MINIATURE COMBINATION UNITS Filter/regulators and lubricators P1H - G1/8, G1/4
|
|
- Alexis Shaw
- 6 years ago
- Views:
Transcription
1 P1H INITURE COINTION UNITS ilter/regulators and lubricators P1H - 1/8, 1/4 Combinations of filterregulators and lubricators can be ordered as pre-assembled units Complete control of filtration, regulation and lubrication at a single point icro-fog versions for most general purpose pneumatic applications TECHNICL DT edium: Compressed air only aximum inlet pressure: 10 mbient temperature: -20 C C Consult our Technical Service for use below +2 C Pressure range: 0,3... 8, TERILS ody: zinc alloy owls: polycarbonate ilter element: polypropylene Elastomers: nitrile kg ODELS uto CCESSORIES Neck bracket auge /8 0,35 P1H-100-3Q P1H-100-3Q /4 0,35 P1H-200-3Q P1H-200-3Q P H- - Integral wall bracket Without (P1H Combination Unit) 1 With T PT ISO Rc taper ISO parallel 1/8" 1 1/4" 2 ilter/regulator bowl Outlet pressure djustment range* psig Relief type auge Transparent 0,3... 8, Relieving Without 01 Transparent 0,3... 8, Non relieving Without 02 Transparent 0, Relieving Without 04 Transparent 0, Non relieving Without 0 etal 0,3... 8, Relieving Without 41 etal 0,3... 8, Non relieving Without 42 etal 0, Relieving Without 44 etal 0, Non relieving Without 4 * Do not use these units to control pressures outside of the specified ranges Lubricator reservoir Transparent with Transparent without etal with etal without Q ilter/regulator element 5 μm 1 40 μm 3 ilter/regulator utomatic
2 98** 94*** 78**** 211# LOW CHRCTERISTICS 8 8 Outlet pressure 4 Outlet pressure DIENSIONS 90 : 1/4" Inlet pressure: 7 Range: 0, : 1/4" Inlet pressure: 10 Range: 0, ir flow ir flow # inimum clearance to remove bowl ** ***utomatic ****Without. -089
3 INITURE ENERL PURPOSE ILTERS 07-1/8, 1/4 07 Direct ported filters with high water removal efficiency utomatic s supplied as standard High flow miniature unit Transparent bowl for 30 visibility TECHNICL DT edium: Compressed air only aximum inlet pressure: 10 mbient temperature: -34 C C Consult our Technical Service for use below +2 C TERILS owl: polycarbonate to S 005, zinc alloy (optional) ody: zinc alloy Elastomers: neoprene & nitrile ilter element: polypropylene ODELS CCESSORIES SERVICE KIT low* () uto Wall bracket uto 1/ T T KIT40 07-KIT40 1/4 11, T T KIT40 07-KIT40 *Typical flow with,3 inlet pressure and 0,5 pressure drop /8" 1 1/4" 2 PT ISO Rc taper ISO parallel owl Transparent etal T Element 5 μm 1 40μm 3 Drain utomatic
4 LOW CHRCTERISTICS Inlet pressure () Pressure drop 0, 0,5 0,4 0,3 0,2 0,1 1,0 1, 2,5 4,0,3 8,0 10,0 : 1/4 40 μm element ir flow DIENSIONS C racket D * Ø E utomatic * inimum clearance required to remove bowl Series Drain C Ø kg Series D E H 07 1/8, 1/4 uto , /8, 1/ ,13-091
5 INITURE OIL REOVL ILTERS 39-1/8, 1/4 39 High efficiency coalescing oil-removal filters aximum remaining oil content 0,01 mg/m 3, particle removal to 0,01 μm TECHNICL DT edium: Compressed air only aximum inlet pressure: 10 (transparent bowls) 17 (metal bowls) Remaining oil content: 0,01 mg/m 3 maximum Particle removal: 0,01 μm mbient temperature: -34 C C transparent bowls -34 C C metal bowls Consult our Technical Service for use below +2 C TERILS owl: polycarbonate to S 005, zinc alloy (optional) ody: zinc alloy Elastomers: neoprene & nitrile ain filter element: synthetic fibre & polyurethane foam ODELS CCESSORIES SERVICE KIT low* owl kg uto () Wall bracket 1/8 2,8 Transparent 0, T T ,8 etal 0, /4 3 Transparent 0, T T etal 0, # aximum flow with,3 inlet pressure to maintain stated oil removal performance. or optimum coalescing element life a pre-filter should be fitted to remove coarse particles. oil removal filters are not recommended in service where plant maintenance is irregular. Consult our Technical Service for further details /8" 1 1/4" 2 PT ISO Rc taper ISO parallel Drain utomatic owl Transparent etal T Element Coalescing
6 TYPICL PERORNCE CHRCTERISTICS Inlet pressure aximum flow * () ,2 3 2,0 5 2,7,3 3,0 7 3,1 9 3, * aximum flow to maintain stated oil removal performance DIENSIONS C racket E D # utomatic # inimum clearance required to remove bowl Series Drain C Ø kg Series D E 39 1/8, 1/4 uto , , /8, 1/ LOW CHRCTERISTICS Inlet pressure () Pressure drop 0, 0,5 0,4 0,3 0,2 0,1 2,5 4,0,3 8,0 10,0 : 1/4 Element: Dry ir flow -093
