Proportional Valve Group PVG 32 Order Specifications

Size: px
Start display at page:

Download "Proportional Valve Group PVG 32 Order Specifications"

Transcription

1 MKING MORN LIVING POSSIL Technical Information Proportional Valve Group powersolutions.danfoss.com

2 Revision History Table of Revisions ate hanged Rev Feb 214 onverted to anfoss layout IT MS J Feb 26 Jan 212 Various changes J Jan 2 New dition 2 2L1 Rev J Feb 214

3 ontents Order specification Please state:... 4 Standard and option assembly... 4 Reordering... 4 Pressure setting limits...4 PVG 32 order specification form... 6 Standard F spools... 7 Standard F spools, hydraulic actuation... 8 F spools for mechanical float position, PVMF...8 F spools for friction detent, PVMR... 8 F spools with linear flow characteristic...9 Standard P spools...1 Standard P spools, hydraulic actuation...11 PV, basic valves...12 PVP, pump side module PV, electrical actuation L1 Rev J Feb 214 3

4 Order specification The form can be obtained from the anfoss Sales Organization. n order form for PVG 32 hydraulic valve is shown on the page PVG 32 order specification. oth the module selection chart on the previous pages and the order form are divided into fields, 1112, 13, 14, 1, a, b, and c. ach module has its own field: : Pump side module PVP Plug for external pilot oil supply PVP lectrical LS unloading valve PVPX 112: asic valves PV 13: Main spool PVS a: Mechanical actuator PVM (or PV when option mounted) b: Shock and suction valve PVLP Suction valve PVL c: over for mechanical actuation PVM over for hydraulic actuation PVH lectrical actuators PV (or PVM when option mounted) 14: nd plate PVS 1: ssembly kit PVS Standard and option assembly Reordering Pressure setting limits Please state: ode numbers of all modules required Required setting (P) for pump side module Required setting of LS / pressure limiting valves, see pressure setting guidance below. The PVG 32 valve group is assembled the way the module selection chart shows if the code number for PVM is written in field 'a', and the code number for PVM, PV or PVH in field 'c'. The valve group is assembled so that the mechanical actuator is mounted on the opposite end of the basic module, if the code number for PVM is written in field 'c' of the order form and the code numbers for PVM, PV or PVH in field 'a'. The space at the top righthand corner of the form is for anfoss to fill in. The code number for the whole of the specified valve group (PVG No.) is entered here. In the event of a repeat order all you have to do is enter the number anfoss has given on the initial confirmation of order. The maximum setting pressure for the pressure limiting valves LS or LS depends on the chosen pressure setting for shock valve PVLP. The maximum values recommended to avoid interaction can be read in the following table. 4 2L1 Rev J Feb 214

5 Order specification The figures in the table have been calculated according to the following expressions: PVLP 1 bar: LS /.8 P PVLP PVLP >1 bar: P PVLP LS / 3 bar. Max. pressure setting of LS and LS valves relative to PVLP shock valve Pressure setting for PVLP bar psi Max. for LS / bar Min. for LS / psi bar [43 psi] L1 Rev J Feb 214

6 Order specification PVG 32 order specification form Separate specification pads are available under the literature no. 2L1. 6 2L1 Rev J Feb 214

7 Standard F spools PV is with LS / shuttle valve ode number PV is without LS / shuttle valve Press. compensated flow: l/min [US gal/min] ISO symbol Symbol Press. compensated flow l/min [US gal/min] F 13 [34.3] [1.6] [1.6] 6 1 F 13 [34.3] losed neutral position Throttled, open neutral position way, 3position losed neutral position, P way, 3position losed neutral position, P Throttled, T in neutral position Throttled, T in neutral position way, 4position losed neutral position Float P F 2L1 Rev J Feb 214 7

8 Standard F spools, hydraulic actuation PV is with LS / shuttle valve ode number PV is without LS / shuttle valve Press. compensated flow: l/min [US gal/min] ISO symbol Symbol Press. compensated flow: l/min [US gal/min] [1.6] [1.6] closed neutral position Throttled open neutral position F spools for mechanical float position, PVMF PV is with LS / shuttle valve ode number PV is without LS / shuttle valve Press. compensated flow: l/min [US gal/min] ISO symbol Symbol Press. compensated flow l/min [US gal/min] F 13 [34.3] [1.6] [1.6] 6 1 F 13 [34.3] way, 4 position losed neutral position P F way, 4position losed neutral position Float P F F spools for friction detent, PVMR PV is with LS / shuttle valve ode number PV is without LS / shuttle valve Press. compensated flow: l/min [US gal/min] ISO symbol Symbol Press. compensated flow: l/min [US gal/min] [1.6] [1.6] L1 Rev J Feb 214

9 PV is with LS / shuttle valve ode number PV is without LS / shuttle valve closed neutral position Throttled open neutral position F spools with linear flow characteristic PV is with LS / shuttle valve ode number PV is without LS / shuttle valve Press. compensated flow: l/min [US gal/min] ISO symbol Symbol Press. compensated flow: l/min [US gal/min] F 13 [34.3] [1.6] [1.6] F 13 [34.3] losed neutral position Throttled, open neutral position 9794 Throttled, T in neutral position 984 T in neutral position 2L1 Rev J Feb 214 9

10 Standard P spools PV is with LS / shuttle valve ode number PV is without LS / shuttle valve Press. compensated flow: l/min [US gal/min] ISO symbol Symbol Press. compensated flow: l/min [US gal/min] [1.6] [1.6] losed neutral position, P and Throttled, open neutral position, P and losed neutral position, P losed neutral position, P Throttled, open neutral position, P Throttled, open neutral position, P Throttled, T neutral position, P 1 2L1 Rev J Feb 214

11 PV is with LS / shuttle valve ode number PV is without LS / shuttle valve Throttled, T neutral position, P Standard P spools, hydraulic actuation PV is with LS / shuttle valve ode number PV is without LS / shuttle valve Press. compensated flow: l/min [US gal/min] ISO symbol Symbol Press. compensated flow: l/min [US gal/min] [1.6] [1.6] losed neutral position, P and losed neutral position, P losed neutral position, P 2L1 Rev J Feb

