VSS data sheet 详情联系 :TEL 87 QQ:78 Extreme Vacuum Conditioning The combination of selected materials and a special conditioning process reduce the outg
|
|
- Sylvia Bradley
- 5 years ago
- Views:
Transcription
1 详情联系 :TEL 87 QQ:78 ENG EXTREME VSS Stepper Motor For Applications up to Ultra-high-vacuum Motors for use in vacuum should t only withstand the vacuum ( bursting of air inclusions), they must t contaminate the vacuum either. By selecting suitable materials and optimised conditioning processes phytron VSS stepper motors are ideally suited for use in a vacuum. Through many years of experience with special materials for use in Space, we have put a focus on materials with minimal molecular outgassing and high heat resistance. This is the prerequisite for a high vacuum quality and genuine measurement results in scientific and medical applications. For exact positioning in vacuum, stepper motors are therefore particularly suitable because they can precisely position even without sensitive feedback providers. Therefore Highlights Performance & Lifetime phytron VSS stepper motors can be used in particularly challenging environmental conditions (radiation, cryo-temperatures and in a modified design even in Space). Since stepper motors do t generate jitter effects while holding a position, this techlogy is ideal for precisely aligning optical instruments, mirrors, antennas or samples e.g. in high-resolution microscopes, particle accelerators or molecular analysis devices. As a medium-sized company, we manufacture the VSS series in Germany and modify the standard motor to perfectly fit to your application. phytron in-vacuum motors are based on a techlogy that can also be found in the most challenging projects of our time. From a variety of satellites up to the Mars rover Curiosity: phytron motors drive applications in distant worlds - highly accurate, reliable and durable. Driven within their specification range, high quality components and a proven design make sure: These motors don t let you down! Cleanliness phytron motors for use in ultra high vacuum (UHV) contain only materials that also meet the requirements of the ECSS (European Space regulations). Thus, each material has a maximum TML (Total Mass Loss) value of % and a maximum CVCM (Volatile Mass Losses) value of. %. You will receive your UHV motor, double-wrapped and vacuum sealed. In Focus RoHS complient High Temperature Radiation Resistance Vacuum -phase stepper motors Holding torques from. mnm to Nm Diameters from 9 to mm Number of steps (standard) Step accuracy % for.8 Operating voltage Size 9 to 7: 7 V DC Size 8 to : V DC Protection class IP Standard connection: -lead parallel (option: series or 8-lead) Outgassing holes to avoid pockets of trapped gas Options VGPL precision planetary gear or Harmonic Drive gear Thermocouple type KTC/ Pt resistor sensor Resolver Double shaft Customised solutions Operating in an agressive environment Clean room applications to clean room class ISO (acc. to ISO -) Motors with spindle 详情联系 :TEL 87 QQ:78
2 VSS data sheet 详情联系 :TEL 87 QQ:78 Extreme Vacuum Conditioning The combination of selected materials and a special conditioning process reduce the outgassing rates to a level that allows low pressures of - hpa in the customer application. For this purpose, individual components of the UHV motors, such as the wound stator, are specially conditioned before installation, so that outgassing materials cant be deposited in the ball bearings or inside the motor. The fully assembled motor is outgassed by a phytron process at least C in vacuum chambers. Increased outgassing temperatures are available on request. The rule of thumb: the outgassing rate decreases with a decimal power for every K increase of the outgassing temperature. In the actual application the motor should always be driven at least K below the outgassing temperature. High Temperature Temperature Management All materials selected for the UHV motors can withstand a short-term winding temperature of up to C. Due to the lack of convection in vacuum, the motors can heat up very quickly and often work at a high temperature level - depending on the duty-cycle. In our UHV motors we integrate a thermocouple to allow monitoring of the exact winding temperature. All vacuum motors can t only be ordered with optional hermocouple, but also with platinum probes (PT) or customer- specific sensors. This is how you protect your motors safe from overheating. Adhesives The adhesives used were specially developed for phytron s applications. They represent an optimum of strength, ductility, low outgassing rates and thermal resistance. The outgassing rates (TML, CVCM) comply with the European Space standards. While the first adhesive is t brittle even at K, the second adhesive retains sufficient strength even at a winding temperature of C for short periods without taking damage. Bearings The usage of un-lubricated ball bearings can cause so-called cold welding, and thus degrade and completely block the bearing. Therefore, it is advisable to use lubricated ball bearings whenever the application permits. For this purpose a special vacuum grease is necessary to provide t only low outgassing rates but also an extended life-time for the bearing. There is special lubrication for temperatures down to - C or even -7 C. However, the viscosity is so high that the efficiency decreases considerably. In low temperatures, the use of dry-lubricated bearings is recommended. Radiation Resistance Radiation resistance With ascending vacuum class motors are equally designed for higher radiation dose to be used in the vicinity of radiation sources (e.g. in medicine and research). While a fine vacuum motor can be safely used only up to a dose of J/kg, a UHV motor may be safely operated up to a dose of J/kg. A motor t designed for radiation will t only suffer degradation of the insulation and the adhesives - especially the grease of the ball bearing degrades, reduces the efficiency and ultimately blocks the motor. 详情联系 :TEL 87 QQ:78
