Visit our Web site: http: //

Size: px
Start display at page:

Download "Visit our Web site: http: //"

Transcription

1 CONTENTS: Medium Duty Victor Style Welding And Cutting Outfit MANUFACTURED BY AN ISO 9001 REGISTERED FIRM Visit our Web site: http: //

2 TABLE OF CONTENTS Page INTRODUCTION... 1 SECTION 1: GENERAL SAFETY INFORMATION... 2 The Work Area... 2 Protective Apparel... 2 Fire Prevention... 2 SECTION 2: INDUSTRIAL GASES... 4 Oxygen... 4 Acetylene... 4 MAPP R Gas...6 Natural Gas and Propane... 7 Propylene and Propylene Based Fuel Gases... 8 Fuel Gases with Natural Gas or Propane Base Plus Liquid Hydrocarbon Additive... 8 SECTION 3: OXY-FUEL APPARATUS... 9 Description/Function... 9 Oxygen and Fuel Supply... 9 Regulators... 9 Hose Torch Handle Flashback Arrestors Cutting Attachment Cutting Tip Welding Nozzle Multi-Flame Heating Nozzle SECTION 4: SETTING UP EQUIPMENT FOR WELDING...17 Cylinders Regulators Turning On the Cylinders Welding Hoses Torch Handle Welding Nozzle Multi-Flame Heating Nozzles Leak Testing the System Setting UP to Weld; Lighting the Torch and Adjusting the Flame SECTION 5: WELDING PROCEDURES Preparing the Metals to be Welded Forehand and Backhand Welding Techniques Starting and Finishing the Weld When You Finish Your Welding Operation Oxy-Fuel Brazing and Braze Welding Preparing the Metals to be Brazed Setting Up for Brazing Applications Brazing Sheet Steel When You Finish Your Brazing Operation i

3 Page SECTION 6: SETTING UP EQUIPMENT FOR CUTTING Setting Up for Cutting Applications...33 Starting a Cut by Piercing When You Finish Your Cutting Operation OXY-FUEL CUTTING REFERENCE CHART NOZZLE AND TIP CHARTS GLOSSARY ii LIST OF ILLUSTRATIONS Figure No. Description Page 1 Acetylene Cylinder Interior Regulator Parts Torch Handle Parts Cutting Attachment Parts Cutting Tip Welding Nozzle Securing the Cylinder Inspecting the Regulator and Cylinder Valve Cracking the Cylinder Valve Tightening the Regulator Opening the Cylinder Valve Connecting the Reverse Flow Check Valves Connecting the Hose Connecting the Hose to the Torch Handle Connecting the Welding Nozzle to Torch Handle Setting Operating Pressures Lighting the Torch Adjusting the Flame Acetylene Welding Flames Preparing the Metal Forehand and Backhand Welding Starting and Finishing the Weld Characteristics of Good and Bad Welding Joints Connecting the Cutting Attachment to the Torch Handle Tightening the Tip Nut Starting the Cut Cutting Starting to Pierce Piercing Recommended Procedures for Efficient Flame Cutting Cutting by Piercing...38

4 1

5 2

6 3

7 4 49

8 48 5

9 6 47

10 46 7

11 8 45

12 CUTTING TIP GPN STYLE Regulators High Pressure Gauge Low Pressure Gauge Inlet Connection Filter 44 Outlet Connection Adjusting Screw Relief Valve 9 Figure 2, Regulator Parts

13 CUTTING TIP 101 STYLE 10 43

14 Torch Head Control Valves and bode Y 42 Barrel 11 Figure 3, Torch Handle Parts

15 12 41

16 Cutting Oxygen Lever Cutting Attachment Head Cone End Mixing Chamber Coupling Nut Preheat Oxygen Control Valve Figure 4, Cutting Attachment Parts 40 13

17 Cutting Attachment Head 14 39

18 Welding Tip Coupling Nut Mixer 38 15

19 16 37

20 36 17

21 Figure 8, Inspecting the Cylinder and Cylinder Valve Figure 9, Cracking the Cylinder Valve

22 Figure 25, Tightening the Tip Nut WARNING If the torch handle and hoses are already connected to the regulators, the system MUST still be purged after every shut-down. Open the oxygen valve 1/2 turn. Allow the gas to flow ten seconds for tips up to size 3 and 5 seconds for sizes 4 and larger for each 25 feet of hose in the system. Close the oxygen valve. Purge the fuel system in the same manner Figure 10, Tightening the Regulator

23 Figure 11, Opening the Cylinder Valve Figure 24, Connecting Cutting Attachment to Torch Handle

24 Figure 12, Connecting the Reverse Flow Check Valves 32 21

25 CORRECT WELD CONTOUR Figure 13, Connecting the Hose 22 31

26 Figure 14, Connecting the Hose to the Torch Handle When You Finish Your Welding Operation Figure 15, Connecting the Welding Nozzle to Torch Handle

27 24 29

28 Figure 16, Setting Operating Pressures Figure 17, Lighting the Torch

29 26 27

OXY FUEL SYSTEM SET UP & SHUT DOWN PROCEDURE CHECKLIST ACETYLENE FUEL GAS

OXY FUEL SYSTEM SET UP & SHUT DOWN PROCEDURE CHECKLIST ACETYLENE FUEL GAS OXY FUEL SYSTEM SET UP & SHUT DOWN PROCEDURE CHECKLIST ACETYLENE FUEL GAS Items needed for demonstrations: Fire extinguisher PPE (Personal Protective Equipment): o Lab coats/welding jackets o Leather gloves

