INSTALLATION INSTRUCTIONS
|
|
- Ernest Parsons
- 6 years ago
- Views:
Transcription
1 INSTALLATION INSTRUCTIONS For Propane to Natural Gas Conversion Kit Model No: NAHA001NG or Part ( ) CONVERT Series N8MPN/L B 50, 75, 100, 125 *8MPN/L B 50, 75, 100, 125 *8MPN B 150 *8DNL B 50, 75, 100, 125 H8UH5, MUF, HL C 50, 75, 100, 125, 140 N9MPD A 50, 75, 100, 125 *9MPD C 50, 75, 100, 125 NOT FOR USE ON N9MP1 C 40, 60, 80 N9MP2 C 80 N9MPD A 40, 60, 80 *9MPD C 80 *9UHX A 60, 80, 100 use NAHA004NG ( ) * Denotes Brand (T, H or C) SAFETY REQUIREMENTS Installing and servicing heating equipment can be hazardous due to gas and electrical components. Only trained and qualified personnel should install, repair, or service heating equipment. Untrained service personnel can perform basic maintenance functions such as cleaning and replacing air filters. All other operations must be performed by trained service personnel. When working on heating equipment, observe precautions in the literature, on tags, and on labels attached to or shipped with the furnace and other safety precautions that may apply. Follow all safety codes. In the United States, follow all safety codes including the National Fuel Gas Code (NFGC) ANSI Z /NFPA In Canada, refer to the National Standard of Canada Natural Gas and Propane Installation Code (NSCNGPIC) CAN/CGA -B149.1 and Wear safety glasses and work gloves. Have fire extinguisher available during Start -up, Adjustment steps, and service calls. Recognize safety information. This is the safety -alert symbol!. When you see this symbol on the furnace and in instruction manuals be alert to the potential for personal injury. Understand the signal words DANGER, WARNING, or CAUTION. These words are used with the safety -alert symbol. DANGER identifies the most serious hazards, those that will result in severe personal injury or death. WARNING signifies a hazard that could result in personal injury or death. CAUTION is used to identify unsafe practices that may result in minor personal injury or product and property damage. Note is used to highlight suggestions that will result in enhanced installation, reliability, or operation. This conversion kit shall be installed by a qualified service agency. Please read these instructions completely before attempting installation. Consult gas supplier and tables in National Fuel Gas Code NFPA 54/ANSI Z223.1, 2006 or latest edition. In Canada, the National Standard CAN/CGA B149.1 and B Parts List Description Part# Qty. Burner # Honeywell Conv. Kit # Label, Field Conversion Label, Nat Conversion Label, Derate Instructions 1 s for 40k, 60k, 80k, *9UHX and alternate input unit conversion (see unit Installation Instructions to determine if model may use alternate input) (Not included in kit) (Refer to Table 3 - for required orifice) Burner # as required s for High Altitude Conversion (Not included in kit) (Refer to Table 2 - for required orifice) (Refer to Table 3 - for Alternate Input or 80,000 required orifice) Burner # as required Burner # as required Burner # as required Burner # as required Burner # as required! WARNING FIRE, EXPLOSION, ELECTRIC SHOCK, AND CARBON MONOXIDE HAZARD. This conversion kit shall be installed by a qualified service technician in accordance with the Manufacturer s instructions and all applicable codes and requirements of the authority having jurisdiction. If the information in these instructions is not followed exactly, a fire, an explosion or production of carbon monoxide could result causing property damage, personal injury or loss of life. The qualified service agency is responsible for the proper installation of this kit. The installation is not proper and complete until the operation of the converted appliance is checked as specified in the manufacturer s instructions supplied with the kit. AVERTISSMENT Cette trousse de conversion doit être installée par un service d entretien, selon les instructions du fabricqualifiéant et selon toutes les exigences et tous les codes pertinents de l autorité compétente. Assurezvous de bien suivre les instructions dans cette notice pour réduire au minimum le risque d incendie, d explosion ou la production de monoxyde de carbone pouvant causer des dommages matériels, des blessures ou la mort. Le service d entreien qualifié estresponsable de l installation de cette trousse. L installation n est pas adéquate ni compléte tant que le bon fonctionnement de l appareil convertin a pas été vérifié selon les instructions du fabricant fournies avec la trousse. June 2007
2 General Information This kit is for conversion of furnaces equipped with Single StageHoneywell VR8205S Series gas valves from propane gas to natural gas. Before the furnace can be operated with natural gas, the low inlet pressure switch must be removed. A gas valve conversion kit must be installed and main burner orifices must be replaced with orifices in this kit or with properly sized orifices for high altitude or alternate input ordered separately. The orifices provided in this kit are stamped to indicate the size (twist drill number). The parts list specifies the size orifices supplied in the kit. Compare the size marking on the orifices with the sizes as listed in the parts list. Make sure you have the correct main burner orifices. Extreme care is used to assure that this kit contains the proper orifices. Oversized orifices could result in hazardous conditions, especially if the venting is inadequate. For that reason, we recommend that the installer check the size of the orifice with a new twist drill of the correct size. This procedure assures that the orifices provided are the correct size. Installation! WARNING ELECTRIC SHOCK, FIRE AND EXPLOSION HAZARD. Failure to follow this warning could result in personal injury, death, equipment damage, and/or property damage. Turn OFF gas supply at manual gas valve before turning OFF electric power supply and starting conversion. Turn OFF electric power supply at disconnect switch or service panel before starting conversion. Disassembly Refer to Figure 1 and the following steps. 1. After disconnecting power and gas supply to the furnace, remove the access door, exposing gas valve and burner compartment. 2. Disconnect the yellow wire harness from the two terminals on the Propane switch, the air pressure switch, and furnace harness. 3. Reconnect yellow furnace harness wire to air pressure switch. See furnace wiring label. 