Personal Protective Equipment. Erin Cropsey OSHA Region V DIOSH Day
|
|
- Alexandra Nelson
- 6 years ago
- Views:
Transcription
1
2 Personal Protective Equipment Erin Cropsey OSHA Region V DIOSH Day
3 Introduction Hazards contributing to lack of PPE use in top ten most frequently cited 45% of fatalities each year due in part to lack of proper PPE In top ten list of most accessed standards It must fit, must actually protect, & remove defective equipment
4 Where to Start? Determining when to use PPE Hierarchy of Controls Factors to consider Industry-specific Hazard-specific
5 PPE Hazard Assessment Assessment of all jobs/tasks Determine associated hazards Process hazards Environment Chemical Biological Radiation Mechanical
6 Industry-Specific PPE General Industry Construction Maritime Agricultural
7 Applicable Standards General Industry 1910 Subpart I Construction Subpart E Hazard Specific Standards Eg. Subpart G, Z, R, M, etc.
8 Fall Hazards Falls contributed to 35% of fatalities What type of work is being performed? What fall protection is needed Fall restraint system (6/28/04 Letter) Work positioning equipment Personal fall arrest system Steel erection
9 Electrical Hazards Hazards from flames or electric arcs If there is exposure, estimate incident energy Prohibit certain types of clothing Would FR clothing be necessary? Arc rating greater than the estimated incident energy
10 Faceshield Hazard-Specific PPE ANSI Z87.1 ANSI Z87.1+ Foot protection Head protection Hand protection
11 Head protection Potential for head injuries Specific type for electrical hazards Meet ANSI Z89.1
12 Type I Type II Classes of Hard Hats Electrical Classes Class G (General) Class E (Electrical) Class C (Conductive)
13 High-Visibility What type of work is being performed? When is the work being performed? Where is the work being performed? ANSI/ISEA Letters of Interpretation
14 Garment Classes Class 1 Class 2
15 Garment Classes Background material Class 3 Retroflective material Width of retroflective material Yards of retroflective material Photometric performance
16 Hand protection Required for use to prevent hazards from: Skin absorption Severe lacerations Severe abrasions Chemical burns Thermal burns Temperature extremes
17 Gloves for Chemical Exposure Evaluate durability Breakthrough period Follow manufacture s recommendation
18 Provides the highest permeation resistance to gas or water vapors; frequently used for ketones and esters (M.E.K., Acetone, and Acetates) Butyl
19 Protection against wide variety of solvents Nitrile harsh chemicals fats and petroleum products excellent resistance to cuts, snags, punctures and abrasions
20 Kevlar Protects against cuts and abrasion
21 Directives Combustible Dust 29 CFR CFR CFR General Duty Clause What would be considered adequate PPE?
22 Written Requirements At a minimum, assessment must include: Written certification Certifying official identified Date of last evaluation
23 Implementing Programs Implement required programs Written program Medical evaluations Fit testing Baseline audiograms
24 Training What When How Limitations Care, maintenance, life, & disposal Retraining
25 Training on Fall Protection Ensuring employees understand when to inspect equipment Ensuring employees understand how to inspect equipment Ensuring defective equipment is taken out of service
26 Hierarchy of Controls PPE Hazard Assessment Directives Industry Specific Directives Specific Standard General Standard Letters of Interpretation Programs Hazard Specific Letters of Interpretation Medical Training Training
27 Employer s Responsibilities Ensure employee wears PPE When the employee chooses to use their own PPE Employer payment of PPE
28 Payment of PPE Examples of required PPE for compliance with OSHA s standards 29 CFR (c)(4), Respiratory Protection 29 CFR (k)(2)(i), Permit-required Confined Spaces 29 CFR (g)(1), Chromium (VI) 29 CFR (i), Cadmium
29 Payment of PPE If the employer requires employees to keep PPE at the workplace (non-specialty) then the employer must pay for item(s)
30 Employers do not have to pay for: Non-specialty safety-toe protective footwear (steel-toe shoes/boots) Non-specialty prescription safety eyewear Sunglasses/sunscreen Sturdy work shoes Lineman's boots Ordinary cold weather gear (coats, parkas, cold weather gloves, winter boots) Logging boots required under Sec (d)(1)(v) Ordinary rain gear Back belts Long sleeve shirts and long pants Dust masks used under the voluntary use provisions in
31 Employers must pay for Metatarsal foot protection Boots for longshoremen working logs Rubber boots with steel toes Shoe covers, toe caps & metatarsal guards. Non-prescription eye protection Prescription eyewear inserts/lenses for full face respirators Prescription eyewear inserts/lenses for welding and diving helmets Goggles and face shields Laser safety goggles Fire fighting PPE (helmet, gloves, boots, proximity suits, full gear) Hard hat Hearing protection Welding PPE Items used to protect from infectious agents (aprons, lab coats, goggles, disposable gloves, shoe covers, etc) Gloves used for protection from dermatitis, severe cuts/abrasions
32 Employers must pay for Rubber sleeves Aluminized gloves Chemical resistant gloves & clothing Barrier creams (unless used solely for weather-related protection) Rubber insulating gloves Mesh cut proof gloves Mesh or leather aprons SCBA, atmosphere-supplying respirators (escape only) Respiratory protection Fall protection. Ladder safety device belts Climbing ensembles used by linemen (e.g., belts and climbing hooks) Window cleaners safety straps Personal flotation devices (life jacket) Chemical protective suits Reflective work vests Bump caps
33 Methods of payment Acceptable methods of payment: Employer purchase and distribution Allowances Vouchers Employer reimbursement to employees
34 Resources Laws & Rulemaking Standards m?p_doc_type=standards&p_toc_level=1&p_key value=1910 FAQs
