ISO Sub-bases. Port sizes G 1 /4 - G1 and 1 /4NPT - 1 /2NPT. Sub-bases tovdma specification, for ISO sizes #1, #2, #3 and #4

Size: px
Start display at page:

Download "ISO Sub-bases. Port sizes G 1 /4 - G1 and 1 /4NPT - 1 /2NPT. Sub-bases tovdma specification, for ISO sizes #1, #2, #3 and #4"

Transcription

1 Port sizes 1 / - 1 and 1 /NPT - 1 /NPT Sub-bases tovd 3 specification, for ISO sizes #1, #, #3 and # Universal bases for ISO sizes #1 and #, side and bottom ported Technical Data edium: See individual valve details. ounting: Through-holes in sub-base, threaded. Port Sizes: 1 / ISO#1 3 /8 ISO# 1 / ISO#3 3 / ISO# Operating Pressure: 16 bar (3 psig) for VD bases 10 bar (1 psig) for Universal bases Operating Temperature: -1 º to +80 º ( º to +176 º ) for VD bases -1 º to +0 º ( º to + º ) for Universal bases aterials: Diecast aluminium, steel cap head screws and nuts, nitrile rubber seals. Ordering Information To order select model number, e.g. /P19137 for the Bottom Ported ISO#3 Single Station Sub-base. or VD 3 Sub-bases,quote the required number of bases together with one nd Plate ssembly per island, e.g. off Q/3/3/1 together with 1 off Q/3/3/ for a station valve island. or Universal Sub-bases, quote the required number of bases together with two Single nd Plates per island, e.g. off Q/1/3/7 with 1 off Q/1/3/8 and 1 off Q/1/3/31 for a station valve island. ll Sub-bases and nd Plates are supplied complete with the appropriate seals, nuts and bolts.the interface gaskets and body to base fixing bolts are supplied with individual valve bodies. or technical data on ISO 99-1 interface valve ranges see following sections: ISO STR..18 UTO STR..186 U/ N/**

2 VD 3 Base Range, -ported version VD 3 orm orm B orm orm D orm Single Station Sub-base Single Station Sub-base odular Sub-base odular Sub-base Directional ylinder Side Ported Bottom Ported Bottom Ported 1) nd Plates () Port Device (90 ) ISO #1 models /P196 /P19 Q/1/3/1 Q/1/3/ P 8361 ISO # models /P1913 /P19131 Q/3/3/1 Q/3/3/ P 861 ISO #3 models /P19138 /P19137 Q/3/3/1 Q/3/3/ P 861 ISO # models /P191 /P1913 Q/6/3/1 Q/6/3/ P ) Pilot ports on side VD 3 Base Range, NPT-ported version VD 3 orm orm orm D Single Station Sub-base odular Sub-base odular Sub-base Side Ported Bottom Ported 1) nd Plates () ISO #1 models /P196 Q/1/3/1 Q/1/3/ ISO # models /P1913 Q/3/3/1 Q/3/3/ ISO #3 models /P19138 Q/3/3/1 Q/3/3/ 1) Pilot ports on side ccessories to VD 3 Base Range Transition plate Blanking disk ) Blanking Platte 3) ISO #1 models Q/1/3/ #1 # P 838 Q/1/3/3 ISO # models Q/3/3/ # #3 P 88 Q/3/3/3 ISO #3 models Q/3/3/ #3 # P 88 Q/3/3/3 ISO #3 models Q/3/3/3 #3 #1 Q/6/3/3 ) or ultipressure systems 3) an be used on Universal base too. Overview odel Type ISO Size Port Size Pilot Port Size Weight /P196 Single Station Sub-base Side Ported #1 1/ 1/ (0.3) /P1913 Single Station Sub-base Side Ported # 3/8 1/8 0.8 (0.6) /P19138 Single Station Sub-base Side Ported #3 1/ 1/ (0.79) /P191 Single Station Sub-base Side Ported # 3/ 1/ (.16) /P196 Single Station Sub-base Side Ported #1 NPT1/ NPT1/ (0.3) /P1913 Single Station Sub-base Side Ported # NPT3/8 NPT1/8 0.8 (0.6) /P19138 Single Station Sub-base Side Ported #3 NPT1/ NPT1/ (0.79) /P19 Single Station Sub-base Bottom Ported #1 1/ 1/ (0.) /P19131 Single Station Sub-base Bottom Ported # 3/8 1/8 0.3 (0.70) /P19137 Single Station Sub-base Bottom Ported #3 1/ 1/8 0.0 (0.88) /P1913 Single Station Sub-base Bottom Ported # 3/ 1/8 0.7 (1.8) Q/1/3/1 odular Sub-base Bottom Ported #1 1/ 1/8 0. (0.3) Q/3/3/1 odular Sub-base Bottom Ported # 3/8 1/ (0.79) Q/3/3/1 odular Sub-base Bottom Ported #3 1/ 1/8 0.7 (1.8) Q/6/3/1 odular Sub-base Bottom Ported # 3/ 1/8 1.0 (3.08) Q/1/3/1 odular Sub-base Bottom Ported #1 NPT1/ NPT1/8 0. (0.3) Q/3/3/1 odular Sub-base Bottom Ported # NPT3/8 NPT1/ (0.79) Q/3/3/1 odular Sub-base Bottom Ported #3 NPT1/ NPT1/8 0.7 (1.8) Q/1/3/ odular Sub-base nd Plates () #1 3/8 0. (0.8) Q/3/3/ odular Sub-base nd Plates () # 1/ 0.3 (0.7) Q/3/3/ odular Sub-base nd Plates () # (1.) Q/6/3/ odular Sub-base nd Plates () # (.86) Q/1/3/ odular Sub-base nd Plates () #1 NPT3/8 0. (0.8) Q/3/3/ odular Sub-base nd Plates () # NPT1/ 0.3 (0.7) Q/3/3/ odular Sub-base nd Plates () #3 NPT (1.) or dimensions and drawings see next page. N/**