4. Disconnect gas line from fitting assembly so manifold assembly can be removed. 5. Disconnect wiring at gas valve. Be sure to note the proper location of any and all electrical wiring disconnected. 6. Remove the four (4) screws holding the manifold and gas valve to the manifold supports. Do Not discard any screws. 7. Carefully remove the manifold assembly and remove fitting assembly from the gas valve. 8. Unscrew the Propane pressure switch from the bushing. Figure 1 Disassembly N9MP1, N9MP2 N9MPD&*9MPD N8MPN, N8MPL *8MPN, * 8MPL & *8DNL OFF ON Changing Main Burner s 1. Remove the Propane (silver) orifices burner orifices from the manifold assembly and replace them with the Natural gas (brass) furnished in the conversion kit or called out in Table 2 or Table 3. (See Figure 2). 2. Tighten the orifices so they are seated and gas tight about 1 1 / 8 (28.2 mm) from the face of the orifice to the back of the manifold pipe (Figure 3). Make sure orifice is installed straight so that it forms a right angle (90 ) to the manifold. Figure 2 Remove s
3 Figure (28.2mm) 1.21 (30.8mm) Changing s Measure from face of orifice to the back side of the manifold. In the USA, for furnaces fired on full rate, the input rating for altitudes above 2000 (8,000 for 80,000 and alternate input) must be derated by 2% for each 1000 above sea level (see Table 2 and Table 3) In Canada, the input rating for altitudes above 2000 (8,000 for 80,000 ) must be reduced by 5% for altitudes of 2000 to 4500 above sea level. Use the 2001 to 3000 column in Table 2 and Table 3. Alternate Input Ratings (USA Only) High Altitude Installation Gas input rate on the furnace rating plate is for installation at up to The #42 burner orifices supplied in this kit are sized for Natural Gas at full rate ONLY, for use between elevation.do not use them above 2000 (except when noted by Table 2 or Table 3). s for conversion at high altitude and alternate input must be ordered from Service Parts. CAUTION: See furnace Installation Instructions to verify that model could be converted to alternate input. The input rating of these furnaces can be changed from the standard input rating to the alternate input rating shown in Table 1, by changing the main burner orifices. Changing of burner orifices MUST be done by a qualified service technician. See section on changing orifices. Table 1 Alternate Input Ratings, USA ONLY. Standard Input: Units may be installed at full input rating (25,000 per heat exchanger) when installed at altitudes up to ,000 model and Alternate Input (Conversions): Units may be installed at full input rating (20,000 per heat exchanger) when installed at altitudes up to See furnace Installation Instructions to determine if alternate input conversion is permitted. Standard Rating Alternate Rating Natrual Gas * 50,000 40,000 #44 75,000 60,000 #44 100,000 80,000 #44 125, ,000 #44 *See Table 3 for High Altitude MANIFOLD PRESSURE AND ORIFICE SIZE FOR HIGH ALTITUDE APPLICATIONS Table 2 HEATING VALUE at ALTITUDE BTU/CU. FT. NATURAL GAS MANIFOLD PRESSURE (in wc) 25,000 per burner Except 90% 40k, 60k, 80k models and alternate input ratings 0to to 3000 MEAN ELEVATION FEET ABOVE SEA LEVEL 3001 to to to to to Conversion:1inwc=.25kPa NOTE: Natural gas data is based on 0.60 specific gravity. For fuels with different specific gravity consult the National Fuel Gas Code ANSI Z /NFPA or National Standard of Canada, Natural Gas And Propane Installation Code CSA B NOTE: Bold number indicates factory shipped size. 3
4 Table 3 HEATING VALUE at ALTITUDE BTU/CU. FT. NATURAL GAS MANIFOLD PRESSURE (in wc) 20,000 per burner FOR THE 90% 40k, 60k, 80k model and alternate input ratings 0to to 3000 MEAN ELEVATION FEET ABOVE SEA LEVEL 3001 to to to to to Conversion: 1inwc=.25kPa NOTE: Natural gas data is based on 0.60 specific gravity. For fuels with different specific gravity consult the National Fuel Gas Code ANSI Z /NFPA or National Standard of Canada, Natural Gas And Propane Installation Code CSA B NOTE: Bold number indicates factory shipped size. NOTE: In the USA, for furnaces fired on full rate, the input rating for altitudes above 2000 (8,000 for 80,000 and alternate input) must be derated by 2% for each 1000 above sea level (see Table 2 and Table 3). In Canada, the input rating for altitudes above 2000 (8,000 for 80,000 ) must be reduced by 5% for altitudes of 2000 to 4500 above sea level. Use the 2001 to 3000 column in Table 2 and Table 3. Figure 4 Typical Gas Control Valve Gas Valve Conversion Conversion of Honeywell VR8205S Gas Valve using Natural Gas Conversion Kit# Remove the regulator cap screw and pressure regulator adjusting screw. (See Figure 4 and Figure 5) INLET Regulator Adjustment Under Cap V T HONEYWEL L Outlet Tap 1 / 8 NPT 2. Remove the existing regulator spring from the regulator housing. 3. Insert the replacement spring (silvercolor) contained in this kit into regulator housing. 4. Install the pressure regulator adjusting screw and give it six (6) full turns. This will set the manifold pressure close to required setting for normal operation. 5. Replace the regulator cap screw. 6. Attach the Caution Label contained in the kit to the Gas Valve where it can be readily seen. If Propane Conversion Label is already there, replace with new Natural Gas Caution Label. Inlet Tap 1 / 8 NPT Regulator Adjustment Under Cap INLET Inlet Tap 1 / 8 NPT IN HONEYWELL OFF ON OFF ON OUTLET a Outlet Tap 1 / 8 NPT OUTLET 4
5 Figure 5 Spring Typical Regulator Assembly Regulator Adjusting Screws Do NOT allow minimum gas supply pressure to vary downward. Doing so will decrease input to furnace. Refer to Table 4 for gas supply and manifold pressures. Table 4 Gas Type Gas s (in wc) Supply Recommended Max. Min. Natural * * SeeTable 2 or Table 3 conversion: 1 in wc =.25 kpa Important Notes Measured input can NOT exceed rated input. Any major change in gas flow requires changing burner orifice size. Propane Gas Color Code For Natural Gas Regulator Black Black Adjusting Screw Spring Red Stainless Steel Reassembly Reassemble all parts in reverse order as removed. Attach Natural Gas Conversion Label next to the furnace rating plate or to the front exterior of the furnace. If Propane Gas Conversion Label is there replace with Natural Conversion Label. Assembly -- Be sure to engage the main burner orifices in the proper openings in the burners. Verify the ignitor is in the correct location. (See Figure 6) Testing for leaks -- After reassembly, turn the gas on and check all joints for gas leaks using a soapy solution. All leaks must be repaired immediately. Figure 6 5 / 16 (8) 2 1/ 16(52.39) Ignitor Location in(mm) 1 / 4 (6.4) NOTE: Flame sensor has a different orientation in all 050 and alternate 040 input models. Gas Gas input to burners MUST NOT exceed the rated input shownonratingplate. Start -up and Check -out 1. Remove the plug from the Inlet Tap on gas valve and install a manometer. (SeeFigure 4) 2. Open manual gas line valve to unit. Check for gas leaks and correct as necessary. Check supply pressure, 7 in wc recommended, 4.5 in wc minimum, 14 in wc maximum. If not within these limitations DO NOT OPERATE FURNACE, contact gas supplier. 