TKF Mass Flow Controller. FCS Thermal Series. Digital interface 준비장비 (RS-485)
|
|
|
- Isabel Boyd
- 6 years ago
- Views:
Transcription
1 TKF Mass Flow Controller FCS Thermal Series Digital interface 준비장비 (RS-485)
2 ORDERING INFORMATION FCST1000MZDC-4J2-F20L-AR-R1-CR-U*** FLOW CONTROL SYSTEM Sensor Type T:Mass Flow Controller TM:Mass Flow Meter 3 Seal material None:Elastomer M:Metal 6 Valve operating mode C:Normally closed Blank:Normally open 8 Full scale F20 : 20SCCM F20L:20SLM 9 Gas type Example:AR, HE, SIH4 (A capital letter indicates a gas name.) 2 Series Single Gas , 20, 30, 50, 100, 200, 300, 500 SCCM 1, 2, 3, 5 SLM , 10, 20, 30 SLM , 40, 50 SLM , 150, 200 SLM , 300, 400, 500 SLM Multi Gas , SCCM 1, 3 SLM , 30 SLM SLM 10**MF(C)-HT 高温用 DIMENSIONS 4 MGMR 7 End connection/face To Face dimension 10 Bin Numbers Blank:Single Gas 4J2 : 1/4 UJR 124mm R1(Bin 1): Single Range 4F2 : 1/4 F mm R2(Bin 2): Z:Multi Gases 4CW1 : 1.125W 79.8mm R3(Bin 3): Multi Ranges 4CW2 : 1.125W 92mm R4(Bin 4): 4CL2 : 1.125C seal, 92mm R5(Bin 5): 4WS1 : 1.5W 79.8mm R6(Bin 6): 4WS2 : 1.5W 92mm R7(Bin 7): 5 Communication Interface R8(Bin 8): 6J3 : 3/8 UJR 192.4mm L: Analog 6F3 : 3/8 F mm F: Analog/Digital 8J3 : 1/2 UJR 199mm 11 O-Ring Material D: DeviceNet TM 8F3 : 1/2 F mm Blank:FKM CR:Chloroprene Rubber 13 user specification Example: atm Flow Rate Unit : CCM,LM 10SCCM~ 31SCCM~ 101SCCM~ 301SCCM~ 1001SCCM~ 3001SCCM~ 10001SCCM~ 30001SCCM~ 30SCCM 100SCCM 300SCCM 1000SCCM 3000SCCM 10000SCCM 30000SCCM 50000SCCM 12 D-sub 9pin connector screw Blank:M3 U:inch UJR/F900/High Flow Type IGS Type UJR/F900 TYPE A (UJR) A (F900) C D E H I J K L M T1000/T1000L T1000M/T1000M-HT IGS TYPE A B C D E (1.5W) E (1.125w) F G (1.5w) G (1.125w) T1000/T1000L T1000M/T1000M-HT 92/ / HIGH FLOW TYPE A (UJR) A (F900) C E H I M T TM T TM
3 FCS SERIES LEAD THE FLOW CONTROL TECHNOLOGY OPERATING PRINCIPLES When gas flows through a Mass Flow Controller, temperature changes are detected at the thermal sensor. This temperature gradient is used to compute the mass flow rate. Each gas has specific ability to transfer heat (called heat capacity) dictated by the physical structure of the gas molecules. A Mass Flow Controller proportionally controls the flow rate to a given flow set point. INTERNAL STRUCTURE D-Sub 9 pin connector RS485 interface (No communication port for FCST1000L) Proportional Control Circuit Solenoid Valve Thermal Sensor Both Metal and Elastomer seals are available Bypass MULTI GAS / MULTI RANGE (FCST1000Z) REDUCE INVENTORY AND CUT DOWN LEAD TIME Multi-Gas/ Multi-Range (MG-MR) MFCs enable better inventory management by reducing inventory. MFCs can be programmed to different flow rates and gases within specific bin sizes. IMPROVED FLOW ACCURACY N2 / 500sccm He / 1000sccm CL2/ 500sccm SiH4/200sccm CH4 /500sccm SF6 /200sccm *Incorporated highly accurate bypass element *Improved gas flow accuracy by optimizing gas data for each bin Easy to change gas and flow rate by users!
4 SUPERIOR RESPONSE (FCST1000F/FCST1000Z) PROGRESSIVE PID TECHNOLOGY : RESPONSE TIME IS 1 SECOND FOR ANY GIVEN SET POINT DIGITAL COMMUNICATION INTERFACE (FCST1000FD/FCST1000ZD) Many semiconductor tools use programmable logic controllers. Recently many digital communication devices have been developed to reduce cables and cost. FCS series MFCs are available in DeviceNetTM and RS485 communication interface, which enables elimination of Analog/Digital convertors and direct connection to a PLC. Each MFC can be connected in parallel, which reduces cables and possible manufacturing cost reduction. EtherCAT digital communication interface will be available in the future PLC DIGITAL COMMUNICATION INTERFACE (FCST1000FD/FCST1000ZD) All digital MFCs (including DeviceNet TM ) have a RS485 digital communication function, which enable the user to monitor the flow performance using a Graphic User Interface and aid in trouble-shooting. APPLICATION SOFTWARE Installed various applications RS485 Convertor MFC (T1000/T2000) MFC Power Supply 1 channel Monitoring Software for Digital communication (Graphic Monitor, Flow Control, Alarm, etc.) 1 channel Monitoring Software for DeviceNetTM communication (Graphic Monitor, Full Scale, Hexadecimal Monitoring, Assembly) 9 channels Monitoring Software for Digital communication (Graphic Monitor, Step Sequence Control, Alarm etc.) Multi Gas/Multi Range Configuration Software for FCST1000Z series (Enable changing gas and full scale flow range) MAC ID Setting Software (Enable changing MAC ID setting) DeviceNetTM Configuration Software (Enable changing Hexadecimal Full Scale, Input, Output, etc.)