3 I ISO 99-1 Sub-bases VD 3 Sub-base Options Single Station Sub-base Side Ported (orm ) P 1 D Q Single Station Sub-base Bottom Ported (orm B ) B */P196 */P1913 */P19138 /P191 Dimension ISO#1 ISO# ISO#3 ISO# 8 (1,88) 7 (,8) 71 (,8) 8 (3,0) I 1 3 O N B, (0,) 6 (0,) 6,6 (0,6) 9 (0,36) 1 / ( or NPT) 3 /8 ( or NPT) 1 / ( or NPT) 3 / D 1 /8 ( or NPT) 1 /8 ( or NPT) 1 /8 ( or NPT) 1 /8 3 (1,8) 0 (1,60) 3 (1,8) (1,68) 10 (0,0) 13 (0,) 18 (0,7) 19 (0,76) 11,3 (0,) 1 (0,6) 17 (0,68) 19 (0,76) 3, (0,9) 30 (1,0) (0,88) 30 (1,0) I 110 (,0) (,96) 19 (,96) 186 (7,) (0,96) 30 (1,0) 3 (1,8) (1,68) 3 (1,7) 6 (,) 68 (,7) 90 (3,60) 8 (,3) 7 (,96) 90 (3,60) 111 (,) 98 (3,9) 1 (,8) 136 (,) 170 (6,80) N 8 (3,36) 9 (3,80) 119 (,76) 18 (,9) O 1, (0,8) 6 (1,0) 17 (0,67) (0,88) P 11, (0,) 1 (0,) 17 (0,67) (0,88) Q (,16) 6 (,) 7, (,93) 99, (3,91) * Insert for -ported version or for NPT-ported version. Q O D I P 3 1 B 1 N /P19 /P19131 /P19137 /P1913 Dimension ISO#1 ISO# ISO#3 ISO# 6 (1,8) 6 (,8) 71 (,8) 8 (3,0) B 7 (0,8) 8 (0,3) 10 (0,0) 1 (0,60) 3 (0,9) 7 (1,08) 3 (1,36) 0 (1,60) D, (0,) 6,6 (0,6) 6,6 (0,6) 9 (0,36) 1 / 3 /8 1 / 3 / 1 /8 1 /8 1 /8 1 /8, (0,) 6,6 (0,) 6,6 (0,6) 9 (0,30) 30 (1,0) 3 (1,0) 3 (1,8) 8 (1,) I 10 (0,0) 13 (0,) 18 (0,7) 19 (0,76) (0,0) 6, (0,) 9 (0,36) 9, (0,38) 110 (,0) (,96) 19 (,96) 186 (7,) (0,88) 8 (1,) 3 (1,36) (1,80) 6 (1,8) 6 (,) 68 (,7) 90 (3,60) N 6 (,8) 73 (,96) 90 (3,60) 111 (,) O 98 (3,9) 1 (,8) 136 (,) 170 (6,80) P 8 (3,36) 9 (3,80) 119 (,76) 18 (,9) Q (,16) 6 (,) 7, (,93) 99, (3,91) odular Sub-bases and nd Plates (orm and D ) T D +(n x ) B+(n x ) 1 /8 ( or NPT) O P Q S S R Sub-base Q*/1/3/1 Q*/3/3/1 Q*/3/3/1 Q/6/3/1 nd Plates Q*/1/3/ Q*/3/3/ Q*/3/3/ Q/6/3/ Dimension ISO#1 ISO# ISO#3 ISO# (1,76) (,08) 60 (,0) 60 (,0) B (0,88) 6 (1,0) 30 (1,0) 30 (1,0) 3 (1,7) 6 (,8) 71 (,8) 8 (3,8) D 11 (0,) 13 (0,) 1 (0,60) 1 (0,60) 1, (0,06) (0,0) 6 (0,) 8 (0,3) 7, (0,30) 6 (0,) 8 (0,3) 9 (0,36) (0,88) 6 (1,0) 30 (1,0) 30 (1,0) 8 (1,) 3 (1,0) (,08) 6 (,8) I 7 (0,8) 9 (0,36) (0,8) (0,8) 8, (0,3) 9 (0,36) 10 (0,0) 10 (0,0) 6 (1,0) 30 (1,0) 38 (1,) (,0) 1 / ( or NPT) 3 /8 ( or NPT) 1 / ( or NPT) 3 / ( or NPT) O 6 (1,8) 7 (1,88) 6 (,) 8 (,3) P 1 (0,8) (0,88) 31 (1,) 8 (1,) Q (0,96) (0,96) 3 (1,36) 8 (1,) R 110 (,0) 13 (,0) 190 (7,60) 1 (8,60) S 8 (1,) 3 (1,36) (,08) (,16) T 3 /8 ( or NPT) 1 / ( or NPT) 1 ( or NPT) 1 Inclusive of screws, nuts, washers and O-Rings. * Insert for -ported version or for NPT-ported version ll dimensions in mm (inch)! N/**

4 Directional ylinder Port Device (orm ) odel No. P8361 P861 P891 P8661 Dimension ISO#1 ISO# ISO#3 ISO# 1 / 3 /8 1 / 3 / B 19 (0,7) 3 (0,89) 7 (1,0) 33 (1,8), (0,1) 6,6 (0,) 9 (0,3) 9 (0,3) D 10 (0,39) 11 (0,) 1 (0,8) 1 (0,8) 13 (0,0) 1 (0,8) 19 (0,7) 6 (1,01) 7, (0,30) 6 (0,) 8 (0,31) 9 (0,3) 71 (,76) 86 (3,3) 130 (,07) 1 (,3) 3 (0,11) 3 (0,11) 3 (0,11) 3 (0,11) I 110 (,9) 13 (,6) 190 (7,1) 1 (8,38) (0,6) 1 (0,) 17 (0,66) 3 (0,89) 37 (1,) 0 (1,6) (1,7) 6 (,3) (0,97) 6 (1,01) 9 (1,13) (1,71) (0,8) 9 (1,13) 36 (1,) 1 (1,60) N (1,6) (,1) 70 (,73) 80 (3,) O 1, (0,06) (0,19) 6 (0,) 8 (0,31) P 9 (3,70) 11 (,8) 168 (6,) 18 (7,16) Q 1, (0,0) 1, (0,0) 1, (0,0) 1, (0,0) R,7 (0,) 6,8 (0,6) 9 (0,3) 9 (0,3) Weight 0.3 (0.77) 0.70 (1.) 1.0 (.88).60 (.73) Inclusive of screws and O-Rings. Transition Plate odel No. Q/1/3/ Q/3/3/ Q/3/3/ Q/3/3/3 Dimension ISO#1 # ISO# #3 ISO#3 # ISO#3 #1 (0,97) 0 (1,6) 0 (1,6) 3 (1,36) B Weight 0.3 (0.77) 0.6 (1.) 0.90 (1.98) 0.60 (1.33) Inclusive of screws, washers and O-Rings. ll dimensions in mm (inch)! N/**