7 INITURE PRESSURE REULTORS R07-1/8, 1/4 R07 iniature regulators for general purpose pneumatic applications Relieving operation as standard Non-rising adjusting knob with snap-action lock Options include non-relieving models and alternative spring ranges TECHNICL DT edium: Compressed air only aximum inlet pressure: 20 auge ports: Rc1/8 mbient temperature: -34 C C Consult our Technical Service for use below +2 C Pressure range: 0, TERILS ody: zinc alloy djusting knob: acetal resin Elastomers: nitrile low* () kg ODELS Pressure 0,3 7 Pressure 0,5 10 CCESSORIES Neck bracket auge 0 10 Panel nut SERVICE KIT 1/8.5 0,19 R RNK R RN (Plastic nut) R07-KITR 1/4 7 0,19 R RNK R RN (etal nut) R07-KITR *Typical flow with 10 inlet pressure,.3 set pressure and 1 drop from set. R Size 1/8" 1 1/4" 2 Option Standard 0 H.P. unit, 10 (150 psig) 5** * Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges. ** When specifying 10 (150 psig) unit, eg. R RN, also note correct code at th digit. PT ISO Rc taper ISO parallel Outlet pressure adjustment ranges* 0,1... 0,7 0,3... 3,5 E 0, K 0, ** auges With Without N Diaphragm Relieving Non relieving R N
8 LOW CHRCTERISTICS 8 Inlet pressure (10 ) : 1/4 Range: 0, Outlet pressure ir flow DIENSIONS ø 28 racket ø 30 max. (42) Weight: 0,19 kg ø
9 INITURE ILTER/REULTORS 07-1/8, 1/4 07 ilter-regulators for all general purpose pneumatic applications High performance design provides high flow with minimum pressure drop Non-rising adjusting knob has snap-action lock Transparent bowl for 30 visibility etal bowl for high pressures Standard options include nonrelieving models, metal bowls and alternative pressure ranges TECHNICL DT edium: Compressed air only aximum inlet pressure: 10 auge ports: Rc1/8 Pressure range: 0, mbient temperature: -34 C C Consult our Technical Service for use below +2 C TERILS ody: zinc onnet: acetal Valve: brass/nitrile Valve seat: acetal owl: transparent polycarbonate; metal zinc Element: sintered polypropylene Elastomers: nitrile low* () ODELS CCESSORIES SERVICE KIT uto ounting bracket and nut auge 0 10 Panel nut uto 1/8, K K (Plastic nut only) 07-KIT40R 07-KIT40R 1/4, K K (etal nut only) 07-KIT40R 07-KIT40R *Typical flow with 10 inlet pressure,.3 set pressure and 1 drop /8" 1 1/4" 2 PT ISO Rc taper ISO parallel owl Relief type auge Transparent Relieving Without 01 Transparent Non relieving Without 03 etal Relieving Without 33 etal Non relieving Without 35 etal Relieving Without 05** etal Non relieving Without 07** * Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges. ** When specifying 10 (150 psig) unit, eg , also note correct code at 5th and th digits. Outlet Pressure djustment Ranges* 0, , E 0, K 0, ** Element 5 μm 1 40 μm 3 Drain utomatic -09
10 DIENSIONS N racket # D C * utomatic # inimum clearance required to remove bowl *1/8" SP connection Drain C D Panel Ø Panel depth kg 1/8, 1/4 uto , ,2 LOW CHRCTERISTICS Inlet pressure (10 ) : 1/4" 40 μm element Range 0, Outlet pressure ir flow -097
11 INITURE LURICTORS L07-1/8, 1/4 L07 icro-fog lubricators provide a fine mist for most general purpose pneumatic applications Transparent bowl for 30 visibility TECHNICL DT edium: Compressed air only aximum inlet pressure: 10 Start point: 0,24 inimum flow required for lubricator operation at,3 inlet pressure mbient temperature: -20 C C Consult our Technical Service for use below +2 C TERILS owl: polycarbonate, zinc alloy (optional) ody: zinc alloy Sight-feed dome: transparent nylon Elastomers: neoprene & nitrile ODELS CCESSORIES SERVICE KIT low* () kg Neck bracket 1/8 5 0,13 L PQ L07-KIT 1/4,7 0,13 L PQ L07-KIT *Typical flow with.3 inlet pressure and 0.5 pressure drop L07-00-P 1/8" 1 1/4" 2 PT ISO Rc taper ISO parallel owl and Transparent without etal with Q
12 DIENSIONS racket * C E D Without # inimum clearance required to remove bowl Series C Ø kg Series D E H L07 1/8, 1/ ,1 L07 1/8, 1/ LOW CHRCTERISTICS Inlet pressure () 0, 1,0 2,0 4,0,3 8,0 10,0 Pressure drop 0,5 0,4 0,3 0,2 0,1 : 1/ ir flow -099
13 INITURE RELIE VLVES Diaphragm type V07-1/8, 1/4 V07 Protect compressed air systems from over-pressurisation Norgren pressure relief valves comply with category O(S.E.P.) and category 1 of the Pressure Equipment Directive 97/23/EC. TECHNICL DT edium: Compressed air only auge ports: Rc1/8 Relief port: s inlet port Pressure range: 0,3...9 mbient temperature: -34 C C Consult our Technical Service for use below +2 C Relief pressure adjustment range: 0, TERILS ody: zinc alloy djusting knob & bonnet: acetal resin Valve seat: polyphenylene Elastomers: nitrile ODELS CCESSORIES SERVICE KIT kg Neck bracket auge /8 0,13 V NNL V07-KIT 1/4 0,13 V NNL V07-KIT V07-00-N Size 1/8" 1 1/4" 2 auges With Without DIENSIONS 28 N racket kit (V07) 24 LOW CHRCTERISTICS PT ISO Rc taper ISO parallel Relief pressure adjustment ranges 0,1... 0,7 0,3... 3,5 E 0, K 0, Ø 30 max Relief pressure R c 1 /8 1 : 1/ ir flow