3. Close manual gas line valve to unit, remove manometer and replace inlet pressure tap plug. Gas Valve Adjustment 1. With the gas valve knob or switch in the OFF position, remove the pressure tap plug from the outlet end of the valve, and connect a U tube manometer to the pressure port. (Figure 4) 2. Turn the gas valve knob or switch to the ON position and restore electrical power to unit. Cycle the main burner on and off several times to stabilize the pressure regulator diaphragm. This MUST be done before an accurate pressure reading can be obtained. 3. With the main burner on, read the pressure gauge. For appropriate reading see Table 2 or Table 3. Turn pressure regulator adjusting screw clockwise to increase or counterclockwise to decrease manifold pressure. Burner Input must not exceed nameplate rating. Refer to Section Checking Input Rate. 4. Turn gas valve to OFF. Remove the pressure gauge and replace the pressure tap plug and pressure regulator cap screw. 5.. Start the main burners and check pressure tap plug for gas leaks. 6. With gas valve on, observe furnace through two or more complete cycles to be sure all controls are operating. Checking Input Rate Checking Burner Input Using A Meter To check the BTU input rate, the test hand on the meter should be timed for at least one revolution and the input determined from this timing. Refer to Section 11, Table II.I.1 of the National Fuel Gas Code for converting test hand readings to cubic feet per hour. Natural Gas BTU Content Example: Example of Seconds Per Hour Cubic Feet Per Hour BTU Per Hour 1,000 3, ,000 1,000 BTU x 3,600/48 = 75,000 BTU/hour 5
6 *High Altitude Input Rate = Nameplate Sea Level Input Rate x (Multiplier) Elevation High Altitude Multiplier Natural Gas* Standard Input High Altitude Multiplier Natural Gas* 80,000 Input Model High Altitude Multiplier Natural Gas* Alternate Input * Based on mid--range of elevation. Main Burner Flame Check Check for the following: (See Figure 7) Stable and blue flames. Dust may cause orange tips or wisps of yellow, but flames MUST NOT have solid, yellow tips. Flames extending directly from burner into heat exchanger. Flames do NOT touch sides of heat exchanger If any problems with main burner flames are noted, it may be necessary to adjust gas pressures or check for drafts. High Altitude Derated Unit Label The derated label supplied with the conversion kit must be completed and affixed to the furnace near the rating plate. Fill in the manifold pressure, orifice size and revised input rate. Refer to Table 2 or Table 3 provided to determine the proper orifice part numbers for ordering purposes. Verify System Operation Upon completion of all conversion procedures, perform the following steps to attach appropriate labels and verify the system operation. 1. Locate the Natural Gas Conversion Label next to the furnace rating plate. Replace Propane Gas Conversion Label if there. 2. Fill out and attach the Field Conversion Label to the front exterior of the furnace. Replace any existing Field Conversion Label. 3. Turn the thermostat to its lowest temperature setting or to OFF if equipped with a System Select Switch. Figure 7 Main Burner 4. Turn the gas valve control knob or switch to ON. 5. Reinstall all access panels. Burner Face 6. Turn ON all electrical power to the unit. 7. Set the thermostat to the desired temperature and the System Select Switch to HEAT. 8. Observe unit operation through two (2) complete heating cycles. See Sequence of Operation in furnace installation instructions
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS For Burner Kit replacement of 553010021 Burners in GUI, GDI & GNI Gas Furnaces Using Natural Gas Please read these instructions completely before attempting installation. SAFETY
More informationINSTALLATION INSTRUCTIONS
INSTALLATI INSTRUCTIS For Natural Gas to Propane Conversion Kit Model No: NAHA001LP or Part No. (1172958) CVERT Series BTUH N8MPN/L B 50, 75, 100, 125 *8MPN/L B 50, 75, 100, 125 *8MPN B 150 *8DNL B 50,
More informationInstallation Instructions
48011HW NATURAL GAS TO PROPANE CONVERSION KIT 58HDX, 359AAV, PG9YAB, PG9YAA Installation Instructions SAFETY REQUIREMENTS Installing and servicing heating equipment can be hazardous due to gas and electrical
More informationInstallation Instructions
KGAPN40012HW Gas Conversion Kit Propane to Natural for 58HDV, 359BAV and PG9MTAV Furnaces Installation Instructions NOTE: Read the entire instruction manual before starting the installation. AFETY CONIDERATION
More informationInstallation Instructions For Propane Gas Conversion (Kit Part No ) This kit is designed for conversion to Propane Gas
Installation Instructions For Propane Gas Conversion (Kit Part No. 1173859) This kit is designed for conversion to Propane Gas Table 1 LP Gas Orifice Kits and Sizes Elevation Above Sea Level 0 to 2000
More informationInstallation Instructions For Natural Gas Conversion
Installation Instructions For Natural Gas Conversion (Kit Part No. 1175405) This kit is designed to convert PGX4 and PX4 Two -Stage Gas units for use with Natural Gas. Table 1 Heating Value at Altitude
More informationInstallation Instructions
Installation Instructions Gas Conversion Kit Natural-to- Propane for Standing Pilot and HSI Fixed-Speed Non-Condensing Furnaces KGANP2801F80 CERTIFIED NOTE: Read the entire instruction manual before starting
More informationInstallation Instructions
CRNGELEV001A00 CRNGELEV002A00 CRLPELEV005A00 CRLPELEV006A00 CRLPKIT9001A00 LARGE ROOFTOP UNITS with R---410A ACCESSORY PROPANE and HIGH ALTITUDE GAS CONVERSION KIT GAS HEATING/ELECTRIC COOLING 15 to 25
More informationParts List. Qty. Qty.