5 FCST1000(M)Z SPECIFICATIONS Model Number FCST1005(M)ZF/TM1005(M)ZF FCST1005(M)ZD(DeviceNer TM )/TM1005(M)ZD FCST1030(M)ZF/TM1030(M)ZF FCST1030(M)ZD(DeviceNer TM )/TM1030(M)ZD FCST1050(M)ZF/TM1050(M)ZF FCST1050(M)ZD(DeviceNer TM )/TM1050(M)ZD Flow Range (N2 Equivalent) Valve Type Controlled Volume Range Flow Accuracy Setting Signal Output Signal Repeatability Response Time Required Pressure Difference Bin 1 : 10SCCM ~ 30SCCM Bin 2 : 31SCCM ~ 100SCCM Bin 3 : 101SCCM ~ 300SCCM Bin 4 : 301SCCM ~ 1000SCCM Bin 5 : 1001SCCM ~ 3000SCCM Bin 6 : 3001SCCM ~ 10000SCCM Bin 7 : 10001SCCM ~ 30000SCCM Bin 8 : 30001SCCM ~ 50000SCCM N/O: Normally Open, N/C: Normally Closed 2% ~ 100%F.S. 100% ~ 25% : ±1.0% of S.P., 25% ~ 2% : ±0.25%F.S. (Accuracy guaranteed between 15 ~ 35ºC) ±0.2%F.S. 1sec 50 ~ 300kPa (Ar : 100~300kPa) NO 50 ~ 300kPa (3SLM~10SLM) NO 150 ~ 300kPa (11SLM~30SLM) NO 50 ~ 300kPa (3SLM~10SLM) NO 100 ~ 300kPa (11SLM~30SLM) (Ar150 ~ 400kPa) 200 ~ 300kPa (Ar : 250~450kPa) MAX Operating Pressure 400kPaG (Ar : 500kPaG) Proof Pressure 1MPaG Guaranteed Operating Temperature Range 5 ~ 50 C External Leak Rate Metal Seal : 1X10-11 Pa m 3 / sec He, Elastomer Seal : 1X10-7 Pa m 3 / sec He Mounting Orientation Can be mounted in any orienation Current Consumption T1000ZF + 15VDC : 50mA, -15VDC : 200mA T1000ZD + 11 ~ + 24VDC, 5.5VA (5.5W) Communication Analog 0 ~ 5V D.C, Digital : RS485 (Fujikin Protocol), DeviceNer TM Wetted Surface Material 316L SS, Magnetic Stainless Steel, Hastelloy (Seneor), PTFE Seal Material Metal Seal : SUS316L, Elastomer Seal : Fluoro-Rubber (Chloroprene Rubber) Actuator Type Solenoid actuator Surface Finish None (Option : EP) Fittings 1/4" UJR, 1/4" F900, Wseal, 1/4" Cseal Digital Communication RS-485, Standard tranmission rate 38400bps, Maximum Connected units 127 This specification is for MFC. *1 At Fujikin flow rates (SCCM, SLM) are converted to values at 0 C, 101.3kPa abs (1 atm) for calibeation. *2 Reference temperature for temperature coefficient is 25 C. *3 Response time on SPEC sheet is the time to reach from minimum flow rate to ±2%F.S of setting flow rate.
6 FCST1000(M)F SPECIFICATIONS Model Number FCST1005(M)F/TM1005(M)F FCST1005(M)FD(DeviceNer TM )/TM1005(M)FD FCST1030(M)F/TM1030(M)F FCST1030(M)FD(DeviceNer TM )/TM1030(M)FD FCST1050(M)F/TM1050(M)F FCST1050(M)FD(DeviceNer TM )/TM1050(M)FD Flow Range (N2 Equivalent) Valve Type Controlled Volume Range Flow Accuracy Setting Signal Output Signal Repeatability Response Time Required Pressure Difference 10, 20, 30, 50, 100, 200, 300, 500SCCM 1, 2, 3, 5SLM 10, 20, 30SLM 40, 50SLM N/O: Normally Open, N/C: Normally Closed 2% ~ 100%F.S. ±1% F.S. (Accuracy guaranteed between 15~35ºC) ±0.2%F.S. 1sec 50 ~ 300kPa NO 50 ~ 300kPa (6SLM~10SLM) NO 100 ~ 300kPa (11SLM~20SLM) NO 150 ~ 300kPa (21SLM~30SLM) NO 50 ~ 300kPa (6SLM~10SLM) NO 100 ~ 300kPa (11SLM~30SLM) 200 ~ 300kPa MAX Operating Pressure 400kPaG Proof Pressure 1MPaG Guaranteed Operating Temperature Range 5 ~ 50 C External Leak Rate Metal Seal : 1X10-11 Pa m 3 / sec He, Elastomer Seal : 1X10-7 Pa m 3 / sec He Mounting Orientation Can be mounted in any orientation Current Consumption T1000F +15VDC : 50mA, -15VDC, 200mA T1000FD +11 ~ +24VDC, 5.5VA (5.5W) Communication Analog 0 ~ 5V DC, Digital: RS485 (Fujikin Protocol), DeviceNetTM Wetted Surface Material 316L SS, Magnetic Stainless Steel, PTFE Seal Material Metal Seal: SUS316L, Elastomer Seal: Fluoro-Rubber (Chloroprene Rubber) Actuator Type Solenoid actuator Surface Finish None (Option: EP) Fittings 1/4 UJR, 1/4 F900, 1/4 1.5 Wseal, 1/ Wseal, 1/ Cseal Digital Communication RS-485, Standard transmission rate 38400bps, Maximum connected units 127 This specification is for MFC. *1 At Fujikin flow rates (SCCM, SLM) are converted to values at 0 C, 101.3kPa abs (1 atm) for calibeation. *2 Reference temperature for temperature coefficient is 25 C. *3 Response time on SPEC sheet is the time to reach from minimum flow rate to ±2%F.S of setting flow rate.