14 INITURE ERNE DRIERS W07-1/4 W07 Removes water vapour from compressed air Provides dewpoint suppression up to 44 C below the ambient temperature, depending on air flow through the membrane Dewpoint suppression of 11 C below the ambient temperature is suitable for most industrial applications W07 available for in-line installation only Easy installation, no power required aintenance free with proper pre-filtration inimal pressure drop TECHNICL DT edium: Compressed air, pre-filtered to 0,01 μm and oil free aximum operating pressure: 10 mbient temperature: -20 C C* *ir supply must be dry enough to avoid ice formation at temperatures below +2 C. Required pre-filter: eneral purpose filter (5 μm element) and an oil removal filter (0,01 μm particle removal) with equivalent pipe and flow capacity equal to or greater than the membrane air dryer Selection programme available on request TERILS ody and end caps: nodized aluminium embrane: polymeric materials Nominal flow ()* Outlet Inlet Differential pressure () kg ODELS 1/4 1,00 1,0 0,028 0,39 W07-2N-NN *7 inlet pressure, C ambient temperature and dew point suppression of 11 C PT ISO parallel DIENSIONS W07-2N-NN ºC W07-2 N-NN LOW CHRCTERISTICS W07-2N-NN Dewpoint suppression C D E : 1/4" Range: 0,1... 1,0 Inlet air dewpoint: C Inlet 20 pressure () = 3,5 = 5 10 C = 7 D = 8,5 E = ,5 1,0 1,5 2,0 2,5 ir flow low () 1,00 2,40 4,75 C 9,50 D 14,20 E -101
lternative odels 3.87 (98) anual Drain 2.67 (68) 3.72 (94) utomatic Drain 2.13 (54) 1.12 (28) P1H, PTH Filter/Regulator-Lubricator Combination Units 0
ir line equipment P1H, PTH Filter/Regulator- Lubricator Combination Units 07 Series Compact design Filter removes liquids and solid particles down to 5 µm Push to lock adjusting knob with tamper resistant
More informationEXCELON QUIKCLAMP SYSTEM Pressure relief valves V72G, V74G - G1/4... G 3/4
V7 V7 EXCELO QUIKCLMP SYSTEM Pressure relief valves V7, V7-1/... 3/ Excelon design allows in-line installation or modular installation with other Excelon products Push to lock adjusting knob with tamper
More informationB84G - Excelon Plus Modular System General purpose filter/regulator
> Port size: 3/8... 3/4 (ISO G/PTF) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Push to lock adjusting knob with built in tamper resistant
More informationALE-32. Miniature General Purpose Regulators R07, R46 (non-repairable) Air line equipment. Technical data
ir line equipment Miniature eneral Purpose egulators 7, (non-repairable) 7 Full flow gauge ports Snap action knob locks pressure setting when pushed in Standard relieving models allow reduction of outlet
More informationB84G - Excelon Plus Modular System General purpose filter/regulator
> Port size: 3/8" to 3/4" (PTF/ISO G) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Push to lock adjusting knob with built in tamper resistant
More informationIP2, IP2A and IP2D. Spirax-Monnier International Compressed Air Filter/ Regulators
Page 1 of 6 TI-P510-01 H Issue 5 IP2, IP2 and IP2D ISO 9001 Spirax-Monnier International ompressed ir Filter/ Regulators ert. No. LRQ 0963008 Description The IP range of Spirax-Monnier international compressed
More informationB74G - EXCELON Modular System General purpose filter/regulator
> Port size: /8... / (ISO G/PTF) > Excelon design allows in-line installation or modular installation with other Excelon products > Push to lock adjusting knob with optional tamper resistant accessory
More informationPrecision and Instrument Regulators 1/4" port size
Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38
More informationDescription Supply pressure Pressure range Connection Device Page max. bar bar thread
Pressure Regulators Supply pressure Pressure range onnection Device Page max. bar bar thread Maxi -Series, robust, interlockable 1 0. 1.8 / 17 G¼ - G1 R0, R1.0 made of plastic, also for liquids 1,5 0 4
More informationFilter regulator. Accessory. Description. Symbol. B With bracket With round. Port size. (Without limit indicator) Body size.
