MET-101 Introduction to Metrology

Size: px
Start display at page:

Download "MET-101 Introduction to Metrology"

Transcription

1 Pasig city Tel: MET-101 Introduction to Metrology This 2-day course offers a basic introduction into Metrology, meant for people who are working in calibration and testing labs, maintenance services or metrological departments and as a reviewer for those who are planning to take the QualiMets Certified Calibration Technician Examination. In two days the participant will get acquainted with: - general metrology - measurement systems - calibration systems - quality systems and standards. Lectures, discussion and practical exercises. None Training Investment: PhP 10,000.00, inclusive of Date: February 28 March 1, 2014 Time: 8 am - 5 pm METROLOGY Introduction to Metrology GENERAL METROLOGY SI Units and Fundamental Constants in Metrology Introduction to Measurement Concepts MEASUREMENT SYSTEMS Basic Measurement Concepts Inspection, Measuring and Test Equipment (IMTE) Specifications CALIBRATION SYSTEMS Introduction to Laboratory Standard Calibration Procedure Calibration Personnel Roles and Responsibilities Calibration Interval Presentation of Measurement Data QUALITY SYSTEMS AND STANDARDS Flow Chart and Process Map Hazard Communication Housekeeping Basic Workplace Safety Quality Control Tools Control Charts

2 Pasig city Tel: MET-102 Guide to the Expression Uncertainty in Measurement This 1-day course offers a basic introduction into uncertainty of measurement, meant for people who are working in calibration and testing labs, maintenance services or metrological departments and as a refresher for those who are planning to take the QualiMets Certified Calibration Technician Examination. Learn the practical approach to measuring uncertainty. Understand the steps required and the accepted practices needed for accredited laboratories. Lectures, discussion and practical exercises. labindustries@yahoo.com.ph MET 101 Introduction to Metrology Training Investment: PhP 8,000.00, inclusive of Date: March 22, 2014 Time: 8 am - 5 pm METROLOGY Guide to the Expression of Uncertainty in Measurement APPLIED MATHEMATICS FOR CALIBRATION TECHNICIAN APPLIED STATISTICS FOR CALIBRATION TECHNICIAN ESTIMATION OF UNCERTAINTY OF MEASUREMENT BASED ON ISO GUIDE TO UNCERTAINTY IN MEASUREMENT Determine what factors should be considered when creating an uncertainty budget. Factors affecting Measurement Understand the way to statistically model budgets and distributions. Review uncertainty budgets. Examine international practices and practical statistics. Review and calculate specific examples for measurement uncertainty. Note: Delegates are required to bring their own scientific calculator

3 Pasig city Tel: MET-103 Understanding, Documenting and Auditing for the Requirements of ISO 17025:2005 This 1-day course is meant for people who are working in calibration and testing labs, maintenance services or metrological departments, as a refresher for those who are planning to take the QualiMets Certified Calibration Technician Examination, laboratory staff and other laboratory personnel who plan to set up their quality system to conform to international standards or who are planning to secure ISO 17025:2005 Accreditation. Lectures, discussion and practical exercises. None Training Investment: PhP 5,000.00, inclusive of Date: March 7, 2014 Time: 8 am - 5 pm METROLOGY Understanding, Documenting and Auditing for the Requirements of ISO 17025:2005 Backgrounder on ISO 17025:2005 Definition of Important Terms Management Requirements (15 Elements) with highlights on: 3.1 Management System 3.2 Document and Record Control 3.3 Corrective and Preventive Action 3.4 Internal Audit Technical Requirements (10 Elements) with detailed discussion on: 4.1 Quality Assurance Procedures 4.2 Proficiency Testing 4.3 Method Validation 4.4 Equipment Management and Calibration 4.5 Uncertainty in Measurement Documenting for ISO 17025:2005 Auditing Procedure for ISO 17025:2005

4 Pasig city Tel: MET-104 Training on Temperature Calibration This Temperature calibration training module is designed to meet ISO quality management system requirement include ISO 9001, ISO14001, ISO/TS 16949, ISO 22000, ISO/IEC17025, GMP, HACCP and other quality management systems. This module includes the evaluation of measurement uncertainty base on ISO Guide to the expression of uncertainty in measurement (GUM). Training Investment: PhP 12, inclusive of Date: April 4-5, 2014 Time: 8 am - 5 pm METROLOGY Training on Temperature Calibration Differences between various principles of thermoelectricity and resistance thermometry. Various types of thermocouples for example types K, N, T, S, J, R and their applications. Understand resistance thermometer for example PT100 and its input terminals. Step by step procedure based on ASTM E and ASTM E through comparison technique. Step by step procedure based on EURAMET cg-20 by electrical simulation of temperature indicator, recorder. Step by step procedure based on DKD R-57 for the calibration of temperature controlled enclosure. Hands on practice. Estimate uncertainty in measurement base on ISO Guide. Chemist, Engineer, Signatories of test reports & certificates, Laboratories Personnel and as a refresher for those who are planning to take the QualiMets Certified Calibration Technician Examination.

5 Pasig city Tel: MET-105 Training on Calibration of Non-automatic Weighing Instrument The course provides participants with the knowledge and skills: -to understand the principles of calibration of weighing instrument -to identify various sources of error that affect the calibration of weighing instrument. Training Investment: PhP 7,000.00, inclusive of Date: May 31, 2014 Time: 8 am - 5 pm METROLOGY Training on Calibration of Non- Automatic Weighing Instrument General Principles of Mass Measurement Air Buoyancy and Conventional Mass Effects of the Laboratory Environment Care and handling of weights Calibration of Electronic balances Balance adjustment features Reporting Calibration data Step by step procedure based on EURAMET cg-18 for the calibration of Non-Automatic Weighing Instrument. Hands on practice. Estimate uncertainty in measurement base on ISO Guide. Chemist, Engineer, Signatories of test reports & certificates, Laboratories Personnel and as a refresher for those who are planning to take the QualiMets Certified Calibration Technician Examination.

