SEMMME3-073 Checking that completed assemblies comply with specification

Size: px
Start display at page:

Download "SEMMME3-073 Checking that completed assemblies comply with specification"

Transcription

1 Checking that completed assemblies comply with specification Overview This unit identifies the competences you need to carry out checks on mechanical assemblies, in accordance with approved procedures. You will be required to prepare the work area, ensuring it is safe and free from hazards, to obtain all relevant and current documentation, and to obtain the tools and equipment required for the checking of mechanical assemblies, making sure that they are calibrated and in a safe and usable condition. You will be expected to conduct ongoing trials, manual checks and operational checks throughout the assembly operations, and checks on component parts and sub-assemblies will also be carried out, where appropriate. You will be responsible for confirming the assembly is complete, fit for purpose, and meets the operational performance required by the specification. In carrying out checks on mechanical assemblies, you will also be required to complete any relevant documentation accurately and legibly. Your responsibilities will require you to comply with organisational policy and procedures for checking the mechanical assembly, and to report any problems with the assembly you cannot personally resolve, or are outside your permitted authority, to the relevant people. You will be expected to ensure that all tools and equipment used in checking the assembly are correctly accounted for on completion of the activities and returned to the correct location. You will be expected to work with a minimum of supervision, taking personal responsibility for your own actions and for the quality and accuracy of the work that you carry out. Your underpinning knowledge will provide a good understanding of your work, and will provide an informed approach to applying quality control techniques and procedures including, where appropriate, British, European and International standards. You will understand the mechanical product being assembled, and its application, and will know about the tools and equipment used to check the assembly, in adequate depth to provide a sound basis for carrying out the activities to the required specification. You will understand the types of defect that can be found on the assembly, and how critical these defects are in determining the satisfactory performance of the completed product. You will understand the safety precautions required when carrying out the assembly activities. You will be required to demonstrate safe working practices throughout, and will understand the responsibility you owe to yourself and others in the workplace. SEMMME

2 Performance criteria You must be able to: P1 work safely at all times, complying with health and safety and other relevant regulations and guidelines P2 follow and make appropriate use of the specifications for the product or asset being checked P3 use all the correct tools and inspection equipment and check that they are in useable condition P4 carry out the checks in an appropriate sequence using approved methods and procedures P5 identify and assess any defects or variations from the specification and take appropriate action P6 report completion of compliance activities in line with organisational procedures SEMMME

3 Knowledge and understanding You need to know and understand: K1 the specific safety precautions to be taken while carrying out the mechanical assembly checks (including any specific legislation, regulations or codes of practice relating to the activities, equipment or materials) K2 the health and safety requirements of the work area in which you are carrying out the assembly checking activities, and the responsibility these requirements place on you K3 COSHH Regulations with regard to the substances used in the assembly process K4 the hazards associated with checking mechanical assemblies, and how to minimise them and reduce any risks K5 the personal protective equipment and clothing to be worn during the assembly checking activities K6 how to extract and use information from engineering drawings and related specifications (to include symbols and conventions to appropriate BS, ISO or BSEN standards) in relation to work undertaken K7 how to interpret first and third angle drawings, imperial and metric systems of measurement, workpiece reference points and system of tolerancing K8 the use of British, European and international standards used in determining if components and products are fit for purpose K9 the general principles of quality assurance systems and procedures K10 the various stages when the assembly should be checked, and to what level K11 preparations to be undertaken before the assembly is checked K12 the application of the various tools and equipment used to check the assembly K13 the importance of ensuring that tools and equipment are set up correctly and are in a safe and useable condition K14 the procedure and methods used to check that tools and equipment are within calibration date K15 the quality control procedures to be followed when checking the assembly K16 how to conduct any necessary checks to ensure the safety, accuracy, position, security, function and completeness of the assembly K17 the types of defect that can be found on mechanical assemblies, and why they occur K18 how to detect assembly defects, and what to do to rectify them K19 the factors to be considered when determining if assembly components or products should be scrapped or modified K20 the documentation to be completed to confirm that the assembly has SEMMME

4 been properly checked K21 the importance of ensuring that all tools and equipment are returned to their correct location on completion of the assembly checking activities K22 the extent of your own responsibility and to whom you should report if you have problems that you cannot resolve SEMMME

5 Additional Information Scope/range related to performance criteria You must be able to: 1. Carry out all of the following during the checking activities: 1.1 obtain and use the appropriate documentation (such as job instructions, drawings, quality control documentation, specifications) 1.2 adhere to procedures or systems in place for risk assessment, COSHH, personal protective equipment and other relevant safety regulations and procedures to realise a safe system of work 1.3 follow safe practice/approved inspection and checking techniques at all times 1.4 check that all tools and measuring equipment are within current calibration/certification dates 1.5 use lifting and slinging equipment in accordance with health and safety guidelines and procedures 1.6 ensure that all exposed openings are maintained free from foreign objects, dirt or other contamination 1.7 return all tools and equipment to the correct location on completion of the inspection activities 1.8 leave the work area in a safe and appropriate condition on completion of the activities 2. Check the mechanical assembly using twelve of the following instruments and gauges: 2.1 rule or tape 2.2 micrometers 2.3 vernier gauges 2.4 protractors 2.5 dial test indicator 2.6 levels 2.7 feeler gauges 2.8 slip gauges 2.9 squares 2.10 temperature gauges 2.11 straight edges 2.12 gauges 2.13 torque wrench 2.14 flow meters 2.15 optical equipment 2.16 electrical measuring equipment 2.17 pressure gauges 2.18 other specific equipment SEMMME

