Corporate Standard Manual Handling HB#

Size: px
Start display at page:

Download "Corporate Standard Manual Handling HB#"

Transcription

1 Contents Contents... 1 Functional Flowchart... 1 Objective... 1 Scope... 1 Definitions... 1 Responsibilities... 2 OH&S Systems Manager... 2 Station / Site Manager... 2 Workers... 2 Hazards... 2 Inspections and Risk Assessments... 2 Controls... 3 Training and Competency... 3 Review... 3 Links and References... 4 Attachments... 4 Attachment 1: Guide... 5 Attachment 2: Audit Checklist... 8 Functional Flowchart Not Applicable Objective To provide a corporate standard that outlines SCL s procedure for managing manual handling hazards. Scope This corporate standard applies to any location or situation in which a worker is required to undertake specific manual handling activities. Definitions Competent Person: a person who has through a combination of training, education and experience, acquired knowledge and skills enabling that person to perform correctly the specified task. Ergonomics: the science which deals with the interaction between people, their work place and environment. It also considers the physiology of workers in the design of tools, equipment, and the work methods needed. HBIRDPRO_ DOC Page: 1 of 9

2 Ergonomist: a person trained / qualified in ergonomics. : the use of force by a person to lift, push, pull, carry or otherwise move, manipulate, hold or restrain any animate or inanimate object. Worker: SCL employee or controlled contractor. Responsibilities OH&S Systems Manager To maintain the currency and accuracy of the reflective of legislative and corporate change. Station / Site Manager To monitor the implementation of the and allocate responsibilities and resources to ensure site-specific practices/procedures are developed to satisfy the. Workers To comply at all times with the requirements specified within this and any site-specific procedures. Hazards Manual handling hazards that have been identified and are controlled under this safe system, include but are not limited to: Repeating an action frequently; Bending and twisting; Uncomfortable working condition; Exerting high force; Working long periods without opportunity for rest and recovery; Repetitive and heavy lifting; Exerting a force in a static position for an extended amount of time; Adverse working condition (e.g. hot, cold or involving vibration); High job demands and time pressures; and Tasks involving the handling of unstable or unbalanced loads or loads which are difficult to grasp or hold. Inspections and Risk Assessments 1. A competent person is to undertake an inspection / risk assessment, as deemed necessary, in situations including but not limited to: prior to work area / plant re-design or work environment modifications; prior to purchase of new plant and equipment; following a manual handling related injury; and following a worker complaint relating to manual handling / ergonomic issues. For further guidance regarding undertaking a manual handling risk assessment refer National Code of Practice Risk Assessment and Risk Control form. Note: Where a particular job / task is complex and/or controls have been ineffective, an Ergonomist or other qualified practitioner (Occupational Therapist/Physiotherapist) may need to be consulted. Note: The SCL Form - Workstation Ergonomics Assessment Tool, has been developed to assist with undertaking ergonomic inspections of workstations. HBIRDPRO_ DOC Page: 2 of 9

3 Controls Consideration needs to be given to controlling manual handling related hazards in the following scenarios: 1. When purchasing new plant and equipment (where relevant): provide design specifications that have considered the potential impact(s) on a worker during all stages of its use and storage; and select products that have considered manual handling / ergonomic factors in the design. 2. Where relevant, specifications are to be given to suppliers regarding how equipment and products are to be packaged, and the way they are to be delivered to reduce the risk of manual handling hazards. Examples of factors to be considered include: the size of containers and other packaging, which may be affected by how they are to be handled (e.g. by forklift or manually by workers); packaging type and whether handles should be provided; and how and where products are delivered. 3. Designers, engineers and / or other relevant competent persons, who are required to design or modify tasks, work processes or equipment involved in manual handling, are to ensure that manual handling risk is eliminated or reduced / minimised at design stage. 4. Appropriate mechanical lifting equipment (e.g. trolleys, hoists, cranes etc) and personal protective equipment (e.g. gloves, support belts etc.) are to be made available to workers required to undertake specific manual handling activities on site. Note: Specific procedures for safe lifting and other relevant manual handling activities are detailed in Attachment 1 Guide. 5. Lifting equipment identified as being damaged or unsafe for use is to be tagged with an information tag and taken out of service until it is replaced or repaired and / or deemed safe to use by a competent person. Training and Competency Training is to be provided as per HBIRDPRO-# Training Rationale. Review This is reviewed every 3 years and on an as needs basis (e.g. following legislative change, new information, relevant incident, etc.). HBIRDPRO_ DOC Page: 3 of 9

4 Links and References SCL Form - Workstation Ergonomics Assessment Tool SCL Form - Reference Sheet HBIRDPRO-# Training Rationale QLD Manual Tasks Code of Practice 2010 NOHSC National Code of Practice for the Prevention of Musculoskeletal Disorders from Performing Manual Tasks at Work 2007 NOHSC National Standard for Manual Tasks NOHSC National Code of Practice Risk Assessment and Risk Control. Attachments Attachment 1: Guide Attachment 2: Audit Checklist Return To Top HBIRDPRO_ DOC Page: 4 of 9