7 FCST1000(M)L SPECIFICATIONS Model Number FCST1005(M)L/TM1005(M)L FCST1030(M)L/TM1030(M)L FCST1050(M)L/TM1050(M)L Flow Range (N2 Equivalent) 10, 20, 30, 50, 100, 200, 300, 500SCCM 1, 2, 3, 5SLM 10, 20, 30SLM 40, 50SLM Valve Type N/O: Normally Open (Released on June, 2012), N/C: Normally Closed Controlled Volume Range 2% ~ 100%F.S. Flow Accuracy ±1% F.S. (Accuracy guaranteed between 15~35ºC) ±2%F.S.(Accuracy guaranteed between15~35ºc) Setting Signal 0.1 ~ 5VDC Output Signal Repeatability ±0.2%F.S. Response Time 1sec 2sec Required Pressure Difference 50 ~ 300kPa 50 ~ 300kPa (6SLM~10SLM) 100 ~ 300kPa (10SLM~30SLM) 200 ~ 300kPa MAX Operating Pressure 400kPa Proof Pressure 1MPaG Guaranteed Operating Temperature Range 5 ~ 50 C External Leak Rate Metal Seal : 1X10-11 Pa m 3 / sec He, Elastomer Seal : 1X10-7 Pa m 3 / sec He Mounting Orientation Can be mounted in any orienation Current Consumption +15VDC : 25mA, -15VDC : 180mA Wetted Surface Material 316L SS, Magnetic Stainless Steel, PTFE Seal Material Metal Seal: SUS316L, Elastomer Seal: Fluoro-Rubber (Chloroprene Rubber) Actuator Type Solenoid actuator Surface Finish Machined Finish Fittings 1/4 UJR,1/4 F900,1/4 1.5 Wseal, Cseal This specification is for MFC. *1 At Fujikin, flow rates (SCCM, SLM) are converted to values at 0ºC, 101.3kPa abs (1atm) for calibration. *2 Reference temperature for temperature coefficient is 25ºC. *3 Response time on SPEC sheet is the time to reach from minimum flow rate to ±2%F.S. of setting flow rate.
8 FCST1200F, 1500F SPECIFICATIONS Model Number FCST1200F/TM1200F FCST1200FD/TM1200FD FCST1500F/TM1500F FCST1500FD/TM1500FD Flow Range (N2 Equivalent) 100, 150, 200SCCM 250, 300, 400, 500SLM Valve Type NO : Normally Open NC : Normally Close NC : Normally Close Controlled Volume Range 2% ~ 100%F.S. Flow Accuracy ±1% F.S. (Accuracy guaranteed between 15~35ºC) ±2% F.S. (Accuracy guaranteed between 15~35ºC) Setting Signal 0.1 ~ 5VDC Output Signal Linearity ±0.3%F.S. Repeatability ±0.5%F.S. Response Time 3sec Required Pressure Difference 100 ~ 300kPa 150 ~ 300kPa MAX Operating Pressure 700kPaG Proof Pressure 1MPaG Guaranteed Operating Temperature Range 5 ~ 45 C External Leak Rate Pa m 3 /sec He Mounting Orientation Can be installed in any attitude Current Consumption T1200F, T1500F +15VDC : 50mA, -15VDC : 350mA T1200FD, T1500FD +11~+24VDC, 8.5VA(8.5W) Communication Analog: 0~5VDC, Digital: RS485 (Fujikin Protocol), DeviceNet TM Wetted Surface Material 316 SS, PTFE, Fluoro-Rubber (Chloroprene Rubber) Seal Material Fluoro-Rubber or Chloroprene Rubber Actuator Type Solenoid actuator Surface Finish Machined Finish Fittings 3/8 UJR, 3/8 F900 1/2 UJR, 1/2 F900 Digital Communication RS-485, Standard transmission rate 38400bps, Maximum connected units 127 This specification is for MFC. *1 At Fujikin, flow rates (SCCM, SLM) are converted to values at 0ºC, 101.3kPa abs (1atm) for calibration. *2 Reference temperature for temperature coefficient is 25ºC. *3 Response time on SPEC sheet is the time to reach from minimum flow rate to ±2%F.S of setting flow rate.
9 FCST1000MF-HT SPECIFICATIONS Model Number FCST1005MF-HT/TM1005MF-HT FCST1005MFD-HT/TM1005MFD-HT FCST1030MF-HT/TM1030MF-HT FCST1030MFD-HT/TM1030MFD-HT FCST1050MF-HT/TM1050MF-HT FCST1050MFD-HT/TM1050MFD-HT Flow Range (N2 Equivalent) Valve Type Controlled Volume Range Flow Accuracy Setting Signal Output Signal Repeatability Response Time 10, 20, 30, 50, 100, 200, 300, 500SCCM 1, 2, 3, 5SLM 10, 20, 30SLM 40, 50SLM N/O: Normally Open, N/C: Normally Closed 2% ~ 100%F.S. ±1% F.S. (Accuracy guaranteed between 50~80ºC) 0.1 ~ 5VDC ±0.2%F.S. 1sec Required Pressure Difference 50 ~ 300kPa NO, NC 50~300kPa (6SLM~10SLM) NO 100~300kPa (11SLM~20SLM) 150~300kPa (21SLM~30SLM) NC 100~300kPa (11SLM~30SLM) 200 ~ 300kPa MAX Operating Pressure 400kPaG Proof Pressure 1MPaG Guaranteed Operating Temperature Range 50 ~ 80 C External Leak Rate 1 10 ¹Pam ³/sec He Mounting Orientation Can be mounted in any orientation Current Consumption T1000F +15VDC : 50mA, -15VDC, 200mA T1000MFD +11~24VDC,5.5VA(5.5W) Communication Analog 0 ~ 5V DC, Digital: RS485 (Fujikin Protocol), DeviceNetTM Wetted Surface Material 316L SS, Magnetic Stainless Steel, PTFE Seal Material 316L SS Actuator Type Solenoid actuator Surface Finish None (Option: EP) Fittings 1/4 UJR, 1/4 F900, 1/4 1.5 Wseal, 1/ Wseal, 1/ Cseal Digital Communication RS-485, Standard transmission rate 38400bps, Maximum connected units 127 This specification is for MFC. *1 At Fujikin, flow rates (SCCM, SLM) are converted to values at 0ºC, 101.3kPa abs (1atm) for calibration. *2 Reference temperature for temperature coefficient is 25ºC. *3 Response time on SPEC sheet is the time to reach from minimum flow rate to ±2%F.S of setting flow rate
10 FCS Thermal Series Head Office 7, Noksansandan 261-ro 88beon-gil, Gangseo-gu, Busan, Korea 2nd Factory 32, Hwajeonsandan 3-ro, Gangseo-gu, Busan, Korea TEL FAX tc@tk-fujikin.com TKF Rev
PS100 Series. Pressure-Based PI Mass Flow Controller. Catalog
PS100 Series Pressure-Based PI Mass Flow Controller Catalog PS100 Series Features Pressure-based flow measurement architecture Improved Pressure Insensitive function Valiant repeatability Self-diagnostic
CAT:No E-H FCS. Flow Control System. Thermal Series. We welcome customer feedback for all of our products and services.
