure gauge only for the R1-). Note 5) Pressure can be set higher than the specifi cation pressure in some cases, but use pressure within the specification range. Note 6) For pipe thread type: NPT Cannot be used with M: Round pressure gauge (with colour zone). vailable by reuest for special. Note 7) : For pipe thread type: M5, NPT only 55

57 Regulator Series R1- to R4- Standard Specifications Model R1- R2- R25- R3- R4- R4-6- Port size M5 x.8 1/8, 1/4 1/4, 3/8 1/4, 3/8 1/4, 3/8, 1/2 3/4 Pressure gauge port size 1/16 Note) 1/8 Fluid ir mbient and fluid temperature 5 to 6 C (with no freezing) Proof pressure 1.5 MPa Maximum operating pressure 1. MPa Set pressure range.5 to.7 MPa Construction Relieving type Weight [kg] Note) Use a bushing (part no: ) when connecting the R1/8 pressure gauge to the Rc1/16. Options/Part No. Optional specifi cations Model R1- R2- R25- R3- R4- R4-6- racket assembly Note 1) R12P-27S R22P-27S R27P-27S R32P-27S R42P-27S R42P-27S Set nut R12P-26S R22P-26S R22P-26S R32P-26S R42P-26S R42P-26S Pressure gauge Note 2) Round type Note 2) Round type (with colour zone) Note 1) ssembly of a bracket and set nuts Note 2) in round pressure gauge part numbers indicates a pipe thread type. No indication is necessary for R; however, indicate N for NPT. Please contact SMC regarding the pipe thread type NPT and the supply of pressure gauge with psi unit display specifi cations. Note 3) Standard pressure gauge Warning Selection 1. lthough exhaust of the residual pressure to the inlet side is possible when eliminating the inlet pressure, exhaust is not possible when the set pressure is.15 MPa or less. Use the regulator with backfl ow function. Warning Standard G27-1-R1 G G to.2 MPa setting G27-1-R1 Note 3) G G Standard G L G L.2 to.2 MPa setting G L G L Maintenance 1. When using the regulator between a solenoid valve and an actuator, check the pressure gauge periodically. Sudden pressure fl uctuations may shorten the durability of the pressure gauge. digital pressure gauge is recommended for such situation or as deemed necessary. Specific Product Precautions e sure to read this before handling. Refer to the back cover for Safety Instructions, Handling Precautions for SMC Products and the Operation Manual for F.R.L. Precautions, Warning Mounting/djustment 1. Set the regulator while verifying the displayed values of the inlet and outlet pressure gauges. Turning the regulator knob excessively can cause damage to the internal parts. 2. Do not use tools on the pressure regulator knob as this may cause damage. It must be operated manually. Caution 1. e sure to unlock the knob before adjusting the pressure and lock it after setting the pressure. Failure to follow this procedure can cause damage to the knob and the outlet pressure may fluctuate. Pull the pressure regulator knob to unlock. (You can visually verify this with the orange mark that appears in the gap.) Push the pressure regulator knob to lock. When the knob is not easily locked, turn it left and right a little and then push it (when the knob is locked, the orange mark, i.e., the gap will disappear). 2. Pulsation will be generated when the difference between the inlet and the outlet pressure is large. In this case, reduce the pressure difference between the inlet and the outlet. Please consult with SMC if the pulsation problem is not resolved. W L R FM / FD F ttachment W FM F FM R FR W L F R L C 56

58 Series R1- to R4- Flow-rate Characteristics (Representative values) Condition: Inlet pressure.7 MPa R1- M5 R2- Rc1/ Outlet pressure [MPa] Outlet pressure [MPa] Flow rate L/min (NR) Flow rate L/min (NR) R25- Rc3/8 R3- Rc3/ Outlet pressure [MPa] Outlet pressure [MPa] Flow rate L/min (NR) Flow rate L/min (NR) R4- Rc1/2 R4-6- Rc3/ Outlet pressure [MPa] Outlet pressure [MPa] Flow rate L/min (NR) Flow rate L/min (NR) 57

59 Regulator Series R1- to R4- Pressure Characteristics (Representative values) R1-.3 Conditions: Inlet pressure.7 MPa, Outlet pressure.2 MPa, Flow rate 2 L/min (NR) R2-.3 C Outlet pressure [MPa] Set point Outlet pressure [MPa] Set point F R L W L R25- Outlet pressure [MPa] Inlet pressure [MPa].3.25 Set point Inlet pressure [MPa] R4-/R R3- F ttachment W FM F FM R FR FM / FD L W R Outlet pressure [MPa] Inlet pressure [MPa].3.25 Set point Inlet pressure [MPa] Outlet pressure [MPa] Set point Inlet pressure [MPa] 58

60 Series R1- to R4- Construction R1- R2- to 4-6- IN OUT IN OUT Component Parts No. Description Material Model Colour 1 ody Zinc die-cast R1- luminum die-cast R2- to R4- White 2 onnet Polyacetal R1- to R4- White Replacement Parts No. Description Material Part no. R1- R2- R25- R3- R4- R Valve assembly Stainless steel, HNR R1P-9S R22P-6S R32P-6S R42P-6S 4 Diaphragm assembly Weatherable NR R1P-15S Note) R22P-15S R32P-15S R42P-15S 5 Valve guide assembly Polyacetal R22P-5S R32P-5S R42P-5S Note) The R1- is a piston type. ssembly of a piston and a seal (KSYP-13). 59

61 Regulator Series R1- to R4- Dimensions R1- to R4-6- C J 2 x P1 (Port size) H Pressure gauge (Option) V Q C R IN OUT 2 x P2 (Pressure gauge port size) F R L W L FR S F J D M U racket (Option) N T F FM R Panel fitting dimensions W FM Y IN Z Plate thickness R1- : Max. 3.5 R2- to R25- : Max. 4 R3- to R4-6- : Max. 8 W OUT F ttachment FM / FD R Model Standard specifications Round type pressure gauge Round type pressure gauge (with colour zone) Optional specifications racket mount Panel mount P1 P2 Note) C D F J H J H J M N Q R S T U V W Y Z R1- M5 x.8 1/ M18 x ø R2-1/8, 1/4 1/ M36 x ø ø R25-1/4, 3/8 1/ M36 x ø ø R3-1/4, 3/8 1/ M45 x ø ø R4-1/4, 3/8, 1/2 1/ M52 x ø ø R4-6- 3/4 1/ M52 x ø ø Note) The dimension of is the length when the fi lter regulator knob is unlocked. 6 L W