6 3. Use the relevant equipment to measure and check seven of the following features: 3.1 flatness 3.2 alignment 3.3 fit/working clearance 3.4 parallelism 3.5 distortion 3.6 squareness 3.7 level 3.8 angles 3.9 position/location 3.10 torque 3.11 concentricity 3.12 verticality 3.13 dimensions 3.14 bonding strength 4. Check the operational functions of the mechanical assembly, to include ten of the following: 4.1 rotation 4.2 speed 4.3 movement 4.4 tension 4.5 sequence 4.6 direction 4.7 pressure 4.8 balance 4.9 electrical in/outputs 4.10 distance/travel 4.11 sliding 4.12 flow 4.13 vibration 4.14 fluid power in/outputs 4.15 noise 4.16 timing 4.17 reciprocation 4.18 temperature 4.19 safety mechanisms 4.20 leakage 4.21 power 4.22 service supplies (such as water, gas, air, electrical supply) 5. Ensure that the completed assembly meets the specification, using two of the following checks: SEMMME

7 5.1 trial 5.2 under power 5.3 fully operational 5.4 manual check 6. Check that mechanical assemblies comply with one of the following quality and accuracy standards: 6.1 BS, ISO or BSEN standards and procedures 6.2 customer standards and requirements 6.3 company standards and procedures 6.4 specific system requirements SEMMME

8 Developed by SEMTA Version number 1 Date approved December 2008 Indicative review date Validity Status Originating organisation Original URN Relevant occupations December 2013 Current Original SEMTA O45NMME3-73 Engineering and manufacturing technologies; Engineering; Engineering Technicians Suite Mechanical Manufacturing Engineering Suite Key words Engineering, manufacturing, mechanical, checking, mechanical assemblies, operational function, specification, calibration, dimensions, tolerance SEMMME

SEMEEE36 Checking the compliance of electrical equipment against the specification

SEMEEE36 Checking the compliance of electrical equipment against the specification Checking the compliance of electrical equipment against the Overview This unit identifies the competences you need to carry out compliance checks on electrical equipment, in accordance with approved procedures.

More information

SEMETS3-17 Checking and calibrating mechanical inspection equipment

SEMETS3-17 Checking and calibrating mechanical inspection equipment Checking and calibrating mechanical inspection equipment Overview This unit identifies the competences you need to carry out calibration and setting activities on mechanical inspection equipment, in accordance

More information

SEMIC05 Installing mechanical equipment

SEMIC05 Installing mechanical equipment Overview This unit identifies the competences you need to install mechanical equipment, in accordance with approved procedures. This will require you to survey the site for the proposed installation, and

More information

SEMFWE SQA Unit Code H1W9 04 Forming platework using power rolling machines

SEMFWE SQA Unit Code H1W9 04 Forming platework using power rolling machines Overview This standard identifies the competencies you need to bend and form plate for fabrications in accordance with approved procedures using power operated pinch or pyramid rolls which may be hand

More information

SEMPEO SQA Unit Code FP2M 04 Maintaining mechanical devices and equipment

SEMPEO SQA Unit Code FP2M 04 Maintaining mechanical devices and equipment Overview This standard covers a broad range of basic mechanical maintenance competences that will prepare you for entry into the engineering or manufacturing sectors, creating a progression between education

More information

SEMAE3064 Installing aircraft visual display units and computer systems

SEMAE3064 Installing aircraft visual display units and computer systems Installing aircraft visual display units and computer systems Overview This standard identifies the competences you need to install aircraft visual display units and computer systems, in accordance with

More information

SEMEMI SQA Unit Code H2B7 04 Assisting in the installation of compressed air equipment

SEMEMI SQA Unit Code H2B7 04 Assisting in the installation of compressed air equipment Assisting in the installation of compressed air equipment Overview This unit identifies the competences you need to assist in the installation of compressed air equipment and systems, in accordance with

More information

SEMAE3071 Installing aircraft countermeasure systems

SEMAE3071 Installing aircraft countermeasure systems Overview This standard identifies the competences you need to install aircraft countermeasure systems, in accordance with approved procedures. It covers both fixed wing and rotary winged aircraft. You

More information

SEMEMI SQA Unit Code H2AX 04 Carrying out scheduled maintenance tasks on fluid power equipment

SEMEMI SQA Unit Code H2AX 04 Carrying out scheduled maintenance tasks on fluid power equipment Carrying out scheduled maintenance tasks on fluid power equipment Overview This unit identifies the competences you need to carry out scheduled maintenance tasks on fluid power equipment on mobile or static

More information

SEMCW2-10 Testing quartz watches

SEMCW2-10 Testing quartz watches Overview This unit identifies the competences you need to carry out tests on quartz watches and watch movements, in accordance with approved procedures. You will be required to carry out tests on a range

More information

SEMFWE3-33 SQA Unit Code HF2X 04 Cutting and shaping materials using portable thermal cutting equipment

