Exhaust air flow control valves
|
|
|
- Erin Nichols
- 5 years ago
- Views:
Transcription
1 Exhaust air flow control valves
2 Exhaust air flow control valves Product range overview Function Exhaust air flow control valves are screwed into the exhaust controls of control valves or drives. They enable the piston speed of cylinders or rotary drives to be controlled by restricting the air exhaust. This is done using the adjusting element. The air is exhausted via an integrated silencer which reduces the noise level. Design Valve function Design Type Pneumatic connection 1 qn 1) Adjusting element Page/ Internet [l/min] Exhaust air flow control valve Sintered metal Flow control/ silencer function GRE GÁ, G¼, Gy, G½ 0 3,600 Slotted head screw 3 Flow control/ silencer Plastic Flow control/ silencer function VFFK M5, M7, Rx, R¼ Knurled screw 5 GRU GÁ, G¼, Gy, G½, G¾ 0 8,000 Slotted head screw 8 1) Standard flow rate 2 Internet: Subject to change 2018/05
3 Exhaust air flow control valves GRE Function -M- Flow rate 0 3,600 l/min -Q- Temperature range C -L- Operating pressure 0 10 bar General technical data Valve function Flow control/silencer function Pneumatic connection 1 Gx G¼ Gy G½ Adjustment component Slotted head screw Type of mounting Screw-in Mounting position Any Nominal tightening torque [Nm] 12 ±20 Max. tightening torque [Nm] 15 Operating and environmental conditions Pneumatic connection 1 Gx G¼ Gy G½ Operating pressure [bar] 0 10 Operating medium Compressed air in accordance with ISO :2010 [7: : ] Note on operating/pilot medium Ambient temperature [ C] Temperature of medium [ C] Compressed air in accordance with ISO :2010 [7: : ] Compressed air in accordance with ISO :2010 [7:4:4] Operation with lubricated medium possible (in which case lubricated operation will always be required) Compressed air in accordance with ISO :2010 [7: : ] Standard flow rate qn at 6 bar > 0 bar as a function of spindle rotations n qn [l/min] n 2018/05 Subject to change Internet: 3
4 Exhaust air flow control valves GRE Materials Sectional view Exhaust air flow control valve 1 1 Adjusting screw Brass 2 Threaded plug Wrought aluminium alloy Seals NBR Note on materials RoHS-compliant 2 Dimensions Download CAD data Type Connection D1 L L1 ß D GRE-x Gx GRE-¼ G¼ GRE-y Gy GRE-½ G½ Ordering data Pneumatic connection 1 Standard nominal flow rate qnn at 6 bar > 5 bar in direction of flow control Standard flow rate qn at 6 bar > 0 bar in direction of flow control Weight Part No. Type [l/min] [l/min] [g] Gx GRE-x G¼ GRE-¼ Gy 2, , GRE-y G½ 3, , GRE-½ 4 Internet: Subject to change 2018/05
5 Flow control/silencers VFFK Type codes VFFK C K M7 P Type VFFK Flow control/silencer Design C Inline Adjusting element K Knurled screw Pneumatic connection 1 M5 M7 R18 R14 Thread M5 Thread M7 Thread Rx Thread R¼ Additional feature P Polymer silencer 2018/05 Subject to change Internet: 5
6 Flow control/silencers VFFK Function -M- Flow rate l/min -Q- Temperature range C -L- Operating pressure 0 10 bar General technical data Valve function Flow control/silencer function Pneumatic connection 1 M5 M7 Rx R¼ Adjusting element Knurled screw Type of mounting Screw-in Mounting position Any Type of seal on threaded plug Sealing ring Coating Nominal tightening torque [Nm] 1.4 ±20% 3.8 ±20% Operating and environmental conditions Operating pressure complete [bar] 0 10 temperature range Operating medium Compressed air according to ISO :2010 [7:4:4] Note about the operating/pilot medium Lubricated operation possible Ambient temperature [ C] Temperature of medium [ C] Storage temperature [ C] Materials Type VFFK-C-K-M -P VFFK-C-K-R -P Silencer insert PE Threaded plug Nickel-plated brass Regulating screw Nickel-plated brass Knurled nut Aluminium Seals NBR Note on materials RoHS-compliant Standard flow rate qn [l/min] as a function of turns of the adjusting screw n VFFK-C-K-M5-P VFFK-C-K-M7-P max max P1 = 1 bar P1 = 3 bar P1 = 5 bar P1 = 7 bar P1 = 9 bar Flow rate tolerance: ±20% 6 Internet: Subject to change 2018/05
