Pneumatic Function Fittings Metric & Inch

Transcription

1 Metric & nch Sensor Fitting Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage Simpler pneumatic systems liminates need for electrical reed switches Technical ata Medium: ompressed air Operating : ylinder pressure (Pc) bar max Sensor supply pressure - bar Sensor switch pressure. bar typ. Operating Temperature: to +8 ody Ports mm Push-in Fittings Push-in Fittings 8, SPP anjo olt 8, NPTF anjo olt Tube s mm O/ O/ Tubing Types: Nylon or, polyurethane and other plasticised or unplasticised tubing which conforms to the tolerances specified in S 9, Part, 97, light and normal duty, N 778, N 7, NF 9- Ordering nformation To order, quote appropriate product number from the tables on the following pages. Product numbering system is designed to make identification and selection simple: Series Number Type Shape / Tube Tube / Materials elrin and plastic parts lass filled nylon Nickel plated brass collet Nitrile and polyurethane elastomeric parts Nickel plated brass banjo bolt /97 N/L 9...

2 Pneumatic Function Fittings Sensor Fitting- PF x SPP anjo olt F Product F number O/ thread thread /F tube SPP SPP 8 8" 8,, 8" 9,,,,9 8 ", 7, " 9,,, 9, 9 This sensor fitting produces an end of stroke signal when exhaust back pressure in a cylinder decays below a set value. t should be mounted directly on the cylinder and can be used with a flow control device mounted into the top port. t is recommended that the sensor supply pressure to port be the same as the nominal working pressure of the cylinder. Sensor Fitting- PF x NPTF anjo olt F Product F number O/ thread thread /F tube NPTF NPTF 8 " 8" 8,, 8" 9, 9,, 8, 9 " 8 " ", 7, " 9,,,,7 " This sensor fitting produces an end of stroke signal when exhaust back pressure in a cylinder decays below a set value. t should be mounted directly on the cylinder and can be used with a flow control device mounted into the top port. t is recommended that the sensor supply pressure to port be the same as the nominal working pressure of the cylinder. Warning These products are intended for use in industrial compressed air systems only. o not use these products where pressures and temperatures can exceed those listed under Technical ata. efore using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult Norgren. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products where applicable. N/L 9... /97

3 Metric & nch Pilot Operated heck Valve (locking Fitting) esigned for direct cylinder mounting Safer pneumatic systems Push-in or threaded ports available ompact banjo design Technical ata Medium: ompressed air Operating : - bar Operating Temperature: to +8 nlet Port:,, 8,, mm Push-in Fittings, 8, Push-in Fittings 8,, 8, NPTF ed Ports Outlet Port: 8,, 8, SPP 8,, 8, NPTF Ordering nformation To order, quote appropriate product number from the tables on the following pages. Product numbering system is designed to make identification and selection simple: Pilot Port: M - UNF Series Number Type Shape / Tube Tube / Tube s,, 8,, mm O/, 8, O/ Tubing Types: Nylon or, polyurethane and other plasticised or unplasticised tubing which conforms to the tolerances specified in S 9, Part, 97, light and normal duty, N 778, N 7, NF 9- Materials Nickel plated brass body Nickel plated brass collet Plastic sealing washer Nitrile and polyurethane elastomeric parts Zinc plated brass banjo bolts 7/98 N/L 9...

4 Pneumatic Function Fittings Pilot Operated heck Valve (locking Fitting) - PF x SPP thread Product SQ number O/ thread tube SPP 8 8",,, 9,8 M 8 8",,, 9,8 M 8 ", 8, 7,,8 M 88 8 ", 8, 7,,8 M " 8,,,8 9, M 8 8",7,,8 9, M 8 " 9,7, 7,8, M ) nlet Port ) Outlet Port ) Pilot Port Note: For mounting in pairs on a cylinder Pilot Operated heck Valve (locking Fitting) - SPP threaded port x SPP thread Product ody SQ number port thread SPP 88 8 SPP 8 7,,, 9,8 M 88 8 SPP, 8, 7,,8 M 88 SPP, 8, 7,,8 M 88 8 SPP 8 7,,,8 9, M 88 SPP,, 7,8, M ) nlet Port ) Outlet Port ) Pilot Port Note: For mounting in pairs on a cylinder Pilot Operated heck Valve (locking Fitting) - PF x NPTF thread Product ody SQ number port thread NPTF 8 PF 8,,, 9,8 - UNF 8 PF, 8, 7,,8 - UNF 8 8PF 8,7, 7, 9, - UNF 78 PF 9,7, 7, - UNF ) nlet Port ) Outlet Port ) Pilot Port Note: For mounting in pairs on a cylinder Pilot Operated heck Valve (locking Fitting) - NPTF threaded port x NPTF thread Product ody SQ number port thread NPTF 88 8NPTF 8,,, 9,8 - UNF 88 NPTF 9, 8, 7,,8 - UNF 88 8NPTF 8,, 7, 9, - UNF 88 NPTF 9,, 7, - UNF ) nlet Port ) Outlet Port ) Pilot Port Note: For mounting in pairs on a cylinder N/L /98

