Title: Plant and Equipment Risk Management Form Issue Date: Review Date: Page Number: 1 of 11

Size: px
Start display at page:

Download "Title: Plant and Equipment Risk Management Form Issue Date: Review Date: Page Number: 1 of 11"

Transcription

1 Issue Date: Review Date: Page Number: 1 of Hazard Management Details General Plant/Equipment Item: WOOD LATHE Make/Model No.: Serial No.: School: Work Location: Name of Person(s) Conducting Activity: Date Conducted: Description of Use: A wood lathe is a specialised piece of plant equipment used to machine wood by removing material from a rotating work piece via the movement of various cutting pieces (i.e. tool bits, drill bits). Summary of Key Risks: (refer to appropriate subsections) Entanglement Impact and Cutting Electricity Slips/trips/falls Other (dust)

2 Issue Date: Review Date: Page Number: 2 of 11

3 Issue Date: Review Date: Page Number: 3 of Documentation Relevant Legislation/Standards Y / N Comments Is plant required to be registered? Is a user license required? Key reference material? AS 4024 Safety of machinery - Materials cutting - Milling machines (including boring machines) - Safety requirements AS/NZS 3760 In service safety inspection and testing of electrical equipment AS 4024 Safeguarding of machinery Plant Documentation Y / N Comments Are operator s manuals accessible? Is this a restricted use item? Does this item require safe use documents/test? 3. Hazard Identification

4 Issue Date: Review Date: Page Number: 4 of 11 ENTANGLEMENT Can anyone s hair, clothing, gloves, cleaning brushes, tools, rags or other materials become entangled with moving parts of the plant or materials? Moderate Possible High Long hair, loose clothing, rags, cleaning brushes and jewellery could become entangled in the moving parts of the work piece and/or lathe. Make sure hair, loose clothing, rags and jewellery is kept clear of moving parts when in use. Aprons can be used to restrict loose clothing. Hair ties/hair nets can be used to secure long hair. Make sure jewellery and accessories (e.g. bracelets) are not worn when operating equipment. Impact and Cutting Injuries Can anyone be crushed/cut/struck etc. due to Material falling off the plant? Uncontrolled/unexpected movement of plant/load? Lack of capacity to slow, stop or immobilize plant? The plant tipping or rolling over? Parts of the plant disintegrating or collapsing? Moderate Rare Moderate Contact with moving parts during testing, inspection, operation, maintenance, cleaning or repair? Being thrown off or under the plant? Moderate Possible High The exposed moving parts present a risk to an operator s hands and body parts. Make sure operator hands and body parts are kept clear of moving parts during operation and maintenance. Make sure work pieces are appropriately secured prior to operation and key is removed from chuck. Make sure that the operator has been trained in safe work practices and appropriate PPE (e.g. eye protection) is worn whilst operating

5 Issue Date: Review Date: Page Number: 5 of 11 Contact with sharp or flying objects? (e.g. work pieces being ejected) The mobility of the plant? Moderate Possible High equipment. Inappropriate parts and accessories being used? Other

6 Issue Date: Review Date: Page Number: 6 of 11 SHEARING Can anyone s body parts be sheared between two parts of plant, or between a part of the plant and a work piece or structure? PRESSURISED CONTENT Can anyone come into contact with fluids or gases under high pressure, due to plant failure or misuse of the plant? ELECTRICITY Can anyone be injured or burnt due to: Live electrical conductors? (e.g. exposed wires) Working in close proximity to electrical conductors? Access to electricity? Damaged or frayed electrical cords would pose an electrical hazard. Electric shock is considered unlikely if appropriate maintenance is undertaken. Operator to check for damaged electrical cords prior to use. Make sure equipment is serviced on a regular basis, tested & tagged and appropriate isolation procedures (i.e. lock out tags) are in place. Damaged or poorly maintained electrical leads, cables or switches? Water near electrical equipment? Lack of isolation procedures? Other Major Unlikely High

7 Issue Date: Review Date: Page Number: 7 of 11 ERGONOMICS Can anyone be injured due to: Poorly designed workstation? Repetitive body movement? Constrained body posture or the need for excessive effort? Design deficiency causing psychological stress? Inadequate or poorly placed lighting? Does the plant impact on the surrounding workplace and create potential hazards? (Consider safe access and egress from plant, workflow and design of the workplace) Is the location of the plant inappropriate? (Consider potential affects due to environmental conditions and terrain) Other

8 Issue Date: Review Date: Page Number: 8 of 11 RADIATION Can anyone using the plant, or in the vicinity of the Plant suffer injury or illness due to exposure to radiation in the form of any of the following: infra-red radiation ultra violet light microwaves NOISE Can anyone using the plant, or in the vicinity of the plant, suffer injury due to exposure to noise? VIBRATION Can anyone be injured or suffer ill-health from exposure to vibration? FRICTION Can anyone be burnt due to contact with moving parts, materials or surfaces of the plant? SUFFOCATION Can anyone be suffocated due to lack of oxygen, or atmospheric contamination? CONDITION Is a hazard likely due to the age and condition of the plant? (Consider how hard the machine has been worked, and whether it is used constantly or rarely). Can anyone be injured as a result of the plant not serviced appropriately and/or maintained in line with manufacturer s recommendations?