35 Resources High-Visibility Quick Reference Directives m?p_doc_type=directives&p_toc_level=0&p_keyv alue= Letters of Interpretation m?p_doc_type=interpretations&p_toc_level=0 &p_keyvalue=
36 NFPA70E 2012 Personal Protective Equipment
37 Protective Clothing Topics Evaluating Workplace Hazards Protecting Your Employees Work clothing and FR apparel standards NFPA 70E, 2012 Science vs. Real World Managing Your Clothing Assets Apparel selection criteria Rent vs. buy Home wash vs. industrial laundry
38 Evaluating Workplace Hazards Hazard Assessment Goals
39 Hazard Assessment Goals Identification of hazards presenting unacceptable risk to employee health, safety and productivity. Selection of practical and feasible control strategies that minimize employee exposures and optimize employee comfort. Identifying and controlling workplace hazards involves both hard data and a savvy understanding of soft issues
40 Hazard Assessment Practices Many methods, tools and resources exist to help in completion of hazard recognition phase, including: Standards / OSHA regulations review Review of records / files Literature review Walk-around surveys Staff interviews
41 Protecting Your Employees Standards / Regulations
42 General Standards Applicable to Protective Apparel OSHA s General Duty Clause Employer has the responsibility to provide a place of employment free from recognized hazards Consider the risks Address those risks Develop an action plan Consumer Products Safety Commission s Requirements for Clothing Textiles, Title 16 C.F.R. Part 1610 Purpose of general wearing apparel flammability standards is to keep dangerously flammable textiles and garments made of these textiles out of commerce Ease of ignition Flame spread time
43 Title 16 C.F.R. Part 1610 Regulation establishes three classes of flammability based on the time of flame spread: Class 1: Normal Flammability (4+ seconds) Class 2: Intermediate Flammability (4 to 7 seconds) Class 3: Rapid, Intense Burning (- 4 seconds) Not suitable for clothing Daily-wear sold in U.S. is required to meet Class 1 or 2 requirements.
44 Standards Specific to Industry 29 CFR The employer shall ensure that each employee who is exposed to the hazards of flames or electric arc does not wear clothing that, when exposed to flames or electric arcs, could increase the extent of the injury that would be sustained by the employee. Flame resistance: ASTM D 6413 Protection from flash fire: NFPA 2112 Protection from molten substances: ASTM F Insuring electrical safety: NFPA 70E ASTM F 1506 NESC
45 ASTM D Flame Resistance Vertical flame test records: AFTERFLAME: number of seconds there is visible flame upon removal of the source After flame must average 2.0 seconds maximum AFTERGLOW: number of seconds there is visible glow, upon removal of the source After glow must average 5.0 seconds maximum CHAR LENGTH: measurement of fabric destroyed by flame. Char length must average 6.0 inches maximum
46 NFPA Protection of Industrial Personnel Against Flash Fire If potential for flash fire is determined to exist, flame resistant apparel must be used that passes ASTM F1930
47 ASTM F Evaluating Heat Transfer upon Contact with Molten After impact: Visual examination: Substances Charring, Shrinkage, Metal adherence, & Perforation Calorimeter temperature rise Amount of heat transferred through the fabric or layers of fabric is recorded
48 National Electric Safety Code (NESC ) Definition: for Utilities The NESC determines the ground rules to be used by persons while in installation, operation, or maintenance of electric supply and communication lines and associated equipment The NESC is not law It s considered a voluntary consensus standard Note: OSHA references the NESC when enforcing electrical safety in the utility market.
49 NFPA 70E - Standard for Electrical NFPA 70E overview: Safety Incident Energy Analysis Hazard Risk Categories (HRC) ASTM F 1506 requires: Thread, findings and closures must not contribute to injury in an arc event. Testing for Flame resistance after 25 laundry cycles, (home wash) or dry cleanings, in accordance with ASTM D Arc rating must appear on clothing labels
50 NFPA 70E 2112 Standard for Electrical Safety Next Revision Cycle Proposals and comment period conducted in 2010 Approval at the annual meeting in June.
51 Overview of Proposals 540 proposals received. 44% rejected The balance was: Accepted Accepted in principle Accepted in Part
52 General Direction More specific line item requirements. Lowering of acceptable levels of risk. Not much change to higher risk/ higher energy tasks. Change at the low energy end. PPE required Emphasis on FR quality.
53 New Requirements Requires documentation of meetings between host employers and contractors. Adds the regular supervision clause in for all employers. The employer shall determine, through regular supervision and or through inspections conducted on at least an annual basis that each employee is complying with the safety-related work practices required by this standard. Mandatory retraining every 3 years.
54 Work Permit Expanded situations where Energized Work Permit is required. When working within the Limited Approach Boundary or the arc flash boundary of exposed energized electrical conductors and circuit parts that are not placed in an electrically safe work condition work to be performed shall be considered energized electrical work and shall be performed by written permit only.
55 AED Training - Annual Employees responsible for taking action in case of emergency shall be trained in methods of release of victims from contact with exposed energized electrical conductors or circuit parts. Employees shall be regularly instructed in methods of first aid and emergency procedures, such as approved methods of resuscitation. Training of employees in approved methods of resuscitation, including cardiopulmonary resuscitation and automatic external defibrillator (AED) use, shall be certified by the employer annually.