3 详情联系 :TEL 87 QQ:78 VSS data sheet Structure design As is commonly done in high vacuum class all structural elements such as housing, flanges and shafts are made of stainless steel. Outgassing holes in the rear flange also allow rapid evacuation and purging of the motors and make sure that gas inclusions may occur. All structural elements of the magnetic circuit are basically protected against corrosion. This also allows temporarily handling in rmal environment. Handling phytron VSS motors are primarily designed for use in vacuum. Although the components of the magnetic circuit are basically protected against corrosion, the motors should ideally be handled in clean rooms and clean boxes. A storage is permitted only in phytron s original packaging. The motors are to be handled with suitable gloves. Since the rotor is magnetic, it must necessarily be handled in a clean environment so that metal particles may be drawn into the motor. That could lead to an impairment of operation, reduce the life time or even cause the failure of the motor by blocking. Service, Consulting and Customising Of course we are happy if you are satisfied by our standard! But even if our in-vacuum motor series contains the application experience of several decades - sometimes the standard is just t eugh. We like to fit our motor for your application, because sometimes even small changes make all the difference. Special applications require special support: Our service experts are available even after the purchase. Winding temperature [ C] Vacuum class [hpa] Temperature sensor Radiationresistant up to [J/kg] Conditioning of the components First outgassing at phytron TML [%] CVCM [%] FV option HV option option UHV-S ) - type K ) yes yes < <. UHV-G ) - type K ) yes yes < <. UHV-C option yes < <. UHV-C option yes < <. ) short-term ) Pt as an option 详情联系 :TEL 87 QQ:78
4 VSS data sheet 详情联系 :TEL 87 QQ:78 Extreme Configuration guide START Size / Type Resol. Use bigger motor size Use motor with gear Select motor size { Preliminary assessment based on the required torque at max. speed (motor characteristics) and the available installation space. (Note: available voltage limits the max. speed) Is a full step resolution of.8 ( step motor) eugh? (The resolution can be increased by electronic control systems like micro step mode.) Duty Cycle DYNAMICS Current >.*IN is only needed for a short time? *) see derating formulas below yes yes yes yes yes yes { { { { Torque at the operating point (max. speed, max. load) at.*in current (current is proportional to torque)? (Background: overheating of the motor windings) For direct-drive (gearless motor): If external mass inertia <x to <x inertia of the rotor? (here you must accelerate with very long ramps in the micro step mode.) For direct-drive (gearless motor): High dynamics/acceleration required?: If external mass inertia <x to <x inertia of the rotor? For direct-drive and for motor gear units: Max. motor speed < rev./min? for dry lubrication < rev./min? (background: rotor heating) Motor (if necessary gear selection) is suitable Derating formulae Continuous operation without overheating at max. rev./min and.*i N. Short-term operating with higher current (I on ) is possible, depending on the duty cycle (ratio of t on to t off ). How long may the switch-on phase t on last? current I on.*i N How long will the break t off be? t on t off time What is the maximum value of the current I on during the switch-on phase? valid for speed <= rev./min; I N = minal current of the motor; I on >I N : over current feed 详情联系 :TEL 87 QQ:78
5 详情联系 :TEL 87 QQ:78 VSS data sheet Stepper Motor VSS 9 to VSS L g ØG I J ØG ØA ØG H D E F B F Dimensions / Electrical and Mechanical Characteristics Electrical Characteristics Mechanical Characteristics VSS Standard -steps lead parallel ) Current/ Phase IN Resistance/ Phase Inductivity/ Phase max. voltage AWG Holding torque Detent torque Rotor inertia axial Loads radial Mass Dimensions in mm A Ω mh V mnm mnm kg cm N N kg A B D E F F G G K L M N M M ) Holding torque in bipolar mode with parallel windings, two phases on at rated current ) other step resolutions on demand (with different mechanical characteristics!) All values given above refer to room temperature and atmospheric pressure. 详情联系 :TEL 87 QQ:78
6 VSS data sheet 详情联系 :TEL 87 QQ:78 Extreme Stepper Motor with VGPL Gear VGPL to VGPL to Z P Y O B' X Key DIN 88 P Y O B' Th8 Uh U ø S øa øa' T U h8 h ø S øa øa' R Q R Q VGPL to VGPL to VGPL to W W W V V V Dimensions Gear Stepper motor VSS Dimensions in mm Mass A A B O P Q R S T U V W X Y (Motor and Gear) in kg VGPL 9/ M x VGPL 9/ / M.x VGPL / M x VGPL / M x -... VGPL / M x8 xx..7.8 VGPL / M x8 xx..... VGPL M x xx...9. VGPL M 8x xx VGPL M x 8x7x 详情联系 :TEL 87 QQ:78