7 Flow control/silencers VFFK Standard flow rate qn [l/min] as a function of turns of the adjusting screw n VFFK-C-K-R18-P VFFK-C-K-R14-P max max P1 = 1 bar P1 = 3 bar P1 = 5 bar P1 = 7 bar P1 = 9 bar Flow rate tolerance: ±20% Dimensions VFFK-C-K-M -P VFFK-C-K-R -P Download CAD data Type Connection D2 L1 L2 L3 ß 1 D1 min. max. min. max. VFFK-C-K-M5-P M5x VFFK-C-K-M7-P M7x VFFK-C-K-R18-P Rx VFFK-C-K-R14-P R¼ Ordering data Pneumatic connection 1 Standard flow rate qn at 6 bar } 0 bar Weight Part No. Type [l/min] [g] M VFFK-C-K-M5-P M VFFK-C-K-M7-P Rx VFFK-C-K-R18-P R¼ VFFK-C-K-R14-P 2018/05 Subject to change Internet: 7
8 Flow control/silencers GRU Type codes GRU ¼ B Type GRU Flow control/silencer Pneumatic connection 1 x ¼ Å ½ ¾ Thread Gx Thread G¼ Thread GÅ Thread G½ Thread G¾ Generation B B series 8 Internet: Subject to change 2018/05
9 Flow control/silencers GRU Function -M- Flow rate 0 8,000 l/min -Q- Temperature range C -L- Operating pressure 0 10 bar General technical data Valve function Flow control/silencer function Pneumatic connection 1 Gx G¼ Gy G½ G¾ Adjustment component Type of mounting Mounting position Slotted head screw Screw-in Any Operating and environmental conditions Operating pressure [bar] 0 10 complete temperature range Operating medium Compressed air in accordance with ISO :2010 [7: : ] Note on operating/pilot medium Operation with lubricated medium possible Ambient temperature [ C] Temperature of medium [ C] Standard flow rate qn at 6 bar > 0 bar as a function of spindle rotations n qn [l/min] n Materials Sectional view Flow control/silencer Housing, threaded plug Aluminium 2 Adjusting screw PA 3 Silencer insert PE Note on materials RoHS-compliant 2018/05 Subject to change Internet: 9
10 Flow control/silencers GRU Dimensions Download CAD data 1 Adjusting screw Type Connection D1 L L1 ß D GRU-x Gx GRU-¼ G¼ GRU-y Gy GRU-½ G½ GRU-¾ G¾ Ordering data Pneumatic connection 1 Standard flow rate qn at 6 bar > 0 bar in direction of flow control Weight Part No. Type [l/min] [g] Gx 0 1, GRU-x-B G¼ 0 1, GRU-¼-B Gy 0 1, GRU-y-B G½ 0 4, GRU-½-B G¾ 0 8, GRU-¾-B 10 Internet: Subject to change 2018/05
11 Festo North America 1 Festo Canada 2 Montréal 3 Québec City Headquarters Festo Inc Explorer Drive ississauga, O L W , Trans-Canada Pointe-Claire, QC , rue Watt 11 Québec, QC Festo United States 5 Appleton 7 etroit Headquarters Festo Corporation 395 Moreland Road orth 9 Tower iew Drive, Suite Greenville, WI 5 9 auppauge, 11 6 Chicago 8 5 W Algonquin - Suite 3 0 Arlington eights, IL West Long Lake Road Troy, MI 09 Silicon Valley 935 Southfront Road, Suite F Livermore, CA Festo Regional Contact Center Canadian Customers Commercial Support: Tel: 1 O FESTO Fax: 1 F FESTO festo canada ca festo com USA Customers Commercial Support: Tel: FESTO Fax: FESTO customer service us festo com Technical Support: Tel:1 O FESTO Fax:1 F FESTO technical support ca festo com Technical Support: Tel:1 O FESTO Fax: FESTO product support us festo com C Sub ect to change Internet:
Hand slide valves W/VBOH
Hand slide valves W/VBOH Hand slide valves W/VBOH Product range overview Version Valve function Version Type Pneumatic connection 1 Pneumatic connection 2 qnn Page/ Internet [l/min] Hand slide valves 3/2-way,
Bernoulli grippers OGGB
Key features General Purpose Benefits Applications The Bernoulli gripper OGGB is ideally suited to transporting thin, extremely delicate and brittle workpieces. Minimised workpiece contact, gentle workpiece
Precision one-way flow control valves GRP
Product range overview and type codes Product range overview Version Valve function Version Type Connection direction Precision one-way flow control valve Metal One-way flow control function Pneumatic
Push-in fittings QB, NPT