62 Regulator/R2- to R4-6- Made to Order Please contact SMC for detailed dimensions, specifi cations and lead times..4 MPa Setting The maximum set pressure is.4 MPa. When a pressure gauge is included, the display will show a range from to.7 MPa. Specifications Proof pressure Maximum operating pressure Set pressure range pplicable Model R 3 w 3 e 1.5 MPa 1. MPa.5 to.4 MPa Model R2- R25- R3- R4- R4-6- Port size 1/8, 1/4 1/4, 3/8 1/4, 3/8 1/4, 3/8, 1/2 3/4 r t X46.4 MPa setting Option/Semi-standard: Select one each for a to f. Option/Semi-standard symbol: When more than one specification is reuired, indicate in alphanumeric order. Example) R3-3G-NR--X46 Symbol Description ody size Rc w Pipe thread type N NPT F G 1 1/8 2 1/4 e Port size 3 3/8 4 1/2 6 3/4 Without mounting option a Mounting Note 2) With bracket r H With set nut (for panel mount) Note 3) Without pressure gauge b Pressure gauge G Round type pressure gauge (with limit indicator) M Round type pressure gauge (with colour zone) Relieving type c Exhaust mechanism N Non-relieving type Flow direction: Left to right d Flow direction R Flow direction: Right to left t Downward e Knob Y Upward f Pressure unit Name plate and caution plate for bowl in imperial units: MPa Z Note 4) Name plate and caution plate for bowl in imperial units: psi Note 5) Note 5) Note 5) Note 5) Note 1) Option, G, H, M are not assembled and supplied loose at the time of shipment. Note 2) ssembly of a bracket and set nuts Note 3) Only for the R2- to 4- Note 4) For pipe thread type: NPT Cannot be used with M: Round pressure gauge (with colour zone). vailable by reuest for special. Note 5) : For pipe thread type: NPT only Note 1) Option Semi-standard 61

63 Regulator/R2- to R4-6- Made to Order Please contact SMC for detailed dimensions, specifi cations and lead times. w.85 MPa Setting The maximum set pressure is.85 MPa. When a pressure gauge is included, the display will show a range from to 1. MPa. Specifications Proof pressure Maximum operating pressure Set pressure range pplicable Model Model R2- R25- R3- R4- R4-6- Port size 1/8, 1/4 1/4, 3/8 1/4, 3/8 1/4, 3/8, 1/2 3/4 R 3 w 3 e r t X MPa setting Option/Semi-standard: Select one each for a to f. Option/Semi-standard symbol: When more than one specification is reuired, indicate in alphanumeric order. Example) R3-3G-NR--X268 Symbol Description ody size Rc w Pipe thread type N NPT F G 1 1/8 2 1/4 e Port size 3 3/8 4 1/2 6 3/4 Without mounting option a Mounting Note 2) With bracket r H With set nut (for panel mount) Note 3) Without pressure gauge b Pressure gauge G Round type pressure gauge (with limit indicator) M Round type pressure gauge (with colour zone) Relieving type c Exhaust mechanism N Non-relieving type Flow direction: Left to right d Flow direction R Flow direction: Right to left t Downward e Knob Y Upward f Pressure unit Name plate and caution plate for bowl in imperial units: MPa Z Note 4) Name plate and caution plate for bowl in imperial units: psi Note 5) Note 5) Note 5) Note 5) Note 1) Option, G, H, M are not assembled and supplied loose at the time of shipment. Note 2) ssembly of a bracket and set nuts Note 3) Only for the R2- to 4- Note 4) For pipe thread type: NPT Cannot be used with M: Round pressure gauge (with colour zone). vailable by reuest for special. Note 5) : For pipe thread type: NPT only Note 1) Option Semi-standard 1.5 MPa 1. MPa.5 to.85 MPa W L R FM / FD F ttachment W FM F FM R FR W L F R L C 62

64 63

65 Modular Type Lubricator Series L C Lubricator Series L Model Port size Option L1- M5 x.8 L2-1/8, 1/4 F RL W L L3-1/4, 3/8 L4-1/4, 3/8, 1/2 L4-6- 3/4 L5-3/4, 1 racket (Except L1-) FR F FM R P.65 to 7 L6-1 W FM W L R FM / FD F ttachment 64

66 Lubricator L1- to L6- Symbol How to Order L1- L2- L4- L 3 3 w e r t Option/Semi-standard: Select one each for a to d. Option/Semi-standard symbol: When more than one specification is reuired, indicate in alphanumeric order. Example) L3-3-3RW- Symbol Description ody size w e r t Semi-standard Pipe thread type Port size Option (Mounting) Note 2) a owl b c d Lubricant exhaust port Flow direction Pressure unit Metric thread (M5) Rc N NPT F G M5 M5 x.8 1 1/8 2 1/4 3 3/8 4 1/2 6 3/4 1 1 Without mounting option Note 1) With bracket Polycarbonate bowl 2 Metal bowl 6 Nylon bowl 8 Metal bowl with level gauge C With bowl guard Note 3) Note 3) Note 3) Note 3) 6C With bowl guard (Nylon bowl) Note 4) Note 4) Note 4) Note 4) Without drain cock 3 With drain cock 3W Note 5) Drain cock with barb fi tting Flow direction: Left to right R Flow direction: Right to left Name plate and caution plate: MPa Z Note 6) Name plate and caution plate: psi, F Note 7) Note 7) Note 7) Note 7) Note 7) Note 7) Note 1) Option is not assembled and supplied loose at the time of shipment. Note 2) Refer to Chemical data on page 68 for chemical resistance of the bowl. Note 3) bowl guard is provided as standard euipment (polycarbonate). Note 4) bowl guard is provided as standard euipment (nylon). Note 5) The combination of metal bowl: 2 and 8 is not available. Note 6) For pipe thread type: M5, NPT. Note 7) : For pipe thread type: M5, NPT only 65

67 Lubricator Series L1- to L6- Standard Specifications Model L1- L2- L3- L4- L4-6- L5- L6- Port size M5 x.8 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2 3/4 3/4, 1 1 Fluid ir mbient and fluid temperature 5 to 6 C (with no freezing) Proof pressure 1.5 MPa Maximum operating pressure 1. MPa Minimum dripping flow rate [L/min (NR)] Note) /4: 3 3/8: 4 1/4: 3 3/8: 4 1/2: Oil capacity [cm 3 ] Recommended lubricant Class 1 turbine oil (ISO VG32) owl material Polycarbonate owl guard Semi-standard (Steel) Standard (Polycarbonate) Weight [kg] Note) The fl ow rate is 5 drops or greater/min under the following conditions: Inlet pressure of.5 MPa; Class 1 turbine oil (ISO VG32); Temperature at 2 C; Oil adjustment valve fully open. For a circuit that repeatedly turns ON and OFF on the outlet side, make the adjustment so that the average air consumption per minute becomes the minimum dripping fl ow rate or more. Option/Part No. Model Optional specifications L1- L2- L3- L4- L4-6- L5- L6- racket assembly Note) F22P-5S F32P-5S F42P-5S F42P-7S F52P-5S Note) ssembly of a bracket and 2 mounting screws F FM R FR W L F R L C owl ssembly/part No. owl material Lubricant exhaust port Other Model L1- L2- L3- L4- L4-6- L5- L6- W FM Without drain cock Polycarbonate bowl With drain cock C1SL- C2SL- With bowl guard C2SL-C- C3SL- C4SL- C1SL-3- C2SL-3- With bowl guard C2SL-3C- C3SL-3- C4SL-3- Drain cock with barb fi tting With bowl guard C3SL-3W- C4SL-3W- C1SL-6- C2SL-6- Without drain cock With bowl guard C2SL-6C- C3SL-6- C4SL-6- Nylon bowl C1SL-36- C2SL-36- With drain cock With bowl guard C2SL-36C- C3SL-36- C4SL-36- Drain cock with barb fi tting With bowl guard C3SL-36W- C4SL-36W- C1SL-2- C2SL-2- C3SL-2- C4SL-2- Without drain cock With level gauge C3LL-8- C4LL-8- Metal bowl C1SL-23- C2SL-23- C3SL-23- C4SL-23- With drain cock With level gauge C3LL-38- C4LL-38- Note) owl assembly for the L2- to L6- models comes with a bowl seal. Please consult with SMC separately for psi and F unit display specifi cations. F ttachment FM / FD W L R 66