Installation Instructions SAFETY REQUIREMENTS Parts List Installing and servicing heating equipment can be hazardous due to gas and electrical components. Only trained and qualified personnel should install,
More informationACCESSORY KIT INSTALLATION INSTRUCTIONS
ACCESSORY KIT INSTALLATION INSTRUCTIONS 1NP0680 - PROPANE CONVERSION FOR USE WITH MODELS: PM8, PC8, PM9, PC9, FL9M, FL9C, FC9M, FC9C This conversion kit is to be installed by a qualified service agency
More informationNatural Gas to L.P. Gas Conversion Kit
Natural Gas to L.P. Gas Conversion Kit For Bosch 80% AFUE Gas Furnace, BGS80 Model Installation Instructions 3124627 2 Natural Gas to L.P. Gas Conversion Kit Installation Instructions Data subject to change
More informationACCESSORY KIT INSTALLATION MANUAL
ACCESSORY KIT INSTALLATION MANUAL LP (PROPANE) CONVERSION KIT 1NP0366 FOR USE WITH MODELS: G8C & GF8 This conversion kit shall be installed by a qualified service agency in accordance with these instructions
More informationInstallation Instructions
CRNGELEV001A00 CRNGELEV002A00 CRLPELEV005A00 CRLPELEV006A00 CRLPKIT9001A00 PACKAGED ROOFTOP UNITS with R---410A ACCESSORY PROPANE and HIGH ALTITUDE GAS CONVERSION KIT GAS HEATING/ELECTRIC COOLING 176,000---400,000
More informationNatural Gas to L.P. Gas Conversion Kit
Natural Gas to L.P. Gas Conversion Kit For Bosch 96% AFUE Gas Furnace, BGH96 Model Installation Instructions 3124627 2 Natural Gas to L.P. Gas Conversion Kit Installation Instructions Data subject to change
More informationinstallation instructions
installation instructions GAS CONVERSION KIT PROPANE-TO-NATURAL P/N 315572-71201 4GAD 6GAD Cancels: IIK 4G-50-4 IIK 4G-50-5 7/15/91 NOTE: Read the entire instructions before starting the installation.
More informationInstallation Instructions WARNING: WARNING: WARNING: LP AND HIGH ALTITUDE LP GAS CONVERSION KIT FOR UNITED STATES INSTALLATIONS
LP AND HIGH ALTITUDE LP GAS CONVERSION KIT FOR UNITED STATES INSTALLATIONS Installation Instructions For Model Series *G7/*GC2 Furnaces and Appliances Using Honeywell Gas Valves. BEFORE THE CONVERSION
More informationInstallation Instructions
LP and High Altitude LP Gas Conversion Kit For United States Installations Installation Instructions For Model Series *G6/PGF1 Furnaces, *L1/PGC1 Furnaces, and *R4/PPG1 Gas/Electric Appliances using Honeywell
More informationInstallation Instructions
Installation Instructions Low Pressure Switch Kit for All Multipoise Condensing Furnaces KGALP0101KIT CERTIFIED NOTE: Read the entire instruction manual before starting the installation. SAFETY CONSIDERATIONS
More informationInstallation Instructions
Gas Conversion Kit Natural---to---Propane for 90% Step Modulating Variable Speed, Condensing Gas Furnace Installation Instructions D E S I G N! WARNING C E R T I F I E D CERTIFIED NOTE: Read the entire
More informationNatural Gas High-Altitude Conversion Kit For Installations in the United States (2,001 10,000 Feet)
Natural Gas High-Altitude Conversion Kit For Installations in the United States (2,001 10,000 Feet) INSTALLATION INSTRUCTIONS For R7 Series Light Commercial Packaged Gas Electric Units IIMPORTANT: Please
More informationWARNING: Installation Instructions. Natural Gas High Altitude Conversion Kit United States Installations Only
Natural Gas High Altitude Conversion Kit United States Installations Only Installation Instructions Light Commercial Packaged Gas Electric Units R7TQ Series 6, - 7 1/2, & 10 Ton (2,001 FT - 10,000 FT)
More informationACCESSORY KIT INSTALLATION INSTRUCTIONS
ACCESSORY KIT INSTALLATION INSTRUCTIONS PROPANE CONVERSION - INDUCED COMBUSTION FURNACES 1NP0501 FOR USE WITH 95% MODELS: TG9S, GG9S (130,000 BTU ONLY) FOR USE WITH 80% MODELS: TG(8,L)S, GG(8,L)S (130,000
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Propane Gas Conversion Kit WGCK-1 Instructions for 0-6,000 Feet Elevation Installations This propane gas conversion kit is to be used only when converting the following furnace
More informationWARNING: AVERTISSEMENT. LP & HIGH ALTITUDE LP CONVERSION KIT FOR INSTALLATIONS IN the United STATES (0-10,000 Ft)
LP & HIGH ALTITUDE LP CONVERSION KIT FOR INSTALLATIONS IN the United STATES (0-10,000 Ft) INSTALLATION Instructions For R6GP Light Commercial Package Gas / Electric Units IMPORTANT: Please read all instructions
More informationINSTRUCTIONS FOR CONVERTING CONDENSING GAS MOBILE HOME FURNACES MODEL SERIES: CMA3*, CMC1*, VMA3*, VMC1*
INSTRUCTIONS FOR CONVERTING CONDENSING GAS MOBILE HOME FURNACES MODEL SERIES: CMA3*, CMC1*, VMA3*, VMC1* THIS KIT CONTAINS: AOPS7741 (NATURAL TO PROPANE CONVERSION PARTS FOR MODEL SIZE, 50) AOPS7742(NATURAL
More informationThe conversion of new certified central heating gas appliances must conform to directions outlined in this instruction.