General technical data Connecting thread UNF10-32 NPT1/8-27 NPT1/4-18 NPT3/8-18 NPT1/2-14 Size Standard Design Push-pull principle Mounting position An Tpe of seal on threaded plug Sealing ring Coating
Parallel grippers HGPM, micro
Key features G6: G8: G9: with stroke compensation with clamping spigot with flange mounting At a glance Compact, handy design With open or closed gripper jaws Versatility thanks to externally adaptable
Push-in fittings CQ, for push-fit piping systems
Key features General information Suitable for polyamide pipes PQ-PA and aluminium pipes PQ-AL O.D. 12, 15, 18, 22 and 28 mm Internet: pq Suitable for polyamide tubing PAN and polyurethane tubing PUN O.D.
Angle grippers HGWM, micro
Key features G6: G7: G8: with stroke compensation with male thread with clamping spigot At a glance Compact, handy design With open or closed gripper jaws Versatility thanks to externally adaptable gripper
Pressure gauges Product range overview
Pressure gauges Pressure gauges Product range overview Type Pneumatic connection Nominal size Display unit Red/ Outer scale Inner scale green bar MPa psi bar MPa psi range Page/ Internet Pressure gauge
Push-in fittings CRQS, stainless steel
Features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard and
Adaptive gripper fingers DHAS
Features At a glance Adaptive gripper fingers for smooth and flexible gripping, with the Fin Ray Effect derived from the movement of a fish s tail fin. Two flexible bands, which meet at the top like a
Hand slide valves W/VBOH
Hand slide valves W/VBOH Hand slide valves W/VBOH Product range overview Version Valve function Version Type Pneumatic connection 1 Pneumatic connection 2 qnn Page/ Internet [l/min] Hand slide valves 3/2-way,
Precision pressure regulators LRP/LRPS
Precision pressure regulators LRP/LRPS q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement
Hand lever valves VHER
Hand lever valves VHER Hand lever valves VHER Key features Powerful Flexible Practical -M- Flow 170 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised Connections:
Solenoid valves CDSV, Clean Design
Key features Innovative Versatile Reliable Proven valve technology combined with a highly resistant polymer material. valve position 2 solenoid coils Flow rate 300 650 l/min Valve width 24 mm Connected
Parallel grippers HGPT-B, heavy-duty
Key features Advantages compared with the parallel gripper HGPT Space-optimised: Choice of shorter housing without gripping force retention or longer housing with gripping force retention Increased gripping
Push-in fittings NPQH
Key features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard
Push-in fittings NPQH
Key features Application Effortless selection of the right fitting. Quick Star offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard
Pressure boosters DPA
Key features Function The pressure booster is a twin-piston pressure intensifier intended solely for compressing air. When the DPA is pressurised with compressed air, integrated non-return valves automatically
Valves, manually operated
Valves, manually operated Valves, manually operated Key features VHEM-P K/O-3-PK-3 H-3-¼-B KH/O-3-PK3 TH/O-3-PK3 F-3-¼-B Innovative Versatile Reliable Easy to mount Small and compact for a wide range of
Valves, manually operated
Valves, manually operated Valves, manually operated Key features VHEM-P K/O-3-PK-3 H-3-¼-B KH/O-3-PK3 TH/O-3-PK3 VHEM-L F-3-¼-B Innovative Versatile Reliable Easy to mount Small and compact for a wide
Proportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
Push-in fittings CRQS, stainless steel
Features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard and
Fluidic Muscle DMSP/MAS
Fluidic Muscle DMSP/MAS Fluidic Muscle DMSP/MAS Key features Mode of operation Fluidic Muscle is a tensile actuator which mimics the natural movement of a muscle. It consists of contractible tubing and