9 Issue Date: Review Date: Page Number: 9 of 11 SLIPS/TRIPS/FALLS Can anyone using the plant, or in the vicinity of the plant, slip, trip or fall due to: Uneven, slippery or steep work surfaces? Poor housekeeping, e.g. spillage in the vicinity? Obstacles being placed in the vicinity of the plant? Inappropriate or poorly maintained floor or walking surfaces (i.e. lack of a slip-resistant surface, unprotected holes, penetrations or gaps?) If operating or maintaining plant at height can anyone slip, trip or fall due to: Use of work platforms, stairs or ladders? Minor Possible Moderate Minor Possible Moderate Poor housekeeping allowing the build up of waste materials or failure to immediately clean up spills could result in a slip hazard. Inappropriate placement of objects (e.g. spare material, electric cords, bags etc) in the immediate vicinity of the equipment may result in a trip hazard. Make sure appropriate cleaning & housekeeping standards are maintained at all times to minimise the risk of a slip/trip/falls hazard. Lack of guardrails or other suitable edge protection? Other?

10 Issue Date: Review Date: Page Number: 10 of 11 FIRE AND EXPLOSION Can anyone be injured by fire? Can anyone be injured by explosion of gases, vapours, liquids, dusts, or other substances? TEMPERATURE/MOISTURE Can anyone come into contact with objects at high or low temperatures? Can anyone suffer ill-health due to exposure to high or low temperatures? Can anyone be injured or suffer ill-health due to exposure to moisture? OTHER Can anyone be injured or suffer ill-health from exposure to: Chemicals? Toxic gases or vapours? Dust generated from the work process may be hazardous to health. Make sure appropriate control measures are implemented (e.g. local exhaust system, face masks, good housekeeping practices etc). Fumes/Dusts? Moderate Unlikely Moderate Other? (please specify) 4. Risk Assessment Signoff Authorised By: Signature: Date:

11 Issue Date: Review Date: Page Number: 11 of 11

Print this activity then complete it and keep it as evidence in your folder, or portfolio.

Print this activity then complete it and keep it as evidence in your folder, or portfolio. Workplace hazards Workplace Learning and Assessment Activity Workplace Learning and Assessment Activity Print this activity then complete it and keep it as evidence in your folder, or portfolio. Hazard

More information

Plant hazard checklist

Plant hazard checklist 110797 VWA PlantHazard Cvr 21/11/05 10:28 AM Page 1 Plant hazard checklist Some of the questions you should ask to help identify hazards arising from plant WorkSafe Victoria is a division of the Victorian

More information

SAFETY MANAGEMENT SYSTEM

SAFETY MANAGEMENT SYSTEM Equipment Location: Hazard Entanglement Hired From All Master Hire Stores Can anyone s hair, clothing, gloves, necktie, jewellery, cleaning brushes, rags or other materials become entangled with moving

More information

SAFETY MANAGEMENT SYSTEM

SAFETY MANAGEMENT SYSTEM Equipment Location: Hazard Hired From All Master Hire Stores Entanglement Can anyone s hair, clothing, gloves, necktie, jewellery, cleaning brushes, rags or other materials become entangled with moving

More information

Safety Audit/Risk Assessment

Safety Audit/Risk Assessment Safety Audit/Risk Assessment Of Airrex HSC2500 Large Air Conditioner For Kennards Hire Cnr. Old Windsor Rd. And Powers Rd. Seven Hills. Jim Macbeth. ABN 36 895 254 895 3 Shade Place, O.H. & S. Consultant.

More information

Kennards Hire Building I, 22 Powers Road Seven Hills. NSW 2147

Kennards Hire Building I, 22 Powers Road Seven Hills. NSW 2147 Safety Audit / Risk Assessment Of Hino 2 Tonne Dutro Tipper Kennards Hire Building I, 22 Powers Road Seven Hills. NSW 2147 Mark Zimmer Unit 3, 16 Herbert St, Equipment manager Artarmon. NSW 2064 Ph: (02)

More information

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT PLAT HAZARD AD EQUIPMET RISK ASSESSMET Plant Identification : HAULOTTE OPTIMUM 8.1 Potential Hazard Entanglement Can anything become entangled in moving parts? Crushing/Striking Can anyone be crushed or

More information

SAFETY MANAGEMENT SYSTEM

SAFETY MANAGEMENT SYSTEM Equipment Location: Hazard Hired From All Master Hire Stores Entanglement Can anyone s hair, clothing, gloves, necktie, jewellery, cleaning brushes, rags or other materials become entangled with moving

More information

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT PLAT HAZARD AD EQUIPMET RISK ASSESSMET Plant Identification : HAULOTTE STAR 10 Potential Hazard Entanglement Can anything become entangled in moving parts? Crushing/Striking Can anyone be crushed or struck

More information

SAFETY MANAGEMENT SYSTEM

SAFETY MANAGEMENT SYSTEM Equipment Location: Hazard Hired From All Master Hire Stores Entanglement Can anyone s hair, clothing, gloves, necktie, jewellery, cleaning brushes, rags or other materials become entangled with moving