68 Series L1- to L6- Flow-rate Characteristics (Representative values) L1- M5 L2- Rc1/4 L3- Rc3/8 Pressure drop [MPa] Needle fully open Open.5 turn Open 1. turn Open 1.5 turns Open 2. turns.2 Conditions: P1 =.5 MPa Needle: One side fully open Pressure drop [MPa] P1=.1 MPa P1=.3 MPa P1=.5 MPa P1=.7 MPa Pressure drop [MPa] P1=.1 MPa P1=.3 MPa P1=.5 MPa P1=.7 MPa Flow rate L/min (NR) Flow rate L/min (NR) Flow rate L/min (NR) L4- Rc1/2 L4-6- Rc3/4 L5- Rc1 Pressure drop [MPa] P1=.1 MPa P1=.3 MPa P1=.5 MPa P1=.7 MPa Pressure drop [MPa] P1=.1 MPa P1=.3 MPa P1=.5 MPa P1=.7 MPa Pressure drop [MPa] P1=.1 MPa P1=.3 MPa P1=.5 MPa P1=.7 MPa Flow rate L/min (NR) Flow rate L/min (NR) Flow rate L/min (NR) L6- Rc1 Pressure drop [MPa] P1=.1 MPa P1=.3 MPa P1=.5 MPa P1=.7 MPa 5 1 Flow rate L/min (NR) 15 Working Principle: L1 Type Needle Section portion of the air introduced from the IN side pressurizes the lubricant inside the bowl. The remainder of the air passes through the needle o, and flows to the OUT side. The differential pressure between the inside of the bowl and the inside of the sight dome w, causes the lubricant inside the bowl into the oil passage!. The lubricant drips from the dripping tube!1, and lubricates the OUT side. The amount of lubricant is adjusted by the needle o on the front face. Turning the needle clockwise increases the amount of the lubricant, and turning it counterclockwise until fully open shuts off the lubricant. The needle on the side that is not used should be left fully open. 67

How to Order. Rc NPT 1/8 1/4 3/8 1/2

How to Order. Rc NPT 1/8 1/4 3/8 1/2 AWM 3 AWD 3 Mist Separator Regulator AWM2 to AWM4 Micro Mist Separator Regulator AWD2 to AWD4 3 E 3 E How to Order Mist Separator Regulator 1 2 Micro Mist Separator Regulator The AWM series is made up

More information

ALF400 to 900, ALT-5/-9

ALF400 to 900, ALT-5/-9 Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Auto feed lube 00 00-0 00 00 00 900 - --IS- -9 AIR : OIL : Fluid Proof pressure Air. MPa 0. MPa.0 MPa (Note ) Operating pressure differential

More information

Series ACG/ARG/AWG. Regulator with Built-in Pressure Gauge Filter Regulator with Built-in Pressure Gauge

Series ACG/ARG/AWG. Regulator with Built-in Pressure Gauge Filter Regulator with Built-in Pressure Gauge Regulator with uilt-in ressure auge ilter Regulator with uilt-in ressure auge Series /R/W - - - R- L- W- R L W V Visibility of pressure gauge is improved in various installation places When mounting on

More information

Compressed Air Cleaning Filter Series

Compressed Air Cleaning Filter Series Compressed ir Cleaning Filter Series M /FF Series For Water Droplet, Solid/Oil Separation and Deodorization Modular connection, Space-saving design, Labor-saving in piping! Uses the same spacer as the

More information

ALF400 to 900, ALT-5/-9

ALF400 to 900, ALT-5/-9 uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa 0. MPa.0 MPa (Note

More information

Modular Type Regulators

Modular Type Regulators Modular Type Regulators Series AR AC Regulator Series AR Port size Options AFARAL, 1/4 Bracket AFAR AWAL AR4-A, 1/2 Round type pressure gauge With set nut (for panel mount) AFAFMAR P.45 to 5 AR4-6-A ot

More information

Modular Air Combination Units

Modular Air Combination Units ...... 12-25 NAC1 ~ 6 series.................................. 12-16 Filter + Regulator + Lubricator NAC11 ~ 41 series.................................. 17-18 Filter/Regulator + Lubricator NAC12 ~ 62 series..................................

More information

Regulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K

Regulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K Modular Type Regulator Series R Regulator Series R Model R M5 x.8 ccessory R2 /8, /4 R /4, 3/8 R3 /4, 3/8 R4 /4, 3/8, /2 Pages 36 through 4 Regulator with back flow mechanism Series RK R4-6 R5 R6 R2K RK,

More information

Model AWG20 AWG30 AWG40 AWG20K AWG30K AWG40K

Model AWG20 AWG30 AWG40 AWG20K AWG30K AWG40K Modular Type ilter Regulator with uilt-in Pressure auge eries W ilter Regulator with uilt-in Pressure auge eries W ominal filtration rating ccessory W2 /8, /4 W3 /4, 3/8 W /4, 3/8, /2 racket Pages 424

More information

Regulator. Accessory. Description. Symbol. Nil. With bracket. B With round. Port size. (Without limit indicator) With set nut (For panel mount)

Regulator. Accessory. Description. Symbol. Nil. With bracket. B With round. Port size. (Without limit indicator) With set nut (For panel mount) eries R 2- ow to Order opper, fluorine and silicon-free + Low particle generation il hread type Rc 0 R 03 2 R 03 ody size / ith bracket Round pressure ith set nut tandard specifications odel luid roof

More information

Regulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K

Regulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K Modular Type Regulator Series R Regulator Series R Model R M5 x.8 ccessory R2 /8, /4 R /4, 3/8 R3 /4, 3/8 R4 /4, 3/8, /2 Pages 36 through 4 Regulator with back flow mechanism Series RK R4-6 R5 R6 R2K RK

More information

Filter regulator. Accessory. Description. Symbol. B With bracket With round. Port size. (Without limit indicator) Body size.