Solenoid valves VZWF, force pilot operated
Key features and overview Function Normally closed solenoid valve with diaphragm and forced lifting. When the solenoid is energised, the differential pressure from the secondary side of the diaphragm is
Push-in fittings QB, NPT
General technical data Connecting thread UNF NPT Size Standard Design Push-pull principle Mounting position An Tpe of seal on threaded plug Sealing ring Coating Operating and environmental conditions Operating
Bellows actuator EB Key features
Bellows actuator B Bellows actuator B Key features Key features Suitable for use in harsh, dusty ambient conditions Can be used under water Sturdy design Large forces range from 1 50 KN Low installation
Heavy-duty three-point grippers HGDT
Key features At a glance The force generated by the linear motion is translated into the gripper jaw movement via a force-guided triple wedge mechanism. This also guarantees synchronous movement of the
Solenoid Valves VUVG Overview
Solenoid Valves VUVG Overview Universal valve Combination of basic valve and E-boxes Width 10 mm and 14 mm In-line valves VUVG-L and VUVG-S Sub-base valves VUVG-B Internal or external pilot air supply
Parallel grippers HGPM, micro
Key features G6: G8: G9: stroke compensation clamping spigot flange mounting At a glance Compact, handy design With open or closed gripper jaws Versatility thanks to externally adaptable gripper fingers
4/2 way Pneumatic Solenoid Valve
4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11
SPCH/ Blowing block
> > for linear stretch blow moulding machines > > Compact and safe design > > Best suited for PET bottles up to litres, depending on cycle time Technical features Medium: Compressed air (purity class 3..3
Proportional pressure regulators VPPM
Key features LED indicators Control elements Display Plug socket with cable Venting at both ends Manifold block Sub-base valve Assembly repositionable by 180 In-line valve H-rail mounting Compressed air
Flow control valves Series RFU - RFO 2/
CATALOGUE > Release 8.5 > Valves Series RFU - RFO Flow control valves Series RFU - RFO Unidirectional and bidirectional flow control valves Ports: M5, G1/8, G1/4, G3/8 and G1/ Nominal diameter: M5 = 1,5
Cost effective. Smooth. Reliable. LOG Internal Hole Gripper
LOG Cost effective. Smooth. Reliable. LOG Internal Hole Gripper Light gripper made of very resistant polyamide with closed diaphragm system Field of Application Particularly suited to highly dynamic applications
Micro grippers HGPM/HGWM
HGPM/HGWM Miniaturised and optimised for assembly tasks Versatile 2004/10 Subject to change Products 2004/2005 1 / 1 HGPM/HGWM Key features HGWM HGPM 1 2 3 4 1 2 3 4 System product for handling and assembly
Air-service devices, Series MU1
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Air-service devices, Series MU1 Technical data Pressure regulator valve, MU1, G 1 Technical Data Type Operating
SOLENOID VALVES AND PNEUMATIC VALVES
9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, 2 and 3 The Series 9 electropneumatically or pneumatically operated
Piloted Non-Return Valves
ed Non-Return Valves ed non-return valves are designed to protect installations: if the compressed air supply is removed, they lock the air supply to the cylinder, thus maintaining it in position. Product
Pressure booster combination DPA-CRVZS. Operating instructions a [ ]
![Pressure booster combination DPA-CRVZS. Operating instructions a [ ]](/thumbs/88/116599651.jpg "Pressure booster combination DPA-CRVZS. Operating instructions a [ ]")
Pressure booster combination en Operating instructions 8074546 2017-07a [8074548] Original instructions -EN Identification of hazards and instructions on how to prevent them: Danger Immediate dangers which
Coding of banjo flow controllers. Actuation M = Manual S = Screwdriver
