SINK vs. FLOAT THE CASE OF THE CARTESIAN DIVER

Size: px
Start display at page:

Download "SINK vs. FLOAT THE CASE OF THE CARTESIAN DIVER"

Transcription

1 SINK vs. FLOAT THE CASE OF THE CARTESIAN DIVER INTRODUCTION: This lesson provides practice making observations and formulating hypotheses. It also provides opportunities to explore the concepts of buoyancy, density, Pascal's principle and the properties of liquids and gasses. OBJECTIVES: 1. Students will be able to articulate why an object floats or sinks in water. 2. Students will be able to understand the relationship between and object s density and the object s volume and mass. 3. Students will be able to apply concepts they learn in the context of the Cartesian Diver activity to a similar phenomenon in another context THEORY: A Cartesian diver can be made with a capped bottle of water (sealed container) and a suitable "diver." There are three basic concepts you need to understand: buoyancy, density, and Pascal's Principle. Buoyancy: When an object is placed in water, it displaces some of the water. The difference between the weight of the water displaced, and the weight of the object displacing it is called the buoyant force. If the buoyant force is greater than the mass of the object, the object will float. For example, a cube that measures one cm on a side has the capacity to displace one cm 3 of water. Since one cubic centimeter of water weighs one gram, if your cube weighs more than one gram, it will sink. If it weighs less than one gram, it will float Density: The relationship between an object s mass and its volume is usually expressed in terms of the object s density. Density is equal to the object s mass divided by the object s volume (D=M/V). Objects that are denser than water sink and objects that are less dense than water float. Water has a density of 1 gram/cm 3. Squeezing a sealed container increases pressure everywhere on the inside of the bottle; this concept is called Pascal's Principle. Water is virtually incompressible, but air is very compressible. So if that outside pressure squeezes an air bubble that is trapped anywhere inside the container the air bubble shrinks. This would then leave more room for more the water that is located in the container. Since the water itself is incompressible, nothing happens to its volume thus allowing this water to move into the space once occupied by the air. When you release your grip, the air in the container expands again and expels the extra water that had moved into its space.

2 EXPERIMENTAL PROCEDURE: You will explore four sets of diver stations in order to come to a more complete understanding of how density, buoyancy, and Pascal's Principle relate to the properties of liquids and gases; in particular, how these physical concepts relate to the operation of a Cartesian Diver. As you play with the divers at each station, think about why the diver behaves the way that it does; paying particular attention to the differences in each of the two divers/setups at each station. Your explanations at each station should include not only a labeled illustration of what is happening but a brief discussion of the same; incorporating the terms density, pressure, buoyancy, gas, liquid, and Pascal's principle. Your illustrations and explanations should include both when you squeeze the sides of the bottle and when you release the sides of the bottle. With respect to the illustrations they should be LARGE! At least a half-page in size in order to show the detail of what you re trying to convey! At EACH station you are to complete the following tasks and/or to contemplate the following questions when completing your illustrations and descriptions: Squeeze on the sides of each of the diver's bottles, respectively, and then release the sides; what do you observe? Does your observation depend on how hard you squeeze? Be as precise and as specific as you can with your observations. Are these two divers/setups exactly the same? Explain any differences (particularly major ones) and how each diver is able to behave the way it does; taking into consideration the scientific principles involved. Look carefully at the water level inside the diver as you apply and relieve pressure to the fluid by squeezing and releasing the outside of the bottle. Consider... What happens to the amount of air in the dropper when you press the sides of the bottle? What happens to the water level in the diver when you squeeze the bottle? What happens to the amount of the air in the dropper when you release the pressure? What happens to the water level when you release the bottle? What is the relationship between pressure and volume of air trapped in the dropper? Does the volume of the diver change? Is there any air/water entering or leaving the diver, or is something else causing the water level to change? Does the mass of the diver change? Again, do not forget to incorporate the terms density, pressure, buoyancy, gas, liquid, and Pascal's principle in your explanations!

3 Station #1: Are they really the same? Look carefully and note that one of the divers is open at the bottom while the other is sealed with glue. Your goal here is to explain the operation of each diver given these differences. Keep in mind that the main difference is the sealed vs. unsealed ends...not the amount of water in each, their relative mass, the respective bottle they are in, etc. The sketch should show enlarged detail of the diver(s) and what occurs as it/they dive.the bottle is not important here. Station #2: 1 vs. 2 Look carefully and note that there are two divers in the container; one labeled with a #1 and the other with a #2. Both of these divers are open at the bottom. Your goal here is to explain the operation of the divers compared to each other. The sketch should show enlarged detail of the diver(s) and what occurs as it/they dive.the bottle is not important here. Station #3: Unsinkable vs. Unfloatable Look carefully and note that one of the divers is floating at the top of its bottle while the other is sitting on the bottom of its bottle. Both of these divers are open at the bottom. Your goal here is to explain the operation of each diver given these differences. Keep in mind that the main difference is that one starts at the top of its bottle and the other at the bottom of its...not the physical appearance, stuff attached to it, the respective bottle they are in, etc; i.e. the fact that one of the divers has a wire wrapped around it and the other a nut is not, in appearance, relevant! The sketch should show enlarged detail of the diver(s) and what occurs as it/they dive.the bottle is not important here. Station #4: Full 2L vs. Partial 2L Look carefully and note that one of the divers is floating in a bottle that is completely full of water while the other is floating in a bottle that is half-full of water. Both of these divers are open at the bottom. Your goal here is to explain the operation of each diver given the difference(s) is the containers NOT the divers themselves; they are as identical as possible. The sketch should show enlarged detail of the bottles themselves.the divers are identical and will behave similarly. BEFORE you individually continue with Station #5, your group must complete the Post-Lab Questions and have them checked-off by Dr. Arts