Filter regulator. Accessory. Description. Symbol. B With bracket With round. Port size. (Without limit indicator) Body size. eries ow to Order opper, fluorine and silicon-free + Low particle generation il ote 1) ote 2) part no. lean series hread type Rc racket assembly ote ) ote 9) 1.0a 0.2a / -20 49-01 49-2-01 ilter regulator

More information

Auto Feed Lube, Auto Feed Tank ALF400 to 900, ALT-5/-9

Auto Feed Lube, Auto Feed Tank ALF400 to 900, ALT-5/-9 Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Fluid Proof pressure Operating pressure differential range (Difference between tank pressure and line pressure) Vibration resistance

More information

ALF400 to 900, ALT-5/-9

ALF400 to 900, ALT-5/-9 uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa Max. operating pressure

More information

Direct Operated Precision Regulator Modular Style. Standard Specifications

Direct Operated Precision Regulator Modular Style. Standard Specifications 1 Direct Operated Precision Regulator Modular Style Series P3 Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8) 258-92-www.stevenengineering.com

More information

How to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø

How to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note

More information

Compact Regulator. ARX20 Series. 2.0 MPa compatible, piston type compact regulator ARJ

Compact Regulator. ARX20 Series. 2.0 MPa compatible, piston type compact regulator ARJ Compact Regulator 2 Series 2. MPa compatible, piston type compact regulator V SR X AP1 Compatible with inlet supply pressure of 2. MPa Employs a knob shape for easy operation Compact type (face to face

More information

Regulator: Modular Type with Back flow Mechanism. AR30K to 60K. Body size. Port size 1/4 3/8 1/2 3/4 AR40 AR50 3/4 1/2

Regulator: Modular Type with Back flow Mechanism. AR30K to 60K. Body size. Port size 1/4 3/8 1/2 3/4 AR40 AR50 3/4 1/2 Regulator: Modular Type with ack flow Mechanism R3 to 6 How to Order Regulator with a built-in mechanism that ensures a quick release of the outlet air pressure (built-in check valve with back flow mechanism).

More information

Series SFD. Clean Air Filter. Variations. Made to Order. Type. Cartridge (replaceable element) Disposable (non-replaceable element) Up to 100

Series SFD. Clean Air Filter. Variations. Made to Order. Type. Cartridge (replaceable element) Disposable (non-replaceable element) Up to 100 Clean Air Filter Variations SFD SFD SFD SFD Made to Order Type Disposable (non-replaceable element) Cartridge (replaceable element) Flow rate L/min (ANR) (at inlet pressure.7 MPa) Up to 6 Up to 8 Up to

More information

Filter Regulator 21 AW 30 K F 03 BG JN. Description. Without backflow function. Rc NPT 1/8 1/4 3/8 1/2 3/4

Filter Regulator 21 AW 30 K F 03 BG JN. Description. Without backflow function. Rc NPT 1/8 1/4 3/8 1/2 3/4 eries eries ilter Regulator ilter Regulator with ackflow unction ow to Order lean series opper, fluorine and silicon-free low particle generation ilter regulator 10 03 21 03 q w e r t y "" must always

More information

Pressure Relief 3 Port Valve New. Sonic Conductance 45% With the indicator window Step1. With locking holes

Pressure Relief 3 Port Valve New. Sonic Conductance 45% With the indicator window Step1. With locking holes Conforming to OSHA Standard Pressure Relief Port Valve New RoHS with Locking Holes Weight Max. 60% Lighter Sonic Conductance 5% C[dm/s bar] VHS0 Max. Energy Saving Up Safety Measure Zero blow-by of the

More information

Booster Regulator/Air Tank

Booster Regulator/Air Tank Booster Regulator/Air Tank Increase factory air pressure by up to 4 times! Air-only operation requires no power supply, reduces heat generation, and Boost pressure allows easy installation. NEW Renewed

More information

Related Products: Auto Drain Valve. Model/Specifications. Model

Related Products: Auto Drain Valve. Model/Specifications. Model Related Products: Auto Drain Valve /600 Drainage is automatically discharged in a reliable manner, without requiring human operators. Highly resistant to dust and corrosion, operates reliably, and a bowl

More information

Precision Regulator. Series Model Regulating pressure range Port size Page

Precision Regulator. Series Model Regulating pressure range Port size Page Precision Regulator Series // Basic Type Air Operated Type Series Model Regulating pressure range Page Series Series Series Series Series.5 to MPa. to MPa. to.8 MPa /8 55.5 to MPa. to MPa /4 55. to.8 MPa.

More information

Power Valve: Precision Regulator. High precision, large capacity relief regulator

Power Valve: Precision Regulator. High precision, large capacity relief regulator Power Valve: Precision Regulator Series VEX High precision, large capacity relief regulator port large exhaust capacity pressure reducing valve which utilizes a nozzle flapper mechanism available as air

More information

Pilot Check Valve: Metal Body Type

Pilot Check Valve: Metal Body Type INFORMATION Pilot Check Valve: Metal Body Type The use of a metal body improves strength and environmental resistance. Temporary intermediate stops are possible. *1 *1 Precise intermediate stops are not

More information

Filter-Regulator-Lubricator

Filter-Regulator-Lubricator Filter-Regulator-Lubricator 1/2" NPT Inlet/Outlet Ports PD16.19 July, 2016 Machine Parts & Operating Instructions Save This Document and Educate All Personnel WARNING Always follow the safety instructions

More information

Doc. No. AC -OMQ0008-B PRODUCT NAME AIR COMBINATION. MODEL/ Series AC10(A,B)- -A AC20(A,B,C,D)- -A AC25(B,C)- -A AC30(A,B,C,D)- -A AC40(A,B,C,D)- -A

Doc. No. AC -OMQ0008-B PRODUCT NAME AIR COMBINATION. MODEL/ Series AC10(A,B)- -A AC20(A,B,C,D)- -A AC25(B,C)- -A AC30(A,B,C,D)- -A AC40(A,B,C,D)- -A Doc. No. AC OMQ0008B PRODUCT NAME AIR COMBINATION MODEL/ Series AC10(A,B) A AC20(A,B,C,D) A AC25(B,C) A AC30(A,B,C,D) A AC40(A,B,C,D) A Contents PAGE 1. PRECAUTION FOR SAFETY 1~8 2. APPLICATION 9 3. SPECIFICATIONS...

More information

Filter-Regulator-Lubricator

Filter-Regulator-Lubricator Models: 10671-1/2" NPT Filter 10673-1/2" NPT Regulator 10675-1/2" NPT Lubricator 10677-1/2" NPT Filter-Regulator 10679-1/2" NPT Regulator-Lubricator 10681-1/2" NPT Filter-Regulator-Lubricator Parts Page

More information

Components for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly.