CAT:No.75101EH FCS Flow Control System Thermal Series We welcome customer feedback for all of our products and services. TOTAL FCS SOLUTION COMPANY From Supplier To Total Solution Company for Gas Supply
Catalog. Series. Pressure Insensitive (PI) Mass Flow Controller. Series. Digital Mass Flow Controller (non-pi), Mass Flow Meter
Catalog Series Pressure Insensitive (PI) Mass Flow Controller Digital Mass Flow Controller (non-pi), Mass Flow Meter Series Features Quick flow-response, 0.3s (HG0 series) 10 millions life cycle, robust
SFC1480FX SFC2480FX series
Pamphlet SFC80FX SFC80FX series itachi Metals, Ltd. Passing along the tradition from F to FX, a SFC80FX SFC80FX series From F to FX: Passing along the tradition Since the first of our SFC80 series, SAM
Pamphlet. 1480G 2480G series. Hitachi Metals, Ltd.
Pamphlet 1480G 2480G series Hitachi Metals, Ltd. Proposal for a new generation 1480G 2480G series mass flow controller From the release of the first of our SFC480 series, SAM brand high-performance mass
Model 601CV. Mass Flow Controller. Product Features:
Model 601CV Mass Flow Controller Porter s Model 601CV Series II Mass Flow Controller (MFCs) is designed for precise control of virtually all conventional process gases. The MFC consists of a thermal mass
High Performance Mass Flow Controller
High Performance Mass Flow Controller 1 Introducing the remarkable, a break-through in mass flow control technology The mass flow controller, is a key piece of semiconductor manufacturing equipment. Its
Features. Main Voltage: Vdc. Input Control Signal: 0-5 Vdc or 4-20 madc (Sourcing) Monitor Output Voltage: 0-5 Vdc or 4-20 madc (Sourcing)
1 X-Flow Mass Flow Controller Flow Range from 0.8 ml/min to 20 l/min Target Markets Laboratory and Process Instrumentation Pharma / Bio-Pharma Equipment Air Quality Monitoring Systems Furnace and Coatings
Mass Flow Controller (MFC) for Gases
Mass Flow Controller (MFC) for Gases Bypass MFC with capillary technology for nominal flow rates from ml N /min to 0 l N /min Applicable for aggressive gases Fieldbus option Type 870 can be combined with...
Aera Industrial MFC Product Guide. Innovative Control at Work
Aera Industrial MFC Product Guide Innovative Control at Work c o n t e n t s 2 what is a mass flow controller? 3 fundamentals of mass flow measurement 4 nomenclature 5 operating principle 5 digital mass
Mass Flow Controllers
Mass Flow Meters & Controllers HFM-D-3A & 305A Mass Flow Meters HFC-D-3A & 307A Mass Flow Controllers FEATURES Range 0-25 slm to 0-2500 slm (N 2 Equivalent) Excellent Accuracy ±(0.5% of Reading + 0.2%
Mass Flow Controller (MFC) for Gases
Mass Flow Controller (MFC) for Gases Bypass MFC with capillary technology for nominal flow rates from 5 ml N /min to 15 l N /min Applicable for aggressive gases Compact design and digital communication
GAS Solenoid Actuator Type Mass Flow Controllers
5 GAS Solenoid Actuator Type Mass Flow Controllers Smaller, less expensive equipment offering more functions is now considered a primary factor in increasing productivity. The demand for smaller, more
Aera PI-980 Series Pressure- Insensitive MFCs
Catalog Aera PI-980 Series Pressure- Insensitive MFCs Next-generation PI technology for tomorrow s manufacturing demands Benefits Improved gas delivery performance and production yields Easy integration
AFC. SDPROC and AFC Analog Mass Flow Controller ANALOG MASS FLOW CONTROLLERS. Principles of Operation. Design Features
ANALOG MASS FLOW CONTROLLERS Model AF mass fl ow controllers are designed to indicate fl ow rates and control set fl ow rates of gases. Each of these units incorporates an advanced straight tube sensor
Analogue and Digital Mass Flow Meters and Controllers for Gases MASS-STREAM
Analogue and Digital Mass Flow Meters and Controllers for Gases MASS-STREAM M+W Instruments Your partner Key Facts M+W Instruments was founded in 1988 and has always specialised in thermal mass flow meters
Precision Mass Flow Meters / Controllers for Liquids and Gases
CORI-FLOW TM Precision Mass Flow Meters / Controllers for Liquids and Gases Introduction Bronkhorst Cori-Tech B.V. manufactures precise, compact Mass Flow Meters and Controllers for gases and liquids,
Catalog. Aera. FC-PIR98x. Series Pressure- Insensitive MFCs. Next-generation PI technology for tomorrow s manufacturing demands
Catalog Aera FC-PIR98x Series Pressure- Insensitive MFCs Next-generation PI technology for tomorrow s manufacturing demands Benefits Improved gas delivery performance and production yields Easy integration
CORI-FLOW PRECISION MASS FLOW METER / CONTROLLER FOR LIQUIDS AND GASES
SENSORS FOR MASS FLOW AND PRESSURE CORI-FLOW PRECISION MASS FLOW METER / CONTROLLER FOR LIQUIDS AND GASES INTRODUCTION Bronkhorst High-Tech BV is the worldwide pioneer in the field of low flow liquid metering
Mass Flow Meter (MFM) for Gases
873 Mass Flow Meter (MFM) for Gases Direct flow measurement by MEMS- Technology for nominal flow rates from 1 ml N /min to 8 l N /min (N 2 ) High accuracy Short response time Compact design and digital
Mass Flow Controller (MFC) for Gases
Mass Flow Controller (MFC) for Gases Direct flow measurement with CMOSens technology for nominal flow rates from 0 ml N to 0 l N High accuracy and reproducibility Ingress protection IP Type can be combined
Technical Data Sheet High Performance Digital Gas Mass Flow Meters and Controllers Features Description