56 Equipment Labeling Electrical equipment such as switchboards, panel boards, industrial control panels, meter socket enclosures, and motor control centers that are in other than dwelling units, that and are likely to require examination, adjustment, servicing, or maintenance while energized shall be field marked with a label containing all the following information: (1) At least one of the following: a. Available incident energy and the corresponding working distance. b. Minimum arc rating of clothing. c. Required level of PPE. d. Highest Hazard/Risk Category (HRC) for the equipment. (2) Nominal system voltage (3) Arc flash boundary Exception: Labels applied prior to September 30, 2011 are acceptable if they contain the available incident energy or required level of PPE. The method of calculating and data to support the information for the label shall be documented.
57 Other New Requirements Hearing protection required for all work inside arc flash boundary. Requires balaclava for all category 2 work. Added arc flash requirements for DC Hazards. Revised Battery Section. New tables and revised tables. New and revised annexes.
58 Next Steps Approved at annual NFPA Meeting Published September, 2011 Implementation
59 Science vs. Real World Testing is done in a controlled environment
60 Science vs. Real World Organizations must view the specific needs/goals unique to their environment Remember the testing done is not real world Molten Splash, Electric Arc, Flash Fire each event is unique.
61 Managing your Protective Clothing Assets A guide to selection of product and process
62 Apparel Selection Criteria Protection value Cost effectiveness Initial cost Life cycle cost Appearance Ease of care Wearer comfort
63 Cost Effectiveness Initial Cost Vs Life Cycle Cost Garment A Initial Cost, $25.00 Average Life Cycle, 1.5 years Total Cost/unit over 3 years, $50.00 Garment B Initial Cost, $45.00 Average Life Cycle, 3 years Total Cost/unit over 3 years, $45.00 Cost savings over 3 years with shirts ea. = $5,000!
64 Treated FR Fabrics Current popular options: FR Cotton Magid, A.R.C. Westex, INDURA ITEX, Banox Certified Breathable 100% Cotton FR Cotton Blends (88/12) Magid, A.R.C. Westex, INDURA UltraSoft ITEX, Banwear Durable 88% Cotton / 12% High Tenacity Nylon
65 Inherently FR Fabrics Current popular options DuPont Nomex Staple in the Refineries Long Life Cycle DuPont Protera Comfortable Durable Moderately priced TenCate Tecasafe Plus Comfortable / Breathable Durable Long Life Cycle
66 New Innovative Fabric Solutions XISPAL
67 PERMANENT PERFORMANCE won t wash or wear out Flame resistant Wicks moisture Dries significantly faster than cotton Skin temperature regulation Soft, natural fiber hand for superior comfort Superior durability UV ratings ranging from 16-48UPF
68 Inherently flame resistant Lightweight fabric Excellent wicking properties Proven fire barrier protection at over 5,000 F (no burn through for over 36 seconds). Resistant to sparks & extreme high-heat splatters.
69 XISPAL 841 RS Flame resistant to molten aluminum Flame resistant to molten iron Arc flash resistant, HRC 2 Inherent FR properties Industrial laundry friendly Shrinkage < 3% All tests done after 50 IL cycles
70 Rent vs. Buy Traditional Rental Programs Direct Purchase Programs Managed Apparel Programs N.O.G Lease and wash
71 Rental Programs No upfront costs Garment replacement included in contract Mending included in the contract Insurance that the garment will be cleaned according to the Manufacturer s guidelines Typically, 3 to 5 year commitment required Under wash?
72 Direct Purchase Programs Complete control of change out to new garment Home washing, employee must take ownership of the wash process Flexibility No contract required No under wash Custom logo enhanced image Up front cost
73 Home Wash vs. Managed Programs N.O.G. (Not Our Goods) Direct purchase with a laundry service added Lease and Wash Leasing contract for the protective apparel from the industrial laundry company Wash program attached to the leasing contract
74 Questions For You To Consider Regarding FR Clothing Who will clean and repair the garments? Do they have necessary laundry instructions? Do they use appropriate FR thread and FR fabrics for repair? What is your policy concerning underwear and FR underwear? Do you prohibit polyester, nylon, & polypropylene synthetics? Do you require that FR clothing always be worn as the outermost layer?
75 Questions To Ask Your FR Garment & PPE Supplier What is your traceability procedure? What are your care & maintenance instructions? What industry standards do your garments & PPE meet? Do you have garments available to address all of the known hazards my employee s will face? What assistance do you provide after the sale?
76 Steps to Establishing your PPE Program Evaluate your environment Identify all hazards Apply standards Select required PPE Review and select your care policy/program. Train your workforce to meet your goals
77 Questions? Craig Howell Director of Clothing Sales Phone: (773) Cell Phone: (248)
78 Thank You
Personal Protective Equipment. OSHA Office of Training and Education 1
Personal Protective Equipment OSHA Office of Training and Education 1 Protecting Employees from Workplace Hazards Employers must protect employees from workplace hazards such as machines, hazardous substances,
More informationPersonal Protective Equipment. OSHA Standard 29 CFR
Personal Protective Equipment 1 Protecting Employees from Workplace Hazards Employers must protect employees from workplace hazards such as machines, hazardous substances, and dangerous work procedures
More informationPersonal Protective Equipment. OSHA Office of Training and Education 1
Personal Protective Equipment OSHA Office of Training and Education 1 Protecting Employees from Workplace Hazards Employers must protect employees from hazards such as falling objects, harmful substances,
More informationPERSONAL PROTECTIVE EQUIPMENT. 60 Minutes
PERSONAL PROTECTIVE EQUIPMENT 60 Minutes AGENDA Assess the workplace for hazards Use engineering and work practice controls Determine and provide PPE for employees Require employees to use necessary PPE
More informationPersonal Protective Equipment. OSHA Office of Training and Education
Personal Protective Equipment OSHA Office of Training and Education 1 Protecting Employees from Workplace Hazards Employers must protect employees from workplace hazards such as machines, hazardous substances,
More informationPersonal Protective Equipment. Protecting Employees from Workplace Hazards. Engineering Controls (cont d) Examples...