SEMFWE3-33 SQA Unit Code HF2X 04 Cutting and shaping materials using portable thermal cutting equipment Cutting and shaping materials using portable thermal cutting equipment Overview This standard identifies the competencies you need for cutting and shaping plate (3mm thickness and above), rolled sections,

More information

Overview. SEMEMI211 SQA Unit Code HF4E 04 Carrying out modifications or rewiring electrical circuits

Overview. SEMEMI211 SQA Unit Code HF4E 04 Carrying out modifications or rewiring electrical circuits Overview This standard identifies the competences you need to modify or rewire electrical circuits and equipment, in accordance with approved procedures. This will involve modifying or rewiring electrical

More information

SEMEM3-73 Maintaining medical gas pipeline systems and equipment

SEMEM3-73 Maintaining medical gas pipeline systems and equipment Maintaining medical gas pipeline systems and equipment Overview This unit identifies the competences you need to carry out maintenance activities on medical gas pipeline systems and equipment, in accordance

More information

SEMEM3-65 Servicing anaesthetic and ventilation equipment

SEMEM3-65 Servicing anaesthetic and ventilation equipment Overview This unit identifies the competences you need to carry out servicing activities on anaesthetic and ventilation equipment, in accordance with approved procedures. You will be required to service

More information

SEMEMI SQA Unit Code H2AP 04 Carrying out fault location on electrical equipment and circuits

SEMEMI SQA Unit Code H2AP 04 Carrying out fault location on electrical equipment and circuits Carrying out fault location on electrical equipment and circuits Overview This unit identifies the competences you need to locate faults on electrical equipment and circuits, in accordance with approved

More information

SEMPEO SQA Unit Code FP2P 04 Maintaining fluid power equipment

SEMPEO SQA Unit Code FP2P 04 Maintaining fluid power equipment Overview This standard covers a broad range of basic fluid power maintenance competences which will prepare you for entry into the engineering or manufacturing sectors, creating a progression between education

More information

SEMFEW339 - SQA Unit Code H1WC 04 Slinging, lifting and moving materials and components

SEMFEW339 - SQA Unit Code H1WC 04 Slinging, lifting and moving materials and components Slinging, lifting and moving materials and components Overview This unit identifies the competencies you need to move loads by slinging and lifting in accordance with approved procedures. You will be required

More information

SEMFEW205 - SQA Unit Code H1VP 04 Joining materials by the manual MIG/MAG and other continuous wire processes

SEMFEW205 - SQA Unit Code H1VP 04 Joining materials by the manual MIG/MAG and other continuous wire processes Joining materials by the manual MIG/MAG and other continuous wire Overview This unit identifies the competencies you need to prepare and operate manual MIG, MAG or cored-wire arc welding equipment, in

More information

SEMFWE305 HY20 04 Welding materials by the Semi-Automatic MIG/MAG and Flux Cored Arc processes

SEMFWE305 HY20 04 Welding materials by the Semi-Automatic MIG/MAG and Flux Cored Arc processes SEMFWE305 HY20 04 Welding materials by the Semi-Automatic MIG/MAG and Flux Cored Overview This standard identifies the competencies you need to prepare and operate semi-automatic MIG, MAG and flux cored

More information

SEMEM3-78 Testing and calibrating instrumentation and control equipment and circuits

SEMEM3-78 Testing and calibrating instrumentation and control equipment and circuits Testing and calibrating instrumentation and control equipment and Overview This unit identifies the competences you need to carry out tests and calibration of instrumentation and control equipment and,

More information

SEMPEO SQA Unit Code H2CB 04 Preparing and Manoeuvring Armoured Fighting Vehicles (AFVs) for Maintenance and Transportation

SEMPEO SQA Unit Code H2CB 04 Preparing and Manoeuvring Armoured Fighting Vehicles (AFVs) for Maintenance and Transportation Preparing and Manoeuvring Armoured Fighting Vehicles (AFVs) for Maintenance and Transportation Overview This NOS identifies the competencies you need to carry out preparation and manoeuvring activities

More information

Maintaining mechanical devices and equipment. Outcome one

Maintaining mechanical devices and equipment. Outcome one 006 UNIT 019 Maintaining mechanical devices and equipment Learning outcomes 1 Maintain mechanical devices and equipment 2 Know how to maintain mechanical devices and equipment Performance evidence must

More information

SEMME269 - SQA Unit Code H2BK 04 Cutting and shaping using NC/CNC plasma or gas cutting machines

SEMME269 - SQA Unit Code H2BK 04 Cutting and shaping using NC/CNC plasma or gas cutting machines Cutting and shaping using NC/CNC plasma or gas cutting machines Overview This unit identifies the competences you need to carry out cutting and shaping operations using numerical control (NC) or computer

More information

SEMEEE3-34 Carrying out functional tests on electrical equipment

SEMEEE3-34 Carrying out functional tests on electrical equipment Overview This standard identifies the competences you need to carry out functional tests on electrical equipment, in accordance with approved procedures. You will be required to carry out pre-test inspections

More information

Overview. SEMEMI216 SQA Unit Code HF4G 04 Carrying out fault location on fluid power equipment and circuits