5 Page 1 of 3 Attachment 1: Guide Note: This guide has been designed to provide general advice regarding control options for minimising the risk associated with lifting and poor work postures and therefore does not contain information relating to all manual handling related hazards. For further information refer to the National Code of Practice for. 1. CORRECT LIFTING PROCEDURES FOR INDIVIDUALS STEP 1. Assess the Situation Before lifting and carrying a heavy object, take a few moments to assess the situation. How far will you have to carry the load? Is the way clear of clutter, cords, slippery areas, overhangs, stairs, curbs, or uneven surfaces? Will there be doors that are closed? Ask someone to hold a door open or place a wedge under the door to hold it open. Once you get the load up, will you be able to see over the load, or will the load block your view? Can the load be disassembled, carried in pieces, then reassembled? STEP 2. Assess the Load Take a few moments to "size up the load." Test the weight by lifting a corner of the object. If it is too heavy or if the object is an odd shape, STOP! Ask for help. Two or three people lifting a heavy object is much safer than trying to do it yourself. Use a hand truck, pushcart, or a mechanical lifting device. Consider using gloves that will improve your grip and protect your hands. Never lift anything unless you are sure you can do so safely. STEP 3. Lifting the Load The KEY to lifting safely is keeping your back straight or slightly arched. NEVER USE YOUR BACK TO LIFT! Start the lift by putting your feet close to the object. Get a firm footing. Centre your body over your feet. Squat down like a professional weightlifter, bending your knees. Keep your back straight or slightly arched. You want your legs to do the lifting, not your back. Grasp the load securely with your hands, and pull the load close to you. Smoothly lift straight up. NEVER TWIST YOUR BODY WHILE LIFTING, KEEP YOUR HEAD UP, AS IF LOOKING STRAIGHT AHEAD, NOT DOWN. STEP 4. Carrying the Load As you carry the load: Keep your back straight or slightly arched. Walk slowly and surely. Use your feet to change directions. Never twist your back. Avoid leaning over. Avoid lifting a load over your head. If you become tired, set the load down, and rest for a few moments. STEP 5. Setting the Load Down Setting the load down is the reverse of lifting. Position yourself where you want to set the load. Squat down. Let your legs do the work, not your back. REMEMBER NOT TO TWIST YOUR BODY WHILE SETTING DOWN A LOAD, AND KEEP YOUR HEAD UP. Once the load is where you want it, release your grip. Never release your grip on a load until it is secure. You don't want to drop a load on your foot. Or, if someone is helping you, dropping a load unexpectedly can injure the other person. HBIRDPRO_ DOC Page: 5 of 9

6 TROLLEYS & CARTS Page 2 of 3 When using trolleys or carts, remember: It is easier and safer to push than to pull. Stay close to the load, try not to lean over, and keep your back straight or slightly arched. Use both hands to control the trolley or cart. Use tie-down straps, if necessary, to secure the load. Avoid stairs and inclines. If you must take a load to another floor, use a freight elevator (if available). Never "horse around" with trolleys or carts. TEAM LIFTING Whenever team lifting is used, it is essential to co-ordinate and carefully plan the lift. In organising a lift, make sure: An adequate number of workers are chosen to help in the team. Team members are of similar sizes to each other. One person is appointed to plan and take charge of the operation. There is enough space for the handlers to manoeuvre as a group. Workers know their responsibilities during the lift. Training in team lifting has been provided and the lift rehearsed. Include also what to do in case of emergency. Training in effective team handing should include the following: Assessing the lift and the type of lift. Deciding on the number of people needed and where they should be positioned. Clearing the area of potential hazards. Discussing the lift first with the co-workers and ensuring they are comfortable with their role and the task. Using a countdown to start the lift, and to call all actions. How to use lifting aids. An overview of, and the risks involved with team lifting. 2. WORKING POSTURES Note: Controlling poor working postures should focus on redesign of the contributory risk factors that influence task demands, e.g. the work area, tools or equipment, loads, and load handling activities. BACK Bending Controls for bending movements could include the following: Use of height adjustable work benches / surfaces etc. Position materials between thigh and shoulder height. Ensure workstations have adequate knee and foot clearance so that workers can get close to a work item without bending. Provide / use equipment such as tilted work surfaces (height and angle adjusted), and spring-loaded surfaces. Provide / use gravity-assisted devices or automatic feed devices. Raise the work level using scissor lift tables, work dispensers and similar mechanical aids. Ensure good lighting to: eliminate the need to bend; and have good visibility of the workplace and other materials / items. Controls for bending movements caused by reaching could include the following: Position tools, machine controls and work items in such a way as to eliminate reaches over 30cm from sitting and 50cm from a standing position. HBIRDPRO_ DOC Page: 6 of 9

7 Twisting Page 3 of 3 Controls to minimise twisting could include the following: Place the most used work items on the worker s preferred side and within easy reach to avoid lifting across the body. Instruct workers to move their feet to turn, rather than twist their back in reaching behind. Provide swivel chairs for seated workers. When lifting, the pick-up and set-down positions are often at an angle to one another. Therefore, sufficient work space for the worker to turn the whole body should be provided. HEAD AND NECK Use an inclined work surface to reduce forward bending of the neck for tasks with hand-eye coordination such as precision work with tools. Work with documents and displays in front and at a height to avoid the neck twisting and bending forwards. Improve the visibility of the task by reviewing levels of light. Inadequate lighting levels can contribute to awkward postures. ARMS AND SHOULDERS Keep work below shoulder height by modifying equipment or providing a platform to raise the effective height of the worker. Place computer mouse adjacent to keyboard at same level or lower, to reduce shoulder elevation and static shoulder load. Provide arm supports if manipulative tasks must be performed in a raised position. Arm supports reduce the load on the shoulders and spine. Design workstations so work is performed with the forearm pivoting around the elbow (upper arm close by trunk). Shorten reaches so that workers can get close to objects to be handled. ELBOW AND FOREARM Select tools that do not require the forearm to turn. Design equipment controls to avoid forearm rotation. Avoid rotating the forearms in opposite directions (i.e. clothes wringing action). Fix one section to stabilize so movement is needed from only one hand. WRIST AND HAND Use tools or levers that allow the wrist to remain straight. Follow the principle of bend the tool or tool handle not the wrist. When working with the fingers in a straight position. Keep the effort very low and do not bend the wrist backwards. Avoid working with the wrist bent down when the fingers are moving or an object is being gripped. Grip strength decreases rapidly under these circumstances. When objects have to be moved around the working surface, slide rather than tilt them. HANDS AND FINGERS Avoid using pinch grips unless precision is required. Use a hook grip where possible when handling thin items. Avoid gripping requirements in repetitive work that spread fingers and thumb apart more than 6cm. Vibrating hand tools with a wide grip are of particular concern. LEGS AND FEET Organise work so only necessary stages must be performed at low levels that require squatting or kneeling: - provide a cushioned surface, such as knee pads or padding on the floor - avoid squatting in repetitive work - limit squatting to low-duration tasks Fit suitable steps to heavy vehicles and loading docks to deter jumping. HBIRDPRO_ DOC Page: 7 of 9