5 Universal Base Range odular Sub-base Single nd Plate Single nd Plate Transition Plate Blanking Disk Side and Bottom Ported ll Ports closed nd Ports open ISO #1 models Q/1/3/7 Q/1/3/8 Q/1/3/31 Q/1/3/9 #1 # /P3173 ISO # models Q/3/3/7 Q/3/3/8 Q/3/3/31 /P317 odular Sub-base B N 1 Side and Bottom Ports. Pilot ports on bottom. Inclusive of screws, nuts, washers, O-rings and two plugs for ports +. odel ISO Size B N Weight Q/1/3/7 #1 106 (,) 3 (1,7) 36 (1,) 9 (3,68), (0,) 1/ 1/8 18 (0,7) 6 (,6) 11, (0,) (0,8) 3 (0,90) 0.16 (0.3) Q/3/3/7 # 0 (,80) 6 (,) 6 (1,8) 10 (0,8) 6, (0,6) 3/8 1/8 (0,96) 68 (,7) 19 (0,76) 1 (0,60) 9 (1,1) 0.3 (0.77) Single nd Plates odel onnections Q/1/3/8, Q/3/3/8 Q/1/3/31, Q/3/3/31 ll ports closed nd Ports open onnections can be in end, bottom or top. Drill dimension for opening the ports: ø 8 mm drill for 1 / port ø 1 mm drill for 3 /8 port ø 1 mm drill for 1 / port B Inclusive of screws, nuts, washers and O-rings. T Note: These nd Plates can also be used as Intermediate Supply and xhaust odules! odel ISO Size B T Weight Q/1/3/8, Q/1/3/31 #1 106 (,) (0,88) 36 (1,) 9 (3,68), (0,) 3/8 1/ (1,76) (1,00) 9 (0,36) 0.13 (0.8) Q/3/3/8, Q/3/3/31 # 0 (,80) 9 (1,16) 6 (1,8) 10 (,08) 6, (0,6) 1/ 1/ 8 (,3) 31 (1,) 7 (0,8) 0.3 (0.0) Transition Plate ISO #1 # Blanking Plate or ultipressure systems! odel Weight Q/1/3/9 0.3 (0.0) Inclusive of screws, nuts, washers and O-rings! odel ISO Size Weight /P3173 # (0.0) /P317 # 0.03 (0.06) ll dimensions in mm (inch)! N/**

6 Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under Technical Data. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult NORRN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products where applicable. N/**

R18 General purpose pressure regulators

R18 General purpose pressure regulators > > Port size: / & (ISO G, PTF) > > Can be installed at any point in the compressed air system without regard to accessibility pilot regulator can be installed in the most convenient location > > Accurate

More information

BL68 - Olympian Plus, plug-in system Filter/regulators and lubricators

BL68 - Olympian Plus, plug-in system Filter/regulators and lubricators >> Port size: 3/4... /2 (ISO G/ PTF) >> Complete air processing units pre-assembled, ready to install Technical features Medium: Compressed air only Maximum operating pressure: 7 bar (246 psi) Pressure

More information

Non-Return Valves T55 Series

Non-Return Valves T55 Series T55 Series In-Line, Non-Return Valves M5, 1 8", 1 2" BSPP, BSPT, NPT Permit free flow of air in one direction only Simple, reliable design Light weight Silicone free Low cracking pressure Technical ata

More information

SPCH/ Blowing block

SPCH/ Blowing block > > for linear stretch blow moulding machines > > Compact and safe design > > Best suited for PET bottles up to litres, depending on cycle time Technical features Medium: Compressed air (purity class 3..3

More information

Quick Release Couplings 233 Series

Quick Release Couplings 233 Series Quick Release ouplings 233 Series 4mm - 9mm I/ hose 1 8" - 1 4" SP thread Low pressure drop across coupling High flow rate ompact construction One hand operation Robust construction Various connection

More information

Nugget 120 V14 Series

Nugget 120 V14 Series Nugget 0 V Series /2 & /3 Valves Solenoid and Pilot Operated G 1 4 High flow compact valves Sub-base and low profile manifolds Light weight, long life corrosion resistant materials Multipole and Fieldbus

More information

Pneumatic Function Fittings Metric & Inch

Pneumatic Function Fittings Metric & Inch Metric & nch Sensor Fitting Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage Simpler pneumatic systems liminates need for electrical reed switches

More information

R84G - Excelon Plus Modular System Pressure regulators

R84G - Excelon Plus Modular System Pressure regulators > Port size: 3/8... 3/4 (ISO G/PTF) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Easy to read flush mounted integrated pressure gauge as

More information

B74G - EXCELON Modular System General purpose filter/regulator

B74G - EXCELON Modular System General purpose filter/regulator > Port size: /8... / (ISO G/PTF) > Excelon design allows in-line installation or modular installation with other Excelon products > Push to lock adjusting knob with optional tamper resistant accessory

More information

Nugget 120 V14 Series

Nugget 120 V14 Series Nugget 0 V Series /2 & /3 Valves Solenoid and Pilot Operated G 1 4 High flow compact valves Sub-base and low profile manifolds Light weight, long life corrosion resistant materials Multipole and Fieldbus