Overview. SEMEMI216 SQA Unit Code HF4G 04 Carrying out fault location on fluid power equipment and circuits Overview This standard identifies the competences you need to locate faults on fluid power equipment and circuits, on mobile or static plant, in accordance with approved procedures. You will be required

More information

SEMEM SQA Unit Code H2AL 04 Carrying out maintenance activities on mechanical equipment

SEMEM SQA Unit Code H2AL 04 Carrying out maintenance activities on mechanical equipment Carrying out maintenance activities on mechanical equipment Overview This standard identifies the competences you need to lead maintenance activities by carrying out corrective maintenance activities on

More information

Producing Aircraft Detail Assemblies. Ofqual unit reference number (code) Organisation Reference M/508/4691. Unit Level Level 2. Unit Sub Level GLH 64

Producing Aircraft Detail Assemblies. Ofqual unit reference number (code) Organisation Reference M/508/4691. Unit Level Level 2. Unit Sub Level GLH 64 Unit Title Ofqual unit reference number (code) Organisation Reference Producing Aircraft Detail Assemblies M/508/4691 QU051487 Unit Level Level 2 Unit Sub Level None GLH 64 Unit Credit Value 14 Sector

More information

Cutting and shaping materials using thermal cutting equipment

Cutting and shaping materials using thermal cutting equipment Unit 824 Cutting and shaping materials using thermal cutting equipment UAN: H/600/5883 Level: Level 2 Credit value: 14 GLH: 64 Relationship to NOS: This unit has been derived from national occupational

More information

SEMMPF201 Complying with Statutory Regulations and Organisational Safety Requirements

SEMMPF201 Complying with Statutory Regulations and Organisational Safety Requirements Complying with Statutory Regulations and Organisational Safety Overview This unit identifies the competences you need to deal with statutory regulations and organisational safety requirements, in accordance

More information

General maintenance engineering applications

General maintenance engineering applications Unit 068 General maintenance engineering applications Level: 2 Credit value: 12 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover

More information

SEMME2135 Assisting in modifying and adding electrical circuits in yachts and boats

SEMME2135 Assisting in modifying and adding electrical circuits in yachts and boats Assisting in modifying and adding electrical circuits in yachts and boats Overview This standard identifies the competences you need to assist with the modification or addition of electrical circuits in

More information

Assembling and testing fluid power systems

Assembling and testing fluid power systems Unit 020 Assembling and testing fluid power systems Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover

More information

SEMAER2_41 Dismantling and removing aircraft access structures

SEMAER2_41 Dismantling and removing aircraft access structures Overview This unit identifies the competences you need to dismantle and remove aircraft access structures, in accordance with approved procedures. You will be required to dismantle and remove the access

More information

General maintenance engineering applications

General maintenance engineering applications Unit 868 General maintenance engineering applications UAN: J/600/6007 Level: Level 2 Credit value: 12 GLH: 55 Relationship to NOS: Endorsement by a sector or regulatory body: Aim: This unit has been derived

More information

Employer s Unit of Competence Magnetic particle testing of materials, products and plant

Employer s Unit of Competence Magnetic particle testing of materials, products and plant Employer s Unit of Competence Magnetic particle testing of materials, products and plant Image - if cover page required Supported by lead employer Overview This unit identifies the competencies required

More information

SEMBIT SQA Unit Code F9JC 04 Complying with statutory regulations and organisational safety requirements

SEMBIT SQA Unit Code F9JC 04 Complying with statutory regulations and organisational safety requirements Complying with statutory regulations and organisational safety Overview This unit covers the competences needed to deal with statutory regulations and organisational safety. It does not deal with specific

More information

Overview IMPEM164K. This standard is for you if you work in food and drink operations or animal feed operations.

Overview IMPEM164K. This standard is for you if you work in food and drink operations or animal feed operations. Overview This standard is about the knowledge needed for you to carry out preventative planned maintenance and control equipment used in food and drink operations. Your underpinning knowledge will provide

More information

SEMLATA3-12 Measuring, weighing and preparing compounds and solutions for laboratory use

SEMLATA3-12 Measuring, weighing and preparing compounds and solutions for laboratory use Measuring, weighing and preparing compounds and solutions for Overview This unit covers the competences you need to measure, weigh and prepare compounds and solutions for laboratory investigations. Prior

More information

SEMEM4-40 Carrying out the testing and calibration of instrumentation control equipment and circuits

SEMEM4-40 Carrying out the testing and calibration of instrumentation control equipment and circuits Carrying out the testing and calibration of instrumentation control Overview This standard identifies the competences you need to lead and carry out tests and calibration of instrumentation and control,

More information

SEMEM SQA Unit Code HWAW 04 Carrying out maintenance activities on fluid power equipment

SEMEM SQA Unit Code HWAW 04 Carrying out maintenance activities on fluid power equipment Carrying out maintenance activities on fluid power equipment Overview This standard identifies the competences you need to lead maintenance activities by carrying out corrective maintenance activities

More information

SEMAE3327 Maintaining fuselage, nacelles and pylons on aircraft

SEMAE3327 Maintaining fuselage, nacelles and pylons on aircraft Overview This standard identifies the competences you need to carry out maintenance activities on aircraft fuselage, nacelles and pylons, in accordance with the approved aircraft maintenance manual, structural