eries ow to Order opper, fluorine and silicon-free + Low particle generation il ote 1) ote 2) part no. lean series hread type Rc racket assembly ote ) ote 9) 1.0a 0.2a / -20 49-01 49-2-01 ilter regulator
More informationFilter Regulator 21 AW 30 K F 03 BG JN. Description. Without backflow function. Rc NPT 1/8 1/4 3/8 1/2 3/4
eries eries ilter Regulator ilter Regulator with ackflow unction ow to Order lean series opper, fluorine and silicon-free low particle generation ilter regulator 10 03 21 03 q w e r t y "" must always
More informationSeries ACG/ARG/AWG. Regulator with Built-in Pressure Gauge Filter Regulator with Built-in Pressure Gauge
Regulator with uilt-in ressure auge ilter Regulator with uilt-in ressure auge Series /R/W - - - R- L- W- R L W V Visibility of pressure gauge is improved in various installation places When mounting on
More informationModel AWG20 AWG30 AWG40 AWG20K AWG30K AWG40K
Modular Type ilter Regulator with uilt-in Pressure auge eries W ilter Regulator with uilt-in Pressure auge eries W ominal filtration rating ccessory W2 /8, /4 W3 /4, 3/8 W /4, 3/8, /2 racket Pages 424
More informationIP2M, IP2AM and IP2DM Monnier International Compressed Air Filter/ Regulators
L ocal regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification
More informationRegulator. Accessory. Description. Symbol. Nil. With bracket. B With round. Port size. (Without limit indicator) With set nut (For panel mount)
eries R 2- ow to Order opper, fluorine and silicon-free + Low particle generation il hread type Rc 0 R 03 2 R 03 ody size / ith bracket Round pressure ith set nut tandard specifications odel luid roof
More informationALE-40. R06 Miniature Brass Body Regulator. Water and Compressed Air Service 1/8" and 1/4" PTF Port Sizes. Air line equipment.
Air line equipment R Miniature Brass Body Regulator Water and Compressed Air Service 1/" and 1/" PTF Port Sizes Compact design, corrosion resistant construction Brass body with choice of plastic or brass
More informationR84G - Excelon Plus Modular System Pressure regulators
> Port size: 3/8... 3/4 (ISO G/PTF) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Easy to read flush mounted integrated pressure gauge as
More informationList of Contents VMA. System description 2. Individual Units Pre-Filters 3. Combinations 6. Accessories and Main spare parts 6
List of Contents VMA System description Individual Units Pre-Filters 3 Micro-Filters Activated-Charcoal-Filters 5 Combinations Accessories and Main spare parts Service Units G 1 / Pre-Filter Micro-Filter
More informationRegulator: Modular Type with Back flow Mechanism. AR30K to 60K. Body size. Port size 1/4 3/8 1/2 3/4 AR40 AR50 3/4 1/2
Regulator: Modular Type with ack flow Mechanism R3 to 6 How to Order Regulator with a built-in mechanism that ensures a quick release of the outlet air pressure (built-in check valve with back flow mechanism).
More informationPARTICULATE FILTER/REGULATOR
PRTICULTE FILTER/REGULTOR High flow with a wide range of adjustable output pressure ranges Optional low profile integrated gauge, Optional extended temperature range of -40 C to +80 C Threaded ports allow
More informationHow to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø
Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note
More informationALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa 0. MPa.0 MPa (Note
More informationFILTER REGULATOR. We produce with artistic attitude.
FILTER REGULTOR We produce with artistic attitude. DURY from Germany is expert in fluid control; the products are mainly for control and measurement of various gases, liquid pressure and flow, including
More informationALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa Max. operating pressure
More informationHow to Order. Rc NPT 1/8 1/4 3/8 1/2
AWM 3 AWD 3 Mist Separator Regulator AWM2 to AWM4 Micro Mist Separator Regulator AWD2 to AWD4 3 E 3 E How to Order Mist Separator Regulator 1 2 Micro Mist Separator Regulator The AWM series is made up
More informationModular F.R.L. Units. New. New. Series AC 46% Better visibility and environmental resistance. Energy saving regulator
Modular F.R.L. Units New RoHS etter visibility and environmental resistance Double layer design The bowl is covered with a transparent bowl guard! The inside is visible from 36. The bowl is completely
More informationCompressed Air Cleaning Filter Series
Compressed ir Cleaning Filter Series M /FF Series For Water Droplet, Solid/Oil Separation and Deodorization Modular connection, Space-saving design, Labor-saving in piping! Uses the same spacer as the
More informationAir preparation units