More information

V83 series Redundant valve manifold systems - Modular with bypass 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability

V83 series Redundant valve manifold systems - Modular with bypass 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability V8 series Redundant valve manifold systems - Modular with bypass oo Safety, oo Availability and oo Safety and Availability > > Modular design - Maxseal valves > > able terminations inside coil housing

More information

F68G - Olympian Plus plug-in system General purpose filter

F68G - Olympian Plus plug-in system General purpose filter > > Port size: /... / (ISO G/ PTF) > > Olympian Plus plug in system > > Large filter element area provides minimum pressure drop > > Effective liquid removal and positive solid particle filtration Technical

More information

Mounting and Operating Instructions EB 8546 EN. Type 4708 Supply Pressure Regulators. Translation of original instructions. Type Type

Mounting and Operating Instructions EB 8546 EN. Type 4708 Supply Pressure Regulators. Translation of original instructions. Type Type Type 4708 Supply Pressure Regulators Translation of original instructions Type 4708-53 Type 4708-64 Type 4708-12 Mounting and Operating Instructions Edition March 2018 Note on these mounting and operating

More information

Precision and Instrument Regulators 1/4" port size

Precision and Instrument Regulators 1/4 port size Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38

More information

B84G - Excelon Plus Modular System General purpose filter/regulator

B84G - Excelon Plus Modular System General purpose filter/regulator > Port size: 3/8... 3/4 (ISO G/PTF) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Push to lock adjusting knob with built in tamper resistant

More information

299H Series. Introduction. P.E.D. Categories. Specifications. Installation. Warning. Installation Guide English September 2012

299H Series. Introduction. P.E.D. Categories. Specifications. Installation. Warning. Installation Guide English September 2012 Installation Guide English September 2012 299H Series Introduction This Installation Guide provides instructions for installation, startup, and adjustment of 299H Series regulators. To receive a copy of

More information

Type ACE97. Introduction. Installation. P.E.D. Categories. Specifications. Overpressure Protection. Installation Guide English May 2002

Type ACE97. Introduction. Installation. P.E.D. Categories. Specifications. Overpressure Protection. Installation Guide English May 2002 Installation Guide English May 2002 Type ACE97 Introduction This installation guide provides instructions for installation, startup, and adjustment. To receive a copy of the instruction manual, contact

More information

Instruction Manual. Standard Surge Eliminator. Standard X. Flushable X - X

Instruction Manual. Standard Surge Eliminator. Standard X. Flushable X - X Standard Surge Eliminator Standard 104052 - X Flushable 104053 - X - X Page 2 of 16 Issue: 2.3 Index Section 1.1 General Description 1.2 Operating Principle 1.3 Specification 1.4 Fitting Selection - Standard

More information

Pneumatic pressure switch 20DD

Pneumatic pressure switch 20DD Sensor system: stainless steel 0,2 to 6 bar Microswitch with gold plated contacts (suitable for intrinsically safe operation) High accuracy (max. scattering < 1,5%) Excellent sealing properties (better

More information

180 Series Rotary Shear Directional Control Valve

180 Series Rotary Shear Directional Control Valve 180 Series Rotary Shear Directional Control Valve Up to l 38 lpm, 10 US gpm l 700 bar, 10,000 psi Milwaukee, WI 53235, US el: +1 (414) 769-6400 sales-us@webtec.com St. Ives, Cambs. E27 3LZ, UK el: +44

More information

B84G - Excelon Plus Modular System General purpose filter/regulator

B84G - Excelon Plus Modular System General purpose filter/regulator > Port size: 3/8" to 3/4" (PTF/ISO G) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Push to lock adjusting knob with built in tamper resistant

More information

64 Series Pressure Reducing Regulators

64 Series Pressure Reducing Regulators Instruction Manual Form 1245 64 Series March 2006 64 Series Pressure Reducing Regulators W1943 Figure 1. 64 Series Regulator Introduction Scope of Manual This manual provides instructions for the installation,

More information

Valves ISO 5599/1 ISO 1, 5/2-5/3, electrically operated, with CNOMO pilot

Valves ISO 5599/1 ISO 1, 5/2-5/3, electrically operated, with CNOMO pilot ISO 1, - 5/3, electrically operated, with CNOMO pilot Executions 0300 ISO1E50 NOTE: FOR VALVES WITH PILOT IN LINE SEE PAGE.111.1 Technical data 03030 ISO1E51 03037 ISO1E5 03031 ISO1E70 0303 ISO1E71 03043

More information

lternative odels 3.87 (98) anual Drain 2.67 (68) 3.72 (94) utomatic Drain 2.13 (54) 1.12 (28) P1H, PTH Filter/Regulator-Lubricator Combination Units 0

lternative odels 3.87 (98) anual Drain 2.67 (68) 3.72 (94) utomatic Drain 2.13 (54) 1.12 (28) P1H, PTH Filter/Regulator-Lubricator Combination Units 0 ir line equipment P1H, PTH Filter/Regulator- Lubricator Combination Units 07 Series Compact design Filter removes liquids and solid particles down to 5 µm Push to lock adjusting knob with tamper resistant

More information

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant). Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)

More information

SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection

SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 07-8 mm - pad mounting body M connection x/ - / - / Series 0 ISO 07- (8 mm) FEATURES M connection on top of valve: reduces

More information

Directional Valves. Hydraulic Operated Directional Valves

Directional Valves. Hydraulic Operated Directional Valves Service Data Vickers Directional Valves Hydraulic Operated Directional Valves (F*) DG3V 8 (B) ** (L) (X) (*) (*) 10 (EN**) Released 04/96 5007.03/EN/0496/S DG3V-8-*(C) - (X) - 10 Spring Centered 473726

More information

IP2, IP2A and IP2D. Spirax-Monnier International Compressed Air Filter/ Regulators

IP2, IP2A and IP2D. Spirax-Monnier International Compressed Air Filter/ Regulators Page 1 of 6 TI-P510-01 H Issue 5 IP2, IP2 and IP2D ISO 9001 Spirax-Monnier International ompressed ir Filter/ Regulators ert. No. LRQ 0963008 Description The IP range of Spirax-Monnier international compressed