Components for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly. Components preparation and pressure adjustment ABP Overview ABP is a component that enables boosting by s only up to twice primary pressure (.0MPa max.) in combination with using air tank but not using

More information

LMU100/200 Series. Standard Specifications

LMU100/200 Series. Standard Specifications Mist Spray Unit MU/ Series Intermittent spray to cutting and press gear chains, etc. Standard Specifications Inlet air Oil tank set range Oil Dynamic viscosity of oil ( C) Oil tank capacity (cm ) mbient

More information

B84G - Excelon Plus Modular System General purpose filter/regulator

B84G - Excelon Plus Modular System General purpose filter/regulator > Port size: 3/8... 3/4 (ISO G/PTF) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Push to lock adjusting knob with built in tamper resistant

More information

F.R.L. Units Precautions 1 Be sure to read this before handling.

F.R.L. Units Precautions 1 Be sure to read this before handling. Precautions 1 1. Confirm the specifications. Products represented in this catalog are designed only for use in compressed air systems (including vacuum). Do not operate at pressures or temperatures, etc.,

More information

B74G - EXCELON Modular System General purpose filter/regulator

B74G - EXCELON Modular System General purpose filter/regulator > Port size: /8... / (ISO G/PTF) > Excelon design allows in-line installation or modular installation with other Excelon products > Push to lock adjusting knob with optional tamper resistant accessory

More information

B84G - Excelon Plus Modular System General purpose filter/regulator

B84G - Excelon Plus Modular System General purpose filter/regulator > Port size: 3/8" to 3/4" (PTF/ISO G) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Push to lock adjusting knob with built in tamper resistant

More information

F.R.L. Units Precautions 1 Be sure to read this before handling products.

F.R.L. Units Precautions 1 Be sure to read this before handling products. Precautions 1 1. Confirm the specifications. Products represented in this catalog are designed only for use in compressed air systems (including vacuum). Do not operate at pressures, temperatures, etc.,

More information

Clean Speed Controller with One-touch Fitting

Clean Speed Controller with One-touch Fitting Clean Speed Controller with One-touch Fitting Series -FPQ/-FPG -FPG Series -FPQ Series Speed controllers for clean room use S R -FPQ: (electroless nickel plated) and -FPG: are now available as a series.

More information

Regulator for 2 MPa ARX 20. How to Order. Bracket. Pressure gauge. Port size 1/8 1/4. Panel nut

Regulator for 2 MPa ARX 20. How to Order. Bracket. Pressure gauge. Port size 1/8 1/4. Panel nut Regulator for 2 MPa RX 2 How to Order RX2 1 Regulator 1 Regulating pressure.5 to.85mpa {.51 to 8.7kgf/cm²}.5 to.3mpa {.51 to 3.1kgf/cm²} Thread type Nil N F Rc(PT) NPT (PF) Port size 1 2 ccessories/options

More information

AMG. Model Note) Rated flow (l/min (ANR)) Port size Mass (kg) 1 8, , 3 8. Specifications Fluid. Element life

AMG. Model Note) Rated flow (l/min (ANR)) Port size Mass (kg) 1 8, , 3 8. Specifications Fluid. Element life Water Separator Series AMG Can remove water droplets in compressed air. Use this product in cases where water must be avoided, but not so dry as when an air dryer is used. Through the adoption of an element

More information

Flow Characteristics NAR1 NAR 9 6 M5X.8 NAR2 NPT 3/ Flow (scfm) NAR5 NPT 3/ Flow (scfm) Flow (

Flow Characteristics NAR1 NAR 9 6 M5X.8 NAR2 NPT 3/ Flow (scfm) NAR5 NPT 3/ Flow (scfm) Flow ( How To Order NAR 1, 2, 25,, 4, 5, 6 Regulator Body size 1 M5 2 1/8 25 1/4 3/8 4 1/2 5 3/4 6 1 NAR N 3 BG 1N Port Thread Nil Rc(PT) F G(PF) N NPT Accessories and Combinations Accessory Suffix 1 4 N R Port

More information

The plastic bowl guard does not corrode. The draining method is selectable between the push type and the auto drain type.

The plastic bowl guard does not corrode. The draining method is selectable between the push type and the auto drain type. he plastic bowl guard does not corrode. he draining method is selectable between the push type and the auto drain type. he air filter is designed for draining and removal of foreign matter. (Element: 5µm)

More information

30% (SMC comparison) Silencer. New. New. The M5 silencer is now added! The resin silencer is now a more compact size! Series AN.

30% (SMC comparison) Silencer. New. New. The M5 silencer is now added! The resin silencer is now a more compact size! Series AN. Silencer The M silencer is now added! Space saving New RoHS ctual size 6. mm mm Fingertip size The resin silencer is now a more compact size! Existing model Entire length reduced by up to 30% (SMC comparison)

More information

Clean Regulator/Fluororesin Type

Clean Regulator/Fluororesin Type Clean egulator/fluororesin Type Series Washing/ssembly Procedure Washing parts: ody, Valve diaphragm and Diaphragm Parts Degreasing washing DI water washing lcohol washing ssembly Inspection Wetted part

More information

FILTER, REGULATOR AND FILTER/REGULATOR Stainless Steel 316L Compact 1/4, High Flow 1/4-1/2

FILTER, REGULATOR AND FILTER/REGULATOR Stainless Steel 316L Compact 1/4, High Flow 1/4-1/2 FILTER, REGULATOR AND FILTER/REGULATOR Stainless Steel L Compact /, High Flow / - / Air service equipment Series FEATURES Stainless Steel filter, regulator and filter regulator intended for corrosive environment

More information

Specifications. Construction. 2 port valve/series VHK2 3 port valve/series VHK3. Component Parts. Standard style. Flame resistant style

Specifications. Construction. 2 port valve/series VHK2 3 port valve/series VHK3. Component Parts. Standard style. Flame resistant style Finger Valve SeriesVHK Large effective area: to mm 2 Small knob operating force: 0.43 to 1.4 kgfcm Poppet valve construction with few seal defects The series begins with the min. tube O.D. of. Selection

More information

Pneumatic valve islands

Pneumatic valve islands Pneumatic valve islands The MEGA solenoid air operated spool valve JOUCOMATIC offers a concept of solenoid air operated spool valves which can be fitted together to form islands. Due to its new patented

More information

CMZ Series. Combination. FRZ Series. A combination to reliably remove water is now available!! ib-cyclone FRZ Series BK-P027- Filter regulator

CMZ Series. Combination. FRZ Series. A combination to reliably remove water is now available!! ib-cyclone FRZ Series BK-P027- Filter regulator BK-P27- ib-cyclone ib-cyclone FRZ Series Combination CMZ Series Water separator using high speed cyclone method New generation fi lter regulator FRZ Series IBCY4 IBCY5 FRZ4 FRZ5 A combination to reliably

