f i r e - p a r t s. c o m
|
|
- Ashlyn Pierce
- 5 years ago
- Views:
Transcription
1 A M E R I C A N F L A M E A F AF-1000 Seies Manual Gas Contol Valve APPLICATION The AF-1000 Manual Gas Contol Valve is designed fo use in gas in heath poducts, wall mount funaces, and space heating appliances. Fo use with Popane o natual gas. AF-1XXX MODEL IDENTIFICATION A F 1 X X X f i e - p a t s. c o m 0 = With Safety Seal 1 = With Safety Seal (3-Plunge) 5 = With-out Safety Seal Ameican Flame 0 = Manual without Solenoid. 1 = With ON/OFF Solenoid (Remote) 1000 Seies 2 = With ON/OFF/Vaiable DC Moto Dive (Remote) 3 = With High/Low Step Moto (Model AF-1000MOT) 4 = Manual fo 3-Plunge Safety Seal Type of Valve 0 = Vented Contol Valve 1 = Ventfee Contol Valve FEATURES Multi positional (All Plans) / Vesatile Mounting. Powe unit poweed by 30mv themocouple. CSA ated capacity 80,000 BTU/h at 1 wc pessue dop (All inlet/outlet configuations). AF-1000 seies available with 0ºF to 225ºF (-18 0 C to 107ºC) tempeatue ange. Multiple outlet connections single inlet connection (All 3/8 NPT). Fine mesh sceens on inlet. Multiple mounting holes (All SAE theads) Low pofile / Compact size. Easy pilot adjustment scew (Located on the font of the valve) (Vented Only). No convesation fom natual to popane gas equied. White letteing on OFF/ON/ knob. Vented / Vent fee models available. 1 and 2 plastic extension knobs available. REV. 1/9/2010 Page 1 of 9
2 TABLE #1 AF-1000 VOLTAGE / CAPACITY RATINGS Model Position Themocouple Capacity@ 1 Pessue Dop Capacity@ 1 Pessue Dop Side inlet & Back outlet Back inlet & outlet All Models Multi positional 30 mv 55,000 BTU/h 55,000 BTU/h Pessue Dop in. w.c Pessue Dop & Capacity Cuve AF-1000 Seies Gas Contol outlet = 3.5 Pessue dop outlet = 3.0 pessue dop 5.0 Inlet & 2.5 outlet = 2.5 pessue dop outlet = 2..0 pessue dop outlet = 1.5 pessue dop outlet = 1.0 pessue dop f i e - p a t Btu/h X s 1K. c o m This infomation is Ameican Flame lab geneated data and is to be used as efeence only. SPECIFICATIONS Main Gas Connections: Valve: 3/8 in. NPT thead on all Inlet and Outlet connections. Pilot Gas connections and flow: Pilot locations: Themocouple theads: Themocouple location Connection Size: 7/16-24 UNS. Flow: ~ 5,250 Btu/h at 7.0 in wc Maximum. Top of valve. 11/32-32 UNS double lead. Option: 8mm x1.0 connection. (Ventfee) Back of valve. Ambient Tempeatue Range: 0 0 F to F (-18 0 C to C) Voltage: Appovals: 30 mv Themocouple CSA Intenational Repot Numbe Model / Voltage / Capacity: Refeence Table #1 REV. 1/9/2010 Page 2 of 9
3 DIMENSIONS f i e - p a t s. c o m REV. 1/9/2010 Page 3 of 9
4 INSTALLATION When Installing this Poduct. Read these instuctions caefully. Failue to follow these instuctions completely could damage the poduct o cause a hazadous condition. Check the atings given in the instuctions and on the poduct to make sue the AF-1000 Gas Contol is suitable fo you application. Installe must be a tained, expeienced sevice technician. Afte installation is complete, check out poduct opeation as povided in these instuctions. Oxygen depletion hazad. Can cause injuy o death due to asphyxiation. 1. Use only vented gas pilot assemblies on vented appliances. 2. Use only unvented pilot assemblies on unvented appliances. Fie o explosion hazad. Can cause popety damage, sevee injuy o death. Follow these wanings exactly: 1. Disconnect powe befoe wiing to pevent electical shock o equipment damage. 2. To avoid dangeous accumlation of fuel gas, tun off gas supply at the appliance sevice valve befoe stating installation, and pefom a Gas Leak Test afte installation is complete. 3. Always f install i the sediment e tap - in the p gas supply a line to pevent t contamination s. of c the gas o contol. m 4. Do not foce the gas contol knob. Use only you hand to tun the gas contol knob. Neve use any tools. If the gas contol knob does not opeate by hand, a qualified sevice technician should eplace the gas contol. Foce o any attempt to epai the gas contol valve can esult in fie o explosion. Location: Locate the AF-1000 gas contol whee it cannot be affected by steam cleaning, high humidity, dipping wate, coosive chemicals, dust o gease accumulation o excessive heat. To assue pope opeation, follow these guidelines: 1. Locate gas contol in well-ventilated aea. 2. Mount gas contol high enough to avoid exposue to flooding o splashing wate. 3. Assue the ambient tempeatue does not exceed the ambient tempeatue atings fo each component. 4. Cove gas contol if appliance is cleaned with wate, steam, o chemicals o to avoid dust and gease accumulation. 5. Avoid locating gas contol whee exposue to coosive chemical fumes o dipping wate is likely. Install Piping to Gas Contol All piping must comply with the local codes and odinances o with the National Fuel code (ANSI Z223.1 NFPA No. 54) which eve applies. Tubing installation must comply with appoved standads and pactices. 1. Use new, popely eamed pipe fee fom chips, When tubing is used, assue the ends ae squae, debued and clean. All tubing bends must be smooth and without defomation. 2. Run pipe o tubing to the contol. If tubing is used, obtain a tube-to-pipe coupling to connect the tubing to the contol. 3. Install sediment tap in the supply line to the gas contol. See Figue #1 Gas Leakage Hazad. Failue to follow pecautions can esult in a gas-filled wok aea. Shut off the main gas supply befoe emoving end cap. Test fo gas leakage when installation is complete. Figue #1 REV. 1/9/2010 Page 4 of 9