More information

NEW Edge Series Products: OUTFITS and REGULATORS

NEW Edge Series Products: OUTFITS and REGULATORS NEW Edge Series Products: OUTFITS and REGULATORS NOW Including ESS3 Models and More Edge Series Outfits User Friendly Advanced Design Outstanding Flow Performance Unsurpassed Safety www.victoredge.com

More information

Safe Work Instructions For Oxygen Acetylene Equipment

Safe Work Instructions For Oxygen Acetylene Equipment Safe Work Instructions For Oxygen Acetylene Equipment Policy Sponsor: Assistant Vice President Facilities Management Responsible Unit: Trade Services Approval Date: September 2010 Revisions: January 2018

More information

CUTTING TORCH SAFETY. The Safe Use and Handling of OXY Fuel Cutting, Welding, and Heating Equipment

CUTTING TORCH SAFETY. The Safe Use and Handling of OXY Fuel Cutting, Welding, and Heating Equipment CUTTING TORCH SAFETY The Safe Use and Handling of OXY Fuel Cutting, Welding, and Heating Equipment Introduction Safe operation for the use of gas cutting, heating and welding requires a clear understanding

More information

INSTRUCTION MANUAL For Gas Welding, Cutting, Brazing & Heating Torches.

INSTRUCTION MANUAL For Gas Welding, Cutting, Brazing & Heating Torches. THE HARRIS PRODUCTS GROUP INSTRUCTION MANUAL For Gas Welding, Cutting, Brazing & Heating Torches. IMPORTANT: For your own safety read these instructions. Failure to do so can lead to serious injury. www.harrisproductsgroup.com.au

More information

BRAZING & CUTTING. Kits Easy To Use

BRAZING & CUTTING. Kits Easy To Use BRAZING & CUTTING Kits Easy To Use Easy to use kits fully or partly (equipped with quick connections) assembled kits for brazing (kits no. 1 and no. 2) or cutting (kits no. 3 and no. 4). HIGH QUALITY PRODUCED

More information

PRESSURE CONTROL REGULATORS

PRESSURE CONTROL REGULATORS REGULATOR HARRIS STYLE SINGLE STAGE 201 Series Medium Duty Single stage construction Forged brass body for maximum strength Chrome bonnet Neoprene diaphragms Sintered metal inlet filter to trap impurities

More information

OXYGEN ACETYLENE WELDING & CUTTING EQUIPMENT

OXYGEN ACETYLENE WELDING & CUTTING EQUIPMENT OXYGEN ACETYLENE WELDING & CUTTING EQUIPMENT Introduction: The oxy-acetylene torch can be used for various tasks. It can be used for cutting steel, welding steel, brazing and for heating metal. The oxy-acetylene

More information

Oxy-Fuel Safety Training. Participant s Guide

Oxy-Fuel Safety Training. Participant s Guide Oxy-Fuel Safety Training Page 1 of 19 Contents What s Included?... 3 Oxy-Fuel Safety Training Objectives... 4 Chapter 1: Safety & Responsibility... 6 Chapter 2: Gases in the Work Area... 7 Chapter 3: Equipment

More information

SAFETY AND OPERATION MANUAL

SAFETY AND OPERATION MANUAL SAFETY AND OPERATION MANUAL Congratulations on purchasing the GASPONY 1 Portable Welding/Cutting Outfit! This manual is designed to help you get the most out of your GASPONY 1. CAREFULLY REVIEW ALL SAFETY

More information

Safety, Set-Up, and Operating Instructions

Safety, Set-Up, and Operating Instructions Read all Instruction, SAVE THESE INSTRUCTION Safety, Set-Up, and Operating Instructions Gas Welding, Cutting, Brazing & Heating There are many hazards to be considered when using oxy-fuel welding, cutting,

More information

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS OXYGEN/ACETYLENE CUTTING AND WELDING KIT ! WARNING: There are a number of inherent hazards in the use of oxy-fuel welding and cutting apparatus. It is therefore necessary that proper

More information

Machine Cutting Torches Series 4700

Machine Cutting Torches Series 4700 ADI 1580-E Certified ISO 9000 Machine Cutting Torches Series 4700 INSTRUCTIONS Before Installing, Operating or Servicing Read and Comply With These Instructions This symbol on the product means the product

More information

Welding. Module

Welding. Module Welding Module 19.2.4 Module 19.2.4 Describe the oxy fuel gas welding process. Process: setting up the equipment, leak testing, oxy-fuel gas mixing, flame adjustment (including oxidizing, neutral and carburizing

More information

Weld/Braze Tip Data. IMPORTANT: Use proper type of tip for each type torch. Airc o. N U M B E R Dril l Siz e. D E C I M A L Size

Weld/Braze Tip Data. IMPORTANT: Use proper type of tip for each type torch. Airc o. N U M B E R Dril l Siz e. D E C I M A L Size Note: This data has been compiled by Uniweld...We share this information and acknowledge that Uniweld s information is to the best of its ability for accuracy. Please use safe practices when welding, cutting

More information

Genuine. Kit includes: This kit contains CIGWELD s Genuine COMET 700 Oxygen and Acetylene Regulators, Blowpipe and Cutting Attachment.