7 详情联系 :TEL 87 QQ:78 VSS data sheet Gear Stepper motor Gear backlash ) Rated torque ) Gear inertia Radial load ) Axial load Efficiency at full load ) arc-min Nm kg cm N N % Reduction ratio i[:] Stage Stage Stage Stage VSS Stage Stage Stage VGPL / 9 / / 8 / 8 / 8 / 7 9 VGPL 9 / /..8.. / / 8 / / 8 / 9 / VGPL /.. / /.7.9 / 99. VGPL /...8 / 8 /.8 / 9 /. / 7 / 8 / / / 88 VGPL /. / / / / / / 8 / / 8. / 9.89 VGPL 7... /.. /..8 / 8 /.8 / 9 /. / 7 / 8 / / / 88 / VGPL /.8 / 8 /.8 / 9 /. / 7 / 8 / / / 88 / VGPL VPGL 8. /. /. / / / / / / /.7 9 / / 8 / / 8. / / / 8 / / 8. VPGL.7... /. / / / 9 / 8 / / 8 ) load ) center of the shaft ) in grease-lubricated operation ) for the frequency of the start-stop movements < per hour (otherwise please consider the shock factor) 详情联系 :TEL 87 QQ:78
8 VSS data sheet 详情联系 :TEL 87 QQ:78 Extreme Stepper Motor with Resolver In comparison to other resolvers with variable differential rotary transformer, the resolvers R and R use a constant air gap. They are less sensitive to eccentricity and magnetic stray fields and can directly be connected to standard resolver-to-digital-(r/ D)- converters. The resolver is suitable for the use in fine, high and ultra high vacuum. R S C R S S S Electrical Characteristics Resolver Stepper motor A A C X Power supply [VAC] Frequency [khz] Primary impedance [ ] Secondary impedance [ ] Transformation ratio Rotor inertia [gcm ] A Mass [g] (Resolver) A X Motor with resolver RO Resolver Specification R R VSS VSS VSS VSS... 9 R VSS VSS VSS R VSS R VSS 8 8 R VSS R VSS ± % 9 9 详情联系 :TEL 87 QQ:78
9 详情联系 :TEL 87 QQ:78 VSS data sheet Resolver - Encoder Converter The position data converter controls automously the resolver sensor and converts the output signals of the resolver to incremental output signals (square wave signal). Resolution: increments Output reference signal: 8 V PP (diff.) ma max. khz Input SIN/COS: V PP (max.) Resolver transformation factor: K=. Supply voltage: V (... V DC ) Phytron ID: # 8 Resolver connection to the Converter: Pin Ref- Pin - Pin - Pin - Pin SIN+ Pin SIN Pin 7 Ref+ Pin 8 COS+ Pin 9 COS Screen PE NEW in 7-: The modular phymotion TM controller evaluates the resolver signals directly with the newly developed resolver evaluation module ECMS. Thermocouple Type K and Resistance Temperature Detektor Pt The insulated temperature sensor in phytron motors is integrated in the motor windings. The response time to temperature changes of the windung is very short, compared to temperature sensors mounted outside the motor housing. The temperature is measured all the time (even only one motor phase is powered at any time), because the sensors are always mounted between the phases. Thermocouple element type K phytron uses with the Type K (NiCr-Ni) in-vacuum and cryo stepper motors, thermal elements in the temperature range from 7 to +7 C, accuracy class. The Type K is a metal thermal element with nickel-based alloy conductors. Temperature ranges, accuracy and characteristics of thermal elements for industrial use are defined in the IEC 8 standard (temperature measuring with thermal elements) The accuracy of the temperature measuring depends on the temperature of the reference point. Resistance temperature detector (RTD) Pt phytron uses Pt resistor sensors in in-vacuum and cryo stepper motors in the temperature range to + C. These precise sensors are used in extreme industrial and laboratory conditions. They consist of a wound resistance wire that is mounted and unsupported inside a cylindrical ceramic case The evaluation of the temperature measuring is possible with the corresponding module in the phymotion TM controller. For the K type variations to some degree are possible. 详情联系 :TEL 87 QQ:78
10 详情联系 :TEL 87 QQ:78 Extreme Option: Shaft design G H I Dimensions Stepper motor Dimensions in mm Typ G H I VSS9,, VSS VSS,, VSS VSS, 8 VSS VSS VSS VSS VSS 7,, 8, 详情联系 :TEL 87 QQ:78
11 详情联系 :TEL 87 QQ:78 VSS data sheet... T (U = 7 V) VSS 9..,.. T (U = 7 V) VSS.., PSHAFT (U = 7 V). PSHAFT (U = 7 V) T (U = 7 V) VSS.., 7..8 T (U = 7 V) VSS..,... PSHAFT (U = 7 V). PSHAFT (U = 7 V) S d[ / i ]. VSS..,. T (U = 7 V) VSS..,. T (U = 7 V). PSHAFT (U = 7 V) PSHAFT (U = 7 V) T (U = 7 V) VSS.., 8 7 T (U = 7 V) VSS.., PSHAFT (U = 7 V) 7 PSHAFT (U = 7 V) 详情联系 :TEL 87 QQ:78
12 VSS data sheet 详情联系 :TEL 87 QQ:78 Extreme 8 T (U = 7 V) VSS.., 8 T (U = 7 V) VSS.., 9 9 PSHAFT (U = 7 V) PSHAFT (U = 7 V) T (U = 7 V) VSS 7.., Torque [Nm]. VSS T (U = V). PSHAFT (U = V) PSHAFT (U = 7 V) Torque [Nm] VSS. Torque [Nm] VSS.. T (U = V) 8 T (U = V) PSHAFT (U = V) PSHAFT (U = V) 详情联系 :TEL 87 QQ:78
13 详情联系 :TEL 87 QQ:78 VSS data sheet Electrical Connection -lead bipolar control Standard A B C D yellow red W W blue green Windings parallel W W A B C D yellow red W W blue green Windings in series W W 8-lead unipolar or bipolar control Phase Phase A E G B C H F D yellow black brown red blue violett weiß grün W W W W Begin of the winding Ordering Code The variable elements of the product are displayed in colour. Type Size Step resolution Rated current Option E Option VPGL Vacuum class Options Ordering code VSS / VSH.., - E - VGPL / - HV - KTC Options Size 9 - Rated current (A/Phase),,, for VSS9 to for VSS9 to 7 for VSS bis 7 for VSS8 bis Option E E Double shaft double shaft Option VGPL VPGL xx/xx Low backlash gear: size / reduction ratio gear Admissible phase currents for identical power dissipation -lead motor parallel windings rated current Bipolar control mode Full step operation -lead motor series windings % of the rated current Vacuum class Options FV HV UHV-S UHV-G UHV-C UHV-C KTC Pt RS X Fine vacuum High vacuum Ultra high vacuum dry coated bearing Ultra high vacuum greased bearing Ultra high vacuum Cryo temperature down to fluid Nitrogen Ultra high vacuum Cryo temperature down to liquid Helium Thermocouple type K Resistance temperature detector Resolver customised 详情联系 :TEL 87 QQ:78
