SPECIALIZED ONLINE TRAINING COURSE LIST

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "SPECIALIZED ONLINE TRAINING COURSE LIST"

Transcription

1 SPECIALIZED ONLINE TRAINING COURSE LIST Grainger Online Safety Manager provides you with access to online training courses covering today's most relevant safety topics. The training content is designed to help you keep your organization safe and compliant. Online training is accessible 24/7 and is convenient for all users any time of the day or night, at any location. NFPA 70E 2012 ELECTRICAL TRAINING (provided by NextKnowledge) The 5-Module NFPA 70E 2012 online training course covers NFPA 70E, Standard for Electrical Safety in the Workplace. It has stand-alone, per-course pricing and is not part of the Core Safety Library. This course may be purchased stand-alone or as part of a Grainger Online SafetyManager subscription. For more information speak to your Grainger Account Representative or call 855-5eSafety ( ). English English ID # Spanish SCORM 1.2 NFPA 70E 2012 Electrical Training (5ZZZ9) E hrs. Module 1: An Introduction to NFPA 70E Module 2: Establishing an Electrically Safe Work Condition Module 3: Energized Electrical Work Permits Module 4: Personal Protective Equipment & Clothing Module 5: Use and Care of Protective Equipment and Other 70E Requirements Course Length OSHA OUTREACH (provided by AdvanceOnline Solutions) The OSHA 10-Hour & 30-Hour General Industry and Construction training courses and Hazardous Waste Operations (HAZWOPER) courses have stand-alone, per-course pricing and are not part of the Core Safety Library. The OSHA 10 & 30 courses may be purchased as a stand-alone course. The HAZWOPER course may be purchased stand-alone or as part of a Grainger Online SafetyManager subscription. For more information speak to your Grainger Account Representative or call 855-5eSafety ( ). English English ID # Spanish SCORM 1.2 Course Length HAZWOPER 8-Hour Refresher (5ZZZ5) E hr. OSHA 10-Hour Construction Safety (5ZZZ6) E hr. OSHA 10-Hour General Industry Safety (5ZZZ7) E hr. OSHA 30-Hour Construction Safety (5ZZZ8) E hr. These materials have been developed based on applicable federal laws and regulations in place at the time the materials were created. The courses are being provided for educational and informational purposes only and do not constitute and are not intended to provide OSHA compliance certification, regulatory compliance, a substitute for any hands on training required by applicable laws and regulations, or other legal or professional advice or services. By assessing these materials, you assume all responsibility and risk arising from the use of the content contained therein Grainger Safety Services, Inc eSafety 1

2 Specialized Online Training Course Descriptions NFPA 70E 2012 Series NFPA 70E 2012 Series (#7100) This self-paced online series covers NFPA 70E : Standard for Electrical Safety in the Workplace and is designed be used in conjunction with the 2012 edition of NFPA 70E. It is strongly recommended that the published standard be available for reference in order to obtain the greatest benefit from the courses. A companion work to NFPA 70E contains the text of NFPA 70E in its entirety as well as detailed commentary. The series includes five course modules. These courses are intended for use by employers, safety directors and trainers, managers, personal protective equipment (PPE) buyers, electrically qualified workers, and unqualified employees who need to guard against electrical hazards in the workplace. Trainees who successfully complete the NFPA 70E series are eligible for a Certificate of Completion to use toward their continuing education requirements and earn.4 CEU. Because these courses are offered in partnership with NFPA, the certificates bear the NFPA logo and Jim Shannon's signature. The NFPA 70E courses were authored by Noel Williams, a noted expert in the field with a long history of consulting with HAI. Noel is a noted speaker and author on NFPA 70E and delivers NFPA's seminars and conference sessions on topics related to NFPA 70E and the National Electrical Code. Noel has continued to update the online NFPA 70E courses through the last two code cycles. Module 1: An Introduction to NFPA 70E This module discusses the purpose and scope of the NFPA 70E, which is designed to minimize the risk of employee injuries from electrical dangers and establish a safer workplace for employees who work on or near exposed live parts. It provides an overview of elements of an electrical training program as well as the types of equipment used in establishing an overall electrical safety program. Upon completion of Module 1, the trainee should be able to: Understand and describe electric shock, arc flash, arc blast; personal protective equipment (PPE); approach boundaries; flash protection boundary; and working "on" or "near" live parts. Explain training requirements for single-employer sites and multi-employer sites, and for qualified and unqualified persons. Describe the elements of an electrical safety program, including program principles, controls and procedures; hazard/risk evaluation; and job briefing. Describe the proper use of test instruments and equipment, portable electric equipment, and over-current protection. Module 1 is divided into the following sections: Key Terms Training Requirements The Safety Program Use of Equipment 2014 Grainger Safety Services, Inc eSafety 2

3 Module 2: Establishing an Electrically Safe Work Condition This module covers the elements of an "electrically safe work condition," the principles of lockout/tagout, energy control procedures, and protective grounding. Upon completion of Module 2, the trainee should be able to: List the elements of the procedure for establishing an electrically safe work condition. Explain the principles of lockout/tagout execution. Outline the elements of control necessary to establish an electrically safe work condition. Identify equipment requirements for lockout/tagout and protective grounding. Module 2 is divided into the following sections: Lockout/Tagout Equipment Requirements Elements of Control Module 3: Energized Electrical Work Permits This module covers the sections of the NFPA 70E standard that provide workers with safety guidelines for times when de-energizing is not possible or when it could create increased or additional hazards. The requirements for energized electrical work permits were a new addition to the 2004 edition of NFPA 70E and were reorganized and clarified in This course will focus on exploring the different elements of these permits and why each is important. Upon completion of Module 3, the trainee should be able to: Formulate the justification for working on energized circuits. Define the approach boundaries surrounding energized circuits. Identify the flash hazard analysis procedure and the flash protection boundary. List the methods of limiting exposure to unsafe work conditions by unqualified persons. Module 3 is divided into the following sections: Justifying the Work Approach Boundaries Flash Hazard Analysis Arc Flash Hazard Analysis Other Elements Module 4: Personal Protective Equipment & Clothing This module covers the general requirements for personal protective equipment (PPE) and flame resistant (FR) clothing and how to select PPE for the specific hazards involved with various tasks. This course also includes "Playing It Safe," a series of self-study questions. Upon completion of Module 4, the trainee should be able to: Outline the selection criteria for PPE. Identify the risk/hazard category for a task using Table 130.7(C)(9)(a). Recognize the characteristics of PPE suitable for different types of work on electrical parts Grainger Safety Services, Inc eSafety 3