ACCESSORY KIT INSTALLATION INSTRUCTIONS HIGH ALTITUDE APPLICATION CONVERSION MID-EFFICIENCY SINGLE-STAGE INDUCED COMBUSTION FURNACES MODELS: P*HU/G8T-UH/L8T-UH/FL8 UPFLOW / HORIZONTAL P*DN/G8T-DN/L8T-DN
More informationYour safety and the safety of others are very important.
NATURAL GAS TO PROPANE CONVERSION KIT ALPKT57- INSTALLATION INSTRUCTIONS PROPANE CONVERSION KIT SAFETY... INSTALLATION REQUIREMENTS... Tools and Parts... LP Gas Requirements... Table of Contents INSTALLATION
More informationACCESSORY KIT INSTALLATION INSTRUCTIONS
ACCESSORY KIT INSTALLATION INSTRUCTIONS HIGH ALTITUDE APPLICATION CONVERSION INSTRUCTION HIGH EFFICIENCY GAS FURNACES 1PS0306 / 1PS0307 / 1PS0308 / 1PS0309 / 1PS0901 / 1PS0902 / 1PS0903 FOR USE WITH MODELS:
More informationInstallation Instructions
KGAPN4701AAA Gas Conversion Kit Propane --- to --- Natural ECM X 2 --- Stage and Single --- Stage 90% Condensing Gas Furnaces Installation Instructions CERTIFIED C E D E S R T I G N TABLE OF CONTENTS PAGE
More informationInstallation Instructions
Installation Instructions Gas Conversion Kit Natural-to-Propane for Standing Pilot and HSI Fixed-Speed Furnaces KGANP2001ALL CANADIAN GAS ASSOCIATION APPROVED R NOTE: Read the entire instruction manual
More informationINSTALLATION INSTRUCTIONS FOR HIGH ALTITUDE KITS: RXGY-F13, RXGY-F27 AND RXGY-F28
INSTALLATION INSTRUCTIONS FOR HIGH ALTITUDE KITS: RXGY-F13, RXGY-F27 AND RXGY-F28 FOR TWO-STAGE (GPL/GPR/GPE/GLL/GLR/GLE) MODELS Recognize this symbol as an indication of Important Safety Information THESE
More information/2004 US/CA
630 9765 0/004 US/CA For the contractor Propane Conversion Kit Instructions Sealed Combustion Gas Boiler Logano GA44 This kit and instructions are for converting the GA44 model boilers from Natural Gas
More informationGAS KITS & ACCESSORIES 504,986M 11/2004 HIGH ALTITUDE KIT
LENND 2004 Lennox Industries Inc. DaItas, Texas, USA GAS KITS & ACCESSORIES Litho U.S.A. 504,986M 11/2004 HIGH ALTITUDE KIT INSTALLATION INSTRUCTIONS FOR HIGH ALTITUDE KIT (83M75) USED WITH G43UF & G51MP
More informationINSTALLATION INSTRUCTIONS FOR HIGH ALTITUDE KITS: RXGY-F29, F30, F31, F32 & F33
INSTALLATION INSTRUCTIONS FOR HIGH ALTITUDE KITS: RXGY-F29, F30, F31, F32 & F33 FOR TWO-STAGE 90 PLUS DOWNFLOW/HORIZONTAL (-GTK) MODELS Recognize this symbol as an indication of Important Safety Information
More informationInstallation Instructions
Installation Instructions Gas Conversion Kit Propane-to-Natural for Standing Pilot, HSI Fixed-Speed, HSI Two-Speed, and Variable Speed Furnaces KGAPN2301ALL NOTE: Read the entire instruction manual before
More informationInstallation Instructions
KGBPN42011SP Gas Conversion Kit Propane --- to --- Natural for 1 Stage Condensing (90%+) and Non---Condensing Gas Furnaces NOTE: Installation Instructions CERTIFIED Read the entire instruction manual before
More informationACCESSORY KIT INSTALLATION INSTRUCTIONS
ACCESSORY KIT INSTALLATION INSTRUCTIONS PROPANE CONVERSION - INDUCED COMBUSTION FURNACES 1NP0347 FOR USE WITH 90% MODELS: GF9S, GY9S, GM9S, PS9, FL9S, FC9S, PT9, FL9T, FC9T, GM9T, PV9, FL9V, FC9V, GM9V,
More informationInstallation Instructions
KGCPN4401VSP Gas Conversion Kit Propane --- --- Natural for Variable Speed, Condensing and Non---Condensing Gas Furnaces NOTE: Installation Instructions CERTIFIED Read the entire instruction manual before
More informationWARNING: Gas Conversion Kit Instructions Applies to: Model UDAP, UDAS, UDBP, and UDBS Unit Heaters. General and Warnings FOR YOUR SAFETY
Form CP-UD-GC Obsoletes I-UD-GC (Version E) Gas Conversion Kit Instructions Applies to: Model UDAP, UDAS, UDBP, and UDBS Unit Heaters General and Warnings All gas conversion must be done by a qualified
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS PROPANE GAS to NATURAL GAS CONVERSION KIT Condensing and Non Condensing Gas Furnaces (F/G)9MXE, F9MES, N9MXB, N9MSB, N9MSE, WFAR, WFSR, R9MSB (F/G)8MXN, (F/G)8MXL, N8MSN, N8MSL,
More informationINSTALLATION INSTRUCTIONS FOR HIGH ALTITUDE KITS: RXGY-F23, F24, F25, F26, F38, F39, F40 & F41
INSTALLATION INSTRUCTIONS FOR HIGH ALTITUDE KITS: RXGY-F23, F24, F25, F26, F38, F39, F40 & F41 FOR MODULATING DOWNFLOW/HORIZONTAL AND DEDICATED HORIZONTAL MODELS (-GGD, -GGE, -GGF)! Recognize this symbol
More informationGAS VALVE RETROFIT KIT Pull Through Tube Heater Models
