1 Emergency Planning, Preparedness, and Response A COORDINATED APPROACH TO THE EMERGENCY PLANNING & RESPONSE REQUIREMENTS OF EPA, OSHA & DOT REGULATIONS
2 About KY Chapter of A&WMA The Kentucky Chapter of the Air & Waste Management Association is a non-profit, non-partisan professional organization that provides training, information, and networking opportunities to environmental professionals throughout Kentucky and Kentuckiana. Our mission is to strengthen the environmental profession, expand scientific and technological responses to environmental concerns, and assist professionals in critical environmental decision-making to benefit human health and the environment. Learn more about the Kentucky Chapter at The Kentucky Chapter is affiliated with the International Air & Waste Management Association (www.awma.org) and is part of its East Central Section (http://www.ecs-awma.org). A&WMA IS GLAD YOU JOINED US FOR THIS ENVIRONMENTAL PRACTITIONERS WORKSHOP! We hope you got a lot out of it!
3 About the Presenter Corinne M. Greenberg, CHMM Environmental Manager, Carbide Industries LLC Manufacturer of calcium carbide, acetylene, and calcium hydroxide Louisville, Kentucky & Calvert City, Kentucky Ms. Greenberg has over 24 years experience in environmental health & safety management across a broad spectrum of industrial sectors, including waste management, recycling, the manufacture of durable consumer goods, DoD s military-industrial complex, and the chemical industry. She has been credentialed as a Certified Hazardous Materials Manger (CHMM) since Ms. Greenberg is active at the national and local levels of the Air & Waste Management Association (A&WMA, currently KY-AWMA Chair ) and also the Alliance of Hazardous Materials Professionals (AHMP, locally KCHMM). She represents Carbide Industries in the Compressed Gas Association (CGA), represents CI s Louisville facility in its Local Emergency Planning Commission (LEPC), its metro chamber of commerce, and the Rubbertown Community Advisory Council, and she represents CI s Calvert City facility in the Calvert Industrial Mutual Aid Program and the Calvert City Environmental Consortium.
4 Planning & Preparedness vs. Response?! The Environmental Protection Agency (EPA), the Occupational Safety & Health Administration (OSHA), and the Department of Transportation (DOT) each have program-specific requirements that dictate specific emergency planning, preparedness, and/or response elements that must be incorporated into a facility s emergency procedures, depending on the nature of the facility and the hazmats present. For the purposes of this presentation, we will review the PLANNING AND PREPAREDNESS requirements first, then we will discuss the EMERGENCY RESPONSE requirements
5 Planning & Preparedness: EPA SPCC 40 CFR EPA, under the authority of the Oil Pollution Prevention Act of 1990 (OPPA), has requirements for Spill Prevention, Control, and Countermeasures (SPCC). These requirements are generally applicable to industrial or commercial facilities with onsite above-ground storage of oil totaling >1320 gallons, or >42,000 gallons underground storage capacity. EPA standards at 40 CFR require an SPCC plan including: A discussion of your facility s OPPA conformance; Compliance with applicable requirements of 40 CFR 112; Diagram of the facility, noting location and contents of each oil storage area; Spill reporting procedures; and Emergency response procedures. SPCC plans must be certified by a Professional Engineer (PE). Appropriate facility inspections and tests shall be performed and records maintained.
6 Planning & Preparedness: EPA RCRA 40 CFR 264 Subpart D EPA has also promulgated regulations to manage hazardous waste in accordance with the Resource Conservation & Recovery Act of 1976 (RCRA). EPA standards at 40 CFR 264 Subpart D (paragraphs ) stipulate RCRA s Contingency Plan and emergency procedure requirements for Large Quantity Generators (LQGs) of hazardous waste, as incorporated by reference at 40 CFR 262 Subpart C. Specific Contingency Plan requirements include: Designation of an onsite Emergency Coordinator and alternates, and listing of their names, addresses, and phone numbers; Emergency equipment onsite and procedures; A site evacuation plan; and Arrangements with local emergency responders.
7 Planning & Preparedness: EPA RCRA 40 CFR 264 Subpart C EPA standards at 40 CFR 264 Subpart C (paragraphs ) stipulate RCRA s Preparedness & Prevention requirements for hazardous waste treatment, storage or disposal facilities (TSDFs). These standards specify: Design & operation of each TSDF to minimize the possibility of fire, explosion, or release to the environment; Required equipment including communications devices, fire extinguishers, and water supply; Equipment testing & access to communications systems; and Required aisle space; and Arrangements with local authorities.
8 Planning & Preparedness: EPA CERCLA 40 CFR EPA requires notification of Reportable Quantity (RQ) releases of listed hazardous substances under the authority of the 1980 Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). EPA standards at 40 CFR designate hazardous substances which are subject to CERCLA notification requirements, and establishes the RQ for each. A facility s emergency plan should list the RQ for each listed hazardous substance present onsite so that, in the event of an emergency, this need-to-know info is already readily available.