1 Personal Protective Equipment Dr. Bassam El Ali 1 Protecting Employees from Workplace Hazards Employers must protect employees from workplace hazards such as machines, hazardous substances, and dangerous
More informationPersonal Protective Equipment
Industrial Safety Series Personal Protective Equipment Dr. Ir. Yulianto S Nugroho, MSc. Department of Mechanical Engineering University of Indonesia Protecting Employees from Workplace Hazards Employers
More informationThis is (Enter Company Name Here) Arc Flash Prevention policy. (Enter Name Here) will be responsible for overall direction of the Safety Program.
Company Name: Policy/Procedure ID Number: 222 Date: Grainger Safety Services Inc. 2012 Arc Flash Prevention Policy This is (Enter Company Name Here) Arc Flash Prevention policy. (Enter Name Here) will
More informationOFFICE OF STATE HUMAN RESOURCES
OFFICE OF STATE HUMAN RESOURCES NUMBER: PPE-1 TOTAL PAGES: 8 SUBJECT: Personal Protective Equipment Program Effective Date: Revision Date: Revision #: RELATED LEGISLATION: The purpose of this program is
More informationPersonal Protective Equipment. Individual Unit Function: Safety Procedure No.: SOP-0147 Page: 1 of 9
Procedure No.: SOP-0147 Page: 1 of 9 1. PURPOSE This procedure describes the minimum requirements concerning personal protective equipment for personnel who are exposed to areas or tasks where hazards
More informationPersonal Protective Equipment
Policies & Procedures Personal Protective Equipment Internal Procedure: PPE Effective Date: 7-30-18 Last Modified: 7-30-18 Approved By: Todd Barnette Purpose To establish requirements for a Personal Protective
More informationElectrical Safety Program
Facilities Operations and Development Environmental Health and Safety 1314 Kinnear Road #106 Columbus, OH 43212-1168 614-292-1284 Phone 614-292-6404 Fax www.ehs.osu.edu Electrical Safety Program Prepared
More informationPERSONAL PROTECTIVE EQUIPMENT
PERSONAL PROTECTIVE EQUIPMENT TYPES OF PERSONAL PROTECTIVE EQUIPMENT Eye Head Hearing Foot Hand Body OTHER CONSIDERATIONS FOR PROTECTION: DRESS FOR THE WEATHER Windbreakers and rain gear Warm socks Warmth
More informationPERSONAL PROTECTIVE EQUIPMENT SAFETY PROGRAM
PERSONAL PROTECTIVE EQUIPMENT SAFETY PROGRAM REGULATORY STANDARD: 29 CFR 1910.132-138. BASIS: This safety program establishes the requirements to ensure protective equipment is provided, where required,
More informationASSOCIATED DOCUMENTS:
Medtronic ENT Rev. C Ref. 9.0 Page 1 of 5 1.0 PURPOSE: 1.1. The personal protective equipment (PPE) program is provided to decrease exposure to job-related hazards. This program identifies responsibilities,
More informationPOWER DELIVERY. Contractor Health & Safety General Terms and Conditions. Appendix B Personal Protective Equipment
Personal Protective Equipment ( PPE ): All PPE worn on IPL job sites must have ANSI and/or approval ratings. Hard hats and safety glasses with side shields (including prescription eyewear) shall be worn
More informationUniversity of Vermont Department of Physical Plant Personal Protective Equipment Program
University of Vermont Department of Physical Plant Personal Protective Equipment Program REVISED AND DISTRIBUTED BY: THE UNIVERSITY OF VERMONT DEPARTMENT OF PHYSICAL PLANT TRAINING AND COMPLIANCE OFFICE
More informationPersonal Protective Equipment
Personal Protective Equipment 10-hour General Industry Outreach Training 1 Introduction Source of photos: OSHA 2 Introduction Lesson objectives: 1. Describe the hierarchy of controls as it relates to personal
More informationPPE PERSONAL PROTECTIVE EQUIPMENT PROGRAM
PPE PERSONAL PROTECTIVE EQUIPMENT PROGRAM April 2017 CONTENTS Section 1: Introduction... 1 Section 2: Purpose...1 Section 3: Roles and Responsibilities... 2 Section 4: Hazard Assessment and Equipment Selection...
More informationHealth, Safety, Security and Environment
Document owner and change code Document Owner Aaron Perronne Title HSSE Manager Mark X Change Code Description X N/A First Issue A Typographical/Grammatical correction; formatting change; text clarification-no
More informationEnvironmental Health & Safety Policy Manual
Environmental Health & Safety Policy Manual Issue Date 8/24/2009 Updated: 5/8/2018 Policy # EHS-400.03 Personal Protective Equipment 1.0 PURPOSE: In order to protect the health of employees and students,
More informationPersonal Protective Equipment Program
Personal Protective Equipment Program Document History Version Date Comments 0.1 June, 2017 Pinnacle Draft 0.2 August, 2017 FM-OHS Internal Review 1.0 November, 2017 Final Version Table of Contents Definitions...
