Safety Essentials. Mandatory rules for our high risk activities
|
|
- Toby Hines
- 5 years ago
- Views:
Transcription
1 Mandatory rules for our high risk activities
2 Remember... Only undertake activities for which you are trained, competent and authorised to do Before you start a job take a step back, think about all the risks and which apply to your situation and implement controls Monitor and manage changes as they happen while you are completing works, and challenge anyone you see not following the If you are unsure of the safe way to do a task or how to apply the, you must stop the job and ask for assistance from your team leader or supervisor Our are mandatory rules which provide absolute clarity about what is expected when conducting high risk activities that could result in serious injury or fatality. We will not negotiate on our because nothing is more important to us than the safety of our people, contractors and community. Sue Murphy Chief Executive Officer Name: are mandatory for all Water Corporation employees, together with all supporting controls referred to in this booklet. The principles of apply to contractors, sub-contractors and their employees. Where marked with a # the documents referred to in this booklet are mandatory contractual requirements. 01
3 Hierarchy of Control Hierarchy of Control When deciding how to control a risk, you should always aim to eliminate the hazard altogether. When elimination is not possible, work through the hierarchy with your team and select the next option that will effectively control the hazard. Use more than one option from the list to reduce the risk as much as you can. You can also help create a safer way of working for everyone by giving feedback to those that control the planning, design and construction of our assets they need your input to help make your work safer. By providing feedback on better ways to control the hazards to the designers, job planners, schedulers, managers, etc you are helping to reduce the risks for future works. Can you ELIMINATE the hazard altogether? Can you SUBSTITUTE the hazard with a safer alternative? Can you ISOLATE the hazard from anyone who could be harmed? Can you use ENGINEERING controls to reduce the risk? Can you use ADMINISTRATIVE controls to reduce the risk? Can you use PPE to protect yourself from the hazard? Most effective 02 03
4 Isolation Never work on an energy source without the correct method of isolation Lifting Operations Always inspect lifting equipment and do not allow anyone to be in the drop or exclusion zone Electrical WC-OSH 109 Tagging and Isolation # Cranes S488 Lifting Mechanical Water mains / fluid systems Sewer systems Tagging and Isolation (Level 1) Training Tagging and Isolation (Level 2) Training Hiabs Davit cranes Pump station lifting equipment Gantry cranes High Risk Licences Crane Operator Certification Tagging and Isolation (Level 3) Training OSH Permits Training # Key document also relevant to contractors 04 05
5 Mobile Plant Understand the risks and get approval from the operator before approaching mobile plant Electrical Always identify and assess all underground, overhead and other electrical hazards before starting work Excavators Tippers Cranes Backhoes S146 Mobile Plant Operator Competency # S145 Machinery, Plant and Equipment Competency assessment to NOHSC: 7019 High Risk Work Licences Overhead powerlines Underground powerlines Water meter changes Switchboards Metallic pipelines S133 Electrical Safety S033 Avoid Contact with Services S487 Safe Work on Low Voltage Electrical Equipment and Installations Bridging Cables and Managing Electrified Water Services Bridging Cables Training Use Locating Devices Training # Key document also relevant to contractors 06 07
6 Confined Space Never enter a confined space without an authorised confined space entry permit Excavation Never enter an excavation unless it has been assessed as safe by a competent person Sewer access chambers S466 Confined Spaces # Water and sewer mains S216 Excavations Water mains Wet wells Water tanks OSH Permit Training Confined Space Entry Training Gas Test Atmospheres Training CSE Overview for Contractors and Inspectors Training Water and sewer connections Pipeline construction Construction activities S033 Avoid Contact with Services S152 Public Safety at Construction Sites # Excavation Safety Awareness Training Use Locating Devices Training # # Key document also relevant to contractors Key document also relevant to contractors 08 09
7 Road Safety Always plan your trip, inspect your vehicle and drive safely to the conditions. Always ensure people and public safety through compliance with traffic management plans Hazardous Substances Always comply with the Material Safety Data Sheets (MSDS) and the relevant procedure when working with or around hazardous substances Travel by road PCY266 Workplace Road Safety Chlorine S140 Hazardous Substances Construction sites Works on or adjacent public roads WC-OSH 111 Traffic Management Driver Training / Defensive Driver Training Sodium Hypochlorite Fluoride Systems Asbestos Chemicals in the Workplace Training Working with Chlorine (Module 1) Training Basic Worksite Traffic Management Training Asbestos Awareness Training Fluoridation Systems Training 10 11
8 Notes Fall Prevention Never work without assessing and controlling the risk of a fall Tank sites Pits Treatment plants Works under construction S151 Prevention of Falls S467 Rescue Planning Prevention of Falls General Awareness Training Grid Mesh Awareness Training Fall Injury Prevention Systems (FIPS) Training 12
9 Version date: 1 January 2015 For all underground works, you must always use Dial Before You Dig. Contact 1100 for location of all services.