Genuine. Kit includes: This kit contains CIGWELD s Genuine COMET 700 Oxygen and Acetylene Regulators, Blowpipe and Cutting Attachment. Gas Kits These kits contain CIGWELD s renowned COMET Regulators, Blowpipe and Cutting Attachment. COMET Custom Kit COMET Regulators Independently certified to AS4267 (COMET TM 700 & 500 Oxygen & Acetylene

More information

Mastar Outfits KL550-TR KL550-4P-T

Mastar Outfits KL550-TR KL550-4P-T Ranked #1 for Commercial Refrigeration Technicians Mastar Highly rated by commercial refrigeration technicians, Mastar outfits contain all the necessary top of the line components for welding, cutting

More information

oxyacetylene welding/cutting torch set

oxyacetylene welding/cutting torch set instructions for oxyacetylene welding/cutting torch set model no: SGA2.V2 & SGA6.V2 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these

More information

TIPS Oxyfuel advice from the Annual Ironworker Instructor Training Program

TIPS Oxyfuel advice from the Annual Ironworker Instructor Training Program TIPS Oxyfuel advice from the Annual Ironworker Instructor Training Program by Travis Ham, senior product manager, gas equipment, ESAB, Victor Technologies During the week of July 18, a team of ESAB experts

More information

BRITISH COMPRESSED GASES ASSOCIATION Registered office: 4a Mallard Way, Pride Park, Derby, UK. DE24 8GX Company Number: 71798, England

BRITISH COMPRESSED GASES ASSOCIATION Registered office: 4a Mallard Way, Pride Park, Derby, UK. DE24 8GX Company Number: 71798, England BRITISH COMPRESSED GASES ASSOCIATION Registered office: 4a Mallard Way, Pride Park, Derby, UK. DE24 8GX Company Number: 71798, England www.bcga.co.uk TECHNICAL INFORMATION SHEET 29 OXY-FUEL GAS EQUIPMENT

More information

A guide to Part 10 of the

A guide to Part 10 of the OCCUPATIONAL HEALTH AND SAFETY DIVISION Welding, Cutting, Burning and Soldering A guide to Part 10 of the Occupational Safety General Regulations October 2007 A GUIDE TO PART 10 WELDING, CUTTING, BURNING

More information

TRADE OF HEAVY VEHICLE MECHANIC

TRADE OF HEAVY VEHICLE MECHANIC TRADE OF HEAVY VEHICLE MECHANIC PHASE 2 Module 1 Induction/Customer Care/Bench Fitting/Welding UNIT: 5 Table of Contents Aims and Objectives... 1 Learning Outcome:... 1 Setting up an Oxyacetylene torch...

More information

Working Environment Safety Assessment

Working Environment Safety Assessment For your own safety and/or safety of your workforce, and to improve the efficiency of your business practices, you should be aware of, and be up to date with, the key safety issues and good practices relevant

More information

Chiyoda's High-Pressure Gas Control System and Equipment

Chiyoda's High-Pressure Gas Control System and Equipment Chiyoda's High-Pressure Gas Control System and Equipment 2012 CHIYODA HELPS YOUR GAS RELATED JOBS... Since the establishment 1946, we started as a manufacturer of Gas Welding & Cutting Equipment. Nowadays

More information

How Flashback Arrestors Work

How Flashback Arrestors Work What are Flashback Arrestors Flashback Arrestors prevent reverse flow of gases with built-in check valves and extinguishes flashback fire with a stainless steel sintered element. How Flashback Arrestors

More information

welding torches [all models]

welding torches [all models] OPERATING INSTRUCTIONS welding torches [all models] WARNING! READ CAREFULLY AND COMPLETELY BEFORE USING EQUIPMENT. KEEP FOR REFERENCE. NOTICE: throughout this publication, Dangers, Warning and Cautions

More information

Wilkins Safety Group

Wilkins Safety Group Gas Welding INTRODUCTION Welding is the union of pieces of metal by fusing the opposing surfaces that have been made molten by heat. Processes similar to welding include brazing and soldering. Allied processes

More information

BRAZING EQUIPMENT PORTAPAK KIT

BRAZING EQUIPMENT PORTAPAK KIT BRAZING EQUIPMENT PORTAPAK KIT Portapak Trolley Single Stage 2 Gauge Acetylene Regulator Single Stage 2 Gauge Oxygen Regulator Acetylene Flashback Arrestor Oxygen Flashback Arrestor 5 Meter Oxy / Acetylene

More information

What is Oxy-Fuel Welding?

What is Oxy-Fuel Welding? Oxy-Fuel Welding What is Oxy-Fuel Welding? Process the fuses metal together Does not require electricity Uses a torch and filler rod Similar equipment as Oxy-Fuel Cutting Where is Oxy-Fuel Welding used?