More informationPERSONAL PROTECTIVE EQUIPMENT
13.0 The purpose of this program is to ensure that, where applicable, the appropriate and necessary personal protective equipment (PPE) is selected and provided to employees to protect from illness or
More informationAppendix A: Energized Work Permit
Appendix A: Energized Work Permit Part I: To be completed by the Supervisor Description of Circuit & Equipment: Job Location: Description of Work to Be Done: Justification of why the circuit cannot be
More informationManagement Plan for Electrical Safety ISD #535
Management Plan for Electrical Safety ISD #535 Health & Safety Office Maintenance Service Building 10 SE 9 ½ Street Rochester, MN 55904 507-328-4507 MANAGEMENT PLAN FOR ELECTRICAL SAFETY Table of Contents
More informationEffective Date: 24-April-2017 Version: 6 Page: 1 of 8 TITLE: SAF-370, PERSONAL PROTECTIVE EQUIPMENT GUIDELINES. Table of Contents
24-April-2017 Version: 6 Page: 1 of 8 Table of Contents 1.0 Introduction... 2 1.1 Purpose... 2 1.2 Scope... 2 1.3 Definitions... 2 1.4 Responsibilities... 3 Environmental Health and Safety Office (EHSO),
More informationPersonal Protective Equipment
Personal Protective Equipment 6500-2.0 Associated OHS Process: General Industry and Construction Safety The master copy of this document resides in electronic format. Printed copies of this document are
More informationDoc #: 1000-AD Revision: - PERSONAL PROTECTIVE EQUIPMENT (PPE) SOP. Author(s): T. Lavoie/ M. Saucedo/ J. Dunlop/ Mtn.
Doc #: 1000-AD-015-0008 Revision: - PERSONAL PROTECTIVE EQUIPMENT (PPE) SOP Author(s): T. Lavoie/ M. Saucedo/ J. Dunlop/ Mtn. Supervisor TABLE OF CONTENTS REVISION HISTORY... 3 1.0 INTRODUCTION... 4 2.0
More informationPROTECTIVE CLOTHING FOR BREWERY WORKERS
PROTECTIVE CLOTHING FOR BREWERY WORKERS Best Management Practice for the Selection of Protective Clothing for Brewery Workers Presented By David Currier & Reva Golden Safety Subcommittee Agenda Hierarchy
More informationNorthern Kentucky University Issue Date: 11/02/2018 Revised Date: Title: PERSONAL PROTECTIVE EQUIPMENT PROCEDURE OBJECTIVE AND PURPOSE
Northern Kentucky University Issue Date: 11/02/2018 Revised Date: Policy Link: Occupational Safety Policy Title: PERSONAL PROTECTIVE EQUIPMENT PROCEDURE OBJECTIVE AND PURPOSE The objective of this procedure
More informationENVIRONMENTAL HEALTH AND SAFETY PERSONAL PROTECTIVE EQUIPMENT
ENVIRONMENTAL HEALTH AND SAFETY PERSONAL PROTECTIVE EQUIPMENT PERSONAL PROTECTIVE EQUIPMENT Table of Contents A. Scope... 1 B. General Requirements... 1 C. Responsibility... 1 1. Supervisor... 1 2. Department
More informationPersonal Protective Equipment
Personal Protective Equipment 1 What is PPE? Equipment worn by a person that is designed to prevent injury or illness from a specific hazard. 2 Before PPE Engineering Controls Sound insulation Guards Ventilation
More informationScarborough Fire Department. Personnel Protection Equipment
Scarborough Fire Department Personnel Protection Equipment All personal protection equipment used in the Scarborough Fire Department meets or exceeds the required standards in NFPA 1500, Standard On Fire
More informationPAGE 1 OF 8 HEALTH, SAFETY & ENVIRONMENTAL MANUAL PROCEDURE: S150 Personal Protective Equip. Procedure REV 5.0 8/16/2012
PAGE 1 OF 8 PURPOSE: PERSONAL PROTECTIVE EQUIPMENT PROCEDURE The proper use of Personal Protective Equipment (PPE) is an integral part of a comprehensive Health, Safety and Environmental management program.
More informationPERSONAL PROTECTIVE EQUIPMENT
C H A P T E R 9 PERSONAL PROTECTIVE EQUIPMENT 9.1. General Personal protective equipment (PPE) when properly used and maintained saves lives and reduces injury and illness. PPE includes equipment for eyes,
More informationElectrical Safety Program
Electrical Safety Program The University Of Iowa Environmental Health & Safety 122 Grand Avenue Court Iowa City, IA 52242-1000 Phone: 319-335-8501 Date Revised/Reviewed: 6/8/2018 Table of Contents 1. Summary...
More informationPersonal Protection Program
SCOPE AND APPLICATION The objective of the Personal Protective Equipment (PPE) Program is to protect Antioch College employees from the risk of injury by creating a barrier against workplace hazards. PPE
More informationPersonal Protective Equipment
Northland Community & Technical College June 1, 2017 Personal Protective Equipment Safety Officer Cory Feller Chemical Hygiene Officer Kristel Kizer Telephone: 218-683-8633 1 Personal Protective Equipment
More informationLeader s Guide ERI Safety Videos
1717 SAFE ELECTRICAL WORK PRACTICES & THE 2018 NFPA 70E Leader s Guide ERI Safety Videos SAFE ELECTRICAL WORK PRACTICES & THE 2018 NFPA 70E This easy-to-use Leader s Guide is provided to assist in conducting
More information75 Years of Health and Safety Guidance
H&S Guide: 60 Working Risks Personal Protective Equipment Personal Protective Equipment (also known as PPE) Employers have duties concerning the provision and use of personal protective equipment at work.
More informationPERSONAL PROTECTIVE EQUIPMENT
0 PERSONAL PROTECTIVE EQUIPMENT Supplement to Standard Training Module TRAINING REQUIREMENTS OVERVIEW This standard Vivid training module provides a general overview of Personal Protective Equipment (PPE).