8 Attachment 3: Audit Checklist 1. Refer Word SCL Templates / Corporate Management/Audit Report Template for further explanation of Risk Levels / Root Causes. 2. Complete page 1 of the Audit Report Template when the findings are to be entered into the ARD and combine with this table. 3. Save completed document to Hummingbird/Corporate Management / Audit. ARD ID # SHORT TITLE STANDARD / OBLIGATION BEING AUDITED AND FINDING RECOMMENDATION RECOMMEND N CLASSIFICATION TARGET DATE ACTION OFFICER APPROVING OFFICER APPROVING GM RISK LEVEL/ ROOT CAUSE Risk Assessment Risk Assessments as relevant completed prior to: work area / plant re-design / modifications? purchase of new plant / equipment? following manual handling related injuries? following worker complaints regarding manual handling / ergonomic issues? Purchasing Plant and equipment purchased (where relevant): manual handling / ergonomics factors considered in design? design specifications provided to supplier? HBIRDPRO_ DOC Page: 8 of 9

9 ARD ID # SHORT TITLE STANDARD / OBLIGATION BEING AUDITED AND FINDING RECOMMENDATION RECOMMEND N CLASSIFICATION TARGET DATE ACTION OFFICER APPROVING OFFICER APPROVING GM RISK LEVEL/ ROOT CAUSE Equipment Training and Competency Appropriate mechanical lifting equipment made available to workers? Workers (including new workers) have received training / instruction regarding safe manual handling as per Training rational? Entered into ARD: Name: Signature: Date: HBIRDPRO_ DOC Page: 9 of 9

GUIDELINE for MSD Hazard Control Measures

GUIDELINE for MSD Hazard Control Measures APPENDIX C GUIDELINE for MSD Hazard Control Measures This MSD Control Measures guideline document will help you eliminate or reduce musculoskeletal disorder hazards identified by the MSD Hazard ID Form.

More information

Manual Handling Procedure

Manual Handling Procedure Manual Handling Procedure Table of Contents 1 Purpose... 3 2 Scope... 3 3 Definitions... 3 4 Responsibilities... 3 4.1 Managers And Supervisors... 3 4.2 Workers (Employees, Contractors And Visitors)...

More information

ASSESSING AND CONTROLLING MANUAL HANDLING RISK

ASSESSING AND CONTROLLING MANUAL HANDLING RISK ASSESSING AND CONTROLLING MANUAL HANDLING RISK Location of task: Description of manual handling task: Date of assessment: Persons doing assessment: Work area management rep: Work area H&S rep (or deputy):

More information

Injury Prevention and Ergonomics Manual Health & Safety

Injury Prevention and Ergonomics Manual Health & Safety Rev Document Number Author Approver / BFO Approver Signature Issue Date Page 1 OP-MAN-00041 D Christie-Down Manager Regional 28/06/2018 1 of 14 TABLE OF CONTENTS 1 Purpose and Scope...3 2 Manual Handling...

More information

Office Ergonomics Standard

Office Ergonomics Standard This standard outlines general workstation and work practices to be followed in order to reduce the risk factors for developing musculoskeletal injuries (MSIs) and visual strain from working at computer

More information

Z.A.C. Incorporation

Z.A.C. Incorporation Ergonomic Safety Checklist conducted for Z.A.C. Incorporation Date and Time of Inspection 28 May 2018 11:32 AM Inspected by Grace Joan Tan Location 1 Dinso Rd, Khwaeng Wat Bowon Niwet, Khet Phra Nakhon,

More information

2.18 Manual Handling Policy and Procedure Table of Contents

2.18 Manual Handling Policy and Procedure Table of Contents Table of Contents Section 1 - Policy... 3 1.1 Purpose... 3 1.2 Scope... 3 1.3 Requirements... 3 1.4 Responsibilities... 3 Section 2 - Procedure... 4 Section 3 - References... 9 3.1 Statutory Documents...

More information

SAFE MANUAL HANDLING OPERATIONS

SAFE MANUAL HANDLING OPERATIONS SAFE MANUAL HANDLING OPERATIONS STFC Safety Code No 12 Rev. 1.5, Issued August, 2017 Note - This document may have been superseded by a more recent version. Revisions 1 Initial Launch November 2007 1.1

More information

Corporate Standard Hazardous Substance Management HB#625157

Corporate Standard Hazardous Substance Management HB#625157 Contents Contents... 1 Functional Flowchart... 1 Objective... 1 Scope... 1 Definitions... 2 Responsibilities... 3 OH&S Systems Manager... 3 Station / Site Manager... 3 Workers... 3 Hazards... 3 Risk Assessment...

More information

Soteria Strains. Safe Patient Handling and Mobility Program Guide

Soteria Strains. Safe Patient Handling and Mobility Program Guide Soteria Strains Safe Patient Handling and Mobility Program Guide Section 4 Special Considerations Section 4.1 - Emergency Situations V1.0 edited July 20, 2015 A provincial strategy for healthcare workplace

More information

MSD Risk Assessment Checklist

MSD Risk Assessment Checklist MSD Risk Assessment Checklist Purpose This MSD Risk Assessment Checklist is designed to provide you with a relatively quick and easy way to more formally assess the risk associated with exposures to some

More information

Constructive Ideas. Assessing the risk of sprains and strains CI Introduction. Step 1: Identify hazards. What is musculoskeletal injury (MSI)?