GAS VALVE RETROFIT KIT Pull Through Tube Heater Models DESCRIPTION: This kit is designed to replace existing Honeywell gas valves #VR8205P and #VR8205Q with White-Rodgers gas valves #36J23 and #36J58 respectively
More informationInstallation Instructions For Propane Gas Conversion
Installation Instructions For Propane Gas Conversion Kit Part No. NPLPCONV04A00, High Altitude Only 200-6,000 ft. Model WPG**4, PGD, PGS, PDD, PDS, PGD4, PGS4, PGN4, PGD5, PGS5, PGN5 2 to 5 Ton Units 40,000
More informationFor *G7 / *GC2 & GUH* / GDD* Series Furnaces & Appliances Using Honeywell Gas Valves
LP & HIGH ALTITUDE LP GAS CONVERSION KIT FOR INSTALLATIONS IN CANADA INSTALLATION INSTRUCTIONS For *G7 / *GC2 & GUH* / GDD* Series Furnaces & Appliances Using Honeywell Gas Valves BEFORE THE CONVERSION
More informationPropane Conversion Kit Instructions
604 8 0/ US/CA For heating engineers Propane Conversion Kit Instructions Logano G4 X gas-fired boiler This conversion kit and the accompanying instructions are for conversion of G4 X gas-fired boilers
More informationGas Conversion Kits CERAMIC HEATER SERIES (1, 2, 3, 4 Burner Units)
DESCRIPTION These kits are designed to convert from one gas type to another (eg. from NATURAL to PROPANE or from PROPANE to NATURAL) only for new heaters (5 years or newer) by replacing the gas valve spring
More informationACCESSORY KIT INSTALLATION INSTRUCTIONS PROPANE CONVERSION - INDUCED COMBUSTION FURNACES 1NP0347
ACCESSORY KIT INSTALLATION INSTRUCTIONS PROPANE CONVERSION - INDUCED COMBUSTION FURNACES 1NP0347 FOR USE WITH 90% MODELS: GF9S, GY9S, GM9S, PS9, FL9S, FC9S, PT9, FL9T, FC9T, GM9T, PV9, FL9V, FC9V, GM9V,
More information36E DSI, HSI & Proven Pilot Two-Stage Combination Gas Valve INSTALLATION INSTRUCTIONS
INLET PRESS TAP WTE-RODGERS 36E96-314 DSI, HSI & Proven Pilot Two-Stage Combination Gas Valve INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL
More informationACCESSORY KIT INSTALLATION INSTRUCTIONS PROPANE CONVERSION - INDUCED COMBUSTION FURNACES 1NP0347
ACCESSORY KIT INSTALLATION INSTRUCTIONS PROPANE CONVERSION - INDUCED COMBUSTION FURNACES 1NP0347 FOR USE WITH 90% + MODELS: GF9S, GY9S, GM9S, PS9, FL9S, FC9S, PT9, FL9T, FC9T, GM9T, PV9, FL9V, FC9V, GM9V,
More informationInstallation Instructions
KGAMH0601KIT MANUFACTURED (MOBILE) HOME 35---IN. (889 MM) HIGH EFFICIENCY CONDENSING GAS FURNACE CONVERSION KIT Installation Instructions CERTIFIED NOTE: Read the entire instruction manual before starting
More informationOperator: Save these instructions for future use!
INLET PRESS TAP WHITE-RODGERS 36E93-304 Delay-Opening Combination Gas Valve INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS PROPANE TO NATURAL GAS CONVERSION KIT NAHA00801NG or PART NO. 1183389 TABLE OF CONTENTS Safety Considerations... 1 Introduction... 1 Description and Usage... 2 Induced Combustion,
More informationInstallation Instructions
001A00-004A00, 007A00-009A00 SMALL ROOFTOP UNITS ACCESSORY LP (LIQUID PROPANE) HIGH ALTITUDE GAS CONVERSION KIT GAS HEATING/ELECTRIC COOLING 3to15TON s 04 to 16 and 036 to 180 60,000--350,000 Btu/hr TABLE
More informationInstallation Instructions
001A00-004A00, 007A00-009A00 SMALL ROOFTOP UNITS ACCESSORY LP (LIQUID PROPANE) HIGH ALTITUDE GAS CONVERSION KIT GAS HEATING/ELECTRIC COOLING 3to15TON s 04 to 16 and 036 to 180 60,000--350,000 Btu/hr TABLE
More information36E DSI and HSI Two-Stage Combination Gas Valve INSTALLATION INSTRUCTIONS
INLET PRESS TAP WTE-RODGERS 36E54-214 DSI and HSI Two-Stage Combination Gas Valve INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS
More informationConversion instructions from natural gas to propane
6 720 804 895 202/0 EN-US For heating engineers Conversion instructions from natural gas to propane Room air-independent special gas-fired boiler Logano GA24 This conversion kit and the instructions are
More informationSL G3. Warning
Important: If converting from Propane to Natural Gas - order the Natural Gas Conversion Parts Kit (IBC Part # P-307) from your authorized IBC Distributor. Use the Propane Gas conversion parts kit if the
More informationSL G3 - Fuel Conversion to Propane (NG to LP) P-Kit 302
SL 40-399 G3 - Fuel Conversion to Propane (NG to LP) P-Kit 302 If converting from Propane to Natural Gas, order the Natural Gas Conversion Parts Kit (IBC Part # P-303) from your authorized IBC Distributor.