Our commitment to safety
2 Our commitment to safety At South East Water, we have an absolute commitment to achieving and maintaining a safe and healthy workplace for our people, including our contractors and stakeholders which
More informationSafety at Work. Rules for Staying Alive
Safety at Work Rules for Staying Alive Safety at Work Rules for Staying Alive Introduction The purpose of Dana Gas Rules For Staying Alive is to address the key causes of deaths in our industry. These
More informationContractor OHS Induction. AOHS-05-GUI September 2016
Contractor OHS Induction AOHS-05-GUI-002 8 September 2016 1 About AQWEST AQWEST is a Government Trading Enterprise responsible for supplying drinking water to Bunbury. Formed in 1906 as the Bunbury Water
More informationSafe Work Method Statement
Title Skid Steer Operation (Bobcat) SWMS No. 14 Authorized and email Signed by the (Managing Director / CEO / Partner / Proprietor) on Date 01/08 /2016 Safe Work Procedure for the Work:- Yes No Employees
More informationList all key terms and acronyms used in the procedure, and their definitions.
Purpose The purpose of this procedure is to provide guidelines for electrical safety in general within Seqwater in compliance with the Electrical Safety Act 2002, Industry Codes of Practice, Regulations,
More informationSH&E Work Method Statement Concrete Cutting & Drilling Fast Cut Qld Pty Ltd, 91 Basalt, GEEBUNG PH M ABN
SH&E Work Method Statement Concrete Cutting & Drilling Fast Cut Qld Pty Ltd, 91 Basalt, GEEBUNG PH 07 3265 6537 M 0411 756 719 ABN 45 081 359 613 OHS-FRM-100 Rev 11 (07/18) Page 1 SH&EWMS No.: F-C-QLD-30
More informationGOLDEN SAFETY RULES AFT DR
GOLDEN SAFETY RULES The Golden Safety Rules exist to keep you safe Your safety and the safety of your workmates is paramount. The Golden Safety Rules exist, above all else, to keep you safe. Since we adopted
More informationCONTRACTOR WHS HAZARD STANDARD CONFINED SPACE EXTERNAL USE ONLY
CONTRACTOR WHS HAZARD STANDARD CONFINED SPACE EXTERNAL USE ONLY Principles in the Optus Contractor WHS management process CONTRACTOR MANAGEMENT STAGES PRINCIPLES THIS STANDARD REQUISITION Requisition WHS
More informationSafe work method statements
Information about Safe work method statements How to prepare and use a safe work method statement (SWMS) for high risk construction work (HRCW) and who needs to prepare one. October 2018 Key concepts Hazard
More informationTLILIC2001 Licence to Operate a Forklift Truck
Learner Name: Learner ID: Learner Contact Number: Learner Email Address: Date Training Commenced: This Book Contains: Course Information. Review Questions. The following review questions are to be completed
More informationHAZARD MANAGEMENT PROCEDURE
TABLE OF CONTENTS 1. OBJECTIVE... 2 2. SCOPE... 2 3. DEFINITIONS... 2 4. RESPONSIBILITIES... 2 5. HAZARD IDENTIFICATION... 3 5.1 HAZARD AND RISK IDENTIFICATION TOOLS AND METHODS... 3 5.1.1 Take 5 Risk
More informationSAFE WORK METHOD STATEMENT SWMS No Version
SAFE WORK METHOD STATEMENT SWMS No Version Company Name: Hunter Readymixed Concrete Pty Ltd 00 004 Location: Thornton Cessnock Tea Gardens Gateshead ABN: 6 076 08 695 SWMS Developed By: Duane Harrison
More informationSafe Work Method Statement (SWMS)
Safe Work Method Statement (SWMS) Organisation Details : Organisation Name Northern Plumbing Contact ABN 17 15 41 4 Position Director Address 47 Thomas Street Edgeworth 85 Phone Number 0411 10 4 Project
More informationHealth & Safety Contractor rules
Health & Safety Contractor rules Contents 1. Introduction... 1 2. The legal bit explaining our terminology... 1 2.1 Legal requirements... 1 3. Our health and safety requirements... 1 3.1 Access to BT premises...