9 Planning & Preparedness: EPA The List of Lists One can go directly to Table in the CERCLA regulations to see the List of Hazardous Substances and Reportable Quantities, but note that this list only includes the CERCLA hazardous substances There s another widely used EPA reference called The List of Lists that shows not only the CERCLA substances and their RQs but also the reportable quantities and threshold quantities for other regulatory programs, including EPCRA* and RMP* (*wait for it!) Source: https://www.epa.gov/epcra/consolidated-list-lists
10 Planning & Preparedness: EPA SARA Title III 40 CFR Title III of the Superfund Amendments & Reauthorization Act (SARA) tasked EPA with establishing a system to allow for coordinated emergency planning and release notifications. Collectively, the Emergency Planning and Community Right-to-Know Act (EPCRA), specific requirements are found under 40 CFR Subchapter J, parts : 40 CFR 350 does allow for some Trade Secrecy protections 40 CFR 355 Emergency Planning and Notification requires: Emergency Planning submittal of MSDSs and EHS Plans (KY: Tab Q-7 ) to LEPCs for facilities with Extremely Hazardous Substances (EHS) present above listed Threshold Planning Quantities (TPQs). Part 355 obligates affected facilities to participate in their Local Emergency Planning Committee (LEPC) Emergency Release Notification for EHS releases > specified EPCRA RQs notification shall be made to Local Emergency Planning Committees (LEPCs) and State Emergency Response Commissions (SERCs), in addition to reporting of CERCLA RQ releases to National Response Center 40 CFR 370, the first component of Community Right-to-Know, outlines the Tier I and Tier II hazardous chemical inventory reporting requirements, due to a facility s LEPC, SERC, and local fire department by March 1 of each year. 40 CFR 372, the second component of Community Right-to-Know, provides reporting requirements for the Toxic Release Inventory (TRI) program, due to EPA by July 1 of each year.
11 Planning & Preparedness: EPA RMP 40 CFR 68 Subpart G Section 112(r) of the Clean Air Act gives EPA the authority to require that facilities with a regulated substance in a quantity greater than its listed Threshold Quantity (TQ) shall prepare a Risk Management Plan (RMP). 40 CFR 68 Subpart F lists 77 toxic substances and 63 flammable substances subject to RMP accident prevention regulations. Flammable substances are subject to RMP if the total quantity contained in a single process exceeds 10,000 lbs. (Fuels held for sale at a retail facility are excluded from RMP.) The TQ for each toxic substance is set in consideration of its relative toxicity. TQs for toxic substances range from 500 lbs to 20,000 lbs. EPA standards at 40 CFR 68 Subpart G require an RMP plan including: An executive summary; A release Prevention Program; RMP registration; An Emergency Response program; and An offsite consequence analysis; Operator certification of the RMP. A five-year accident history;. RMPs must be made available to the public.
12 Planning & Preparedness: OSHA PSM 29 CFR Similar to EPA s RMP program, OSHA Process Safety Management (PSM) regulations require facilities that process listed toxic, reactive or highly hazardous chemicals to develop and implement a PSM program in accordance with the regulatory requirements of 29 CFR Appendix A to 29 CFR lists 137 chemicals which are subject to PSM when present above a Threshold Quantity (TQ). The TQ for each chemical is set in consideration of its relative toxicity. TQs for toxic substances range from 100 lbs (e.g., sarin) to 15,000 lbs (e.g., ammonia solutions). There are 14 required PSM elements: Process Safety Information Process Hazard Analysis Operating Procedures Training Contractor provisions Mechanical Integrity Hot Work Management of Change Incident Investigation Compliance Audits Trade Secrets Employee Participation Pre-startup Safety Review Emergency Planning & Response see 29 CFR (n)
13 Planning & Preparedness: OSHA EAP 29 CFR OSHA has specific Emergency Action Plan requirements at 29 CFR that are applicable whenever any other OSHA standard requires an EAP. An Emergency Action Plan must be in writing, must be kept in in the workplace, and must be made available to employees for review. (Exception: employers with 10 employees may communicate the plan orally.) An OSHA-compliant EAP will include: Procedures for reporting a fire or other emergency; Procedures for emergency evacuation; Procedures to be followed by employees who remain to operate critical plant operations before they evacuate; Procedures to account for all employees after evacuation; Procedures to be followed by employees performing rescue or medical duties; The name or job title of every employee who may be contacted by employees who need more information about the plan or an explanation of their duties under the plan. An Employee Alarm System shall be installed and maintained. Evacuation assistants must be trained in their roles. The EAP must be reviewed with each affected employee when the EAP is developed and/or when employees are assigned to a job and/or when their responsibilities under the plan change.
14 Planning & Preparedness: OSHA FPP 29 CFR OSHA has specific Fire Prevention Plan requirements spelled out at 29 CFR that are applicable whenever any other OSHA standard requires an FPP. An Fire Prevention Plan must be in writing, must be kept in in the workplace, and must be made available to employees for review. (Exception: employers with 10 employees may communicate the plan orally.) An OSHA-compliant FPP will include: A list of all major fire hazards (including proper handling & storage procedures for hazmat, potential ignition sources, and fire protection equipment necessary to control each hazard) Procedures to control accumulations of flammable and combustible waste materials; Procedures for regular maintenance of safeguards installed on heat-producing equipment; Identification of employees responsible for maintaining equipment to prevent or control sources of ignition or fires; and Identification of employees responsible for the control of fuel source hazards.