More information

IR1000-A IR1010-A IR1020-A

IR1000-A IR1010-A IR1020-A Document No. IR -OMT0020 PRODUCT NAME Precision Regulator MODEL / Series / Product Number IR1000-A IR1010-A IR1020-A Contents Safety Instructions 1 to 5 1. Application 6 2. Specifications 6 3. Construction

More information

lternative odels 3.87 (98) anual Drain 2.67 (68) 3.72 (94) utomatic Drain 2.13 (54) 1.12 (28) P1H, PTH Filter/Regulator-Lubricator Combination Units 0

lternative odels 3.87 (98) anual Drain 2.67 (68) 3.72 (94) utomatic Drain 2.13 (54) 1.12 (28) P1H, PTH Filter/Regulator-Lubricator Combination Units 0 ir line equipment P1H, PTH Filter/Regulator- Lubricator Combination Units 07 Series Compact design Filter removes liquids and solid particles down to 5 µm Push to lock adjusting knob with tamper resistant

More information

kpa or less 5.0. Compressed Air Preparation Filter. AFF/AM/AMD Series CAT.ES30-17B. 1 μm (Current model: 3 μm) 20% 60% 52% 160 mm.

kpa or less 5.0. Compressed Air Preparation Filter. AFF/AM/AMD Series CAT.ES30-17B. 1 μm (Current model: 3 μm) 20% 60% 52% 160 mm. Compressed Air Preparation Filter Compressed Air Purity Class ISO 573 Main Line Filter Series Mist Separator Series 1 μm.1 μm Water droplet removal Oil mist separation and removal Micro Mist Separator

More information

INDUSTRIAL PNEUMATICS - air treatment units. FIL filter

INDUSTRIAL PNEUMATICS - air treatment units. FIL filter Due to its metal construction, the entire range of NEW DEAL elements is resistant to heavy duty working conditions. Designed for high pressure application (up to 18 bar). FIL filter Degree of filtration:

More information

Precision Regulator. IR1000/2000/3000 Series ARJ ARX AMR ARM ARP IR -A IR IRV VEX SRH SRP SRF ITV IC ITVH ITVX PVQ VY1 AP100.

Precision Regulator. IR1000/2000/3000 Series ARJ ARX AMR ARM ARP IR -A IR IRV VEX SRH SRP SRF ITV IC ITVH ITVX PVQ VY1 AP100. Precision Regulator //3 Series Basic Type Air Operated Type Series Model Set pressure range Port size Page Series Series 3 Series 3 3 3 Series 3 Series 3.5 to MPa. to MPa. to.8 MPa /8 8.5 to MPa. to MPa.

More information

Air preparation units

Air preparation units Overview Description Page Characteristics Dimensions Order instructions Type overview unit three-piece 44, 45, 48 52 6 unit two piece 44, 45, 48 52 6 Filter-regulator 44, 45, 48 53 6 Filter-water-separator

More information

Process Pump. Series PAF3000/Series PAF5000

Process Pump. Series PAF3000/Series PAF5000 Process Pump Series 3/Series The excellent corrosion resistance is achieved due to the new PFA wetted material construction! PPS/PFA dual construction, withstand pressure and heat cycle performance have

More information

New Product. Air Consumption 70% Down. Precision Regulator Air Saving Type. RPE Series PRECISION REGULATOR RPE SERIES CC-1072A

New Product. Air Consumption 70% Down. Precision Regulator Air Saving Type. RPE Series PRECISION REGULATOR RPE SERIES CC-1072A Air Consumption 70% Down New Product Precision Regulator Air Saving Type RPE Series PRECISION REGULATOR RPE SERIES Large Air Saving CC-1072A Air Consumption 70% Down. New Type Eco-friendly Precision Regulator

More information

Process Pump Automatically Operated Type (Internal Switching Type) Air Operated Type (External Switching Type) How to Order. Option. Symbol.

Process Pump Automatically Operated Type (Internal Switching Type) Air Operated Type (External Switching Type) How to Order. Option. Symbol. Process Pump Automatically Operated Type (Internal Switching Type) Air Operated Type (External Switching Type) Series PAF3 Female threaded PAF31 3 3 Note 1) Actuation Actuation Automatically operated Note

More information

Series K Air service units G 1/8, G 1/4

Series K Air service units G 1/8, G 1/4 Air service units G /8, G /4 Series FK Filter, G /8 G /4.02 Series RK Pressure regulator, G /8 G /4.04 Series FRK Filter/regulator, G /8 G /4.06 Series OK Lubricator, G /8 G /4.08 Series FROK Two piece

More information

Regulator/Modular Style AR1000 to 6000

Regulator/Modular Style AR1000 to 6000 Regulator/Modular Style AR000 to 6000 Can be combined with a modular style air filter and lubricator A rich variety of models enables precise and stable pressure settings to meet user needs Drain cock

More information

Description Supply pressure Pressure range Connection Device Page max. bar bar thread

Description Supply pressure Pressure range Connection Device Page max. bar bar thread Pressure Regulators Supply pressure Pressure range onnection Device Page max. bar bar thread Maxi -Series, robust, interlockable 1 0. 1.8 / 17 G¼ - G1 R0, R1.0 made of plastic, also for liquids 1,5 0 4

More information

The products listed in this page are ECO-friendly products. * Please refer to page 4 for the details of ECO-friendly products. Model UAMR AD- L

The products listed in this page are ECO-friendly products. * Please refer to page 4 for the details of ECO-friendly products. Model UAMR AD- L his modular type unit offers a rich variety of combinations and features easy maintenance. Air Filter (1) (2) (3) (4) Regulator Mist Filter or Micromist Filter (5) (6) (1) ype (2) Unit combination Code

More information

Calibrated or locked versions available. TREATMENT > Series MD regulators GENERAL DATA. New

Calibrated or locked versions available. TREATMENT > Series MD regulators GENERAL DATA. New > Series MD regulators Series MD pressure regulators New Ports with interchangeable cartridges: threaded (1/8, 1/4, /8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm Versions: single,

More information

MINIATURE COMBINATION UNITS Filter/regulators and lubricators P1H - G1/8, G1/4

MINIATURE COMBINATION UNITS Filter/regulators and lubricators P1H - G1/8, G1/4 P1H INITURE COINTION UNITS ilter/regulators and lubricators P1H - 1/8, 1/4 Combinations of filterregulators and lubricators can be ordered as pre-assembled units Complete control of filtration, regulation

More information

EXH. Specifications. Descriptions. Min. working pressure MPa

EXH. Specifications. Descriptions. Min. working pressure MPa Functional explanation Primary pressure flowed from passes through check valve on side, and flows in chamber A and B. Primary pressure also passes through pressure adjustment section and switching valve,

More information

Series AS-FPQ/AS-FPG. Speed Controller with One-touch Fitting for Clean Room. Speed controllers for clean room use