Smart-Trak Model 100 High Performance Digital Gas Mass Flow Meters and Controllers Features Measure & control gas mass flow rates up to 1000 slpm True digital performance provides high accuracy and great
Design Features. General Description
Model thermal Mass Flow Controllers are designed to indicate and control set flow rates of gases. The combines the characteristics and accuracy of conventional mass flow devices into a unique compact design
Bypass Mass Flow Controller (MFC) for gases
Bypass Mass Flow Controller (MFC) for gases Bypass MFC with Capillary technology for nominal flow rates from ml N /min to l N /min Suitable for aggressive gases Fieldbus option Type 870 can be combined
Mass Flow Controller (MFC) for Gases
Mass Flow Controller (MFC) for Gases Type 8713 can be combined with... Direct flow measurement by MEMS- Technology for nominal flow rates from 1 ml N /min to 8 l N /min (N 2 ) High accuracy and repeatability
Brooks TMF-Zone 1 Models 5816-Ex/5864-Ex
Data Sheet DS-TMF-586Ex-MFC-eng TMF-Zone Brooks TMF-Zone Models 586-Ex/5864-Ex Customer Benefits Assured process accuracy and repeatability Long-term reliability Reduced maintenance CE certified Improved
Mass Flow Controller (MFC) for Gases
Mass Flow Controller (MFC) for Gases Type can be combined with... Direct flow measurement with CMOSens - Technology for nominal flow rates from 20 ml N /min to 80 l N /min (N 2 ) High accuracy and reproducibility
The M-Series Eletta Flow Meter High accuracy DP Flow Meter with multiple functions
The M-Series Eletta Flow Meter High accuracy DP Flow Meter with multiple functions Flow Meter with multiple functions for gases and liquids M3 The M-series Flow Meter, with its versatile and user-friendly
Mass Flow Meter (MFM) for gases
Mass Flow Meter (MFM) for gases Type can be combined with Inline MFM for nominal flow rates from 25 l N /min to 1,500 l N /min; 1/4 to 3/4 High accuracy Fast settling time Fieldbus option Special version
Mass Flow Controller (MFC) for Gases
Mass Flow Controller (MFC) for Gases Type 8626 can be combined with Inline MFC for full scale rates from 25 l N /min to 1.500 l N /min; 1/4 to 3/4 High accuracy Short settling time Fieldbus option Type
X-Flow Mass Flow Controller 授权代理 : 北京品超思瑞科技学院公司
X-Flow Mass Flow Controller 2 Highlights Parker Hannifin Precision Fluidics Division is excited to introduce X-Flow, a new easy to use general purpose mass flow controller for your instrument, lab, or
GAS Piezo Actuator Type Mass Flow Controllers
11 GAS Piezo Actuator Type Mass Flow Controllers Purifying the process gas is an extremely important part of forming the thin films that are required in today s semiconductor manufacturing. Improving the
GFM. Typical Aluminum GFM Mass Flow Meter NIST MASS FLOW METERS. Principles of Operation. Design Features
Design Features Rigid metallic construction. Maximum pressure of 1000 psig (70 bars). Leak integrity 1 x 10-7 of helium. NIST traceable certification. Built-in tiltable LCD readout. 0-5 Vdc and 4-20 ma
MCQ Gas Blender 100 Series 3 Channels Gas Mixer
Channels Gas Mixer Revision 1.8 October 2016 High Performance Digital Gas flow Gas Dilutor Blender & Gas for Mixing flow Mixing Gases System and Calibration Routines Technical Data Sheet Lab in a box From
MACH ONE MASS FLOW CONTROLLER. MACH ONE SERIES flow control. MASS FLOW CONTROLLERS at the speed of sound.
MACH ONE MASS FLOW CONTROLLER MACH ONE SERIES flow control MASS FLOW CONTROLLERS at the speed of sound. MACH ONE SERIES MASS FLOW CONTROLLER FLOW CONTROL AT THE SPEED OF SOUND The Mach One revolutionary
MASS FLOW SYSTEMS MASS FLOW MEASURING, CONTROLLING AND BLENDING SYSTEMS
MASS FLOW SYSTEMS MASS FLOW MEASURING, CONTROLLING AND BLENDING SYSTEMS Using state-of-the-art measuring and microprocessor technologies, Advanced has assembled a series of systems which can measure mass
ABB MEASUREMENT & ANALYTICS DATA SHEET. WaterMaster FEW530 Electromagnetic water meter
ABB MEASUREMENT & ANALYTICS DATA SHEET WaterMaster FEW530 Electromagnetic water meter 2 WATE RMASTE R F E W 530 ELECT ROMAGNE TIC WATE R ME TE R DS/FE W530/FE T3 -E N RE V. A Measurement made easy Cost
IN-FLOW CTA Industrial Mass Flow Meters and Controllers for Gases
IN-FLOW CTA Industrial Mass Flow Meters and Controllers for Gases > Introduction Bronkhorst High-Tech B.V., the European market leader in thermal Mass Flow Meters/Controllers and Electronic Pressure Controllers,
TELEDYNE HASTINGS INSTRUMENTS PRELIMINARY BULLETIN. Models HFM-D-301 & 305, HFC-D-303 & 307
TELEDYNE HASTINGS DIGITAL 300 MEDIUM/HIGH CAPACITY FLOWMETERS AND CONTROLLERS INSTRUMENTS Models HFM-D-301 & 305, HFC-D-303 & 307 FEATURES Flows to 2500 slm (N 2 Equivalent) Accuracy in Nitrogen ±(0.2%
Quick Installation Guide Doc nr.: C Date:
Quick Installation Guide Doc nr.: 9.17.093C Date: 13-05-2016 SCOPE OF THIS GUIDE mini CORI-FLOW instruments are highly accurate instruments for measuring and controlling the mass flow rate of liquids and/or
Digital Mass Flow Meters and Controllers for Gases
Digital Mass Flow Meters and Controllers for Gases A Bronkhorst company. M+W Instruments. Your specialists for inline measurement WORTH KNOWING M+W Instruments was founded in 1988 and has always specialised
Products Guidance. Combined catalog GAS LIQUID VACUUM ANALYSIS. Vacuum Measurement. Technology. Flow Control Technology. Liquid Source Vaporization
Products Guidance Combined catalog GAS LIQUID VACUUM ANALYSIS Vacuum Measurement Technology Flow Control Technology Liquid Source Vaporization Technology With the spirit of inquiry for the future, HORIBA