15 Planning & Preparedness: OSHA Fire Protection 29 CFR 1910 Subpart L Eleven (11!) discrete OSHA standards 29 CFR comprise Subpart L, collectively referred to as OSHA s Fire Protection requirements is the Fire Brigade standard. This standard contains definitions applicable elsewhere in Subpart L, but the key definition to note is the definition for Fire Brigade : Fire brigade (private or industrial fire department) means an organized group of employees who are knowledgeable, trained, and skilled in at least basic fire fighting operations has specific requirements for Portable Fire Extinguishers has specific requirements for Standpipe and Hose Systems has specific requirements for Automated Sprinkler Systems apply to different types of Fixed Extinguishing Systems (general, dry chemical, gaseous agent, water spray & foam) specifies requirements for Fire Detection Systems specifies requirements for Employee Alarm Systems Subpart L has five mandatory appendices A-E. Of these, note this from Appendix A: This section does not require an employer to organize a fire brigade. However, if an employer does decide to organize a fire brigade, the requirements of this section apply
16 Planning & Preparedness : OSHA Medical & First Aid 29 CFR In anticipation of emergency response, including the possible need to render assistance and care to injured individuals, be aware of requirements of OSHA s Medical and First Aid standard at 29 CFR : In the absence of an infirmary, clinic, or hospital in near proximity to the workplace, a person or persons shall be adequately trained to render first aid. Adequate first aid supplies shall be readily available. Where the eyes or body of any person may be expose to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body shall be provided within the work area for immediate use. Appendix A to provides non-mandatory guidance for the preparation of First Aid Kits. Additionally, OSHA s Bloodborne Pathogens standard at 29 CFR (d)(3) requires appropriate PPE to protect potentially exposed employees (including emergency responders and evacuation assistants).
17 Planning & Preparedness: DOT Security Plans 49 CFR 172 Subpart I The Department of Transportation (DOT) Pipeline & Hazardous Materials Safety Administration (PHMSA) has jurisdiction over all hazardous materials in transport ( hazmats ). This jurisdictional authority extends from loading dock to receiving dock, inclusive of all points inbetween (whether by road, rail, air, or vessel). 49 CFR 172 Subpart I (parts ) requires the development and implementation of a security plan for shippers of certain hazardous materials, including: Explosives Bulk quantities of flammable gas Bulk oxidizer gases Materials poisonous by inhalation Bulk quantities of flammable liquids Desensitized explosives Spontaneously combustible solids Dangerous when Wet hazmats Bulk quantities of oxidizers Organic Peroxides Select agents or toxins per CDC Uranium hexafluoride IAEA Category 1 & 2 radionuclides Radionuclides listed as RAM-QC by NRC Bulk PG I corrosives Components of a shipper s DOT Security Plan include: Assessment of transportation security risks, including site-specific and location-specific risks associated with facilities at which the hazmat is prepared, stored, or unloaded; Personnel security; Provisions against unauthorized access; En route security; with Additional planning requirements for transportation by rail.
18 Planning & Preparedness: Other Planning Considerations??? State and Local authorities will frequently also have jurisdictional requirements that should also be incorporated into a facility s Emergency Preparedness Plan. Such requirements may include the need to address:?! Provisions to self-report excess air emissions (including those associated with equipment startup, shutdown, or malfunction excess opacity odors etc ) Slug Control (i.e., unpermitted discharges to a wastewater POTW) NPDES Permit Best Management Practices, Stormwater Pollution Prevention Plans, Groundwater Protection Plans State and Local Hazmat Ordinances etc. (!) EPA recommends development of a single, coordinated plan based on the National Response Team s Integrated Contingency Plan Guidance ( One Plan ). Guidance can be found in the June 5, 1996, Federal Register at 61 FR 28642: https://www.gpo.gov/fdsys/pkg/fr /pdf/ pdf
19 Response Now What?! Even with the best of plans, accidents do happen. In the event of an actual emergency fire, spill, release one would hope that a facility s preparedness would lead to effective, safe, complete, and timely response. Over the next few slides, we will focus on some additional regulatory elements and reference resources that are directly applicable to the act of discovery and response to emergencies. This section will include discussion of regulatory requirements established with the specific intent of protection of human health and the environment
20 Response: EPA CERCLA 40 CFR CERCLA Release Notification Requirements per 40 CFR 302.6(a): Any person in charge of a vessel or an offshore or onshore facility shall, as soon as he or she has knowledge of any release (other than a federally permitted release or application of a pesticide) of a hazardous substance from such vessel or facility in a quantity equal to or exceeding the reportable quantity determined by this part in any 24-hour period, immediately notify the National Response Center ( ) NOTE: Although the regulatory imperative states only immediately notify and does not state a specific time frame, EPA policy has evolved to imply an expectation of notification within the first 15 minutes of discovery!