More information

Medium-Duty Oxy-Acetylene Cutting and Welding Outfit

Medium-Duty Oxy-Acetylene Cutting and Welding Outfit OM-251 341B 2013 12 Processes Oxy-Fuel Welding and Cutting Description Accessory Medium-Duty Oxy-Acetylene Cutting and Welding Outfit 770 502 www.hobartwelders.com File: Accessory TABLE OF CONTENTS SECTION

More information

INSPECTION of PORTABLE and OXY FUEL GAS SYSTEMS

INSPECTION of PORTABLE and OXY FUEL GAS SYSTEMS 1.0 PURPOSE This work Instruction describes the procedure for the inspection, testing and identification requirements of portable and mobile oxy-fuel gas systems for welding, cutting, heating to ensure

More information

fig.1 Instructions for: Gas welding/cutting kit

fig.1 Instructions for: Gas welding/cutting kit Instructions for: Gas welding/cutting kit MOdel No: SGA1.v3 Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly

More information

PROPYLENE HEATING, BRAZING & WELDING

PROPYLENE HEATING, BRAZING & WELDING HEATING, BRAZING & WELDING Technical Data Sheets Heating Equipment HD HEATING HEADS *HD-1 *HD-2 *HD-3 *HD-4 *HD-5 435 105 63 27 Brazing Equipment Ph: 281-471-2200 Fx : 281-471-2201 18005 E Hwy 225 La Porte,

More information

ASSEMBLY & OPERATIONS MANUAL. Straight & Clean Torch Cuts. Every Time.

ASSEMBLY & OPERATIONS MANUAL. Straight & Clean Torch Cuts. Every Time. ASSEMBLY & OPERATIONS MANUAL Straight & Clean Torch Cuts. Every Time. CAUTION ALWAYS USE FLASH BACK ARRESTORS (purchased separately) READ THIS BOOK THOROUGHLY AND FOLLOW INSTRUCTIONS! FAILURE TO USE OSHA

More information

Cutting Tip SC12-1 SC12-2 SC12-1 SC12-2 SC12-1 SC12-2 SC12-1 SC12-2 SC12-1 SC12-2. Welding Tips. Heating Tip. Part No. HTA

Cutting Tip SC12-1 SC12-2 SC12-1 SC12-2 SC12-1 SC12-2 SC12-1 SC12-2 SC12-1 SC12-2. Welding Tips. Heating Tip. Part No. HTA Smith Equipment American Classic Heavy Duty, Welding & Outfits Cuts up to 8"- Welds up to /2" These premium heavy duty outfits feature Smith s proven in-tip gas mixing technology and include torch mount

More information

WELDING & CUTTING FIRE PROTECTION SAFETY 1 NAVFAC

WELDING & CUTTING FIRE PROTECTION SAFETY 1 NAVFAC WELDING & CUTTING FIRE PROTECTION SAFETY 1 NAVFAC BASIC TYPES OF WELDING ARC WELDING 2 NAVFAC OXY/ACETYLENE OR FUEL GAS WELDING FUEL GASES USED FOR HEATING & CUTTING OPERATIONS 3 MAJOR TYPES 1. P GAS {Propane}

More information

Tamper proof, self reseating internal safety

Tamper proof, self reseating internal safety GAS EQUIPMENT REGULATORS GENERAL FEATURES Regulators: Harris regulators are designed and manufactured according to the most recent international standards: - ISO 2503 for cylinder pressure regulators for

More information

COMMERCIAL ITEM DESCRIPTION TORCHES, OXYACETYLENE, HAND HELD, CUTTING AND WELDING

COMMERCIAL ITEM DESCRIPTION TORCHES, OXYACETYLENE, HAND HELD, CUTTING AND WELDING INCH-POUND 2 July 2010 SUPERSEDING A-A-55826 5 September 1996 COMMERCIAL ITEM DESCRIPTION TORCHES, OXYACETYLENE, HAND HELD, CUTTING AND WELDING The General Services Administration has authorized the use

More information

Cutting. Heating. Welding. OxyFuel Brochure

Cutting. Heating. Welding. OxyFuel Brochure utting Heating Welding Brochure System Solutions Firepower Products Victor Technologies, a leader in metal cutting, gas control and specialty welding solutions, is meeting the needs of people who demand

More information

V-24 OXYGEN LANCE VALVE

V-24 OXYGEN LANCE VALVE INSTRUCTIONS for F-4737-U May, 2009 V-24 OXYGEN LANCE VALVE w/ C -Size Inlet w/ B -Size Inlet V-24 Oxygen Lance with 1/8" Pipe Holder... 9728D65... 2218939 V-24 Oxygen Lance with 1/4" Pipe Holder... 9728A65...

More information

PARTS, SERVICE & REPAIR BULLETIN

PARTS, SERVICE & REPAIR BULLETIN CA4- PARTS, SERVICE & REPAIR BULLETIN 400 SERIES HEAVY DUTY CUTTING ATTACHMENT, TIP SERIES Manual No: 0056-379 Issue Date: August 2, 203 Revision: AB VictorTechnologies.com Table of Contents SECTION :

More information

4 Machine maintenance and repair

4 Machine maintenance and repair 3.3 lift device consists of: lift motor, lead screw, guide rod, lifting seat Lift motor Lead screw Guide rod Lifting seat Diagram 3.3 3.4 torch holder set The torch holder consist of holder connection,

More information

EXOTHERMIC TORCH ADAPTER. Instruction Manual

EXOTHERMIC TORCH ADAPTER. Instruction Manual EXOTHERMIC TORCH ADAPTER Instruction Manual CAUTION FLAME TECH ALWAYS RECOMMENDS USING FLASH BACK ARRESTORS (must purchase separately) Pre-operation Checklist Before you begin, the following routine checks

More information

OXYGEN & ACETYLENE: Safety & Handling for these Highly Combustible Gases

OXYGEN & ACETYLENE: Safety & Handling for these Highly Combustible Gases OXYGEN & ACETYLENE: Safety & Handling for these Highly Combustible Gases TRAINING SOURCE: Safety Division, Central Welding Supply, www.centralwelding.com Oxygen & Acetylene Safety Topics covered Oxygen:

More information

Product Catalogue 2018

Product Catalogue 2018 Product Catalogue 2018 Oxy-fuel Cutting and Welding Technology Mechanische Werkstätten Wurzen GmbH Oxy-fuel Cutting and Welding Technology Mould and Tool Production Oxy-fuel Cutting and Welding Technology

More information

WELDING TOOLS AND ACCESSORIES

WELDING TOOLS AND ACCESSORIES WELDING TOOLS AND ACCESSORIES WELDING TOOLS AND ACCESSORIES Hoses / Automatic roller for oxygas hoses.............................................. 89 Quick action coupling.................................................................