5 Install Contol 1. Mount contol 0 to 90 degees in any diection, fom the upight position of the gas contol knob, including vetically. 2. Mount the contol so gas flow is in the diection of the aow on the side Figue #2 o back of the contol. 3. Thead pipe 5/16 in. into the contol. Do not inset deepe than 3/8 in. Valve distotion o malfunction can esult if the pipe is inseted too deeply. 4. Apply a modeate amount of good quality pipe compond (do not use Teflon tape) to pipe only, leaving two (2) end theads bae. On LP installations, use compond esistant to LP gas. See Figue #2 5. Remove plastic dust seals ove the contol Inlet and Outlet if necessay. 6. Connect pipe to contol Inlet and Outlet. Use wench on eithe side of the pipe outlet. See Figue #3 Figue #3 Gas Contol Knob Settings Gas contol knob settings ae as follows: f i e - p a t s. c o m 1. OFF: Pevents main gas flow though the valve. 2. ON Pemits main bune and pilot flow. Gas contol and emote contol of main bune gas flow. 3. : Opens pilot valve and allows gas flow to pilot bune. NOTE: When emote contols and wied DC opeated heath/wall switches ae used, the gas contol knob must be in the ON position. Note Valve font (Face) views in Figues #4 & #5 & #6 ON/OFF SOLENOID FACE VIEW OF WITH OUT SOLENOID FACE VIEW OF WITH SOLENOID Figue #4 Figue #5 ON/OFF/VARIABLE DC MOTOR DRIVE ON/OFF/HI/LO STEP MOTOR DRIVE FACE VIEW OF WITH ON/OFF DC MOTOR DRIVE Figue #6 FACE VIEW OF WITH ON/OFF STEP MOTOR Figue #6-A REV. 1/9/2010 Page 5 of 9
6 Pilot Gas and Lighting Pocedue Tun the gas contol knob counteclockwise to the position, push the gas contol knob IN and HOLD in position. This will open the pilot valve and allows gas to flow to the pilot bune. Light the pilot bune while holding the gas contol knob in until a stong pilot flame is pesent. (Appoximately 60 seconds) Release the gas contol knob. The gas contol knob will hold in and engages the valve powe unit. Tun the gas contol knob counte clockwise to the ON position, the main bune valve will open and the main bune will ignite. NOTE: Gas contols with model numbe AF-1000 fo vented to decease the pilot flame tun the pilot adjustment scew clockwise. To incease the pilot flame tun the pilot adjustment counte clockwise. NOTE: Gas contols with model numbe AF-1100 fo vent fee applications have NO pilot adjustment, pe test standad. Shut off Pocedue 1. To shut OFF the system, tun the gas contol knob clockwise to the OFF position. This action will close the main gas valve and disengages the safety pilot valve. Howeve the powe unit must dop out befoe the lighting sequence can begin again. This may take as much as 3 minutes. 2. To elight f i the pilot, follow e the steps - in p the Pilot a Gas and Lighting t Pocedue s. section. c o m Pilot Bune Connections This gas contol uses a pilot bune with a themocouple, the connections ae as follows: 1. Connect the pilot tubing fitting into the gas contol connection and tighten. (Use caution on bass connectos) Note: Figue #7 & #8 2. Connect themocouple into powe unit at the back of the gas contol. Note: Figue #8 NOTE: A standad themocouple o quick dop out themocouple with 11/32-32 UNS theads and Ventfee ODS themocouple with 8mm x 1.0 thead can be used. Note: Figue #8 ASSEMBLY AF-1000 Valve Pilot Connection FITTING CONNECTION 3/8 NPT OUTLETS Themocouple Connection 3/8 NPT INLET THERMOCOUPLE CONNECTION Figue #7 Figue #8 REV. 1/9/2010 Page 6 of 9
7 DC poweed featue of the AF1000 The AF-1000 has a non-leak safety featue that allows the installation of an ON/OFF solenoid. Note: Figue #9 With the use of this DC poweed latching ON/OFF solenoid allows the use of a DC poweed switch o emote contol (Model CON 1001) NOTE: The AF-1025 and AF-1125 (ONLY) do not have a non-leak safety featue. This model comes fom the factoy with the ON/OFF DC moto Dive pe installed Note: Figue #10 With the use of this DC poweed ON/OFF Moto Dive the valve will opeate ON/OFF (ONLY) with the use of a emote contol (Model RCAF 1005) Note: If the Hi/Lo Step Moto used on the AF-1035 and AF-1135 valve the (Motel AF-4000MOT) model must be used. If the Hi/Lo Step Moto used on the AF-1030 and AF-1130 valve the (Motel AF-1000MOT) model must used. Each model equies a unique opeating contol tansmitte and eceive specifically set-up fo the desied Hi/Lo incements equied by the bune installed in the appliance that the AF-1000 valve system is used on. 1/4 Male Connectos 1/4 Male Connectos ON/OFF ON/OFF/VARIABLE f i SOLENOID e - p a t DC MOTOR s DRIVE. c o m FACE VIEW OF WITH SOLENOID Figue # 9 Figue #10 FACE VIEW OF WITH ON/OFF DC MOTOR DRIVE 4 pin Connecto ON/OFF-HI/LO STEP MOTOR (AF-1000MOT & AF-4000MOT) FACE VIEW OF WITH ON/OFF STEP MOTOR Figue #11 Fie o explosion hazad. Can cause popety damage, sevee injuy o death. 1. Stand away fom the main bune while lighting, Hidden gas leaks can cause flashbacks in the appliance. 2. Check fo gas leaks with ich soap and wate solution any time wok is done on a gas system. Gas Leak Test 1. Paint the pipe connectos upsteam of the gas contol with ich soap and wate solution, Bubbles indicate a gas leak. 2. If a leak is detected, tighten the pipe connections. 3. Light the main bune. 4. With the main bune in opeation, paint the pipe joints (including adaptes) with ich soap and wate solution. 5. If anothe leak is detected, tighten the adapte scews, joints, and pipe conections. 6. Replace pat if leak cannot be stopped. REV. 1/9/2010 Page 7 of 9
8 Equipment Dange Hazad. Impope adjustment of gas input and bune can cause caboning and/o unnecessay shutdown of the system. 1. Do not exceed the input ating stamped on the appliance nameplate, o manufactue ecommended bune oifice pessue fo size oifice(s) used. Be sue pimay ai supply to the main bune is popely adjusted fo complete combustion. Follow the instuctions of the appliance manufactue. 2. IF CHECKING GAS INPUT BY CLOCKING GAS METER: Be sue thee is no gas flow though the mete othe that to the appliance being checked. Othe appliances must emain off with the pilots extinguished (o the consumption must be deducted fom the mete eading). Convet the flow ate to Btuh as descibed in the GAS Contols Handbook, fom , and compae to the Btuh input ating on the appliance nameplate. Check Safety Shutdown Pefomance Fie o explosion hazad. Can cause popety damage, sevee injuy o death. 