6 Pasig city Tel: MET-106 Training on Calibration of Micrometer and Caliper Participants is anticipated to acquire knowledge in caliper and micrometer calibration both digital and analog readout. JIS B7507 is adopted for the calibration of calliper and JIS B 7502 for micrometer. This module includes the evaluation of measurement uncertainty base on ISO Guide to the expression of uncertainty in measurement (GUM). Training Investment: PhP 7,000.00, inclusive of Date: July 5, 2014 Time: 8 am - 5 pm METROLOGY 106- Training on Calibration of Micrometer and Caliper Dimensional Standards (Gage Blocks: Style, Type, Class, Uses) Wringing Calibration Gage Block Usage and Handling Gage Block Selection Hands on Calibration Methods of (using supplied master Gage Blocks.) Micrometer and Caliper At the end of the course, participants are expected to: - Acquire basic knowledge in using caliper and micrometer both digital and analog - Perform calibration independently - Perform necessary calculations include uncertainty estimation based on ISO Guide. *according to the model given only+ - Able to generate ISO quality management system accepted calibration report Chemist, Engineer, Signatories of test reports & certificates, Laboratories Personnel and as a refresher for those who are planning to take the QualiMets Certified Calibration Technician Examination.

7 Pasig city Tel: MET-107 Training on Calibration of Pressure Measuring Instrument The course provide participants with the knowledge and skills: to understand the principles of operation of a variety of pressure measuring instruments, to understand the processes involved in the use and calibration of pressure equipment, to identify the various sources of error that affect pressure measurements. Training Investment: PhP 7,000.00, inclusive of Date: June 7, 2014 Time: 8 am - 5 pm METROLOGY 107 Training on Calibration of Pressure Measuring Instrument Introduction Definition of Pressure Measurement Instrument Terminology Gravitational Forces Mass and Density The Mercury Manometer Pressure Units of Measure Gauge, Absolute, and Differential Pressure Generating a Known Pressure Pressure from a Piston Dead Weight Testers Pressure Measurement Instrumentation The Mercury Manometer Revisited Gauge Pressure Measurement Differential Pressure Measurement Aneroid Barometers/Manometers Pressure Measurement Films Other Types of Pressure Measurement Instrumentation Vacuum Gauges The Pirani Gauge Ionization Gauges Safety Issues Hazardous Materials (such as mercury) Physical Hazards Electrical Hazards Calibration of Pressure Instrument At the end of the course, participants are expected to: - Acquire basic knowledge in calibration of pressure gauge both hydraulic and pneumatic - Perform necessary calculations include uncertainty estimation based on ISO Guide. - Able to generate ISO quality management system accepted calibration report Chemist, Engineer, Signatories of test reports & certificates, Laboratories Personnel and as a refresher for those who are planning to take the QualiMets Certified Calibration Technician Examination.

8 Pasig city Tel: MET-108 Training on Calibration of Multimeter This calibration training module is designed to meet ISO quality management system requirement include ISO 9001, ISO14001, ISO/ TS 16949, ISO/IEC and other quality management systems requiring multimeter calibration. Participant is anticipated to acquire knowledge and have hands on practical experience in multimeter calibration according to EURAMET-cg15. labindustriesyahoo.com.ph Training Investment: PhP 10,000.00, inclusive of meals, training materials and training certificates. Date: May 10, 2014 Time: 8 am - 5 pm METROLOGY 108 Training on Calibration of Multimeter Calibration of Digital Multimeter with differences ranges Standard used Environment condition Pre calibration inspection Calibration procedure DC voltage calibration AC voltage calibration Resistance calibration DC current calibration AC current calibration Measurement uncertainty calculation At the end of the course, participants are expected to: - Acquire basic knowledge in calibration of Multimeter - Perform necessary calculations include uncertainty estimation based on ISO Guide. - Able to generate ISO quality management system accepted calibration report Chemist, Engineer, Signatories of test reports & certificates, Laboratories Personnel and as a refresher for those who are planning to take the QualiMets Certified Calibration Technician Examination.

9 Pasig city Tel: MET-109 Training on Calibration of Volumetric Glassware This calibration training module is designed to meet ISO quality management system requirement include ISO 9001, ISO14001, ISO/TS 16949, ISO 22000, ISO/IEC 17025, GMP, HACCP and other quality management systems. Participant is anticipated to acquire knowledge in calibrating volumetric glassware, micro pipette, burette according to ISO/TR This module includes the evaluation of measurement uncertainty base on ISO Guide to the expression of uncertainty in measurement (GUM). Training Investment: PhP 7, inclusive of meals, training materials and training certificates. Date: March 14, 2014 Time: 8 am - 5 pm METROLOGY 109 Training on Calibration of Volumetric Glassware Calibration of volumetric glassware by weighing the quantity of water delivered:- Basis of test (ISO/TR (2000) Environment condition Material and apparatus use Calibration procedure Correct method of handling & maintenance Measurement uncertainty evaluation At the end of the course, participants are expected to: - Acquire basic knowledge in calibration of Volumetric glasswares - Perform necessary calculations include uncertainty estimation based on ISO Guide. - Able to generate ISO quality management system accepted calibration report Chemist, Engineer, Signatories of test reports & certificates, Laboratories Personnel and as a refresher for those who are planning to take the QualiMets Certified Calibration Technician Examination.