More informationPersonal Protective Equipment
Personal Protective Equipment 1 A. Introduction Personal Protective Equipment Program Harford Community College is dedicated to providing safe and healthful facilities for all employees and students and
More informationCompliance Requirements
Compliance Requirements The compliance requirements for OSHA s Personal Protective Equipment regulations are very straightforward, and logical. GENERAL REQUIREMENTS (29 CFR 1910.132) The general OSHA Personal
More informationPERSONAL PROTECTIVE EQUIPMENT PROGRAM INTERNAL AND EXTERNAL PAGE: 1 DEPARTMENT: ALL OF: 5
INTERNAL AND EXTERNAL PAGE: 1 1.0 OBJECTIVE The Federal Occupational Safety and Health Administration (OSHA) requirements for personal protective equipment (PPE) are presented in 29 CFR 1910.132 General
More informationIdentify, evaluate and assess workplace improvements to reduce hazards. Provide personal protective equipment based on hazard assessment
PAGE 1 OF 7 1.0 INTRODUCTION The purpose of this program is to help employees work safely in their environments by identifying and assessing workplace hazards, eliminating or reducing the hazards where
More informationOpen toed shoes, sandals, or shoes made of loosely woven material should not be worn in the laboratory.
JEFFERSON COMMUNITY AND TECHNICAL COLLEGE SAFETY MANUAL SECTION VIII: LABORATORY SAFETY EFFECTIVE: JULY 1, 2009 TOPIC VIII 0050: LABORATORY ATTIRE AND REVISED: PERSONAL PROTECTIVE EQUIPMENT PROPER ATTIRE
More informationPART 4: IMPLEMENTATION & OP
TITLE PART 4: IMPLEMENTATION & OPERATION Prepared by: 4.2 Personal Protective Equipment (PPE) Learning Objectives To define what is Personal Protective Equipment (PPE). To describe the management & legal
More informationPersonal Protective Equipment
Purpose Personal Protective The purpose of this policy is to meet the minimum standard for Personal Protective (PPE) for Apache Corporation employees and contract personnel working at Apache Corporation
More informationMISSOURI UNIVERSITY OF SCIENCE & TECHNOLOGY Procedure: 3.6
Procedure This electrical safety procedure structures safety procedures to meet the requirements of the NFPA-70E Standard. The program is designed for qualified employees who occasionally must perform
More informationPersonal Protective Equipment
Personal Protective Equipment Employee Protection Protecting employees from workplace hazards: Workplace hazards such as sharp edges, falling objects, flying particles, chemicals, noise and many other
More informationProgressive Safety Services LLC - All Rights Reserved
Estimated that 2,000 workers are treated in specialized burn centers each year as a result of arc flash (Electrical Safety Foundation International). According to the National Safety Council, medical costs
More informationPERSONAL PROTECTIVE EQUIPMENT (PPE)
PERSONAL PROTECTIVE EQUIPMENT (PPE) OSHA requires certain PPE based on the hazards employees are exposed to. OSHA also requires training for employees in the proper selection, use, and maintenance of PPE.
More informationChapter 16 - Protective Equipment
Chapter 16 Protective Equipment Chapter 16 - Protective Equipment Introduction Hayward Electric will provide suitable equipment to protect employees from hazards in the workplace. The Responsible Safety
More informationPersonal Protective Equipment (PPE)
The University of Maryland Center for Environmental Science recognizes that certain job activities require employees to be at risk for injuries and fatalities and that personal protective equipment will
More informationDUQUESNE UNIVERSITY PERSONAL PROTECTIVE EQUIPMENT (PPE) PROGRAM
DUQUESNE UNIVERSITY PERSONAL PROTECTIVE EQUIPMENT (PPE) PROGRAM Prepared by: Environmental Health and Safety Department TABLE OF CONTENTS Page Purpose 1 Scope 1 Hazard Assessment 2 Selection Guidelines
More informationPrint PERSONAL PROTECTIVE EQUIPMENT
Print PERSONAL PROTECTIVE EQUIPMENT MODULE DESCRIPTION This module will cover how to be as safe as possible when working in an area where you may need personal protective equipment (PPE). OBJECTIVES After
More informationNECA Personal Protective Equipment (PPE) Selector
NECA Personal Protective Equipment (PPE) Selector Objectives Explain why electrical contractors should follow the precautions set forth in NFPA 70E List the hazards which demonstrate why an arc flash risk
More informationElectrical Safety Program
Electrical Safety Program For Adopted LC-1005 Rev. 06/16 Page 1 I. Introduction As part of Organization s overall safety and health program, an
More informationHAZARDOUS WASTE OPERATIONS AND EMERGENCY RESPONSE PLAN Kenyon College
HAZARDOUS WASTE OPERATIONS AND EMERGENCY RESPONSE PLAN Kenyon College PURPOSE The purpose of this Emergency Response Plan is to plan for and execute an organized response to hazardous waste spills or releases
More informationPPE and Tools PPE and Tools
PPE and Tools PPE and Tools PPE Definition Personal protective equipment (PPE) refers to protective clothing, helmets, goggles, or other garments or equipment designed to protect the wearer's body from
More informationThe Pennsylvania State University Energized Electrical Safety Program
Introduction: The Pennsylvania State University Energized Electrical Safety Program Purpose: Electricity is a serious workplace hazard, capable of causing both employee injury and property damage. It is
More informationTitle: Personal Protective Equipment. University Division/Department: Environmental Health & Safety Effective Date: Revised:
Page: 1 of 14 Table of Contents I. Purpose 2 II. Scope 2 III. Definitions 2 IV. Policy Statement 2 V. Procedure 4 VI. Related Information 7 VII. History 14 VIII. Responsible University Division/Department
More informationGeneral Requirements for Personal Protective Equipment
3.10.1 OVERVIEW This section describes procedures for ensuring that employees, students and visitors are protected from hazards through the use of personal protective equipment (PPE). (WAC 296-800-160)
More informationSelection of Electrical PPE Tables
Selection of Electrical PPE Tables Instructions Table 1 - Starting with Table 1, select the task you plan to do (right-hand column) and the condition of the equipment you will be working on, (center column).