Overview Description Page Characteristics Dimensions Order instructions Type overview unit three-piece 44, 45, 48 52 6 unit two piece 44, 45, 48 52 6 Filter-regulator 44, 45, 48 53 6 Filter-water-separator
More informationRegulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K
Modular Type Regulator Series R Regulator Series R Model R M5 x.8 ccessory R2 /8, /4 R /4, 3/8 R3 /4, 3/8 R4 /4, 3/8, /2 Pages 36 through 4 Regulator with back flow mechanism Series RK R4-6 R5 R6 R2K RK
More informationRegulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K
Modular Type Regulator Series R Regulator Series R Model R M5 x.8 ccessory R2 /8, /4 R /4, 3/8 R3 /4, 3/8 R4 /4, 3/8, /2 Pages 36 through 4 Regulator with back flow mechanism Series RK R4-6 R5 R6 R2K RK,
More informationBL68 - Olympian Plus, plug-in system Filter/regulators and lubricators
>> Port size: 3/4... /2 (ISO G/ PTF) >> Complete air processing units pre-assembled, ready to install Technical features Medium: Compressed air only Maximum operating pressure: 7 bar (246 psi) Pressure
More informationF68G - Olympian Plus plug-in system General purpose filter
> > Port size: /... / (ISO G/ PTF) > > Olympian Plus plug in system > > Large filter element area provides minimum pressure drop > > Effective liquid removal and positive solid particle filtration Technical
More informationR18 General purpose pressure regulators
> > Port size: / & (ISO G, PTF) > > Can be installed at any point in the compressed air system without regard to accessibility pilot regulator can be installed in the most convenient location > > Accurate
More informationFILTER, REGULATOR AND FILTER/REGULATOR Stainless Steel 316L Compact 1/4, High Flow 1/4-1/2
FILTER, REGULATOR AND FILTER/REGULATOR Stainless Steel L Compact /, High Flow / - / Air service equipment Series FEATURES Stainless Steel filter, regulator and filter regulator intended for corrosive environment
More informationFilter-Regulator-Lubricator
Filter-Regulator-Lubricator 1/2" NPT Inlet/Outlet Ports PD16.19 July, 2016 Machine Parts & Operating Instructions Save This Document and Educate All Personnel WARNING Always follow the safety instructions
More informationAir service units series K G1/8, G1/4
Air service units series K Series FK Filter 12.011 Series RK Pressure regulator 12.012 Series FRK Filter/regulator 12.013 Series OK Lubricator 12.014 Series FROK Two piece air service unit 12.015 Series
More informationALF400 to 900, ALT-5/-9
Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Auto feed lube 00 00-0 00 00 00 900 - --IS- -9 AIR : OIL : Fluid Proof pressure Air. MPa 0. MPa.0 MPa (Note ) Operating pressure differential
More informationSeries K Air service units G 1/8, G 1/4
Air service units G /8, G /4 Series FK Filter, G /8 G /4.02 Series RK Pressure regulator, G /8 G /4.04 Series FRK Filter/regulator, G /8 G /4.06 Series OK Lubricator, G /8 G /4.08 Series FROK Two piece
More informationMPC1M, MPC2M and MPC2AM Monnier High Efficiency Compressed Air Filter / Regulators
5043150 /2 IM-P504-08 CH Issue 2 MPC1M, MPC2M and MPC2AM Monnier High Efficiency Compressed Air Filter / Regulators Installation and Maintenance Instructions 1. Safety information 2. General product information
More informationPrecision Pressure Regulators
hapter - Pressure Regulators Pressure range onnection thread Device Page 3 mm, high precision 0.0 2 / 8 bar G 1 8 RI.02 highly sensitive, max. 3 bar supply pressure 0.002 0.12 / 31 bar ¼"NPT R40.03 without
More informationFilter-Regulator-Lubricator
Models: 10671-1/2" NPT Filter 10673-1/2" NPT Regulator 10675-1/2" NPT Lubricator 10677-1/2" NPT Filter-Regulator 10679-1/2" NPT Regulator-Lubricator 10681-1/2" NPT Filter-Regulator-Lubricator Parts Page
More informationAir-service devices, Series MU1
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Air-service devices, Series MU1 Technical data Pressure regulator valve, MU1, G 1 Technical Data Type Operating
More information1200 Series Pressure Regulators
SEE MORE AT SORInc.com Request Quote 1200 Series Pressure SOR pressure regulators are durable, high performing instruments that are designed to provide reliable control of pressure in various stages of
More informationType 4708 Supply Pressure Regulator
Type 478 Pressure Regulator Application pressure regulators used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to. bar ( to 4 psi). to bar (8 to 9 psi)
More informationModular Air Combination Units
...... 12-25 NAC1 ~ 6 series.................................. 12-16 Filter + Regulator + Lubricator NAC11 ~ 41 series.................................. 17-18 Filter/Regulator + Lubricator NAC12 ~ 62 series..................................