2014 Programme of Training Courses in Measurement & Calibration

2014 Programme of Training Courses in Measurement & Calibration 2014 Programme of Training Courses in Measurement & Calibration NSAI National Metrology Laboratory offers public courses to help individuals gain the skills that they require in the field of Measurement

More information

GMC-I Service GmbH Calibration Center

GMC-I Service GmbH Calibration Center 2016 GMC-I Service GmbH Calibration Center DAkkS, ISO & Factorycalibration www.gmci-service.com From spare parts, reparation, rental service, maintenance of industrial health and safety standards, calibration

More information

CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF PRESSURE METROLOGY

CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF PRESSURE METROLOGY CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF PRESSURE METROLOGY Approved By: Chief Executive Officer: Ron Josias Senior Manager: Mpho Phaloane Revised By: Specialist Technical Committee Date of

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 8655-4 First edition 2002-09-15 Piston-operated volumetric apparatus Part 4: Dilutors Appareils volumétriques à piston Partie 4: Diluteurs Reference number ISO 8655-4:2002(E)

More information

Pressure Measurements

Pressure Measurements ME 22.302 Mechanical Lab I Pressure Measurements Dr. Peter Avitabile University of Massachusetts Lowell Pressure - 122601-1 Copyright 2001 A transducer is a device that converts some mechanical quantity

More information

K V A L I F I K. Our accreditation number: NAH /2015. Valid to:

K V A L I F I K. Our accreditation number: NAH /2015. Valid to: KVALIFIK Ltd. has founded in 1991. In 1993 our calibration laboratory has get the accredited status and we have calibrated standards for the generally used physical parameters. Our standards are traceable

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Antibus Scales & Systems, Inc. 1919 Research

More information

ISO Vacuum gauges Calibration by direct comparison with a reference gauge

ISO Vacuum gauges Calibration by direct comparison with a reference gauge INTERNATIONAL STANDARD ISO 3567 First edition 2011-12-15 Vacuum gauges Calibration by direct comparison with a reference gauge Manomètres Étalonnage par comparaison directe avec un manomètre de référence

More information

Measurement And Control Appreciation

Measurement And Control Appreciation Measurement And Control Appreciation Course Content Aim To provide an appreciation of the operation and application of process plant instrumentation used for the measurement and display of the main process

More information

UKAS Accredited Electrical & Mechanical Calibration Services (Laboratory and On-site)

UKAS Accredited Electrical & Mechanical Calibration Services (Laboratory and On-site) 0720 UKAS Accredited Electrical & Mechanical Calibration Services (Laboratory and On-site) Aerospace/Defence Rail Automotive Packaging Pharmaceutical/Medical Catering Petrochemical/Oil & Gas Rhopoint Metrology

More information

Vaisala Pressure, RH & Temp. Transmitter. The instrument was operational upon receipt. The instrument was adjusted and calibrated.

Vaisala Pressure, RH & Temp. Transmitter. The instrument was operational upon receipt. The instrument was adjusted and calibrated. Asset #: 123 Calibration - Certificate No: 2083.01 Customer: Condition: Action Taken: Sample Inc. 123 Sample Rd. Sample, MA 01234 The instrument was operational upon receipt. The instrument was adjusted

More information

Supersedes: The copy of this document located on Measurement Canada s website is considered to be the controlled copy.

Supersedes: The copy of this document located on Measurement Canada s website is considered to be the controlled copy. Bulletin Category: GAS Bulletin: G-23 Page: 1 of 7 The copy of this document located on Measurement Canada s website is considered to be the controlled copy. Recognition of data from specialty gas suppliers

More information

Traceable calibration of automatic weighing instruments in dynamic operation

Traceable calibration of automatic weighing instruments in dynamic operation Traceable calibration of automatic weighing instruments in dynamic operation Matej Grum* Metrology Institute of the Republic of Slovenia, Grudnovo nabrežje 17, 1000 Ljubljana, Slovenia Abstract. The article

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 APPLIED TEST SYSTEMS 154 East Brook Lane Butler, PA 16002 Rob Carroll Phone: 724 283 1212 CALIBRATION Valid To: February 29, 2020 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 FIRSTENERGY BETA LABORATORY 6670 Beta Drive Mayfield Village, OH 44143 William Coll Phone: 440 604 9889 CALIBRATION Valid To: November

More information

THE USE OF Z FACTORS IN GRAVIMETRIC VOLUME MEASUREMENTS

THE USE OF Z FACTORS IN GRAVIMETRIC VOLUME MEASUREMENTS THE USE OF Z FACTORS IN GRAVIMETRIC VOLUME MEASUREMENTS Author: T. Mautjana NMISA Private Bag X 34 Lynwood Ridge; 0040 Email: tmautjana@nmisa.org Phone: 012 841 4798; Fax: 012 841 2131 Abstract Using gravimetric

More information

Buoyancy Does it Matter?

Buoyancy Does it Matter? Buoyancy Does it Matter? Speaker / Author: N.J. Tayler SANAS Private Bag X23, Sunnyside, 0132, South Africa e-mail : nevillet@sanas.co.za Phone: 012 394 3782 Fax: 012 394 4782 Abstract There is often the

More information

Beamex. Calibration White Paper. Weighing scale calibration - How to calibrate weighing instruments

Beamex. Calibration White Paper.  Weighing scale calibration - How to calibrate weighing instruments Beamex Calibration White Paper info@beamex.com Weighing scale calibration - How to calibrate weighing instruments Weighing scale calibration - How to calibrate weighing instruments Weighing scales, weighing

More information

CALIBRATION SERVICES HUMIDITY DEW POINT AIR VELOCITY MASS FLOW TEMPERATURE CO 2 PRESSURE. (+34)