4 Station #5: Create Your Own Having now investigated several diver stations and seen the variety of ways in which the divers operate, it is now time for you to design your own diver. Feel free to take a look at the sample divers around the room. Your goal is to create not only a working diver but one that is as unique (personalized) as possible. Step one would be to actually make a very simple diver and have it work properly. From there you will then "doll-it-up," so to speak...making it unique. Materials Pipette (plastic dropper) & metal nut Your bottle (2L or 3L), clear plastic bottle with an airtight lid Procedure Get a pipette (plastic dropper) and metal nut. Cut the pipette to the desired length; about ½ cm from the bottom of the large bulb. Screw the metal nut over this smaller, trimmed end of the pipette. It may be screwed as far up the stem as you'd like. Test your diver in the green test containers of water to see if it sinks (too dense) or is too buoyant (floats REALLY high up). Completely fill your bottle with water. Place the diver in the bottle of water. The water should over flow slightly...this ensures that you placed enough water in the bottle to begin with and did not leave an undesirable air pocket (remember that station??). So please do this part over a sink. Screw the cap on tightly. No water should leak out when the bottle is squeezed Squeeze the sides of the bottle. Release the sides of the bottle. If the diver does not operate properly, remove it from the bottle with the extraction tool and retest it in the green testing containers. Step two is to create your own personalized diver. Extract your diver from your bottle. You have a large collection of items to choose from in creating this operational "work of art": colored wire colored foam string and yarn colored plastic markers googly eyes pipe cleaners Be sure that any of the items you attach to your diver will still allow your diver to fit through the opening of your bottle!! Be Creative!! There are also hot glue guns and scissors available for construction purposes. Be sure not to actually touch the hot glue gun tip to the body of the plastic "diver." A melted hole in your diver's body is just like a hole melted into your body...undesirable consequences result! Once "personalized," retest the diver in the green testing container to be sure it has the proper buoyancy. Place it into your bottle and test it out. Good Luck!

5 REPORT ITEMS (To be submitted and stapled in the order indicated below) (-5 points if this is not done properly) COVER PAGE Lab Title Each lab group member s first and last name printed clearly Date DATA (worth up to 25 points) (10 points) Sketches/illustrations from each of the four stations. (15 points) A completed, and operational, Station #5 Diver. DATA ANALYSIS (worth up to 40 points) The completed task/contemplation questions and descriptions to accompany each of your illustrations; in order from Station #1, #2, #3, and then #4. These should be grouped with their corresponding sketch/illustration (if not already completed on the same page) GRAPHS (worth up to 0 points) None Required GRAPH ANALYSIS (worth up to 0 points) None Required CONCLUSION (worth up to 0 points) None Required

6 POST-LABORATORY QUESTIONS (worth up to 25 points) 1. If you wanted to make a series of divers (all sealed in the same bottle) that spell out the word H-E-L-L-O as they descended. Using diagrams and words, how would you do it? 2. A nail is pushed into a piece of Styrofoam packing material. Do you think that would work as a diver? Explain. 3. What, if anything, would you have had to do differently in order to make the diver operate correctly if our diver/bottle had used... a)...oil instead of water? b)...a heavier hex nut? c)...a smaller dropper? d)...a larger bottle? e)...helium instead of air? f)...the water in the bottle was hotter but the diver was room temperature? 4. A Cartesian diver is stuck on the bottom, with not quite enough air to get it to the top. List four different ways to get the sunken diver out of the top of the bottle, and explain why you think each would work. These may be simple or complex...don't over think a perfectly viable solution to the problem if one exists. You can also consider the different factors that affect a gas volume. a) b) c) d) 5. In the final "create your own station" we will top off the water in your bottle, before we seal it, to make your diver work better. Why do we do this? 6. Can you think of anything outside the laboratory that works on the same principles as the Cartesian Diver? Explain the connection. One example would be submarine...sorry, you can't use this one! Feel free to explore the internet!

Simulating Microgravity with Buoyancy A Space School Lesson Plan

Simulating Microgravity with Buoyancy A Space School Lesson Plan ASTRONAUT TRAINING...UNDERWATER Simulating Microgravity with Buoyancy A Space School Lesson Plan by Bill Andrake, Swampscott Middle School Swampscott, Massachusetts Science Lesson: Buoyancy - Based on

More information

CARTESIAN DIVER. GRADE: Middle to upper elementary as a demonstration. Middle school and up if students are construction it themselves.

CARTESIAN DIVER. GRADE: Middle to upper elementary as a demonstration. Middle school and up if students are construction it themselves. CARTESIAN DIVER GRADE: Middle to upper elementary as a demonstration. Middle school and up if students are construction it themselves. GROUP SIZE: Can be done as a demonstration to launch discussion or

More information

Making a Cartesian Diver Toy

Making a Cartesian Diver Toy Making a Cartesian Diver Toy Abstract: The purpose of this activity is to construct a Cartesian Diver device illustrating the concept described by Boyle s Law, so that a theory may be constructed explaining

More information

The density of a substance is the same for all samples of that substance.