More informationA MESSAGE FROM THE MD
A MESSAGE FROM THE MD The Life Saving Rules set out clear and simple dos and don ts covering activities with the highest potential safety risk and apply to all employees and contractors. The best-performing
More informationContractor handbook. Purpose
Page no: 1 / 6 Contractor handbook Purpose Mitie aims to ensure that the highest levels of performance are achieved by all persons working for us or on our behalf. We require the same level of performance
More informationSection J. How to develop safety elements for project safety management system. How to develop safety elements for project SMS
Section J How to develop safety elements for project safety management system 1. Once the project management has developed or adopted a safety policy, it needs to develop safety elements to meet the objectives
More informationPotential risk of injury to staff
Register Fire, Earthquake - other Emergencies Manual Handling and Repetitive Work Repetitive, Forceful Work Poor Housekeeping Not Wearing PPE (Personal Protective Equipment) Potential risk of injury to
More informationWork Activity (e.g. Road Work): Work Location:.
Working with Cranes Work Activity (e.g. Road Work): Work Location:. GENERAL INFORMATION Hinchinbrook Shire Council Lannercost Street Ingham Qld, 4850 ABN 46 291 971 168 Ph: 47764610 All personnel conducting
More informationSafe Work Method Statement Required for all High Risk Activities identified for the Project
Application of Herbicides SWMS #1 Safe Work Method Statement * This column is used to undertake frequent Workplace Audits/Inspection to verify controls are in place. # If a control measure is ongoing indicate:
More informationWHS PROCEDURE P Confined Spaces. Approved by: Ruth Hampton Review Date: 6 th December 2015
5 WHS PROCEDURE P21-01 Page 1 of 7 Issue: 2 1. Intent The Salvation Army Australia Eastern Territory (TSA-AUE) is committed to the provision of a safe, healthy and injury free environment for all persons
More informationCONSTRUCTSAFE TIER 1 HEALTH AND SAFETY COMPETENCY TEST FRAMEWORK
CONSTRUCTSAFE TIER 1 HEALTH AND SAFETY COMPETENCY TEST FRAMEWORK ConstructSafe Project Team March 2018 Version 1.3 1 Table of Contents 1. Introduction... 3 2. Candidate minimum required knowledge... 3
More informationCONTRACTOR SAFETY INDUCTION HANDBOOK
CONTRACTOR SAFETY INDUCTION HANDBOOK As a valued contractor for Total Group we would ask that you read and carefully consider the details included in this document. Total Group carry out work for a number
More informationSAFE WORK METHOD STATEMENT WORKING IN CONFINED SPACE HSE NET NAT SWMS APAND00030
SAFE WORK METHOD STATEMENT WORKING IN CONFINED SPACE HSE NET NAT SWMS APAND00030 HIGH RISK APT AM Holdings Pty. Ltd. [ABN] 95124754383 Principal Contractor (PC) APA Group Level 19, HSBC Building 580 George
More informationTemporary load-bearing support for structural alterations or repairs
CRITICAL NOTE This document only becomes a Safe Work Method Statement where the High Risk Construction Work section of this document is completed Company: ABN: Contact Person: Ph: Project/Site: Principal
More informationRIIWMG203D Drain and Dewater Civil Construction Site Learner Guide
RIIWMG203D Drain and Dewater Civil Construction Site Table of Contents 1.1 Introduction... 3 1.1.1 Drainage and Dewatering... 3 1.2 Site Policies and Procedures... 5 1.3 Work Instructions... 6 1.3.1 Reading
More informationSafe Work Method Statement
TE CONTROLLED COPY OF TIS DOCUMENT IS ON TE COMPUTER NETWORK PRINTED COPIES ARE ONLY CURRENT FOR TE DATE AT TE BOTTOM OF TE PAGE. Title Working at eight SWMS No. 16 Authorized and email Signed by the (Managing
More informationCritical Risk Control Protocol
Critical Risk Control Protocol Contents Foreword 3 Introduction 4 Critical Controls 4 Exemption Process 4 UGL s Critical Risks 5 Working at Height 6 Operation of Mobile Plant 7 Working in Confined Spaces
More informationConfined Space in Construction
Confined Space in Construction History OSHA has been working on a confined space rule for construction since 1994. In 1993 OSHA passed a Permit Required Confined Space Rule however the provisions applied
More informationJob Safety & Environment Analysis
Job Safety & Environment Analysis To be used when the risk is greater than LOW and / or Defined Hazardous Work and there is no standard procedure for the task. All sections of this JSEA form must be completed.