Series AS-FPQ/AS-FPG. Speed Controller with One-touch Fitting for Clean Room. Speed controllers for clean room use CAT.ES20-19 A Speed Controller with One-touch Fitting for Clean Room Series AS-FPQ/AS-FPG Series AS-FPG Series AS-FPQ Speed controllers for clean room use AS-FPQ: Brass (electroless nickel plated) and

More information

VACUUM REGULATORS CONTENTS

VACUUM REGULATORS CONTENTS CAD drawing data catalog is available. ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS CONTENTS Small Regulators Features 759 Specifications, Order Codes, Flow Rate

More information

Air service units series Y G1/4 to G1

Air service units series Y G1/4 to G1 Air service units series Y Series FY Filter, 12.071 Series RY+ RYP Pressure regulator, 12.076 Series FRY Filter/regulator, 12.080 Series OY Lubricator, 12.083 Series FROY Filter, Regulator, Lubricator

More information

Specifications. Construction. 2 port valve/series VHK2 3 port valve/series VHK3. Component Parts. Standard style. Standard style

Specifications. Construction. 2 port valve/series VHK2 3 port valve/series VHK3. Component Parts. Standard style. Standard style Finger Valve eriesvhk Large effective area: to mm 2 mall knob operating force: 0.43 to 1.4 kgfcm Poppet valve construction with few seal defects The series begins with the min. tube O.D. of. election from

More information

Series ZFC. Air Suction Filter In-line Type with One-touch Fittings

Series ZFC. Air Suction Filter In-line Type with One-touch Fittings CAT.E832- A Air Suction Filter In-line Type with One-touch Fittings Series ZFC An in-line type air suction filter that prevents trouble in vacuum equipment due to contaminants in the air IN/OUT straight

More information

/ Air Line Kit AL - M1202. / OPERATION MANUAL P1 - P9 / English P11 - P19 OM-K0651

/ Air Line Kit AL - M1202. / OPERATION MANUAL P1 - P9 / English P11 - P19 OM-K0651 / Air Line Kit AL - M1202 / OPERATION MANUAL P1 - P9 / English P11 - P19 OM-K0651 002 1 Thank you for purchasing the Air Line Kit " AL - M1202 ". This Air Line Kit is designed to adjust the air supply

More information

PARTICULATE FILTER/REGULATOR

PARTICULATE FILTER/REGULATOR PRTICULTE FILTER/REGULTOR High flow with a wide range of adjustable output pressure ranges Optional low profile integrated gauge, Optional extended temperature range of -40 C to +80 C Threaded ports allow

More information

BL68 - Olympian Plus, plug-in system Filter/regulators and lubricators

BL68 - Olympian Plus, plug-in system Filter/regulators and lubricators >> Port size: 3/4... /2 (ISO G/ PTF) >> Complete air processing units pre-assembled, ready to install Technical features Medium: Compressed air only Maximum operating pressure: 7 bar (246 psi) Pressure

More information

Self-priming makes priming unnecessary Exhausts the air inside the suction pipe to suck up liquid. Air operated type.

Self-priming makes priming unnecessary Exhausts the air inside the suction pipe to suck up liquid. Air operated type. Process Pump Series 3/5 Automatically Operated Type (Internal Switching Type)/Air Operated Type (External Switching Type) High abrasion resistance and low particle generation o sliding parts in wetted

More information

IP2, IP2A and IP2D. Spirax-Monnier International Compressed Air Filter/ Regulators

IP2, IP2A and IP2D. Spirax-Monnier International Compressed Air Filter/ Regulators Page 1 of 6 TI-P510-01 H Issue 5 IP2, IP2 and IP2D ISO 9001 Spirax-Monnier International ompressed ir Filter/ Regulators ert. No. LRQ 0963008 Description The IP range of Spirax-Monnier international compressed

More information

Standard Specifications. Fluid Proof pressure Maximum operating pressure. Regulating pressure range

Standard Specifications. Fluid Proof pressure Maximum operating pressure. Regulating pressure range Manifold Regulator Series ARM000/000 connection methods Standard Specifications Fluid Proof pressure Maximum operating pressure Regulating pressure range Ambient and fluid temperature Fluid Cracking pressure

More information

Air Saving Valve. Series ASQ. Series ASR. Pressure Valve. Flow valve TMH ASD AS AS-FG AS-FP AS-FM ASP ASN AQ ASV AK VCHC ASS. r r AS-FE KE 10 0.

Air Saving Valve. Series ASQ. Series ASR. Pressure Valve. Flow valve TMH ASD AS AS-FG AS-FP AS-FM ASP ASN AQ ASV AK VCHC ASS. r r AS-FE KE 10 0. Air Saving Valve Series R Pressure Valve Series Q Flow Valve P r.9.7 2..3.1 D -FE KE -FG -FP -FM.1.2.2.3 pressure (MPa) -D -T P ow valve Fl N AQ V e n by o i t p nsum n stroke o c r i r a Cuts g the retu

More information

FILTER REGULATOR. We produce with artistic attitude.

FILTER REGULATOR. We produce with artistic attitude. FILTER REGULTOR We produce with artistic attitude. DURY from Germany is expert in fluid control; the products are mainly for control and measurement of various gases, liquid pressure and flow, including

More information

Process Pump. PAF3000 Series/PAF5000 Series

Process Pump. PAF3000 Series/PAF5000 Series Process Pump PAF3 Series/PAF Series RoHS The excellent corrosion resistance is achieved due to the new PFA wetted material construction! PPS/PFA dual construction, withstand pressure and heat cycle performance

More information

Mounting and Operating Instructions EB 8546 EN. Supply Pressure Regulator Type Fig. 1 Supply pressure regulators

Mounting and Operating Instructions EB 8546 EN. Supply Pressure Regulator Type Fig. 1 Supply pressure regulators Supply Pressure Regulator Type 4708 Type 4708-5352 on Type 3730 Positioner Type 4708-52 with filter receptacle Type 4708-6252 on Type 3372 ctuator Fig. Supply pressure regulators Mounting and Operating

More information

Airpel -FFR Overview PUB# FFRP-04R. Airpot, Airpel, and Anti-Stiction are registered trademarks of Airpot Corporation

Airpel -FFR Overview PUB# FFRP-04R. Airpot, Airpel, and Anti-Stiction are registered trademarks of Airpot Corporation Airpel -FFR Overview Airpot s pneumatic accessories and filter/regulator systems offer engineers, designers and manufacturing professionals the precise control, optimal air quality and properly sized components

More information

LUBRICATOR ASSEMBLY AND OPERATING INSTRUCTIONS

LUBRICATOR ASSEMBLY AND OPERATING INSTRUCTIONS AIR FILTER, REGULATOR AND LUBRICATOR 4035 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 004 by Harbor Freight

More information

Air preparation filter

Air preparation filter PRODUCT NAME Air preparation filter MODEL / Series / Product Number Main Line Filter Mist Separator Micro Mist Separator AFF70D, AFF80D, AFF90D AM70D, AM80D, AM90D AMD70D, AMD80D, AMD90D -1- Contents Page