More informationPersonal Protective Equipment
Personal Protective Equipment General This section addresses eye, face, head, hand and foot protection. respiratory and hearing protection. Separate programs exist for Employees will be provided personal
More informationBig Ox Energy - Siouxland LLC. Safety Management System. Authority: President
Issuing Dept: Safety Page: Page 1 of 5 Purpose For safe operation, Big Ox Energy - Siouxland LLC requires that all employees and contractors use and wear (Personal Protective Equipment) as set out in our
More informationTurnout gear is comprised of boots, coat, pants, suspenders, hood, gloves, helmet, and SCBA Facepiece.
Purpose: Turnout gear is a vital piece of personal protection for every member of the Fire Department. The City of Bryan Fire Department will provide its members with protective clothing and equipment
More informationSECTION 51 NFPA 70E POLICY. Health & Safety Policy and Procedures Manual
SECTION 51 NFPA 70E POLICY Health & Safety Policy and 1. Protection Against Arc Flash A. Policy: An arc flash is a dangerous condition associated with the release of energy caused by an electric arc. An
More informationElectrical & Arc Flash Safety Program 2007
University of Louisville Physical Plant Department Electrical & Arc Flash Safety Program 2007 Introduction Electricity is a serious workplace hazard, capable of causing both employee injury and property
More informationChapter 5 Personal Protective Equipment (PPE)
Chapter 5 Personal Protective Equipment (PPE) OVERVIEW: This chapter provides information about specific items and/or categories of personal protective equipment used to protect and shield you from injury
More informationArc Flash 101. presented by Arc Flash Blaster LLC
Arc Flash 101 presented by Arc Flash Blaster LLC ARC FLASH? ARC FLASH INCIDENT STANDARDS AND REGULATIONS Arc flash accidents... 35,000 F Molten Metal Pressure Waves Sound Waves Copper Vapour: (Solid to
More informationIWU PHYSICAL PLANT SAFETY PROGRAM. Revision: 1 ELECTRICAL SAFETY Section: 4
STANDARDS Title 29 Code of Federal Regulations (CFR) Part 1910 Subpart S 301-399; NFPA 70E 2012 1.0 INTRODUCTION Electricity is a serious workplace hazard, capable of causing both employee injury and property
More information14. Personal Protection Chapter , WAC
14. Personal Protection Chapter 296-800-160, WAC 1.0 Introduction PLU will provide most required personal protective equipment (PPE). The employee may be required to provide PPE that is of a personal nature
More informationAdopted by Common Council 01/09/01
STOUGHTON STREET DEPARTMENT SAFETY COMPLIANCE PROGRAM MANUAL Program Name Personal Protective Equipment Procedure No. N/A Regulatory Reference OSHA 29 CFR 1910.133,.135,.136,.137 and.138, as adopted by
More informationPersonal Protective Equipment
TRENT UNIVERSITY Personal Protective Equipment A guide to the use of PPE in the lab TrentEmployee 4/2/2013 [Type the abstract of the document here. The abstract is typically a short summary of the contents
More information2017 NWHA TECHNICAL SEMINAR. Arc Flash Hazard Awareness MIKE BRENDLE LLC
2017 NWHA TECHNICAL SEMINAR Arc Flash Hazard Awareness WHAT IS ARC FLASH Arc Flash is a short circuit that flashes from one exposed live part to another, or to ground The result is ionized air that creates
More informationTOOL BOX TALK NO3. Use of P.P.E
Combined Technical Solutions Ltd TOOL BOX TALK NO3. Use of P.P.E OBJECTIVE: Why PPE is important and why it should be looked after Personal Protective Equipment is intended to protect you from risks, which
More informationDefinitions found in several locations:
Definitions found in several locations: NFPA 70 - National Electric Code NFPA 70B Recommended Practice for Electrical Equipment Maintenance. NFPA 70E Electrical Safety in the Workplace OSHA 1910 Subpart
More informationPERSONAL PROTECTIVE EQUIPMENT FOR CHEMICAL EXPOSURES
Page 1 of 5 1.0 PURPOSE: Use of an appropriate ensemble of personal protective equipment (PPE) creates a second line of defense against exposure to hazardous chemicals. Engineering controls, such as fume
More information2012 NFPA 70E: Electrical Safety In The Workplace
ERI Safety Videos Preventing Injuries Through Employee Training 2984 2012 NFPA 70E: Electrical Safety In The Workplace Leader s Guide ERI Safety Videos 2012 NFPA 70E: Electrical Safety In The Workplace
More informationCHAPTER 4 Personal Protective Clothing
CHAPTER 4 Personal Protective Clothing Objective: The purpose of this safety policy and procedure is to eliminate or minimize Washington State Department of Transportation exposure to work hazards. Scope:
More informationto the 2009 Edition Standards & Codes Introduction Background Byron Jordan Sr. Field Engineer
Critical Changes to the NFPA 70E Standard Standards & Codes Note 2 Byron Jordan Sr. Field Engineer Introduction Since its inception in 1979, NFPA 70E: Standards for Electrical Safety in the Workplace has
More information1.1 Employees are required to wear mandatory and area / task specific PPE.
1 PERSONAL PROTECTIVE EQUIPMENT (PPE) PPE is defined as all equipment which is intended to be worn or held by a person at work and which protects them against one or more risks to his health or safety.