12 PV, basic valves c a 14 1 c b V PV, basic valves escription No facilities for shock valves and Facilities for shock valves and G ½ UNF G ½ UNF Without compensator /check valve With check valve With check valve and LS/ shuttle valve With compensator valve L1 Rev J Feb 214

13 PV, basic valves (continued) escription No facilities for shock valves and Facilities for shock valves and G ½ UNF G ½ UNF With damped compensator valve With compensator valve, LS/ relief valve and LS/ shuttle valve With damped compensator valve, LS/ relief valve and LS/ shuttle valve Weight kg [lb] 3.1 [6.8] 3. PVP, plugs escription G ½ ½ in 2 Weight kg [lb] xternal pilot supply xternal pilot supply incl. check valve PVM, mechanical actuation escription lu lu anodized ast iron ngle with stop screws without stop screws with stop screws with stop screws Standard , /37, Standard with base, without arm and button , /37, Standard without base, without arm and button Weight kg [lb].4 [.9].8 [1.8] PVS, assembly kit ode no PV s PV + PVPVM Weight kg [lb] [.2].1 [.3].2 [.6].3 [.7].4 [.9].4 [1.]. [1.1].6.6 [1.4].7 [1.6].8 [1.7].8 [1.8].9 [2.] PVP, pump side module PVP, pump side module escription Without pilot supply With pilot supply Open center for PV for PV with facilit. for PVPX for PV for PV and facilit. for PVPX for PV and pilot oil pressure takeoff P = G1/2, T = G3/ P = 7/8 14, T = 11/ for PVH and pilot oil pressure takeoff 2L1 Rev J Feb

14 PVP, pump side module (continued) escription Without pilot supply With pilot supply losed center for PV for PV with facilit. for PVPX for PV for PV and facilit. for PVPX for PV and pilot oil pressure takeoff for PVH and pilot oil pressure takeoff P = G3/4, T = G3/ P = 1 1/16 12, T = 11/ P = G1/2, T = G3/4, P = 7/8 14, T = 11/ P = G3/4, T = G3/4, P = 11/16 12, T = 1 1/ Weight kg [lb] 3 PVPX, electrical LS pressure relief valves escription/ Supply voltage ode No. Hirsch. ode No. MP Weight kg [lb] Normally open 12 V [.7] 24 V Normally closed 12 V V Normally open with manual override 12 V V Plug [.13] PVS and PVSI, end plate escription SP S Weight kg [lb] PVS, without connections [1.1] PVS, with LX connection G 1/8 [3/8 24 UNF] PVSI, without connections [3.6] PVSI, with LX connections G 1/4 [1/2 2 UNF] PVLP, shock/ and anticavitation valves ode no Settings bar psi ode no Settings bar psi L1 Rev J Feb 214

15 PV, electrical actuation PV, electrical actuation escription ode No. Weight kg [lb] Hirsch MP eut. PVO, onoff 12 V V PVOR, on/off 12 V PVM, prop. medium Standard PVM, prop. medium Float > PV, active fault mon. PV, passive fault mon. PVI, active fault mon. PVI, passive fault mon. PVH active fault mon. PVH passive fault mon. PVH float >, act. fault PVH float >, act. fault PVH I active fault mon. PVH I passive fault mon. PVS, active fault mon. PVS, passive fault mon. 24 V V [2.] 24 V V [2.2] 24 V [2.] 1. [2.2] PVM, PVMR, PVMF, PVH covers escription ode No. Material nodized Weight PVM over for PV PVMR (Friction etent) PVMF (Mech. float position) kg [lb] 171 aluminium no.1 [.2] cast iron N/.9 [2.] 174 aluminium no.3 [.6] 1712 yes yes 1724 cast iron N/ 17 aluminium no Hydraulic actuation PVH 9/1618 UNF 177 aluminium no.2 [.4] 171 yes 1714 cast iron N/ Hydraulic actuation PVH G1/4 178 aluminium no cast iron N/.9 [2.] yes 2L1 Rev J Feb 214 1

16 PVL, anticavitation valve escription ode No. Weight kg [lb] Plug or Valve or L1 Rev J Feb 214

17 2L1 Rev J Feb

18 18 2L1 Rev J Feb 214

19 2L1 Rev J Feb

20 Products we offer: ent xis Motors losed ircuit xial Piston Pumps and Motors isplays lectrohydraulic Power Steering lectrohydraulics Hydraulic Power Steering Integrated Systems Joysticks and ontrol Handles Microcontrollers and Software Open ircuit xial Piston Pumps Orbital Motors PLUS+1 GUI Proportional Valves Sensors Steering Transit Mixer rives anfoss Power Solutions is a global manufacturer and supplier of highquality hydraulic and electronic components. We specialize in providing stateoftheart technology and solutions that excel in the harsh operating conditions of the mobile offhighway market. uilding on our extensive applications expertise, we work closely with our customers to ensure exceptional performance for a broad range of offhighway vehicles. We help OMs around the world speed up system development, reduce costs and bring vehicles to market faster. anfoss Your Strongest Partner in Mobile Hydraulics. Go to for further product information. Wherever offhighway vehicles are at work, so is anfoss. We offer expert worldwide support for our customers, ensuring the best possible solutions for outstanding performance. nd with an extensive network of Global Service Partners, we also provide comprehensive global service for all of our components. Please contact the anfoss Power Solution representative nearest you. omatrol SchwarzmüllerInverter Turolla Valmova HydroGear aikinsaueranfoss Local address: anfoss Power Solutions US ompany 28 ast 13th Street mes, I 1, US Phone: anfoss Power Solutions GmbH & o. OHG Krokamp Neumünster, Germany Phone: anfoss Power Solutions ps Nordborgvej 81 K643 Nordborg, enmark Phone: anfoss Power Solutions (Shanghai) o. Ltd. uilding #22, No. 1 Jin Hai Rd Jin Qiao, Pudong New istrict Shanghai, hina 2126 Phone: anfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. anfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. ll trademarks in this material are property of the respective companies. anfoss and the anfoss logotype are trademarks of anfoss /S. ll rights reserved. 2L1 Rev J Feb anfoss /S, 214