More information

Description Supply pressure Pressure range Connection Device Page max. bar bar thread

Description Supply pressure Pressure range Connection Device Page max. bar bar thread Pressure Regulators Supply pressure Pressure range onnection Device Page max. bar bar thread Maxi -Series, robust, interlockable 1 0. 1.8 / 17 G¼ - G1 R0, R1.0 made of plastic, also for liquids 1,5 0 4

More information

Directional Control Valves Series VA13 and VA15 3- and 5-port valves, G1/8

Directional Control Valves Series VA13 and VA15 3- and 5-port valves, G1/8 Directional Control Valves Series VA13 and VA15 3- and 5-port valves, G1/8 Catalogue 9127003472GB-ul VA13 and VA15 Directional Control Valves Robust 3- and 5-port valves with brass bodies and stainless

More information

C 0G 00 N/US

C 0G 00 N/US G, GP, G, GP In-line flow regulators (block form) Uni-directional Ø /... / inch, Ø 4... mm High flow performance In-line or panel mounting Adjustment can be locked aptive regulator needle will not blow

More information

Components for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly.

Components for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly. Components preparation and pressure adjustment ABP Overview ABP is a component that enables boosting by s only up to twice primary pressure (.0MPa max.) in combination with using air tank but not using

More information

MUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5.

MUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5. Installation Instructions manual MUELLER table of contents PAGE A-20814 Wall Type General Information 2 Technical Data/ Dimensions Installation 4-5 Maintenance 6 Parts 7 Indicator Post! WARNING: 1. Read

More information

Hand Valve Series. Push-In Fitting Type Shut-off Valve (Residual Pressure Release Valve) Control Open/Close for Air Supply.

Hand Valve Series. Push-In Fitting Type Shut-off Valve (Residual Pressure Release Valve) Control Open/Close for Air Supply. http://www.pisco.co.jp VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Shut-off Valve (Residual Pressure Release Valve) Hand Valve Series 556 Control Open/Close for Air Supply. Release Residual

More information

IP2M, IP2AM and IP2DM Monnier International Compressed Air Filter/ Regulators

IP2M, IP2AM and IP2DM Monnier International Compressed Air Filter/ Regulators L ocal regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification

More information

Pressure regulators Manually operated Fine setting valves. Brochure

Pressure regulators Manually operated Fine setting valves. Brochure Pressure regulators Manually operated s Brochure Pressure regulators Manually operated s Qn = 9 l/min Actuating element: Push button Internal thread Poppet valve Qn = 9 l/min Actuating element: Push button

More information

INSTALLATION INSTRUCTIONS. CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION

INSTALLATION INSTRUCTIONS. CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION INSTALLATION INSTRUCTIONS CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION The CVS Controls 67CFR Filter regulator is a pressure reducing supply regulator typically used for pneumatic

More information

THE MF-400 SERIES. Operating and Service Manual. Series includes all variants of MF-400/401

THE MF-400 SERIES. Operating and Service Manual. Series includes all variants of MF-400/401 THE MF-400 SERIES Operating and Service Manual Series includes all variants of MF-400/401 Issue A October 2013 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 4. Special

More information

THE HF-300 SERIES. Operating and Service Manual. Series includes all variants of HF-300/301

THE HF-300 SERIES. Operating and Service Manual. Series includes all variants of HF-300/301 THE HF-300 SERIES Operating and Service Manual Series includes all variants of HF-300/301 Issue A July 2015 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 3.1. Spring Loaded...

More information

250 (9.84) 170 (6.69) 225 (8.85) 75 (2.95) 300 (11.81)

250 (9.84) 170 (6.69) 225 (8.85) 75 (2.95) 300 (11.81) Air bellows, single acting Ø... / inch Suitable for applications on rail vehicels Almost frictionless operation No maintenance or lubrication Weather/corrosion resistant metal parts Approvals for fire

More information

EXH. Specifications. Descriptions. Min. working pressure MPa

EXH. Specifications. Descriptions. Min. working pressure MPa Functional explanation Primary pressure flowed from passes through check valve on side, and flows in chamber A and B. Primary pressure also passes through pressure adjustment section and switching valve,

More information

2 in. 18 Gauge Brad Nailer. User manual

2 in. 18 Gauge Brad Nailer. User manual 8504342 2 in. 18 Gauge Brad Nailer User manual Technical Data Capacity....100pcs Nail length... 15-50mm( 5/8-2 ) Fastener size....18gauge (1.25 1.00mm) Operation pressure 70-110PSI(4.8-7.5bar) Air inlet....1/4

More information

accidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS

accidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS 18 GAUGE 1-1/4 INCH BRAD NAILER Model: 7611 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry.

More information

PRESSURE REDUCING (AND CHECK) VALVES RT/RG RCT/RCG. -03/06/10 (3/8, 3/4, 1-1/4) Threaded Connections / Sub-plate Mounting

PRESSURE REDUCING (AND CHECK) VALVES RT/RG RCT/RCG. -03/06/10 (3/8, 3/4, 1-1/4) Threaded Connections / Sub-plate Mounting REDUING (ND HEK) VLVES RT/RG RT/RG -3// (3/8, 3/, -/) Threaded onnections / Mounting Up to MPa (5 PSI), 5 L /m in (3 U.S.GPM) Pub. E-3 Pressure Reducing Valves Pressure reducing valves are used to set

More information

MUELLER A A Non-Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3.