More information

SAFETY MANAGEMENT SYSTEM

SAFETY MANAGEMENT SYSTEM Equipment Location: Hazard Hired From All Master Hire Stores Entanglement Can anyone s hair, clothing, gloves, necktie, jewellery, cleaning brushes, rags or other materials become entangled with moving

More information

Product Risk Assessment

Product Risk Assessment Product Risk Assessment Flextool (Aust.) Pty Ltd, Brunswick, Vic. Product Description Artizan ub Floor Grinder Model Number ART-UB Risk Assessment Date 19-Jun-08 Product Risk Assessment Number 0010 PRA

More information

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT Plant Identification : HAULOTTE LIGHT BOOMS 3522A (HTA 13P); 4527A (HTA 16P); 5533A (HTA 19P) and 3632T (HTT 13) Potential Hazard Entanglement Can anything become entangled in moving parts? Crushing/Striking

More information

PLANT RISK ASSESSMENT

PLANT RISK ASSESSMENT PLANT RISK ASSESSMENT Forktruck: Year of Manufacture Make: Model: Serial : TCM FD30T3 Attachment: Name: Mfg: Model : Owner: Business/Organisation: Address: This header page and the following 5 pages have

More information

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT Plant Identification : HAULOTTE HA16RTJ Potential Hazard Entanglement Can anything become entangled in moving parts? Crushing/Striking Can anyone be crushed or struck by moving objects due to: Risk es

More information

Material Lift Risk and Hazard Management

Material Lift Risk and Hazard Management Material Lift Risk and Hazard Management Models GH 3.8 Safe 136 kg Maximum 3.80 m GH5.6 Working 113 kg Lifting 5.60 m LL Load (kg) 91 kg Height (m) 1.70 m GL-4 227 kg 1.80 m GL-8 181 kg 3.06 m GL-10 159

More information

PLANT/EQUIPMENT/ASSET HAZARD REPORT

PLANT/EQUIPMENT/ASSET HAZARD REPORT Asset Description: EL-08001-011 : Harrison 550 CNC Lathe Large Sale Type For what use is this asset being sold? Re-Use þ Spare Parts Scrap Note 1: Assets are sold only for the use indicated. Any other

More information

Risk and Hazard Management

Risk and Hazard Management Risk and Hazard Management Models S40 Safe 227 Maximum 12.2 Maximum 14.2 S45 Working 227 Platform 13.7 Working 15.7 S60 Load (kg) 227 Drive 18.3 Height (m) 20.3 S65 227 Height (m) 19.8 21.8 S65 TRAX 227

More information

UNCONTROLLED IF PRINTED. Issued with the authority of the Chief Commissioner and General Manager of Scouts Australia NSW

UNCONTROLLED IF PRINTED. Issued with the authority of the Chief Commissioner and General Manager of Scouts Australia NSW PROCEDURE Plant and equipment safety Issued with the authority of the Chief Commissioner and General Manager of Chief Commissioner signature Chief Executive Officer signature Sponsor Head of Risk Document

More information

Manually Propelled Risk and Hazard Management

Manually Propelled Risk and Hazard Management Manually Propelled Risk and Hazard Management Models AWP-20S Safe 159 Maximum N/A Maximum 6.12 AWP-25S Working 159 Platform N/A Working 7.57 AWP-30S Load (kg) 159 Height (m) N/A Height (m) 9.00 AWP-36S

More information

Risk and Hazard Management

Risk and Hazard Management Risk and Hazard Management Models GS1532 Safe 272 Maximum 4.6 Maximum 6.6 GS1930 Working 227 Platform 5.8 Working 7.8 GS1932 Load (kg) 227 Drive 5.8 Height (m) 7.8 GS2032 363 Height (m) 6.1 8.1 GS2632

More information

University College Dublin Machinery/Equipment Risk Assessment Template

University College Dublin Machinery/Equipment Risk Assessment Template 1. General Information Name of Person(s) carrying out assessment and their position Principal Investigator / Supervisor / Head of School or Unit (Person responsible for ensuring safety) Date of assessment

More information

Risk and Hazard Management

Risk and Hazard Management Risk and Hazard Management Models TZ34 Safe 200 Maximum 12.4 Maximum 10.4 TZ50 Working 200 Platform 15 Working 17 Z30/20NRJ Load (kg) 227 Drive 8.9 Height (m) 10.9 Z33/18 200 Height (m) 10 12 Z34/22 227

More information

Risk and Hazard Management

Risk and Hazard Management Risk and Hazard Management Models S40/45 Safe 227 Maximum 12.2/13.72 Maximum 14.2/15.72 S60/65 Working 227/499 Platform 18.34/19.8 Working 20.34/21.8 S80/85 Load (kg) 227/454 Drive 24.2/25.7 Height (m)

More information

Runabout Risk and Hazard Management

Runabout Risk and Hazard Management Runabout Risk and Hazard Management Models GR-15 Safe 227 Maximum 4.47 Maximum 6.47 GR-20 Working 159 Platform 6.07 Working 8.07 GRC-12 Load (kg) 227 Drive 3.66 Height (m) 5.66 QS-15 227 Height (m) 4.47