CALIBRATION SERVICES HUMIDITY DEW POINT AIR VELOCITY MASS FLOW TEMPERATURE CO 2 PRESSURE. (+34) CALIBRATION SERVICES HUMIDITY DEW POINT AIR VELOCITY MASS FLOW TEMPERATURE CO 2 PRESSURE (+34) 968 162 005 www.sensovant.com comercial@sensovant.com www.epluse.com CALIBRATION AT THE HIGHEST LEVEL The

More information

UKAS calibration laboratory 8809 Temperature, pressure and electrical signals calibration guide

UKAS calibration laboratory 8809 Temperature, pressure and electrical signals calibration guide ABB MEASUREMENT & ANALYTICS PRODUCT GUIDE PG/SMD140 EN REV. B UKAS calibration laboratory 8809 Temperature, pressure and electrical signals calibration guide Measurement made easy UKAS calibration laboratory

More information

GUIDANCE FOR THE APPLICATION OF EQUIPMENT CALIBRATION AND TRACEABILITY OF MEASUREMENTS ON INSPECTION BODIES

GUIDANCE FOR THE APPLICATION OF EQUIPMENT CALIBRATION AND TRACEABILITY OF MEASUREMENTS ON INSPECTION BODIES GUIDANCE FOR THE APPLICATION OF EQUIPMENT CALIBRATION AND TRACEABILITY OF MEASUREMENTS ON INSPECTION BODIES ESYD G-DIAKRIB/01/01/26-03-2015 1/6 ESYD G-DIAKRIB Issue: 01 Revision: 01 Issue Date: 28-11-2007

More information

Accredited Laboratory

Accredited Laboratory Accredited Laboratory A2LA has accredited CAL-RITE CORPORATION Naperville, IL for technical competence in the field of Calibration This laboratory is accredited in accordance with the recognized International

More information

Field Instrumentation Training Strategy

Field Instrumentation Training Strategy Field Instrumentation Training Strategy 21 st Nico Marneweck 082 883 2652 Kallie Bodenstein 083 226 2787 Marco Coccioni 072 409 5779-1 - Introduction Training customised for the South Africa Industrial

More information

Recommended Practices for Calibration Laboratories

Recommended Practices for Calibration Laboratories Recommended Practices for Calibration Laboratories May 1999 General This document recommends environmental practices and documentary and operational protocols for calibration laboratories that provide

More information

EN ISO/IEC Technical Requirements

EN ISO/IEC Technical Requirements EN ISO/IEC 17025 - Technical Requirements Wolfgang Garche Environmental Protection Agency Department Air Quality Monitoring, Information, Assessment 1 What means accreditation in accordance to EN ISO/IEC

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CORPORATE CONSULTING, SERVICE, & INSTRUMENTS, INC. University Park, 221 Beaver Street Akron, OH 44304 Michael Kent Warner Phone: 330 376 3600 CALIBRATION Valid

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CAPSTONE CALIBRATION 7016 Baker Blvd Richland Hills, TX 76118 Jon T. Cappa Phone: 817 284 2707 CALIBRATION Valid To: January 31, 2020

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 APPLIED TEST SYSTEMS 154 East Brook Lane Butler, PA 16002 Rob Carroll Phone: 724 283 1212 CALIBRATION Valid To: March 31, 2018 Certificate

More information

SEMEM3-78 Testing and calibrating instrumentation and control equipment and circuits

SEMEM3-78 Testing and calibrating instrumentation and control equipment and circuits Testing and calibrating instrumentation and control equipment and Overview This unit identifies the competences you need to carry out tests and calibration of instrumentation and control equipment and,

More information

Transferpette. Testing Instructions (SOP) 1. Introduction. May 2009

Transferpette. Testing Instructions (SOP) 1. Introduction. May 2009 Transferpette Testing Instructions (SOP) May 2009 1. Introduction The standards DIN EN ISO 8655 describe both the design and the testing of the piston operated pipette Transferpette. The following Testing

More information

Interlaboratory comparison in the pressure range from 0 to 2 MPa for accredited calibration laboratories

Interlaboratory comparison in the pressure range from 0 to 2 MPa for accredited calibration laboratories Int. J. Metrol. Qual. Eng. 6, 307 (2015) c EDP Sciences 2015 DOI: 10.1051/ijmqe/2015021 Interlaboratory comparison in the pressure range from 0 to 2 MPa for accredited calibration laboratories Lovorka

More information

tradition. knowledge. responsibility. CALIBRATION OF ELECTRICAL MEASUREMENT EQUIPMENT CALIBRATION LABORATORY

tradition. knowledge. responsibility. CALIBRATION OF ELECTRICAL MEASUREMENT EQUIPMENT CALIBRATION LABORATORY tradition. knowledge. responsibility. CALIBRATION OF ELECTRICAL MEASUREMENT EQUIPMENT CALIBRATION LABORATORY www.koncar-institut.com Calibration of electrical measurement equipment - Calibration laboratory

More information

Chapter Pipette service & maintenance. Pipette specifications according to ISO Repair in the lab or return for service?