More information

Gas Apparatus

Gas Apparatus Gas Apparatus www.airliquide.ca -800-87-7697 Gas Apparatus Put safety first in gas welding and cutting applications Important Product Safety Recommendations Before use, safely secure cylinders to a wall

More information

Tri-Safem Model I1 Regulator. INSTRUCTIONS and PARTS

Tri-Safem Model I1 Regulator. INSTRUCTIONS and PARTS Tri-Safem Model I1 Regulator INSTRUCTIONS and PARTS USER RESPONSIBILITY This equipment will perform in conformity with the description thereof contained In this manual and accompanying labels andlor inserts

More information

SAFETY POLICY AND PROCEDURE MANUAL All Euramax Subsidiaries. Number K-3.0 Welding Safety Procedures

SAFETY POLICY AND PROCEDURE MANUAL All Euramax Subsidiaries. Number K-3.0 Welding Safety Procedures Number K-3.0 Issued: 1/2009 Revised: 3/2016 Page 1 of 3 1.0 PURPOSE: To standardize procedures associated with production and maintenance welding and to minimize the potential risk of accident or injury

More information

NEW EDGE SERIES REGULATORS & OUTFITS

NEW EDGE SERIES REGULATORS & OUTFITS WE LISTENED. WE DELIVERED. NEW EDGE SERIES REGULATORS & OUTFITS Victor Introduces the Newest Addition to the EDGE Series: The EHP3 High Pressure Regulator. EDGE Regulators Now Include These Models EHP3

More information

Brazing. Turn up the. When brazing and soldering, most HVACR technicians

Brazing. Turn up the. When brazing and soldering, most HVACR technicians Turn up the Brazing Heat A discussion about oxygen/acetylene vs. air/acetylene torches, including applications, comparisons, and base and filler metal suggestions. B y B o b H e n s o n a n d M i k e S

More information

Cal/OSHA T8 CCR 1536 Cal/OSHA T8 CCR 4799 Cal/OSHA T8 CCR 4845 Cal/OSHA T8 CCR 4848

Cal/OSHA T8 CCR 1536 Cal/OSHA T8 CCR 4799 Cal/OSHA T8 CCR 4845 Cal/OSHA T8 CCR 4848 Cal/OSHA Gas Systems for Welding GAS WELDING Cal/OSHA T8 CCR 1536 Cal/OSHA T8 CCR 4799 Cal/OSHA T8 CCR 4845 Cal/OSHA T8 CCR 4848 When performing gas welding, the following precautions, work procedures,

More information

C-66 CUTTING TORCHES

C-66 CUTTING TORCHES INSTRUCTIONS for F-805-R May, 2001 C-66 CUTTING TORCHES Cutting Range using any fuel gas except acetylene... 1/8"-20" Cutting Nozzels... 1500 series Torch-Hose Connections... Oxy. CGA-022 (9/16" 18) F.G.

More information

UNDER A SPECIFIC HEAT PROCESS, two pieces of material

UNDER A SPECIFIC HEAT PROCESS, two pieces of material Applying Fuel Gas Welding (FGW) Processes and Techniques UNDER A SPECIFIC HEAT PROCESS, two pieces of material can be fused or joined together. This is the principal function of ing. Metal is commonly

More information

Process gas requirements (Core, VWI, and OptiMix gas connect consoles)

Process gas requirements (Core, VWI, and OptiMix gas connect consoles) Process gas requirements (Core, VWI, and OptiMix gas connect consoles) You must supply the process gases and supply gas plumbing for your cutting system. See Table 7 on page 46 for supply gas quality,

More information

Foundations of Agriculture

Foundations of Agriculture Foundations of Agriculture Auto body and Restoration Repairs on small parts Portable welding OAW was the first type of portable welder Acetylene is mixed with oxygen in correct proportions and ignited.

More information

cutting torches [all models]

cutting torches [all models] OPERATING INSTRUCTIONS cutting torches [all models] WARNING! READ CAREFULLY AND COMPLETELY BEFORE USING EQUIPMENT. KEEP FOR REFERENCE. NOTICE: throughout this publication, Dangers, Warning and Cautions

More information

Typical Single Stage Design SR 450 Series Shown. Two stage regulators add the following in addition to the features listed above:

Typical Single Stage Design SR 450 Series Shown. Two stage regulators add the following in addition to the features listed above: Single Stage : Recommended for applications where slight delivery pressure increases (due to decreasing cylinder pressures) would not affect the performance characteristics of the work or test results.