TH-1800-T TRX-700-CNG Converter
TH-1800-T TRX-700-CNG Converter low detector The CNG fuel gas flowmeter is so accurate as to meet a demand of measuring the CNG directly by making the most use of our well-established mini-thermal flowmeter
780S Ultra High Purity Series
Smart Ultra High Purity Thermal Gas Mass Flow Meter Features Measures mass flow directly, no seperate temperature or pressure inputs required Field adjustment of critical flow meter settings via on-board
Model PDT Dewpoint Transmitter
Model PDT Dewpoint Transmitter Instruction Manual Alpha Moisture Systems Alpha House 96 City Road Bradford BD8 8ES England Tel: +44 1274 733100 Fax: +44 1274 733200 email: mail@amsytems.co.uk web: www.amsystems.co.uk
Mass Flow Controller (MFC) for gases. Inline MFC for nominal flow rates from 25 I N. /min to I N
Mass Flow Controller (MFC) for gases Type 8626 can be combined with Inline MFC for nominal flow rates from 25 I N /min to I N /min; 1/4 to 3/4 High accuracy Fast settling time Fieldbus option Special version
Porter Analytical & Industrial Products
Porter Analytical & Industrial Products Porter Analytical & Industrial Products Engineered to Excel in Critical Applications The Porter Instrument Division of Parker Hannifin Corporation is a leading manufacturer
Max-Trak Model 180. Technical Data Sheet. NEMA 6 / IP67 Compliant Industrial Mass Flow Meters and Controllers For Gases
NEMA 6 / IP67 Compliant Industrial Mass Flow Meters and Controllers For Gases Features Industry s only NEMA 6/IP67 industrial MFC affords wash down protection eliminating the need for secondary enclosures
better measurement Simply a question of SCHMIDT Flow Sensor SS The cost-effective alternative in pressurised systems up to 10 bars.
Simply a question of better measurement SCHMIDT Flow Sensor SS 20.261 The cost-effective alternative in pressurised systems up to 10 bars. Compressed air technology Industrial processes A cost analysis
Flow Meters and Flow Controllers
Flow Meters and Flow Controllers HFM-205 Flow Meter HFC-207 Flow Controller HIGH CAPACITY FLOW METERS AND FLOW CONTROLLERS FEATURES ± 1% full scale accuracy 1 Input Power: +/- 15 VDC or +24 VDC (specify
Precision pressure sensor Basic version Model CPT6020
Calibration Precision pressure sensor Basic version Model CPT6020 WIKA data sheet CT 25.13 Applications Calibration technology High-accuracy pressure monitoring Pressure sensing in critical applications
Operating Instructions for Direct Flow Mass Flow Meter for gases. Model: DMW
Operating Instructions for Direct Flow Mass Flow Meter for gases Model: DMW 1. Contents 1. Contents... 2 2. Note... 3 3. Instrument Inspection... 3 4. Regulation Use... 3 5. Operating Principle... 4 5.1.
GP1 & GP2. Electropneumatic Regulators FOR PRESSURE CONTROL TO 1,000 PSI
GP1 & GP2 Electropneumatic Regulators FOR PRESSURE CONTROL TO 1, PSI GP1 & GP2 Functional Description The GP series control valve is an electronic pressure regulator designed to precisely control the pressure
TC Series FOR THE MASS FLOW CONTROL OF ALL KIND OF GASES THERMAL MASS FLOW CONTROLLER OUTLINE FEATURES OPERATION PRINCIPLE
FOR THE MASS FLOW CONTROL OF ALL KIND OF GASES TC Series THERMAL MASS FLOW CONTROLLER OUTLINE TC series are thermal mass flow controllers, a combination of thermal mass flowmeter and control valve. TC
SCOPE OF THIS GUIDE STARTING-UP. 1 Check mini CORI-FLOW functional properties
Quick Installation Guide Doc nr.: 9.17.052H Date: 10-12-2015 SCOPE OF THIS GUIDE mini CORI-FLOW instruments are highly accurate instruments for measuring and controlling the mass flow rate of liquids and/or
SmartTrak 100HP. Ultra-High Pressure Digital Gas Mass Flow Meters & Controllers. FEATURES DESCRIPTION
Ultra-High Pressure Digital Gas Mass Flow Meters & Controllers FEATURES n Ideal for pilot plants, hydrogenation reactors, and autoclave processes n Measure and control gas mass flow rates over an inlet
Liquids and Gases Gas & Liquid
mini CORI-FLOWTM Compact Coriolis Mass Flow Meters & Controllers for Liquids and Gases Gas & Liquid Contents Facts about Coriolis Flow Measurement and Control 3 Mass Flow Meters 4 Mass Flow Controllers
Porter Lab & Analytical Products
Porter Lab & Analytical Products Porter Lab & Analytical Products Engineered to Excel in Critical Applications The Porter Instrument Division of Parker Hannifin Corporation is a leading manufacturer of
Model FS5001B VA.1. MEMS Mass Flow Sensors ISO 9001 ISO OHSAS 18001
Model FS5001B MEMS Mass Flow Sensors VA.1 ISO 9001 ISO 14001 OHSAS 18001 Model FS5001B Features Low mass flow range from 0 ~ 00 sccm up to 0 ~ 1000 sccm Outstanding accuracy of ±.0 % Response time < 10
MASFLO-OVAL Ⅱ THERMAL MASS FLOWMETER/CONTROL VALVE for GAS MEASUREMENT MODEL: FHC, FHD series
Gas EXPLOSIONPROOF MASFLO-OVAL Ⅱ THERMAL MASS FLOWMETER/CONTROL VALVE for GAS MEASUREMENT MODEL: FHC, FHD series GENERAL SPECIFICATION GS.No.GBF112E 1 GENERAL The explosionproof MASFLO-OVAL Ⅱ FHC series
The intelligent alternative for VA meters: mass flow meters for gases with flow display
The intelligent alternative for VA meters: mass flow meters for gases with flow display > Introduction Bronkhorst, specialists in low flow measurement and control, have designed an innovative series of
Visualize Nitrogen Gas Consumption
Air Flow Monitor EWA2 SERIES Conforming to EMC Directive (all models) & Pressure Equipment Directive (AEWA2150/2200 only) Visualize Nitrogen Gas Consumption Small pipe size as Well as Air Consumption!