4 Module 4 is divided into the following sections: General Requirements Other Considerations Playing It Safe Module 5: Use and Care of Protective Equipment and Other 70E Requirements This module covers the additional requirements for PPE. Employees must be provided with and use PPE where electrical hazards are present. The PPE must be selected for the parts of the body that are both exposed to an electrical hazard, dependent upon the particular hazards that are present, and the work to be performed. Upon completion of Module 5, the trainee should be able to: Distinguish the major types of electrical hazards and the PPE that is selected to help reduce injuries from these. Identify the specific type of PPE used to protect each body part. Recognize the fabrics used in fire-resistant PPE. Describe the other protective equipment that may be used in an electrically hazardous task. Outline the other requirements, such as safety-related maintenance and testing of equipment, covered by NFPA 70E. Module 5 is divided into the following sections: General Requirements Other Considerations Other Protective Equipment Maintenance and Testing Other 70E Requirements This course is available in the following formats: English (#7100) 2014 Grainger Safety Services, Inc eSafety 4

5 OSHA Outreach Provided by HAZWOPER 8-HOUR REFRESHER (#7270) Overview When supplemented with site-specific information, this course meets the OSHA requirements in 29 CFR for eight hours of annual refresher training for workers conducting clean-up operations at hazardous waste sites. This AdvanceOnline HAZWOPER 8-Hour Refresher course covers: an overview of the HAZWOPER regulation, recent HAZWOPER developments, rules for a well-designed safety and health program, information about recognizing hazards, methods for controlling workplace hazards, information on PPE, rules and tools for monitoring hazards and conducting medical surveillance, confined space entry procedures, decontamination and emergency response procedures, and site-specific requirements. In addition, this course includes information on these safety topics: materials handling guidelines; emergency preparedness; stairs, ladders, and scaffolds; general safety requirements for welding and cutting; and safely using flammable and combustible liquids in specific workplace settings. Learning Outcomes After taking this course, the trainee will be able to: Find the HAZWOPER regulation and the related resources provided by OSHA, recognize the main topics of the HAZWOPER regulation, and list the general training requirements. Recognize the HAZWOPER 8-hour refresher training requirements, list recent changes in the law that may affect HAZWOPER employees, and apply lessons learned from the mistakes of others to avoid hazardous materials incidents at your workplace. Identify the components that should be present in your workplace safety and health program as required by the HAZWOPER regulations. Identify how the employer recognizes hazards through the site characterization and analysis, and how the employee identifies hazards on the job. Identify the different methods of controlling hazards at the workplace. Identify how to select the appropriate level and type PPE for workplace hazards while recognizing the potential hazards of PPE use. Identify the air monitoring and medical surveillance requirements for monitoring the hazards faced by workers involved in hazardous waste operations. Recognize the hazards and safe entry procedures for working in and around a confined space. Recognize the HAZWOPER rules for decontamination and emergency response. Recognize the site-specific requirements for a HAZWOPER jobsite. Identify the general safety guidelines for materials handling, the proper way to manually handle materials, and the rules for moving and storing materials. Explain the OSHA requirements for exit routes and Emergency Action plans. Recognize safe work practices for installing; maintaining; and using stairs, ladders, and scaffolds Outline the general safety requirements for welding and cutting. Match safety rules for flammable and combustible liquids with specific workplace settings, including industrial plants, bulk plants, service stations, processing plants, refineries, chemical plants, and distilleries. Audience: This course is intended for all general site workers who remove hazardous waste or who are exposed or potentially exposed to hazardous substances or health hazards. This refresher course is intended ONLY for those who have already completed the 40-hour or 24-hour HAZWOPER training. Regulations: OSHA - 29 CFR Approximate Length: 8 hours IACET Continuing Education Units: 0.8 CEU(s) This course is available in the following formats: English (#7270) 2014 Grainger Safety Services, Inc eSafety 5

6 OSHA 10-HOUR CONSTRUCTION SAFETY (#7300) Overview AdvanceOnline Solutions is the provider of this OSHA Outreach Training Program online course. Employers who have trained their workers with the OSHA Outreach Program for Construction have seen significant reductions in lost-time injuries. This 10-hour construction safety course is the online version of that successful program and is intended to provide instruction on a variety of general construction safety and health standards. As an OSHA 10-hour course, the trainee is expected to spend a minimum of 10 hours in the course. Course topics include: Introduction to OSHA, Struck and Caught Hazards, Electrical Safety, Fall Protection, Ladder Safety, Excavation Safety, Scaffold Safety, Materials Handling, Crane Safety, Personal Protective Equipment (PPE), and Permit-Required Confined Space Entry. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers. Workers must receive additional training, when required by OSHA standards, on the specific hazards of their job. New OSHA Policies OSHA has issued a new policy that limits all OSHA Outreach Training (classroom and online) to a maximum of 7.5 hours training per day in all OSHA 10-Hour courses. As a result, all 10-Hour courses must be delivered over a minimum of two days. OSHA has also issued a new policy of Program Jurisdiction Restrictions. Outreach Training Programs are now limited to OSHA Jurisdiction only. Trainee course completion cards can only be issued for trainees within U.S. jurisdiction (the 50 States and certain U.S. Territories). Note: Authorized OSHA Outreach Trainers sign and mail OSHA 10-Hour cards to trainees who successfully complete this course. Learning Outcomes After taking this course, the trainee will be able to: Explain the importance of OSHA in providing a safe and healthy workplace to workers covered by OSHA. Identify struck-by and caught-in or caught-between hazards associated with serious construction-related injuries. Identify safe work practices around electricity, including understanding electrical terms, basic electrical safety principles, and regulations which pertain to electrical safety. Understand the dangers involved in excavations and how to take responsibility and work safely around trenches and excavations. Know types of fall hazards and how to prevent falls in your work environment by using appropriate fall protection. Identify the crane safety requirements for the construction industry, and explain how to avoid accidents and identify hazards when working on or around cranes. Understand ladder hazards and ladder-related injuries and how to select, inspect, and maintain ladders. Properly use, maintain, store, and dispose of materials including safe operation of cranes, rigging, and mechanical equipment. Identify a confined space, its hazards, and requirements for confined spaces as listed under the Permit-Required Confined Spaces Standard, and duties and responsibilities of confined space workers. Select a variety of PPE based on a workplace evaluation and types of hazards. Recognize types of scaffolds and how to safely use them. Audience: This course is intended for construction workers and supervisors, and anyone involved in the construction industry. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers. Workers must receive additional training, when required by OSHA standards, on the specific hazards of the job. Regulations: OSHA - 29 CFR 1926 Approximate Length: 10 hours IACET Continuing Education Units: 1.0 CEU(s) This course is available in the following formats: English (#7300) 2014 Grainger Safety Services, Inc eSafety 6