More informationWe live by the Life Saving Rules so that everyone goes home safe, every day.
We live by the Life Saving Rules so that everyone goes home safe, every day. OUR COMMITMENT STATEMENT: As a TransCanada employee or contractor performing work on behalf of TransCanada, I will adhere to
More informationSWMS No 007 Samark North Qld Pty Ltd ABN : Electrical Contractors License C37121 Page 2 of 6
Samark North Qld Pty Ltd SWMS Manual SWMS No 007 Samark North Qld Pty Ltd ABN : 99 082 958 487 Electrical Contractors License C37121 Page 2 of 6 Safe Work Method Statement Title: SWMS:007 WORKING ON ENERGISED
More informationRisk Assessment Form (Qualitative)
Assessment Form (Qualitative) Project / ocation:..d.a.s WATERS Contract No: RA & Issue No: 008 Prepared by:.r.smit Date: 10/10/16 Signature: ACTIVITY DESCRIPTION: Person (s) at risk: General Ground works
More informationWHS CONTRACTOR INFORMATION PACKAGE
WHS CONTRACTOR INFORMATION PACKAGE Introduction This information package provides Informa exhibitors and contractors with important information that will be required to plan and manage work on all stages
More informationHealth & Safety Plan `
Rolleston Men s Shed Charitable Trust Health & Safety Plan ` 54 Dynes Rd Rolleston Ph. (03) 347-3173 Cell: 027 430-3076 E-mail: rollyshed@xtra.co.nz Version 3 15/12/2016 Page 1 of 20 TABLE OF CONTENTS
More informationHampstead Hill School Health and Safety Policy: Confined Spaces
All Hampstead Hill School Policies are always to be read and considered in conjunction with Equal Opportunities, Race Equality and Inclusion Policies. This Policy of Hampstead Hill School applies to all
More informationSafe Work Method Statement
TE CONTROLLED COPY OF TIS DOCUMENT IS ON TE COMPUTER NETWORK PRINTED COPIES ARE ONLY CURRENT FOR TE DATE AT TE BOTTOM OF TE PAGE. Title Dogging of Crane General Loading and Unloading SWMS No. 20 Authorized
More informationUnit Title: Health and Safety in a Construction Environment
Unit Credit Value: 4 Unit Level: One Unit Guided Learning Hours: 40 Ofqual Unit Reference Number: K/505/1933 Unit Review Date: 30/04/2018 Unit Sector: 5.2 Building and Construction Unit Summary This unit
More informationSWMS No 012 Samark North Qld Pty Ltd ABN : Electrical Contractors License C37121 Page 2 of 6
Samark North Qld Pty Ltd SWMS SWMS No 0 Samark North Qld Pty Ltd ABN : 99 08 98 87 Electrical Contractors License C37 Page of 6 Safe Work Method Statement Title: SWMS:0 INSTALLING LIGHT POLES Work Method
More informationA Guide to working safely near Overhead Power Lines
A Guide to working safely near Overhead Power Lines 1 Please Note This information is for guidance only and is not to be taken as an expression of the law. It should be read in conjunction with the Workplace
More informationWe take safety very personally at Aurecon. Safety is everybody s business, every day. Health and safety incidents are not inevitable, they are
Safety Essentials We take safety very personally at Aurecon. Safety is everybody s business, every day. Health and safety incidents are not inevitable, they are preventable. Supporting the Health and Safety
More informationUNIVERSITY OF NOTRE DAME CONFINED SPACE ENTRY POLICY
UNIVERSITY OF NOTRE DAME CONFINED SPACE ENTRY POLICY Revised: February 2004 TABLE OF CONTENTS I. Introduction.. -4- II. Definition of a Confined Space -4- III. Responsibilities -5- A. University of Notre
More information1. Objective of the initiative To ensure that all employees and subcontractors are aware of the risks associated with working at height.