More information

CW-23, CW-23/FG-2, & CW-24-R CUTTING ATTACHMENTS

CW-23, CW-23/FG-2, & CW-24-R CUTTING ATTACHMENTS INSTRUCTIONS for CW-23, CW-23/FG-2, & CW-24-R CUTTING ATTACHMENTS F-3135-O March, 2001 These INSTRUCTIONS are for experienced operators. If you are not fully familiar with the principles of operation and

More information

CUTTING AND WELDING TORCHES HANDLES

CUTTING AND WELDING TORCHES HANDLES INSTRUCTIONS MANUAL GALA SOL, S.A. FABRICA DE APARATOS Y MAQUINAS DE SOLDADURA Y CORTE AUTOGENOS C/ ALBARRACIN 25-27 TFNO.: 976 513 055 FAX: 976 515 303 50015 ZARAGOZA e-mail: galasol@galasol.com GALA

More information

INSTRUCTION MANUAL. Models: OX2550KC WK5500OX DO NOT DISCARD THESE WARNINGS AND INSTRUCTIONS

INSTRUCTION MANUAL. Models: OX2550KC WK5500OX DO NOT DISCARD THESE WARNINGS AND INSTRUCTIONS DANGER INSTRUCTION MANUAL OXY-MAP Torches Models: OX2550KC WK5500OX EXTREMELY FLAMMABLE GASES USED WITH TORCH FIRE/EXPLOSION HAZARD CARBON MONOXIDE HAZARD This Oxygen Cutting and Welding Torch is unlike

More information

Torches, Outfits & Accessories

Torches, Outfits & Accessories 150 SERIES OXY-ACETYLENE OUTFITS 0384-05 These user friendly outfits offer a complete system for smaller welding and cutting jobs. The 150 series is best suited for autobody repair, motor enthusiasts,

More information

PARTS, SERVICE & REPAIR BULLETIN

PARTS, SERVICE & REPAIR BULLETIN WH4C PARTS, SERVICE & REPAIR BULLETIN 400 SERIES HEAVY DUTY WELDING HANDLE Manual No: 0056-3763 Issue Date: October 07, 03 Revision: AA VictorTechnologies.com Table of Contents SECTION : GENERAL SAFETY

More information

Air-Propane Equipment QUALITY GAS EQUIPMENT.

Air-Propane Equipment QUALITY GAS EQUIPMENT. Air-Propane Equipment QUALITY GAS EQUIPMENT www.tesuco.com.au Combination Chart SNT1000 SNT600 M20 x 1 SNT220 SSB80-SPX SNT75 M20 x 1 SNTBSB7 SNTBSB5 SNTBSB3 SSB80 SBM2B SNTBT28M SNTBT22M M14 x 1 SNTBT18M

More information

SAFETY BULLETIN 01/05

SAFETY BULLETIN 01/05 SAFETY BULLETIN 01/05 ASIA INDUSTRIAL GASES ASSOCIATION 3 HarbourFront Place, #09-04 HarbourFront Tower 2, Singapore 099254 www.asiaiga.org Safe use of acetylene This document is for people who use acetylene

More information

OPERATING ENGINEERS NATIONAL HAZMAT PROGRAM

OPERATING ENGINEERS NATIONAL HAZMAT PROGRAM OPERATING ENGINEERS NATIONAL HAZMAT PROGRAM INTERNATIONAL ENVIRONMENTAL TECHNOLOGY & TRAINING CENTER FRAMATOME TECHNOLOGIES VICTOR OXY-ACETYLENE TORCH (Equipment Dismantlement) HUMAN FACTORS ASSESSMENT

More information

U.S. CONCRETE, INC. SAFETY POLICY and PROCEDURE MANUAL

U.S. CONCRETE, INC. SAFETY POLICY and PROCEDURE MANUAL SAFE -14 Page 1 of 8 U.S. CONCRETE, INC. SAFETY POLICY and PROCEDURE MANUAL FUNCTION Safety TOPIC Hotwork Permit Program OBJECTIVE(S): GENERAL POLICY: To provide a work atmosphere that is conducive to

More information

WELDING, CUTTING AND BRAZING

WELDING, CUTTING AND BRAZING - 1 - WELDING, CUTTING AND BRAZING Are only authorized and trained personnel permitted to use welding, cutting or brazing equipment? Does each operator have a copy of the appropriate operating instructions

More information

Trade of Plumbing. Module 1: Thermal Process and Mild Steel Pipework Unit 9: Oxy-Acetylene Welding Safety and Plant Phase 2

Trade of Plumbing. Module 1: Thermal Process and Mild Steel Pipework Unit 9: Oxy-Acetylene Welding Safety and Plant Phase 2 Trade of Plumbing Module 1: Thermal Process and Mild Steel Pipework Unit 9: Oxy-Acetylene Welding Safety and Plant Phase 2 Table of Contents List of Figures... 5 List of Tables... 6 Document Release History...

More information

flashback arrestors Regulator end

flashback arrestors Regulator end flashback arrestors Regulator end Regulator end flashback arrestors are safety devices fitted to the outlet of a regulator. They incorporate a number of features designed to protect upstream equipment

More information

Description. Lesson Outcomes. Assumptions. Terminology. Welding. Automotive

Description. Lesson Outcomes. Assumptions. Terminology. Welding. Automotive Description Oxyacetylene or fusion welding is one of the oldest methods of joining metal. Oxyacetylene welding equipment is very common in an automotive shop and has many uses. It is most often used to

More information

MillerWelds.com A-Miller ( )

MillerWelds.com A-Miller ( ) As the leader in welding and cutting technology, Miller has always made it a top priority to provide the very best solutions to the industry no matter how challenging the application. With that very principle

More information

Operating manual. LINDOFLAMM Acetylene special burner LF-H series.