21 Response: EPA EPCRA 40 CFR 355 EPCRA has additional release notification requirements per 40 CFR 355: : Release a reportable quantity (RQ) of any EHS or of a hazardous substance as defined by CERCLA : You do not have to provide emergency release notification under this subpart for any release that results in exposure to persons solely within the boundaries of your facility : The release of an RQ of an EHS or CERCLA hazardous substance within any 24-hour period triggers the emergency release notification requirements. RQs for EHSs are listed in Appendices A and B of this part RQs for CERCLA hazardous substances are listed in Table of 40 CFR : You must make two separate notifications to comply with the emergency release notification requirements of this subpart: an immediate notification, and as soon as practicable thereafter a written follow-up notification (or notifications, as more information becomes available) : The immediate notification should be oral. The follow-up emergency notification shall be in writing (Note: The LEPC may request a specific format for this information.) : You must provide the immediate emergency release notification information to: (1) The community emergency coordinator for the LEPC of any area likely to be affected by the release, and (2) The SERC of any State likely to be affected by the release
22 Response : DOT Incident Notification 49 CFR All incidents involving hazmat in transport must be reported in accordance with the regulatory requirements of 49 CFR and : 49 CFR requires immediate notification as soon as practical but no later than 12 hours by calling the National Response Center (NRC, ) to report certain hazmat incidents including: Any fatality or injury requiring admission to a hospital, sustained as a direct result of a hazardous material Any time the general public is evacuated or a major transportation artery or facility is closed or shut down for one hour or more due to release or threatened release of hazmat in transport Any time the operational flight pattern or routine of an aircraft is altered due to hazmat incident Fire, breakage, spillage, or suspected contamination involving radioactive material or infectious substance Release of a marine pollutant >119 gallons (>450 liters) for a liquid or >882 lbs (400 kg) for a solid Any fire, violent rupture, explosion, or dangerous evolution of heat during transport of hazmat by aircraft Any other situation where the judgment of the person in possession of the hazmat suggests that it should be reported to the NRC`
23 Response : DOT Incident Reporting 49 CFR CFR requires submittal of a detailed hazmat incident report utilizing DOT Form F (01/2004) within 30 days of any of the following: For any of the incidents reported under 49 CFR on the preceding slide, or Unintentional release of hazmat or hazardous waste, or Structural damage to hazmat lading retention system for any specification cargo truck with capacity 1000-gallons, or Discovery of an undeclared hazmat, or Fire, violent rupture, explosion, or dangerous evolution of heat as a direct result of a battery or battery-powered device. Reports shall be submitted to the Information Systems Manager at PHMSA. Additionally, for any hazmat incident involving transportation by aircraft, a copy of the incident report shall be submitted to the Federal Aviation Administration (FAA) Security Field Office nearest the location of the incident.
24 Response: DOT Emergency Response Info 49 CFR 172 Subpart G 49 CFR require certain, specific information to accompany hazardous materials in transit, specifically for reference in the event of a hazmat emergency requires that shippers provide an emergency response telephone number that is: Monitored at all times that the hazmat is in transportation (24/7) and Will be answered by a person who is either knowledgeable of the hazmat being shipped and has comprehensive emergency response and incident mitigation information for that material, or has immediate access to a person who possesses such knowledge and information. A commercial service hotline may be used for this purpose (e.g., Chemtrec), but the hazmat must be covered by a pre-existing contract between the shipper and the service provider requires that shippers must provide emergency response information for use in the mitigation of a hazmat incident: Info provided must include basic description and technical name of the hazmat, immediate health hazards, risks of fire or explosion, immediate precautions to be taken in the event of an incident, immediate methods for handling fires, initial methods for handling spills or leaks, and preliminary first aid measures. This info must be printed legibly in English and available for use away from the hazmat packaging. This information can be presented on a shipping paper, in a separate document (e.g., SDS), or one can reference the appropriate guide number in the Emergency Response Guidebook.
25 Response: OSHA HAZWOPER 29 CFR OSHA requires that only HAZWOPER -trained responders may respond to a hazmat emergency. HAZWOPER stands for: Hazardous Waste Operations & Emergency Response The HAZWOPER regulations at 29 CFR spell out requirements for emergency preparedness, training, and response, all for the protection of hazmat responders. While the HAZWOPER regs are codified within the OSHA volume of federal regulations (29 CFR), the are administered and enforced by OSHA and/or EPA.
26 Response: OSHA HAZWOPER (cont.) 29 CFR HAZWOPER applies to Environmental clean-up operations required by any governmental body (whether federal, state, or local) to address releases of hazardous substances This includes clean-up of Superfund sites on EPA s National Priority List (NPL) This also includes initial investigations of government-identified sites which are conducted before the presence (or absence) of hazardous substances has been ascertained. Corrective Actions at hazardous waste sites covered by RCRA Voluntary clean-up operations at recognized hazardous waste sites All operations (routine & non-routine) involving handling of hazardous waste at EPA-regulated Treatment, Storage & Disposal (TSD) facilities Emergency response operations for releases (or threatened releases) of hazardous substances without regard to location of the hazard
27 Response: OSHA HAZWOPER (cont.) 29 CFR With regard to emergency response, HAZWOPER (a)(2)(iv) says: Emergency response operations for releases of, or substantial threats of releases of hazardous substances which are not covered by (any other) paragraphs of this section must only comply with the requirements of paragraph (q) of this section (q) spells out requirements for a HAZWOPER-compliant: Emergency response program to hazardous substance releases Paragraph (q) requires or regulates 11 specific emergency response elements: An Emergency Response Plan (ERP) Specified elements of an ERP Procedures for emerg resp Skilled support personnel (contractors) Specialist employees Training Trainers Refresher training Medical surveillance Chemical protective clothing Post-emergency response operations
28 Response: OSHA HAZWOPER (cont.) 29 CFR HAZWOPER (q)(6) specifies five levels of training for individuals assuming different emergency response roles: First Responder Awareness Level (applies everybody who may encounter a hazmat emergency) First Responder Operations Level (allows for defensive responses only!) Hazardous Materials Technician (requires 24 hours of initial training) Hazardous Materials Specialist (requires at least 24 hours of initial training) On-Scene Incident Commander (requires at least 24 hours of initial training) HAZWOPER (q)(8) requires: Annual refresher training of sufficient content and duration to maintain their competencies or alternately That trained responders shall demonstrate competency in those areas at least yearly.