BUBBLER CONTROL SYSTEM
BUBBLER CONTROL SYSTEM Description: The HDBCS is a fully automatic bubbler system, which does liquid level measurements in water and wastewater applications. It is a dual air compressor system with, air
SELECTION GUIDE SELECTION GUIDE. Pressure, Flow, Level & Temperature Products for Ultra-Clean Processing P R E C I S I O N S E N S O R S
SELECTION GUIDE SELECTION GUIDE Pressure, Flow, Level & Temperature Products for Ultra-Clean Processing P R E C I S I O N S E N S O R S S t a i n l e s s S t e e l P r e s s u r e S w i t c h e s f o r
Digital electro-pneumatic regulators Series ER100
CATALOGUE > Release 8.2 Digital electro-pneumatic regulators Series ER100 TREATMENT > Digital electro-pneumatic regulators Series ER100 Port G1/4» Compact design» Digital display» Analog and digital input»
Miniature Electronic Pressure Controllers. Precision Fluidics
Miniature Electronic Pressure Controllers Precision Fluidics 2 When you partner with the global leader in motion and control technologies, expect to move your business and the world forward. From miniature
Pro-V Multivariable Flowmeter Model M22 In-line Vortex
Pro-V Multivariable Flowmeter Model M22 In-line Vortex Pro-V TM Advantage: Volumetric or mass flow monitoring of most liquids, gases, and steam Multivariable meter delivers mass flow, temperature, pressure,
Autocalibration Systems For In Situ Oxygen Analyzers
Product Data Sheet PDS 106-340AC SPS 4000, IMPS 4000, and MPS 3000 January, 1999 Autocalibration Systems For In Situ Oxygen Analyzers Cost-effective autocalibration systems for installations ranging from
SmartTrak. High Performance Digital Gas Mass Flow Meters & Controllers. DESCRIPTION
High Performance Digital Gas Mass Flow Meters & Controllers n Measure and control gas mass flow rates up to 1000 slpm n Pressure up to 5000 psig (333 barg) nideal for OEM, industry or research applications
TC Series FOR THE MASS FLOW CONTROL OF ALL KIND OF GASES THERMAL MASS FLOW CONTROLLER GENERAL FEATURES OPERATION PRINCIPLE
FOR THE MASS FLOW CONTROL OF ALL KIND OF GASES TC Series THERMAL MASS FLOW CONTROLLER GENERAL TC series are thermal mass flow controllers, a combination of thermal mass flowmeter and control valve. TC
TEK-SUB 4800B. Submersible Level Transmitter. Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys LEVEL
Technology Solutions TEK-SUB 4800B Submersible Level Transmitter LEVEL Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys Introduction The Tek-Sub 4800B Submersible Level Transmitter
The Ins and Outs of I/P Transducers
The Ins and Outs of I/P Transducers By Mark B. Levine, ControlAir Inc. General description I/P transducers are versatile instruments that use an electrical control signal to proportionally regulate gas
Torque Tube TB300 Digital Transmitters
Page 1 of 7 7E.300-E Issue 4-2009 Description Series TB300 torque tube liquid level instruments utilize the buoyancy exerted on a displacer when immersed in a liquid. The buoyancy on the displacer is proportional
C-Flow Coriolis Mass Flow Meters
Coriolis Mass Flow Meters Ready for Take Off The New Compact C-Flow Küppers Elektromechanik GmbH The C-Flow The C-Flow Coriolis Mass Meters consist of two components: KCE Transmitter KCM Transducer 2 KEM
COMPAFLOW. Compressed Air. Volumetric flow. Gas. Mass flow. Steam. Net volumetric flow. Liquid
Volumetric flow Compressed Air Mass flow Gas Net volumetric flow Steam Liquid Universal compact orifice flow meter combines a compact orifice flow sensor and sotiphicated converter One-piece flow sensor,
Battery Powered Thermal Mass Flow Meters for Gases
red-y compact series product information attery Powered hermal Mass Flow Meters for Gases icenta Controls Ltd, Unit 3 he Woodford Centre, Lysander Way, Old arum Park, alisbury, P4 6U, U Digital advantage:
FAS-W. Features. Applications. Automatic condensation hygrometer
FAS-W HUMIDITY ANALYZER Automatic condensation hygrometer the «FAS-W» Moisture Analyzer automatic condensation hygrometer can measure both the volume fraction of moisture and the dew point temperature
UNDERSTANDING, ACCELERATED
UNDERSTANDING, ACCELERATED MEASURE FLOW, PRESSURE, AND TEMPERATURE ALL IN ONE INSTRUMENT! Designed for Performance TSI thermal mass flowmeters incorporate a proprietary platinum film sensor design for
INSTRUCTION MANUAL. FLOW CONTROL DRAWERS MANUAL / PLC CONTROL SERIES Model Version Perma Pure LLC Tel:
PERMA PURE INSTRUCTION MANUAL FLOW CONTROL DRAWERS MANUAL / PLC CONTROL SERIES Model 3300 Version 4.06 Perma Pure LLC Tel: 732-244-0010 P.O. Box 2105, 8 Executive Drive Tel: 800-337-3762 (toll free US)
2/ Port G1/4
CATALOGUE > Release 8.8 > Series ER100 digital electro-pneumatic regulators Series ER100 digital electro-pneumatic regulators Port G1/4 Compact design Digital display Analog and digital input Programmable
MASS-STREAM TM Instruction Manual. D-6200 Analog Mass Flow Meters / Controllers