More information

Air service units series K G1/8, G1/4

Air service units series K G1/8, G1/4 Air service units series K Series FK Filter 12.011 Series RK Pressure regulator 12.012 Series FRK Filter/regulator 12.013 Series OK Lubricator 12.014 Series FROK Two piece air service unit 12.015 Series

More information

Clean Gas Filter. SF Series. Cartridge Type/Disposable Type IDFA IDFB IDH ID IDG IDK AMG AFF AM AMD AMH AME AMF ZFC SF SFD LLB AD GD SFC10

Clean Gas Filter. SF Series. Cartridge Type/Disposable Type IDFA IDFB IDH ID IDG IDK AMG AFF AM AMD AMH AME AMF ZFC SF SFD LLB AD GD SFC10 Clean Gas Filter SF Series Cartridge Type/Disposable Type Disposable type SFC0 Disposable type SFB30 Cartridge type SFA0 SFA20 SFA30 HAA HAW AT IDU FS A B IDH ID IDG IDK AMG AFF AM AMD AMH AME AMF ZFC

More information

Series variation. Silencer. High damping effect and 2 types of materials. Applicable cylinder bore size (mm) Effective sectional area (mm 2 )

Series variation. Silencer. High damping effect and 2 types of materials. Applicable cylinder bore size (mm) Effective sectional area (mm 2 ) Series variation High damping effect and types of materials Model / appearance Metering valve with silencer Model no. SMW-6 SMW-8 FMS-M SMW- SMW- (R) M M /8 / /8 / / / / 6 8 Effective sectional area (mm

More information

Compressed Air Cleaning Filter Series

Compressed Air Cleaning Filter Series Compressed Air Cleaning Filter Series For Water, Solid/Oil Separation and Deodorization Modular connection, Space-saving design, Labor-saving in piping! AMG C, AFF C, AM C, AMD C AMH C, AME C, AMF C Uses

More information

Operating Manual. R280 Pressure regulator made of brass. 1. Intended Use

Operating Manual. R280 Pressure regulator made of brass. 1. Intended Use Pressure regulator made of brass Operating Manual 1. Intended Use Line or outlet pressure regulators- /reducer for Air, gases and liquids which is designed to effect reduction to a downstream pressure

More information

Standard Specifications

Standard Specifications NARM, 2 Ways of Connection Small Size Pressure Gauge ø5mm Reverse flow function available on the standard model Space Saving -B2 NARM-6A-NG Standard Specifications Fluid Proof pressure psig (MPa) Max.

More information

IP2M, IP2AM and IP2DM Monnier International Compressed Air Filter/ Regulators

IP2M, IP2AM and IP2DM Monnier International Compressed Air Filter/ Regulators L ocal regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification

More information

Air Saving Valve. Pressure Valve Flow Valve

Air Saving Valve. Pressure Valve Flow Valve Air Saving Valve Series Series Pressure Valve Flow Valve % reduction in air consumption Cuts air consumption by operating the return stroke at a reduced pressure. valve Pressure Air consumption reduction

More information

TECHNICAL DATA. Q = C v P S

TECHNICAL DATA. Q = C v P S January 6, 2012 Preaction 348a 1. Description Viking supervised Surefire Preaction Systems utilize the Viking G-6000P Valve. The small profile, lightweight, pilot operated Viking G-6000P Valve comes complete

More information

Digital Flow Switch. Series PFM7

Digital Flow Switch. Series PFM7 Compatible with rgon (r), Carbon Dioxide (CO) and the Mixed Gas (r+co) Digital Flow witch eries PFM7 Flow adjustment valve Fluid r, CO r + CO RoH -color display ee abnormal values at a glance. llows flow

More information

NEWS 66. VALVES & AIR SERVICE UNITS STEEL LINE Series

NEWS 66. VALVES & AIR SERVICE UNITS STEEL LINE Series NEWS 66 Components for Pneumatic Automation VALVES & AIR SERVICE UNITS STEEL LINE Series www.pneumaxspa.com Valves General The new Steel line valve series was created and developed specifically for the

More information

Process Pump Automatically Operated Type (Internal Switching Type) Air Operated Type (External Switching Type) How to Order

Process Pump Automatically Operated Type (Internal Switching Type) Air Operated Type (External Switching Type) How to Order Process Pump /5 Series Automatically Operated Type (Internal Switching Type)/Air Operated Type (External Switching Type) High abrasion resistance and low particle generation o sliding parts in wetted areas.

More information

Type Pressure Regulator. for increased air capacity. Fig. 1: Type Pressure Regulator. Mounting and Operating Instructions EB EN

Type Pressure Regulator. for increased air capacity. Fig. 1: Type Pressure Regulator. Mounting and Operating Instructions EB EN Type 4708-45 Pressure Regulator for increased air capacity Fig. 1: Type 4708-45 Pressure Regulator Mounting and Operating Instructions EB 8546-1 EN Edition March 2010 Definition of the signal words used

More information

Low torque Metal seal type Rotary joint

Low torque Metal seal type Rotary joint CAT.E0- A Low torque Metal seal type Rotary joint Long Life 0. to billion rotations Under SMC s life test conditions. Flexible Coupling Fixed (Body) Low rotational torque 0.00 to 0.0 N.m or less Rotary

More information

Series IRV1000/2000/3000

Series IRV1000/2000/3000 CAT.ES60-16 A Regulator Series /2000/3000 Allows adjustment of vacuum line pressure Regulator Series /2000/3000 3 sizes offered in the series Variations have been expanded to three sizes from only one

More information

E 212 E 222 Tank top mounting Connection up to G1¼ / -20 SAE Nominal flow rate up to 220 l/min / 58.1 gpm

E 212 E 222 Tank top mounting Connection up to G1¼ / -20 SAE Nominal flow rate up to 220 l/min / 58.1 gpm Return Filters E E Tank top mounting Connection up to G¼ / - SE up to l/min / 8. gpm Description pplication In the return line circuits of hydraulic systems. erformance features rotection against wear:

More information

Precision and Instrument Regulators 1/4" port size

Precision and Instrument Regulators 1/4 port size Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38

More information

List of Contents VMA. System description 2. Individual Units Pre-Filters 3. Combinations 6. Accessories and Main spare parts 6

List of Contents VMA. System description 2. Individual Units Pre-Filters 3. Combinations 6. Accessories and Main spare parts 6 List of Contents VMA System description Individual Units Pre-Filters 3 Micro-Filters Activated-Charcoal-Filters 5 Combinations Accessories and Main spare parts Service Units G 1 / Pre-Filter Micro-Filter

More information

MF2M Monnier Miniature Compressed Air Filter

MF2M Monnier Miniature Compressed Air Filter 5040050 / 2 IM-P504-02 CH Issue 2 MF2M Monnier Miniature Compressed Air Filter Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation and commissioning

More information