Flow control valves Unidirectional and bidirectional (meter-in, meter-out, orifice) banjo flow controllers Series SCU, MCU, SVU, MVU, SCO, MCO Ports M5, 1/8, 1/4, 3/8, 1/2 BSPP (without adapters) General
Directional valves Pneumatically operated Series CD07. Brochure
Series CD07 Brochure 2 Bosch Rexroth AG Pneumatics Series CD07 2/2-way valve, Series CD07 Qn = 1400 l/min pipe connection compressed air connection output: M14x1,5 suitable for ATEX 3 3/2-way valve, Series
Parker Legris Machine Safety: Product Sheets
Parker Legris Machine Safety: s Blocking Fittings Blocking fittings include a pneumatic monostable 2/2 normally closed (N) function. These fittings are directly installed onto the pneumatic cylinder supply
Fluidic Muscle DMSP Key features
Key features Mode of operation Fluidic Muscle is a tensile actuator which mimics the natural movement of a muscle. It consists of contractible tubing and appropriate connectors. The contractible tubing
Pressure regulators Pressure relief valves Safety valves. Brochure
Pressure regulators Pressure relief valves Safety valves Brochure 2 Pressure regulators Pressure relief valves Safety valves Qn = 676-33505 l/min thread-in 3 Safety valve, Series RV2 Qn = 1833-13874 l/min
Pressure regulators Manually operated Fine setting valves. Brochure
Pressure regulators Manually operated s Brochure Pressure regulators Manually operated s Qn = 9 l/min Actuating element: Push button Internal thread Poppet valve Qn = 9 l/min Actuating element: Push button
3/2-way valve, Series CD07 Qn= 1400 l/min pipe connection compressed air connection output: G 1/4 - M14x1,5 suitable for ATEX
/-way valve, Series CD07 Version Spool valve, zero overlap Sealing principle soft sealing Working pressure min./max. -0.95 bar / 0 bar Ambient temperature min./max. -5 C / +80 C Medium temperature min./max.
PN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12
PN LINE PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN
High flow rate. Cost effective. Compliant. Gripper with GSW-B Shaft Interface and Compensation Unit
GSW-B-AGE High flow rate. Cost effective. Compliant. Gripper with GSW-B Shaft Interface and Compensation Unit PGN-plus / PZN-plus universal gripper with shaft interface GSW-B and AGE compensation unit
-H- Note. Flow control valve. Key features
Flow cotrol valves Flow cotrol valves Key features Fuctio Flow cotrol or oe-way flow cotrol valves regulate the pisto speed of peumatic drives durig advace ad retur strokes. This is doe through suitable
Electrically Operated Pressure-Relief Cartridge, Size 10
Electrically Operated Pressure-Relief Cartridge, Size 1 Q max = 14 l/min (37 gpm), p max = bar (5 psi) seated pilot stage, spool-type design, with remote contral port Z Series WUVPOC-2, WUVPLC-2 1 Description
(1) Type (2) Thread size (T) (3) Wrench size specification : inch spec. (NPT, UNF) : mm spec. (M, R)
This exhaust needle valve, which comes with silencer, controls the exhaust flow rate. The valve can be attached directly to a solenoid valve where a cylinder or like mechanism has no sufficient space around
Air preparation units
Overview Description Page Characteristics Dimensions Order instructions Type overview unit three-piece 44, 45, 48 52 6 unit two piece 44, 45, 48 52 6 Filter-regulator 44, 45, 48 53 6 Filter-water-separator
Pneumatic valve islands
Pneumatic valve islands The MEGA solenoid air operated spool valve JOUCOMATIC offers a concept of solenoid air operated spool valves which can be fitted together to form islands. Due to its new patented
Filter pressure regulator, Series AS3-FRE G 3/8 - G 1/2 filter porosity: 5 µm lockable for padlocks with pressure gauge suitable for ATEX
Filter regulator, Series AS3-FRE G 3/8 - G 1/2 filter porosity: 5 µm lockable for padlocks with gauge suitable for ATEX 1 00119372 Version Parts Mounting orientation Working min./max. Medium Medium temperature
Pressure relief valve DHV 716 set range: 0,5-10,0 bar