MASS-STREAM TM Instruction Manual D-6200 Analog Mass Flow Meters / Controllers Doc. No.: 9.17.112A Date: 17-03-2017 ATTENTION Before installing and operating the instrument it is strongly recommended that
For Multi-Parameter Meters see mvx
Design Features VORTEX IN-LINE FLOW METERS For Multi-Parameter Meters see m Principles of Operation n No moving parts to wear or fail. n Electronics can be remotely mounted up to 30.5 m (0 ft). n No fluid
SLA5810/20/40 SLAMf10/20 Series
Model SLA5810/20/40 Model SLAMf10/20 Overview Data Sheet SLA5810/20/40 SLAMf10/20 Series Pressure Controller (Thermal Mass Flow) Elastomer Sealed, Digital, Upstream, Downstream, and Remote Transducer Pressure
High Performance Digital Gas Mass Flow Meters & Controllers
High Performance Digital Gas Mass Flow Meters & Controllers FEATURES n Measure and control gas mass flow rates up to 1000 slpm n Pressure up to 500 psig (34.5 barg). For pressures greater than 500 psig
Mass Flow Controller (MFC)/ Mass Flow Meter (MFM) for gases
Mass Flow Controller (MFC)/ Mass Flow Meter (MFM) for gases Nominal flow ranges from l N /min up to l N /min High accuracy and repeatability Communication via standard signals or Industrial Ethernet Electromagnetic
For Multi-Parameter Meters see mvx
VORTEX IN-LINE FLOW METERS Design Features For Multi-Parameter Meters see mvx Principles of Operation VX No moving parts to wear or fail. Electronics can be remotely mounted up to 30.5 m (0 ft). No fluid
GasSense NDIR User Manual
INDEX INDEX... 1 1. OVERVIEW... 2 2. TECHNICAL DATA... 3 3. SPECIFICATIONS... 4 4. PRODUCT DESCRIPTION... 5 4.1 Mechanical details... 5 4.2 Piping... 7 4.3 Connections... 7 5. INSTALLATION... 10 6. CALIBRATION
Variable Area Flow Meters
PDF Published May, 04 Variable Area Flow Meters Chemline F Series Variable Area Flow Meters are ideal for plastic piping. They provide a combination of accurate visual flow rate measurement and clear flow
ALL-IN-ONE MINI THERMAL MASS FLOWMETER
INDICATION, TOTAIZATION, -POINT AARM, DC to ma AND PUSE OUTPUT BY ONE UNIT TF-T Series A-IN-ONE MINI TERMA MASS FOWMETER OUTINE TF-T MINI TERMA MASS FOWMETER is for the measurement of mass flow rate of
![[Instruments for vacuum measurement, checking and adjustment] 3](/thumbs/94/121874202.jpg "[Instruments for vacuum measurement, checking and adjustment] 3")
Introducing the remarkable, a break-through in mass flow control technology
The mass flow controller, is a key piece of semiconductor manufacturing equipment. Its quality and efficiency play a major role in the success or failure of the semiconductor manufacturing process. HORIBA
Gas density monitor With integrated transmitter Model GDM-100-TI
SF 6 gas solutions Gas density monitor With integrated transmitter Model GDM-100-TI grid Products WIKA data sheet SP 60.05 for further approvals see page 5 Applications Gas density monitoring of closed
P499 Heavy Duty Pressure Transducer
P499 Heavy Duty Pressure Transducer Product Bulletin Code No. LIT-??? E Issued 11 2006 The P499 Series is a new global Pressure Transducer with an excellent price performance ratio. The P499 exceeds the
Programmable pressure and temperature transmitters PTM/RS485
Programmable pressure and temperature transmitters PTM/RS485 Version: 03-28-2012 Technical Specifications Pressure measuring range (bar) 0.1... 0.5 > 0.5 2 > 2 25 Overpressure 3 bar 3 x FS ( 3 bar) 3 x
RCD - Ultra-Rugged Differential Pressure Flowmeter
0.15-1 to 85-600 GPM Liquids 2.5-25 to 300-1700 SCFM Gases 1/2 to 3 Line Sizes Bronze or 316-Ti Stainless Steel Mechanical Indicator, Digital Indicator, Transmitters and Switches Available Custom Calibrations
Features. Description
Features Fast response flow meter ideal for inert gas and liquid mass flow measurement applications Smart electronics permit field adjustment of critical flow meter settings Field validation of flow meter
BUBBLER CONTROL SYSTEM
BUBBLER CONTROL SYSTEM Description: The LDBCS is a fully automatic bubbler system, which does liquid level measurements in water and wastewater applications. It is a dual air compressor system with, air
E8AA. Pressure Sensor of Stainless Steel Construction Is Ideal for a Wide Range of Applications. Pressure Sensor (Stainless Steel Diaphragm)
Pressure Sensor (Stainless Steel Diaphragm) CSM DS_E_3_1 Pressure Sensor of Stainless Steel Construction Is Ideal for a Wide Range of Applications Incorporates double diaphragms consisting of SUS316L stainless
75 Allen Street Lexington, MA Minute Model & Pricing Overview Guide
75 Allen Street Lexington, MA 02421 781-862-9572 5 Minute Model & Pricing Overview Guide MASS FLOW SENSORS 4 models PMF1000 Series unamplified output, 10 sccm to 3,000 sccm PMF2000 Series linearized, compensated
Pegas 4000 MF Gas Mixer InstructionManual Columbus Instruments
Pegas 4000 MF Gas Mixer InstructionManual Contents I Table of Contents Foreword Part I Introduction 1 2 1 System overview... 2 2 Specifications... 3 Part II Installation 4 1 Rear panel connections...