Proportional Valve Group PVG 32 minibooster

Proportional Valve Group PVG 32 minibooster Technical Information Proportional Valve Group powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev February 2018 Add new modules 0201 August 2015 Drawing updated 00.04 February

More information

Service and Parts Manual Proportional Valves PVG 100 powersolutions.danfoss.com

Service and Parts Manual Proportional Valves PVG 100 powersolutions.danfoss.com MAKING MODERN LIVING POSSIBLE Service and Parts Manual Proportional Valves PVG 100 powersolutions.danfoss.com Contents Function PVG 100 sectional drawing...3 Installation Installation and plug orientation...4

More information

PVG 32 Using flow or pressure control spools

PVG 32 Using flow or pressure control spools Application Guide PVG 32 powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev Feb 2017 First edition 0101 2 Danfoss Feb 2017 AB00000079en-US0101 About this document References

More information

Flow Dividers Type FD

Flow Dividers Type FD Technical Information Flow Dividers Type FD powersolutions.danfoss.com 2 Danfoss Jul 2017 BC00000389en-US0101 FD (950 Series) Hydraulic Flow Divider OVERVIEW White Drive Products flow dividers represent

More information

Orbital Motors OMSW with brake nose

Orbital Motors OMSW with brake nose MAKING MODERN LIVING POSSIBLE Technical Information Orbital Motors OMSW with brake nose powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev October 214 Changed to Danfoss layout

More information

MAKING MODERN LIVING POSSIBLE. Technical Information. Orbital Motor VMP. powersolutions.danfoss.com

MAKING MODERN LIVING POSSIBLE. Technical Information. Orbital Motor VMP. powersolutions.danfoss.com MAKING MODERN LIVING POSSIBLE Technical Information Orbital Motor VMP powersolutions.danfoss.com Revision History Table of Revisions Date Changed Rev Feb 214 New dimension drawings. Converted to Danfoss

More information

Seal Kits for Orbital Motors. Tech Note

Seal Kits for Orbital Motors. Tech Note for Orbital Motors Revisions Revision History Table of Revisions Date Page Changed Rev Jul 2007 All First edition AA Sep 2007 AB May 2010 12 Japan location BA Sep 2010 12 New back cover BB Jan 2011 3-5

More information

Orbital Motors Type VMP. Technical Information

Orbital Motors Type VMP. Technical Information Orbital Motors Type VMP Technical Information A Wide Range of Orbital Motors Revision View Date Page Changed Revision May 213 All First edition AA F31 245 A Wide Range of Orbital Motors Sauer-Danfoss is

More information

OMS, OMT and OMV Orbital Motors. Technical Information

OMS, OMT and OMV Orbital Motors. Technical Information , OMT and OMV Orbital Motors Technical Information , OMT and OMV A Wide Range of Orbital Motors Revision History Table of Revisions Date Page Changed Rev ED Dimensions changed EF A Wide Range of Orbital

More information

Proportional Valve Group PVG 32

Proportional Valve Group PVG 32 Technical Information Proportional Valve Group PVG 32 powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev November 2017 Dimenions section changes. 0803 August 2017 Added informational

More information

Xpress L90LS Directional Control Valve. Catalog HY /UK December, 2001

Xpress L90LS Directional Control Valve. Catalog HY /UK December, 2001 Xpress L90LS Directional Control Valve Catalog HY17-8525/UK December, 2001 Catalogue HY17-8525/UK Technical Information Xpress - general information Xpress is a valve-customization service that enables

More information

SDM to 8 sections monoblock valve D1WWDA02A

SDM to 8 sections monoblock valve D1WWDA02A SDM 1 SDM1 1 to 8 sections monoblock valve D1WWDA2A SDM1 Additional information This folder shows the product in the most standard configurations. Please contact Sales Dpt. for more detailed information

More information

Logic Elements Screw-in Cartridge Valves Pressures to 290 bar (4200 psi) Flows to 303 l/min (80 USgpm)

Logic Elements Screw-in Cartridge Valves Pressures to 290 bar (4200 psi) Flows to 303 l/min (80 USgpm) Vickers artridge Valves Logic Elements Screw-in artridge Valves Pressures to 9 bar ( psi) Flows to l/min (8 USgpm) Revised 9/98 7 ontents MODEL DESRIPTION TYPIL PPLITION PRESSURE bar (psi) RTED FLOW l/min

More information

1 LS unloading (control valve, orifice, none) 2 LS max pressure relief. 3 Spool type

1 LS unloading (control valve, orifice, none) 2 LS max pressure relief. 3 Spool type Flow Control Valve Series LVM.. high flow rates (8 l/min) flow rates are unaffected by temperature change or when the higher load pressure alternates between the outlet ports proportional flow-sharing

More information

L125 SERIES POST-COMPENSATED SECTIONAL LOAD SENSE VALVE

L125 SERIES POST-COMPENSATED SECTIONAL LOAD SENSE VALVE L15 SERIES POST-COMPENSATED SECTIONAL LOAD SENSE VALVE TAKE CONTROL Take control with Muncie Power Products L15 directional control valve. The L15 is constructed with high-grade, iron castings and nickel-plated

More information

R S 280 is a modular parallel sect. Directional Control Valve RS RS In relation to its flow capacity its installation

R S 280 is a modular parallel sect. Directional Control Valve RS RS In relation to its flow capacity its installation Directional Control Valve RS 280 3 RS 2802 3102RS28001 R S 280 is a modular parallel sect nal valve. Suitable applications are medium sized and big truck loaders, medium sized backhoe loaders and other

More information

LV LOADER DIRECTIONAL CONTROL VALVES INSTALLATION & USER GUIDE

LV LOADER DIRECTIONAL CONTROL VALVES INSTALLATION & USER GUIDE LV LOADER DIRECTIONAL CONTROL VALVES INSTALLATION & USER GUIDE SPECIFICATIONS: 10 gpm (38 lpm) Nominal Capacity. Rated up to 4000 psi (275 bar). Port Sizes-Inlet/Outlet #8SAE (3/4-16). Work Ports #8SAE