Safety Initiative 02 Working at Height May 2011 CONTENTS 1. Objective of the initiative 2. Overview. 3. Implementation 4. Duties 5. Hierarchy of Controls 6. Workplace Inspections 7. Fragile Surfaces 8.
More informationOverview of Today s Program
OSHA s New Confined Spaces In Construction Standard What You Need To Know Rod Smith rsmith@shermanhoward.com 303.299.8197 Pat Miller pmiller@shermanhoward.com 303.299.8354 Overview of Today s Program 1
More informationPolicy Redesign Project. Plant Safety Policy. Table of Contents
Policy Redesign Project All policies and procedures are being reviewed as part of this project. This document is pending review, but remains in effect until the review is carried out. Plant Safety Policy
More informationISS Safety Rules. Make safety second nature
ISS Safety Rules Make safety second nature 2 ISS SAFETY RULES ISS SAFETY RULES 3 INTRODUCTION We are a company driven by close to 500,000 strong people spread across 77 countries around the globe. And
More informationHealth & Safety Policy & Plan. Rightway Roofing.
Health & Safety Policy & Plan. Rightway Roofing. Valid: 02/2012-02/2013 Contents ( 1 ) Policy Statement. ( 2 ) Hazard Identification. ( 3 ) Hazard Management. ( 4 ) Induction & Training. ( 5 ) Monitoring
More informationReturn the completed questionnaire, OSHA 300A Summary form and EMR Rating via e- mail.
EHS CONTRACTOR SAFETY It is the Mission of Olin Brass to Create an environment of safety excellence where an injuryfree work place is achieved through continuously confronting and correcting unsafe conditions
More informationContractor / Exhibitor Handbook
Contractor / Exhibitor Handbook Health and Safety This booklet outlines the basic rules that must be followed by contractors and other visitors working on Live Promotions Events sites. The contractors
More informationSAFE WORK METHOD STATEMENT
SAFE WORK METHOD STATEMENT EXCAVATION OR TRENCHING Prepared for Client: Rural Construction & Maintenance Pty Ltd Project No: 1 Site: 660 Great Ocean Road, Bellbrae Date Prepared: 29/07/2015 1. RESPONSIBILITIES
More informationCONFINED SPACES IN CONSTRUCTION SUBPART AA
21 st Annual Willis Construction Risk Management Conference CONFINED SPACES IN CONSTRUCTION 1926.1200 SUBPART AA 9/15/15 Jim Goss WHAT S NEW Still Happening! September 2013 Canastota NY WWTP - Worker fatally
More informationConfined Spaces. This procedure applies to all workers of the Diocese of Maitland Newcastle (DoMN).
Purpose To provide guidance in controlling the risks associated with confined spaces including identifying confined spaces, working in a confined space and issuing confined space entry permits. Scope This
More informationMinimum Safety Requirements for Contractors Working on Railway Property
Minimum Safety Requirements for Contractors Working on Railway Property Effective_ April 1, 2007 Introduction Canadian Pacific is committed to provide a Safe and Healthy working environment for all Railway
More informationMcKay Moore Drainage Ltd. Health and Safety Policy
McKay Moore Drainage Ltd Health and Safety Policy Table of Contents 1) Health & Safety Policy 2) Hazard Identification 3) Hazard Management 4) Training 5) Site Induction 6) Monitoring and Review 7) Site
More informationSITE SAFETY SUPERVISOR (SSS)
SITE SAFETY SUPERVISOR (SSS) 1.0 OBJECTIVE At the end of the course, the participant will be able to: Describe the OSH legislative requirements pertaining to construction site; Conduct the risk management
More informationField Instruction. The purpose of this instruction is to inform all Horizon Power workers of the safety requirements when working from a EWP.