MUELLER A A Non-Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3. Installation Instructions manual MUELLER table of contents PAGE A-20808 General Information 2 Technical Data 3 Dimensions 4 A-20809 Non-Adjustable Installation 5-6 Parts 7 Maintenance 8 Vertical Indicator

More information

MUELLER. Mega-Lite Drilling Machine. Reliable Connections. table of contents PAGE. Equipment 2. Operating Instructions 3-4. Parts Information 5

MUELLER. Mega-Lite Drilling Machine. Reliable Connections. table of contents PAGE. Equipment 2. Operating Instructions 3-4. Parts Information 5 operating Instructions manual MUELLER Mega-Lite Drilling Machine table of contents PAGE Equipment 2 Operating Instructions 3-4 Parts Information 5 Travel Charts 6-11! WARNING: 1. Read and follow instructions

More information

SB 52. Spare parts list. Hydraulic breakers. SB 52 s/n BES Construction Tools PC AB No j

SB 52. Spare parts list. Hydraulic breakers. SB 52 s/n BES Construction Tools PC AB No j SB 52 Spare parts list Hydraulic breakers SB 52 s/n BES043707 2018 Construction Tools PC AB No. 9800069301j 2018-01 General information This spare parts list applies to the following: Part number 8460030010

More information

Calibrated or locked versions available. TREATMENT > Series MD regulators GENERAL DATA. New

Calibrated or locked versions available. TREATMENT > Series MD regulators GENERAL DATA. New > Series MD regulators Series MD pressure regulators New Ports with interchangeable cartridges: threaded (1/8, 1/4, /8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm Versions: single,

More information

Go to Table of Contents. Ball and Plug Valves

Go to Table of Contents. Ball and Plug Valves Ball and Plug s July 2014 Series s Parker series manually, pneumatically and electrically actuated two-way and three-way ball valves are designed for 1/4 and 1/2 turn media shutoff or switching applications

More information

61 Series Pilots for Pilot-Operated Pressure Reducing Regulators

61 Series Pilots for Pilot-Operated Pressure Reducing Regulators 61 Series Pilots for Pilot-Operated Pressure Reducing Regulators June 2011 Introduction 61 Series pilots are used with Types 1098-EGR and EZL pressure reducing regulators. These pilots can also be integrally

More information

Model range*1) Switching pressure difference

Model range*1) Switching pressure difference Pneumatic pressure switch electromechanical actuated -...00 bar, G/2 Microswitch with gold plated contacts Intrinsically safe operation Electrical connection: connector acc. to IN EN 7530-803 (form A)

More information

Pressure-Relief Cartridge Valve, Size 4

Pressure-Relief Cartridge Valve, Size 4 Pressure-Relief Cartridge Valve, Size 4 Q max = 30 l/min, p max = 420 bar Seated design, direct acting, with mechanical operation Compact construction for cavity type AL 3/4-16 UNF High flow rates 7 pressure

More information

SB 152. Spare parts list. Hydraulic breakers. SB 152 s/n BES Construction Tools PC AB No

SB 152. Spare parts list. Hydraulic breakers. SB 152 s/n BES Construction Tools PC AB No SB 152 Spare parts list Hydraulic breakers SB 152 s/n BES043707 2018 Construction Tools PC AB No. 9800041001 2018-01 General information This spare parts list applies to the following: Part number 8460030040

More information

Thin pressure gauge. G401-W Series. Symbol Descriptions. A Connection A A. B Pressure display [MPa] P04 0 to 0.4MPa P10 0 to 1.

Thin pressure gauge. G401-W Series. Symbol Descriptions. A Connection A A. B Pressure display [MPa] P04 0 to 0.4MPa P10 0 to 1. Thin pressure gauge G401-W Series Thin, compact design ideal for incorporating devices. Suitable for filter regulator, regulator, and pressure switch (P4000-W). onnection: O ring seal, set screw G401-W

More information

Type 4708 Supply Pressure Regulator

Type 4708 Supply Pressure Regulator Type 478 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to.6 bar ( to 4 psi) or. to 6 bar (8 to

More information

Models 106-RF / 206-RF Rate of Flow Control Valve

Models 106-RF / 206-RF Rate of Flow Control Valve Rate of Valve KEY FEATURES Accurately limits low to a pre-set maximum Easily adjustable low limit Paddle-style oriice plate included Optional oriice plate housing 106-RF Globe Product Overview The 106-RF

More information

Flow control valves Series RFU - RFO 2/

Flow control valves Series RFU - RFO 2/ CATALOGUE > Release 8.5 > Valves Series RFU - RFO Flow control valves Series RFU - RFO Unidirectional and bidirectional flow control valves Ports: M5, G1/8, G1/4, G3/8 and G1/ Nominal diameter: M5 = 1,5

More information

Pilot Operated Check Valves

Pilot Operated Check Valves Pilot Operated Check Valves These check valves allow flow in one direction and prevent flow in the reverse direction, until operated by pilot pressure to allow free reverse flow. The specified cracking

More information

Valves to ISO 5599/1 standards pilot and solenoid actuated size

Valves to ISO 5599/1 standards pilot and solenoid actuated size Series UDS ISO pilot and solenoid actuated size 1 - - 3 DESCRIPTION Valves series "UDS ISO" are produced in the and pneumatic functions according to the interface to ISO 5599/1 standards and they are mounted

More information

seriesuds ISO Valves to ISO 5599/1 standard

seriesuds ISO Valves to ISO 5599/1 standard seriesuds ISO Valves to ISO 5599/1 standard pilot and solenoid actuated sizes 1 - - 3 DESCRIPTION Valves series UDS ISO are produced in the and pneumatic functions according to the interface to ISO 5599/1

More information

VPPC02, VPPC08 3-way proportional pressure control valve, electronic closed loop control

VPPC02, VPPC08 3-way proportional pressure control valve, electronic closed loop control VPPC, VPPC -ay proportional pressure control valve, > > Nominal diameter,, flange version G/ > > Visual function display (optional) > > Compact and lighteight design > > Field bus capable as part of a

More information

Avenger Model 33M Installation & Operation Instructions

Avenger Model 33M Installation & Operation Instructions Avenger Model 33M Installation & Operation Instructions Manufacturing Contact Information A+ Corporation, LLC Call for expert product application assistance: 41041 Black Bayou Rd. Gonzales, LA 70737 Phone:

More information

accidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS

accidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS 18 GAUGE 2 INCH BRAD NAILER Model: 7555 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry.