More informationAIR TREATMENT FRL Series FUTURA. The New FUTURA Series offers many advantages:
IR TRETMENT FRL Series FUTUR The Futura series: the future is built in! Innovative, compact and highly efficient, the Futura series is an absolute technical highlight. The modular structure of the patented
More informationFilter pressure regulator, Series AS3-FRE G 3/8 - G 1/2 filter porosity: 5 µm lockable for padlocks with pressure gauge suitable for ATEX
Filter regulator, Series AS3-FRE G 3/8 - G 1/2 filter porosity: 5 µm lockable for padlocks with gauge suitable for ATEX 1 00119372 Version Parts Mounting orientation Working min./max. Medium Medium temperature
More information1 8 A N D 2 8 S E R I E S
8 A N D 8 S E R I E S C O M P A C T A N D S T A N D A R D M O D U L A R A I R P R E P A R A T I O N S Y S T E M S C O R P O R AT I O N L u b ri c at o rss The L8 Compact and L8 Standard lubricators feature
More informationType 4708 Supply Pressure Regulator
Type 478 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to.6 bar ( to 4 psi) or. to 6 bar (8 to
More informationList of Contents vma. Compressed Air Conditioning 2. System description 2. Individual Units Pre-Filters 3. Combinations 6
Úprava stlačeného vzduchu EWO VMA List of Contents System description Individual Units Pre-Filters 3 Micro-Filters 4 Activated-Charcoal-Filters 5 Combinations 6 Accessories and Main spare parts 6 Service
More informationAIR TREATMENT H Z E 0. Air Treatment Units CHARACTERISTICS CODIFICATION KEY. Filter. Ambient temperature Fluid Working pressure Max pressure Size Body
NEW - HZE Air Treatment Units CHARACTERISTICS Ambient temperature Working pressure Max pressure Body Knob Ring nut Bowl Bowl guard Filter element Seals Springs Diaphragm CODIFICATION KEY H Z E B 8 G +6
More informationE 212 E 222 Tank top mounting Connection up to G1¼ Nominal flow rate up to 220 l/min
Return Filters E E Tank top mounting Connection up to G¼ ominal flow rate up to l/min Description pplication In the return line circuits of hydraulic systems. Performance features Protection against wear:
More informationAir service units series Y G1/4 to G1
Air service units series Y Series FY Filter, 12.071 Series RY+ RYP Pressure regulator, 12.076 Series FRY Filter/regulator, 12.080 Series OY Lubricator, 12.083 Series FROY Filter, Regulator, Lubricator
More informationRelated products. Components for air preparation and pressure adjustment / F.R.L. unit. Pressure gauge. Indidcator
Related products Pressure gauge / indicator omponents preparation and pressure adjustment / unit Refrigerating ir uto. drain ir Pressure gauge ONTENTS Pressure gauge assembly (G401-W) 660 With safety mark
More informationType Pressure Regulator. for increased air capacity. Fig. 1: Type Pressure Regulator. Mounting and Operating Instructions EB EN
Type 4708-45 Pressure Regulator for increased air capacity Fig. 1: Type 4708-45 Pressure Regulator Mounting and Operating Instructions EB 8546-1 EN Edition March 2010 Definition of the signal words used
More informationAirpel -FFR Overview PUB# FFRP-04R. Airpot, Airpel, and Anti-Stiction are registered trademarks of Airpot Corporation
Airpel -FFR Overview Airpot s pneumatic accessories and filter/regulator systems offer engineers, designers and manufacturing professionals the precise control, optimal air quality and properly sized components
More informationAuto Feed Lube, Auto Feed Tank ALF400 to 900, ALT-5/-9
Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Fluid Proof pressure Operating pressure differential range (Difference between tank pressure and line pressure) Vibration resistance
More informationDirect Operated Precision Regulator Modular Style. Standard Specifications
1 Direct Operated Precision Regulator Modular Style Series P3 Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8) 258-92-www.stevenengineering.com
More informationDiscontinued. Powers Controls. Technical Instructions Document No P25 RV Rev. 1, May, RV 201 Pressure Reducing Valves.
Powers Controls RV 201 Pressure Reducing Valves Description Features Product Numbers Dual Pressure PRV Technical Instructions Document No. 155-049P25 RV 201-1 Single Pressure PRV The RV 201 Pressure Reducing
More informationDescription Pressure range Connection thread Device Page
Pressure Regulator Pressure range onnection thread Device Page max. 22 l/min miniature -850 0 mbar 1 8 NPT V800.02 max. 22 l/min miniature -850 0 mbar 10-32 and flange V900.02 max. 0 l/min precise -1 +0,.4
More informationMaximum 0.85 MPa pressure setting Long-life, high flow perfect for balancer applications
Outstanding performance in extremely low pressure and low pressure ranges from 0.003 to. Realizing high performance, energy saving, and compact size. Realize precise pressure control in a pressure range
More informationHIGH-PRESSURE RELIEF VALVES
HIGH-PRESSURE RELIEF VALVES H-9HP SERIES FEATURES n St.St. 316 Construction n MAWT up to 6 psi n Set Pressure from 5 psig to 6 psig ( 3.5 to 4 bar) n Identifying colored springs for each pressure range
More information1 0,1 0,1-70 0, , , , Cylinder bore <
Working medium, air quality Working medium: Dry, filtered compressed air to ISO 8573-1 class 3.4.3. Recommended air quality for valves For best possible service life and trouble free operation, ISO 8573-1
More informationMF2M Monnier Miniature Compressed Air Filter
5040050 / 2 IM-P504-02 CH Issue 2 MF2M Monnier Miniature Compressed Air Filter Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation and commissioning
More informationPressure regulator for water