ASM. Asynchronous Spindle Motors. SEM Limited Faraday Way Orpington, Kent BR5 3QT United Kingdom
NE ASM Asynchronous Spindle Motors SEM Limited Faraday Way Orpington, Kent BR 3QT United Kingdom Tel: +44 ()189 8847 Fax: +44 ()189 884884 Email: sales@sem.co.uk Web: www.sem.co.uk Version 4 August 2 Asynchronous
More informationHYBRID STEPPING MOTORS HY / HS / HN Series
HYBRID STEPPING MOTORS HY / HS / HN Series Long Life Compact Design Bipolar / Unipolar Models Holding Torque up to High Performances Series HS and HN Several Options available (Encoders, Gearboxes,Cables,
More informationLevel MEASUREMENT 1/2016
Level MEASUREMENT 1/2016 AGENDA 2 A. Introduction B. Float method C. Displacer method D. Hydrostatic pressure method E. Capacitance method G. Ultrasonic method H. Radar method I. Laser method J. Level
More informationA Journal of Practical and Useful Vacuum Technology. By Phil Danielson
A Journal of Practical and Useful Vacuum Technology From By Phil Danielson Thermal Conductivity Gauges Thermal conductivity pressure gauges are extremely common in vacuum technology, but an understanding
More information2/2-Way Proportional Valve (motor-driven)
2/2-Way Proportional Valve (motor-driven) Type 3280 can be combined with Seat valve with stepper motor - actuator isolated from flow path Excellent range (1:100) Low power consumption Fast response Orifice
More informationstepper motor 2-phase hybrid stepper motor (bipolar) high protection class with plug or stranded wires optional with encoder / brake
stepper motor 2-phase hybrid stepper motor (bipolar) high protection class with plug or stranded wires optional with / brake / 9 www.igus.de MOT-AN-S_EN_2070# part number (not configurable, only for illustration)
More informationInstrumentation & Data Acquisition Systems
Instrumentation & Data Acquisition Systems Section 3 -Level Robert W. Harrison, PE Bob@TheHarrisonHouse.com Made in USA 1 Level Section Question Which level measuring technology is the best solution when
More informationHow to specify a product. Process Sensors and Mechanical Instruments
How to specify a product Process Sensors and Mechanical Instruments Keep the overview. Here is some guideline information on how to specify our products. Intended as supplementary help to specification
More informationDual displacement motor A10VM Plug-in dual displacement motor A10VE for open and closed circuit applications
Replaces: 04.95 Dual displacement motor 10VM Plug-in dual displacement motor 10VE for open and closed circuit applications Size 28-60 Series 5 Nominal pressure 280 bar Peak pressure 350 bar 10VM Contents
More informationZHM ST Series. Technical Datasheet. Gear Flow Meters for lubricating, non lubricating, abrasive and corrosive fluids
www.kem-kueppers.com Technical Datasheet ZHM ST Series Gear Flow Meters for lubricating, non lubricating, abrasive and corrosive fluids Certified zertifiziert according gemäß to DIN DIN EN EN ISO ISO 9001
More informationSingle and double acting, magnetic, self-centering Bores: ø 16, 20, 25, 32, 40 mm
> Series CGPT self-centering parallel grippers with T-guide Series CGPT self-centering parallel grippers with T-guide Single and double acting, magnetic, self-centering Bores: ø 6, 20, 25, 32, 40 mm New
More informationElectric regulating valves Type CCMT 2 - CCMT 8 / CCMT 16 - CCMT 42
Data sheet Electric regulating valves Type CCMT 2 - CCMT 8 / CCMT 16 - CCMT 42 The CCMT is an electrically operated valve designed specifically for operation in CO 2 systems. The CCMT valve concept is
More informationTechnical Datasheet ZHA Series Gear Flow Meters Aluminum Version with ball bearing for lubricating media
www.kem-kueppers.com Technical Datasheet ZHA Series Gear Flow Meters Aluminum Version with ball bearing for lubricating media Certified zertifiziert according gemäß to DIN DIN EN EN ISO ISO 9001 9001 2
More informationRevision 2013 Vacuum Technology 1-3 day Good Vacuum Practice 1 Day Course Outline
Revision 2013 Vacuum Technology 1-3 day Good Vacuum Practice 1 Day Course Outline This training course outline is intended to cover the following: Introduction to vacuum Measurement Lubricated rotary pumps
More informationGripping rotary modules
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More informationScroll down to view your document!
Over years cumulative experience hour rush turnaround / technical support service Established in 99 The leading independent repairer of servo motors and drives in North America. Visit us on the web: www.servo-repair.com
More informationGas density monitor With integrated transmitter Model GDM-100-TI
SF 6 gas solutions Gas density monitor With integrated transmitter Model GDM-100-TI grid Products WIKA data sheet SP 60.05 for further approvals see page 5 Applications Gas density monitoring of closed
More informationbetter measurement Simply a question of SCHMIDT Flow Sensor SS The cost-effective alternative in pressurised systems up to 10 bars.
Simply a question of better measurement SCHMIDT Flow Sensor SS 20.261 The cost-effective alternative in pressurised systems up to 10 bars. Compressed air technology Industrial processes A cost analysis
More informationDTG - LCD Digital Temperature Gauge USER MANUAL
DTG - LCD USER MANUAL Page 1 of 7 USERS GUIDE page 1. Description 3 2. Function 3 3. Safety Instruction 3 3.1. Safety Conventions 3 3.2. Proper Use 3 4. Installation 4 4.1. Unpacking 4 4.2. Storage 4 4.3.