More information

Static, Hazard & Risk Assessment of Mobile Plant

Static, Hazard & Risk Assessment of Mobile Plant Static, Hazard & Risk Assessment of Mobile Plant Company Name ELITE ROADS Make / Model SAKAI TS160-2 Meter Reading: 477 Multi-Wheel Roller Plant Registration or ID. OU-047 Assessed by GREG CORNELL 03 9763

More information

Plant Hazard Identification and Risk Assessment

Plant Hazard Identification and Risk Assessment Plant information Plant item: Water Truck Plant identification details (asset/plant no.): Project: Competency required to operate the plant: MR/HR Licence / VOC List all legislation, codes of practice

More information

PLANT/EQUIPMENT/ASSET HAZARD REPORT

PLANT/EQUIPMENT/ASSET HAZARD REPORT Asset Description: EL-09100-060 : Gantry hoist system Sale Type For what use is this asset being sold? Re-Use Spare Parts Scrap Note 1: Assets are sold only for the use indicated. Any other use is at the

More information

PLANT/EQUIPMENT/ASSET HAZARD REPORT

PLANT/EQUIPMENT/ASSET HAZARD REPORT Asset Description: EL-0001-003 - Overhead Transfer System and EMS. Sale Type For what use is this asset being sold? Re-Use Spare Parts Scrap Note 1: Assets are sold only for the use indicated. Any other

More information

Plant Hazard Identification and Risk Assessment

Plant Hazard Identification and Risk Assessment Plant information Plant item: Drott Plant identification details (asset/plant no.): Project: Competency required to operate the plant: LS Ticket / VOC List all legislation, codes of practice and Australian

More information

EHS Workplace Inspection Checklist (Ref. SOP QMS-080; EHS-010)

EHS Workplace Inspection Checklist (Ref. SOP QMS-080; EHS-010) (Ref. SOP QMS-080; EHS-010) Form-445 Inspected by: Date of inspection Date of Report Report # Pages Area Manager: Area Inspected: General This EHS Workplace Inspection was conducted by: Scope of the Inspection:

More information

ONSITE PLANT ASSESSMENT: PH: MOBILE PLANT RISK ASSESSMENT 2010.

ONSITE PLANT ASSESSMENT: PH: MOBILE PLANT RISK ASSESSMENT 2010. OSITE PLAT ASSESSMET: PH: 0400 536 983 MOBILE PLAT RISK ASSESSMET 2010. This form is to be completed in accordance with the Hazard Management Policy/Procedure and Plant and Equipment Safety Management

More information

PLANT HAZARD AND RISK ASSESSMENT WORKSHEET (PHA)

PLANT HAZARD AND RISK ASSESSMENT WORKSHEET (PHA) Matrix Assessment Date: 15.2.2011 Consequences Likelihood or Probability Plant Type: CRANE Plant Make: TADANO Plant Model: TL250E Fleet: 281 Plant Serial No. 335347 Assessment Facilitated by: A WHEELER

More information

HAZARD RECOGNITION EVALUATION and CONTROL

HAZARD RECOGNITION EVALUATION and CONTROL What is a hazard? HAZARD RECOGNITION EVALUATION and CONTROL Hazard - a dangerous object, event, behaviour or condition (in the workplace) which has the potential to cause injury, illness or property damage.

More information

PLANT RISK ASSESSMENT WORKSHEET (PRA)

PLANT RISK ASSESSMENT WORKSHEET (PRA) Matrix Assessment Number: 00001 Assessment Date: 01 Jul 2015 Type: HA25 Dump Truck Make: KOMATSU Model: Highline Articulated Asset/Fleet/Rego No: 11-101 Serial No. 710872 Assessment Facilitated by: Tahir

More information

RISK MANAGEMENT. Siobhan Mulvenna, GIOSH, FCIPD

RISK MANAGEMENT. Siobhan Mulvenna, GIOSH, FCIPD RISK MANAGEMENT Siobhan Mulvenna, GIOSH, FCIPD www.smt-solutions.com What is Risk Assessment? Like any other area of your business, health and safety needs to be properly managed. To do this you need to

More information

RISK ASSESSMENT. Bobcat Excavator. Models , (Series D & G) For. Version 1.2

RISK ASSESSMENT. Bobcat Excavator. Models , (Series D & G) For. Version 1.2 PO Box 50, Hornsby, NSW 2077 Phone: 1800 643 853 Web: www.bobcat.com.au RISK ASSESSMENT For Bobcat Excavator Models 322 341, (Series D & G) CONTENTS Applicability Standards referenced in the preparation

More information

Hazard Identification and Risk Management

Hazard Identification and Risk Management Hazard Identification and Risk Management Australian Workcover Authorities [supported by the Company] currently use a risk management approach in developing their legislative controls. This means that:

More information

4.1 The Vice-Chancellor and University Executive Committee

4.1 The Vice-Chancellor and University Executive Committee UON Key Risk Area: KRA 1.4 Plant and Equipment 1. Purpose This procedure describes how the University meets its obligation to ensure the health and safety of people, through the processes of selection,