More information

Axial piston pumps type PVC

Axial piston pumps type PVC www.atos.com Table TA16-1/E Axial piston pumps type PV variable displacement, by a full line of mechanical controls PV are variable displacement axial piston pumps for medium pressure operation, low noise

More information

Axial piston pumps type PVC

Axial piston pumps type PVC www.atos.com Table TA16SK-1/E Axial piston pumps type PV variable displacement, by a full line of mechanical controls PV are variable displacement axial piston pumps for medium pressure operation, low

More information

Monoblock Directional Control Valve RMB 202

Monoblock Directional Control Valve RMB 202 Monoblock Directional Control Valve RMB 202 Key valve features RMB 202 is a 2-section mono block valve, especially designed for front-end loaders. The valve is prepared for quick connecting couplings,

More information

Pressure Reducing Valves Catalog Quick Reference

Pressure Reducing Valves Catalog Quick Reference Quick Reference Pressure Reducing, Non-Relieving Model No. Description Flow* Pressure Page 2 CP20-2 SDC0- Pressure Reducing, 20 bar PR - 5 PRC 06 NCS06/ Non-Relieving, Direct Acting [000 psi] 5 bar [4500

More information

Cartridge Valves Technical Information Motor Mount HICs Quick Reference

Cartridge Valves Technical Information Motor Mount HICs Quick Reference Quick Reference Symbol Description Order No. Page DH/DS MOUNT OMP/OMR/OMH MOUNT OMS MOUNT OMT MOUNT mount HIC Test lock 1125 15.21 1 1 2 2 3 3 4 4 P14 Symbol Description Model No. Page Dual counterbalance

More information

Directional Control Valves Technical Information Model 1500

Directional Control Valves Technical Information Model 1500 Single spool monoblock valve. 26.4 l/min [7 US gal/min] maximum flow. 138 bar [2 psi] maximum pressure with relief. 27 bar [3 psi] maximum pressure without relief. Garden tractors, mowers, utility equipment,

More information

Cartridge Valves Technical Information. Pressure Reducing, Quick Reference

Cartridge Valves Technical Information. Pressure Reducing, Quick Reference Quick Reference Pressure Reducing, Non-Relieving Model No. Description Flow* Pressure Page CP20-2 PRC 06 SDC10- NCS06/ Pressure Reducing, Non-Relieving, Direct Acting 40 l/min [10 US gal/min] 40 l/min

More information

Leak-Free Load-Control Valve SAE ½ psi flange

Leak-Free Load-Control Valve SAE ½ psi flange Leak-Free Load-Control Valve SE ½ - 6000 psi flange Q max = 150 l/min [40 gpm], p max = 420 bar [6000 psi] leak-proof, two-stage hydraulic, SE-flange design 12--S... 1 Description Two-stage load-control

More information

80% Less installation time with just two welds for fast and efficient installation.

80% Less installation time with just two welds for fast and efficient installation. The smarter, faster route to Installation and service The ICF Valve Station - member of the Flexline family. The unique ICF Flexline valve station allows you to substitute your traditional valve train

More information

80% Less installation time with just two welds for fast and efficient installation.

80% Less installation time with just two welds for fast and efficient installation. The smarter, faster route to Installation and service The ICF Valve Station - member of the Flexline family. The unique ICF Flexline valve station allows you to substitute your traditional valve train

More information

Flow Control Valves. 1 Description. 2 Symbols. Series MTKA, MTQA, MTCA 2.1 MTKA MTQA flow control valve. 1.1 MTKA flow control valve

Flow Control Valves. 1 Description. 2 Symbols. Series MTKA, MTQA, MTCA 2.1 MTKA MTQA flow control valve. 1.1 MTKA flow control valve Flow Control Valves Series MTK, MTQ, MTC MTQ... MTC... robust, uncomplicated, reliable these valves do not require maintenance. This lowers costs and reduces the risk of a system failure. can be provided

More information

SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection

SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 07-8 mm - pad mounting body M connection x/ - / - / Series 0 ISO 07- (8 mm) FEATURES M connection on top of valve: reduces

More information

Auxiliary valve QDS6 Sequence valve, 3-way. Catalogue (GB) (US) October 1998

Auxiliary valve QDS6 Sequence valve, 3-way. Catalogue (GB) (US) October 1998 Auxiliary valve Sequence valve, 3-way Catalogue 9129 8542-02 (GB) 9129 8542-06 (US) October 1998 Sequence valve, 3-way Applications The sequence valve is designed to open or close a hydraulic pilot signal

More information

PTS1120TSJB PTS2120TSTSJB

PTS1120TSJB PTS2120TSTSJB Engineering & Manufacturing Solutions Specifications: 18 gpm (68.0 lpm) Nominal Capacity. Rated up to 3000 psi (207 bar). Port Sizes: -Inlet/Outlet #12 SAE. -Work Ports #10 SAE. 10 Micron Filtration Recommended.

More information

Directional Controls

Directional Controls Vickers Directional Controls Lever Operator Directional Control Valves DG17S-8-**-10 DG17S4-10 **-50 NF D08/D10, ISO-4401-08/10 Released 5/94 681 able of Contents General Information..................................................................................

More information

* Different spooltypes up to 120 l/min. in combination with simultaneously control.