Chapter Pipette service & maintenance. Pipette specifications according to ISO Repair in the lab or return for service? Pipette specifications according to ISO 8655 Chapter 5 5.1 The ISO 8655 standard gives the accuracy and precision limits as both absolute and relative values. Specifications will depend on the technique

More information

Equipment Accuracy / Selection

Equipment Accuracy / Selection Revision 5.0: Included the PPP program for clarification. Revision 6.0: Update references for CTL PDSH 251B to CTL DSH 251E" Added leakage current tolerances for values above 5KHz For Client Labs Purpose

More information

Transferpette -8/-12

Transferpette -8/-12 Transferpette -8/-12 Testing Instructions (SOP) May 2009 1. Introduction The standard DIN EN ISO 8655 describes both the design and the testing of the piston operated pipette Transferpette 8/ 12. The following

More information

General European OMCL Network (GEON) QUALITY MANAGEMENT DOCUMENT

General European OMCL Network (GEON) QUALITY MANAGEMENT DOCUMENT General European OMCL Network (GEON) QUALITY MANAGEMENT DOCUMENT PA/PH/OMCL (09) 64 R5 QUALIFICATION OF EQUIPMENT ANNEX 6: QUALIFICATION OF PISTON PIPETTES Full document title and reference Document type

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z CALIBRATION

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z CALIBRATION SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 ROBB PRECISION TOOL SERVICES, INC. 2100 196th St SW, Suite 144 Lynnwood, WA 98036 Robert Robb Phone: 425 672

More information

APPENDIX 1. PART 10: Leak Detection Inspector, Level 1, 2 and 3 CERTIFICATION SCHEME FOR PERSONNEL. 3 rd Edition, February 2016

APPENDIX 1. PART 10: Leak Detection Inspector, Level 1, 2 and 3 CERTIFICATION SCHEME FOR PERSONNEL. 3 rd Edition, February 2016 CERTIFICATION SCHEME FOR PERSONNEL Document No. CSWIP-ISO-NDT-11/93-R Requirements for the Certification of Personnel Engaged in Non- Destructive Testing in accordance with the requirements of BS EN ISO

More information

Yokogawa Systems and PCI Training

Yokogawa Systems and PCI Training Yokogawa Systems and PCI Training 09 th December 2014 Nico Marneweck 082 883 2652 Kallie Bodenstein 083 226 2787 Marco Coccioni 072 409 5779-1 - Introduction Training customised for the South Africa Industrial

More information

FPG8601 Force Balanced Piston Gauge

FPG8601 Force Balanced Piston Gauge FPG8601 Force Balanced Piston Gauge Reference Level Calibration System for very low pressure Pressure range: 0 to 15 kpa gauge, absolute and absolute differential Standard resolution: 0.010 Pa, high resolution

More information

Service ISO17025 explained

Service ISO17025 explained ABB MEASUREMENT & ANALYTICS ARTICLE Service ISO17025 explained The ISO17025 standard covers any organization offering testing and calibration services Measurement made easy Accredited laboratory for testing

More information

Title: INSTRUMENT AND EQUIPMENT DOCUMENTATION AND RECORDS

Title: INSTRUMENT AND EQUIPMENT DOCUMENTATION AND RECORDS Page 1 of 7 Sections Included in this Document and Document History 1. Purpose 2. Scope 3. Responsibilities 4. Background 5. References/(Deleted date) 6. Procedure 7. Definitions 8. Records 9. Supporting

More information

Guide No. 2/2009. Design, training and equipment Martin Firlus. Physikalisch Technische Bundesanstalt Braunschweig und Berlin

Guide No. 2/2009. Design, training and equipment Martin Firlus. Physikalisch Technische Bundesanstalt Braunschweig und Berlin Guide No. 2/2009 THE ROAD TO a mass laboratory Design, training and equipment Martin Firlus Physikalisch Technische Bundesanstalt Braunschweig und Berlin Imprint Published by: Responsible: Text: Layout:

More information

IE011: Process Control & Instrumentation Technology

IE011: Process Control & Instrumentation Technology IE011: Process Control & Instrumentation Technology IE011 Rev.001 CMCT COURSE OUTLINE Page 1 of 8 Training Description: This intensive course covers fundamental and practical of instrumentation measurements

More information

INFLUENCE OF MEASURING PROCESS AUTOMATION ON UNCERTAINTY OF MASS STANDARD AND WEIGHTS CALIBRATION.

INFLUENCE OF MEASURING PROCESS AUTOMATION ON UNCERTAINTY OF MASS STANDARD AND WEIGHTS CALIBRATION. Andrzej Hantz RADWAG BALANCES AND SCALES INFLUENCE OF MEASURING PROCESS AUTOMATION ON UNCERTAINTY OF MASS STANDARD AND WEIGHTS CALIBRATION. The article presents the influence of comparison process automatization

More information

AGILENT TURBOMOLECULAR PUMPS MEASUREMENT METHODOLOGY

AGILENT TURBOMOLECULAR PUMPS MEASUREMENT METHODOLOGY AGILENT TURBOMOLECULAR PUMPS MEASUREMENT METHODOLOGY Agilent Vacuum Products: Our Committment to Quality Agilent s commitment to quality and Measurement s philosophy Reference Standards (PNEUROP, ISO)

More information

Pressure Metrology in Mexico

Pressure Metrology in Mexico Pressure Metrology in Mexico Jorge C. TORRES G., Benjamin SORIANO C. and Victor ARANDA C. Centro Nacional de Metrologia-CENAM km 4,5 Carretera a Los Cues, El Marques, Queretaro, MEXICO e-mail: jorge.torres@cenam.mx

More information

Requirements for the certification of movements and mechanical watches resistant to magnetic fields of 1.5 T ( G)

Requirements for the certification of movements and mechanical watches resistant to magnetic fields of 1.5 T ( G) Institut fédéral de métrologie METAS METAS-N001/EN Requirements for the certification of movements and mechanical watches resistant to magnetic fields of 1.5 T (15 000 G) This document is a translation

More information

General Accreditation Guidance. General Equipment - Calibration and Checks, General Equipment Table

General Accreditation Guidance. General Equipment - Calibration and Checks, General Equipment Table General Accreditation Guidance General Equipment - and Checks, General Equipment Table January 2018 Copyright National Association of Testing Authorities, Australia 2013 This publication is protected by