More informationMicro grippers HGPM/HGWM
HGPM/HGWM Miniaturised and optimised for assembly tasks Versatile 2004/10 Subject to change Products 2004/2005 1 / 1 HGPM/HGWM Key features HGWM HGPM 1 2 3 4 1 2 3 4 System product for handling and assembly
More informationAnalogue and Digital Mass Flow Meters and Controllers for Gases MASS-STREAM
Analogue and Digital Mass Flow Meters and Controllers for Gases MASS-STREAM M+W Instruments Your partner Key Facts M+W Instruments was founded in 1988 and has always specialised in thermal mass flow meters
More informationMicroscopy Cryogenic WORKSTATION. Performance by Design
CRYO Microscopy Cryogenic WORKSTATION Optical cryostat for use in microscopy and spectroscopy Performance by Design RC102-CFM Microscopy Cryostat offers fast cooldown, high efficiency, excellent temperature
More informationFixed Displacement Motor A4FM
Fixed Displacement Motor 4FM RE 91 12/4. replaces: 3.95 and RE 91 1 for open and closed circuits Sizes 22...5 Series 1, Series 3 Nominal pressure up to bar Peak pressure up to 45 bar Index Features 1 Ordering
More informationTurbine Flowmeters for Gas Applications (Metric)
Turbine Flowmeters for Gas pplications (Metric) Description Flow Technology s FT Series turbine flowmeters utilize a proven flow measurement technology to provide exceptionally reliable digital outputs.
More informationTH-1800-T TRX-700-CNG Converter
TH-1800-T TRX-700-CNG Converter low detector The CNG fuel gas flowmeter is so accurate as to meet a demand of measuring the CNG directly by making the most use of our well-established mini-thermal flowmeter
More informationENGLISH Datasheet IEC Miniature Thermocouple Connector Socket with Stainless Steel mounting bracket Types K, J, T, E, N, B & Copper (IEC Colour Code)
ENGLISH Datasheet IEC Miniature Thermocouple Connector Socket with Stainless Steel mounting bracket Types K, J, T, E, N, B & Copper (IEC Colour Code) Miniature size in-line Thermocouple Socket with stainless
More informationof ~ ±500 (Arc seconds), assuming interpolation in the drive electronics usually results in a total of 16,384 positions per revolution.
Automation What to Consider When Choosing a Rotary Encoder By Tom Wyatt, HEIDENHAIN Automation Division Manager, North America Controlled servo drives are used in many areas of automation technology, converting,
More informationDatasheet IEC & ANSI Miniature or Standard Quick Wire Thermocouple Connector Plug & Socket Type K in IEC or ANSI Colour code
Datasheet IEC & ANSI Miniature or Standard Quick Wire Thermocouple Connector Plug & Socket Type K in IEC or ANSI Colour code ENGLISH These quick connect versions allow rapid termination Miniature connector
More informationTurbine Flowmeters for Gas Applications
Turbine Flowmeters for Gas Applications Description Flow Technology s FT Series turbine flowmeters utilize a proven flow measurement technology to provide exceptionally reliable digital outputs. Because
More informationMass Flow Controller (MFC) for Gases
Mass Flow Controller (MFC) for Gases Bypass MFC with capillary technology for nominal flow rates from 5 ml N /min to 15 l N /min Applicable for aggressive gases Compact design and digital communication
More information38999 Space grade ESA/SCC Section. MIL-DTL Space Grade Circular Connectors
38999 Space grade ESA/SCC 3401 Section II MI-DT 38999 Space Grade Circular Connectors 59 38999 Space Grade ESA/SCC 3401 Contents 38999 Space Grade ESA/SCC 3401 SCC Specification.......................................................61
More informationTechnical Data Sheet MF010-O-LC
Technical Data Sheet MF010-O-LC - 1 - 1. Properties The oxygen measuring system MF010-O-LC determines the oxygen content in gas mixtures up to a temperature of 250 C. It is particularly suitable for the
More informationParallel grippers HGPM, micro
Key features G6: G8: G9: stroke compensation clamping spigot flange mounting At a glance Compact, handy design With open or closed gripper jaws Versatility thanks to externally adaptable gripper fingers
More informationFPG8601 Force Balanced Piston Gauge
FPG8601 Force Balanced Piston Gauge Reference Level Calibration System for very low pressure Pressure range: 0 to 15 kpa gauge, absolute and absolute differential Standard resolution: 0.010 Pa, high resolution
More informationFixed Displacement Plug-In Motor A2FE
www.phphyds.com Series 6, axial tapered piston, bent axis design for mounting in mechanical gearboxes Sizes 28...355 Nom. Pressure up to 400 bar Peak Pressure up to 450 bar he fixed displacement plug-in
More informationAMS 2710 PCB pressure sensor module with V output
FEATURES Universal pressure sensor module with 0.. 10 V voltage output Fully calibrated and temperature compensated sensor module Variants for (bidirectional) differential, gage, absolute and barometric
More informationACV-10 Automatic Control Valve
ACV-10 Automatic Control Valve Installation, Operation & Maintenance General: The Archer Instruments ACV-10 is a precision automatic feed rate control valve for use in vacuum systems feeding Chlorine,
More informationMass Flow Controller (MFC) for Gases
Mass Flow Controller (MFC) for Gases Type 8713 can be combined with... Direct flow measurement by MEMS- Technology for nominal flow rates from 1 ml N /min to 8 l N /min (N 2 ) High accuracy and repeatability
More informationTRZ 03-K Volumeter. Proven Technology. Superior Performance. TRZ 03-K Volumeter is a Turbine Gas Flowmeter for Secondary Gas Metering.
TRZ 0-K Volumeter TRZ 0-K Volumeter is a Turbine Gas Flowmeter for Secondary Gas Metering. TRZ 0-K Turbine Gas Flowmeter continues the tradition of Honeywell s field-proven turbine meter technology, delivering
More informationASDX Series Silicon Pressure Sensors
ASDX Series Silicon Pressure Sensors DESCRIPTION The ASDX Series is a Silicon Pressure Sensor offering a ratiometric analog interface for reading pressure over the specified full scale pressure span and
More informationGX-S. 2-jaw self centering radial pneumatic gripper (series GX-S) GX-S
GX-S 2-jaw self centering radial pneumatic gripper (series GX-S) Double acting. Very high gripping force at the end of the stroke. Long life and reliability, maintenance free. Various options for fastening.