* Different spooltypes up to 120 l/min. in combination with simultaneously control. APV-16 Features. * Modular assembly system, suitable for 'Build Program'. * Max. operating pressure 420 bar. * Different spooltypes up to 120 l/min. in combination with simultaneously control. * Compact

More information

Damcos PHP Portable hand pump unit 5 l. Product Data Sheet September 2014 SD E04

Damcos PHP Portable hand pump unit 5 l. Product Data Sheet September 2014 SD E04 Damcos PHP 25-05 Portable hand pump unit 5 l Product Data Sheet September 2014 SD 6601-2E04 TM Damcos PHP 25-05 September 2014 General description Double-acting portable hand pump incl. 5 l. reservoir

More information

Directional Controls

Directional Controls Vickers Directional Controls Directional Control Valves DG3V-3-*-60 Hydraulic Operated DG17V-3-*-60 Lever Operated DG18V-3-*-60 Air Operated DG20V-3-*-60 Cam Operated DG21V-3-*-60 Plunger Operated CETOP

More information

Electrically Operated Pressure-Relief Cartridge, Size 10

Electrically Operated Pressure-Relief Cartridge, Size 10 Electrically Operated Pressure-Relief Cartridge, Size 1 Q max = 14 l/min (37 gpm), p max = bar (5 psi) seated pilot stage, spool-type design, with remote contral port Z Series WUVPOC-2, WUVPLC-2 1 Description

More information

Cartridge Valves Technical Information. Pilot operated check valves. Quick reference

Cartridge Valves Technical Information. Pilot operated check valves. Quick reference Quick reference Pilot to Open Model No. Description Flow* Pressure Page P RPC 4 NCS4/ Pilot Operated Check Valve, Pilot to Open l/min [ US gal/min] RPC 6 NCS6/ 5 l/min [7 US gal/min] CP45- SDC- l/min RPC

More information

No October, Eaton. Gear Pumps. Parts Information. Series 26 Model Single Gear Pumps

No October, Eaton. Gear Pumps. Parts Information. Series 26 Model Single Gear Pumps Eaton Gear Pumps No. 6-634 October, 1995 Parts Information Series 26 Model 26000 Single Gear Pumps Pump Parts Drawing Righthand (CW) pump rotation shown. 14b 17 11 4D 1 25 9 4A 10 4B 14a 40 Plug 3 7 13

More information

Target Cleanliness Worksheet. Systemic Contamination Control

Target Cleanliness Worksheet. Systemic Contamination Control Target Cleanliness Worksheet Systemic Contamination Control Target Cleanliness Worksheet 1. SET A TARGET Eaton Recommended Cleanliness Code Chart PUMPS

More information

directional control valve series cv691

directional control valve series cv691 directional control valve series cv691 Contents Page 3 Page 4 Page 5 Page 6-7 Page 8 Page 9 Page 10 Page 11-12 General Information Technical Data Performance Curves Dimensions Relief Valve Advantages

More information

Load Controls Screw In Cartridge Valves Pressures to 350 bar (5000 psi) Flows to 190 l/min (50 USgpm)

Load Controls Screw In Cartridge Valves Pressures to 350 bar (5000 psi) Flows to 190 l/min (50 USgpm) Vickers Cartridge Valves Load Controls Screw In Cartridge Valves Pressures to 50 bar (5000 psi) Flows to 90 l/min (50 USgpm) Rev. 2/99 722 Contents MODEL DESCRIPTION TYP. APPLICATION PRESSURE bar (psi)

More information

DNS. Monoblock directional control valves DNS - Directional control valve

DNS. Monoblock directional control valves DNS - Directional control valve Monoblock directional control valves DNS - Directional control valve DNS efore use, carefully read the GENERL INSRUCIONS FOR USE OF DIRECIONL CONROL VLVES 398SMD6I - 6--8 DNS echnical data Nominal flow

More information

MDC Series. Marine Grade 4-Way Directional Control Valve With Or Without Flow Control MDCF16TH304H MDC16TH404HB

MDC Series. Marine Grade 4-Way Directional Control Valve With Or Without Flow Control MDCF16TH304H MDC16TH404HB Engineering & Manufacturing Solutions Specifications: MDC rated for -4 gpm (-151 lpm) MDCF rated for -3 gpm (-114 lpm) Rate for 3 PSI (27 bar) Port Sizes #16 SAE (1-5/16-12) all ports Weighs 16 lbs. (7.3

More information

LPK1230 Hydraulic Crimping Tool 12 ton

LPK1230 Hydraulic Crimping Tool 12 ton SPECIFICATIONS AND PARTS LPK1230 Hydraulic Crimping Tool 12 ton Serial Code FYB Read and understand all of the instructions and safety information in this manual before operating or servicing this tool.

More information

Inverse Prop. Pressure-Relief Cart., Size 2 4

Inverse Prop. Pressure-Relief Cart., Size 2 4 Inverse Prop. Pressure-Relief Cart., Size Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description inverse proportional pressure-relief valves are direct acting screw-in

More information

Pilot Operated Check Valves Catalog Quick Reference

Pilot Operated Check Valves Catalog Quick Reference Quick Reference Pilot to Open Model No. Description Flow* Pressure Page RPC NCS/3 Pilot Operated Check Valve, Pilot to Open.5 l/min [5. US gal/min] RPC NCS/3 35 l/min [9.3 US gal/min] CP5- SDC-3 3 l/min

More information

4/3 Directional valve elements L8_P5 with proportional (ED-IP) control and with or without LS connections L8_P5 (ED-IP)

4/3 Directional valve elements L8_P5 with proportional (ED-IP) control and with or without LS connections L8_P5 (ED-IP) 4/3 Directional valve elements L8_5 with proportional (ED-I) control and with or without LS connections L8_5 (ED-I) RE 1831-7 Edition: 2.21 Replaces: 7.12 7.212 Size Series Maximum operating pressure 31

More information

Check Valves. Pilot Operated Check Valves. Vickers. 4CG-10, 20 Series 4CS-03, 20 Series 4CT-06/10, 20 Series. Basic Characteristics.