The density of a substance is the same for all samples of that substance. 8.8.a Density and Buoyancy Students know density is mass per unit volume. P71 Wood Steel The density of a substance is the same for all samples of that substance. 1. The two blocks shown have the same

More information

CARTESIAN DIVER (1 Hour)

CARTESIAN DIVER (1 Hour) (1 Hour) Addresses NGSS Level of Difficulty: 2 Grade Range: K-2 OVERVIEW In this activity, students will build a Cartesian diver and discover how compression and changes in density cause the diver to mysteriously

More information

The Science of Boat Design

The Science of Boat Design 1.3 Read The Science of Boat Design matter: anything that has mass and takes up space. density: the amount of matter in a given amount of space. buoyant force: the upward push that keeps objects floating

More information

Students measure the change in pressure by varying the volume of trapped air in a syringe while:

Students measure the change in pressure by varying the volume of trapped air in a syringe while: How Does a Trapped Gas Behave? Teacher Information Objective Students investigate the effect of changes in the volume of a confined gas on pressure at constant temperature. Using the pressure sensor, students

More information

Shark Biology Buoyancy by Bill Andrake

Shark Biology Buoyancy by Bill Andrake Shark Biology Buoyancy by Bill Andrake Science Lesson: Buoyancy - Based on Webisode 45 - Shark Biology Grade Level: 6-8 Time: Four (45-50 minute) class periods Introduction Jonathan narrates an educational

More information

In the liquid phase, molecules can flow freely from position to position by sliding over one another. A liquid takes the shape of its container.

In the liquid phase, molecules can flow freely from position to position by sliding over one another. A liquid takes the shape of its container. In the liquid phase, molecules can flow freely from position to position by sliding over one another. A liquid takes the shape of its container. In the liquid phase, molecules can flow freely from position

More information

Grade 8 Science: Unit 2-Fluids Chapter 9: Force, Pressure Area

Grade 8 Science: Unit 2-Fluids Chapter 9: Force, Pressure Area Grade 8 Science: Unit 2-Fluids Chapter 9: Force, Pressure Area Key Terms: hydraulic systems, incompressible, mass, neutral buoyancy, pascal, pneumatic systems, pressure, unbalanced forces, weight, Archimedes

More information

In the liquid phase, molecules can flow freely from position. another. A liquid takes the shape of its container. 19.

In the liquid phase, molecules can flow freely from position. another. A liquid takes the shape of its container. 19. In the liquid phase, molecules can flow freely from position to position by sliding over one another. A liquid takes the shape of its container. In the liquid phase, molecules can flow freely from position

More information

Key Terms Chapter 7. boiling boiling point change of state concentration condensation deposition evaporation flow rate fluid freezing point

Key Terms Chapter 7. boiling boiling point change of state concentration condensation deposition evaporation flow rate fluid freezing point Foldable Activity Using the instructions on page 267 in your textbook on how to make foldables, write a key term on each front tab, and the definition on the inside (see example that I made up). You will

More information

Chapter 9. Forces and Fluids

Chapter 9. Forces and Fluids Chapter 9 Forces and Fluids Key Terms hydraulic systems incompressible mass neutral buoyancy pascal pneumatic systems pressure unbalanced forces weight Archimedes principle average density balanced forces

More information

Fluids PROCEDURE. 1. Record the mass of the block of wood. 2. Record the mass of the beaker of water (without the block).

Fluids PROCEDURE. 1. Record the mass of the block of wood. 2. Record the mass of the beaker of water (without the block). Fluids This format for this experiment will be a little different from what you re used to. Instead of spending all your time at one station interacting with a single apparatus you ll be spending 10-15

More information

Buoyancy and Density. Buoyant Force and Fluid Pressure. Key Concept Buoyant force and density affect whether an object will float or sink in a fluid.

Buoyancy and Density. Buoyant Force and Fluid Pressure. Key Concept Buoyant force and density affect whether an object will float or sink in a fluid. 2 Buoyancy and Density Key Concept Buoyant force and density affect whether an object will float or sink in a fluid. What You Will Learn All fluids exert an upward buoyant force on objects in the fluid.

More information

Review: Fluids. container into which it has been poured. changes gases are compressible. pressure changes

Review: Fluids. container into which it has been poured. changes gases are compressible. pressure changes Forces in Fluids Review: Fluids o A fluid is a substance that is able to flow and assume the form of the container into which it has been poured o A compressible fluid is one that can change its volume

More information

Anglophone School District - North

Anglophone School District - North Anglophone School District - North Grade 7 Science - Unit Lesson Guide Fluids Table of Contents Scientific Literacy!!!!!!!!!! 3 Science Assessment Overview!!!!!!!! 4 Focus and Context!!!!!!!!!! 5 Unit

More information

Lab 11 Density and Buoyancy

Lab 11 Density and Buoyancy b Lab 11 Density and uoyancy Physics 211 Lab What You Need To Know: Density Today s lab will introduce you to the concept of density. Density is a measurement of an object s mass per unit volume of space

More information

Density and Buoyancy Notes

Density and Buoyancy Notes Density and Buoyancy Notes Measuring Mass and Volume 3.1 Density A balance can be used to measure the mass of an object. If the object is a liquid, pour it into a graduated cylinder to measure the volume.