29 Response: OSHA HAZWOPER (cont.) 29 CFR HAZWOPER (q)(6)(iii) defines HazMat Technicians as: Hazardous materials technicians are individuals who respond to releases or potential releases for the purpose of stopping the release. They assume a more aggressive role than a first responder at the operations level in that they will approach the point of release in order to plug, patch or otherwise stop the release of a hazardous substance. Hazardous materials technicians shall have received at least 24 hours of training equal to the first responder operations level and in addition have competency in the following areas and the employer shall so certify
30 Response: OSHA HAZWOPER (cont.) 29 CFR A HazMat Technician shall: Know how to implement the employer s emergency response plan (q)(6)(iii)(a) Know the classification, identification, and verification of known and unknown materials by using field survey instruments and equipment (q)(6)(iii)(b) Be able to function within an assigned role in the Incident Command System (q)(6)(iii)(c) Know how to select and use proper specialized chemical personal protective equipment provided to the hazardous materials technician (q)(6)(iii)(d)
31 Response: OSHA HAZWOPER (cont.) 29 CFR A HazMat Technician shall also: Understand hazard and risk assessment techniques (q)(6)(iii)(e) Be able to perform advance control, containment, and/or confinement operations within the capabilities of the resources and personal protective equipment available with the unit (q)(6)(iii)(f) Understand and implement decontamination procedures (q)(6)(iii)(g) Understand termination procedures (q)(6)(iii)(h) Understand basic chemical and toxicological terminology and behavior (q)(6)(iii)(g)
32 Response: DOT Use of Authorized Packagings 49 CFR 173 DOT requires that any hazmat to be transported may only be shipped in authorized packagings (with UN markings appropriate to the hazmat to be shipped). This requirement would be triggered at the time that the packaging is offered for shipment, however, if emergency responders are containerizing spilled hazmat in anticipation of shipping it offsite, it only makes sense that they should select containers appropriate for subsequent offsite shipment! This Shipper s Responsibility is codified at 49 CFR : The person shall determine that the packaging or container is an authorized packaging, including part 173 requirements, and that it has been manufactured, assembled, and marked in accordance with section 173.7(a) and 173, 178, or 179 of this subchapter At a minimum, an authorized packaging will have a UN mark. A container marked X or Y should be selected to meet or exceed the specific hazmat s packaging group (PG) as listed in the HazMat Table at 49 CFR (column 5). Additionally, the container shall be marked with either solids rating ( S, in kg) or a specific gravity rating (for liquids or solid equivalence) that will meet or exceed the mass or density of the hazmat to be shipped.
33 Response: DOT Salvage Drums 49 CFR 173.3(c) Where emergency response requires containerization of damaged, leaking, or otherwise compromised containers, DOT s Salvage Drum requirements at 49 CFR 173.3(c) apply: Packages of hazardous materials that are damaged, defective, or leaking; packages found to be not conforming to the requirements of this subchapter and hazardous materials that have spilled or leaked may be placed in a metal or plastic removable head salvage drum that is compatible with the lading A salvage drum must be UN 1A2, 1B2, 1N2, or 1H2 tested and marked for PG III or higher performance standards for liquids or solids and a leakproofness test of 20 kpa. Alternately, a salvage packaging marked T in accordance with applicable provisions in the UN recommendations may be used. When necessary, each drum shall be provided with sufficient (compatible) cushioning and absorption material to prevent excessive shifting of the damaged package and to eliminate the presence of any free liquid at the time the salvage drum is closed. Each salvage packaging must be marked SALVAGE. The lettering of the marking must be at lease 0.5 inches high.
34 Response: EPA RCRA Haz Waste Mgt 40 CFR 261, 262, 265 When clean-up materials will be characterized or listed as Hazardous Waste (per 40 CFR 261 Subpart C or Subpart D), RCRA hazardous waste management standards will apply to any such waste containerized and accumulated onsite, including: : must use a container made of or lined with materials which will not react with, and are otherwise compatible with, the hazardous waste to be stored (b): Hazardous waste must not be placed in an unwashed container that previously held an incompatible waste or material : If a container holding hazardous waste is not in good condition, or if it begins to leak, the owner or operator must transfer the hazardous waste from this container to a container that is in good condition (a): A container holding hazardous waste must always be closed during storage, except when it is necessary to add or remove waste : Containers holding ignitable or reactive waste must be located at least (50 feet) from the facility s property line (a)(1)(iv)(B)(3): While being accumulated onsite, each container and tank is labeled or clearly marked with the words Hazardous Waste (a)(1)(iv)(B)(2): The date upon which each period of accumulation begins is clearly marked and visible for inspection on each container : At least weekly must inspect areas where containers are stored
35 Response: Afterthoughts As the incident transitions from emergency response to clean-up and mitigation, don t forget follow-up notifications and reports, including: Report of any fatalities (within 8 hours) or any employee s amputation, loss of an eye, or hospitalization (within 24 hours) to OSHA per 29 CFR (a) For an EPCRA incident, submit a written follow-up report to your LEPC per 40 CFR 355:40 as soon as practicable. For a transportation incident, submit a follow-up report to PHMSA utilizing DOT Form F within 30 days. Double-check to see if any state or local regulatory programs or authorities require additional follow-up reports. Your are strongly advised to consult legal counsel to ensure that all regulatory obligations have been met. This presentation is not intended as a substitute for legal counsel Contract qualified professionals to complete clean-up work and to remediate the site, as may be necessary. Debrief affected employees and responders after the incident. With their input, review your emergency response plan(s) for any deficiencies and revise as appropriate. Retrain your employees on any revisions to the site emergency response plan(s). Restock spill response, firefighting, and first aid supplies as soon as possible. Ship solid or hazardous wastes to an appropriate RDF or TSDF within 90 days, in accordance with RCRA and DOT requirements.