More information

CONSTRUCTION HEALTH AND SAFETY MANAGEMENT SYSTEM BASELINE HIRA

CONSTRUCTION HEALTH AND SAFETY MANAGEMENT SYSTEM BASELINE HIRA RECOMMENDED ADDITIONAL CONTROLS TASK / ACTIVITY/ EQUIPMENT/ FACILITY HAZARDS UNWANTED EVENT MINIMUM CONTROLS REQUIRED RISK NO. LIKELI-HOOD CONSE-QUENCE RISK VALUE Project Risk Assessment Page 1 of 16 All

More information

in Australian Workplaces

in Australian Workplaces Copyright 2011 - OnGuard Safety Training Pty Ltd 1 of 7 in Australian Workplaces Introduction Part 2 Part 3 Part 4 Part 5 SafeWork SA Introduction Hazard identification is the process used to identify

More information

PLANT HAZARD REPORT. Plant Description: Element Aspect Plant Hazards and Controls Advice. Circular Saw

PLANT HAZARD REPORT. Plant Description: Element Aspect Plant Hazards and Controls Advice. Circular Saw PLANT HAZARD REPORT Plant Description: Circular Saw PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser

More information

A Health and Safety Tip Sheet for School Maintenance Staff. Did you know? Step 1. Identify job hazards. Step 2. Work towards solutions

A Health and Safety Tip Sheet for School Maintenance Staff. Did you know? Step 1. Identify job hazards. Step 2. Work towards solutions INSPECTION Health and CHECKLIST Safety Committees MAINTAINING SAFETY: A Health and Safety Tip Sheet for School Maintenance Staff 1 Maintenance and facilities staff members keep schools operational, safe,

More information

FACULTY OF EDUCATION LOW RISK HEALTH AND SAFETY FORM FORM B

FACULTY OF EDUCATION LOW RISK HEALTH AND SAFETY FORM FORM B FACULTY OF EDUCATION LOW RISK HEALTH AND SAFETY FORM FORM B Research Projects Date / / Faculty of Education Staff/Student No. Research Project Information Circle the appropriate research activity pertaining

More information

SAFE WORK METHOD STATEMENT Part 1 EXCAVATOR AUGER ATTACHMENT

SAFE WORK METHOD STATEMENT Part 1 EXCAVATOR AUGER ATTACHMENT SAFE WORK METHOD STATEMENT Part 1 EXCAVATOR AUGER ATTACHMENT Personal Protective Equipment Foot Hearing High Visibility Head Eye Day Operations Normal Requirements: Safety footwear, hearing protection,

More information

PLANT RISK ASSESSMENT REPORT

PLANT RISK ASSESSMENT REPORT PLANT RISK ASSESSMENT REPORT SECTION 1: PLANT IDENTIFICATION Report Number: 407/752 Assessment Date: 5 th May 2015 Company: Wacker Neuson Plant Type: Telescopic Light Balloon Make: Wacker Neuson Model:

More information

Example of an Occupational Health Risk Assessment

Example of an Occupational Health Risk Assessment SITE: ASSESSMENT DATE: EQUIPMENT/ AREA/TASK: Floor Manual ASSESSED BY: TASK/ EQUIPMENT floor manual sorting HAZARD RISK PERSONS RATING EXISITING CONTROL MEASURES AT RISK S L R FURTHER ACTION REQUIRED R

More information

Risk Assessment Form (Qualitative)

Risk Assessment Form (Qualitative) Assessment Form (Qualitative) Project / ocation:..d.a.s WATERS Contract No: RA & Issue No: 008 Prepared by:.r.smit Date: 10/10/16 Signature: ACTIVITY DESCRIPTION: Person (s) at risk: General Ground works

More information

SAFE WORK METHOD STATEMENT

SAFE WORK METHOD STATEMENT SAFE WORK METHOD STATEMENT AUGER / POST HOLE DIGGER Prepared for Client: Rural Construction & Maintenance Pty Ltd Project No: 1 Site: 660 Great Ocean Road, Bellbrae Date Prepared: 29/07/2015 1. RESPONSIBILITIES

More information

TRADE AREA: ELECTRICAL INDUSTRY

TRADE AREA: ELECTRICAL INDUSTRY TRADE AREA: ELECTRICAL INDUSTRY Some possible workplace hazards and possible ways for Host employers and Apprentices/Trainees in controlling these hazards. What are possible hazards? What could be possible

More information

Powerplay Paintball Brighouse Risk Assessment

Powerplay Paintball Brighouse Risk Assessment Chemical Gas bottles Vehicles Physical Electricity Environment Machinery Powerplay Paintball Brighouse Risk Assessment Location Powerplay Paintball Wakefield and Brighouse Venues Carried out by: Steven

More information

HAZARD RECOGNITION EVALUATION & CONTROL. Procedure No. HR-405-PR-2 Division Human Resources. Supersedes n/a Board Policy Ref.

HAZARD RECOGNITION EVALUATION & CONTROL. Procedure No. HR-405-PR-2 Division Human Resources. Supersedes n/a Board Policy Ref. COLLEGE OF THE NORTH ATLANTIC OPERATIONAL PROCEDURE TOPIC: HAZARD RECOGNITION EVALUATION & CONTROL Procedure No. Division Human Resources Supersedes n/a Board Policy Ref. GP-GR-805 Related Policy HR-405

More information

75 Years of Health and Safety Guidance

75 Years of Health and Safety Guidance H&S Guide: 60 Working Risks Personal Protective Equipment Personal Protective Equipment (also known as PPE) Employers have duties concerning the provision and use of personal protective equipment at work.