Check Valves. Pilot Operated Check Valves. Vickers. 4CG-10, 20 Series 4CS-03, 20 Series 4CT-06/10, 20 Series. Basic Characteristics. Vickers heck Valves Operated heck Valves 4G-10, 20 Series, 20 Series 4T-06/10, 20 Series Typical Section 4T1-06-D*-20-U, illustrating external drain and decompression features asic haracteristics Maximum

More information

SystemStak Valves. ISO4401 Size 02

SystemStak Valves. ISO4401 Size 02 SystemStak Valves ISO441 Size 2 Reduce System Space Requirements SystemStak valves make compact hydraulic systems in which specific function valves are sandwich mounted between a directional valve and

More information

Hand lever valves VHER

Hand lever valves VHER Hand lever valves VHER Hand lever valves VHER Key features Powerful Flexible Practical -M- Flow 170 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised Connections:

More information

Applications. What moves your world

Applications. What moves your world Digital Control Proportional Valves Series D92 High-performance pressure control valve with high dynamics and the ability to easily and exactly tune the pressure controller gain The pq-proportional valves

More information

Proportional Pressure-Relief Cartridge Valve, Size 2...4

Proportional Pressure-Relief Cartridge Valve, Size 2...4 Proportional Pressure-Relief Cartridge Valve, Size... Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description proportional pressure-relief valves are direct acting

More information

Air preparation units

Air preparation units Overview Description Page Characteristics Dimensions Order instructions Type overview unit three-piece 44, 45, 48 52 6 unit two piece 44, 45, 48 52 6 Filter-regulator 44, 45, 48 53 6 Filter-water-separator

More information

Cover headline. Cover subheadline. Check Valves

Cover headline. Cover subheadline. Check Valves Check Valves Cover headline Direct and pilot operated check valve functions for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) Cover subheadline EATON Screw-In Cartridge Valves E-VLSC-MC-E December

More information

3-Way Pressure-Reducing Cartridge, Size 2 4

3-Way Pressure-Reducing Cartridge, Size 2 4 -Way Pressure-Reducing Cartridge, Size 2 Q max = 2 l/min, p max = 25 bar Spool-type design, direct acting, with manual adjustment 1 Description Compact construction for cavity type AM /- UNF to Bucher

More information

Inverse Proportional Pressure-Relief Cartridge, Size 10

Inverse Proportional Pressure-Relief Cartridge, Size 10 Inverse Proportional Pressure-Relief Cartridge, Size 1 Q max = 12 l/min, p max = 3 bar Seated pilot, spool-type main stage, damped design 1 Description inverse-proportional pressure-relief valves are size

More information

Monoblock directional control valves ML - Directional control valve

Monoblock directional control valves ML - Directional control valve Monoblock directional control valves ML - Directional control valve ML Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD4I - 6--8 ML echnical data Nominal flow

More information

Electro-Proportional Valves. Selection Guide HYDRA FORCE

Electro-Proportional Valves. Selection Guide HYDRA FORCE Continuous-duty rated solenoids. Hardened precision spool and cage for long life. Cartridges voltage interchangeable. Efficient wet-armature construction. Industry-common cavity. Designed for excellent

More information

KEG PUMP. Range of Electric Keg Pumps

KEG PUMP. Range of Electric Keg Pumps KP KEG PUMP Range of Electric Keg Pumps Electric Keg (Drum) Pumps for Grease KEG PUMP Versatile range of Interlube electric grease pumps for industrial and off-road applications The KP keg pump is available

More information

Flow and check valves Logic valves series 551. Brochure

Flow and check valves Logic valves series 551. Brochure Flow and check valves Logic valves series 551 Brochure 2 Flow and check valves Logic valves series 551 3/2-directional valve, low pressure operated Qn = 2-120 l/min 3 3/2-directional valve, Qn = 120 l/min

More information

Flow Controls. DG**-06 Series Stacking Valves. Vickers. ISO (D06) Interface Flows to 340 l/min (90 USgpm) Pressure to 210 bar (3000 psi)

Flow Controls. DG**-06 Series Stacking Valves. Vickers. ISO (D06) Interface Flows to 340 l/min (90 USgpm) Pressure to 210 bar (3000 psi) Vickers Flow Controls DG**-6 Series Stacking Valves ISO-441-8 (D6) Interface Flows to 34 l/min (9 USgpm) Pressure to 21 bar (3 psi) 5125./EN/598/A Introduction These stackable modules are designed for

More information

VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES 10

VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES 10 / ED VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES OPERATING PRINCIPLE The VPPL are variable displacement axial-piston pumps with variable swash plate, suitable for applications

More information

RE / Meter out pressure compensator Sandwich plate design Type SCA... /Series 2X. Description of function, Section 1/6. Replaces: 09.

RE / Meter out pressure compensator Sandwich plate design Type SCA... /Series 2X. Description of function, Section 1/6. Replaces: 09. Meter out pressure compensator Sandwich plate design Type SCA... /Series X Sizes 6, 5 up to 35 bar up to 35 L/min RE 9 47/.96 RE 9 47/.96 Replaces: 9.87 Sandwich plate design Load compensation in lines

More information

Prop. 3-Way Pressure-Reducing Cart., Size 5 / SAE 08

Prop. 3-Way Pressure-Reducing Cart., Size 5 / SAE 08 Prop. -Way Pressure-Reducing Cart., Size / SAE 8 Q max = 1 l/min (4 gpm), p max = bar (6 psi) Direct acting, electrically operated 1 Description proportional -way pressure-reducing cartridges are size

More information

BACK PRESSURE / SUSTAINING

BACK PRESSURE / SUSTAINING In many liquid piping systems, it is vital that line pressure is maintained within relatively narrow limits. This is the function of the 108 Pressure Relief / Back Pressure Series of the OCV control valves.

More information

2-port and 3-port valves PN 16

2-port and 3-port valves PN 16 OEM 2-port valves VVP459.10-0.63 to VVP459.25-6.3 3-port valves VXP459.10-0.63 to VXP459.25-6.3 3-port valves with bypass VMP459.10-0.63 to VMP459.20-4 2-port valves VVP459.25-6.3 to VVP459.40-25 3-port

More information

Directional Control Valve L90LS Proportional, Load-Sensing and Pressure Compensated. Catalogue HY /UK July, 2005

Directional Control Valve L90LS Proportional, Load-Sensing and Pressure Compensated. Catalogue HY /UK July, 2005 Directional Control Valve Proportional, Load-Sensing and Pressure Compensated July, 2005 Catalogue Information Catalogue layout In addition to general information and basic technical data, this catalogue

More information

Pressure Sensing Valve - Model 4023

Pressure Sensing Valve - Model 4023 Pressure Sensing Valve - Model 4023 Overview AMOT Model 4023 can be used as a 2 or 3-way capacity, pressure sensing valve. This valve is ideal for applications that require compressor suction and discharge

More information

Leak free Pipe Rupture Valve for Excavators

Leak free Pipe Rupture Valve for Excavators Leak free Pipe Rupture Valve for xcavators Series motion and progress Reference: 3 P 9575 1/11.6 Classification: 43.325.355...325.35 1/17 Contents Page 1 General description................................................................