More information

Maintaining electrical equipment/systems

Maintaining electrical equipment/systems Unit 037 Maintaining electrical equipment/systems Level: 2 Credit value: 15 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover

More information

Overview IMPEM163S. Carry out preventative planned maintenance on instrumentation and control equipment used in food and drink operations

Overview IMPEM163S. Carry out preventative planned maintenance on instrumentation and control equipment used in food and drink operations Overview This standard identifies the competences you need to carry out preventative planned maintenance activities on instrumentation and, in accordance with approved procedures. You will be required

More information

QPEO2/037N Credit Value: 15 QCF Level: 2 GLH: 68 Maintaining electrical equipment/systems

QPEO2/037N Credit Value: 15 QCF Level: 2 GLH: 68 Maintaining electrical equipment/systems Performing Engineering Operations QPEO2/037N Credit Value: 15 QCF Level: 2 GLH: 68 Maintaining electrical equipment/systems Learner Name: 2013 Excellence, Achievement & Learning Ltd EAL Assessment Route

More information

Inspecting a motorsport vehicle during a competition

Inspecting a motorsport vehicle during a competition Unit 057 Inspecting a motorsport vehicle during a Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to inspect

More information

COSAO26 Identify workplace health and safety hazards and control risks in asbestos surveying and analysis

COSAO26 Identify workplace health and safety hazards and control risks in asbestos surveying and analysis Identify workplace health and safety hazards and control risks in Overview This unit is about identifying hazards and assessing risks. You will also need to verify and implement methods and procedures

More information

EUSMUNC06 (SQA Unit Code - FG2W 04) Locate and avoid supply apparatus for Utilities Network Construction

EUSMUNC06 (SQA Unit Code - FG2W 04) Locate and avoid supply apparatus for Utilities Network Construction Locate and avoid supply apparatus for Utilities Network Construction Overview This national occupational standard defines the competence involved in locating and avoiding supply apparatus by using appropriate

More information

LANNAC3 - SQA Unit Code F8J4 04 Maintain the cleanliness of the working environment

LANNAC3 - SQA Unit Code F8J4 04 Maintain the cleanliness of the working environment Overview This standard is designed to be applicable to those who undertake routine cleaning of the workplace and the materials and equipment that are used in the course of normal work. The elements are:

More information

ASTICT1 - SQA Unit Code H54P 04 Prepare to carry out cleaning operations on information communication technology (ICT) equipment

ASTICT1 - SQA Unit Code H54P 04 Prepare to carry out cleaning operations on information communication technology (ICT) equipment Prepare to carry out cleaning operations on information communication technology (ICT) equipment Overview This standard is about making preparations to clean ICT equipment. It includes confirming instructions

More information

ASTC210 (SQA Unit Code - F4PS 04) Clean confined spaces

ASTC210 (SQA Unit Code - F4PS 04) Clean confined spaces Overview This unit is about maintaining levels of cleanliness in confined spaces. When working in confined spaces it is important to be vigilant against possible hazards and risks that may arise during

More information

Preparing and using manual gas welding equipment

Preparing and using manual gas welding equipment Unit 030 Preparing and using manual gas welding Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover a

More information

Gas Network Craftsperson

Gas Network Craftsperson Gas Network Craftsperson Unit EIAU06 Maintaining Instrumentation and Control Equipment Circuits This assessment specification has been developed as part of the network maintenance craftsperson standard

More information

This standard comprises the following:

This standard comprises the following: Overview in accordance with approved procedures and practices. This standard comprises the following: 1 Complete and check the initiation circuit 2 Clear and secure the danger zone 3 Sound warning and

More information

SKSTEX36(SQA Unit Code-H7C9 04) Calibrate textile production equipment

SKSTEX36(SQA Unit Code-H7C9 04) Calibrate textile production equipment Overview This standard is for those who carry out routine calibrations at prescribed intervals in order to keep equipment in calibration. The job role will involve: 1. Performing calibration 2. Identifying

More information

QUALIFICATION HANDBOOK

QUALIFICATION HANDBOOK QUALIFICATION HANDBOOK Level 2 NVQ Diploma in Performing Engineering Operations (7682) October 2013 Version 1.0 1712-70 - Level 3 NVQ Extended Diploma in Mechanical Manufacturing Engineering (601/0081/3)

More information

SKAC25 Operate plant to maintain the quality of pool water

SKAC25 Operate plant to maintain the quality of pool water Overview This unit is about operating swimming pool plant. The unit covers start-up and shut-down, routine maintenance and ensuring that the water quality, clarity and temperature are safe and within the

More information

COGPOLY39 Meet safety, health and environmental requirements in the workplace

COGPOLY39 Meet safety, health and environmental requirements in the workplace Meet safety, health and environmental requirements in the workplace Overview This unit is for those with responsibilities for meeting safety, health and environment requirements in the workplace. It is

More information

Working safely in an engineering environment

Working safely in an engineering environment Unit 001 Working safely in an engineering environment Level: 2 Credit value: 5 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to work

More information

SEMPEO SQA Unit Code FP3T 04 Maintaining electronic equipment/systems

SEMPEO SQA Unit Code FP3T 04 Maintaining electronic equipment/systems Overview This standard covers a broad range of basic electronic maintenance competences that will prepare you for entry into the engineering or manufacturing sectors, creating a progression between education