More information

IE068: Process Instrumentation Technology

IE068: Process Instrumentation Technology IE068: Process Instrumentation Technology IE068 Rev.002 CMCT COURSE OUTLINE Page 1 of 8 Training Description: This course covers fundamental and practical of instrumentation measurements including Flow

More information

I N N O V A T I O N C O N T I N U E S... International Patent Filed in 45 Leading Countries

I N N O V A T I O N C O N T I N U E S... International Patent Filed in 45 Leading Countries I N N O V A T I O N C O N T I N U E S... Quick Check International Patent Filed in 45 Leading Countries World's First Single Piece Multi-Function Check Standard for Calibration or Verification of Various

More information

PERFORMANCE TEST INSTRUCTIONS FOR BIOHIT PROLINE PIPETTORS

PERFORMANCE TEST INSTRUCTIONS FOR BIOHIT PROLINE PIPETTORS PERFORMANCE TEST INSTRUCTIONS FOR BIOHIT PROLINE PIPETTORS VER3150999 1 Content: 1.0 Introduction...2 2.0 Existing standards....3 3.0 Biohit gravimetric test process, flow chart 4 4.0 The Calibration Service.

More information

Recording Significant Figures

Recording Significant Figures Recording Significant Figures Having the correct significant figures in your lab reports begins with recording the correct significant figures from the data you obtain in lab. This packet will demonstrate

More information

Pressure is our Business

Pressure is our Business Pressure is our Business Count on gauges and calibrators that perform Wherever you work Reduce Measurement Error Protect against diminished accuracy from environmental conditions, accidental damage, and

More information

Pressure Measurement

Pressure Measurement Pressure Measurement Manometers Sensors, Transducers Ashish J. Modi Lecturer, Dept. of Mech.Engg., Shri S.V.M. inst. Of Technology, Bharuch Pressure Pressure is a force per unit area exerted by a fluid

More information

P3000 Deadweight Tester Setup, Part 1: Limited Partial Correction Method

P3000 Deadweight Tester Setup, Part 1: Limited Partial Correction Method P3000 Deadweight Tester Setup, Part 1: Limited Partial Correction Method 19 May 2014 M. Daniels This tutorial is for configuring a P3000 series (Pressurements) deadweight tester to be used with COMPASS

More information

Accreditation of laboratories for the performance evaluation of CMMs according to the ISO

Accreditation of laboratories for the performance evaluation of CMMs according to the ISO Accreditation of laboratories for the performance evaluation of CMMs according to the ISO 10360-2 A. Balsamo a, R. Mugno b, E. Audrito a, D. Corona a, G.E. D'Errico a, P. Pedone a INRIM Italian National

More information

Gas mixtures. Individual solutions specifically for your application

Gas mixtures. Individual solutions specifically for your application Gas mixtures Individual solutions specifically for your application For many applications besides pure gases also defined gas mixtures are required. For many routine applications, from operating gases

More information

Calibrators. JOFRA calibrators. Product Selection Guide. - because calibration is a matter of confidence

Calibrators. JOFRA calibrators. Product Selection Guide. - because calibration is a matter of confidence Calibrators Product Selection Guide JOFRA calibrators - because calibration is a matter of confidence AMETEK Calibration Instruments AMETEK Calibration Instruments is one of the world s leading manufacturers

More information

JOS 15 JOS 25 JOS 40. Manual and semiautomatic test benches from DN 25 to DN 40. Characteristics. Basic characteristics. Test bench using balances

JOS 15 JOS 25 JOS 40. Manual and semiautomatic test benches from DN 25 to DN 40. Characteristics. Basic characteristics. Test bench using balances TEST BENCHES JOS 15 JOS 25 JOS 40 Manual and semiautomatic test benches from DN 25 to DN 40 02 Characteristics Compact test benches - all in one room Designation - for residential and apartment meters

More information

TRAINING FIELD MEASUREMENT PERSONNEL. Russel W. Treat. Gas Certification Institute, LLC P.O. Box Houston, Texas

TRAINING FIELD MEASUREMENT PERSONNEL. Russel W. Treat. Gas Certification Institute, LLC P.O. Box Houston, Texas TRAINING FIELD MEASUREMENT PERSONNEL Russel W. Treat Gas Certification Institute, LLC P.O. Box 131525 Houston, Texas 77219-1525 INTRODUCTION Technology in the field of gas measurement and control is constantly

More information

Calibrating a Micropipette

Calibrating a Micropipette Calibrating a Micropipette Martin de Groot Kelvin Training This paper discusses the calibration of pipette, with particular attention to the type that is used and calibrated most frequently. This is the

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORYACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Reynosa, Tamaulipas, México CP. 88650 (Hereinafter

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: 12100 West 6 th Avenue, Lakewood, CO 80225 (Hereinafter

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 LEDFORD GAGE LAB, INC. 227 Industrial Dr. Mulvane, KS 67110 Blaine Johnson Phone: 316 777 9300 CALIBRATION Valid To: December 31, 2019

More information

CERTIFICATE on measurement instruments type approval

CERTIFICATE on measurement instruments type approval FEDERAL AGENCY FOR TECHNICAL REGULATION AND METROLOGY CERTIFICATE on measurement instruments type approval Valid to July 9th, 07 CH.C.9.004.А No. 4765 MEASUREMENT INSTRUMENTS TYPE NAME Mass flowmeter Promass

More information

Pressure Measurement Unit HEMP

Pressure Measurement Unit HEMP Pressure Measurement Unit HEMP Engineering and Technical Teaching Equipment INTRODUCTION Pressure measurements are the most important measurements in industry; especially in continuous processes industries,