Constructive Ideas. Assessing the risk of sprains and strains CI Introduction. Step 1: Identify hazards. What is musculoskeletal injury (MSI)? Constructive Ideas Innovative ideas to reduce soft tissue injuries in the construction in dus try! Assessing the risk of sprains and strains Introduction What is musculoskeletal injury (MSI)? Musculoskeletal

More information

Manual Tasks Minimum Standard. October, 2014

Manual Tasks Minimum Standard. October, 2014 Manual Tasks Minimum Standard Manual Tasks Minimum Standard October, 2014 Contents 1 Executive Summary... 2 2 More Information... 2 3 Using this Standard... 2 4 Managing Risk... 2 4.1 Consultation... 2

More information

Induction SGAC - EVENTS -

Induction SGAC - EVENTS - Induction SGAC - EVENTS - 1 P a g e CONTENTS CONTENTS... 2 WELCOME... 3 VISITING SGAC... 3 EMERGENCY PROCEDURES... 3 Warning Tones:... 4 It Is Important You Know The Location Of:... 4 If You Discover Smoke

More information

NEW EMPLOYEE ERGONOMIC WORKSHEET

NEW EMPLOYEE ERGONOMIC WORKSHEET NEW EMPLOYEE ERGONOMIC WORKSHEET DIRECTIONS New Employee: This document has been prepared to assist you and your supervisor in determining some of the items that you may need. After you have had an opportunity

More information

Risk Guide: Manual Handling

Risk Guide: Manual Handling Risk Guide: Manual Handling Date Description of Original Document/Amendments Prepared/Edited By 11/06/14 Initial Draft Jasmina Lozanovska 17/06/14 Released Version Jasmina Lozanovska 30/09/14 Released

More information

OFFICE SAFETY ESSENTIALS

OFFICE SAFETY ESSENTIALS OFFICE SAFETY ESSENTIALS Introduction Health and Safety at work is everyone's responsibility. It is important that you have a general understanding of safety and health The employer must ensure that your

More information

Job: Dock Gantry Operator Description: Operates the Dock Gantry Equipment Assessed: VanTerm Dock Gantry ESSENTIAL DUTIES

Job: Dock Gantry Operator Description: Operates the Dock Gantry Equipment Assessed: VanTerm Dock Gantry ESSENTIAL DUTIES Job: Dock Gantry Operator Description: Operates the Dock Gantry Equipment Assessed: VanTerm Dock Gantry ESSETIAL DUTIES 1. Operating the Dock Gantry A) Sitting B) Handling Controls C) Operating Foot Pedals

More information

Manual handling assessment charts (the MAC tool) Introduction DRAFT

Manual handling assessment charts (the MAC tool) Introduction DRAFT Manual handling assessment charts (the MAC tool) This is a web-friendly version of leaflet INDG383(rev1), published 01/14 Introduction Work-related musculoskeletal disorders (MSDs), including manual handling

More information

TECHNICAL INFORMATION SHEET 17. Revision 1 : 2016 MODEL RISK ASSESSMENT FOR THE MANUAL HANDLING OF GAS CYLINDERS

TECHNICAL INFORMATION SHEET 17. Revision 1 : 2016 MODEL RISK ASSESSMENT FOR THE MANUAL HANDLING OF GAS CYLINDERS TECHNICAL INFORMATION SHEET 17 Revision 1 : 2016 MODEL RISK ASSESSMENT FOR THE MANUAL HANDLING OF GAS CYLINDERS Copyright 2016 by British Compressed Gases Association. First printed 2009. All rights reserved.

More information

Health & Safety and Employment Law

Health & Safety and Employment Law Health & Safety and Employment Law Manual Handling Health and safety training for employees The definition of Manual Handling The transporting or supporting of a load, including the lifting, putting down,

More information

1 P a g e. Moving & Handling Procedure. Title: Reference No: Procedure 01. Assistant Chief Officer. Ian Plummer, Health & Safety Manager

1 P a g e. Moving & Handling Procedure. Title: Reference No: Procedure 01. Assistant Chief Officer. Ian Plummer, Health & Safety Manager Title: Moving & Handling Procedure Reference No: Procedure 01 Owner: Author Assistant Chief Officer Ian Plummer, Health & Safety Manager First Issued On: Latest Issue Date: August 2016 Operational Date:

More information

One Direct Manual Handling Guidance

One Direct Manual Handling Guidance Author Version V1 One Direct Health and Safety Date Issued December 2016 Review Date May 2018 What s the problem? Incorrect manual handling is one of the most common causes of injury at work. It causes

More information

Health and Safety Services. Safety Guide 37. Manual Handling. Facilities Management Directorate

Health and Safety Services. Safety Guide 37. Manual Handling. Facilities Management Directorate Health and Safety Services Safety Guide 37 Manual Handling Facilities Management Directorate Safety Guide 37 Manual Handling Manual Handling Contents Summary... ii Manual handling assessment flow chart...iii

More information

Ergonomics: Assessments and Evaluations for Job Improvements. Travis Ellis, CSP, CHMM

Ergonomics: Assessments and Evaluations for Job Improvements. Travis Ellis, CSP, CHMM AND/OR AND/OR AND = Force Awkward Posture Repetition Long Duration Increased Ergo Risk Ergonomics: Assessments and Evaluations for Job Improvements Travis Ellis, CSP, CHMM Course Objectives: 1. Identify

More information

Tailgate Topic Review

Tailgate Topic Review [PP 03/04/2018-03/17/2018] Lifting/Carrying/MH Lifting/Walking CONSTRUCTION INSPECTOR, 7291 (Specifications) Physical Requirements: Strength to perform average lifting up to 15 pounds and occasionally

More information

Preventing Musculoskeletal Injuries (MSIs) in Manufacturing

Preventing Musculoskeletal Injuries (MSIs) in Manufacturing 7-Step Process to Reduce the Risk of MSI B.C. s Occupational Health and Safety Regulation requires employers to eliminate or, if that is not practicable, minimize the risk of musculoskeletal injury to

More information

Chapter 13: Manual Handling

Chapter 13: Manual Handling Chapter 13: Manual Handling Learning Outcomes: 1. Define the term manual handling, 2. Know the activities involve manual handling, 3. Know types of injuries caused by manual handling, 4. Know the risk

More information

Thrower s Maintenance Program

Thrower s Maintenance Program Thrower s Maintenance Program Elbow at 90 and fixed at side. Pull out with arm keeping elbow at side Elbow at 90 and fixed at side. Pull arm into body keeping elbow at side. Shoulder at 90 and elbow at

More information

MSD RISK ASSESSMENT. Risk Factor "Potential Risk" "High Risk" Contact Stress Repetition Grip Force Lift/Lower Force Awkward Posture Vibration WSPS.