More informationVariable Displacement Double Pump A20VO. Series 1, for open circuits Axial piston - swashplate design, Back to back - design
Brueninghaus Hydromatik Series 1, for open circuits Axial piston - swashplate design, Back to back - design RE 93100/02.97 Sizes 60...260 Nominal Pressure up to 350 bar Peak Pressure up to 400 bar Preliminary
More informationPressure transmitters EMP 2
Data sheet Pressure transmitters EMP 2 The high accuracy pressure transmitter EMP 2 is designed for monitoring and control in marine and industial applications and offers a reliable pressure measurement,
More informationGRIPPERS SERIES P3 - P12 ACTUATORS
GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Aluminum
More informationDisplacement 12, , Maximum flow rate (at 1450 rpm) bar.
00/07 ED PVD VARIABLE DISPLACEMENT VANE PUMPS SERIES 0 OPERATING PRINCIPLE The PVD pumps are variable displacement vane pumps with a mechanical type of pressure compensator. They allow instantaneous adjustment
More informationThe Principles of Vacuum Technology
The Principles of Vacuum Technology Vacuum Terminology Vacuum units Vacuum regimes How to measure vacuum. Gauge designs. How to create vacuum Pump classifications and designs UHV compatibility considerations
More informatione2c 20 - easy to connect
closer contacts Fieldbus Communications e2c 20 - easy to connect e2c 20 / IP 20 Distributed I/O System for Switch Cabinets Switch cabinets and distribution boxes continue to rely on wiring systems that
More informationGripping modules Pneumatic 2-finger parallel gripper Long-stroke gripper for small components Gripping force 120 N..
GM Sizes 85.. 205 Mass 0.48 kg.. 2.7 kg 120 N.. 595 N Stroke per finger 16 mm.. 30 mm Workpiece weight, force-fit gripping Up to 2.3 kg Application example 3 5 3 4 2 5 2 1 1 Pneumatic double pick & place
More informationTurbine Flowmeters for Gas Applications
Turbine Flowmeters for Gas Applications Description Flow Technology s FT Series turbine flowmeters utilize a proven flow measurement technology to provide exceptionally reliable digital outputs. Because
More informationDELTI. Vac. DELTI-Vac MIL. Application. Principle. Characteristic
- MIL - presents the most complex versatile and variable system for stability Application Monitoring of chemical stability is essential for reliable risk and safety management of single or double based
More informationAMS 6916 Board mount pressure sensor with ratiometric analog output
FEATURES Piezoresistive pressure sensor with amplified analog output Calibrated and temperature compensated Ratiometric voltage output, 0.5 4.5 V Digital signal conditioning, 12 bit output resolution Differential,
More informationVACGEN. Vacuum Components. Product Overview
VACGEN Product Overview WHY CHOOSE US? In 1964 the Vacuum Generators company was formed in East Grinstead, UK, by Dr Bernard Eastwell and Vic Treasure with a single product - the CR38 all metal right angled
More informationVacuum Systems and Cryogenics for Integrated Circuit Fabrication Technology 01
INAOE. Tonantzintla, Mexico. 2010-06-23. June 23 rd, 2010 Vacuum Systems and Cryogenics for Integrated Circuit Fabrication Technology 01 Joel Molina INAOE Microelectronics Group jmolina@inaoep.mx 1 Vacuum
More informationVPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES 10
/ ED VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES OPERATING PRINCIPLE The VPPL are variable displacement axial-piston pumps with variable swash plate, suitable for applications
More informationDatasheet ANSI Standard Duplex Thermocouple Connector Sockets Types K, J, T, E, N, R/S & B (ANSI Colour Code)
Datasheet ANSI Standard Duplex Thermocouple Connector Sockets Types K, J, T, E, N, R/S & B (ANSI Colour Code) ENGLISH Duplex (2-channel) standard connector that accepts solid, round plug pins Bodies supplied
More informationDatasheet ANSI Type K & T Exposed Welded Tip Thermocouples (ANSI Colour Code)
Datasheet ANSI Type K & T Exposed Welded Tip Thermocouples (ANSI Colour Code) ENGLISH Thermocouple types K & T to ANSI MC96.1 Fast response, welded exposed junction 1, 2, 5 or 10-metre-long Teflon PFA
More informationExercise 3. Power Versus Wind Speed EXERCISE OBJECTIVE DISCUSSION OUTLINE. Air density DISCUSSION
Exercise 3 Power Versus Wind Speed EXERCISE OBJECTIVE When you have completed this exercise, you will know how to calculate the power contained in the wind, and how wind power varies with wind speed. You
More informationSF 6 Product Guide. Gas Analysis Instruments and Accessories
SF 6 Product Guide Gas Analysis Instruments and Accessories Cambridge Sensotec Ltd specialises in the design and manufacture of gas analysis equipment under the Rapidox brand name. Based in the UK, the
More informationInverse Proportional Pressure-Relief Cartridge, Size 10
Inverse Proportional Pressure-Relief Cartridge, Size 1 Q max = 12 l/min, p max = 3 bar Seated pilot, spool-type main stage, damped design 1 Description inverse-proportional pressure-relief valves are size
More informationThis educational seminar discusses creating, measuring, and troubleshooting Rough Vacuum.