7 OSHA 10-HOUR GENERAL INDUSTRY SAFETY (#7220) Overview AdvanceOnline Solutions is the provider of this OSHA Outreach Training Program online course. Each year, more and more employers train their workers with the OSHA Outreach Program for general industry. This 10-hour general industry course is the online version of that successful program and is intended to provide instruction on a variety of general safety and health standards. As an OSHA 10-hour course, the trainee is expected to spend a minimum of 10 hours in the course. Course topics include: Introduction to OSHA, Walking Working Surfaces, Workplace Fires and Emergencies, Electrical Safety, Personal Protective Equipment (PPE), Hazard Communication, Bloodborne Pathogens, Permit-Required Confined Spaces, Lockout/Tagout, and Forklift Safety. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers. Workers must receive additional training, when required by OSHA standards, on the specific hazards of their job. New OSHA Policies OSHA has issued a new policy that limits all OSHA Outreach Training (classroom and online) to a maximum of 7.5 hours training per day in all OSHA 10-Hour courses. As a result, all 10-Hour courses must be delivered over a minimum of two days. OSHA has also issued a new policy of Program Jurisdiction Restrictions. Outreach Training Programs are now limited to OSHA Jurisdiction only. Trainee course completion cards can only be issued for trainees within U.S. jurisdiction (the 50 States and certain U.S. Territories). Note: Authorized OSHA Outreach Trainers sign and mail OSHA 10-Hour cards to trainees who successfully complete this course. Learning Outcomes After taking this course, the trainee will be able to: Explain the importance of OSHA in providing a safe and healthful workplace to workers covered by OSHA. Apply the OSHA regulations for walking and working surfaces to help avoid slips, trips, and falls in the workplace, and recognize safe work practices for installing, maintaining, and using stairs, ladders, and scaffolds. Explain the OSHA requirements for exit routes and emergency action plans and describe OSHA requirements for Fire Prevention plans and portable fire extinguishers. Identify safe work practices around electricity, including understanding electrical terms, basic electrical safety principles, and regulations which pertain to electrical safety. Select a variety of PPE based on a workplace evaluation and the types of hazards, and take responsibility for correctly fitting, maintaining, and using PPE. List the elements of the Hazard Communication Standard and its training program, outline a Written Hazard Communication Program, list requirements for Material Safety Data Sheets and hazardous chemical inventories, and identify hazard warning labels. Identify bloodborne pathogens and common symptoms, and list engineering and work practice control measures that protect employees against exposure to bloodborne pathogens. Identify a confined space, its hazards, and requirements for confined spaces as listed under the Permit-Required Confined Spaces Standard, and duties and responsibilities of confined space workers. Identify hazardous energy sources and use appropriate energy-isolating devices, and describe the procedures for conducting a lockout/tagout. Recognize safe operating procedures for forklifts, workplace hazards, and how to handle special types of forklifts. Audience: This course is intended for all employees. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers. Workers must receive additional training, when required by OSHA standards, on the specific hazards of the job. Regulations: OSHA - 29 CFR 1910 Approximate Length: 10 hours IACET Continuing Education Units: 1.0 CEU(s) This course is available in the following formats: English (#7220) 2014 Grainger Safety Services, Inc eSafety 7

8 OSHA 30-HOUR CONSTRUCTION SAFETY (#7320) Overview AdvanceOnline Solutions is the provider of this OSHA Outreach Training Program online course. Employers who have trained their workers with the OSHA Outreach Program for Construction have seen significant reductions in lost-time injuries. This 30-hour construction safety course is the online version of that successful program and is intended to provide instruction on a variety of general construction safety and health standards. As an OSHA 30- hour course, the user is expected to spend a minimum of 30 hours in the course. Course topics include: Introduction to OSHA, Managing Safety and Health, Struck and Caught Hazards, Personal Protective Equipment (PPE), Hearing Conservation, Respiratory Protection, Lead and Crystalline Silica, Asbestos, Hazard Communication, Electrical Safety, Hand and Power Tools, Fall Protection, Ladder Safety, Excavations, Scaffolds, Crane Safety, Heavy Equipment, Forklift Safety, Materials Handling, Permit-Required Confined Spaces, Fire Safety, Welding and Cutting, Concrete and Masonry, Steel Erection, and Ergonomics. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers. Workers must receive additional training, when required by OSHA standards, on the specific hazards of their job. New OSHA Policies OSHA has issued a new policy that limits all OSHA Outreach Training (classroom and online) to a maximum of 7.5 hours training per day in all OSHA 30-Hour courses. As a result, all 30-Hour courses must be delivered over a minimum of four days. OSHA has also issued a new policy of Program Jurisdiction Restrictions. Outreach Training Programs are now limited to OSHA Jurisdiction only. Trainee course completion cards can only be issued for trainees within U.S. jurisdiction (the 50 States and certain U.S. Territories). Note: Authorized OSHA Outreach Trainers sign and mail OSHA 30-Hour cards to trainees who successfully complete this course. Learning Outcomes After taking this course, the trainee will be able to: Explain the importance of OSHA in providing a safe and healthful workplace to workers covered by OSHA Recognize how management plays a role to create a healthy and safe work environment through safety and health programs, worksite analysis to identify potential hazards on site, and levels of controls used to control exposure to hazardous materials and situations. Identify the struck-by and caught-in or caught-between hazards associated with serious construction-related injuries. Recognize the appropriate PPE to use based on a workplace evaluation and the types of hazards present. Identify the appropriate hearing protection for your workplace based on the hazards of excessive noise, the types of noise, the results of a noise-monitoring program, and the OSHA rules for hearing protection. Identify the appropriate respiratory protection for your workplace based on the types of airborne contaminants, the functions of different respirators, and the OSHA rules for respiratory protection. Identify hazards posed by lead and crystalline silica in construction and how to control and avoid them. Recognize the hazards of asbestos and identify ways to help stay safe as you work in and around asbestos, including monitoring, communication, training, medical surveillance, PPE, and engineering controls. List the components of a Written Hazard Communication Program, including its purpose, the risks posed by chemicals in the workplace, and the importance of the MSDS and hazard warning labels. Identify safe work practices for electricity, including recognizing electrical terms, basic electrical safety principles, and electrical safety regulations Grainger Safety Services, Inc eSafety 8

9 Recognize the safety hazards associated with non-powered hand tools and identify hazards related to powered hand tools. Recognize types of fall hazards and how to prevent falls in your work environment by using appropriate fall protection. Recognize ladder hazards, types of ladder-related injuries, and how to select, inspect, and maintain ladders. Identify the dangers involved in excavations and the safe work practices for employees working in or near trenches and excavations. Recognize the types of scaffolds and how to safely use them. Identify the safety requirements for working with or near cranes, including how to avoid accidents and how to recognize hazards. Recognize the safe work practices for working with or near heavy equipment. Recognize safe operating procedures for forklifts, workplace hazards, and how to handle special types of forklifts. Identify how to properly use, maintain, store, and dispose of materials. Identify a confined space, its hazards, the OSHA requirements for confined spaces, and the duties and responsibilities of confined space workers. Identify methods of fire prevention and describe OSHA requirements for fire protection. Outline the general safety requirements for welding and cutting and list the safety precautions. Identify the OSHA safety requirements for construction operations involving concrete and masonry. Recognize the OSHA safety requirements for steel erection activities. Recognize the role ergonomics plays in helping construction workers avoid work-related MSDs and identify how to avoid on-the-job injury when performing different types of activities. Audience This course is intended for construction workers and supervisors, and anyone involved in the construction industry. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers. Workers must receive additional training, as required by OSHA standards, on the specific hazards of the job. Regulations: OSHA - 29 CFR 1926 Approximate Length: 30 hours IACET Continuing Education Units: 3.0 CEU(s) This course is available in the following formats: English (#7320) 2014 Grainger Safety Services, Inc eSafety 9