2.7 Safety Requirements When Working from an EWP Purpose The purpose of this instruction is to inform all Horizon Power workers of the safety requirements when working from a EWP. Scope The scope of this
More informationWORK METHOD STATEMENT STRUCTURAL STEEL
ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone
More informationHealth & Safety Policy HSP 13 Working at Height Version Status Date Title of Reviewer Purpose/Outcome
Health & Safety Policy HSP 13 Working at Height Version Status Date Title of Reviewer Purpose/Outcome 1.0 Draft 07.03.2016 David Maine 1 st Draft for consultation/review 1.1 Approved 10.01.2017 David Maine
More informationFLYING OBJECTS MANUAL HANDLING EXCESSIVE NOISE
JOB NO: PROJECT: DATE: SWMS NO: SWMS 002 PREPARED BY: Ian Hartley REVISED BY: Nick Bragg & Cameron McNeil ACTIVITY: STUMP REMOVAL SUPERVISED BY: REVISION DATE: April 2016 MINIMUM PERSONAL PROTECTIVE EQUIPMENT
More informationInstructions for the Use of the Excel Spreadsheet. There are Three tabs at the bottom of this worksheet. Instructions tab is the one you are reading
Instructions for the Use of the Excel Spreadsheet There are Three tabs at the bottom of this worksheet Instructions tab is the one you are reading H&S Plan Tab The Plan Tab is the front cover pages of
More informationCONTRACTOR WHS HAZARD STANDARD HAZARDOUS CHEMICALS EXTERNAL USE ONLY
CONTRACTOR WHS HAZARD STANDARD HAZARDOUS CHEMICALS EXTERNAL USE ONLY Principles in the Optus Contractor WHS management process CONTRACTOR MANAGEMENT STAGES PRINCIPLES THIS STANDARD REQUISITION Requisition
More informationElectrical Safety. Hazard Awareness
Electrical Safety Hazard Awareness What does Hazard mean? Hazard means: any potential or actual threat to the wellbeing of people, machinery or environment Electrical hazard safety means: taking precautions
More informationSAFETY FACT SHEETS. Confined Space Entry Safety Non Negotiable. G-HS-ST Confined Space Entry. G-HS-FS Verison 1
SAFETY FACT SHEETS Confined Space Entry Safety Non Negotiable G-HS-ST-00736 Confined Space Entry Safety Non-Negotiables (SNN) Zinfra Group is committed to providing a safe workplace in line with our number
More informationUETTDRRF06B PERFORM RESCUE FROM A LIVE LV PANEL LEARNER GUIDE
UETTDRRF06B PERFORM RESCUE FROM A LIVE LV PANEL LEARNER GUIDE TABLE OF CONTENTS Review Log... 4 Module Basis... 4 1.1 Introduction... 5 1.2 Identify And Control Risks And Hazards... 6 1.2.1 Risk Management...
More informationContractor Health and Safety Handbook
HSE/2015/VER01 Contractor Health and Safety Handbook A guide to keeping you safe and healthy whilst working on behalf of Norse Commercial Services SAFETY FIRST SAFETY FIRST 280 Fifers Lane, Norwich NR6
More informationPRO Lifting Operations
MS&L Procedure PRO-4.5-0001-1-06 Lifting Operations Document Owner: Bill Kruesi HSSE Manager - Asset Mgmt. Owen Quake ANZ Engineering Authority Approved By: Bill Kruesi HSSE Manager - Asset Mgmt. Control
More informationField Instruction. This instruction outlines the minimum requirements for all Horizon Power workers who undertake Vegetation Management Work.