More information

RISK ASSESSMENT. Bobcat Skid Steer Loader. Series F & G (incl. S Models) For. SSL Version 2

RISK ASSESSMENT. Bobcat Skid Steer Loader. Series F & G (incl. S Models) For. SSL Version 2 PO Box 50, Hornsby, NSW 2077 Phone: 1800 643 853 Web: www.bobcat.com.au RISK ASSESSMENT For Bobcat Skid Steer Loader Series F & G (incl. S Models) CONTENTS Applicability Standards referenced in the preparation

More information

Safe Work Method Statement Transmission Field Protection Services

Safe Work Method Statement Transmission Field Protection Services Safe Work Method Statement Transmission Field Protection Services Purpose Permits Authorisations Training Equipment Fault finding on live V changeover/distribution boards N/A Electrical worker s licence,

More information

WHS OHS HAZARD REGISTER (SITE AND OFFICE OPERATIONS)

WHS OHS HAZARD REGISTER (SITE AND OFFICE OPERATIONS) WHS 017 - WHS 017 Hazard Register - Version 5.0 April 20 Doc No: WHS 017 Effective Date: 04/04/20 1 WORKING WITH EARTHMOVING PLANT/ TRUCKS/SITE VEHICLES COLLISIONS OTHER PLANT EQUIPMENT SITE VEHICLES PERSONNELL

More information

Temporary load-bearing support for structural alterations or repairs

Temporary load-bearing support for structural alterations or repairs CRITICAL NOTE This document only becomes a Safe Work Method Statement where the High Risk Construction Work section of this document is completed Company: ABN: Contact Person: Ph: Project/Site: Principal

More information

PLANT RISK ASSESSMENT REPORT

PLANT RISK ASSESSMENT REPORT PLANT RISK ASSESSMENT REPORT SECTION 1: PLANT IDENTIFICATION Report Number: 407/201-03 Assessment Date: 5 th June 2012 Company: Wacker Neuson Plant Type: Twin Drum Rollers Assessment Purpose: Operational

More information

Risk Assessment June Skirmish Paintball Games Exeter

Risk Assessment June Skirmish Paintball Games Exeter Ve hicl Physical Electricity Environment Machiner y Risk Assessment June 2012. Skirmish Paintball Games Exeter Location Skirmish Paintball Exeter Carried out by: Martin Collins Date 10 th June 2012 Authorised

More information

How severely could the risk hurt someone? Low/Insignificant First aid

How severely could the risk hurt someone? Low/Insignificant First aid Safe Work Method Statement No: WMS-02 Task: Concreting, Formwork and Steel Fixing This WMS is submitted to: Project name and site address: Contact: Preparation of WMS by: Robert Raams Company: Enwon (Australia)

More information

RISK RATING SAFE WORK METHOD STATEMENT 1 HIGH 2 MEDIUM 3LOW. I approve the use of this Safe Work Method Statement: NAME: POSITION: Department Manager

RISK RATING SAFE WORK METHOD STATEMENT 1 HIGH 2 MEDIUM 3LOW. I approve the use of this Safe Work Method Statement: NAME: POSITION: Department Manager RISK RATING 1 HIGH 2 MEDIUM 3LOW SAFE WORK METHOD STATEMENT Title: : Traineeship Ref No: 1 I approve the use of this Safe Work Method Statement: NAME: POSITION: Department Manager SIGNATURE: DATE: / /

More information

Recognition, Evaluation, and Control of Hazards

Recognition, Evaluation, and Control of Hazards Recognition, Evaluation, and Control of Hazards Latest revised date: October 26, 2011 Page 1 of 8 1.0 Introduction Memorial University has established a system for the recognition, evaluation, and control

More information

Accident/Incident Reporting and Investigation Procedures

Accident/Incident Reporting and Investigation Procedures Accident/Incident Reporting and Investigation Procedures Policy reference Workplace Health and Safety Policy Procedure reference Workplace Health and Safety Risk Assessment Procedures Procedure It is imperative

More information

Western Power Safe Work Method Statement Task details

Western Power Safe Work Method Statement Task details Western Power Safe Work ethod Statement Task details Description Transmission Tower Work D 10696821 Approved by Work Practices anager Review team SWS Development Approval date October 2015 Qualifications

More information

Occupational Health & Safety

Occupational Health & Safety Personal Development Level 3 Occupational Health & Safety Any injury particularly workplace injury is a major cause of concern for all involved in Occupational Health and Safety (OHS). The factors which

More information

PLANT RISK ASSESSMENT REPORT

PLANT RISK ASSESSMENT REPORT PLANT RISK ASSESSMENT REPORT SECTION 1: PLANT IDENTIFICATION Report Number: 407/201-03 Assessment Date: 5 th June 2012 Company: Wacker Neuson Plant Type: Twin Drum Rollers Assessment Purpose: Operational

More information

Job Safety & Environment Analysis

Job Safety & Environment Analysis Job Safety & Environment Analysis To be used when the risk is greater than LOW and / or Defined Hazardous Work and there is no standard procedure for the task. All sections of this JSEA form must be completed.