SAFETY AND OSHA GUIDELINE CURRICULUM

SAFETY AND OSHA GUIDELINE CURRICULUM SAFETY AND OSHA GUIDELINE CURRICULUM CertiLearn - Non-Industrial OSHA Safety Guidelines These courses are ideal for any small business or non-industrial environment Safety Basics In this course you will

More information

10-Hour OSHA Training

10-Hour OSHA Training Designated Training Topics 10-Hour OSHA Training This training program is intended to provide entry level construction workers information about their rights, employer responsibilities, and how to file

More information

Access Interactive Training Courses at Any Time

Access Interactive Training Courses at Any Time OSHA OSHA 10-& 30-hr Online Courses for General Industry Get your workers the DOL/OSHA training they need and save your company both time and money with Summit Training Source s online OSHA 10- and 30-Hour

More information

OSHACAMPUS.com TM. powered by 360training. Course Catalog

OSHACAMPUS.com TM. powered by 360training. Course Catalog Course Catalog General Industry Safety Product Catalog General Industry Courses: Advanced Advanced level courses are for Safety Managers and Compliance Officers. They are focused on the compliance aspects

More information

9/7/2018. Introduction to the. Presenter. Disclaimer ADD PRESENTER PHOTO HERE. Richard A. Lantz, CVI, ASCS, VSMR

9/7/2018. Introduction to the. Presenter. Disclaimer ADD PRESENTER PHOTO HERE. Richard A. Lantz, CVI, ASCS, VSMR New Manual Copyright 2018, All Rights Reserved No part of this publication may be reproduced or distributed by any means, electronic or mechanical, including photocopy, recording, or any other information

More information

Omega Safety Training, Inc Hwy 6 North, Ste. 207 Houston, Texas Ph:

Omega Safety Training, Inc Hwy 6 North, Ste. 207 Houston, Texas Ph: Omega Safety Training, Inc. 4654 Hwy 6 North, Ste. 207 Houston, Texas 77084 Ph: 281-979-4849 Email: Chad@omegasafetytraining.com Training Syllabus: P.E.C. 24 Hour Core Compliance SafeLand USA & SafeGulf

More information

OSHA Compliance Saves Money, See How They Are Connected. Ryan S. Hellman, MS Principal EHS Consultant

OSHA Compliance Saves Money, See How They Are Connected. Ryan S. Hellman, MS Principal EHS Consultant OSHA Compliance Saves Money, See How They Are Connected Ryan S. Hellman, MS Principal EHS Consultant Why Safety? OSHA Regulations Approximately 50 individual OSHA General & Construction Industry Standards

More information

A Different Sort Of Knowledge Box

A Different Sort Of Knowledge Box The Oil & Gas Safety Library contains courses addressing Federally Mandated Training, including topics such as: Emergency Response Powered Industrial Equipment Environmental Product/Process Standards Hazard

More information

Committed to Providing Quality Safety Products and Services. Online Training

Committed to Providing Quality Safety Products and Services. Online Training Online Training Don t let a lack of time keep you from making your company a safe place to work. Arbill has designed our online education program to be as flexible as you need it to be, allowing you to

More information

Creative A LITTLE KNOWLEDGE IS A DANGEROUS THING... IMPROVE PERFORMANCE WITH OUR. COMPREHENSIVE TRAINING SERVICES Revised November 2007

Creative A LITTLE KNOWLEDGE IS A DANGEROUS THING... IMPROVE PERFORMANCE WITH OUR. COMPREHENSIVE TRAINING SERVICES Revised November 2007 T h e D e l l G r o u p, I n c. Creative s o l u t i o n s for your compliance burdens A LITTLE KNOWLEDGE IS A DANGEROUS THING... IMPROVE FORMANCE WITH OUR COMPREHENSIVE TRAINING SERVICES Revised November

More information

Environmental Health and Safety 2018 Catalog CONTENT :: COMPLIANCE :: TECHNOLOGY

Environmental Health and Safety 2018 Catalog CONTENT :: COMPLIANCE :: TECHNOLOGY Environmental Health and Safety 2018 Catalog CONTENT :: COMPLIANCE :: TECHNOLOGY 2018 360training.com 888-360-TRNG (8764) www.360training.com About 360training.com 360training.com is a privately held,

More information

Creative Solutions for your compliance burdens

Creative Solutions for your compliance burdens The Dell Group, Inc. Creative Solutions for your compliance burdens A LITTLE KNOWLEDGE IS A DANGEROUS THING... IMPROVE FORMANCE WITH OUR COMPREHENSIVE TRAINING SERVICES Revised September 2016 TRAINING

More information

RISK MANAGEMENT AND SAFETY COURSE DESCRIPTION CATALOG & CONTACT INFORMATION

RISK MANAGEMENT AND SAFETY COURSE DESCRIPTION CATALOG & CONTACT INFORMATION RISK MANAGEMENT AND SAFETY COURSE DESCRIPTION CATALOG & CONTACT INFORMATION Revised July 2015 COURSE INFORMATION This course description catalog describes courses offered by or through the Department of

More information

http://www.tfrec.wsu.edu/pages/safety/safety_plan Contents TFREC Occupational Illness and Injury Prevention Plan Section 1. Facilities, Laws and Responsibilities, Disciplinary Policy, Organization and

More information

70e Training - Electrical Safety in the Workplace

70e Training - Electrical Safety in the Workplace 70e Training - Electrical Safety in the Workplace Contact us Today for a FREE quotation to deliver this course at your company?s location. https://www.electricityforum.com/onsite-training-rfq This NFPA

More information

Required Courses. Total Hours 39

Required Courses. Total Hours 39 Public Sector Safety & Health Fundamentals Certificate Program for Construction Participants must complete a minimum of seven courses, comprised of required and elective courses, that include a minimum

More information

Access Interactive Training Courses at Any Time

Access Interactive Training Courses at Any Time OSHA OSHA 10-& 30-hr Online Courses for General Industry Get your workers the DOL/OSHA training they need and save your company both time and money with Summit Training Source s online OSHA 10- and 30-Hour

More information

Mid-Del Technology Center s Health, Safety & Environmental (HS&E) Training Center

Mid-Del Technology Center s Health, Safety & Environmental (HS&E) Training Center Mid-Del Technology Center s Health, Safety & Environmental (HS&E) Training Center Mid-Del Technology Center provides a wide variety of customized safety and health training. This training can be conducted

More information

There is one Fact Sheet for each module presented in the course. They are easily printed either singly or collectively.