More information

Directional Control Valve P70

Directional Control Valve P70 Directional Control Valve Open or Closed Centre Proportional Valve Series Catalogue HY17-8546/UK January, 2007 Catalogue Information Catalogue layout This catalogue is designed to give an overview of the

More information

L6090 (LC04M-CBL) - L6095 (LC04M-CBD)

L6090 (LC04M-CBL) - L6095 (LC04M-CBD) or 3 way pressure compensated flow regulators L69 (LC4M-CBL) - L695 (LC4M-CBD) RE 1833-4 Edition:.16 Replaces: 7.1 Size 4 Series Maximum operating pressure 31 bar (45 psi) Maximum flow (-way) 1 l/min (3.

More information

BACK PRESSURE / SUSTAINING

BACK PRESSURE / SUSTAINING SPECIFICATIONS DIMENSIONS In many liquid piping systems, it is vital that line pressure is maintained within relatively narrow limits. This is the function of the 108 Pressure Relief / Back Pressure Series

More information

Inverse Proportional Pressure-Relief Cart., Size 2 4

Inverse Proportional Pressure-Relief Cart., Size 2 4 Inverse Proportional Pressure-Relief Cart., Size Q max = l/min, p max = 35 bar Direct acting, electrically operated Description Compact construction for cavity type AL 3/-6 UNF Operated by a proportional

More information

Priority (Swing) Motors Data and Specifications

Priority (Swing) Motors Data and Specifications s Data and Specifications Specifications HMF 55 HMF 75 HMF 105 cm 3/rev in 3/rev 55 3.36 75 4.57 105 6.40 Pressure Ratings Nominal 5000 PSIG Maximum 6090 PSIG Peak 7250 PSIG Operating Speed Maximum 4100

More information

Proportional Pressure-Relief Cartridge Valve, Size 2...4

Proportional Pressure-Relief Cartridge Valve, Size 2...4 Proportional Pressure-Relief Cartridge Valve, Size... Q max = l/min, p max = 3 bar Direct acting, electrically operated 1 Description proportional pressure-relief valves are direct acting screw-in cartridges

More information

SPOOL VALVES. ISO 15407/1 - Sizes Series PA568-GB-R3. All leafl ets available at:

SPOOL VALVES. ISO 15407/1 - Sizes Series PA568-GB-R3. All leafl ets available at: SPOOL VLVS ISO 07/ - Sizes 0-0 Series 8-9 P68-GB-R ll leafl ets available at: www.ascojoucomatic.com FTURS These spool valves which comply with the VDM 6 standard offer the advantage of being smaller than

More information

Orbital Motors Type OMP, OMR and OMH. Technical Information

Orbital Motors Type OMP, OMR and OMH. Technical Information Orbital Motors Type OMP, OMR and OMH Technical Information OMP, OMR and OMH Contents Revision View Date Page Changed Revision Mar 26 Small updates B Jun 27 all Major revision with new lit-number (minus

More information

4/3 Directional valve elements L85L1...(EDC-LV) with manual lever operated control with flow sharing control (LUDV concept) L85L1...

4/3 Directional valve elements L85L1...(EDC-LV) with manual lever operated control with flow sharing control (LUDV concept) L85L1... 4/3 Directional valve elements L8L1...(EDC-LV) with manual lever operated control with flow sharing control (LUDV concept) L8L1...(EDC-LV) RE 1831-17 Edition: 2.216 Replaces: 7.12 Size 6 Series Maximum

More information

The OCV Series 8000 float control valves are designed to maintain a SERIES FEATURES

The OCV Series 8000 float control valves are designed to maintain a SERIES FEATURES The OCV Series 8000 float control valves are designed to maintain a desired level in a tank or reservoir by opening for filling the tank when fluid is below the high level point and closing tightly when

More information

Chapter 10: Bidirectional Flow Controls

Chapter 10: Bidirectional Flow Controls Chapter 10: Bidirectional Flow Controls Objectives Learn about the patented, bidirectional flow control valves. Understand how the flow force affects the performance of the ZL70-36. Learn why there is

More information

180 Series Rotary Shear Directional Control Valve

180 Series Rotary Shear Directional Control Valve 180 Series Rotary Shear Directional Control Valve Up to l 38 lpm, 10 US gpm l 700 bar, 10,000 psi Milwaukee, WI 53235, US el: +1 (414) 769-6400 sales-us@webtec.com St. Ives, Cambs. E27 3LZ, UK el: +44

More information

BW0500AO. ByWire Elements BW0500AO Element 4/3 with side ports IBW0500 Interface

BW0500AO. ByWire Elements BW0500AO Element 4/3 with side ports IBW0500 Interface ywire Elements Element 4/3 with side ports IW5 Interface efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES 398SW5EN - 5--8 Technical data Nominal flow 5 l/min 3. US

More information

V83 series Redundant valve manifold systems - Modular with bypass 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability

V83 series Redundant valve manifold systems - Modular with bypass 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability V8 series Redundant valve manifold systems - Modular with bypass oo Safety, oo Availability and oo Safety and Availability > > Modular design - Maxseal valves > > able terminations inside coil housing

More information

Rate of Flow Valve Series 120

Rate of Flow Valve Series 120 SPECIFICATIONS Rate of Flow Valve Series DIMENSIONS The OCV Series 120 Rate of Flow control valve is designed to control or limit flow to a predetermined rate, regardless offl uctuations in downstream

More information

Evaporator pressure regulator Type KVP

Evaporator pressure regulator Type KVP Data sheet Evaporator pressure regulator KVP The KVP is mounted in the suction line after the evaporator and is used to:. Maintain a constant evaporating pressure and thereby a constant surface temperature

More information

cooled, Heated ATH 2800 MT, DN 250 ISO-F, External drive electronics, Water cooled, Heated

cooled, Heated ATH 2800 MT, DN 250 ISO-F, External drive electronics, Water cooled, Heated ATH 2800 MT, DN 250 ISO-F, External drive electronics, Water cooled, Heated ATH 2800 MT, DN 250 ISO-F, External drive electronics, Water cooled, Heated ATH 2800 MT, DN 250 ISO-F, External drive electronics,

More information

Double Pilot Operated Cartridge Check Valve, Size 8

Double Pilot Operated Cartridge Check Valve, Size 8 Double Pilot Operated Cartridge Check Valve, Size 8 Q max = 7 l/min (19 gpm), p max = 35 bar (5 psi) pilot operated, two-stage, spring-closed cartridge-type poppet valve Compact design for cavity type

More information

Displacement 12, , Maximum flow rate (at 1450 rpm) bar.