1. Pefom the safety shutdown test any time wok is done on a gas system. Place the gas contol knob in the position. Main bune should go off and the pilot should emain lit. 2. Extingush the pilot flame. The AF-1000 pilot gas flow should stop within thee (3) minutes when using a standad themocouple. When using a quick dop out themocouple, the pilot gas flow should stop within thity (30) seconds. Safety shutoff f of i the pilot gas e poves - complete p shutdown a because safety t shutoff s valve. pohibits c main o bune mand pilot gas flow. 3. Relight pilot bune and opeate the system though one (1) complete cycle to ensue all contols opeate popely. MAINTENANCE Fie o explosion hazad. Can cause popety damage, sevee injuy o death. Do not attempt to take apat the gas contol o to clean it. Impope assembly and cleaning can cause uneliable opeation. Regula peventive maintenance is impotant in applications that place a heavy load on the system such as those used in commeical cooking, agicultual, and industial application because: In many such applications, paticulaly commeical cooking, the equipment opeates 100,000 to 200,000 cycles pe yea. Such heavy cycling can wea out the gas contol in one to two yeas. Exposue to wate, dit, chemicals, and heat can damage the gas contol and shut down the contol system. The maintance pogam should include egula checkout of the system as outlined in the Checkout section, and checkout of the system as discibed in the appliance manufactues liteatue. Maintance fequency must be detemined individually fo each application, Some consideations ae: Cycling fequency. Appliances that may cycle 20,000 times annually should be checked monthly. Intemittent use. Appliances that ae used seasonally should be checked befoe shutdown and again befoe the next use. Consequence of unexpected shutdown, Whee the cost of an unexpected shutdown would be high, the system should be checked moe often. Dusty, wet, o coosive envionment. Because these envionments can cause the gas contol to deteioate moe apidly, the system should be checked moe often. Any contol should be eplaced if it does not pefom popely on checkout o sevice. In addition, eplace any module if it is wet o looks like it has been wet. Fie o explosion hazad. Can cause popety damage, sevee injuy o death. Do not disassemble the gas contol; it contains non eplaceable components. Attempted disassembly o epai can damage the contol. REV. 1/9/2010 Page 8 of 9
9 Fie o explosion hazad. Can cause popety damage, sevee injuy o death. Exactly follow the wanings and the lighting instuctions. 1. Befoe lighting, smell aound the appliance aea fo gas. If the appliance uses LP (bottled) gas, be sue to smell next to the floo because LP gas is heavie than ai. If you smell gas, immediately shut off the manual valve in the gas piping to the appliance o, on LP at the tank. Do not ty to light any appliance. Do not touch any electical switch o use the phone. Leave the building and call you gas supplie. If you gas supplie cannot be eached, call the fie depatment. 2. Do not foce the gas contol knob on the appliance. Use only you hand to tun the gas contol knob. Neve use any tools. If the knob does not opeate by hand, have a qualified sevice technician eplace the contol. Foce o any attempted epai can esult in fie o explosion. 3. The gas conol must be eplaced if it has been flooded with wate. Call a qualified sevice technician. 4. The gas contol is a safety device. It must be eplaced in case of any physical damage such as bent teminals, missing pats, stipped theads, o evidence of exposue to heat. IMPORTANT: Follow the opeating instuctions povided by the manufactue of you heating appliance. TROUBLESHOOTING IMPORTANT: Toubleshooting pocedues should only be pefomed by an expeienced qualified sevice technician. f i e - p a t s. c o m If the pilot will not stay lit: 1. Confim that the themocouple is making tight pope conection to the valves powe unit 2. With the pilot buning and the gas contol knob tuned to the position, the voltage should be18 mv fo a new themocouple. You must pess and hold the gas contol knob in the position to maintain the gas flow to the pilot. If the output does not meet the minimum voltage, eplace the themocouple. The powe unit will hold in down to 3 mv. If the output of the themocouple is below 3 mv, eplace the themocouple. If main bune does not come ON when the emote contol is tuned ON o the DC poweed wall switch is tuned ON o if the DC moto dive on models AF-1025 o AF-1125 will not un and tun the bune ON when the button on the emote tansmitte is pessed: 1. Confim that the pilot is lit. 2. Confim that the gas contol knob is in the ON position. 3. If a DC poweed switch o emote contol is used to tun the valve ON/OFF confim that the switch o emote is in the ON position. 4. Check the connections on the RED and BLACK wies fom the emote eceive. 5. Check the DC powe supply of the emote eceive o the wall switch. Limited Waanty Ameican Flame, Inc. waants the AF-1000 Valve seies fo 12 months fom the date of puchase o installation to the oiginal puchase to be fee fom defects in mateials and wokmanship. Damage to the AF-1000 Valve caused by accident, misuse, abuse, o installation eo, whethe pefomed by a contacto, sevice company, o owne, is not coveed by this waanty. Ameican Flame will not be esponsible fo labo chages and/o damage incued in installation, epai, eplacement, o fo incidental o consequential damage. Some states, povinces, and nations do not allow exclusion o limitations of incidental o consequential damages, so the above limitations o exclusions may not apply. This waanty gives you specific legal ights. You may also have othe ights that vay by state, povince, o nation. Ameican Flame, Inc Consevation Way Fot Wayne, IN Phone (260) Fax (260) REV. 1/9/2010 Page 9 of 9
VS8420 Millivolt Gas Valve
VS8420 Millivolt Gas Valve INSTALLATION INSTRUCTIONS APPLICATION The VS8420 Millivolt Gas Valve is compact and has a 60,000 Btuh capacity (1 in. pressure drop for straightthrough configuration). The design
More informationV8200A,C,H,M and VR8200A,C,H,M Continuous Pilot Combination Gas Controls
V800A,C,H,M and VR800A,C,H,M Continuous Pilot Combination Gas Controls APPLICATION These continuous pilot combination gas controls are used in gas-fired appliances up to 00 cfh capacity of natural gas.