There is one Fact Sheet for each module presented in the course. They are easily printed either singly or collectively. OSHA 10 GENERAL INDUSTRY FACT SHEETS The following Fact Sheets are provided to assist the student in identifying content and learning objectives for each module presented in the training course. There

More information

SH&E Training Matrix (Americas, all Business Groups)

SH&E Training Matrix (Americas, all Business Groups) SH&E Training Matrix (Americas, all Business Groups) Employee Name: Location: Employee Number: Date: Table 1: All Employees 10 Hour Outreach Course (OSHA General Industry or Construction) 30 Hour Outreach

More information

Authorized Outreach Trainer Update. November 28, 2017

Authorized Outreach Trainer Update. November 28, 2017 Authorized Outreach Trainer Update November 28, 2017 1 Breakdown of Topic Hours by Class Type 2 Link to Trainer Portal: https://outreachtrainer.gatech.edu/ Questions about using the website, submitting

More information

GIVE ME FIVE VIDEO EXCHANGE CLUB

GIVE ME FIVE VIDEO EXCHANGE CLUB GIVE ME FIVE VIDEO EXCHANGE CLUB The following programs are available to club members on DVD. An (S) beside a title denotes availability in Spanish. ATTITUDES & MOTIVATION 4778 Take Action To Avoid Distraction

More information

HAZARDOUS WASTE OPERATIONS AND EMERGENCY RESPONSE

HAZARDOUS WASTE OPERATIONS AND EMERGENCY RESPONSE Page 1 of 10 HAZARDOUS WASTE OPERATIONS AND EMERGENCY RESPONSE 1.0 SCOPE This Performance Assessment Guide for Hazardous Waste Operations and Emergency Response (HAZWOPER) will be used to carry out the

More information

On-Demand SAFETY Learning Library Catalog

On-Demand SAFETY Learning Library Catalog On-Demand SAFETY Learning Library Catalog Click on the course title or scroll down to see each course description. To register, please contact Michelle Spitzer at P A S Associates (661) 631-2165 Michelle@PASassociates.com

More information

SafeLandUSA - Syllabus

SafeLandUSA - Syllabus 1. Incident Reporting and Investigation Responsibility for reporting Definition of an incident to report How to report an incident Types of incidents Purpose of incident investigation Explain why incidents

More information

MIOSHA Administrative Requirements. Chad Ignatowski

MIOSHA Administrative Requirements. Chad Ignatowski MIOSHA Administrative Requirements: Metal Fabrication Industry MIOSHA Administrative Requirements Chad Ignatowski Office: (616) 696-3887 Cell: (616) 240-2739 Email: Chad@AccessSafety.biz www.accesssafety.biz

More information

NRC WVU OSHA #500 Trainer Course in Occupational Safety & Health Standards for the Construction Industry

NRC WVU OSHA #500 Trainer Course in Occupational Safety & Health Standards for the Construction Industry OSHA #500 Trainer Course in Occupational Safety & Health Standards for the Construction Industry February 6 9, 2018 March 6 9, 2018 April 24 27, 2018 May 1 4, 2018 May 15 18, 2018 Wilmington, DE May 15

More information

Accident Investigation For Everyone AED (Forerunner Model) Aerial Lifts in Industrial and Construction Environments

Accident Investigation For Everyone AED (Forerunner Model) Aerial Lifts in Industrial and Construction Environments Accidents Causes and Prevention Accident Investigation For Everyone AED (Forerunner Model) Aerial Lifts in Industrial and Construction Environments Anatomy of an Accident Asbestos Awareness Asbestos Awareness

More information

Management Plan for Electrical Safety ISD #535

Management Plan for Electrical Safety ISD #535 Management Plan for Electrical Safety ISD #535 Health & Safety Office Maintenance Service Building 10 SE 9 ½ Street Rochester, MN 55904 507-328-4507 MANAGEMENT PLAN FOR ELECTRICAL SAFETY Table of Contents

More information

NATIONAL TRAINING CENTER COURSE CATALOG

NATIONAL TRAINING CENTER COURSE CATALOG NATIONAL TRAINING CENTER COURSE CATALOG 2 The National Training Center, in association with National Field Services, offers your employees courses on a range of safety and technical related topics, led

More information

Recommended Facilitator Notes: (read the following text out-loud to participants while showing this slide)

Recommended Facilitator Notes: (read the following text out-loud to participants while showing this slide) Slide 1 Confined Space Entry for General Industry These materials have been developed based on applicable federal laws and regulations in place at the time the materials were created. The program is being

More information

EMA, Inc. SITE SAFETY PLAN

EMA, Inc. SITE SAFETY PLAN EMA, Inc. SITE SAFETY PLAN A. SITE DESCRIPTION JOB NAME: JOB NUMBER: DATE: PLAN REVISION NUMBER: SITE ADDRESS: Additional Site / Project Information: B. SCOPE OF WORK 1. 2. 3. 4. 5. 6. C. ONSITE ORGANIZATION

More information

Authorized Outreach Trainer Update. July 10, 2014

Authorized Outreach Trainer Update. July 10, 2014 Authorized Outreach Trainer Update July 10, 2014 1 If you have questions during the webinar, use the Chat. Your questions will either be answered during the webinar, if time allows, or will be answered

More information

National Safety Education Center

National Safety Education Center National Safety Education Center 2018-19 Course Catalog Construction General Industry Maritime Serving Illinois, Indiana, Michigan, Minnesota, Ohio, & Wisconsin since 1996 ABOUT USU National Safety Education

More information

Responsibilities / Accountability

Responsibilities / Accountability Responsibilities / Accountability What we will cover Brief history of OPP safety program OPP s commitment to safety Safety responsibilities Accountability for safety Employee expectations History of Safety

More information

Online Course and Lesson Objectives

Online Course and Lesson Objectives Online Course and Lesson Objectives 2 0 0 6 - No Downtime - No Travel Expenses - Available 24/7 - Customization - High Retention - Scalability Accident Investigation...3 Aerial Lift Safety...3 Air Emissions...3

More information

JJ Keller Safety Group Approved Courses

JJ Keller Safety Group Approved Courses JJ Keller Safety Group Approved Courses For a complete list of course available through JJ Keller, please visit www.pinnacol.com/training Aerial Lifts in Industrial and Construction Environments (45-60

More information

Harley-Davidson Motor Company

Harley-Davidson Motor Company Harley-Davidson Motor Company Standardized Contractor Safety Pre-Qualification Form (SCSPF) Complete and email this form to the appropriate facility by clicking on the location below: Arizona Proving Grounds

More information

Written Programs Listing

Written Programs Listing Written Programs Listing Bloodborne Pathogens (BBP) (29CFR1910.1030) This standard requires that precautions be taken to prevent the transmission of bloodborne pathogens. Viruses and bacteria can be found

More information

This is (Enter Company Name Here) Arc Flash Prevention policy. (Enter Name Here) will be responsible for overall direction of the Safety Program.