Pressure regulator for water rass version with VGW and international drinking water approvals Stainless steel version with VGW approval Compact plastic version Manometer port at pressure output The water
More informationMembrane dryers. Series airfit dry G1/2. with/without patented purge air regulation. Overview Description. Characteristics Dimensions
Overview Description Membrane fitting the airfit comfort series Page Characteristics Dimensions 146 10 11 13 14 Order instructions Type overview Membrane A4P006E-October 2007 14 Membrane Characteristics
More informationPilot Check Valve: Metal Body Type
INFORMATION Pilot Check Valve: Metal Body Type The use of a metal body improves strength and environmental resistance. Temporary intermediate stops are possible. *1 *1 Precise intermediate stops are not
More informationNew Product. Air Consumption 70% Down. Precision Regulator Air Saving Type. RPE Series PRECISION REGULATOR RPE SERIES CC-1072A
Air Consumption 70% Down New Product Precision Regulator Air Saving Type RPE Series PRECISION REGULATOR RPE SERIES Large Air Saving CC-1072A Air Consumption 70% Down. New Type Eco-friendly Precision Regulator
More informationUser and Installation Manual
COMBUSTION ANALYSERS SERVOTOUGH Fluegas(2700) 2730C Utilities Unit User and Installation Manual Part Number: 02730001C Revision: 1 Language: UK English This page intentionally blank CONTENTS LIST CONTENTS
More informationOperating Manual. R280 Pressure regulator made of brass. 1. Intended Use
Pressure regulator made of brass Operating Manual 1. Intended Use Line or outlet pressure regulators- /reducer for Air, gases and liquids which is designed to effect reduction to a downstream pressure
More informationIP2M, IP2AM and IP2DM Monnier International Compressed Air Filter/ Regulators
5043250/2 IM-P504-18 CH Issue 2 IP2M, IP2AM and IP2DM Monnier International Compressed Air Filter/ Regulators Installation and Maintenance Instructions 1. Safety information 2. General product information
More informationE 212 E 222 Tank top mounting Connection up to G1¼ / -20 SAE Nominal flow rate up to 220 l/min / 58.1 gpm
Return Filters E E Tank top mounting Connection up to G¼ / - SE up to l/min / 8. gpm Description pplication In the return line circuits of hydraulic systems. erformance features rotection against wear:
More informationISO Sub-bases. Port sizes G 1 /4 - G1 and 1 /4NPT - 1 /2NPT. Sub-bases tovdma specification, for ISO sizes #1, #2, #3 and #4
Port sizes 1 / - 1 and 1 /NPT - 1 /NPT Sub-bases tovd 3 specification, for ISO sizes #1, #, #3 and # Universal bases for ISO sizes #1 and #, side and bottom ported Technical Data edium: See individual
More informationE 094 E 103 E 143 Tank top mounting Connection up to G1 / -16 SAE Nominal flow rate up to 135 l/min / 35.7 gpm
Return Filters E 9 E E Tank top mounting Connection up to G / -6 SAE Nominal flow rate up to 5 l/min / 5.7 gpm Description Application In the return line circuits of hydraulic systems. Performance features
More informationMounting and Operating Instructions EB 8546 EN. Supply Pressure Regulator Type Fig. 1 Supply pressure regulators
Supply Pressure Regulator Type 4708 Type 4708-5352 on Type 3730 Positioner Type 4708-52 with filter receptacle Type 4708-6252 on Type 3372 ctuator Fig. Supply pressure regulators Mounting and Operating
More informationMembrane modules for nitrogen and oxygen generator systems. Technology Overview ENGINEERING YOUR SUCCESS.
Membrane modules for nitrogen and oxygen generator systems Technology Overview ENGINEERING YOUR SUCCESS. Parker modules the heart of OEM tailor-made nitrogen generators OEM (Original Equipment Manufacturer)
More informationOPERATION MANUAL NTF-15
OPERATION MANUAL NTF-15 Nitrogen Tire Filling Valve Stem Caps (Qty=200) Order P/N 436075 RTI Technologies, Inc 10 Innovation Drive York, PA 17402 800-468-2321 www.rtitech.com 035-81235-00 (Rev B) TABLE
More informationFilter / Regulator Numbering System
atalog 9M-TK-19- Filter / Regulator Numbering System Filter / Regulator Numbering System Unit Thread Pipe Preset / Function Family Type Size Options Options Options Options Pressure Limited 2 Unit Function
More informationIX1 Spirax-Monnier International Compressed Air Filter Installation and Maintenance Instructions
0575050/2 IM-P057-04 CH Issue 2 IX1 Spirax-Monnier International Compressed Air Filter Installation and Maintenance Instructions 1 Safety information 2 General product information 3 Installation and commissioning
More informationSeries MX pressure regulators 3/
CATALOGUE > Release 8.8 > Series MX regulators Series MX pressure regulators MX2 ports: G/8, G1/2, G/4 - MX ports: G/4, G1 Manifold ports: G1/2 (MX2 only) Modular - Available with built-in pressure gauges
More informationOPERATION MANUAL NTF-60 Plus
OPERATION MANUAL NTF-60 Plus Nitrogen Tire Filling Valve Stem Caps (Qty=200) Order P/N 436075 RTI Technologies, Inc 10 Innovation Drive York, PA 17402 800-468-2321 www.rtitech.com 035-81264-00 (Rev A)
More informationSeries SFD. Clean Air Filter. Variations. Made to Order. Type. Cartridge (replaceable element) Disposable (non-replaceable element) Up to 100
Clean Air Filter Variations SFD SFD SFD SFD Made to Order Type Disposable (non-replaceable element) Cartridge (replaceable element) Flow rate L/min (ANR) (at inlet pressure.7 MPa) Up to 6 Up to 8 Up to
More informationPressure-Relief Cartridge Valve, Size 4
Pressure-Relief Cartridge Valve, Size 4 Q max = 30 l/min, p max = 420 bar Seated design, direct acting, with mechanical operation Compact construction for cavity type AL 3/4-16 UNF High flow rates 7 pressure
More informationessentialsguide World leading airline solutions Air preparation When you need it fast. Issue contents 03 FRLs with an added component.