More informationProviding solutions for your most demanding applications
Aeoquip Hose Assembly Maste Catalog Poviding solutions fo you most demanding applications Teflon hose Eveflex smooth boe S-Seies... -3 SC-Seies.... -4 S-TW Seies.... -5 SC-TW Seies.... -6 HI-PSI Seies...
More informationVR8200A Continuous Pilot Combination Gas Controls
SUPER TRADELINE VR800A Continuous Pilot Combination Gas Controls Application These continuous pilot combination gas controls are used in gas-fired appliances that have up to 00 cfh capacity of natural
More informationVR8205S,T Direct Ignition Combination Gas Controls
VR805S,T Direct Ignition Combination Gas Controls INSTALLATION INSTRUCTIONS APPLICATION TheVR805S,T Direct Ignition Combination Gas Controls are used in gas-fired appliances with up to 70 ft 3 /hr capacity
More informationVR8305 Direct Ignition Combination Gas Control
Honeywell VR8305 Direct Ignition Combination Gas Control Application These direct ignition combination gas controls are used in gas-fired appliances with capacities up to 300 feet 3 /hour at inch wc pressure
More information55CM ROUND CHARCOAL KETTLE BBQ
IMPORTANT - Please ead the instuctions caefully befoe assembling 55CM ROUND CHARCOAL KETTLE BBQ Assembly A Instuctions PLEASE RETAIN THE INSTRUCTIONS FOR FUTURE USE. Safety and Cae Advice the Wait fo it
More informationG92 Series BASOTROL Automatic Pilot Gas Valve
Installation Instructions Issue Date September 17, 2008 G92 Series BASOTROL Automatic Pilot Gas Valve Installation IMPORTANT: Only qualified personnel should install or service BASO Gas Products. These
More informationG196 Series BASOTROL Redundant Combination Gas Valve with Manual Shutoff Valve
Installation Instructions Issue Date August 19, 2008 G196 Series BASOTROL Redundant Combination Gas Valve with Manual Shutoff Valve Application The G196 valves are suitable for use with natural gas, Liquefied
More informationVR8105, VR8205, and VR8305 Direct Ignition Combination Gas Controls
VR805, VR805, and VR8305 Direct Ignition Combination Gas Controls APPLICATION These direct ignition gas controls are used in gas-fired appliances with up to 45 ft 3 /hr capacity at in. wc pressure drop
More informationCORESTA RECOMMENDED METHOD N 68
COESTA ECOMMENDED METHOD N 68 DETEMINATION OF CABON MONOXIDE IN THE MAINSTEAM SMOKE OF CIGAS BY NON-DISPESIVE INFAED ANALYSIS (Januay 2010) 1. FIELD OF APPLICATION The method is applicable to the gas phase
More informationG196 Series BASOTROL Redundant Combination Gas Valve with Manual Shutoff Valve
Installation Instructions Issue Date March 13, 2013 G196 Series BASOTROL Redundant Combination Gas Valve with Manual Shutoff Valve Application The G196 valves are suitable for use with natural gas, Liquefied
More informationINSTALLATION AND OPERATING INSTRUCTIONS BIG TEX VENTED GAS LOGS
INSTALLER! PLEASE LEAVE WITH HOMEOWNER INSTALLATION AND OPERATING INSTRUCTIONS BIG TEX VENTED GAS LOGS by Please Note: It is important that you read instructions before installing or operating gas logs
More informationBGA158, BGA171 and BGA110 Series Shutoff Gas Valve
Installation Instructions BGA Series Issue Date October 3, 2017 BGA158, BGA171 and BGA110 Series Shutoff Gas Valve Applications The BGA Series shutoff gas valve is an electrically operated gas valve that
More informationData Sheet. Linear bearings
Data Pack G Issued Septembe 1999 1502325042 Data Sheet Linea beaings Instument ball beaings and shafts The RS ange of instument quality ball bushing beaings ae fo 1 8in, 3 16in and 1 4in shafts. Each beaing
More informationBGA158 Series CE Approved Class B Shutoff Gas Valve
Installation Instructions BGA158 Issue Date March 22, 2016 BGA158 Series CE Approved Class B Shutoff Gas Valve Applications The BGA158 Series shutoff gas valve is an electrically operated shutoff valve
More informationBGA158 Series CE Approved Class A Shutoff Gas Valve
Installation Instructions BGA158 Issue Date August 24, 2011 BGA158 Series CE Approved Class A Shutoff Gas Valve Applications The BGA158 Series shutoff gas valve is an electrically operated gas valve that
More informationG96 Series BASOTROL Dual Operator Valve
Installation Instructions 9. Issue Date February 22, 2013 G96 Series BASOTROL Dual Operator Valve Applications The G96 valves are combination, dual operator, automatic valves available with or without
More informationDual Solenoid Gas Valve Installation
Installation IMPORTANT: These instructions are intended as a guide for qualified personnel installing or servicing FLYNN Gas Products. Carefully follow all instructions in this bulletin and all instructions
More informationUL Listed GM-20/25 and GM-40/45 Series Dual-block Multi-function Gas Control Valves
Installation Sheets Manual 121 Gas Combustion Combination Controls and Systems Section G Technical Bulletin GM-20/25 GM-40/45 Issue Date 1298 UL Listed GM-20/25 and GM-40/45 Series Dual-block Multi-function
More information36G22, 36G23, 36G24 & 36G52 36J22, 36J23, 36J24 & 36J52 DSI and HSI Single Stage Combination Gas Valve
Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE. DESCRIPTION
More informationGM-7000 Series CE Approved Gas Control Valve
Installation Instructions GM-7000 Issue Date November 9, 2012 GM-7000 Series CE Approved Gas Control Valve Installation IMPORTANT: These instructions are intended as a guide for qualified personnel installing
More information36E DSI and HSI Two-Stage Combination Gas Valve INSTALLATION INSTRUCTIONS
INLET PRESS TAP WTE-RODGERS 36E54-214 DSI and HSI Two-Stage Combination Gas Valve INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS
More informationFALL PROTECTION PROGRAM
FALL PROTECTION PROGRAM 13255 South St. Ceitos, CA 90703 Telephone 562-924-3364 Fax 562-924-0521 Table of Contents Fall Potection... 3 Fall Potection Is Requied... 3 Fall Potection Types... 3 Standad Guadails,
More informationOperator: Save these instructions for future use!