More information

Mounting and Operating Instructions EB 8546 EN. Supply Pressure Regulator Type Fig. 1 Supply pressure regulators

Mounting and Operating Instructions EB 8546 EN. Supply Pressure Regulator Type Fig. 1 Supply pressure regulators Supply Pressure Regulator Type 4708 Type 4708-5352 on Type 3730 Positioner Type 4708-52 with filter receptacle Type 4708-6252 on Type 3372 ctuator Fig. Supply pressure regulators Mounting and Operating

More information

Position locking powerful chuck. CKL2-*-HC Series CKL2-40CS-HC CKL2-50CS-HC CKL2-63CS-HC CKL2-80CS-HC Compressed air to

Position locking powerful chuck. CKL2-*-HC Series CKL2-40CS-HC CKL2-50CS-HC CKL2-63CS-HC CKL2-80CS-HC Compressed air to RV* FH1 G G B FH Specifications Descriptions Cylinder bore size Working fluid Max. working pressure Min. working pressure Ambient temperature Port size Operational stroke length Rod diameter Capacity of

More information

B-Too Drilling and Tapping Machine

B-Too Drilling and Tapping Machine Material Specifications Powered by hand or with Ridgid 690 (TM-29) High strength, modular aluminum and steel components Inserts any 3 /4" to 1" corporation stop under pressure Extracts threaded corporation

More information

4/2 way Pneumatic Solenoid Valve

4/2 way Pneumatic Solenoid Valve 4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11

More information

CALEFFI. Ball zone valves. series /03 GB

CALEFFI. Ball zone valves. series /03 GB all zone valves series cert. n ISO / Function Zone valves are used to automatically shut-off the flow of carrier fluid distributed to a system. Specifically: -In central heating systems, they support the

More information

Directional Controls

Directional Controls Vickers Directional Controls Directional Control Valves DG3V-3-*-60 Hydraulic Operated DG17V-3-*-60 Lever Operated DG18V-3-*-60 Air Operated DG20V-3-*-60 Cam Operated DG21V-3-*-60 Plunger Operated CETOP

More information

Regulator: Modular Type with Back flow Mechanism. AR30K to 60K. Body size. Port size 1/4 3/8 1/2 3/4 AR40 AR50 3/4 1/2

Regulator: Modular Type with Back flow Mechanism. AR30K to 60K. Body size. Port size 1/4 3/8 1/2 3/4 AR40 AR50 3/4 1/2 Regulator: Modular Type with ack flow Mechanism R3 to 6 How to Order Regulator with a built-in mechanism that ensures a quick release of the outlet air pressure (built-in check valve with back flow mechanism).

More information

Pilot Check Valve: Metal Body Type

Pilot Check Valve: Metal Body Type INFORMATION Pilot Check Valve: Metal Body Type The use of a metal body improves strength and environmental resistance. Temporary intermediate stops are possible. *1 *1 Precise intermediate stops are not

More information

series UDS ISO to ISO 5599/1 standard pilot and solenoid actuated sizes DESCRIPTION TECHNICAL DATA MATERIALS SPARE PARTS

series UDS ISO to ISO 5599/1 standard pilot and solenoid actuated sizes DESCRIPTION TECHNICAL DATA MATERIALS SPARE PARTS series UDS ISO Valves to ISO 5599/1 standard pilot and solenoid actuated sizes 1 - - 3 DESCRIPTION Valves series UDS ISO are produced in the and functions according to the interface to ISO 5599/1 standard

More information

1301 Series High-Pressure Regulators

1301 Series High-Pressure Regulators Instruction Manual Form 1111 Types 1301F and 1301G March 2013 1301 Series High-Pressure Regulators! WARNING Failure to follow these instructions or to properly install and maintain this equipment could

More information

Float Operated Level Controllers

Float Operated Level Controllers CONTENTS Float Operated Level Controllers IM0015 Nov. 2014 PAGE Introduction 1 Scope 1 Description 1 Specification 1 Control Installation 2 INTRODUCTION Side Mount Back Mount Prior to installing, the instructions

More information

Coiling Tube with Twist-Proof Fitting

Coiling Tube with Twist-Proof Fitting http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Anti-Twisting Coiling Tube for Air Tool Coiling Tube with Twist-Proof Fitting 306 Avoid Twisted Tube Problem

More information

Type PRX/120, PRX/125, PRX-AP/120, PRX-AP/125, PRX/181, PRX/182, PRX/131 and PRX-AP/131 Pilots

Type PRX/120, PRX/125, PRX-AP/120, PRX-AP/125, PRX/181, PRX/182, PRX/131 and PRX-AP/131 Pilots Instruction Manual 0006EN-PRX-IM PRX Series July 2008 - Rev. 00 Type PRX/120, PRX/125, PRX-P/120, PRX-P/125, PRX/1, PRX/2, PRX/131 and PRX-P/131 Pilots summary Introduction... 1 Characteristics... 1 Labelling...

More information

MUELLER. A A Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3.

MUELLER. A A Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3. Installation Instructions manual MUELLER table of contents PAGE A-20806 A-20807 Adjustable General Information 2 Technical Data 3 Dimensions 4 Installation 5-6 Parts 7 Maintenance 8 Vertical Indicator

More information

Standard Specifications

Standard Specifications NARM, 2 Ways of Connection Small Size Pressure Gauge ø5mm Reverse flow function available on the standard model Space Saving -B2 NARM-6A-NG Standard Specifications Fluid Proof pressure psig (MPa) Max.