Pressure relief valve DHV 7 set range: 0,5-0,0 bar Advantage pressure setting possible at any time, also during operation optimum monitoring valves high reproducibility of the set pressure high level of
Complementary valves: shuttle, quick exhaust and check valves
Complementary valves shuttle, quick exhaust and check valves Complementary valves are very important components of the pneumatic circuits. This group includes the: SHUTTLE VALVES: these valves are used
Description Total stroke Maximum Recommended Page in mm gripping force in N workpiece weight in kg
Overview parallel gripper Description Total stroke Maximum Recommended Page in mm gripping force in N workpiece weight in kg Version 1 2 1 2 1 2 RRP-A 64 12 6 240 450 1,2 2,2 26 80 16 8 380 700 1.9 3.5
VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES 10
/ ED VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES OPERATING PRINCIPLE The VPPL are variable displacement axial-piston pumps with variable swash plate, suitable for applications
ARI-DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP
ARI-DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 ARI-DP32 / DP33 Pneumatic actuator Page 2 DP-Actuator Extended stem on air failure ARI-DP34 Pneumatic actuator Page 2 ARI-DP34T Pneumatic actuator Page 6
Mounting and Operating Instructions EB EN. Type Supply Pressure Regulator. with increased air capacity
Type 4708-45 Supply Pressure Regulator with increased air capacity Translation of original instructions Mounting and Operating Instructions EB 8546-1 EN Edition March 2016 Note on these mounting and operating
Power Valve: Precision Regulator. High precision, large capacity relief regulator
Power Valve: Precision Regulator Series VEX High precision, large capacity relief regulator port large exhaust capacity pressure reducing valve which utilizes a nozzle flapper mechanism available as air
Compact pressure switches for gas and air
Compact pressure es for gas and air / 5.0 Printed in Germany Edition 0.8 Nr. 9 544 6 Technical description The pressure is an adjustable compact pressure according to EN 854 for combustion plants. The
3-Way Pressure-Reducing Cartridge, Size 2 4
-Way Pressure-Reducing Cartridge, Size 2 Q max = 2 l/min, p max = 25 bar Spool-type design, direct acting, with manual adjustment 1 Description Compact construction for cavity type AM /- UNF to Bucher
Microregulator 039 1/8-1/4
09/11/15 TECH DATA SHEET 675 Microregulator 1/8-1/4 Sensitive high performance model, high stability with low load losses and big flow rate. Downstream overpressures quickly eliminated. Can be wall mounted
Pressure Reducing Valve DMV 750 set range: bar
Pressure Reducing Valve DMV 750 set range:.0-6.0 bar Advantage pressure setting possible at any time, also during operation hermetically sealed by valve diaphragm high level of operating safety and long
Series AS-FPQ/AS-FPG. Speed Controller with One-touch Fitting for Clean Room. Speed controllers for clean room use
CAT.ES20-19 A Speed Controller with One-touch Fitting for Clean Room Series AS-FPQ/AS-FPG Series AS-FPG Series AS-FPQ Speed controllers for clean room use AS-FPQ: Brass (electroless nickel plated) and
Proportional Pressure-Relief Cartridge Valve, Size 2...4
Proportional Pressure-Relief Cartridge Valve, Size... Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description proportional pressure-relief valves are direct acting
Inverse Prop. Pressure-Relief Cart., Size 2 4
Inverse Prop. Pressure-Relief Cart., Size Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description inverse proportional pressure-relief valves are direct acting screw-in
GX-S. 2-jaw self centering radial pneumatic gripper (series GX-S) GX-S
GX-S 2-jaw self centering radial pneumatic gripper (series GX-S) Double acting. Very high gripping force at the end of the stroke. Long life and reliability, maintenance free. Various options for fastening.