36 Any Questions? Thank you for your interest! Corinne M. Greenberg, CHMM Environmental Manager Carbide Industries LLC This slide deck (as well as all the others from today s workshop) will be available online at the Chapter website,
Hazardous Material Emergency Spill Response Protocol WAC 296-824 1.0 Policy PLU s highest priority is to protect employee and student health and safety. On that basis, PLU employees or students will not
HAZARD COMMUNICATION PROGRAM Adopted: February 2014 Table of Contents Table of Contents Introduction... 1 Scope... 1 2.1 Employees Covered... 1 2.2 Research Laboratory Exemption... 1 2.3 Substances Covered...
Written Programs Listing Bloodborne Pathogens (BBP) (29CFR1910.1030) This standard requires that precautions be taken to prevent the transmission of bloodborne pathogens. Viruses and bacteria can be found
Regulatory Citation What It Is Who It Applies To OSHA - 29 CFR 1910.120(q)(1) - Emergency Response Plan Standard improves the ability of employees and employers to respond to emergencies caused by releases
HAZARDOUS INCIDENT SITE SAFETY PLAN NOTE: A site-specific Site Safety Plan must be developed and implemented for each site where investigators may potentially be exposed to hazardous substances while conducting
Hazard Classifications Used in Hazmat Table, Column 3 Class Number None None Division Number (if any) Name of class or division... Forbidden Material... Forbidden Explosives Class 1 (Explosive) Known hazards
Addendum 4 Levels of Response Levels of Response to a Hazardous Materials Incident A. Criteria for Categorization Hazardous materials incidents are categorized as Level I, II, or III depending on the severity
San José State University One Washington Square San José, California Facilities Development and Operations Department July 11, 2012 Page intentionally left blank SJSU_Hazard Communication Program_2012-0711.docx
SECTION 1 PRODUCT AND COMPANY IDENTIFICATION Product Name : No. 7055 Recommended use : General purpose hand sanitizer Product dilution information : Product is sold ready to use. Manufactured for : Mada
SSS SECTION 1 PRODUCT AND COMPANY IDENTIFICATION Product Name : SSS Product Codes Recommended use Product dilution information : 44018, 44256, 44600, 44611 : Hand sanitizer : Product is sold ready to use.
Material Safety Data Sheet Section 1 General Information Manufacturer: Zinsser Company, Inc. 173 Belmont Drive Somerset, NJ 08875 (732) 469-8100 Emergency Telephone: Chemtrec (800) 424-9300 Date: December
Section 33 TABLE OF CONTENTS Hazardous Waste Operations and Emergency Response (HAZWOPER) Section: Page 33.A General... 33-1 33.B Site Safety and Health Plan (SSHP)... 33-1 33.C Responsibilities... 33-4
MEPC 44/20 RESOLUTION MEPC.86(44) THE MARINE ENVIRONMENT PROTECTION COMMITTEE, RECALLING Article 38(a) of the Convention on the International Maritime Organization concerning the function of the Committee,
Northeast Biomanufacturing Center and Collaborative Hazard Communication Program (HCP) NBC-HCP-000 Date Issued: 06/27/06 Date Revised: 05/30/07 APPLICIPABLE STANDARD: 29CFR1910.1200 OSHA s Hazard Communication
CITY OF LOS ANGELES PERSONNEL DEPARTMENT HAZARD COMMUNICATION PROGRAM Approved by: Najma S. Bashar Title: Safety Administrator, Personnel Department Date: 5/1/2017 Table of Contents Purpose... 3 Rights
Page 1 of 9 ISSUED: 5/00 REVISED: 08/06 Introduction Purpose: In accordance with applicable regulations and Temple University, this policy was developed to minimize exposure to Ethylene Oxide. Applicability
PSM SOLUTIONS: AMMONIA SCR SYSTEMS 1 Issues that surround the storage of anhydrous ammonia 1. Government Audit/Citation Exposure a. OSHA i. NEP ii. PQV b. EPA 2. Safety Issues a. Burns b. Respiratory c.
Oshkosh Safety Council Helping Keep Oshkosh Area Business & Industry Safe GHS What does it really mean? WAS RIGHT TO KNOW..NOW RIGHT TO UNDERSTAND Current basic elements of a Hazard Communication Program.
WHMIS WORKPLACE HAZARDOUS MATERIALS SYSTEM WHMIS 2015 is a system that sets out the requirements for providing information on the safe use of hazardous products used in the workplace. It aims at informing
S A F E T Y D A T A S H E E T 3141 Clifty Drive Madison, IN 47250 NAME: SECTION 1: PRODUCT AND COMPANY IDENTIFICATION COMPOUND AC-35L TYPE: Alkaline cleaner PRODUCT # 299401 FOR INDUSTRIAL USE ONLY KEEP
S A F E T Y D A T A S H E E T 3141 Clifty Drive Madison, IN 47250 NAME: SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PROTECT ALL TYPE: Corrosion inhibitor PRODUCT # 802341 EMERGENCY RESPONSE INFORMATION:
Safety Data Sheet Issue Date 03-16-2015 Revision Number 2 1. Identification of the Substance/Preparation and of the Company/Undertaking Product identifier Product name Refresh Other means of identification
Cal Poly - San Luis Obispo Hazard Communication Program Revision History: April 1994 Original March 2011 Revision 1 April 2013 Revision 2 October 2017 Revision 3 (Current) Table of Contents I. Reference...