More information

Engineering: Measurement Technology Pressure/Level (SCQF level 6)

Engineering: Measurement Technology Pressure/Level (SCQF level 6) National Unit Specification: general information CODE F5KT 12 SUMMARY This Unit can be delivered as part of a National Qualification Group Award but can also be taken as a free-standing Unit. This Unit

More information

Specific Accreditation Criteria Calibration ISO IEC Annex. Mass and related quantities

Specific Accreditation Criteria Calibration ISO IEC Annex. Mass and related quantities Specific Accreditation Criteria Calibration ISO IEC 17025 Annex Mass and related quantities January 2018 Copyright National Association of Testing Authorities, Australia 2014 This publication is protected

More information

Dead-weight tester High-pressure version Model CPB3800HP

Dead-weight tester High-pressure version Model CPB3800HP Calibration Dead-weight tester High-pressure version Model CPB3800HP WIKA data sheet CT 31.07 for further approvals see page 5 Applications Primary standard for calibrating the pressure scale in a hydraulic

More information

Simple Measurements & Buoyancy Force

Simple Measurements & Buoyancy Force Simple Measurements & Buoyancy Force 1 st year physics laboratories University of Ottawa https://uottawa.brightspace.com/d2l/home SIMPLE MEASUREMENTS The TA will go over the following tutorials. Error

More information

TG GUIDELINES CONCERNING CALIBRATION INTERVALS AND RECALIBRATION

TG GUIDELINES CONCERNING CALIBRATION INTERVALS AND RECALIBRATION GUIDELINES CONCERNING CALIBRATION INTERVALS AND RECALIBRATION Approved By: Senior Manager: Mpho Phaloane Revised By: Field Manager: Neville Tayler Date of Approval: 2015-08-26 Date of Implementation: 2015-08-26

More information

Pneumatic dead-weight tester Model CPB3500

Pneumatic dead-weight tester Model CPB3500 Calibration technology Pneumatic dead-weight tester Model CPB3500 WIKA data sheet CT 31.22 Applications Primary standard for calibrating the scale in a pneumatic range from -1... 120 bar / -14.5... 1,600

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: UNEX/HYTORC, 333 Route 17 North, Mahwah, NJ 07430

More information

PRESSURE TRANSDUCERS WITH UNIFIED (4-20) ma OR (10-50) ma OUTPUT SIGNAL

PRESSURE TRANSDUCERS WITH UNIFIED (4-20) ma OR (10-50) ma OUTPUT SIGNAL PRESSURE TRANSDUCERS WITH UNIFIED (4-0) ma OR (10-50) ma OUTPUT SIGNAL 4 th Draft OIML Recommendation TC10-SC1 English version 4.0 Prepared by: Mgr. Jiří Tesař, PhD., Mgr. Dominik Pražák Pressure Department

More information

Establishing Primary Gas Pressure Standard facility (0.140 to 70) bar Gas Piston Gauge at FCRI and its applications

Establishing Primary Gas Pressure Standard facility (0.140 to 70) bar Gas Piston Gauge at FCRI and its applications flotek.g 2017 Innovative Solutions In Flow Measurement & Control - Oil, Water, Gas August 28-30, 2017, FCRI, Palakkad, Kerala, India. Establishing Primary Gas Pressure Standard facility (0.140 to 70) bar

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z TROXLER ELECTRONICS LABORATORIES, INC. James Pratt Phone:

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z TROXLER ELECTRONICS LABORATORIES, INC. James Pratt Phone: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 TROXLER ELECTRONICS LABORATORIES, INC. James Pratt Phone: 919 314 2707 CALIBRATION Valid To: See Footnote 5 Certificate Number: 3260.01

More information

JCSS accredited laboratory Endress+Hauser Japan

JCSS accredited laboratory Endress+Hauser Japan JCSS accredited laboratory Endress+Hauser Japan ISO 17025 Global flow calibration Slide 1 Contents Overview of Endress+Hauser Global calibration concept Calibration service in Japan Slide 2 Overview of

More information

SIM MWG7 Mass and Related Quantities. Report to CCM

SIM MWG7 Mass and Related Quantities. Report to CCM SIM MWG7 Mass and Related Quantities Report to CCM SIM Sistema Interamericano de Metrología A very extended RMO Distance NRC (Ottawa) LATU (Montevideo) > 9100 km Some conparisons have to be organized by

More information

Gas Network Craftsperson

Gas Network Craftsperson Gas Network Craftsperson Unit EIAU016 Carrying out Fault Diagnosis on Electrical Equipment and Circuits This assessment specification has been developed as part of the network maintenance craftsperson

More information

CALIBRATION AND TRACEABILITY: ITS IMPORTANCE IN THE GAS INDUSTRY

CALIBRATION AND TRACEABILITY: ITS IMPORTANCE IN THE GAS INDUSTRY ICAST 2000 edited by Wan Ramli Wan Daud et. al 1079 Faculty of Engineering, Universiti Kebangsaan Malaysia CALIBRATION AND TRACEABILITY: ITS IMPORTANCE IN THE GAS INDUSTRY Rahmat Mohsin, Zulkifli Abdul

More information

Performance Overview calibration Laboratory EP Instruments Messtechnik und Kalibrierung GmbH

Performance Overview calibration Laboratory EP Instruments Messtechnik und Kalibrierung GmbH Performance Overview calibration Laboratory EP Instruments Messtechnik und Kalibrierung GmbH 1 D-K-15143-01-00 Services around the measurement technology in Germanys most accurate DAkkS laboratory*. Whether