This is (Enter Company Name Here) Arc Flash Prevention policy. (Enter Name Here) will be responsible for overall direction of the Safety Program. Company Name: Policy/Procedure ID Number: 222 Date: Grainger Safety Services Inc. 2012 Arc Flash Prevention Policy This is (Enter Company Name Here) Arc Flash Prevention policy. (Enter Name Here) will

More information

January 25, TO: Our Clients. FROM: Will Johnson, Corporate Training Director. SUBJECT: Increase your bottom line, safety is profitable!

January 25, TO: Our Clients. FROM: Will Johnson, Corporate Training Director. SUBJECT: Increase your bottom line, safety is profitable! January 25, 2011 TO: Our Clients FROM: Will Johnson, Corporate Training Director SUBJECT: Increase your bottom line, safety is profitable! Ladies and Gentlemen: Workplace injuries and illnesses are preventable

More information

NSC Online Workplace Training

NSC Online Workplace Training ACCIDENT INVESTIGATION What is an Accident Investigation? Learn why an accident investigation is conducted and how to plan the investigation. Importance of gathering information Conducting an effective

More information

1995 Metric CSJ SPECIAL PROVISION ITEM 7. Legal Relations And Responsibilities To The Public

1995 Metric CSJ SPECIAL PROVISION ITEM 7. Legal Relations And Responsibilities To The Public 1995 Metric CSJ 0915-12-242 SPECIAL PROVISION TO ITEM 7 Legal Relations And Responsibilities To The Public For this project, Item 7 "Legal Relations and Responsibilities to the Public", of the Standard

More information

Leader s Guide ERI Safety Videos

Leader s Guide ERI Safety Videos 1717 SAFE ELECTRICAL WORK PRACTICES & THE 2018 NFPA 70E Leader s Guide ERI Safety Videos SAFE ELECTRICAL WORK PRACTICES & THE 2018 NFPA 70E This easy-to-use Leader s Guide is provided to assist in conducting

More information

Waste Industry Safety & Health

Waste Industry Safety & Health Waste Industry Safety & Health A practical pocket guide for the Waste industry Supported by: Delivering the Solution Together Introduction The Waste Industry Safety and Health (WISH) forum is supporting

More information

SAFET Y TR AINING CATALOG

SAFET Y TR AINING CATALOG SAFET Y TR AINING CATALOG CO R P O R AT E A N D CO M M U N I T Y S ERV I CES D IV I S I O N www.monroeccc.edu MCCC Mission Statement Monroe County Community College provides a variety of higher education

More information

Leader s Guide ERI Safety Videos

Leader s Guide ERI Safety Videos 1419 SAFE ELECTRICAL WORK PRACTICES & 2015 NFPA 70E Leader s Guide ERI Safety Videos SAFE ELECTRICAL WORK PRACTICES & 2015 NFPA 70E This easy-to-use Leader s Guide is provided to assist in conducting a

More information

Directory of Safety Services and Courses

Directory of Safety Services and Courses 639 N. Salina St., Syracuse, NY 13208 Environmental, Health & Safety Phone: 315-428-1959 Fax: 315-428-0432 Consultants www.churchillenvironmental.com Directory of Safety Services and Courses Office (315)

More information

Scope: This plan applies to all personnel, including contractors, who enter or work in confined spaces, or supervise such activities.

Scope: This plan applies to all personnel, including contractors, who enter or work in confined spaces, or supervise such activities. 11/13/1995 4 5/20/2013 1 of 10 Authority and Scope Regulation: 29 CFR 1910.146 Scope: This plan applies to all personnel, including contractors, who enter or work in confined spaces, or supervise such

More information

Hazardous Materials Management. Presented by. James E. Roughton, MS, CSP, CRSP, CHMM.

Hazardous Materials Management. Presented by. James E. Roughton, MS, CSP, CRSP, CHMM. Hazardous Materials Management Presented by. James E. Roughton, MS, CSP, CRSP, CHMM. Hazardous Waste Operations And Emergency Response (HAZWOPER) 29 CFR 1910.120 Scope Clean-up Operations At Uncontrolled

More information

The prevention of accidents and injuries is the responsibility of both the employer and employee.

The prevention of accidents and injuries is the responsibility of both the employer and employee. Builders Trust Field Safety Services has the mission of providing long term, stable solutions to workers compensation obligations and liabilities for its participants and the members of the New Mexico

More information

Quality Companies USA TRAINING SYLLABUS

Quality Companies USA TRAINING SYLLABUS Quality Companies USA TRAINING SYLLABUS Quality Companies USA Quality Companies USA HSE / Training Group 425 Griffin Road Youngsville, LA 70592 (337) 857-6000 All right reserved. No part of this publication

More information

Hazardous Waste Training Plan. Supersedes: 02/15/16 (Rev.02) Preparer: Owner: Approver: EHS Team Member EHS Team Member EHS Manager

Hazardous Waste Training Plan. Supersedes: 02/15/16 (Rev.02) Preparer: Owner: Approver: EHS Team Member EHS Team Member EHS Manager Procedure No.: PA-033-0006 Page: 1 of 19 Port Arthur, TX. Reviewed: 02/18 Effective: 02/06/18 (Rev.03) Supersedes: 02/15/16 Preparer: Owner: Approver: EHS Team Member EHS Team Member EHS Manager Document

More information

BRIT TEAM PLATEFORM Training Module List

BRIT TEAM PLATEFORM Training Module List BRIT TEAM PLATEFORM Training Module List Fleet Safety Accident Scene Management Every day, drivers are involved in motor vehicle emergencies and accidents. The goal of this training program is to instruct

More information

Section: Property WRITTEN HAZARD COMMUNICATION PROGRAM AND ADMINISTRATION Date Created: September, 2006 Date Edited: September, 2006

Section: Property WRITTEN HAZARD COMMUNICATION PROGRAM AND ADMINISTRATION Date Created: September, 2006 Date Edited: September, 2006 Deptford Township Board of Education Section: Property 7431. WRITTEN HAZARD COMMUNICATION PROGRAM AND ADMINISTRATION Date Created: September, 2006 Date Edited: September, 2006 POLICY 7431- WRITTEN HAZARD

More information

Module: Permit to work System

Module: Permit to work System Module: Permit to work System Aim: To know about best practice of PTW. It is a procedure designed to ensure that work is carried out in the safest possible way by considering the potential hazards and