More information

Fluids. James H Dann, Ph.D. Say Thanks to the Authors Click (No sign in required)

Fluids. James H Dann, Ph.D. Say Thanks to the Authors Click   (No sign in required) Fluids James H Dann, Ph.D. Say Thanks to the Authors Click http://www.ck12.org/saythanks (No sign in required) To access a customizable version of this book, as well as other interactive content, visit

More information

mass of container full of air = g mass of container with extra air = g volume of air released = cm 3

mass of container full of air = g mass of container with extra air = g volume of air released = cm 3 1992 Q32 The air pressure inside the passenger cabin of an airliner is 9 x 10 4 Pa when the airliner is at its cruising height. The pressure of the outside atmosphere at this height is 4 x 10 4 Pa. Calculate

More information

Float a Big Stick. To investigate how objects float by analyzing forces acting on a floating stick

Float a Big Stick. To investigate how objects float by analyzing forces acting on a floating stick Chapter 19: Liquids Flotation 53 Float a Big Stick Purpose To investigate how objects float by analyzing forces acting on a floating stick Required Equipment/Supplies Experiment vernier calipers 250-mL

More information

Unit A: Mix and Flow of Matter

Unit A: Mix and Flow of Matter Unit A: Mix and Flow of Matter Science 8 1 Section 3.0 THE PROPERTIES OF GASES AND LIQUIDS CAN BE EXPLAINED BY THE PARTICLE MODEL OF MATTER. 2 1 Viscosity and the Effects of Temperature Topic 3.1 3 Viscosity

More information

Scuba Divers Science Performance Task Grades 5-8 Name: Scuba Divers

Scuba Divers Science Performance Task Grades 5-8 Name: Scuba Divers Name: Scuba Divers Two identical twins named Jill and Rachel were planning separate trips to go scuba diving. Jill planned to scuba dive in the ocean off the coast of Maine and Rachel planned to scuba

More information

End of Chapter Exercises

End of Chapter Exercises End of Chapter Exercises Exercises 1 12 are conceptual questions that are designed to see if you have understood the main concepts of the chapter. 1. While on an airplane, you take a drink from your water

More information

Multiple Representations of Buoyancy. Meredith Weglarz, Jessica Oliveira, James Vesenka University of New England, Department of Chemistry and Physics

Multiple Representations of Buoyancy. Meredith Weglarz, Jessica Oliveira, James Vesenka University of New England, Department of Chemistry and Physics Multiple Representations of Buoyancy Meredith Weglarz, Jessica Oliveira, James Vesenka University of New England, Department of Chemistry and Physics Abstract: A modeling lab exercise, based on multiple,

More information

PHYSICS 206a HOMEWORK #12 SOLUTIONS

PHYSICS 206a HOMEWORK #12 SOLUTIONS PHYSICS 06a HOMEWORK #1 SOLUTIONS M =10 cm P=10 5 Pa 1. sample of gas has a pressure of 10 5 Pascals. (By the way: The atmospheric pressure at sea level is 101,5 Pascals.) If this gas is held in a cylinder

More information

Fluids, Pressure and buoyancy

Fluids, Pressure and buoyancy Fluids, Pressure and buoyancy Announcements: CAPA due Friday at 10pm. Comment on the hint in Problem 5. CAPA solutions from previous sets can be found by logging onto CAPA and selecting View Previous Set

More information

PHYS:1200 LECTURE 13 FLUIDS (2)

PHYS:1200 LECTURE 13 FLUIDS (2) 1 PHYS:1200 LECTURE 13 FLUIDS (2) Lecture 13 deals with the properties of fluids at rest or fluid statics. We will be discussing mostly liquids and will introduce two important principles of fluid statics:

More information

North Carolina State University PY131 Lab Manual

North Carolina State University PY131 Lab Manual INTRODUCTION In the 3 rd century BC, Archimedes was asked by a king to figure out the purity of the gold in the king s crown. While Archimedes knew he could find the weight of the crown using a balance,

More information

Science 8 Chapter 9 Section 1

Science 8 Chapter 9 Section 1 Science 8 Chapter 9 Section 1 Forces and Buoyancy (pp. 334-347) Forces Force: anything that causes a change in the motion of an object; a push or pull on an object balanced forces: the condition in which

More information

Student Exploration: Archimedes Principle

Student Exploration: Archimedes Principle Name: Date: Student Exploration: Archimedes Principle Vocabulary: Archimedes principle, buoyant force, density, displace, mass, volume, weight Prior Knowledge Questions (Do these BEFORE using the Gizmo.)

More information

Name Class Date. (pp ) Write the letter of the correct answer in the space provided.

Name Class Date. (pp ) Write the letter of the correct answer in the space provided. Skills Worksheet Directed Reading A Section: Buoyancy and Density (pp. 412 419) 1. What is the upward force that fluids exert on all matter called? a. pascal force b. atmospheric pressure c. buoyant force

More information

PHYS 1020 LAB 8: Buoyancy and Archimedes Principle. Pre-Lab

PHYS 1020 LAB 8: Buoyancy and Archimedes Principle. Pre-Lab PHYS 1020 LAB 8: Buoyancy and Archimedes Principle Note: Print and complete the separate pre-lab assignment BEFORE the lab. Hand it in at the start of the lab. Pre-Lab While at home, put one ice cube (made

More information

Hydrostatics Physics Lab XI

Hydrostatics Physics Lab XI Hydrostatics Physics Lab XI Objective Students will discover the basic principles of buoyancy in a fluid. Students will also quantitatively demonstrate the variance of pressure with immersion depth in