Gas Pressure Regulator HON 300
Gas Pressure Regulator HON 300 OPERATING AND MAINTENANCE INSTRUCTIONS/ SPARE PARTS Serving the Gas Industry Worldwide 300.20 EDITION 01/2017 1. General The "General description 300.00" for the gas pressure
P2* MODULAR SUBPLATES FOR ISO (CETOP 03) VALVES
52 000/110 ED This series of modular subplates has been designed to make hydraulic circuits and can be used directly on power packs or on any other section of the machine. The subplates are assembled by
Inverse Proportional Pressure-Relief Cart., Size 2 4
Inverse Proportional Pressure-Relief Cart., Size Q max = l/min, p max = 35 bar Direct acting, electrically operated Description Compact construction for cavity type AL 3/-6 UNF Operated by a proportional
Proportional Pressure-Relief Cartridge Valve, Size 2...4
Proportional Pressure-Relief Cartridge Valve, Size... Q max = l/min, p max = 3 bar Direct acting, electrically operated 1 Description proportional pressure-relief valves are direct acting screw-in cartridges
Nickel-Plated Brass Right Angle Flow Control Valves NPTF/Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO
Nickel-Plated Brass Right Angle Flow Control Valves NPTF/Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO Swivel Design : Meter-Out, Meter-In and Needle Orifice Tube Diameter OD: 1/8, 5/2, 1/4, 5/16, /8
Data sheet Pressure switch type CS December 2001 DKACT.PD.P10.A B1119
Pressure switch type CS December 2001 DKACT.PD.P10.A2.02 520B1119 Introduction Pressure switch type CS is part of the Danfoss pressure control range. All CS pressure switches have a built-in pressure-operated,
Pressure-Relief Cartridge Valve, Size 4
Pressure-Relief Cartridge Valve, Size 4 Q max = 30 l/min, p max = 420 bar Seated design, direct acting, with mechanical operation Compact construction for cavity type AL 3/4-16 UNF High flow rates 7 pressure
Hydraulic comparison test pump Models CPP1000-X, CPP1600-X
Calibration Hydraulic comparison test pump Models CPP1000-X, CPP1600-X WIKA data sheet CT 91.12 for further approvals see page 2 Applications Calibration service companies and service industry Maintenance
Pressure reducing valve, pilot operated, Model 3DR
RA 26 928/06.98 Pressure reducing valve, pilot operated, Model 3DR Nominal size 16 Series 5X Maximum operating pressure 3600 PSI (250 bar) Maximum flow 58.1 GPM (220 L/min) Contents Description Page Features
Description Pressure range Connection thread Device Page
Pressure Regulator Pressure range onnection thread Device Page max. 22 l/min miniature -850 0 mbar 1 8 NPT V800.02 max. 22 l/min miniature -850 0 mbar 10-32 and flange V900.02 max. 0 l/min precise -1 +0,.4
screw fittings - nickel plated brass series SC
screw fittings - nickel plated brass series SC SC SCC SC SC SC SC SC SCC SC SC SC SCC SC SC SC2C SC2 SC2 SC SC3 SC3 SC0 SC design screw fitting with swivel nut connection 1/"...1/2" optionally cylindrical
Proportional Throttle Cartridges, Size 16
Proportional Throttle Cartridges, Size 16 Q max = 5 l/min, p max = 5 bar, Q N max = 14 l/min at p 1 bar Two-Stage, with Seat-Valve Shut-Off 1 Description Normally closed Seat-valve shut-off from 1 Compact
CONNECTION > Super-rapid fittings Series 6000 GENERAL DATA. Fitting with connecting tube. Sprint
Super-rapid fittings for plastic tubes Series 6000 Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3, M5, M6, M7), BSP (G1/8, G1/, G3/8, G1/2, G3/), BSPT (R1/8,
Pressure Reducing Valve DMV 755 set range: 1,0-9,0 bar
Pressure Reducing Valve DMV 755 set range:,0-9,0 bar Advantage pressure setting possible at any time, also during operation high reproducibility of the set pressure high level of operating safety and long
Pneumatic Gripping Modules. Pneumatic 2-Finger Radial Grippers
Pneumatic Gripping Modules Pneumatic 2-Finger Radial Grippers Pneumatic Gripping Modules Pneumatic 2-Finger Radial Grippers 2-FINGER RADIAL GRIPPERS Series Size Page Universal Grippers GWB 676 GWB 34 680
Pressure relief valve DHV 725 set range: 0,2-10,0 bar
Pressure relief valve DHV 75 set range: 0, - 0,0 bar Advantage pressure setting possible at any time, also during operation optimum monitoring valves high reproducibility of the set pressure high level
Type 4708 Supply Pressure Regulator
Type 478 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to.6 bar ( to 4 psi) or. to 6 bar (8 to
Pressure booster. Air Service Units Series Page. General 5.1. Pressure boosters ø Pressure boosters ø 40 c/w air pressure regulator 5.