More informationInstructions for High Altitude Conversion
6304 38 0/ US/CA For heating engineers Instructions for High Altitude Conversion Logano G334 X gas-fired boiler This conversion kit and the accompanying instructions are for conversion of G334 X gas-fired
More informationGas Conversion Kits Push Through (Positive Pressure) Tube Heater Models
DESCRIPTION These kits are designed to convert from one gas type to another (eg. from NATURAL to PROPANE or from PROPANE to NATURAL) when equipped with White-Rodgers DSI gas valves number 36J23 or 36J58.
More informationInstallation Instructions
Installation Instructions Gas Conversion Kit Natural-to-Propane For All Condensing Furnaces and Variable and 2-Speed Non-Condensing Furnaces KGANP2701LPS CERTIFIED NOTE: Read the entire instruction manual
More informationPropane Conversion Kit Instruction
Propane Conversion Kit Instruction Condensing gas boiler Required Input Rates Logamax plus GB62-80 kw 270,000 btu/hr Logamax plus GB62-00 kw 35,000 btu/hr This kit and instructions are for converting the
More information36E03 and 36E38 DSI and HSI Step Opening Combination Gas Valve INSTALLATION INSTRUCTIONS
INLET PRESS TAP WHITE-RODGERS 36E03 and 36E38 DSI and HSI Step Opening Combination Gas Valve INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS
More informationSL G3 - Fuel Conversion to Natural Gas (LP to NG) P-Kit 301
SL 26-260 G3 - Fuel Conversion to Natural Gas (LP to NG) P-Kit 301 Note If converting from Natural Gas to Propane, order the Natural Gas Conversion Parts Kit (IBC Part # P-300) from your authorized IBC
More informationDANGER WARNING IMPORTANT
BWC Series Instructions for Field Conversion From: Natural Gas to LP LP to Natural Gas D E S I G N E D T O L E A D DANGER These instructions include a procedure for adjusting the air-fuel mixture on this
More informationPropane Conversion Kit Instruction
Propane Conversion Kit Instruction Condensing gas boiler Required Input Rates GB142-24 84,800 btu/hr GB142-30 106,000 btu/hr GB142-45 160,900 btu/hr GB142-60 214,800 btu/hr This kit and instructions are
More informationVR8205S,T Direct Ignition Combination Gas Controls
VR805S,T Direct Ignition Combination Gas Controls INSTALLATION INSTRUCTIONS APPLICATION TheVR805S,T Direct Ignition Combination Gas Controls are used in gas-fired appliances with up to 70 ft 3 /hr capacity
More informationG196 Series BASOTROL Redundant Combination Gas Valve with Manual Shutoff Valve
Installation Instructions Issue Date March 13, 2013 G196 Series BASOTROL Redundant Combination Gas Valve with Manual Shutoff Valve Application The G196 valves are suitable for use with natural gas, Liquefied
More information36G22, 36G23, 36G24 & 36G52 36J22, 36J23, 36J24 & 36J52 DSI and HSI Single Stage Combination Gas Valve
Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE. DESCRIPTION
More informationNatural Gas Conversion Kit
PART # 781 NGCK-M (Manual Ignition) Natural Gas Conversion Kit WARNING: This conversion kit shall be installed by a qualified service agency in accordance with the manufacturer s Instructions and all applicable
More informationVR8305 Direct Ignition Combination Gas Control
Honeywell VR8305 Direct Ignition Combination Gas Control Application These direct ignition combination gas controls are used in gas-fired appliances with capacities up to 300 feet 3 /hour at inch wc pressure
More informationPropane Conversion Kit Instruction
Propane Conversion Kit Instruction Condensing gas boiler Required Input Rates GB42-24 84,800 btu/hr Tab. GB42-30 06,000 btu/hr GB42-45 49,000 btu/hr GB42-60 24,800 btu/hr This kit and instructions are
More informationG196 Series BASOTROL Redundant Combination Gas Valve with Manual Shutoff Valve
Installation Instructions Issue Date August 19, 2008 G196 Series BASOTROL Redundant Combination Gas Valve with Manual Shutoff Valve Application The G196 valves are suitable for use with natural gas, Liquefied
More informationG96 Series BASOTROL Dual Operator Valve
Installation Instructions 9. Issue Date February 22, 2013 G96 Series BASOTROL Dual Operator Valve Applications The G96 valves are combination, dual operator, automatic valves available with or without
More information36H SERIES Combination Gas Valve
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE. DESCRIPTION The 36H series combination gas valve is
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS PROPANE GAS to NATURAL GAS CONVERSION KIT Condensing Gas Furnaces F9MES 220 V 50Hz NAHA01101NG CERTIFIED NOTE: Read the entire instruction manual before starting the installation.
More informationWARNING IMPORTANT H Identifying the Model, Control Code and Date of Manufacture
5H0722980000 December, 2016 SELECTION AND INSTALLATION INSTRUCTIONS conversion from natural gas to propane gas for models PD/BD, PDP/BDP, PV/BV, DJE/DHE, IJE/IHE with control codes 11-14 or 30-33 and built
More information36C/36D HSI, DSI Proven Pilot Gas Valves INSTALLATION INSTRUCTIONS
36C/36D HSI, DSI Proven Pilot Gas Valves INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING
More informationNatural Gas Conversion Kit
SERIAL #: Attention: Centro recommends that a qualified gas technician perform the gas supply conversion and orifice replacement for this BBQ model. Natural Gas Conversion Kit F O R U S E W I T H M O D
More informationV8200A,C,H,M and VR8200A,C,H,M Continuous Pilot Combination Gas Controls
V800A,C,H,M and VR800A,C,H,M Continuous Pilot Combination Gas Controls APPLICATION These continuous pilot combination gas controls are used in gas-fired appliances up to 00 cfh capacity of natural gas.