More information

Job Hazard Analysis Analysis by:

Job Hazard Analysis Analysis by: Job Analysis Possible s or Task Machinery e.g. Mowers Chainsaws Grinders Floor polisher Power tools Weed trimmers Sweepers Snow blowers Hedge trimmer Tiller Auto scrubbers Burnishers Ford tractor Sand

More information

Mobile Training Unit (MTU)

Mobile Training Unit (MTU) Mobile Training Unit (MTU) The MTU provides a convenient way of meeting training requirements by bringing a range of short duration health & safety and operative training onsite. Through the MTU, employees

More information

Accident Investigation and Hazard Analysis

Accident Investigation and Hazard Analysis Accident Investigation and Hazard Analysis June 18, 2015 Objectives: Accident Investigation Define accidents Review why accident investigations are important Review the purpose of accident investigations

More information

Rockhampton Office Brisbane Office Tarong Site. Barron Gorge Hydro PS Kareeya Hydro PS Mica Creek PS

Rockhampton Office Brisbane Office Tarong Site. Barron Gorge Hydro PS Kareeya Hydro PS Mica Creek PS Business Procedure Hot Work Document Number OHS-PROC-128 This document applies to the following sites: All Sites Rockhampton Office Brisbane Office Tarong Site Barron Gorge Hydro PS Kareeya Hydro PS Mica

More information

JACKHAMMER SAFETY TRAINING

JACKHAMMER SAFETY TRAINING JACKHAMMER SAFETY TRAINING The aim of the instructions is to provide you with knowledge of how to use the Pneumatic breaker in an efficient, safe way. The instructions also give you advice and tell you

More information

OSHA Office of Training and Education 2

OSHA Office of Training and Education 2 The Occupational Safety and Health Administration aims to ensure employee safety and health in the United States by working with employers and employees to create better working environments. Since its

More information

PPE and Tools PPE and Tools

PPE and Tools PPE and Tools PPE and Tools PPE and Tools PPE Definition Personal protective equipment (PPE) refers to protective clothing, helmets, goggles, or other garments or equipment designed to protect the wearer's body from

More information

PART 4: IMPLEMENTATION & OP

PART 4: IMPLEMENTATION & OP TITLE PART 4: IMPLEMENTATION & OPERATION Prepared by: 4.2 Personal Protective Equipment (PPE) Learning Objectives To define what is Personal Protective Equipment (PPE). To describe the management & legal

More information

Risk Assessment. Appendix A contains

Risk Assessment. Appendix A contains Risk Assessment Department The Cockpit Risk Assessment number AM/09/01 Date. 1 st July 01 Review due date 0 th July 01 Activity Maintenance and support service working Location The Cockpit Name of Assessor/s

More information

WORK ENVIRONMENT SAFETY. Body Mechanics. Electrical Safety. Employee. Safety. Fall. Needlestick Prevention. Safety

WORK ENVIRONMENT SAFETY. Body Mechanics. Electrical Safety. Employee. Safety. Fall. Needlestick Prevention. Safety WORK ENVIRONMENT SAFETY Electrical Safety Employee Safety Body Mechanics Fall Safety Needlestick Prevention Rev.: bw/january 2016 COMMON INJURIES AND ACCIDENTS Slips, trips and falls Back injuries Ergonomic

More information

The Sample Company Pty Ltd

The Sample Company Pty Ltd Job Safety and Environmental Analysis (JSEA) / Safe Work Method Statement (SWMS) Part 1: Project and Task Identification Process Initiators of SWMSs are responsible for consulting the Project Supervisor,

More information

Surface exploration drilling

Surface exploration drilling Checklist Surface exploration drilling This checklist is intended to assist employers to identify common hazards and manage risks associated with surface exploration drilling. June 2017 Background In surface

More information

WORK METHOD STATEMENT CARPET LAYING

WORK METHOD STATEMENT CARPET LAYING ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone

More information

Safety Checklist for Events Held at Hillbrook

Safety Checklist for Events Held at Hillbrook Safety Checklist for Events Held at Hillbrook Hazards/ Issues or Tasks 1. EVENT ACCESS AND EGRESS Entry / Exit areas are kept clear and accessible. For an evening event, that you have appropriate Lighting.

More information

CLUB RISK ASSESSMENT TEMPLATE

CLUB RISK ASSESSMENT TEMPLATE CLUB / VENUE (Guidance for clubs to adapt for their own use) 1. ALL AREAS Slips, trips and falls injury from slips trips and falls from uneven or damaged surfaces, holes etc. External ground surfaces,

More information

Western Power Safe Work Method Statement Task details

Western Power Safe Work Method Statement Task details Western Power Safe Work ethod Statement Task details Description Substation aintenance D 10721527 Approved by anager, Work Practices Review team SWS Development Approval date October 2015 Qualifications/icences

More information

Western Power Safe Work Method Statement Task details

Western Power Safe Work Method Statement Task details Western Power Safe Work ethod Statement Task details Description High Voltage Testing D 10697056 Approved by Work Practices anager Review team SWS Development Approval date ay 2013 Qualifications/icences