More information

Installation, Operation and Maintenance Manual for Back Pressure Regulator

Installation, Operation and Maintenance Manual for Back Pressure Regulator Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN

More information

DP Spare parts list. Demolition pulverizer. DP 2800 s/n DEQ Construction Tools GmbH No

DP Spare parts list. Demolition pulverizer. DP 2800 s/n DEQ Construction Tools GmbH No DP 2800 Spare parts list Demolition pulverizer DP 2800 s/n DEQ139266-2018 Construction Tools GmbH No. 3390719501 2018-01-01 General information This spare parts list applies to the following: Part number

More information

How to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø

How to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note

More information

Heavy Metal Stainless Steel Valves

Heavy Metal Stainless Steel Valves 2.10 page 187 2.10 Heavy Metal Stainless Steel Valves Selected models are available for explosion hazardous environment. They are ATEX-Ex certified. For detailed information refer to chapter 2.12. 316

More information

ALF400 to 900, ALT-5/-9

ALF400 to 900, ALT-5/-9 uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa 0. MPa.0 MPa (Note

More information

Product Manual. Description. Specifications. CVS Type 1301F and CVS Type 1301G Regulator. Introduction

Product Manual. Description. Specifications. CVS Type 1301F and CVS Type 1301G Regulator. Introduction Product Manual CVS Type 1301F and CVS Type 1301G Regulator Introduction This CVS Controls product manual includes instructions for the installation, adjustment, maintenance and parts ordering of the CVS

More information

VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES 10

VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES 10 / ED VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES OPERATING PRINCIPLE The VPPL are variable displacement axial-piston pumps with variable swash plate, suitable for applications

More information

Flow and check valves Logic valves series 551. Brochure

Flow and check valves Logic valves series 551. Brochure Flow and check valves Logic valves series 551 Brochure 2 Flow and check valves Logic valves series 551 3/2-directional valve, low pressure operated Qn = 2-120 l/min 3 3/2-directional valve, Qn = 120 l/min

More information

INSTRUMENTATION VALVES

INSTRUMENTATION VALVES INSTRUMENTATION VALVES INSTRUMENTATION BALL VALVES INTEGRAL-BONNET NEEDLE VALVES TOGGLE VALVES (TG Series) CHECK VALVES (CHV Series: For General Industry) RELIEF VALVES (RVL/RVH Series) INSTRUMENTATION

More information

Float valves Types SV 4, SV 5 and SV 6

Float valves Types SV 4, SV 5 and SV 6 Data sheet Float valves Types SV 4, SV 5 and SV 6 SV 4-6 are for use on the low pressure side as modulating liquid level regulators in refrigeration, freezing and air conditioning systems with ammonia

More information

Type 4708 Supply Pressure Regulator

Type 4708 Supply Pressure Regulator Type 478 Pressure Regulator Application pressure regulators used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to. bar ( to 4 psi). to bar (8 to 9 psi)

More information

EXCELON QUIKCLAMP SYSTEM Pressure relief valves V72G, V74G - G1/4... G 3/4

EXCELON QUIKCLAMP SYSTEM Pressure relief valves V72G, V74G - G1/4... G 3/4 V7 V7 EXCELO QUIKCLMP SYSTEM Pressure relief valves V7, V7-1/... 3/ Excelon design allows in-line installation or modular installation with other Excelon products Push to lock adjusting knob with tamper

More information

High-Purity. Ball Valves

High-Purity. Ball Valves High-Purity s Components MANUFACTURING ASSEMBLY TESTING HP High-Purity s CFOS Applications Cost-effective systems where cleaning for oxygen-grade services are required, such as: Clean-Dry Air (CDA), Oil-Free

More information

Cable entries. Contents. Cable entries. Cable entries Introduction L.2 L.1. Standard cable glands - Plastic L.5. Standard cable glands - Brass L.

Cable entries. Contents. Cable entries. Cable entries Introduction L.2 L.1. Standard cable glands - Plastic L.5. Standard cable glands - Brass L. Contents Introduction.2 Standard cable glands - Plastic.5 Standard cable glands - Brass.7 EMC cable glands.14 Standard cable glands - Stainless steel.16 Cable glands for Ex applications - Brass.17 Adaptors.18

More information

1 0,1 0,1-70 0, , , , Cylinder bore <

1 0,1 0,1-70 0, , , , Cylinder bore < Working medium, air quality Working medium: Dry, filtered compressed air to ISO 8573-1 class 3.4.3. Recommended air quality for valves For best possible service life and trouble free operation, ISO 8573-1

More information

KM/ Stainless steel air bellows Single acting Ø 220 to 400 mm

KM/ Stainless steel air bellows Single acting Ø 220 to 400 mm KM/ Stainless steel air bellows Single acting Ø to mm Stainless steel end plates Frictionless operation No maintenance or lubrication Ideal for short stroke, high-force applications High isolation level

More information

Operation Manual Air Saver Unit ASV5000 Series

Operation Manual Air Saver Unit ASV5000 Series 9IM-V066-b Operation Manual Air Saver Unit ASV5000 Series Thank you for your choice of Kuroda Pneumatics LTDs product on this time. Please read this operation manual carefully and use the product correctly.

More information

Propor tional Re lief Valve s

Propor tional Re lief Valve s www.swagelok.com Propor tional Re lief Valve s R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections Proportional Relief Valves

More information

Type ACE97 Pad-Depad Valve

Type ACE97 Pad-Depad Valve Instruction Manual Form 5665 Type ACE97 November 2011 Type ACE97 Pad-Depad Valve DEPAD PILOT VALVE DEPAD MAIN VALVE W8161 ACTUATOR VENT GAS INLET PAD VALVE TO TANK Figure 1. Type ACE97 Pad-Depad Valve

More information

Pressure Dump Valve Service Kit for Series 3000 Units

Pressure Dump Valve Service Kit for Series 3000 Units Instruction Sheet Pressure Dump Valve Service Kit for Series 000 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00, 400, 500, and 700 applicator

More information

Direct Operated Precision Regulator Modular Style. Standard Specifications

Direct Operated Precision Regulator Modular Style. Standard Specifications 1 Direct Operated Precision Regulator Modular Style Series P3 Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8) 258-92-www.stevenengineering.com

More information

MUELLER GAS. No-Blo Operations Using D-5. Drilling Machine. Reliable Connections. General Information 2

MUELLER GAS. No-Blo Operations Using D-5. Drilling Machine. Reliable Connections. General Information 2 operating Instructions manual MUELLER GAS TAble of contents PAGE No-Blo Operations Using D-5 General Information 2 Installing No-Blo Service Tees, Service Stop Tees and Curb Stop Tees 3-8 Reconditioning

More information