INLET PRESS TAP WHITE-RODGERS 36E93-304 Delay-Opening Combination Gas Valve INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY
More informationf i r e - p a r t s. c o m
Tuble Shting Guide f AFVK-SP Seies Valve Kit (AF-4000 Seies Gas Valves) f i e - p a t s. c m AFVK-SP, AFVK-SP-H/L, AFVK-SP-MH/L AFVK-SP Seies Valve Kit Tuble Shting Guide (AF-4000 Seies) TABLE OF CONTENTS
More informationVR8104, VR8204, and VR8304 Intermittent Pilot Combination Gas Controls
VR8104, VR8204, and VR8304 Intermittent Pilot Combination Gas Controls APPLICATION These intermittent pilot gas controls are used in gas-fired appliances with up to 415 ft3/hr capacity at 1 in. wc pressure
More information36E DSI, HSI & Proven Pilot Two-Stage Combination Gas Valve INSTALLATION INSTRUCTIONS
INLET PRESS TAP WTE-RODGERS 36E96-314 DSI, HSI & Proven Pilot Two-Stage Combination Gas Valve INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL
More informationINSTALLATION INSTRUCTIONS MANUAL ON/OFF SAFETY VALVE/PILOT KIT MODEL GA9050A-1 (F0235)
P/N 126905-01 Rev. B 11/2016 INSTALLATION INSTRUCTIONS MANUAL ON/OFF SAFETY VALVE/PILOT KIT MODEL GA9050A-1 (F0235) For All Single, Dual and Triple Burner Natural and Propane/LP Gas Logs P126905-01 For
More information36H SERIES Combination Gas Valve
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE. DESCRIPTION The 36H series combination gas valve is
More information36E03 and 36E38 DSI and HSI Step Opening Combination Gas Valve INSTALLATION INSTRUCTIONS
INLET PRESS TAP WHITE-RODGERS 36E03 and 36E38 DSI and HSI Step Opening Combination Gas Valve INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS
More informationGS-20/25 and GS-40/45 Series Single-block Multi-function Gas Control Valves
Installation Sheets Manual 121 Gas Combustion Combination Controls and Systems Section G Technical Bulletin GS-20/25 GS-40/45 Issue Date 1298 GS-20/25 and GS-40/45 Series Single-block Multi-function Gas
More informationINSTALLATION AND OPERATING INSTRUCTIONS
INSTALLER! PLEASE LEAVE WITH HOMEOWNER INSTALLATION AND OPERATING INSTRUCTIONS Please Note: It is important that you read instructions before installing or operating this appliance GENERAL INFORMATION
More informationBGC258 Series BASOTROL Gas Valve
Installation Instructions BGC258 Issue Date September 6, 2017 BGC258 Series BASOTROL Gas Valve Installation IMPORTANT: These instructions are intended as a guide for qualified personnel installing or servicing
More informationGM Series Dual-Block Multi-Function Gas Control Valves
Installation Sheets Manual 121 Gas Combustion Combination Controls and Systems Section G Technical Bulletin GM Issue Date 0297 GM Series Dual-Block Multi-Function Gas Control Valves Figure 1: GM Series
More informationOperator: Save these instructions for future use!
WHITE-RODGERS Type 36C04, 36C14 Step-Opening Combination Gas Control (24 Volt, 120 Volt & 750 mv Models) INSTALLATI INSTRUCTIS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW
More informationH15 Series BASO 100% Shutoff, Automatic Pilot Valve
Installation Instructions Issue Date February 22, 2013 H15 Series BASO 100% Shutoff, Automatic Pilot Application The H15 Series pilot valves provide safe lighting and complete shutoff of pilot and main
More informationNatural Gas to L.P. Gas Conversion Kit
Natural Gas to L.P. Gas Conversion Kit For Bosch 96% AFUE Gas Furnace, BGH96 Model Installation Instructions 3124627 2 Natural Gas to L.P. Gas Conversion Kit Installation Instructions Data subject to change
More informationVR8305 Direct Ignition Dual Automatic Valve Combination Gas Controls
Direct Ignition Dual Automatic Valve Combination Gas Controls The VR8305 Direct Ignition Dual Automatic Valve Combination Gas Controls are for use with direct ignition systems in gas-fired appliances.