Material Safety Data Sheet Section 1 General Information Manufacturer: Rust-Oleum Corporation 11 Hawthorn Parkway Vernon Hills, IL 60061 24 Hour Assistance: 1-847-367-7700 www.rustoleum.com Date: April
Compressed Gas Safety Program Purpose: The purpose of this safety policy and procedure is to establish guidelines for the protection and safety of this company s employees who handle and use compressed
MATERIAL SAFETY DATA SHEET Page 1 of 6 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION MATHESON TRI-GAS, INC. Emergency Contact: 150 Allen Road Suite 302 CHEMTREC 1-800-424-9300 Basking Ridge, New Jersey
Safety Manual Page 1 of 8 1. Purpose The purpose of this policy is to protect USPL employees and contractors from overexposure to benzene. 2. Scope This policy applies to all USPL employees and contractors
Title: Safe Storage, Handling, Use and Disposal Procedures of Compressed Gas Cylinders Effective Date: November 2005 Revision Date: March 1, 2017 Issuing Authority: Responsible Officer: VP, Capital Projects
SECTION 1 PRODUCT AND COMPANY IDENTIFICATION Product Name: PREVENT ALCOHOL GEL Product Code: 1077 Recommended Use: Cleaning Agent Uses Advised Againts: For Industrial and Institutional Use Only Manufacturer/Supplier:
: Calibration and Bump Test Requirements for Direct Reading Portable Gas Monitors Manufacturers and regulatory agencies agree the safest and most conservative approach is to perform a functional test by
Date: 2/23/2012 Revision: 01 Material Safety Data Sheet SeaKlear: Free & Klear SECTION 1: PRODUCT AND COMPANY IDENTIFICATION Manufacturer's Name: HaloSource, Inc. Corporate Address: 1631 220 th St. SE,
Material Safety Data Sheet Section I General Information Manufacturer: HMIS Rating KAL-GARD HEALTH: 1 1347 Poole Street FLAMMABILITY: 1 Mojave, CA 93501 REACTIVITY: 0 (661) 824-8101 Emergency Telephone:
SECTION 1: Product and company identification Product name : Banish Use of the substance/mixture : Herbicide Product code : 0318 Company : Total Solutions P.O. Box 240014 Milwaukee, WI 53224 - USA T (414)
Page 1 of 5 MATERIAL SAFETY DATA SHEET 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Elmer's Products, Inc. Emergency Phone Number: 1 Easton Oval Poison Control Center Columbus, OH 43219 1-888-516-2502
S A F E T Y D A T A S H E E T 3141 Clifty Drive Madison, IN 47250 NAME: SECTION 1: PRODUCT AND COMPANY IDENTIFICATION NEUTRALIZER S TYPE: Strong mineral acid PRODUCT # 784201 FOR INDUSTRIAL USE ONLY KEEP
SAFETY DATA SHEET Issue Date 29-Mar-2015 Version 1 1. PRODUCT AND COMPANY IDENTIFICATION Product identifier Product Name Other means of identification SDS# Synonyms Ultra hard Lithium Densifier JC-017-015
NAVY AND MARINE CORPS PUBLICH HEALTH CENTER ENVIRONMENTAL PROGRAMS DIRECTORATE Site-Specific Health and Safety Plan Review Checklist Enclosed is the latest version () of the Site-Specific Health and Safety
1. Product And Company Identification Product Name: Responsible Party: ARMOR ALL Ultra Shine Wash & Wax Detailer Information Phone Number: +1 203-205-2900 Emergency Phone Number: For Medical Emergencies,
SSS SECTION 1 PRODUCT AND COMPANY IDENTIFICATION Product Name : SSS Product Code : 44112, 44117 Recommended use : Industrial hand cleaner Product dilution information : Product is sold ready to use. Manufactured
This material safety data sheet (MSDS) was prepared solely for the reference of, and as a courtesy to, Shurtape's customers. The adhesive tape product to which this MSDS refers is a manufactured item that
Date of Issue: 04 February 2014 SAFETY DATA SHEET 1. SUBSTANCE AND SOURCE IDENTIFICATION Product Identifier SRM Number: 1567b SRM Name: Wheat Flour Other Means of Identification: Not applicable. Recommended
S A F E T Y D A T A S H E E T 3141 Clifty Drive Madison, IN 47250 NAME: TYPE: PRODUCT # SECTION 1: PRODUCT AND COMPANY IDENTIFICATION Acidic solution EMERGENCY RESPONSE INFORMATION: CHEMTREC Company Offices:
MATERIAL SAFETY DATA SHEET Product Name: CDI-High Purity Urea Solution, 40% (CDI HP-40) Page 1 of 6 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Name: Generic Name: Chemical Family: Responsible
SAFETY DATA SHEET Version 1 1. IDENTIFICATION Product identifier Product Name Aqua Guard Mustard Algaecide Other means of identification Product Code 26418845044 Recommended use of the chemical and restrictions
Date of issue: 07/18/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : Mixture : 1.2. Relevant identified
Safety Data Sheet Issue Date: 24-Oct-2014 Version 1 1. IDENTIFICATION Product Identifier Product Name Other means of identification SDS # Buckeye Eco Odor Eliminator BE-E6041 Product Code E 6041 Recommended
Revised Hazard Communication Standard (GHS) Triumvirate Environmental Why is GHS Needed? No country has the ability to identify and specifically regulate every hazardous chemical product For example, in
MATERIAL SAFETY DATA SHEET Page 1 of 6 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION MATHESON TRI-GAS, INC. Emergency Contact: 150 Allen Road Suite 302 CHEMTREC 1-800-424-9300 Basking Ridge, New Jersey