More information

OSHA 30 Syllabus. Laborers Training School. Time: 40 hours. Maximum Class Size: 30. Prerequisites: None

OSHA 30 Syllabus. Laborers Training School. Time: 40 hours. Maximum Class Size: 30. Prerequisites: None Time: 40 hours Maximum Class Size: 30 Prerequisites: None Course Description: The 40-hour OSHA Outreach Training Program provides training for workers and employers on the recognition, avoidance, abatement,

More information

Course outline: 111 WH&S E101A UEENEEE101A - Occupational Health and Safety regulations, codes and practices in the workplace

Course outline: 111 WH&S E101A UEENEEE101A - Occupational Health and Safety regulations, codes and practices in the workplace RTO Code 41319 Course outline: 111 WH&S E101A UEENEEE101A - Occupational Health and Safety regulations, codes and practices in the workplace Qualification: Applicable to: Unit of competency: Related policies:

More information

B&B Gas Well Services, LLC HEALTH, SAFETY AND ENVRONMENTAL MANUAL HAZARD COMMUNICATION PROGRAM

B&B Gas Well Services, LLC HEALTH, SAFETY AND ENVRONMENTAL MANUAL HAZARD COMMUNICATION PROGRAM B&B Gas Well Services, LLC HEALTH, SAFETY AND ENVRONMENTAL MANUAL HAZARD COMMUNICATION PROGRAM 1 HAZARD COMMUNICATION PROGRAM Table of Contents Topic Page 1.0 Objective 3 2.0 Scope 3 3.0 References 3 4.0

More information

2018 NFPA 70E Electrical Safe work practices

2018 NFPA 70E Electrical Safe work practices This course provides a thorough knowledge of the dangers and recommended safe behaviors for those who work daily around electrical hazards. This course goes into examples of real life application to give

More information

Mobile Training Unit (MTU)

Mobile Training Unit (MTU) Mobile Training Unit (MTU) The MTU provides a convenient way of meeting training requirements by bringing a range of short duration health & safety and operative training onsite. Through the MTU, employees

More information

HAZWOPER. A planning guide for the perplexed. The Oregon Occupational Safety & Health Division

HAZWOPER. A planning guide for the perplexed. The Oregon Occupational Safety & Health Division HAZWOPER A planning guide for the perplexed The Oregon Occupational Safety & Health Division HAZWOPER A planning guide for the perplexed The Oregon Occupational Safety & Health Division Contents Introduction...

More information

OSHA Federal Standards October 1, 2016 September 30, 2017

OSHA Federal Standards October 1, 2016 September 30, 2017 OSHA Federal Standards October 1, 2016 September 30, 2017 29 CFR 1926 SUBPARTS 29 CFR 1926. C M L L E M M E X M MOST FREQUENTLY CITED SERIOUS VIOLATIONS IN CONSTRUCTION 2017.501(b)(13) FALL PROTECTION

More information

New Hire Safety Orientation. Welcome to Flexicrew, our number one priority is you and your safety.

New Hire Safety Orientation. Welcome to Flexicrew, our number one priority is you and your safety. New Hire Safety Orientation Welcome to Flexicrew, our number one priority is you and your safety. 1 New Employee Responsibilities As a contract worker with Flexicrew Staffing, I understand by signing this

More information

West Texas Safety Training Center

West Texas Safety Training Center West Texas Safety Training Center SafeLand USA Outline Lesson 1- Introduction Importance of Training o Workplace injuries are costly o Benefits of safe behavior/attitude is contagious Introduction topics

More information

SH&E Training Matrix (EMIA)

SH&E Training Matrix (EMIA) SH&E Training Matrix (EMIA) Employee ame: Location: Employee umber: Date: 1. Table 5 All Employees - EMIA Required Employee induction within one week of starting at AECOM As required by client of local

More information

Competency type. positions. All workers (including contractors), higher degree students and volunteers

Competency type. positions. All workers (including contractors), higher degree students and volunteers Appendix A Training Required for Work Health & Safety Training WHS general and/or site/work specific induction of the emergency procedures and assembly areas Local first aid provisions. of hazards and

More information

Accident/Illness Prevention: 6 Keys

Accident/Illness Prevention: 6 Keys Accident/Illness Prevention: 6 Keys 1. Identification of hazards This is the foundation for our Accident Prevention Program. The boxes we have checked in the chart below, "Typical Work Site Hazards or

More information

Approved for public release; distribution is unlimited.

Approved for public release; distribution is unlimited. EMERGENCY RESPONSE TO HAZARDOUS SUBSTANCE SPILLS AND RELEASES IN ARMY MILITARY TREATMENT FACILITIES TECHNICAL INFORMATION PAPER NO. 59-040-0915 PURPOSE. To provide compliance strategies for responding

More information

HAZARD RECOGNITION EVALUATION and CONTROL

HAZARD RECOGNITION EVALUATION and CONTROL What is a hazard? HAZARD RECOGNITION EVALUATION and CONTROL Hazard - a dangerous object, event, behaviour or condition (in the workplace) which has the potential to cause injury, illness or property damage.

More information

Presented By David F. Coble, MS, CSP. Safety Associates

Presented By David F. Coble, MS, CSP. Safety Associates OSHA Required Training Presented By David F. Coble, MS, CSP Coble, Taylor & Jones Safety Associates www.ctjsafety.com t David F. Coble, MS, CSP 36 years of safety experience including 12 y y p g years

More information

Arc Flash. Safety 21

Arc Flash. Safety 21 Arc Flash Safety 21 Arc Flash Introduction Electrical Hazards Safety Planning De-Energizing Equipment Working Hot Summary Introduction Most people don t think about electricity very much, which is surprising

More information

Serving the Southeast including Alabama, Georgia, Kentucky, Georgia, Mississippi, North Carolina, Tennessee, and South Carolina

Serving the Southeast including Alabama, Georgia, Kentucky, Georgia, Mississippi, North Carolina, Tennessee, and South Carolina Serving the Southeast including Alabama, Georgia, Kentucky, Georgia, Mississippi, North Carolina, Tennessee, and South Carolina 2612 Cypress Ridge Blvd., Ste. 101 Wesley Chapel, FL 33544 Phone: 813-994-1195

More information

SAFETY POLICY AND PROCEDURE MANUAL QUESTIONNAIRE

SAFETY POLICY AND PROCEDURE MANUAL QUESTIONNAIRE The following questionnaire is designed to aid us in the creation of your policy and procedure manual. Please place a checkmark in the boxes that correspond to the sections that you would like to be included

More information

Safe work method statements

Safe work method statements Information about Safe work method statements How to prepare and use a safe work method statement (SWMS) for high risk construction work (HRCW) and who needs to prepare one. October 2018 Key concepts Hazard