More information

EUSCS04 Overseeing work in confined spaces

EUSCS04 Overseeing work in confined spaces Overview This unit is about the duties of a safety attendant (top-man/woman) which does not require entries into confined spaces. It is about controlling the pre-entry procedures and entry into and out

More information

CCSSL35 Carry out the wiring and testing of electrical circuits and equipment

CCSSL35 Carry out the wiring and testing of electrical circuits and equipment Carry out the wiring and testing of electrical circuits and equipment Overview This standard is about the basic competences that you need to wire up and test electrical equipment and circuits for the theatre

More information

Overview EUSSAM12. Carry out tightness testing and direct purging of gas installations

Overview EUSSAM12. Carry out tightness testing and direct purging of gas installations Overview This standard covers tightness testing and direct purging of low or medium pressure gas, in accordance with approved procedures and practices. It covers the standards required to meet the requirements

More information

Gas Network Craftsperson

Gas Network Craftsperson Gas Network Craftsperson Unit EIAU016 Carrying out Fault Diagnosis on Electrical Equipment and Circuits This assessment specification has been developed as part of the network maintenance craftsperson

More information

Overview EUSDSG3.12. Install gas meters and regulators (2.5 to 16.0m3/hr)

Overview EUSDSG3.12. Install gas meters and regulators (2.5 to 16.0m3/hr) Overview This national occupational standard is for gas engineerswho are required to install and exchange meters and regulators (2.5 to 16.0m3/hr) on low pressure and medium pressure gas systems. This

More information

Level 3 NVQ in Installation and commissioning (1684) National occupational standards and assessment requirements

Level 3 NVQ in Installation and commissioning (1684) National occupational standards and assessment requirements Level 3 NVQ in Installation and commissioning (1684) National occupational standards and assessment requirements www.cityandguilds.com June 2004 Publications and enquiries The publications listed below

More information

METROLOGY LAB. I DEVICES BASED ON VERNIER SCALE

METROLOGY LAB. I DEVICES BASED ON VERNIER SCALE METROLOGY LAB. I DEVICES BASED ON VERNIER SCALE Indirect Measurement; two balls 2 Lab6: Roundness Test 12/1/2017 Indirect Measurement; four balls 3 Lab6: Roundness Test 12/1/2017 Angle measurement using

More information

ASTFFL9 - SQA Unit Code H54L 04 Assess and estimate work required to limit damage to contents after flood

ASTFFL9 - SQA Unit Code H54L 04 Assess and estimate work required to limit damage to contents after flood Assess and estimate work required to limit damage to contents after Overview 1 Confirm extent and nature of damage caused to contents by 2 3 ASTFFL9 1 Performance criteria Confirm extent and nature of

More information

Finishing Surfaces by Applying Treatments A/508/5116

Finishing Surfaces by Applying Treatments A/508/5116 Unit Title Ofqual unit reference number (code) Organisation Reference Finishing Surfaces by Applying Treatments A/508/5116 QU051751 Unit Level Level 2 Unit Sub Level None GLH 41 Unit Credit Value 9 Sector

More information

Moor, Tend Mooring And Unmoor Ship - Supervisor Level -

Moor, Tend Mooring And Unmoor Ship - Supervisor Level - Marine Terminal Operations Competency Standard Moor, Tend Mooring And Unmoor Ship - Supervisor Level - Industry : Oil, Chemical and Gas Industry Competency Category : 2.0 Moor, tend mooring and unmoor

More information

Understanding Statutory Regulations and Organisational Safety Requirements within a Medical Engineering Environment

Understanding Statutory Regulations and Organisational Safety Requirements within a Medical Engineering Environment This unit has 5 learning outcomes Learning Outcomes Assessment Criteria The learner will: 1. Know how to comply with statutory regulations and organisational safety requirements relating to Health and

More information

I N N O V A T I O N C O N T I N U E S... International Patent Filed in 45 Leading Countries

I N N O V A T I O N C O N T I N U E S... International Patent Filed in 45 Leading Countries I N N O V A T I O N C O N T I N U E S... Quick Check International Patent Filed in 45 Leading Countries World's First Single Piece Multi-Function Check Standard for Calibration or Verification of Various

More information

M i l l i n g O p e r a t i o n s I ( 1 1 C )

M i l l i n g O p e r a t i o n s I ( 1 1 C ) 8 8 5 4 M i l l i n g O p e r a t i o n s I ( 1 1 C ) 30S/30E/30M A Machining Technology Course 8 8 5 4 : M i l l i n g O p e r a t i o n s I ( 1 1 C ) 3 0 S / 3 0 E / 3 0 M Course Description Students

More information

GSA POLICY ON LOCAL EXHAUST AND OTHER VENTILATION (FUME CUPBOARDS)

GSA POLICY ON LOCAL EXHAUST AND OTHER VENTILATION (FUME CUPBOARDS) GSA POLICY ON LOCAL EXHAUST AND OTHER VENTILATION (FUME CUPBOARDS) Local Exhaust Ventilation Inspection & Maintenance 1 LOCAL EXHAUST AND OTHER VENTILATION Contents 1. Introduction 2. Design specifications

More information

Overview IMIARBBP21. Carry Out Motor Vehicle Body Metal Inert Gas (MIG) Brazing Operations