MSD RISK ASSESSMENT. Risk Factor Potential Risk High Risk Contact Stress Repetition Grip Force Lift/Lower Force Awkward Posture Vibration WSPS. Job or Task: Date: Completed by: Once a potential risk of a musculoskeletal disorder (MSD) has been identified, the purpose of this risk assessment is to determine if a high risk of injury exists. We recommend

More information

Shoulder Exercises for Combined Labrum Repair Rehabilitation Protocol

Shoulder Exercises for Combined Labrum Repair Rehabilitation Protocol Shoulder Exercises for Combined Labrum Repair Rehabilitation Protocol The exercises illustrated and described in this document should be performed only after instruction by your physical therapist or Dr.

More information

U.S. Shooting Team Balance, Strength and Stability Workout. Training Work-Out

U.S. Shooting Team Balance, Strength and Stability Workout. Training Work-Out U.S. Shooting Team Balance, Strength and Stability Workout Training Work-Out Modified by Dan Durben and Sommer Wood November 2006 from the program originally developed by Amber Darland for the USA Shooting

More information

Horizon Care and Education Group Limited MANUAL HANDLING POLICY

Horizon Care and Education Group Limited MANUAL HANDLING POLICY Purpose. The purpose of the policy is outline ensure that Horizon Care and Education Group meets it Health and Safety obligations, under Manual Handling Operations Regulations 1992. Scope The policy applies

More information

Bioscience Laboratory Ergonomic Check List

Bioscience Laboratory Ergonomic Check List Bioscience Laboratory Ergonomic Check List Laboratory workers should have a basic understanding of ergonomic principles, and be able to recognise risk factors and symptoms. associated with poor ergonomic

More information

MSD Hazard Identification Tool: Option 2

MSD Hazard Identification Tool: Option 2 MSD Hazard Identification ool: Option 2 his MSD Hazard Identification ool is provided to help you identify jobs or tasks that have MSD hazards, where workers may be at an increased risk of developing an

More information

WorkWell Consulting Ergonomic Risk Identification & Assessment. Job Title: Equipment Operator III (Sweeper) Elgin Ford #2108 Date: September 17, 2003

WorkWell Consulting Ergonomic Risk Identification & Assessment. Job Title: Equipment Operator III (Sweeper) Elgin Ford #2108 Date: September 17, 2003 TASK ANALYSIS WORKSHEET Company: The Corporation of Delta Department: Engineering Operations Job Title: Equipment Operator III (Sweeper) Elgin Ford #208 Date: September 7, 2003 Job Summary: The Sweeper

More information

U.S. Shooting Team Balance, Strength and Stability Workout. Shooting Warm-Up

U.S. Shooting Team Balance, Strength and Stability Workout. Shooting Warm-Up U.S. Shooting Team Balance, Strength and Stability Workout Shooting Warm-Up Modified by Dan Durben and Sommer Wood from the program originally developed by Amber Darland for the USA Shooting National Rifle

More information

MANUAL HANDLING CODE OF PRACTICE

MANUAL HANDLING CODE OF PRACTICE MANUAL HANDLING CODE OF PRACTICE 1. Introduction For some years national statistics have shown that more than a quarter of accidents reported are associated with the manual handling of loads. Sprains and

More information

Environmental Health & Safety Programs

Environmental Health & Safety Programs 1.0 Introduction Material handling accounts for approximately 25% of all occupational injuries. Common injuries include strains, sprains, fractures, and bruises. The largest number of injuries occur to

More information

Safety Toolkit and Short Guide to General Application Regulations 2007 Manual Handling Section. Manual Handling

Safety Toolkit and Short Guide to General Application Regulations 2007 Manual Handling Section. Manual Handling Manual Handling Section Manual Handling Introduction Safety Toolkit The objective of the Toolkit is to provide guidance on the prevention of accidents or ill health at work and to provide a practical tool

More information

1. BALANCE. KNEELING FORWARD TO STAND BACKWARDS Stand backward with static arm position.

1. BALANCE. KNEELING FORWARD TO STAND BACKWARDS Stand backward with static arm position. Technical Exercises Seniors 3* (Ref. Guidelines for Judges) Effective 1 January 2019 Two of the five exercises were reviewed by the FEI Vaulting Technical Committee and will be replaced for Vaulting season

More information

Soft-Over-Ball. Exercise Chart.

Soft-Over-Ball. Exercise Chart. Lay on your stomach, your head on your hands. Contract your thighs. Press your pubic bone into the mat while lifting your belly-button as if an ice cube was underneath. Place the Mambo Max Soft- Over-Ball

More information

CRUTCHES, WALKERS & CANES

CRUTCHES, WALKERS & CANES CRUTCHES, WALKERS & CANES Walking Aids to Get You On Your Feet Again When You Need a Walking Aid Do you have an injury or condition that makes it harder for you to get around? A walking aid (crutches,

More information

List 4 Example Of How Manual Handling Risks Can Be Reduced

List 4 Example Of How Manual Handling Risks Can Be Reduced List 4 Example Of How Manual Handling Risks Can Be Reduced Risk assessment for reduced handling capacity (staff) So for example a possible risk (2) of a medium severity injury requiring 3 days away from

More information

Vaulting Compulsories

Vaulting Compulsories Vaulting Compulsories The compulsories are seven exercises done in a series by all vaulters. They are the foundation of gymnastics done on the vaulting barrel and the horse. The compulsories are used to