Series 17 Pressure booster Page General Pressure boosters ø 4 Pressure boosters ø 4 c/w air pressure regulator Pressure booster ø 63 Pressure booster ø 63 c/w air pressure regulator Pressure booster ø
Filter FUTURA-SERIES. series 4. ordering information KFIL -
Filter FUTURA-SERIES item KFIL- KFIL- G / G description Sinterfi lter Zentrifugalkraft-Prinzip medium compressed air, neutral gases vertical medium- and ambient temperature max. 50 C supply pressure Pe
Type 4708 Supply Pressure Regulator
Type 708 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point range 0.5 to bar (8 to 90 psi) The pressure regulator
Nickel-Plated Brass Right Angle Flow Control Valves NPTF/Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO
Flow Control Valves NORTH MERICN FITTINGS & FLOW CONTROL VLVE CTLOG > Release 8.6 Nickel-Plated Brass Right ngle Flow Control Valves /Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO Swivel esign : Meter-Out,
Air service units series Y G1/4 to G1
Air service units series Y Series FY Filter, 12.071 Series RY+ RYP Pressure regulator, 12.076 Series FRY Filter/regulator, 12.080 Series OY Lubricator, 12.083 Series FROY Filter, Regulator, Lubricator
Components for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly.
Components preparation and pressure adjustment ABP Overview ABP is a component that enables boosting by s only up to twice primary pressure (.0MPa max.) in combination with using air tank but not using
Maximum 0.85 MPa pressure setting Long-life, high flow perfect for balancer applications
Outstanding performance in extremely low pressure and low pressure ranges from 0.003 to. Realizing high performance, energy saving, and compact size. Realize precise pressure control in a pressure range
SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection
SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 07-8 mm - pad mounting body M connection x/ - / - / Series 0 ISO 07- (8 mm) FEATURES M connection on top of valve: reduces
Product Information. Tolerance compensation unit TCU-Z
Product Information TCU-Z TCU-Z Compact. Flexible. Productive. TCU-Z tolerance compensation unit The TCU is compensated on the basis of elastomers that compensate in all three directions, enabling them
F l o w c o n T R o l v a l v E S
Composite Right Angle Flow Control Valves Series TMCU-TMVU-TMCO- BSP/METRIC Meter In, Meter Out, Needle Orifice G1/8, G1/, G3/8, G1/2 Banjo flow controllers Nominal diameters Ø 2-3.8-5.8-8 The Meter In,
Safety and Shut-off Block SAF/DSV
1. DESCRIPTION 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or user units. It complies with the relevant safety standards in accordance with
Series CGCN self-centering three-jaw grippers with T-guide
HANDLING AND VACUUM 2019 GRIPPERS > Series CGCN self-centering three-jaw grippers with T-guide New Double acting, magnetic Sizes: 50, 64, 80, 100, 125 mm The new Series CGCN pneumatic grippers are available
Inverse Proportional Pressure-Relief Cart., Size 2 4
Inverse Proportional Pressure-Relief Cart., Size Q max = l/min, p max = 5 bar Direct acting, electrically operated 1 Description inverse proportional pressure-relief valves are direct acting screw-in cartridges
Pressure reducing valve, pilot operated
Pressure reducing valve, pilot operated RE 26928/09.07 Replaces: 10.97 1/8 Type 3DR Size 16 Component series 5X Maximum operating pressure 250 bar Maximum flow 220 l/min H5844 Table of contents Content