Overview IMIARBBP21. Carry Out Motor Vehicle Body Metal Inert Gas (MIG) Brazing Operations Overview This standard is about joining materials correctly and effectively using Metal Inert Gas (MIG) Brazing techniques and procedures. 1 Performance criteria You must be able to: 1. use the appropriate

More information

Overview EUSDSG3.6. Gas tightness testing and direct purging

Overview EUSDSG3.6. Gas tightness testing and direct purging Overview This national occupational standard is for gas engineers who will be carrying out tightness testing and direct purging of small(domestic) natural gas installations. This standard also covers the

More information

Installing, Repairing or Modifying Construction Resources by Heating, Welding, Brazing, Soldering and Thermal Cutting in the Workplace L/505/0144

Installing, Repairing or Modifying Construction Resources by Heating, Welding, Brazing, Soldering and Thermal Cutting in the Workplace L/505/0144 Unit Title Ofqual unit reference number (code) Organisation Reference QCF 665 Unit Level Unit Sub Level Installing, Repairing or Modifying Construction Resources by Heating, Welding, Brazing, Soldering

More information

The routine maintenance and inspection of local exhaust ventilation (LEV)

The routine maintenance and inspection of local exhaust ventilation (LEV) The routine maintenance and inspection of local exhaust ventilation (LEV) This document details the standards for inspection and maintenance that should be achieved for all local exhaust ventilation owned

More information

SFJFRSFF5 SQA Unit Code (H9FD 04) Protect life and the environment from the effects of hazardous materials

SFJFRSFF5 SQA Unit Code (H9FD 04) Protect life and the environment from the effects of hazardous materials Overview This standard is recommended for firefighters. This standard is about working as a team member to limit damage to the environment from (i.e. any materials that potentially present a hazard to

More information

ASTFFL8 SQA - Unit Code H54K 04 Assess and estimate work required to limit damage to structures after flood

ASTFFL8 SQA - Unit Code H54K 04 Assess and estimate work required to limit damage to structures after flood ASTFFL8 SQA - Unit Code H54K 04 Assess and estimate work required to limit damage to structures after Overview 1 Confirm extent and nature of damage caused to structures by 2 3 ASTFFL8 1 Performance criteria

More information

Installation Instructions For Flat Seated Bolted Type RAH Series Disk Holders

Installation Instructions For Flat Seated Bolted Type RAH Series Disk Holders Installation Instructions For Flat Seated Bolted Type RAH Series Disk Holders RA Series Rupture Disks 1. WARNING a) Read the complete instructions before attempting to install the rupture disk and holder

More information

SFJFF3 - SQA Unit Code D7WM 04 Save and preserve endangered life

SFJFF3 - SQA Unit Code D7WM 04 Save and preserve endangered life Overview This unit is about you working as a team member to search for life and rescue people during fires and other incidents. The unit may cover working as an individual but will usually involve being

More information

Level 2 Diploma in Aerospace and Aviation Engineering (Military Foundation Competence) ( )

Level 2 Diploma in Aerospace and Aviation Engineering (Military Foundation Competence) ( ) Level 2 Diploma in Aerospace and Aviation Engineering (Military Foundation Competence) (4608-50) Version 2.2 (September 2018) Qualification Handbook Qualification at a glance Subject area Mechanical City

More information

Regulator for 2 MPa ARX 20. How to Order. Bracket. Pressure gauge. Port size 1/8 1/4. Panel nut

Regulator for 2 MPa ARX 20. How to Order. Bracket. Pressure gauge. Port size 1/8 1/4. Panel nut Regulator for 2 MPa RX 2 How to Order RX2 1 Regulator 1 Regulating pressure.5 to.85mpa {.51 to 8.7kgf/cm²}.5 to.3mpa {.51 to 3.1kgf/cm²} Thread type Nil N F Rc(PT) NPT (PF) Port size 1 2 ccessories/options

More information

CLARKES ERO FEEDER MANUAL

CLARKES ERO FEEDER MANUAL CLARKES ERO FEEDER MANUAL It is the sole responsibility of the Owner and/or the Responsible Supervising Operators of this equipment to properly instruct their employees, either direct or contact, in the

More information

QCF Unit and Assessment Specification

QCF Unit and Assessment Specification QCF Unit and Assessment Specification Unit title Ofqual Unit code Working Safely in an Engineering Environment L/600/5781 SQA Unit code FT2R 60 SSC Ref Unit 78 History of changes Publication date: March

More information

1 2 CONTENTS INTRODUCTION Owner Information 4 Warranty Registration 5 Safety Instructions Safety 6 Safety Decals 7 Safety Identification Labels 8 Safety Notice 10 Safety Standards 11 Risk Assessment 13

More information

Level 3 Diploma in Moving Loads in Construction. Qualification Specification

Level 3 Diploma in Moving Loads in Construction. Qualification Specification Qualification Specification ProQual 2017 Contents Page Introduction 3 Qualification profile 3 Qualification structure 4 Centre requirements 4 Support for candidates 5 Assessment 5 Internal quality assurance

More information

Overview ASTATT3. Carry out air tightness testing for single dwellings and other small buildings