More information

Build Your Own Electromagnet

Build Your Own Electromagnet Build Your Own Electromagnet Stuff you need: 9-volt battery Insulated copper wire with ends stripped Large iron nail Small paper clips or staples Wrap the copper wire tightly around the nail and touch

More information

Exam Review Mass, Weight, Density, Buoyancy, States of Matter

Exam Review Mass, Weight, Density, Buoyancy, States of Matter Exam Review Mass, Weight, Density, Buoyancy, States of Matter Volume An object s volume is the amount of space it takes up. The volume of a cup of water can change if you freeze it in to a solid or boil

More information

Activity Title: Exploring the Ocean with Robots

Activity Title: Exploring the Ocean with Robots BEST OF COSEE HANDS-ON ACTIVITIES Activity Title: Exploring the Ocean with Robots Learning Objectives This lesson will introduce students to robotic submarines, called gliders, including basic properties

More information

End of Chapter Exercises

End of Chapter Exercises End of Chapter Exercises Exercises 1 12 are conceptual questions that are designed to see if you have understood the main concepts of the chapter. 1. While on an airplane, you take a drink from your water

More information

Notes Chapter 3. Buoyancy

Notes Chapter 3. Buoyancy Notes Chapter 3 Buoyancy Pressure in a Fluid 3.2 Pressure and the Buoyant Forces Liquids and gases are fluids materials that can flow and have no definite shape. Objects in a fluid experience a buoyant

More information

From and

From  and From http://www.school-for-champions.com/science/fluidpressure.htm and http://www.school-forchampions.com/science/fluidfloating.htm by Ron Kurtus, School for Champions Pressure in Fluids by Ron Kurtus

More information

17.2 and 17.3 Classifying Matter Liquids. Liquids

17.2 and 17.3 Classifying Matter Liquids. Liquids 17.2 and 17.3 Classifying Matter Liquids Read p.295-301 in book Liquids Liquids have an indefinite shape, but a definite volume. the same shape as their container. particles that are close together, but

More information

3. A fluid is forced through a pipe of changing cross section as shown. In which section would the pressure of the fluid be a minimum?

3. A fluid is forced through a pipe of changing cross section as shown. In which section would the pressure of the fluid be a minimum? AP Physics Multiple Choice Practice Fluid Mechanics 1. A cork has weight mg and density 5% of water s density. A string is tied around the cork and attached to the bottom of a water-filled container. The

More information

Vacuum P=0. h=76 cm A B C. Barometer

Vacuum P=0. h=76 cm A B C. Barometer Recap: Pressure Pressure = Force per unit area (P = F /A; units: Pascals) Density of object = mass / volume (ρ = m /V; units: kg / m 3 ) Pascal s Law:Pressure is transmitted equally in all directions throughout

More information

The use of the analytical balance, and the buret.

The use of the analytical balance, and the buret. 1211L Experiment 1. Density 2015 by H. Patterson Instructor Notes: Students make measurements individually then share data to make the graph. There are four volumetric measurements to be studied; 3.00

More information

Experiment #2. Density and Measurements

Experiment #2. Density and Measurements Experiment #2. Density and Measurements Goals 1. To measure and record length, volume and mass accurately with the correct number of significant figures 2. To use significant figures correctly in calculations.

More information

Pressure is defined as force per unit area. Any fluid can exert a force

Pressure is defined as force per unit area. Any fluid can exert a force Physics Notes Chapter 9 Fluid Mechanics Fluids Fluids are materials that flow, which include both liquids and gases. Liquids have a definite volume but gases do not. In our analysis of fluids it is necessary

More information

1. All fluids are: A. gases B. liquids C. gases or liquids D. non-metallic E. transparent ans: C

1. All fluids are: A. gases B. liquids C. gases or liquids D. non-metallic E. transparent ans: C Chapter 14: FLUIDS 1 All fluids are: A gases B liquids C gases or liquids D non-metallic E transparent 2 Gases may be distinguished from other forms of matter by their: A lack of color B small atomic weights

More information

Physics 1021 Experiment 4. Buoyancy

Physics 1021 Experiment 4. Buoyancy 1 Physics 1021 Buoyancy 2 Buoyancy Apparatus and Setup Materials Force probe 1000 ml beaker Vernier Calipers Plastic cylinder String or paper clips Assorted bars and clamps Water Attach the force probe

More information

Vocabulary: Objectives: Materials: For Each Station: (Have 2 stations for each liquid; 8 stations total, in student groups of 3-4) Students will:

Vocabulary: Objectives: Materials: For Each Station: (Have 2 stations for each liquid; 8 stations total, in student groups of 3-4) Students will: Author: Ms. Adrienne Maribel López Date Created: August 2007 Subject: Properties of Matter Level: 6 th 8 th grade Standards: NYS Learning Standards for Mathematics, Science, and Technology-- Intermediate

More information

DENSITY AND BUOYANCY

DENSITY AND BUOYANCY DENSITY AND BUOYANCY DENSITY - RECAP What is DENSITY? The amount of MASS contained in a given VOLUME Density describes how closely packed together the particles are in a substance Density Experiment SINK

More information

Additional Information

Additional Information Buoyancy Additional Information Any object, fully or partially immersed in a fluid, is buoyed up by a force equal to the weight of the fluid displaced by the object. Archimedes of Syracuse Archimedes principle