More information

MTS Restan. Automatic System for Residual Stress Measurement by Hole-Drilling

MTS Restan. Automatic System for Residual Stress Measurement by Hole-Drilling Automatic System for Residual Stress The MTS3000 - Restan system for measuring residual stresses Fully automatic drilling and acquisition process ensuring high repeatability High speed drilling (400,000

More information

Technical Procedure for General Laboratory Equipment

Technical Procedure for General Laboratory Equipment Technical Procedure for General Laboratory Equipment 1.0 Purpose - This procedure specifies the required elements for the use of general laboratory equipment. 2.0 Scope - This procedure applies to all

More information

ISO INTERNATIONAL STANDARD. Natural gas Measurement of properties Volumetric properties: density, pressure, temperature and compression factor

ISO INTERNATIONAL STANDARD. Natural gas Measurement of properties Volumetric properties: density, pressure, temperature and compression factor INTERNATIONAL STANDARD ISO 15970 First edition 2008-06-15 Natural gas Measurement of properties Volumetric properties: density, pressure, temperature and compression factor Gaz naturel Mesurage des caractéristiques

More information

AC : A LABORATORY EXERCISE TO DEMONSTRATE HOW TO EXPERIMENTALLY DETERMINE THE OPERATING POINT FOR A FAN

AC : A LABORATORY EXERCISE TO DEMONSTRATE HOW TO EXPERIMENTALLY DETERMINE THE OPERATING POINT FOR A FAN AC 2007-206: A LABORATORY EXERCISE TO DEMONSTRATE HOW TO EXPERIMENTALLY DETERMINE THE OPERATING POINT FOR A FAN Robert Edwards, Pennsylvania State University-Erie Robert Edwards is currently a Lecturer

More information

KENYA ACCREDITATION SERVICE

KENYA ACCREDITATION SERVICE KENAS-GUD-016 01 16/03/2013 16 / 04/2013 GUD Page 1 of 18 Approval and Authorisation Completion of the following signature blocks signifies the review and approval of this Document. Name Job Title / Role

More information

Pressure measurement explained

Pressure measurement explained Rev A1, May 25 th, 2018 Sens4Knowledge Sens4 A/S Nordre Strandvej 119 G 3150 Hellebaek Denmark Phone: +45 8844 7044 Email: info@sens4.com www.sens4.com Introduction Pressure is defined as the force per

More information

CALIBRATION CERTIFICATE # 500

CALIBRATION CERTIFICATE # 500 CALIBRATION CERTIFICATE # 5 Calibration date : -- Certificate issued : --8 Company name Company address City, Province, Canada CLAS 9- Calibration of Mass flow meter Brooks SLA585S S/N : ABCD QUALITY PROGRAM

More information

Ensuring pipette & weighing device performance: Verification & Calibration

Ensuring pipette & weighing device performance: Verification & Calibration Ensuring pipette & weighing device performance: Verification & Calibration Wan Melissa Diyana bt Wan Normazlan Central Research Laboratories, Faculty of Medicine terms What is preventive maintenance? Regularly

More information

Tradinco Academy Courses Program

Tradinco Academy Courses Program Tradinco Academy Courses Program Calibration made simple 09/2016 page : 1 Index Introduction The art of Calibration Calibration Management Calibration Instruments Operation and proper use of Instruments

More information

Mass Flowmeters. Mass Flowmeters for Gases

Mass Flowmeters. Mass Flowmeters for Gases Mass Flowmeters Mass Flowmeters for Gases Fast, Accurate, Low Pressure Drop for critical measurement applications! Flow (Std l/min) Response to a step change in flowrate 300 200 100 4 Milliseconds 63%

More information

ISO/IEC 17025:2017. Accreditation No. Name and Address: Organization Name Address

ISO/IEC 17025:2017. Accreditation No. Name and Address: Organization Name Address Name and Address: Organization Name Address Phone Fax E-Mail Magnus Engineering and Maintenance Ltd. Faran 4,, Yavne 8122503, Israel +972-8-6599000 +972-8-942-0858 Lab@magnus-eng.com Date of issue 17.2.2019

More information

IE039: Practical Process Instrumentation & Automatic Control

IE039: Practical Process Instrumentation & Automatic Control IE039: Practical Process Instrumentation & Automatic Control IE039 Rev.001 CMCT COURSE OUTLINE Page 1 of 8 Training Description: Process Control & Instrumentation is becoming an increasingly important

More information

Organisation Internationale de Métrologie Légale

Organisation Internationale de Métrologie Légale Organisation Internationale de Métrologie Légale OIML INTERNATIONAL RECOMMENDATION Pressure balances Manomètres à piston OIML R 110 Edition 1994 (E) CONTENTS Foreword... 3 1 Scope... 4 2 Terminology...

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. PRECISION MEASURING CORP Groesbeck Hwy. Fraser, MI Robert Meyer Phone:

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. PRECISION MEASURING CORP Groesbeck Hwy. Fraser, MI Robert Meyer Phone: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PRECISION MEASURING CORP. 33250 Groesbeck Hwy. Fraser, MI 48026 Robert Meyer Phone: 586 293 4420 CALIBRATION Valid To: September 30, 2019 Certificate Number:

More information

Accuracy and Precision

Accuracy and Precision Accuracy and Precision Introduction Scientists use many skills as they investigate the world around them. They make observations by gathering information with their senses. Some observations are simple.

More information

Transferpette -8/-12

Transferpette -8/-12 Transferpette -8/-12 Testing Instructions (SOP) October 2013 1. Introduction The standard DIN EN ISO 8655 describes both the design and the testing of the piston operated pipette Transferpette 8/ 12. The

More information

Purpose. Introduction

Purpose. Introduction Purpose The objective of this experiment is to determine the density of an unknown liquid and solid. The students will become familiar with the techniques for measuring mass and volume of several samples

More information