This educational seminar discusses creating, measuring, and troubleshooting Rough Vacuum. Specifically, today s talk will cover: Brief review of Vacuum Fundamentals Applications Using Rough Vacuum Rough
More informationP9000 DESCRIPTION. For parts requiring RoHS compliance, please contact factory. P February /6
P9000 High accuracy through digital compensation High thermal stability Rugged stainless steel construction Ideal for test stands High burst pressure limit DESCRIPTION The P9000 Series is a range of advanced,
More informationEquipment Accuracy / Selection
Revision 5.0: Included the PPP program for clarification. Revision 6.0: Update references for CTL PDSH 251B to CTL DSH 251E" Added leakage current tolerances for values above 5KHz For Client Labs Purpose
More informationResidual Gas Analysis Systems for Industry
HIDEN RC SYSTEMS QUADRUPOLE MASS SPECTROMETERS FOR RGA, GAS ANALYSIS AND PROCESS MONITORING The HAL RC systems are designed for RGA, gas analysis and process monitoring applications including leak detection,
More informationENGLISH. Datasheet L60 Thermocouple & Fine Wire Welder
Datasheet L60 Thermocouple & Fine Wire Welder ENGLISH The Thermocouple Welder is a compact, simple-to-use instrument designed for thermocouple and fine wire welding It is primarily designed for use by
More informationProduct information. Capacitive. Level detection in liquid VEGACAP 62 VEGACAP 63 VEGACAP 64 VEGACAP 66 VEGACAP 69. Document ID: 29983
Product information Level detection in liquid VEGACAP 62 VEGACAP 63 VEGACAP 64 VEGACAP 66 VEGACAP 69 Document ID: 29983 Contents Contents 1 Description of the measuring principle... 3 2 Type overview...
More informationuser leaflet GAUGING TRANSDUCERS
user leaflet Solartron Metrology Gauging Transducers are high precision measurement probes intended for all gauging applications demanding high accuracy and a high degree of repeatability. The one piece
More informationTurbine Flowmeters for Liquid Applications (Metric)
Turbine Flowmeters for Liquid pplications (Metric) Description Flow Technology s FT Series turbine flowmeters utilize a proven flow measurement technology to provide exceptionally reliable digital outputs.
More informationProportional Pressure-Relief Cartridge Valve, Size 2...4
Proportional Pressure-Relief Cartridge Valve, Size... Q max = l/min, p max = 3 bar Direct acting, electrically operated 1 Description proportional pressure-relief valves are direct acting screw-in cartridges
More informationGlass tube flowmeters Series 2000
Glass tube flowmeters Series 2000 Variable area flowmeter for low flows of liquids and gases Short mounting length and compact construction, especially indicated for control panels Easy installation. No
More informationThe Experts in Vacuum Solutions
By Woodrow Farrow - Reprinted with permission from Specialty Gas Report Vacuum: a space that is relatively empty of matter, especially when that void has been created through artificial means. The earth
More informationENGLISH Datasheet IEC PTFE Exposed Welded Tip Thermocouples with Miniature Thermocouple Plug
ENGLISH Datasheet IEC PTFE Exposed Welded Tip Thermocouples with Miniature Thermocouple Plug Thermocouple types K, J & T Fast response, welded exposed junction 1, 2, 5 or 10 metre lengths available Teflon
More informationInformation Sheet. About this information sheet. Floor and wall loadings. Attachment of process module to floor. PlasmaPro Estrelas100
Information Sheet PlasmaPro Estrelas100 About this information sheet This data sheet provides basic information about the installation of a PlasmaPro Estrelas100 tool. Some of the information in this sheet
More information(TRCM) Wire Wound RF SMD Inductor
Version: February 17, 2017 (TRCM) Wire Wound RF SMD Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New
More informationTECHNICAL DESCRIPTION
TECHNICAL DESCRIPTION Exhaust Hose Reel ser. 865, electric motor driven No. 981118101 Description Limit switches, for hose coiling and uncoiling integrated in drive unit. Motor turns drum via a planetary
More informationDimensions. Technical Data General specifications Switching element function Rated operating distance s n 5 mm
Dimensions M18x1 37 40 4 0102 24 LED Model Number Features 5 mm embeddable Usable up to SIL2 acc. to IEC 61508 Connection BN BU Accessories L+ L- EXG-18 Quick mounting bracket with dead stop BF 18 Mounting
More informationTorque Tube TB300 Digital Transmitters
Page 1 of 7 7E.300-E Issue 4-2009 Description Series TB300 torque tube liquid level instruments utilize the buoyancy exerted on a displacer when immersed in a liquid. The buoyancy on the displacer is proportional
More informationFiltered compressed air, lubricated or non-lubricated. Maximum torque on each jaw on opening at 87 psi 3.1 in-lbf 10.6 in-lbf 20.
2-JAW SELF-CENTERING RADIAL PNEUMATIC GRIPPER (SERIES ) Double-acting. High gripping force at the end of the stroke. Maintenance-free long life and reliability. Various options for fastening. Optional
More informationInstrumentation & Data Acquisition Systems
Instrumentation & Data Acquisition Systems Section 4 - Pressure Robert W. Harrison, PE Bob@TheHarrisonHouse.com Made in USA 1 Definition of Pressure Pressure is the amount of force applied perpendicular
More informationHigh flow rate. Cost effective. Compliant. Gripper with GSW-B Shaft Interface and Compensation Unit
GSW-B-AGE High flow rate. Cost effective. Compliant. Gripper with GSW-B Shaft Interface and Compensation Unit PGN-plus / PZN-plus universal gripper with shaft interface GSW-B and AGE compensation unit
More informationAC : MEASUREMENT OF HYDROGEN IN HELIUM FLOW
AC 2010-2145: MEASUREMENT OF HYDROGEN IN HELIUM FLOW Randy Buchanan, University of Southern Mississippi Christopher Winstead, University of Southern Mississippi Anton Netchaev, University of Southern Mississippi
More informationPLD 03 T A CASAPPA S.p.A.