More information

and crutches after surgery before, during and after your surgery

and crutches after surgery before, during and after your surgery A Walking New Knee Aids for for You HIP YOUR AND GUIDE KNEE TO REPLACEMENT KNEE REPLACEMENT PATIENTS How to What fit and to safely do and use what your to expect walker, cane and crutches after surgery

More information

WORK HEALTH AND SAFETY

WORK HEALTH AND SAFETY Employees in South Australia are protected by and required to adhere to State & National health and safety regulations. Employers, employees and others all have an important role to play. For further information

More information

S t r e t c h i n g E x e r c i s e s

S t r e t c h i n g E x e r c i s e s Stretches for side of neck: 1. Sit or stand with arms hanging loosely at sides 2. Turn head to one side, then the other 3. Hold for 5 seconds, each side 4. Repeat 1 to 3 times Stretches For the side of

More information

HEALTH & SAFETY GUIDANCE FOR MANAGERS MINIMUM SPECIFICATIONS REQUIRED FOR OFFICE FURNITURE AND DISPLAY SCREEN EQUIPMENT (DSE)

HEALTH & SAFETY GUIDANCE FOR MANAGERS MINIMUM SPECIFICATIONS REQUIRED FOR OFFICE FURNITURE AND DISPLAY SCREEN EQUIPMENT (DSE) HEALTH & SAFETY GUIDANCE FOR MANAGERS MINIMUM SPECIFICATIONS REQUIRED FOR OFFICE FURNITURE AND DISPLAY SCREEN EQUIPMENT (DSE) TRAINING Managers need to ensure that any of their staff who are classed as

More information

Air Conditioner Installer Initial work capacity form

Air Conditioner Installer Initial work capacity form Purpose of this form Air Conditioner Installer This form is designed to be completed by injured workers and their supervisors and/or the return to work coordinator, if applicable; to determine the tasks

More information

Beginning Softball Pitching Adapted from a guide created by Stan VanderSlik

Beginning Softball Pitching Adapted from a guide created by Stan VanderSlik Beginning Softball Pitching Adapted from a guide created by Stan VanderSlik Pitching a softball is not like throwing a softball. Pitching is an underhand motion that, when done correctly, can result in

More information

WORK METHOD STATEMENT CARPET LAYING

WORK METHOD STATEMENT CARPET LAYING ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone

More information

Manual Handling Risk Assessment Procedure (HS.1.09)

Manual Handling Risk Assessment Procedure (HS.1.09) LTD Manual Handling Risk Assessment Procedure () MANUAL HANDLING RISK ASSESSMENT GUIDANCE NOTE Contents Section 1: Introduction Section 2: Risk Assessment Section 3: General Guidelines Section 4: Team

More information

Chapter 13: Manual Handling

Chapter 13: Manual Handling Chapter 13: Manual Handling Learning Outcomes: After successful studying this chapter, You should be able to: 1. Define the term manual handling, 2. Know the activities involved in manual handling, 3.

More information

Deans, Directors, Heads of Schools and Departments and Research Institute Directors and Managers

Deans, Directors, Heads of Schools and Departments and Research Institute Directors and Managers Working at Height 1. PURPOSE 1.1 To ensure that any work at height is carried out in accordance with the legal requirements and associated guidance. This includes the use of scaffolds, towers, ladders,

More information

EXERCISE GUIDE STRENGTHEN YOUR CORE

EXERCISE GUIDE STRENGTHEN YOUR CORE EXERCISE GUIDE STRENGTHEN YOUR CORE BACK EXTENSION WITH BALL Rest your belly on the ball, feet planted wide apart on the floor behind you and hands resting on your lower back. Peel your chest away from

More information

ISS Safety Rules. Make safety second nature

ISS Safety Rules. Make safety second nature ISS Safety Rules Make safety second nature 2 ISS SAFETY RULES ISS SAFETY RULES 3 INTRODUCTION We are a company driven by close to 500,000 strong people spread across 77 countries around the globe. And

More information

BASICS OF MANUAL HANDLING SAMPLE COURSE HANDBOOK. HSM Safety Management

BASICS OF MANUAL HANDLING SAMPLE COURSE HANDBOOK. HSM Safety Management BASICS OF MANUAL HANDLING COURSE HANDBOOK THIS PAGE INTENTIONALLY LEFT BLANK BASICS OF MANUAL HANDLING COURSE HANDBOOK FIRST EDITION 2011 C. N. PERRY MBA PgD CMIOSH AIIRSM RMaPS NOTE: The legislation and

More information

Process Name Material Handling/MSD Prevention Program

Process Name Material Handling/MSD Prevention Program CNM WAY PROCESS CNM Process Name Material Hanling/MSD Prevention Program (04/10/2018 Revision) Overview of Material Hanling/MSD Prevention Program Purpose: To provie a safe an healthy working environment

More information

HEALTH & SAFETY ARRANGEMENTS FOR MANAGEMENT OF WORK AT HEIGHT

HEALTH & SAFETY ARRANGEMENTS FOR MANAGEMENT OF WORK AT HEIGHT HEALTH & SAFETY ARRANGEMENTS FOR MANAGEMENT OF WORK AT HEIGHT INTRODUCTION Cwmni CYNNAL recognises that accidents can arise from working at height. Falls from height can be a cause of injury and absence

More information

Slips, Trips and Falls

Slips, Trips and Falls This document is intended to provide basic safety guidelines for the Physical Plant Department at Community College of Allegheny County. The information provided in this guide may vary by site. Version

More information

CONTRACTOR SAFETY INDUCTION HANDBOOK

CONTRACTOR SAFETY INDUCTION HANDBOOK CONTRACTOR SAFETY INDUCTION HANDBOOK As a valued contractor for Total Group we would ask that you read and carefully consider the details included in this document. Total Group carry out work for a number

More information

HIPS Al\ID Gala5ynWrlght '94

HIPS Al\ID Gala5ynWrlght '94 HIPS Al\ID GLUTEALS @K Gala5ynWrlght '94 n1 1111 Lie on your back on a table with both legs hanging over the edge at the knees. Inhale, flex one hip, and raise your knee toward your chest; interlock your

More information

PARTNER With all partner stretches: communicate with partner and use caution!!