ABSTRACT THE FOLLOWING IS A SUMMARY OF THE LEGAL REQUIREMENTS (PER MSHA REGULATIONS) FOR POSTING AND DOCUMENTATION. THESE ARE THE MINIMUM REQUIREMENTS AT EACH PLANT, AND DO NOT INCLUDE ALL OF THE IN-HOUSE
SPECIALIZED ONLINE TRAINING COURSE LIST Grainger Online Safety Manager provides you with access to online training courses covering today's most relevant safety topics. The training content is designed
Material Safety Data Sheet NFPA HMIS Issuing Date January 9, 2010 Revision Number 0 NFPA/HMIS Ratings Legend Severe = 4; Serious = 3; Moderate = 2; Slight = 1; Minimal = 0 1. PRODUCT AND COMPANY IDENTIFICATION
SECTION 1 PRODUCT AND COMPANY IDENTIFICATION Product Name : Product Codes : 4902, 4907 Recommended use : Industrial hand cleaner Product dilution information : Product is sold ready to use. Company : Kutol
GHS Are You Ready? Up Stream Disposal or Abandonment Phase Chemical Lifecycle Up Stream Development Phase and R&D Down Stream Customer or End User Phase Up Stream Ben Hissam, BWC, Safety Consultant Manufacture
SECTION 1 PRODUCT AND COMPANY IDENTIFICATION Product Name : Product Code : A7881 Recommended use : General purpose hand soap Product dilution information : Product is sold ready to use. Manufactured for
Page 1/6 * 1 Identification of the substance/mixture and of the company/undertaking Product identifier Catalog or product number: 9704808 Application of the substance / the preparation Laboratory chemicals
1. Product And Company Identification Product Name: Responsible Party: ARMOR ALL Air Freshening Protectant Pure Linen Information Phone Number: +1 203-205-2900 Emergency Phone Number: For Medical Emergencies,
1. Product And Company Identification Product Name: Responsible Party: ARMOR ALL Auto Glass Cleaner Information Phone Number: +1 203-205-2900 Emergency Phone Number: For Medical Emergencies, call 1-866-949-6465
1. IDENTIFICATION Product Name Other Names N2 Recommended use of the chemical and restrictions on use Identified uses Fire Extinguishing Expellant Restrictions on use Consult applicable fire protection
HAZARD COMMUNICATION STANDARD (HCS) GLOBALLY HARMONIZED SYSTEM (GHS) OR-OSHA Standard 29 CFR 1910.1200 Table of Contents Purpose... 2 Accountability... 2 Container Labeling... 2 Safety Data Sheets... 3
1 of 5 SAFETY DATA SHEET Nomaco, Inc. Section 1: Identification Product Identifier: Product Name... : Nomafoam Chemical Family... : Polymeric; Polyethylene Plastic Recommended Use..: Nomaco Foam can be
Operations: HSE Health and Industrial Hygiene Laboratory Safe Work Practice Page 2 of 8 AMENDMENT RECORD Amendment Date Revision Number Revision Number 08/11/2016 4 Authority: Health Manager Custodian:
MATERIAL SAFETY DATA SHEET Page 1 of 7 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION MATHESON TRI-GAS, INC. EMERGENCY CONTACT: 959 ROUTE 46 EAST CHEMTREC 1-800-424-9300 PARSIPPANY, NEW JERSEY 07054-0624
Revision Date: 09/28/2016 Supersedes: 09/28/2016 Version: 1.0 SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY 1.1. Product Identifier Product Form: Substance Product Name: Alkyl Benzoate
Page: 1 of 5 according to Regulation (EC) No. 1907/2006 as amended by (EC) No. 1272/2008 Section 1. Identification of the Substance/Mixture and of the Company/Undertaking 1.1 Product Code: Product Name:
OSHA Updates for the Aviation Maintenance Technician Bob Gould Bravo Golf Aviation Bob Gould Who Am I? dba Bravo Golf Aviation 47 years in aviation and aircraft maintenance Retired from US Navy and industry
Page: 1 of 6 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: GENERAL USE: Swimming pool water enhancer. CHEMICAL FAMILY: Inorganic oxide MANUFACTURER Asepsis, Inc. Omni P.O. Box 537 Avondale
SECTION 1: Product and company identification Product name : Renown Gym/Facility Wipes Use of the substance/mixture : Premoistened wipe Product code : 3554036 SDS Number: 15747020 Company : Interline Brands
SECTION 0. GENERAL INFORMATION This item meets the definition of article in the OSHA Hazard Communication Standard, 29 CFR 1910.1200. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Trade name : Super Firetemp
SECTION 1: Product and company identification Product name : Fly Away Insect Repellent Wipe Use of the substance/mixture : Chemical intermediate Industrial use Pesticide Product code : 74189 SDS Number:
SAFETY DATA SHEET Issuing Date 5/01/2015 The supplier identified below generated this SDS using the UL SDS template. UL did not test, certify, or approve the substance described in this SDS, and all information
SAFETY DATA SHEET Issuing Date 24-Jul-2013 Revision Date 14-Jun-2016 Revision Number 4 The supplier identified below generated this SDS using the UL SDS template. UL did not test, certify, or approve the
DYPLAST PRODUCTS UNFACED RIGID POLYISOCYANURATE FOAM SAFETY DATA SHEET DYPLAST PRODUCTS, LLC 12501 NW 38TH AVENUE MIAMI, FLORIDA 33054 IMPORTANT: Read this SDS before handling and disposing of this product