More information

Lecture 29 (Walker: ) Fluids II April 13, 2009

Lecture 29 (Walker: ) Fluids II April 13, 2009 Physics 111 Lecture 29 (Walker: 15.3-4) Fluids II April 13, 2009 Lecture 29 1/32 Pressure in Fluids Pressure is the same in every direction in a fluid at a given depth; if it were not, the fluid would

More information

LAB 7. ROTATION. 7.1 Problem. 7.2 Equipment. 7.3 Activities

LAB 7. ROTATION. 7.1 Problem. 7.2 Equipment. 7.3 Activities LAB 7. ROTATION 7.1 Problem How are quantities of rotational motion defined? What sort of influence changes an object s rotation? How do the quantities of rotational motion operate? 7.2 Equipment plumb

More information

Chapter Five: Density and Buoyancy

Chapter Five: Density and Buoyancy Chapter Five: Density and Buoyancy 5.1 Density 5.2 Buoyancy 5.3 Heat Affects Density and Buoyancy 5.1 Mass and Weight Mass is the amount of matter in an object. Weight is a measure of the pulling force

More information

We can tell that diameter of the tube influence the pressure of the water at the bottom.

We can tell that diameter of the tube influence the pressure of the water at the bottom. IDS 102 Pressure Part II You may have found that there is a slight difference in the distance of the two streams, but this is due to frictional forces between the water and the tube, not the different

More information

Under the Sea - Virtual Excursion

Under the Sea - Virtual Excursion Under the Sea - Virtual Excursion Welcome to the Maker Project Under the Sea Virtual Excursion. In this session, students will investigate the some of the difficulties and physical forces involved in exploring

More information

Chapter 1, Lesson 5: Air, It s Really There

Chapter 1, Lesson 5: Air, It s Really There Chapter 1, Lesson 5: Air, It s Really There Key Concepts In a gas, the particles (atoms and molecules) have weak attractions for one another. They are able to move freely past each other with little interaction

More information

Purpose. Introduction

Purpose. Introduction Purpose The objective of this experiment is to determine the density of an unknown liquid and solid. The students will become familiar with the techniques for measuring mass and volume of several samples

More information

Density. Chapters 12-14: Phases of Matter. Example: Density. Conceptual Check. Springs 2/27/12. Mass Density vs. Weight Density

Density. Chapters 12-14: Phases of Matter. Example: Density. Conceptual Check. Springs 2/27/12. Mass Density vs. Weight Density Chapters 12-14: Phases of Matter Density Sequence of increasing molecule motion (and kinetic energy) Solid Liquid Gas The densities of most liquids and solids vary slightly with changes in temperature

More information

3.4 Compression of Fluids

3.4 Compression of Fluids 3.4 Compression of Fluids Another useful property of some fluids is compressibility. When a force pushes on an object, the object is said to be under compression. Objects under compression tend to deform

More information

Build Your Own Electromagnet

Build Your Own Electromagnet Build Your Own Electromagnet 9-volt battery Insulated copper wire with ends stripped Large iron nail Small paper clips or staples Wrap the copper wire tightly around the nail and touch the ends of the

More information

Buoyancy and the Density of Liquids (approx. 2 h) (11/24/15)

Buoyancy and the Density of Liquids (approx. 2 h) (11/24/15) Buoyancy and the Density of Liquids (approx. 2 h) (11/24/15) Introduction Which weighs more, a pound of lead or a pound of feathers? If your answer to this question is "a pound of lead", then you are confusing

More information

Nadia Naghi. Hung Do. Minh Lu. George Manoli PHYS Lab 12: Archimede s Principle. July 2, 2014

Nadia Naghi. Hung Do. Minh Lu. George Manoli PHYS Lab 12: Archimede s Principle. July 2, 2014 1 Nadia Naghi Hung Do Minh Lu George Manoli PHYS 2125 Lab 12: Archimede s Principle July 2, 2014 2 ABSTRACT: This experiment studies the principle of density by applying Archimedes principle and calculating

More information

K-8 45 MIN 1 VOLUNTEER PER 5 CHILDREN DIFFERENT OBJECTS FLOAT OR SINK IN VARIOUS FLUIDS

K-8 45 MIN 1 VOLUNTEER PER 5 CHILDREN DIFFERENT OBJECTS FLOAT OR SINK IN VARIOUS FLUIDS K-8 45 MIN 1 VOLUNTEER PER 5 CHILDREN DIFFERENT OBJECTS FLOAT OR SINK IN VARIOUS FLUIDS BASED ON SEVERAL FACTORS. THE DENSITY OF THE FLUID VS. THE DENSITY OF THE OBJECT IS THE PRIMARY PRINCIPLE WITH REGARD

More information

Science In Action 8 - Unit 1 Mix and Flow of Matter

Science In Action 8 - Unit 1 Mix and Flow of Matter 1.0 Fluids are used in Technological devices and common everyday materials Key Concepts Workplace Hazardous Materials Information System (WHMIS) and safety fluid properties What does the acronym W.H.M.I.S.

More information

Card 1 Chapter 17. Card 2. Chapter 17

Card 1 Chapter 17. Card 2. Chapter 17 Card 1 Card 2 Liquid A - 1.4 g/ml; Liquid B -.82 g/ml; Liquid C - 1.0 g/ml; one liquid you know. What is it? Also how will they stack? Where will a 1.6 g/ml object end up? Find the density of a 5 milliliter,

More information

Fluids. How do fluids exert pressure? What causes objects to float? What happens when pressure in a fluid changes? What affects the speed of a fluid?