10.6 Management Work Purpose This instruction outlines the minimum requirements for all Horizon Power workers who undertake Management Work. Scope The scope of this instruction is to inform all Horizon
More informationPlant Isolation Lock out/tag out Procedure
Plant Isolation Lock out/tag out Procedure Related Policy Responsible Officer Approved by Work Health and Safety Policy Approved and commenced November, 2014 Review by November, 2017 Responsible Organisational
More informationSAFE WORK METHOD STATEMENTS
Recips 11/56 Norcal Road Nunawading Vic. 11 ABN: 48 04 075 70 Contact Person: Dean Spicer Contact Number: 9878 9006 SAFE WORK METHOD STATEMENTS for Format 1 Various Service Clients for Service work and
More informationHow volunteer organisations can comply with the model Work Health and Safety Act LEGISLATIVE FACT SHEET SERIES
How volunteer organisations can comply with the model Work Health and Safety Act LEGISLATIVE FACT SHEET SERIES Overview This fact sheet provides information about what volunteer organisations need to do
More informationISOLATION ISSUE 2 1 AIM 2 4 REASONS FOR INCLUSION 3 6 PLANT AND EQUIPMENT REQUIREMENTS 3 7 SYSTEM & PROCEDURAL REQUIREMENTS 4 8 PEOPLE REQUIREMENTS 6
CONTENTS PAGE 1 AIM 2 2 APPLICATION 2 3 DEFINITIONS 2 4 REASONS FOR INCLUSION 3 5 REQUIREMENTS 3 6 PLANT AND EQUIPMENT REQUIREMENTS 3 7 SYSTEM & PROCEDURAL REQUIREMENTS 4 8 PEOPLE REQUIREMENTS 6 APPENDIX
More informationCIVIL INFRASTRUCTURE HEALTH, SAFETY, AND ENVIRONMENT Describe protection of health, safety and environment in the civil infrastructure industry
1 of 8 level: 3 credit: 7 planned review date: October 2006 sub-field: purpose: Civil Works and Services This unit standard is a component of the selfregulation system for operations in the civil infrastructure.
More information7 Hazard assessment 8 Worker participation 9 Hazard elimination and control
This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. Businesses in this industry
More informationScope: This plan applies to all personnel, including contractors, who enter or work in confined spaces, or supervise such activities.
11/13/1995 4 5/20/2013 1 of 10 Authority and Scope Regulation: 29 CFR 1910.146 Scope: This plan applies to all personnel, including contractors, who enter or work in confined spaces, or supervise such
More informationSite-Specific Safety Plan
Site-Specific Safety Plan All the documents you need can be accessed through the menu below. Click on the icon to go to the section that applies to you. Once in the section you can easily click the back
More informationSafe Work Method Statement LRB TREE SERVICES 6 Behland St, Kearneys Spring QLD, 4350 ABN
JOB NO: PROJECT: DATE: 1/1/2018 SWMS NO: SWMS 001.1 PREPARED BY: LUKE BLINCO REVISED BY: ACTIVITY: TREE REMOVAL & PRUNING SIGNED BY: REVISION DATE: MINIMUM PERSONAL PROTECTIVE EQUIPMENT (PPE) REQUIREMENTS
More informationSafe Work Method Statement
ABN 4 65110 0 BERWICK VIC 06 Mob: 044 6 45 Date: Principal Contractor: Project Name: Project Address/Location: Commencement Date: Duration of Work: Scope of Work (Outlines the scope of the work that is
More informationGuidance: HSW Risk Assessment Methodology HSW-PR09-WI01. Objective. Implementation
1.0 Objective This Work Instruction is designed to assist in the assessment of health and safety and wellbeing (HSW) risk and suggested controls associated with hazards identified while working throughout
More informationManagement of risk. Definition of terms. Managing risks. Risk
Definition of terms Risk Management of risk Risk is the possibility that harm (death, injury or illness) might occur when exposed to a hazard. A hazard is anything with the potential to cause injury or
More informationPLANT/EQUIPMENT/ASSET HAZARD REPORT
Asset Description: EL-09100-060 : Gantry hoist system Sale Type For what use is this asset being sold? Re-Use Spare Parts Scrap Note 1: Assets are sold only for the use indicated. Any other use is at the
More informationWelcome to the CHALLENGER SAFETY Induction
Welcome to the CHALLENGER SAFETY Induction Completing the Course This induction is to give employees/contractors the general information on how safety is managed and an overview of the permitting and reporting
More informationBased on market capitalization (in U.S. dollars) at December 31, 2015.
total.com Total is the world s fourth-ranked international oil and gas company (1) and a global leader in solar energy through our affiliate SunPower. We discover, produce, transform, market and distribute
More informationWork Health and Safety Risk Management Procedures
Work Health and Safety Risk Management Procedures Table of Contents 1. Governing Policy 2. Purpose 3. Scope 4. Definitions 5. Responsibilities 6. Risk Management Process 6.1. Process summary 6.2. Hazard
More informationHAZARD RECOGNITION EVALUATION and CONTROL
What is a hazard? HAZARD RECOGNITION EVALUATION and CONTROL Hazard - a dangerous object, event, behaviour or condition (in the workplace) which has the potential to cause injury, illness or property damage.