More information

CONFINED SPACE WRITTEN PROGRAM

CONFINED SPACE WRITTEN PROGRAM CONFINED SPACE WRITTEN PROGRAM Maple River Public Schools ISD#2135 Confined Space Entry Plan (Permit Required) Maple River Public School Plan last updated: October, 2014 Authority and Scope Regulation:

More information

Safety Training Source

Safety Training Source Safety Training Source COURSE CATALOG APRIL 2018 MAP CLIENT SERVICES MAP@SAFETYNATIONAL.COM Table of Contents Accident Investigation - CLMI (Streaming Video)...5 Accident Investigation for Healthcare (Streaming

More information

Reducing Exposures From Confined Space Entry

Reducing Exposures From Confined Space Entry Reducing Exposures From Confined Space Entry Over 1.6 million Americans work in Confined Spaces each year, and each year many accidents occur. Many of these accidents lead to serious injury or death from

More information

Safety Manual Section 6 Confined Space

Safety Manual Section 6 Confined Space 6. CONFINED SPACE ENTRY Introduction The following sections provide general guidelines and procedures for confined space entry. This section covers the following topics: Topic Page 6.1 Types of s... 6-2

More information

OFFICE OF STATE HUMAN RESOURCES

OFFICE OF STATE HUMAN RESOURCES OFFICE OF STATE HUMAN RESOURCES NUMBER: PPE-1 TOTAL PAGES: 8 SUBJECT: Personal Protective Equipment Program Effective Date: Revision Date: Revision #: RELATED LEGISLATION: The purpose of this program is

More information

Key Technology, Inc. Confined Space Entry Program. July, 2017

Key Technology, Inc. Confined Space Entry Program. July, 2017 Key Technology, Inc. Confined Space Entry Program July, 2017 Page 1 of 11 Key Technology, Inc. CONFINED SPACE ENTRY PROGRAM OVERVIEW Purpose: The purpose of this program is to ensure the protection of

More information

State University of New York College at Oneonta

State University of New York College at Oneonta State University of New York College at Oneonta CONFINED SPACE ENTRY POLICY - PROCEDURE REVIEWED 05/11/17 CONFINED SPACE ENTRY - WRITTEN PLAN POLICY The State University College at Oneonta is committed

More information

Information on Safety Training Courses

Information on Safety Training Courses Health, Safety, and Wellness Human Resources Information on Safety Training Courses Aerial Lift Initial Aerial lift training must be delivered by a recognized 3rd party provider. Aerial lift training is

More information

RISK CONTROL SOLUTIONS

RISK CONTROL SOLUTIONS RISK CONTROL SOLUTIONS A Service of the Michigan Municipal League Liability and Property Pool and the Michigan Municipal League Workers Compensation Fund REDUCING EXPOSURES FROM CONFINED SPACE ENTRY Over

More information

Unit Title: Health and Safety in a Construction Environment

Unit Title: Health and Safety in a Construction Environment Unit Credit Value: 4 Unit Level: One Unit Guided Learning Hours: 40 Ofqual Unit Reference Number: K/505/1933 Unit Review Date: 30/04/2018 Unit Sector: 5.2 Building and Construction Unit Summary This unit

More information

ESSENTIAL SAFETY RESOURCES

ESSENTIAL SAFETY RESOURCES ESSENTIAL SAFETY RESOURCES GS-3018 HAZARD IDENTIFICATION AND RISK ASSESSMENT Originator: Safety Advisor s Signature: Type Name Approval: HSE Manager s Signature: Type Name Approval: Operations Manager

More information

Safe Work Permits A Safety Advantage

Safe Work Permits A Safety Advantage Safe Work Permits A Safety Advantage AMI Safety Conference March 20, 2013 J. Dan McCausland Senior Director, Worker Safety & HR Safe Work Permits Everyone knows what a Hot Work Permit is -- right? Where

More information

PERSONAL PROTECTIVE EQUIPMENT

PERSONAL PROTECTIVE EQUIPMENT 0 PERSONAL PROTECTIVE EQUIPMENT Supplement to Standard Training Module TRAINING REQUIREMENTS OVERVIEW This standard Vivid training module provides a general overview of Personal Protective Equipment (PPE).

More information

Working Alone Safety Program

Working Alone Safety Program Facilities Operations and Development Environmental Health and Safety 1314 Kinnear Road #106 Columbus, OH 43212-1168 614-292-1284 Phone 614-292-6404 Fax www.ehs.osu.edu Working Alone Safety Program Prepared

More information

ASTC210 (SQA Unit Code - F4PS 04) Clean confined spaces

ASTC210 (SQA Unit Code - F4PS 04) Clean confined spaces Overview This unit is about maintaining levels of cleanliness in confined spaces. When working in confined spaces it is important to be vigilant against possible hazards and risks that may arise during

More information

RESPIRABLE CRYSTALLINE SILICA PROGRAM July 2018

RESPIRABLE CRYSTALLINE SILICA PROGRAM July 2018 RESPIRABLE CRYSTALLINE SILICA PROGRAM July 2018 A. SCOPE The Respirable Crystalline Silica Program is established in accordance with 29 CFR 1910.1053 and 29 CFR 1926.1153, Respirable Crystalline Silica.

More information

Electrical Safety Work Practices

Electrical Safety Work Practices Work Practices I. SCOPE This program covers any SOUTHWESTERN COMMUNITY COLLEGE employee that may work or be exposed to exposed electrical systems: To assure that employees are not exposed to potentially

More information

Section J. How to develop safety elements for project safety management system. How to develop safety elements for project SMS

Section J. How to develop safety elements for project safety management system. How to develop safety elements for project SMS Section J How to develop safety elements for project safety management system 1. Once the project management has developed or adopted a safety policy, it needs to develop safety elements to meet the objectives

More information

SAFETY TRAINING and SERVICES CONFINED SPACE FALL PROTECTION EXCAVATION FORKLIFTS SCAFFOLD. Rescue. Spring D2000 Safety: Key Facts

SAFETY TRAINING and SERVICES CONFINED SPACE FALL PROTECTION EXCAVATION FORKLIFTS SCAFFOLD. Rescue. Spring D2000 Safety: Key Facts TM SAFETY TRAINING and SERVICES CONFINED SPACE FALL PROTECTION D2000 Safety: Key Facts EXCAVATION Founded in 1993 and located in Eugene, Oregon, we provide training for workers in high-hazard environments

More information

Industry Code: Alberta Small Employer OHS Legislated Requirements

Industry Code: Alberta Small Employer OHS Legislated Requirements This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. Services in this industry can

More information

Personal Protective Equipment. Individual Unit Function: Safety Procedure No.: SOP-0147 Page: 1 of 9

Personal Protective Equipment. Individual Unit Function: Safety Procedure No.: SOP-0147 Page: 1 of 9 Procedure No.: SOP-0147 Page: 1 of 9 1. PURPOSE This procedure describes the minimum requirements concerning personal protective equipment for personnel who are exposed to areas or tasks where hazards

More information