More informationSPECIFICATIONS ATTENTION
VPS 504 S06 Installation Manual - P/N 80122 - Ed. 01/09 VPS 504 S06 and S05 Valve Proving System Installation Instructions VPS 1 6 Gases Natural gas, air and other inert gases. NOT suitable for butane
More informationNatural Gas to L.P. Gas Conversion Kit
Natural Gas to L.P. Gas Conversion Kit For Bosch 80% AFUE Gas Furnace, BGS80 Model Installation Instructions 3124627 2 Natural Gas to L.P. Gas Conversion Kit Installation Instructions Data subject to change
More informationINSTRUCTIONS FOR CONVERTING CONDENSING GAS MOBILE HOME FURNACES MODEL SERIES: CMA3*, CMC1*, VMA3*, VMC1*
INSTRUCTIONS FOR CONVERTING CONDENSING GAS MOBILE HOME FURNACES MODEL SERIES: CMA3*, CMC1*, VMA3*, VMC1* THIS KIT CONTAINS: AOPS7741 (NATURAL TO PROPANE CONVERSION PARTS FOR MODEL SIZE, 50) AOPS7742(NATURAL
More informationOUTDOOR FOOTBALL FIELD
www integalspo com USING AREAS: Mini football fields, pivate buildings, pivate schools and pivate entepeunes. SYSTEM DESCRIPTION: Composite steel constuction with synthetic tuf floo, oof and sides coveed
More informationROBERT H. PETERSON CO. AUTOMATIC REMOTE LIGHTING SAFETY PILOT SYSTEM WITH VARIABLE FLAME-HEIGHT REMOTE FOR NATURAL OR PROPANE GAS. Model APK-17(M)(P)
ROBERT H. PETERSON CO. Owner s Manual AUTOMATIC REMOTE LIGHTING SAFETY PILOT SYSTEM WITH VARIABLE FLAME-HEIGHT REMOTE FOR NATURAL OR PROPANE GAS FEATURES: CONTROL OPERATED ON/OFF VARIABLE FLAME-HEIGHT
More informationNatural Gas High-Altitude Conversion Kit For Installations in the United States (2,001 10,000 Feet)
Natural Gas High-Altitude Conversion Kit For Installations in the United States (2,001 10,000 Feet) INSTALLATION INSTRUCTIONS For R7 Series Light Commercial Packaged Gas Electric Units IIMPORTANT: Please
More informationOperator: Save these instructions for future use!
WHITE-RODGERS Type 36C67 Combination (24 Volt Models) INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING
More informationHigh Axial Load Capacity, High speed, Long life. Spherical Roller Bearings
High Axial Load Capacity, High speed, Long life Spheical Rolle eaings Spheical Rolle eaings High axial esistance load pefomance Intenal specifications have been optimized to geatly impove axial esistance
More informationOperating Instructions Compressors
MAXIMATOR HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT Opeating Instuctions Compessos issue 08.2007 MAXIMATOR GmbH Walkeniede Staße 15 D-37449 Zoge Gemany Telefon 0 55 86 / 803-0 Telefax
More information200 PSI COMPRESSORS - MODEL NUMBERS
200 PSI COMPRESSORS - MODEL NUMBERS 380C AIR COMPRESSOR KIT PART NO. 38033 480C AIR COMPRESSOR KIT PART NO. 48043 380C 480C IMPORTANT: It is essential that you and any other operator of this product read
More informationInstallation Instructions WARNING: WARNING: WARNING: LP AND HIGH ALTITUDE LP GAS CONVERSION KIT FOR UNITED STATES INSTALLATIONS
LP AND HIGH ALTITUDE LP GAS CONVERSION KIT FOR UNITED STATES INSTALLATIONS Installation Instructions For Model Series *G7/*GC2 Furnaces and Appliances Using Honeywell Gas Valves. BEFORE THE CONVERSION
More information420C AIR COMPRESSOR KIT PART NO C AIR COMPRESSOR KIT PART NO
420C AIR COMPRESSOR KIT PART NO. 42042 460C AIR COMPRESSOR KIT PART NO. 46043 420C 460C IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this
More information100C Air Compressor Kit
10010 100C Air Compressor (standard mounting bracket, CE Spec) 10014 100C Air Compressor (no leader hose or check valve, CE Spec) 10016 100C Air Compressor (with Omega Bracket, CE Spec) IMPORTANT: It is
More informationRCA2-RN3N-I A1-P-FL-** <Series> <Stroke> <Lead> RN4NA, RP4NA, RN3NA, RP3NA, GS4NA, GD4NA,
RCP3/RC ctuato Fist Step Guide Seventh Edition Thank you fo puchasing ou poduct. ake sue to ead the Safety Guide and detailed Instuction anual (CD/DVD) included with the poduct in addition to this Fist
More information36C/36D HSI, DSI Proven Pilot Gas Valves INSTALLATION INSTRUCTIONS
36C/36D HSI, DSI Proven Pilot Gas Valves INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING
More informationOperator: Save these instructions for future use!
WHITE-RODGERS 6C8-5 Combination Gas Control INSTALLATI INSTRUCTIS Operator: Save these instructions for future use FAILURE TO READ AND FOLLOW ALL INSTRUCTIS CAREFULLY BEFORE INSTALLING OR OPERATING THIS
More information10 Torque. Lab. What You Need To Know: Physics 211 Lab
b Lab 10 Toque What You Need To Know: F (a) F F Angula Systems Evey lab up to this point has dealt with objects moving in the linea system. In othe wods, objects moving in a staight line. Now we ae going
More informationOperator: Save these instructions for future use!
Pilot Gas Outlet: Located at outlet end of the valve Type of Gas Suitable for all domestic heating gases Pressure Rating: 1/2 lb. per sq. in. Pressure Regulator Adjust Range (Typical, See Control Label):
More informationVK8515M(R) MODULATING GAS CONTROL APPLICATION DESCRIPTION SPECIFICATIONS INSTRUCTION SHEET. Electrical data
VK8M(R) MODULATING GAS CONTROL INSTRUCTION SHEET Main gas connection Connections with G / external thread fitted with nuts according to ISO 8- in combination with applicable sealing(s) withstand the torsion
More informationACCESSORY KIT INSTALLATION INSTRUCTIONS
ACCESSORY KIT INSTALLATION INSTRUCTIONS 1NP0680 - PROPANE CONVERSION FOR USE WITH MODELS: PM8, PC8, PM9, PC9, FL9M, FL9C, FC9M, FC9C This conversion kit is to be installed by a qualified service agency
More informationMODEL 1000S DIGITAL TANK GAUGE
MODEL 1000S DIGITAL TANK GAUGE Installation Guide and Manual REVISION 5.0.0 2016 Resouce Poduction Co. Inc. 700 South Tucke Avenue Famington, NM 87401 1.800.382.1482 www.advancedtelemetics.net Advanced
More informationROBERT H. PETERSON CO.