PARTNER With all partner stretches: communicate with partner and use caution!! - warm up prior to stretching - isolate the muscle group to be stretched - move slowly and smoothly into stretch - use proper mechanics and correct alignment - breathe normal - slowly come out of stretch

More information

This guidance note gives simple, practical advice on what can be done to eliminate or reduce the risks.

This guidance note gives simple, practical advice on what can be done to eliminate or reduce the risks. Health and Safety Guidance Note MANUAL HANDLING A guide for Managers, Heads of Departments Introduction Manual handling operations currently account for approximately 35% percent of all reported industrial

More information

HIP PRECAUTIONS INFORMATION

HIP PRECAUTIONS INFORMATION HIP PRECAUTIONS INFORMATION PAGE Hip Precautions Sitting Safely Following Precautions 1-2 Hip Safety: Sleeping Positions Safe Sleeping 3-4 Hip Safety: Getting Into and Out of Bed 5-6 Hip Safety Sitting

More information

LADDERS FIXED AND PORTABLE

LADDERS FIXED AND PORTABLE CONTRACTOR WHS HAZARD STANDARD LADDERS FIXED AND PORTABLE EXTERNAL USE ONLY Principles in the Optus Contractor WHS management process CONTRACTOR MANAGEMENT STAGES PRINCIPLES THIS STANDARD REQUISITION Requisition

More information

Baseball Training Program

Baseball Training Program Baseball Training Program Always consult your physician before beginning any exercise program. The information and advice published or made available through the Orthopaedic and Neurosurgery Specialists,

More information

LEVEL 1 SKILL DEVELOPMENT MANUAL

LEVEL 1 SKILL DEVELOPMENT MANUAL LEVEL 1 SKILL DEVELOPMENT MANUAL Lesson Manual C A Publication Of The USA Hockey Coaching Education Program The USA Hockey Coaching Education Program is Presented By LESSON C-1 SPECIFIC OBJECTIVES 1. Refine

More information

Manual Handling Safety Procedure

Manual Handling Safety Procedure Pars Oil & Gas Company Manual Handling Safety Procedure HEALTH, SAFETY AND ENVIRONMENT PROCEDURE Manual Handling Safety Procedure DOCUMENT ID - PR-26-POGC-001 REVISION 0.0 Pars Oil & Gas Company Pages

More information

PAC. Risk Management Resources. The cost of Workers Compensation can be controlled. Also visit WELLAdvised

PAC. Risk Management Resources. The cost of Workers Compensation can be controlled. Also visit   WELLAdvised PAC Risk Management Resources The cost of Workers Compensation can be controlled Also visit www.babbins.com WELLAdvised Safety Guidelines for Home Visits 1) Do not give consumers your home phone number.

More information

Bicycle Power Research and Design Factors

Bicycle Power Research and Design Factors Bicycle Power Research and Design Factors Background Summary: Human powered machinery is a great way to supply energy to a machine where electricity is not readily available or reliable. In designing the

More information

Appendix 23- A: Physical Risk Factor Ergonomic Checklist

Appendix 23- A: Physical Risk Factor Ergonomic Checklist The Physical Risk Factor Ergonomic Checklist is a tool used in work places to identify and evaluate ergonomic stressors. The checklist can be used for typical work activities, which are a regular and foreseeable

More information

MSD HAZARD IDENTIFICATION FORM

MSD HAZARD IDENTIFICATION FORM MSD HAZARD IDENTIFICATION FORM Job Title Task Assignment Job Code (if used) Essential Safety Resources Location Location of Assessment Identification Applies to the Following Locations Date Completed by

More information

Valley View Copy Shop: POLICIES & PROCEDURES

Valley View Copy Shop: POLICIES & PROCEDURES EMPLOYERS RESPONSIBILITIES Valley View Copy Shop is responsible for providing a safe environment free from discrimination and sexual harassment. EMPLOYEES RESPONSIBILITIES All employees are responsible

More information

Techniques To Treat Your Pain At Home (512)

Techniques To Treat Your Pain At Home (512) Techniques To Treat Your Pain At Home (512) 288-5322 7010 W. TX-71 Suite 360 Austin TX, 78735 Arm Only Bird Dog Start in the quadruped position (all fours) with arms and thighs perpendicular to the floor.

More information

Task: Transport a Casualty Number:

Task: Transport a Casualty Number: Task: Transport a Casualty Number: 081-831-1046 Effective Date: 2003-Aug-31 Enlisted MOS: COM Skill Level 1 STP: STP 21-1-SMCT TASK FORCE SOLDIER Conditions: You have evaluated and given first aid to a

More information

HEALTH AND SAFETY GUIDANCE NOTE MANUAL HANDLING

HEALTH AND SAFETY GUIDANCE NOTE MANUAL HANDLING HEALTH AND SAFETY GUIDANCE NOTE MANUAL HANDLING INTRODUCTION Manual handling is interpreted as the transporting or supporting of any load (which also includes a person or an animal). It involves a variety

More information

RJT. Pupil Task Cards: Throwing JUMP THROW RUN

RJT. Pupil Task Cards: Throwing JUMP THROW RUN RJT s: Throwing RUN JUMP THROW s: Introduction Introduction to the s An important part of every child s cognitive development is to encourage them to explore new things and use self-guided learning to

More information

Manual Handling - Theory

Manual Handling - Theory Manual Handling - Theory Manual Handling can be defined as any transporting, supporting of a load, lifting, pushing, putting down, pulling, carrying or moving of any load. The load includes a person, it

More information

Manual handling at work

Manual handling at work Manual handling at work A brief guide Introduction This leaflet describes what you, as an employer, may need to do to protect your employees from the risk of injury through manual handling tasks in the