Operating manual. LINDOFLAMM Acetylene special burner LF-H series. Operating manual. LINDOFLAMM Acetylene special burner LF-H series. 02 Operating manual. LINDOFLAMM acetylene special burner. This operating manual is valid for the following models LF-H-4, 6, 8 and 16:

More information

Gas Welding Hoses and connections, the weak link

Gas Welding Hoses and connections, the weak link Gas Welding Hoses and connections, the weak link By Leif Andersen, Technical Product Manager Welding, WSS Regulators with flashback arrestors and the shank with its welding or cutting attachment are made

More information

INSTRUCTIONS FOR SCORPION TORCHES

INSTRUCTIONS FOR SCORPION TORCHES GLASS TORCH TECHNOLOGIES, INC. 55 N. Main Street Tioga, Pa. 16946 (570) 835-9777 gtt@glasstorchtech.com www.glasstorchtech.com INSTRUCTIONS FOR SCORPION TORCHES To Attach your Lines to the Torch: The Fuel

More information

TRAINING TASK 1- for regional heat skill competition

TRAINING TASK 1- for regional heat skill competition TRAINING TASK 1- for regional heat skill competition General Information Standards Complete the task within 2 hrs. The standard of work required to gain maximum marks are: it yourself or ask a fellow student

More information

KTIndustries.net. Medium Duty Kit with Cylinders USER S MANUAL. and Portable Carrying Tote

KTIndustries.net. Medium Duty Kit with Cylinders USER S MANUAL. and Portable Carrying Tote USER S MANUAL Medium Duty Kit with Cylinders and Portable Carrying Tote For K-T 31-5009 KTIndustries.net DOT Cylinder Included Warning: Read and understand all instructions before using! Severe personal

More information

Universal grips. Flaming slabs

Universal grips. Flaming slabs Devices for flaming 3 Universal grips - LEM LEM/S grip The LEM/S universal grip is compatible with HB, MPS, MPT, SECUR/2000 and RF/2000 lances. LEM/S grip M0007 LENGTH WEIGHT M0007 245 mm 0,5 kg Flaming

More information

One Piece Cutting Torch. Cuts 300 mm QUALITY GAS EQUIPMENT.

One Piece Cutting Torch. Cuts 300 mm QUALITY GAS EQUIPMENT. One Piece Cutting Torch Cuts 300 mm QUALITY GAS EQUIPMENT www.tesuco.com.au Cuts 300 mm Key Features Gas specific injector designed for maximum efficiency For cutting up to 300 mm and for gouging applications

More information

CALIFORNIA STATE UNIVERSITY, LOS ANGELES WELDING, CUTTING, AND HOT WORK OPERATIONS. October 2007

CALIFORNIA STATE UNIVERSITY, LOS ANGELES WELDING, CUTTING, AND HOT WORK OPERATIONS. October 2007 CALIFORNIA STATE UNIVERSITY, LOS ANGELES WELDING, CUTTING, AND HOT WORK OPERATIONS October 2007 PROGRAM APPROVAL AND AUTHORIZATION James M. Rosser, President Date TABLE OF CONTENTS TITLE SECTION PURPOSE

More information

CENTRAL GAS SUPPLY SYSTEMS : CYLINDER BATTERIES AND HIGH PRESSURE HOSES

CENTRAL GAS SUPPLY SYSTEMS : CYLINDER BATTERIES AND HIGH PRESSURE HOSES P0170E-1.DOCX/08.16/MG CENTRAL GAS SUPPLY SYSTEMS : CYLINDER BATTERIES AND HIGH PRESSURE HOSES With a Central Gas Supply System, individual work places or gas take-off stations are supplied with gas through

More information

UNIVERSITY OF PITTSBURGH HOT WORK PROGRAM

UNIVERSITY OF PITTSBURGH HOT WORK PROGRAM University of Pittsburgh 1 Hot Work Program July 2003. UNIVERSITY OF PITTSBURGH HOT WORK PROGRAM All hot work can create conditions with high probability for fire related injury or property loss. Hot work

More information

WELDING AND CUTTING GUIDELINES

WELDING AND CUTTING GUIDELINES Page 1 of 8 University employees should observe the following general safety guidelines when performing hot work operations. Also see the Hot Work Guidelines EH&S 02-008. Hot work is defined as: brazing,

More information

CHAPTER 26 WELDING AND CUTTING

CHAPTER 26 WELDING AND CUTTING CHAPTER 26 WELDING AND CUTTING Revised 7/2010 1 WELDING AND CUTTING Responsibilities 1. The County Safety Officer is responsible for providing appropriate safety instructions for supervisor's use on welding

More information

MODULE 3 THE BRAZING PROCESS

MODULE 3 THE BRAZING PROCESS MODULE 3 THE BRAZING PROCESS ISSUED BY REVISION NUMBER REVISION DATE DOCUMENT NUMBER S. GINBEY 0 5 th May 2014 QP74 Module 3 The Brazing Process Preparation of joints and materials The removal of all oxides

More information

Specifications. Dimensions Product Only With Packaging Materials of Construction Kit Box. Equipment Tray Insert. Oxygen / Acetylene GWKOA