ROBERT H. PETERSON CO. OWNER S INSTALLATION & OPERATING INSTRUCTIONS THE NEW OUTDOOR CAMPFYRE OCBE-34/OCBE-34P INSTALLATION AND OPERATING INSTRUCTIONS OWNER S MANUAL FOR OUTDOOR USE ONLY IMPORTANT: READ
More informationVR46.5V(A)/VR86.5V(A) SERIES
VR46.5V(A)/VR86.5V(A) SERIES COMACT COMBINATION GAS CONTROS WITH INTEGRATED 1:1 GAS/AIR REGUATOR FOR AUTOMATIC IGNITION SYSTEMS SECIFICATIONS INSTRUCTION SHEET Subject to change without notice. rinted
More information97C COMPRESSOR KIT 12V PART NO C COMPRESSOR KIT 24V PART NO C COMPRESSOR KIT PART NO
97C COMPRESSOR KIT 12V PART NO. 00097 97C COMPRESSOR KIT 24V PART NO. 02497 98C COMPRESSOR KIT PART NO. 00098 97C 98C IMPORTANT: It is essential that you and any other operator of this product read and
More informationOperator: Save these instructions for future use!
WHITE-RODGERS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CTROL COULD CAUSE PERSAL INJURY AND/OR PROPERTY DAMAGE.
More information42045 Heavy Duty ADA Base Model Kit: 85/105 PSI (ADA Compressor Only) Heavy Duty ADA Base Model Kit: 110/145 PSI (ADA Compressor Only)
42045 Heavy Duty ADA Base Model Kit: 85/105 PSI (ADA Compressor Only) 42047 Heavy Duty ADA Base Model Kit: 110/145 PSI (ADA Compressor Only) 45052 Constant Duty ADA Base Model Kit: 85/105 PSI (ADA Compressor
More informationIMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS CAUTION - To reduce risk of electrical shock: - Do not disassemble. Do not attempt repairs or modifications. Refer to qualified service agencies for all service and repairs.
More informationMODEL NUMBER: PSI AIR SOURCE KIT 200 PSI Compressor on 2.0 Gallon 200 PSI Air Tank
IMPORTANT SAFETY INSTRUCTIONS CAUTION - To reduce risk of electrical shock or Electrocution: MODEL NUMBER: 20008 200 PSI AIR SOURCE KIT 200 PSI Compressor on 2.0 Gallon 200 PSI Air Tank IMPORTANT: It is
More informationMODEL NUMBER: M20005 AIR SOURCE KIT. 30% Duty Compressor on. 2.0 Gallon Air Tank SAVE THIS MANUAL FOR FUTURE REFERENCE
MODEL NUMBER: M20005 AIR SOURCE KIT 30% Duty Compressor on 2.0 Gallon Air Tank SAVE THIS MANUAL FOR FUTURE REFERENCE USER MANUAL IMPORTANT SAFETY INSTRUCTIONS CAUTION - To reduce risk of electrical shock
More informationWARNING: Installation Instructions. Natural Gas High Altitude Conversion Kit United States Installations Only
Natural Gas High Altitude Conversion Kit United States Installations Only Installation Instructions Light Commercial Packaged Gas Electric Units R7TQ Series 6, - 7 1/2, & 10 Ton (2,001 FT - 10,000 FT)
More informationGAS FRYER Instruction Manual Model #5099NS
Part No. 89932 Revised: March 2004 GAS FRYER Instruction Manual Model #5099NS Cincinnati, OH 45241-4807 USA GAS SAFETY PRECAUTIONS GAS FUNNEL CAKE FRYER 2 MODEL #5099NS GAS FUNNEL CAKE FRYER SAFETY PRECAUTIONS
More informationDESCRIPTION PAGES DESCRIPTION PAGES DESCRIPTION PAGES DESCRIPTION PAGES
Hose Index Alphabetical Index DESCRIPTION PAGES DESCRIPTION PAGES DESCRIPTION PAGES DESCRIPTION PAGES A/C and Refigeation Hose 17 AQP Hose 13-14 Hose 20-57 Hydaulic 34-57 AQP 35, 36, 39, 40, 41, 45, 48,
More information/2004 US/CA
630 9765 0/004 US/CA For the contractor Propane Conversion Kit Instructions Sealed Combustion Gas Boiler Logano GA44 This kit and instructions are for converting the GA44 model boilers from Natural Gas
More informationOperator: Save these instructions for future use!
WHITE-RODGERS 36C53 Combination Gas Valves (24 Volt Model) INSTALLATI INSTRUCTIS Electrical Rating: Voltage: 24 Volts, (30 Volts Max.), 60 Hz. Current Rating: 0.23 Amps Type of Gas Natural Gas Pressure
More information250C-IG COMPRESSOR KIT 12V PART NO C-IG COMPRESSOR KIT 24V PART NO
250C-IG COMPRESSOR KIT 12V PART NO. 25050 250C-IG COMPRESSOR KIT 24V PART NO. 25058 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual
More informationUNIVERSAL GAS FRYER Instruction Manual Model #8065NS
Part No. 88847 Revised: August 2004 UNIVERSAL GAS FRYER Instruction Manual Model #8065NS Cincinnati, OH 45241-4807 USA GAS SAFETY PRECAUTIONS OPERATING INSTRUCTIONS UNPACKING AND ASSEMBLY After unpacking
More informationInstallation and Operation Instructions
Smoke and Heat Ventilation Pneumatic - Electonic Contol Systems Installation and Opeation Instuctions Vesion / SHEVS Contol Cente RWZ c K + G Pneumatik GmbH In de Kause 8 9 Eschweile Deutschland / Gemany
More informationinstallation instructions
installation instructions GAS CONVERSION KIT PROPANE-TO-NATURAL P/N 315572-71201 4GAD 6GAD Cancels: IIK 4G-50-4 IIK 4G-50-5 7/15/91 NOTE: Read the entire instructions before starting the installation.
More information250C-IG COMPRESSOR KIT 12V PART NO C-IG COMPRESSOR KIT 24V PART NO
250C-IG COMPRESSOR KIT 12V PART NO. 25050 250C-IG COMPRESSOR KIT 24V PART NO. 25058 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual
More informationGas Fired Residential Heating Boilers
USER S INFORMATION MANUAL Gas Fired Residential Heating Boilers Models 0042B, 0066B, 0090B, 0135B, 0180B Type H WARNING: If the information in this manual is not followed exactly, a fire or explosion may
More informationYour safety and the safety of others are very important.