More informationWARNING: FOR OUTDOOR USE ONLY
Certified to CSA International 4.96 US For Outdoor Gas Fireplaces A HIGHER STANDARD IN QUALITY AND APPEARANCE SAFE AND BEAUTIFUL OUTDOOR LARGO FIRE PIT FOR PROPANE AND *NATURAL GAS OWNER S MANUAL WARNING:
More informationOperator: Save these instructions for future use!
WHITE-RODGERS 6C8-5 Combination Gas Control INSTALLATI INSTRUCTIS Operator: Save these instructions for future use FAILURE TO READ AND FOLLOW ALL INSTRUCTIS CAREFULLY BEFORE INSTALLING OR OPERATING THIS
More informationGAS CONVERSION KIT Installation Instructions Range/Rangetop
GAS CONVERSION KIT Installation Instructions Range/Rangetop FOR SERVICE PERSONNEL ONLY IMPORTANT - READ ALL INSTRUCTIONS BEFORE YOU BEGIN THE INSTRUCTIONS HEREIN MUST ONLY BE PERFORMED BY A QUALIFIED SERVICE
More informationINSTALLATION INSTRUCTIONS MANUAL ON/OFF SAFETY VALVE/PILOT KIT MODEL GA9050A-1 (F0235)
P/N 126905-01 Rev. B 11/2016 INSTALLATION INSTRUCTIONS MANUAL ON/OFF SAFETY VALVE/PILOT KIT MODEL GA9050A-1 (F0235) For All Single, Dual and Triple Burner Natural and Propane/LP Gas Logs P126905-01 For
More informationVR8105, VR8205, and VR8305 Direct Ignition Combination Gas Controls
VR805, VR805, and VR8305 Direct Ignition Combination Gas Controls APPLICATION These direct ignition gas controls are used in gas-fired appliances with up to 45 ft 3 /hr capacity at in. wc pressure drop
More informationINSTALLATION GUIDE Gas Rangetops
INSTALLATION GUIDE Gas Rangetops Contents Wolf Gas Rangetops........................... 3 Safety Instructions............................ 4 Gas Rangetop Specifications.................... 5 Gas Rangetop
More informationUSER S INFORMATION MANUAL
USER S INFORMATION MANUAL UPFLOW, DOWNFLOW, UPFLOW/HORIZONTAL & HORIZONTAL ONLY INDUCED DRAFT GAS FURNACES Recognize this symbol as an indication of Important Safety Information If the information in this
More informationVR8200A Continuous Pilot Combination Gas Controls
SUPER TRADELINE VR800A Continuous Pilot Combination Gas Controls Application These continuous pilot combination gas controls are used in gas-fired appliances that have up to 00 cfh capacity of natural
More informationOperator: Save these instructions for future use!
WHITE-RODGERS Type 36C04, 36C14 Step-Opening Combination Gas Control (24 Volt, 120 Volt & 750 mv Models) INSTALLATI INSTRUCTIS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW
More informationGas Valve Replacement Kit
Kit Part Number:PGRKIT01 Parts List 1. Honeywell VK8115V 2. /Orifice Gasket. Torx Screws ( pcs) 4. Venturi/Blower Housing Gasket 5. # 25 Torx Wrench. 1 2 4 Recommended tools: A. Pipe Wrench. B. Phillips
More informationOperator: Save these instructions for future use!
WHITE-RODGERS 36C53 Combination Gas Valves (24 Volt Model) INSTALLATI INSTRUCTIS Electrical Rating: Voltage: 24 Volts, (30 Volts Max.), 60 Hz. Current Rating: 0.23 Amps Type of Gas Natural Gas Pressure
More informationVS8420 Millivolt Gas Valve
VS8420 Millivolt Gas Valve INSTALLATION INSTRUCTIONS APPLICATION The VS8420 Millivolt Gas Valve is compact and has a 60,000 Btuh capacity (1 in. pressure drop for straightthrough configuration). The design
More informationBGA158 Series CE Approved Class A Shutoff Gas Valve
Installation Instructions BGA158 Issue Date August 24, 2011 BGA158 Series CE Approved Class A Shutoff Gas Valve Applications The BGA158 Series shutoff gas valve is an electrically operated gas valve that
More informationOperator: Save these instructions for future use!
Pilot Gas Outlet: Located at outlet end of the valve Type of Gas Suitable for all domestic heating gases Pressure Rating: 1/2 lb. per sq. in. Pressure Regulator Adjust Range (Typical, See Control Label):
More informationGas Conversion Kit Pilot Ignition Heaters
INSTALLATION INSTRUCTIONS Gas Conversion Kit Pilot Ignition Heaters View these instructions online at www.lbwhite.com Kit Contents: DESCRIPTION QTY. Instructions 1 Burner Orifi ce 1 Pilot Orifi ce 1 Variable
More informationBGA158 Series CE Approved Class B Shutoff Gas Valve
Installation Instructions BGA158 Issue Date March 22, 2016 BGA158 Series CE Approved Class B Shutoff Gas Valve Applications The BGA158 Series shutoff gas valve is an electrically operated shutoff valve
More informationINSTALLATION AND OPERATING INSTRUCTIONS BIG TEX VENTED GAS LOGS
INSTALLER! PLEASE LEAVE WITH HOMEOWNER INSTALLATION AND OPERATING INSTRUCTIONS BIG TEX VENTED GAS LOGS by Please Note: It is important that you read instructions before installing or operating gas logs
More informationMEGR-1912 Instruction Manual
MEGR-1912 PRESSURE REGULATOR Instruction Manual- Look Inside For: Description Installation Start-Up Maintenance Parts Ordering Parts List Marshall Excelsior Company Marshall, MI 49068 269-789-6700 FAX
More informationOperator: Save these instructions for future use!
WHITE-RODGERS Type 36C67 Combination (24 Volt Models) INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING
More informationGM-7000 Series CE Approved Gas Control Valve
Installation Instructions GM-7000 Issue Date November 9, 2012 GM-7000 Series CE Approved Gas Control Valve Installation IMPORTANT: These instructions are intended as a guide for qualified personnel installing
More information