Specifications. Dimensions Product Only With Packaging Materials of Construction Kit Box. Equipment Tray Insert. Oxygen / Acetylene GWKOA WELDING, BRAZING AND CUTTING KITS Tesuco offers a range of oxygen / acetylene and oxygen / LPG kits to suit the industries they are designed for. This includes complete cutting and welding kits and kits

More information

W-500 WELDING TORCH and CW-500 CUTTING ATTACHMENT

W-500 WELDING TORCH and CW-500 CUTTING ATTACHMENT W-500 WELDING TORCH and CW-500 CUTTING ATTACHMENT Instruction Manual F-12-837-F 05 / 2004 Vaild serial no. 150-xxx-xxxx BE SURE THIS INFORMATION REACHES THE OPERATOR. YOU CAN GET EXTRA COPIES THROUGH YOUR

More information

Doc No: WELDHOT Midland Engineering Co., Inc. Initial Issue Date 12/14/15 Safety Management System

Doc No: WELDHOT Midland Engineering Co., Inc. Initial Issue Date 12/14/15 Safety Management System Revision Preparation: Safety Mgr Authority: President Issuing Dept: Safety Page: Page 1 of 7 PURPOSE To provide guidelines for the safe operation of welding, cutting and hot work of equipment, and to itemize

More information

Hose Fittings. Pressure Gauges & Filter GAS EQUIPMENT. Little Torch Hose Nuts. Little Torch Hose Tailpiece. Little Torch & Quickbraze Hoze Ferrule

Hose Fittings. Pressure Gauges & Filter GAS EQUIPMENT. Little Torch Hose Nuts. Little Torch Hose Tailpiece. Little Torch & Quickbraze Hoze Ferrule Hose Fittings Little Torch Hose Nuts Type Nut Thread & Number Hose ID Size 16173 Oxygen 9/16 in-18 RH 1/8 in (3 mm) 16174 Fuel Gas 9/16 in-18 LH 1/8 in (3 mm) 16174 1882 Little Torch Hose Tailpiece Type

More information

portable torch kit - without tank Model Assembly And Operation Instructions

portable torch kit - without tank Model Assembly And Operation Instructions portable torch kit - without tank Model 96307 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks

More information

Compressed Gases Storage and Handling Safety Policy. Individual Unit Function: Safety Procedure No.: SOP-0103 Page: 1 of 6

Compressed Gases Storage and Handling Safety Policy. Individual Unit Function: Safety Procedure No.: SOP-0103 Page: 1 of 6 Procedure No.: SOP-0103 Page: 1 of 6 MIDGA Reviewed: 07/09/18 Effective: 1/14/98 Supersedes: Original Preparer: Owner: Approver: Safety Safety Safety 1. PURPOSE The purpose of this procedure is to establish

More information

Gas Equipment from ESAB

Gas Equipment from ESAB Gas Equipment from ESAB A full line of gas equipment solutions for every application, industry, and environment. Gas Equipment ESAB's premium blend of time tested design and modern innovation is the result

More information

SAFETY IN WELDING & GAS CUTTING OPERATIONS

SAFETY IN WELDING & GAS CUTTING OPERATIONS SAFETY IN WELDING & GAS CUTTING OPERATIONS National Safety Council, Hqs. 98 A,Institutional Area, Sector 15, CBD Belapur, Maharashtra NaviMumbai 400615. India www.nsc.org.in Contact no : 022 27579924 /25

More information

Gas Equipment. For Cutting, Gouging, Welding & Heating QUALITY GAS EQUIPMENT.

Gas Equipment. For Cutting, Gouging, Welding & Heating QUALITY GAS EQUIPMENT. For Cutting, Gouging, Welding & Heating QUALITY GAS EQUIPMENT www.tesuco.com.au Introduction Beginning in 1988, Tesuco has established itself as a specialist equipment supplier for all gas welding, heating

More information

Risk Assessment. A guide to the safe storage and use of oxygen and dissolved acetylene equipment

Risk Assessment. A guide to the safe storage and use of oxygen and dissolved acetylene equipment Risk Assessment A guide to the safe storage and use of oxygen and dissolved acetylene equipment Introduction 2 INTRODUCTION From the 1st October 2006 the Regulatory Reform (Fire Safety) Order 2005 (RRO)

More information

Take care with acetylene

Take care with acetylene This leaflet is for people who use acetylene for welding, cutting and similar processes. It provides information on the fire and explosion hazards of acetylene. Acetylene cylinder explosion An operator

More information

LP GAS PRODUCTS HIGH QUALITY GAS PRODUCTS SINCE 1957

LP GAS PRODUCTS HIGH QUALITY GAS PRODUCTS SINCE 1957 LP GAS PRODUCTS HIGH QUALITY GAS PRODUCTS SINCE 1957 Enerco, based in Cleveland Ohio, has been at the forefront of infrared technology since 1957. This market leading technology has allowed Enerco to build

More information

COMPANY HEALTH & SAFETY PROGRAM. Title: Welding & Cutting Section No: 45

COMPANY HEALTH & SAFETY PROGRAM. Title: Welding & Cutting Section No: 45 Page 1 of 10 1.0 PURPOSE The purpose of this section is to heighten employee awareness of potential welding and cutting hazards, and to communicate acceptable work practices. It is intended that supervisors

More information

Welding & Cutting Guide

Welding & Cutting Guide Welding & Cutting Guide BOC products perform with reliability and the backing of Australia s leading welding supplier Introduction This guide provides the basic knowledge required for using the gas welding,

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information