Air preparation Guide Issue 1 2011 contents 03 FRLs with an added component. 06 No tools required. The Excelon Pro FRL. 08 Tried, tested, top quality accessories. World leading airline solutions 10 The
More informationE 328 E 498 Tank top mounting Connection up to G1½ / -24 SAE and SAE 2 Nominal flow rate up to 600 l/min / gpm
Return-Suction Filters E 8 E 98 Tank top mounting Connection up to G½ / - SE and SE Nominal flow rate up to 6 l/min / 8. gpm Description pplication For operation in units with hydrostatic drives, when
More informationModular Type Regulators
Modular Type Regulators Series AR AC Regulator Series AR Port size Options AFARAL, 1/4 Bracket AFAR AWAL AR4-A, 1/2 Round type pressure gauge With set nut (for panel mount) AFAFMAR P.45 to 5 AR4-6-A ot
More informationE 328 E 498 Tank top mounting Connection up to G1½ and SAE 2 Nominal flow rate up to 600 l/min
Return-Suction Filters E 8 E 98 Tank top mounting Connection up to G½ and SE Nominal flow rate up to 6 l/min Description pplication For operation in units with hydrostatic drives, when the return flow
More informationJSHM Series Hand Metering Valves
Hand metering valve for precise manual control of iopharm and Pharmaceutical gas or liquids The JSHM Series allows precision manual adjustment of pharmaceutical liquid and gas flows. These valves are most
More informationComponents for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly.
Components preparation and pressure adjustment ABP Overview ABP is a component that enables boosting by s only up to twice primary pressure (.0MPa max.) in combination with using air tank but not using
More informationRelated Products: Auto Drain Valve. Model/Specifications. Model
Related Products: Auto Drain Valve /600 Drainage is automatically discharged in a reliable manner, without requiring human operators. Highly resistant to dust and corrosion, operates reliably, and a bowl
More informationPrep-Air II. Miniature FRL Series. Catalogue: PDE2591TCUK-ca Edition: May 2007
Prep-ir II atalogue: P259TUK-ca dition: May 27 P259TUK-ca Important! efore carrying out any service work, ensure that the valve and manifold have been vented. Remove the primary supply air hose to ensure
More informationINDUSTRIAL PNEUMATICS - air treatment units. FIL filter
Due to its metal construction, the entire range of NEW DEAL elements is resistant to heavy duty working conditions. Designed for high pressure application (up to 18 bar). FIL filter Degree of filtration:
More informationSeries 10-IRV10/20. Vacuum Regulator C08 IRV C08 IRV 20 A. How to Order. Standard connections. Single sided connections. Accessory w Nil G ZN ZP ZA ZB
Vacuum egulator eries -IV/ How to Order tandard connections IV C08 traight Clean series ody size Max. flow 140 L/min (N) Max. flow 240 L/min (N) L Fittings traight Connection tubing O.D. ymbol ubing O.D.
More informationAMG. Model Note) Rated flow (l/min (ANR)) Port size Mass (kg) 1 8, , 3 8. Specifications Fluid. Element life
Water Separator Series AMG Can remove water droplets in compressed air. Use this product in cases where water must be avoided, but not so dry as when an air dryer is used. Through the adoption of an element
More informationGas Pressure Regulator HON 502
Gas Pressure Regulator HON 502 Product information serving the gas industry worldwide Gas Pressure regulator HON 502 Application, Characteristics, Technical Data Application for offtake stations in gas
More informationMounting and Operating Instructions EB EN. Type Supply Pressure Regulator. with increased air capacity
Type 4708-45 Supply Pressure Regulator with increased air capacity Translation of original instructions Mounting and Operating Instructions EB 8546-1 EN Edition March 2016 Note on these mounting and operating
More informationPressure Regulators. Operating Instructions. Instrumentation
Pressure Regulators Operating Instructions FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THIS PRODUCT CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from the
More informationCompact Regulator. ARX20 Series. 2.0 MPa compatible, piston type compact regulator ARJ
Compact Regulator 2 Series 2. MPa compatible, piston type compact regulator V SR X AP1 Compatible with inlet supply pressure of 2. MPa Employs a knob shape for easy operation Compact type (face to face
More informationInstallation, Operation, and Maintenance Manual Parker Balston Model N2-04 Nitrogen Generator
Installation, Operation, and Maintenance Manual Parker Balston Figure 1 - N2-04 Nitrogen Generator These instructions must be thoroughly read and understood before installing and operating this product.
More informationF.R.L. Units Precautions 1 Be sure to read this before handling.
Precautions 1 1. Confirm the specifications. Products represented in this catalog are designed only for use in compressed air systems (including vacuum). Do not operate at pressures or temperatures, etc.,
More information