More information

POLICY ON THE PROVISION & USE OF PERSONAL PROTECTIVE EQUIPMENT

POLICY ON THE PROVISION & USE OF PERSONAL PROTECTIVE EQUIPMENT POLICY ON THE PROVISION & USE OF PERSONAL PROTECTIVE EQUIPMENT June 2013 Lead Manager John Green, Health & Safety Service Manager Responsible Director Director of Human Resources Approved By Health and

More information

Risk Assessment & Safe Working Practice

Risk Assessment & Safe Working Practice RA Ref Number: 32 Revision: 4 Project/Job Number Reference Insert Job Number Approval Date: 30/03/2018 RA Description: confined space Next Review Date: 01/04/2019 Notes: Please refer to Safe Working Practices

More information

Confined Spaces. This procedure applies to all workers of the Diocese of Maitland Newcastle (DoMN).

Confined Spaces. This procedure applies to all workers of the Diocese of Maitland Newcastle (DoMN). Purpose To provide guidance in controlling the risks associated with confined spaces including identifying confined spaces, working in a confined space and issuing confined space entry permits. Scope This

More information

Western Power Safe Work Method Statement Task details

Western Power Safe Work Method Statement Task details Western Power Safe Work Method Statement Task details Description Install and Maintain V Overhead Equipment and Associated ardware (de-energised) DM 10716988 Approved by Manager, Work Practices Review

More information

JOB HAZARD ANALYSIS FOR PPE

JOB HAZARD ANALYSIS FOR PPE JOB HAZARD ANALYSIS FOR PPE (PERSONAL PROTECTIVE EQUIPMENT) (MAINTENANCE) INTRODUCTION This Job Hazard/Safety Analysis has been conducted and prepared for the use of Maintenance personnel. This is a partial

More information

Working safely in an engineering environment

Working safely in an engineering environment Unit 001 Working safely in an engineering environment Level: 2 Credit value: 5 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to work

More information

Meet Today s Webinar Team

Meet Today s Webinar Team Meet Today s Webinar Team Moderator: Stacy Rose, CSP Stacy is a certified professional with 16 years experience in workplace safety. Stacy holds a bachelor s in industrial engineering and a master s in

More information

Safe Work Method Statement

Safe Work Method Statement Title Skid Steer Operation (Bobcat) SWMS No. 14 Authorized and email Signed by the (Managing Director / CEO / Partner / Proprietor) on Date 01/08 /2016 Safe Work Procedure for the Work:- Yes No Employees

More information

Laboratory Safety Manual Prepared by RAEIN-Africa & Partners. Under the Implementation of The National Biosafety Framework Project for Swaziland

Laboratory Safety Manual Prepared by RAEIN-Africa & Partners. Under the Implementation of The National Biosafety Framework Project for Swaziland Laboratory Safety Manual Prepared by RAEIN-Africa & Partners Under the Implementation of The National Biosafety Framework Project for Swaziland Contents Preamble/ Introduction... 2 Safety declaration...

More information

CP10 Sensor Installation and Maintenance Instructions

CP10 Sensor Installation and Maintenance Instructions 4030150/9 IM-P403-26 EMM Issue 9 CP10 Sensor Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Maintenance 5. Spare parts Copyright 2017

More information

QUEENSLAND UNIVERSITY OF TECHNOLOGY

QUEENSLAND UNIVERSITY OF TECHNOLOGY QUEENSLAND UNIVERSITY OF TECHNOLOGY SITE SPECIFIC SAFETY MANAGEMENT PLAN FOR SAMFORD HOUSE SAMFORD ECOLOGICAL RESEARCH FACILITY SAMFORD VALLEY 2007 Dylan Randall SN: 06305466 dylan.randall@student.qut.edu.au

More information

Hazard Identification and Risk Assessment Form. Risk Assessment

Hazard Identification and Risk Assessment Form. Risk Assessment Identification and Form Tool & Machine Work General Various (including potential fatalities) All staff complete safety induction programme at the start of the module. instructed in safe operation of each

More information

Hazard Management Making your workplace safer

Hazard Management Making your workplace safer Hazard Management Making your workplace safer A Guide to Hazard Identification, Risk Assessment, Control and Reviewing 1 What is a hazard? A hazard is something which has the potential to harm the health,

More information

Western Power Safe Work Method Statement Task details

Western Power Safe Work Method Statement Task details Western Power Safe Work ethod Statement Task details Description Cable Pitch Removal D 10715491 Approved by anager, Work Practices Review team SWS Development Approval date October 2015 Qualifications/icences

More information

SAFE WORK METHOD STATEMENT Part 1 CONCRETE SAWING

SAFE WORK METHOD STATEMENT Part 1 CONCRETE SAWING SAFE WORK METHOD STATEMENT Part 1 CONCRETE SAWING Personal Protective Equipment Foot Hearing High Visibility Head Eye Face Hand Protective Clothing Breathing Normal Requirements: Safety footwear, hearing

More information

Hazard Identification and Risk Assessment Form. Risk Assessment

Hazard Identification and Risk Assessment Form. Risk Assessment Identification and Assessment Form Assessment Tool & Machine Work General Various injuries (including potential fatalities) All staff complete safety induction programme at the start of the module. instructed

More information