Fluids. How do fluids exert pressure? What causes objects to float? What happens when pressure in a fluid changes? What affects the speed of a fluid? CHAPTER 3 SECTION 3 States of Matter Fluids KEY IDEAS As you read this section, keep these questions in mind: How do fluids exert pressure? What causes objects to float? What happens when pressure in a

More information

Fluid Mechanics - Hydrostatics. Sections 11 5 and 6

Fluid Mechanics - Hydrostatics. Sections 11 5 and 6 Fluid Mechanics - Hydrostatics Sections 11 5 and 6 A closed system If you take a liquid and place it in a system that is CLOSED like plumbing for example or a car s brake line, the PRESSURE is the same

More information

5 th Grade - Lesson 2.4 Density and Sinking and Floating

5 th Grade - Lesson 2.4 Density and Sinking and Floating 5 th Grade - Lesson 2.4 Density and Sinking and Floating Objective Students will be able to explain that the density of a substance has to do with how heavy it is compared to the size of the object. Students

More information

Students will use two different methods to determine the densities of a variety of materials and objects.

Students will use two different methods to determine the densities of a variety of materials and objects. Activity #1: Determining Densities Summary The concept of density has many useful applications. This image is an electron density map, used by biochemists to help understand the structure of a protein.

More information

Clicker Question: Clicker Question: Clicker Question: Phases of Matter. Phases of Matter and Fluid Mechanics

Clicker Question: Clicker Question: Clicker Question: Phases of Matter. Phases of Matter and Fluid Mechanics Newton's Correction to Kepler's First Law The orbit of a planet around the Sun has the common center of mass (instead of the Sun) at one focus. A flaw in Copernicus s model for the solar system was A:

More information

TEACHING SCIENCE BY OCEAN INQUIRY Pressure

TEACHING SCIENCE BY OCEAN INQUIRY Pressure TEACHING SCIENCE BY OCEAN INQUIRY Pressure Nine activities are described below. Explanations are provided after the instructions. Goals: The activities below address different aspects of pressure. Activity

More information

Air exerts a on the walls of its container. Air Pressure is due to the of the molecules in the air as they

Air exerts a on the walls of its container. Air Pressure is due to the of the molecules in the air as they Lesson 1,2: What is Air Pressure? Air exerts a on the walls of its container. This is often called Pressure. Air Pressure is due to the of the molecules in the air as they collide with the walls. Air has.

More information

PHYSICS - CLUTCH CH 17: FLUID MECHANICS.

PHYSICS - CLUTCH CH 17: FLUID MECHANICS. !! www.clutchprep.com INTRO TO DENSITY LIQUIDS and GASES are types of. So we use the term to refer generally to both Liquids AND Gases. The DENSITY of a material is a measure of how tight the molecules

More information

Students will be using containers with water and raw eggs.

Students will be using containers with water and raw eggs. Science Unit: Lesson 1: Beluga Whale Float or Sink? School Year: 2015/2016 Developed for: Developed by: Grade level: Duration of lesson: Notes: Champlain Heights Annex, Vancouver School District Dr Dom

More information

What Causes Wind? Exploration: How Does Air Move When Pressure Builds Up? 4.2 Explore. Predict

What Causes Wind? Exploration: How Does Air Move When Pressure Builds Up? 4.2 Explore. Predict 4.2 Explore What Causes Wind? In Learning Set 1, you built an anemometer. You used it to measure wind speed and direction in your community. In the last section, you read about how wind and ocean currents

More information

L 13 Fluid Statics [2] More on fluids. How can a steel boat float. A ship can float in a cup of water! Today s weather

L 13 Fluid Statics [2] More on fluids. How can a steel boat float. A ship can float in a cup of water! Today s weather L 13 Fluid Statics [2] More on fluids. How can a steel boat float. A ship can float in a cup of water! Today s weather The deeper you go the higher the pressure P Top A hypothetical volume of water inside

More information

Websites to Assist PBL

Websites to Assist PBL Teacher Overview Websites to Assist PBL The following sites were chosen to support each project-based unit in this book. Take time at the beginning of each unit to tour the sites and familiarize yourself

More information

Determination of the Gas-Law Constant (R) using CO2

Determination of the Gas-Law Constant (R) using CO2 Determination of the Gas-Law Constant (R) using CO2 EXPERIMENT 11 Prepared by Edward L. Brown and Miranda Raines, Lee University The student will become familiar with ideal gases and how their properties

More information

Example A: A 400-N force is applied to a tabletop over a square area with side-length L = 20-cm.

Example A: A 400-N force is applied to a tabletop over a square area with side-length L = 20-cm. Physics 17 Part H Fluids and Pressure Uni-Directional Pressure The pressure that is applied over an area is the force applied, divided by the area. A 400-N force is applied to a tabletop over a square

More information

Lecture 19 Fluids: density, pressure, Pascal s principle and Buoyancy.