Overview ASTATT3. Carry out air tightness testing for single dwellings and other small buildings Overview This standard is for those who carry out air tightness and/or change rate testing of single dwellings and small up to a gross internal volume of 4000m³ inside the thermal line as defined by EN13829

More information

Overview ASTATT2. Prepare building for air tightness. testing

Overview ASTATT2. Prepare building for air tightness. testing Overview This standard is for those who carry out air tightness and/or change rate of buildings of any size or complexity. It covers those activities carried out to prepare the building for the conduct

More information

GUIDANCE NOTES ON LOLER REGULATIONS FOR RIVERIA MK1.MK2 & MK3 AND BELLAVITA BATH LIFT. Lifting Operations and Lifting Equipment Regulations 1998

GUIDANCE NOTES ON LOLER REGULATIONS FOR RIVERIA MK1.MK2 & MK3 AND BELLAVITA BATH LIFT. Lifting Operations and Lifting Equipment Regulations 1998 GUIDANCE NOTES ON LOLER REGULATIONS FOR RIVERIA MK1.MK2 & MK3 AND BELLAVITA BATH LIFT Lifting Operations and Lifting Equipment Regulations 1998 (LOLER 98) Prepared by Mike Heath. Community Supply Manager/Bath

More information

KBV21i and KBV40i Key Operated Boiler Blowdown Valves Installation and Maintenance Instructions

KBV21i and KBV40i Key Operated Boiler Blowdown Valves Installation and Maintenance Instructions 4059051/3 IM-P405-48 EMM Issue 3 KBV21i and KBV40i Key Operated Boiler Blowdown Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4.

More information

Un-Pressurized Orefice Fittings FIO EZ. Parts List and Operation Instructions TECHNICAL MANUAL. Dn 2-6 Class Lbs

Un-Pressurized Orefice Fittings FIO EZ. Parts List and Operation Instructions TECHNICAL MANUAL. Dn 2-6 Class Lbs Un-Pressurized Orefice Fittings FIO EZ Parts List and Operation Instructions TECHNICAL MANUAL Dn 2-6 Class 150-600 Lbs US US 2 FIO EZ - MT 108-US - 05-2016 FIO EZ Important Instructions US Pietro Fiorentini

More information

RISK ASSESSMENT A UNIVERSITY GUIDE TO PRACTICAL RISK ASSESSMENT UNDER THE MANAGEMENT OF HEALTH AND SAFETY AT WORK REGULATIONS 1992

RISK ASSESSMENT A UNIVERSITY GUIDE TO PRACTICAL RISK ASSESSMENT UNDER THE MANAGEMENT OF HEALTH AND SAFETY AT WORK REGULATIONS 1992 RISK ASSESSMENT A UNIVERSITY GUIDE TO PRACTICAL RISK ASSESSMENT UNDER THE MANAGEMENT OF HEALTH AND SAFETY AT WORK REGULATIONS 1992 PERSONNEL DIVISION REVIEWED AUTUMN 1999 CONTENTS Page 1 INTRODUCTION 1

More information

EXHIBITION Guide. Roles and Responsibilities OS11. A handbook for exhibitors and contractors

EXHIBITION Guide. Roles and Responsibilities OS11. A handbook for exhibitors and contractors Appendix 1 Health & Safety Declaration, Roles and Responsibilities Each exhibitor and Informa appointed contractor must complete the Health and Safety Declaration form provided below to confirm they have

More information

Wheeler Cranes 6 McIntyre Rd Tomago NSW 2324

Wheeler Cranes 6 McIntyre Rd Tomago NSW 2324 Wheeler Cranes 6 McIntyre Rd Tomago NSW 2324 ABN: 34 088 229 190 This SWMS has been developed and authorised by: Name Steve Smallman Position Safety & Systems Manager Date 21/6/13 Phone 0249649991 Signature

More information

INFORMATION NOTE No 353: MICROBIOLOGICAL TESTING

INFORMATION NOTE No 353: MICROBIOLOGICAL TESTING INFORMATION NOTE No 353: MICROBIOLOGICAL TESTING First issued: January 2007 Updated: June 2010 ABOUT ISRM This is one of a series of Information Notes produced by the Institute of Sport and Recreation

More information

GI Series Diaphragm Pressure Gauge Guard

GI Series Diaphragm Pressure Gauge Guard Diaphragm Pressure Gauge Guard INSTRUCTION MANUAL Please read this Instruction Manual Carefully and Thoroughly for the Correct and Optimum use of this Product. Kindly keep this manual in a convenient place

More information

CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH PROCEDURE

CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH PROCEDURE CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH PROCEDURE 1. INTRODUCTION The University uses substances hazardous to health in many of its operations, and accepts that it has a duty of care to reduce exposure

More information

Overview LANCS79 - HY3G 04. Control vertebrate pests and predators by shooting

Overview LANCS79 - HY3G 04. Control vertebrate pests and predators by shooting Overview This standard is about controlling vertebrate pests and predators by shooting. It relates to the work activities that you undertake to control vertebrate pests and predators using a firearm. To

More information

Reinstatement of sub-base and base (roadbase) in non-bituminous materials

Reinstatement of sub-base and base (roadbase) in non-bituminous materials This unit covers the requirements that you must meet when reinstating sub-base and base (roadbase) in. You must ensure that you act in accordance with all current specifications and procedures and that

More information