More informationPersonal protective equipment required 6.1 An employer must ensure that a worker wears and uses personal protective equipment at the following times:
PART 6 PERSONAL PROTECTIVE EQUIPMENT GENERAL Personal protective equipment required 6.1 An employer must ensure that a worker wears and uses personal protective equipment at the following times: (a) when
More informationJoint Pool Policy on Personal Protective Equipment Usage
Joint Pool Policy on Personal Protective Equipment Usage The purpose of this policy is to establish guidelines for usage of personal protective equipment (PPE) for county employees having an occupational
More information"PERSONAL PROTECTIVE EQUIPMENT"
PRESENTER'S GUIDE "PERSONAL PROTECTIVE EQUIPMENT" Training for the OSHA PERSONAL PROTECTIVE EQUIPMENT STANDARDS Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS
More informationDickinson College. Personal Protective Equipment Program
Dickinson College Personal Protective Equipment Program August 10, 2006 Table of Contents I. Introduction A. Scope B. Application II. III. IV. Responsibility A. President of Dickinson College/Vice President
More informationARC FLASH HAZARD ANALYSIS
I. ARC FLASH HAZARD ANALYSIS IS REQUIRED ARC FLASH HAZARD ANALYSIS By Mike Lang Principal Field Engineer OSHA s 29 CFR Part 1910.132(d) states: The employer shall assess the workplace to determine if hazards
More informationPersonal Protective Equipment Manual Office of Environmental Health & Safety East Carolina University
Personal Protective Equipment Manual Office of Environmental Health & Safety East Carolina University 211 S Jarvis Street, Suite 102, Greenville, NC 27858 Telephone: 252-328-6166 April, 2016 Table of Contents
More informationINTERNATIONAL LIFE SAVING FEDERATION LIFESAVING POSITION STATEMENT - LPS 19 USE OF PERSONAL PROTECTIVE EQUIPMENT (PPE)
World Water Safety INTERNATIONAL LIFE SAVING FEDERATION Gemeenteplein 26 3010 Leuven Belgium Tel: +32 16 89 60 60 E-mail: ils.hq@telenet.be - Web: www.ilsf.org LIFESAVING POSITION STATEMENT - LPS 19 USE
More informationSample Hazard Assessment and PPE Plan
Sample Hazard Assessment and PPE Plan OSHA requires employers to assess their workplace to determine if any actual or potential hazards require the use of personal protective equipment (PPE). The regulations
More informationRequired Personal Protective Equipment (PPE) Checklist
Required Personal Protective Equipment (PPE) Checklist When hazards are present, PPE is a necessity. PPE is clothing that is designed to protect the worker's body against occupational and safety hazards.
More informationSUNY Cortland Environmental Health and Safety Office Personal Protective Equipment Program
SUNY Cortland Environmental Health and Safety Office Personal Protective Equipment Program Inception Date: Not Specified Latest Revision/Review Date: August 2, 2018 Previous Revision/Review Date: June
More informationSelection, use, care and maintenance it s the law?????
Selection, use, care and maintenance it s the law????? Demystifying the Selection, Use, Care & Maintenance of FR/AR Clothing The proper selection of PPE is very important. Even though the thermal hazards
More informationTAMPA ELECTRIC COMPANY ENERGY SUPPLY PERSONAL PROTECTIVE EQUIPMENT PROGRAM
TABLE OF CONTENTS TITLE PAGE # PURPOSE / INTRODUCTION 1 RESPONSIBILITY 1 EMPLOYEE TRAINING 2 METHODS OF CONTROL / HAZARD ASSESSMENT 3 SELECTION AND USE 4-9 DOCUMENTATION AND RECORDKEEPING 10 PROGRAM PERIODIC
More informationOKLAHOMA CITY COMMUNITY COLLEGE PERSONAL PROTECTIVE EQUIPMENT PROGRAM. Environmental Health and Safety
OKLAHOMA CITY COMMUNITY COLLEGE PERSONAL PROTECTIVE EQUIPMENT PROGRAM Environmental Health and Safety Reviewed and Revised: August 28, 2008 Reviewed and Revised: August 6, 2010 Reviewed and Revised: September
More informationSelection, Care and Use of Chemical Protective Clothing. Jason Cole Director of R&D Kappler, Inc.
Selection, Care and Use of Chemical Protective Clothing Jason Cole Director of R&D Kappler, Inc. Introduction OSHA Low Hanging Fruit Top Violations of OSHA Regulations # 1 - Failure to Perform Hazard Assessment
More informationBauman Machine Inc. PERSONAL PROTECTIVE EQUIPMENT PROGRAM TABLE OF CONTENTS
Bauman Machine Inc. PERSONAL PROTECTIVE EQUIPMENT PROGRAM TABLE OF CONTENTS I. INTRODUCTION.......................................................... 1 II. SCOPE....................................................................
More information"PERSONAL PROTECTIVE EQUIPMENT IN CONSTRUCTION ENVIRONMENTS"
MAJOR PROGRAM POINTS "PERSONAL PROTECTIVE EQUIPMENT IN CONSTRUCTION ENVIRONMENTS" Part of the "CONSTRUCTION SAFETY KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR
More informationEnvironmental Safety & Health PPE. Chapter 16: Personal Protective Equipment. Chapter 16: PPE. By: Dr. Magdy Akladios 1
Environmental Safety & Health Chapter 16: Personal Protective Equipment By: Magdy Akladios, PhD, PE, CSP, CPE, CSHM PPE What is the purpose of protective gear? 3 By: Dr. Magdy Akladios 1 Protecting Employees
More information