More informationSafe High Pressure Water Washing (HPWW) Requirement
Safe High Pressure Water Washing (HPWW) Requirement Index Page Introduction 3 Flow chart of process steps 4-5 Responsibilities 6 Risk assessment process 7-9 Job safety analyses considerations 10-11 Compliance
More informationElectrical safety code of practice Working near overhead and underground electric lines
Electrical safety code of practice 2010 Working near overhead and The Queensland Electrical safety code of practice 2010 Working near exposed live parts was made on 18 December 2009 and commenced on 1
More informationAPPENDIX A. Appendix A: Fall Hazards Lesson Test Instructor Copy (answers bold/italic), Student copy to distribute follows
APPENDIX A Appendix A: Fall Hazards Lesson Test Instructor Copy (answers bold/italic), Student copy to distribute follows 1. In general, fall protection must be provided to construction workers who are
More information1. SHEWMS DETAILS. Project No. Valid From
Name of Project Name / Description of Work Activity being undertaken Location at which Activity is being undertaken Name of SHEWMS Owner (Contractor) SHEWMS Owner Business Address Name of person who prepared
More informationConfined Space in Construction
Confined Space in Construction 1926.1201 1926.1213 Confined space means a space that: 1. Is large enough and so configured that an employee can bodily enter it; 2. Has limited or restricted means for entry
More informationTLILIC2005A Licence to operate a boomtype elevating work platform (boom length 11 meters or more)
TLILIC2005A Licence to operate a boomtype elevating work platform (boom length 11 meters or more) Release: 1 TLILIC2005A Licence to operate a boom-type elevating work platform (boom length 11 meters or
More informationASPEC Engineering HSE Management System. Work Instruction. 1 Objective. 2 Working in confined spaces. 2.1 What is a confined space?
1 Objective This work instruction has been developed to abide by the WHS Regulations (2011) and AS/NZ 2865 Safe working in a confined space. It has been developed around Hadden s typology for risk management,
More informationMobile Training Unit (MTU)
Mobile Training Unit (MTU) The MTU provides a convenient way of meeting training requirements by bringing a range of short duration health & safety and operative training onsite. Through the MTU, employees
More informationHealth and Safety Management System Template
July 2017 Health and Safety Management System Template A health and safety system template for quarry operations Contents 1 Using This Template 2 2 What Are Our Legal Requirements 3 3 Health and Safety
More informationField Instruction. Protect Horizon Power employees and contractors from a potential hazard.
2.15 Temporary Safety Barriers and/or Warning Signs Purpose This instruction sets out the minimum requirements for the installation and erection of temporary safety barriers and/or warning signs to: Protect
More informationAccident/Incident Reporting and Investigation Procedures
Accident/Incident Reporting and Investigation Procedures Policy reference Workplace Health and Safety Policy Procedure reference Workplace Health and Safety Risk Assessment Procedures Procedure It is imperative
More informationWORK METHOD STATEMENT CARPET LAYING
ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone
More informationProcedure: Permit Activities-Work in Confined Spaces and Hot Works
Procedure: Permit Activities-Work in Confined Spaces and Hot Works 1. Purpose Provide a safe working environment when working in confined spaces or whilst performing hot works in any GSCC building. 2.
More informationHazard Assessment Policy
Hazard Assessment Policy Introduction Construction sites, maintenance shops and yards are not without risk of injury. Those circumstances or conditions that pose the risk of an injury or loss must be determined
More informationSafe Work Method Statement (SWMS) Worksheet
WORKPLACE / PROJECT NAME: AMS REF NO / TITLE: COMPANY NAME: NETWORK DIRECTIONAL DRILLING (GEELONG) P/L (if applicable) SWMS NO: (if applicable) WORK ACTIVITY / JOB / TASK OR PROCESS DESCRIPTION DATE SWMS
More informationTelco Antennas SWMS Working At Height Above 2m
Telco Antennas SWMS Working At Height Above 2m A SWMS shall be developed for a task where the risk has been assessed as Medium or Higher Division: Date: SWMS No: (e.g. Installation, Engineering Workshop)
More information