GEAR FLOW DIVIDERS INDEX Section Page GENERAL FEATURES... 3 GENERAL DATA... 5 FLOW EQUALIZER... 6 FLOW DIVIDERS... 8 TYPICAL CIRCUITS... 10 NOTES ABOUT COMPOSITION... 12 PORTS DIMENSIONS.... 14 GROUP DIMENSIONS...
More informationExpert Hydrostatic Level Transmitters
Expert Hydrostatic s General Features MJK Expert hydrostatic level transmitters are designed for level measurement by submerging the transmitter in open channels, drains and tanks. Expert hydrostatic level
More informationHigh-performance submersible pressure transmitter For level measurement Model LH-10
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-10 WIKA data sheet PE 81.09 Applications Level measurement in rivers and lakes Deep well
More informationDesign. Pompetravaini-NSB API SB Liquid Ring Compressor for Gas Processing. Working Principle
SB Pompetravaini-NSB API SB Liquid Ring Compressor for Gas Processing A family of API liquid ring compressors has been developed and has been in the market for nearly a decade, they are specifically made
More informationInverse Proportional Pressure-Relief Cart., Size 2 4
Inverse Proportional Pressure-Relief Cart., Size Q max = l/min, p max = 5 bar Direct acting, electrically operated 1 Description inverse proportional pressure-relief valves are direct acting screw-in cartridges
More informationThe Broadest Gauging Line in the Industry
The Broadest Gauging Line in the Industry Vacuum Measurement Varian s broad line of vacuum gauge controllers and gauge tubes are the most reliable, accurate, and economical means of measuring, monitoring,
More informationIEC Thermocouple Extension Leads with Miniature or Standard Thermocouple Connectors - Available in types K, J, T & N
Datasheet ENGLISH IEC Thermocouple Extension Leads with Miniature or Standard Thermocouple Connectors - Available in types K, J, T & N (Note: Illustration shows Type T with standard connectors and Type
More informationDIAPHRAGM VACUUM PUMPS AND COMPRESSORS
DIAPHRAGM VACUUM PUMPS AND COMPRESSORS DATASHEET N 2400 N 2400.15 ST.9 E Concept The diaphragm pumps from KNF arebased on a simple principle an elastic diaphragm, ixed on its edge, moves up and down its
More informationSPG. Application example. Pneumatic 2-Finger Parallel Gripper Heavy-load Gripper. Weight 35 kg. Stroke per finger 100 mm.
SPG Size 100 Weight 35 kg 10,000 N Stroke per finger 100 mm Workpiece weight 50 kg Application example Gripper unit for heavy V8 engine blocks. SPG 100 2-Finger Heavy-load Gripper 446 www.schunk.com SPG
More informationIntroduction of Vacuum Science & Technology. Diffusion pumps used on the Calutron mass spectrometers during the Manhattan Project.
Introduction of Vacuum Science & Technology Diffusion pumps used on the Calutron mass spectrometers during the Manhattan Project. 1 What is a vacuum? 760 mm Hg Vacuum ATM A vacuum is defined as less than
More informationGP1 & GP2. Electropneumatic Regulators FOR PRESSURE CONTROL TO 1,000 PSI
GP1 & GP2 Electropneumatic Regulators FOR PRESSURE CONTROL TO 1, PSI GP1 & GP2 Functional Description The GP series control valve is an electronic pressure regulator designed to precisely control the pressure
More informationsolids Rotary Valves Type ZRS
Discharge and metering rotary valve, for discharge of silos and/or feed into pressure or vacuum conveying pipelines ; even for dust explosion hazardous products Advantages: Sturdy and less wear Cost-effective
More informationAMS 6915 Board mount pressure sensor with digital output (I²C)
Board mount pressure sensor with digital output (I²C) FEATURES Calibrated and temperature compensated pressure sensor with digital output (I²C) Differential, relative (gage), bidirectional differential,
More informationCFSW. Hinges with built-in safety multiple switch
CFSW. Hinges with built-in safety multiple switch ELESA Original design technical informations Material - Hinge body: self-extinguish high-rigidity SUPER-technopolymer, black colour. Resistant to solvents,
More informationOxygen Measurement Systems High Reliability and Wide Application Coverage
Introduction High Process Efficiency Under Any Condition Oxygen Measurement Systems High Reliability and Wide Application Coverage METTLER TOLEDO provides sensors to measure dissolved oxygen (DO) in demanding
More informationFAS-W. Features. Applications. Automatic condensation hygrometer
FAS-W HUMIDITY ANALYZER Automatic condensation hygrometer the «FAS-W» Moisture Analyzer automatic condensation hygrometer can measure both the volume fraction of moisture and the dew point temperature
More informationTechnical Data. General specifications. Rated operating distance s n 5 mm
0102 Model Number Features 5 mm flush Usable up to SIL 2 acc. to IEC 61508 Accessories EXG-18 Quick mounting bracket with dead stop BF 18 Mounting flange, 18 mm Technical Data specifications Switching
More informationLow Profile Load Cells
Low Profile Load Cells World Leading Performance With Improved Linearity, Hysteresis, Creep & Thermal Performance Introducing Interface s Enhanced Low Profile Load Cell Interface Inc. pioneered the first
More informationINSTRUMENTS A THERMAL MASS FLOW SENSOR USING A CONSTANT DIFFERENTIAL TEMPERATURE ABOVE THE AMBIENT GAS TEMPERATURE
TELEDYNE HASTINGS TECHNICAL PAPERS INSTRUMENTS A THERMAL MASS FLOW SENSOR USING A CONSTANT DIFFERENTIAL TEMPERATURE ABOVE THE AMBIENT GAS TEMPERATURE Proceedings of FEDSM 98 1998 ASME Fluids Engineering
More information