Lecture 19 Fluids: density, pressure, Pascal s principle and Buoyancy. Lecture 19 Water tower Fluids: density, pressure, Pascal s principle and Buoyancy. Hydraulic press Pascal s vases Barometer What is a fluid? Fluids are substances that flow. substances that take the shape

More information

L-14 Fluids [3] Buoyancy why things float. Buoyant Force F B. Archimedes principle. Archimedes Principle

L-14 Fluids [3] Buoyancy why things float. Buoyant Force F B. Archimedes principle. Archimedes Principle Buoyancy why things float L-14 Fluids [3] Review fluid statics Pascal s Principle hy things float Fluids in Motion Fluid Dynamics Hydrodynamics Aerodynamics TITANIC The trick is to keep the water on the

More information

Investigating Sinking and Floating

Investigating Sinking and Floating Chapter 13 Forces in Fluids Investigation 13A Investigating Sinking and Floating Background Information When an object is placed in a fluid, the force of gravity causes part or all of the object to sink

More information

Chapter 9 Fluids CHAPTER CONTENTS

Chapter 9 Fluids CHAPTER CONTENTS Flowing fluids, such as the water flowing in the photograph at Coors Falls in Colorado, can make interesting patterns In this chapter, we will investigate the basic physics behind such flow Photo credit:

More information

Chapter 15 Fluid. Density

Chapter 15 Fluid. Density Density Chapter 15 Fluid Pressure Static Equilibrium in Fluids: Pressure and Depth Archimedes Principle and Buoyancy Applications of Archimedes Principle By Dr. Weining man 1 Units of Chapter 15 Fluid

More information

PHYS 101 Previous Exam Problems

PHYS 101 Previous Exam Problems PHYS 101 Previous Exam Problems CHAPTER 14 Fluids Fluids at rest pressure vs. depth Pascal s principle Archimedes s principle Buoynat forces Fluids in motion: Continuity & Bernoulli equations 1. How deep

More information

Motion, Forces, and Energy Revision (Chapters 3+4)

Motion, Forces, and Energy Revision (Chapters 3+4) Motion, Forces, and Energy Revision (Chapters 3+4) What is force? The force exerted on a surface divided by the total area over which the force is exerted. What is the link between pressure & area? Pressure

More information

MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.

MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. Exam Name MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 1) The concept of pressure involves both 1) A) force and area. B) force and volume. C) area

More information

Different Size, Same Shape

Different Size, Same Shape activity 3 Different Size, Same Shape OBJECTIVES Students experiment with objects of the same shape and material but of different sizes, in order to discover whether size is a factor that affects buoyancy.

More information

Authors: Mário Rui da Cunha Pereira, Hands on Science

Authors: Mário Rui da Cunha Pereira, Hands on Science 9-11 years Science Content: Physical Science Target Concepts/Skills: Density and Bouyancy Target Age group: 9-11 years Duration of activity: 3 hours Summary: In this activity children inquire about why

More information

Why do things float? Climate and Global Change. Introduction

Why do things float? Climate and Global Change. Introduction Why do things float? Introduction Archimedes of Syracuse (ca. 287-212 B.C.), a physical scientist, is credited with understanding two basic principles: When describing the mechanical advantage gained by

More information

CONCEPTUAL PHYSICS LAB

CONCEPTUAL PHYSICS LAB PURPOSE The purpose of this lab is to determine the density of an unknown solid by direct calculation and by graphing mass vs. volume for several samples of the solid. INTRODUCTION Which is heavier, a

More information

Fluid Mechanics. Liquids and gases have the ability to flow They are called fluids There are a variety of LAWS that fluids obey

Fluid Mechanics. Liquids and gases have the ability to flow They are called fluids There are a variety of LAWS that fluids obey Fluid Mechanics Fluid Mechanics Liquids and gases have the ability to flow They are called fluids There are a variety of LAWS that fluids obey Density Regardless of form (solid, liquid, gas) we can define

More information

Page 1

Page 1 Contents: 1. Thrust and Pressure 2. Pressure in Fluids 3. Buoyancy 4. Why objects sink or Float when placed on surface of water? 5. Archimedes Principle 6. Relative Density Learning Objectives: The students

More information

FLOATING AND SINKING

FLOATING AND SINKING NAME SCHOOL INDEX NUMBER DATE FLOATING AND SINKING 1. 1994 Q5a P2 (a) State Archimedes s principal (1 mark) 2. 1996 Q29 P1 A solid copper sphere will sink in water while a hollow copper sphere of the same

More information

Dec 6 3:08 PM. Density. Over the last two periods we discussed/observed the concept of density. What have we learned?

Dec 6 3:08 PM. Density. Over the last two periods we discussed/observed the concept of density. What have we learned? Over the last two periods we discussed/observed the concept of density. What have we learned? is a ratio of mass to volume describes how much matter is packed into a space is a property of both solids

More information

Fluids always move from high pressure to low pressure. Air molecules pulled by gravity = atmospheric pressure

Fluids always move from high pressure to low pressure. Air molecules pulled by gravity = atmospheric pressure 9.1 Fluids Under Pressure Fluids always move from high pressure to low pressure w Fluids under pressure and compressed gases are used for a variety of everyday tasks Air molecules pulled by gravity = atmospheric

More information

AP Lab 11.3 Archimedes Principle

AP Lab 11.3 Archimedes Principle ame School Date AP Lab 11.3 Archimedes Principle Explore the Apparatus We ll use the Buoyancy Apparatus in this lab activity. Before starting this activity check to see if there is an introductory video

More information

Inquiry Module 1: Checking the calibration of a micropipette

Inquiry Module 1: Checking the calibration of a micropipette Inquiry Module 1: Checking the calibration of a micropipette 1. Introduction Larger volumes (1mL and more) are usually measured using pipets or measuring cylinders. Such cylinders and pipets are labelled

More information