More information

Manual Handling Policy

Manual Handling Policy Manual Handling Policy Version No V1.0 DRAFT Author Date Comments Approved by Bridget Meats 2-10-15 Recommended for Approval by H&S Group V1.0 29-10-15 APPROVED For approval by QRC V2.0 13-10-16 Recommended

More information

OVERVIEW FOR STUNTS FLYER BODY POSITIONS

OVERVIEW FOR STUNTS FLYER BODY POSITIONS TCI MODULE 6 Stunts Level 1 Page 1 of 11 OVERVIEW FOR STUNTS FLYER BODY POSITIONS *** NOTE *** For instruction purposes, we will assume regular flyer positions in this manual. That is, it is assumed that

More information

CHAPTER 4 ADVANCED GROUND-FIGHTING TECHNIQUES

CHAPTER 4 ADVANCED GROUND-FIGHTING TECHNIQUES (FM 21-150) CHAPTER 4 ADVANCED GROUND-FIGHTING TECHNIQUES After achieving an understanding of the basics of ground fighting, other elements of fighting on the ground are added. These techniques, however,

More information

General Purpose Slings Instruction & Safety Manual

General Purpose Slings Instruction & Safety Manual General Purpose Slings Instruction & Safety Manual Please read this manual before operation, for maintenance instructions and safe usage The enabling power of applied knowledge General Purpose Slings Instruction

More information

TACTICAL COMBATIVES COURSE STUDY GUIDE

TACTICAL COMBATIVES COURSE STUDY GUIDE TACTICAL COMBATIVES COURSE STUDY GUIDE STANDING TECHNIQUES 1. ROUND KICK (All Minor Tasks) 1. Push off on the ball of your trail leg foot, and then step somewhat toward the target and laterally to the

More information

Occupational Health & Safety

Occupational Health & Safety Personal Development Level 3 Occupational Health & Safety Any injury particularly workplace injury is a major cause of concern for all involved in Occupational Health and Safety (OHS). The factors which

More information

Age Concern Hounslow Manual Handling Risk Assessment PART ONE PRELIMINARY RISK ASSESSMENT

Age Concern Hounslow Manual Handling Risk Assessment PART ONE PRELIMINARY RISK ASSESSMENT Age Concern Hounslow Manual Handling Risk Assessment PART ONE PRELIMINARY RISK ASSESSMENT This checklist is to be used as a preliminary assessment of the work area. If the answer is yes or possibly, then

More information

NIOSH Equation Outputs: Recommended Weight Limit (RWL): Lifting Index (LI):

NIOSH Equation Outputs: Recommended Weight Limit (RWL): Lifting Index (LI): The NIOSH Equation is a tool used by occupational health and safety professionals to assess the manual material handling risks associated with lifting and lowering tasks in the workplace. This equation

More information

CHAPTER 7:SIT- SKI. General. Student Assessment

CHAPTER 7:SIT- SKI. General. Student Assessment CHAPTER 7:SIT- SKI General A Sit -Ski is used mainly by people with limited use (or absence) of their lower extremities. A sit-ski, consists of a molded seat (bucket) mounted on a metal frame. The bucket

More information

Handout 4: Yoga Movement for Chronic Pain

Handout 4: Yoga Movement for Chronic Pain Handout 4: Yoga Movement for Chronic Pain Yoga can be an effective practice for chronic pain management. Instructions for five poses are included here: 1) Seated Lateral Stretch, 2) One-legged Butterfly,

More information

Formwork Labourer Initial work capacity form

Formwork Labourer Initial work capacity form Purpose of this form Formwork Labourer This form is designed to be completed by injured workers and their supervisors and/or the return to work coordinator, if applicable; to determine the tasks the worker

More information

International Waterski & Wakeboard Federation Disabled Council

International Waterski & Wakeboard Federation Disabled Council International Waterski & Wakeboard Federation Disabled Council Competition Handbook Water Ski for the Disabled Addendum Classification Appendices Issued by the Disabled Council **February, 4, 2019** TABLE

More information

Getting to grips with manual handling

Getting to grips with manual handling Health and Safety Executive Getting to grips with manual handling A short guide 2 This booklet explains the problems associated with manual handling and sets out best practice in dealing with them. The

More information

ONE MILE RUN. Aerobic Capacity Test Option 1

ONE MILE RUN. Aerobic Capacity Test Option 1 ONE MILE RUN Aerobic Capacity Test Option 1 Run one mile as quickly as possible. If a student cannot run the entire mile, walking is permitted. Students will begin on the signal Ready, Start. If necessary,

More information

Business Safety Leadership. Part 3: Collision and Injury Prevention Training

Business Safety Leadership. Part 3: Collision and Injury Prevention Training Business Safety Leadership Part 3: Collision and Injury Prevention Training 1 Outline Focus on the importance of preventing incidents Working behavior observation process Safe driving, speed and space

More information

GOLF SPECIFIC DYNAMIC WARM UP

GOLF SPECIFIC DYNAMIC WARM UP GOLF SPECIFIC DYNAMIC WARM UP Golf-related injury is common. The three most common areas injured include: 1. The back 2. The wrists, and 3. The elbows. A golf-specific dynamic warm-up is recommended by

More information

Policy Redesign Project. Plant Safety Policy. Table of Contents

Policy Redesign Project. Plant Safety Policy. Table of Contents Policy Redesign Project All policies and procedures are being reviewed as part of this project. This document is pending review, but remains in effect until the review is carried out. Plant Safety Policy

More information

Warm Ups. Standing Stretches

Warm Ups. Standing Stretches Warm Ups Mild warm-ups are a necessity for everyone. The need for warm-ups increases with age as the body becomes less elastic over time. It is recommended that you execute the warm-up routine in this

More information

Ab Plank with Straight Leg Raise

Ab Plank with Straight Leg Raise Ab Plank with Straight Leg Raise Position yourself face up with your knees bent at 90 degrees, feet flat on the floor. Your hands should be directly under your shoulders facing forward. While in this position

More information