NATURAL GAS TO PROPANE CONVERSION KIT ALPKT57- INSTALLATION INSTRUCTIONS PROPANE CONVERSION KIT SAFETY... INSTALLATION REQUIREMENTS... Tools and Parts... LP Gas Requirements... Table of Contents INSTALLATION
More informationInstallation Instructions
LP and High Altitude LP Gas Conversion Kit For United States Installations Installation Instructions For Model Series *G6/PGF1 Furnaces, *L1/PGC1 Furnaces, and *R4/PPG1 Gas/Electric Appliances using Honeywell
More informationACCESSORY KIT INSTALLATION MANUAL
ACCESSORY KIT INSTALLATION MANUAL LP (PROPANE) CONVERSION KIT 1NP0366 FOR USE WITH MODELS: G8C & GF8 This conversion kit shall be installed by a qualified service agency in accordance with these instructions
More informationMatlab Simulink Implementation of Switched Reluctance Motor with Direct Torque Control Technique
Matlab Simulink Implementation of Switched Reluctance Moto with Diect Toque Contol Technique Vikamaajan Jambulingam Electical and Electonics Engineeing, VIT Univesity, India. Abstact - The switched eluctance
More informationVR8345M Universal Electronic Ignition Gas Control
Universal Electronic Ignition Gas Control The VR8345M Universal Electronic Ignition Gas Control is used in gas-fired appliances with capacities up to 300 cu ft/hour at inch wc pressure drop [8.5 cu m/hour
More information200 PSI HIGH-FLOW AIR SOURCE KIT
200 PSI HIGH-FLOW AIR SOURCE KIT 50% Duty Compressor on 2.0 Gallon Air Tank PART NO. 20008 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of
More information200 PSI FAST-FILL AIR SOURCE KIT
200 PSI FAST-FILL AIR SOURCE KIT 55% Duty Compressor on 2.0 Gallon Air Tank PART NO. 20007 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of
More informationRobert H. Peterson Company
Robert H. Peterson Company LOW PROFILE SAFETY PILOT KIT For Natural or Propane Gas Owner s Manual INSTALLER: Please leave these instructions with the consumer. CONSUMER: Please retain for future reference.
More informationPerformance Characteristics of Parabolic Trough Solar Collector System for Hot Water Generation
Intenational Enegy Jounal: Vol. 7, No. 2, June 2006 137 Pefomance Chaacteistics of Paabolic Tough Sola Collecto System fo Hot Wate Geneation www.sed.ait.ac.th/eic A. Valan Aasu and T. Sonakuma Faculty
More informationUSER S INFORMATION MANUAL
USER S INFORMATION MANUAL UPFLOW, DOWNFLOW, UPFLOW/HORIZONTAL & HORIZONTAL ONLY INDUCED DRAFT GAS FURNACES Recognize this symbol as an indication of Important Safety Information If the information in this
More informationInstallation Instructions
48011HW NATURAL GAS TO PROPANE CONVERSION KIT 58HDX, 359AAV, PG9YAB, PG9YAA Installation Instructions SAFETY REQUIREMENTS Installing and servicing heating equipment can be hazardous due to gas and electrical
More informationGAS CONVERSION KIT Installation Instructions Range/Rangetop
GAS CONVERSION KIT Installation Instructions Range/Rangetop FOR SERVICE PERSONNEL ONLY IMPORTANT - READ ALL INSTRUCTIONS BEFORE YOU BEGIN THE INSTRUCTIONS HEREIN MUST ONLY BE PERFORMED BY A QUALIFIED SERVICE
More informationSSFU SUPER SPRAYFAST UNIVERSAL ADHESIVE APPLICATOR
S S F U SSFU SUPER SPRAYFAST UNIVERSAL ADHESIVE APPLICATOR MACHINERY DIVISION OWNER S MANUAL UNIT INSTRUCTIONS Please follow all SSFU Safety Instructions. Contact your Duro Dyne Tech Service if you have
More informationTypes 749B and R130 Changeover Manifolds
Instruction Manual MCK-1179 Types 749B and R130 June 2012 Types 749B and R130 Changeover Manifolds TYPE HSRL-749B TYPE 64SR/122 TYPE R130/21 TYPE 749B/21 Figure 1. Changeover Manifolds and Regulator Assemblies
More information444C DUAL PERFORMANCE VALUE PACK
(Chrome) PART NO. 44432 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before installing and using this product. SAVE THIS MANUAL
More informationGEN-1e CO2 Generator OVERVIEW INSTALLATION PROPANE GENERATORS ONLY NATURAL GAS GENERATORS ONLY
GEN-1e CO2 Generator Custom Automated Products offers economical and safe carbon dioxide generators. They produce CO2 by burning either propane or natural gas. We have designed our CO2 generator to allow
More information400H HARDMOUNT AIR COMPRESSOR KIT PART NO H HARDMOUNT AIR COMPRESSOR KIT PART NO
400H HARDMOUNT AIR COMPRESSOR KIT PART NO. 40042 450H HARDMOUNT AIR COMPRESSOR KIT PART NO. 45042 400H 450H IMPORTANT: It is essential that you and any other operator of this product read and understand
More informationV5197A. Firing Rate Gas Valve APPLICATION FEATURES PRODUCT HANDBOOK
V5197A Firing Rate Gas Valve PRODUCT HANDBOOK APPLICATION The V5197A are firing rate valves used to provide variable flow control of air, natural gas, liquefied petroleum (LP), and manufactured gases.
More informationDesign Engineering Challenge: The Big Dig Contest Platter Strategies: Ball Liberation
Poblem Set 4: Unifom Cicula Motion Design Engineeing Challenge: The Big Dig.007 Contest Platte Stategies: Ball Libeation Oeall Notes: You ae not equied to pefom the actual analysis in this poblem set,
More informationExperiment #10 Bio-Physics Pre-lab Questions
Expeient #10 Bio-Physics Pe-lab Questions ** Disclaie: This pe-lab is not to be copied, in whole o in pat, unless a pope efeence is ade as to the souce. (It is stongly ecoended that you use this docuent
More information400C & 450C DUAL PERFORMANCE VALUE PACKS
(Chrome) PART NO. 40013 (Silver) PART NO. 45012 (Chrome) PART NO. 45013 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before
More information