Displacement 12, , Maximum flow rate (at 1450 rpm) bar. 00/07 ED PVD VARIABLE DISPLACEMENT VANE PUMPS SERIES 0 OPERATING PRINCIPLE The PVD pumps are variable displacement vane pumps with a mechanical type of pressure compensator. They allow instantaneous adjustment

More information

Fixed Displacement Plug-In Motor A2FE

Fixed Displacement Plug-In Motor A2FE www.phphyds.com Series 6, axial tapered piston, bent axis design for mounting in mechanical gearboxes Sizes 28...355 Nom. Pressure up to 400 bar Peak Pressure up to 450 bar he fixed displacement plug-in

More information

Proportional Throttle Cartridges, Size 16

Proportional Throttle Cartridges, Size 16 Proportional Throttle Cartridges, Size 16 Q max = 5 l/min, p max = 5 bar, Q N max = 14 l/min at p 1 bar Two-Stage, with Seat-Valve Shut-Off 1 Description Normally closed Seat-valve shut-off from 1 Compact

More information

Basic Hydraulics. Module 4: Flow Control Valves & Pressure Relief Valves. Academic Services PREPARED BY. January 2012

Basic Hydraulics. Module 4: Flow Control Valves & Pressure Relief Valves. Academic Services PREPARED BY. January 2012 Basic Hydraulics Module 4: Flow Control Valves & Pressure Relief Valves PREPARED BY Academic Services January 2012 Applied Technology High Schools, 2011 ATM 1122 Basic Hydraulics Module 4: Flow control

More information

Valves to ISO 5599/1 standards pilot and solenoid actuated size

Valves to ISO 5599/1 standards pilot and solenoid actuated size Series UDS ISO pilot and solenoid actuated size 1 - - 3 DESCRIPTION Valves series "UDS ISO" are produced in the and pneumatic functions according to the interface to ISO 5599/1 standards and they are mounted

More information

2-port seat valves PN25 with externally threaded connections

2-port seat valves PN25 with externally threaded connections 4 379 2-port seat valves PN25 with externally threaded connections VVG55.. Valve body bronze CC491K (Rg5) DN 15...25 (½...1 ") kvs 0.25...6.3 m3/h Stroke 5.5 mm Sets of ALG.. with threaded and ALS.. with

More information

2 - way valve for steam, pressure relieved (PN 25) VGS - external thread

2 - way valve for steam, pressure relieved (PN 25) VGS - external thread Data sheet 2 - way valve for steam, pressure relieved (PN 25) VGS - external thread Description VGS is pressure relieved 2-way normally open (NO) valves for steam, designed to be combined with: - AVT Temperature

More information

Pressure control. Direct and pilot operated pressure control valves for applications up to 350 bar (5000 psi) and 300 L/min (80 USgpm)

Pressure control. Direct and pilot operated pressure control valves for applications up to 350 bar (5000 psi) and 300 L/min (80 USgpm) Hydraulic Screw-in Cartridge Valves (SiCV) Pressure control Direct and pilot operated pressure control valves for applications up to 5 bar (5 psi) and L/min (8 USgpm) Pressure control PRSSUR CONTROLS...-4

More information

SPG. Application example. Pneumatic 2-Finger Parallel Gripper Heavy-load Gripper. Weight 35 kg. Stroke per finger 100 mm.

SPG.  Application example. Pneumatic 2-Finger Parallel Gripper Heavy-load Gripper. Weight 35 kg. Stroke per finger 100 mm. SPG Size 100 Weight 35 kg 10,000 N Stroke per finger 100 mm Workpiece weight 50 kg Application example Gripper unit for heavy V8 engine blocks. SPG 100 2-Finger Heavy-load Gripper 446 www.schunk.com SPG

More information

PFH. Application example. Pneumatic 2-Finger Parallel Grippers Long-stroke Grippers. Sizes Gripping force 510 N N

PFH. Application example. Pneumatic 2-Finger Parallel Grippers Long-stroke Grippers. Sizes Gripping force 510 N N PFH Sizes 30.. 50 Weight 2.65 kg.. 9.7 kg Gripping force 510 N.. 2650 N Stroke per finger 30 mm.. 50 mm Workpiece weight 2.55 kg.. 11.5 kg Application example Assembly unit for intermediate sleeves in

More information

Pressure-Relief Cartridge Valve, Size 4

Pressure-Relief Cartridge Valve, Size 4 Pressure-Relief Cartridge Valve, Size 4 Q max = 30 l/min, p max = 420 bar Seated design, direct acting, with mechanical operation Compact construction for cavity type AL 3/4-16 UNF High flow rates 7 pressure

More information

3 & 4-Way Mixing & Diverting Valves

3 & 4-Way Mixing & Diverting Valves Applications: 3-Way Valve The ESBE VRG series of 3 & 4-way valves are designed to mix water to the appropriate temperature to meet the zone or system requirements within heating and cooling systems. The

More information

Inverse Proportional Pressure-Relief Cart., Size 2 4

Inverse Proportional Pressure-Relief Cart., Size 2 4 Inverse Proportional Pressure-Relief Cart., Size Q max = l/min, p max = 5 bar Direct acting, electrically operated 1 Description inverse proportional pressure-relief valves are direct acting screw-in cartridges

More information