5 uidelines for Typical nstallation to control valve pilot signal The pilot operated check valve should be mounted directly onto a cylinder. This installation minimises the volume of air trapped in the system and gives the fastest blocking response. Pilot haracteristics These charateristics were measured with pressure on port (secondary pressure), but no pressure on port. The pilot pressure was gradually increased until the value opened. Pilot pressure (bar) 7 8 (bar) Outlet Port /8 Pilot pressure (bar) 7 8 (bar) Outlet Port / 7/98 N/L 9...

6 Pilot pressure (bar) 7 8 (bar) Outlet Port /8 Pilot pressure (bar) Note: The pilot signal pressure should be an on/off signal, rather than one that is allowed to decay slowly. 7 8 (bar) Outlet Port / Flow hart Flow at bar Flow (/m) 8" 89 " 7 8", ",9 Warning These products are intended for use in industrial compressed air systems only. o not use these products where pressures and temperatures can exceed those listed under Technical ata. efore using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult Norgren. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products where applicable. 7/98 N/L 9...

7 Metric & nch Reducing Fitting ompact units System running cost savings by optimising cylinder pressure esigned for mounting on valves Push-in or threaded ports available Relief feature to protect against over pressure Technical ata Medium: ompressed air Operating : Primary pressure - bar maximum -8 bar maximum Operating Temperature: to +8 Outlet Port:,, 8, mm Push-in Fittings,,, 8, Push-in Fittings 8,, 8, NPTF ed Ports nlet Port: 8,, 8, SPP 8,, 8, NPTF Tube s,, 8, mm O/,,, 8, O/ Tubing Types: Nylon or, polyurethane and other plasticised or unplasticised tubing which conforms to the tolerances specified in S 9, Part, 97, light and normal duty, N 778, N 7, NF 9- Materials Nickel plated brass body Nickel plated brass collet Plastic sealing washer Nitrile and polyurethane elastomeric parts Zinc plated brass banjo bolt Ordering nformation To order, quote appropriate product number from the tables on the following pages. Product numbering system is designed to make identification and selection simple: Series Number Type Shape / Tube Tube / 7/98 N/L 9...

8 Pneumatic Function Fittings Reducing Fitting - PF x SPP thread Product SQ number O/ thread (max) /F tube SPP 8 8", 7, 7, 9,8 8 ", 8 7,, ", 8 7,, " 8, 88,8 9, 8 8",7 88,8 9, ) nlet Port ) Outlet Port Note: For mounting in ports & of a control valve Reducing Fitting - SPP threaded port to SPP thread Product SQ number ody thread (max) /F Port SPP 88 8" SPP 8" 7, 7, 7, 9,8 88 " SPP ", 8, 7,,8 88 8" SPP 8" 7, 88,,8 9, 88 " SPP ", 89, 7 9,, ) nlet Port ) Outlet Port Note: For mounting in ports & of a control valve Reducing Fitting - PF x NPTF thread Product SQ number O/ thread (max) /F tube NPTF 8 PF 8, 7, 7 9,8 8 PF 8, 7, 7 9,8 8 PF, 8, 7,8 8 PF, 8, 7,8 8 PF 8 8, 88, PF 8,7 88, 9 78 PF 9,7 9, 7 ) nlet Port ) Outlet Port Note: For mounting in ports & of a control valve Reducing Fitting - NPTF threaded port to NPTF thread Product SQ number ody thread (max) /F Port NPTF 88 8 NPTF 8, 7, 7 9,8 88 NPTF 9, 8, 7, NPTF 8, 88, 9, 88 NPTF 9, 9, 7, ) nlet Port ) Outlet Port Note: For mounting in ports & of a control valve N/L /98

9 uidelines for Typical nstallation P P The regulator is designed to be mounted in the cylinder connection of a control valve. The adjustment screw is turned to set the operating pressure, clockwise rotation causes the operating pressure to increase, and an anticlockwise rotation causes the pressure to decrease. The unit is designed to be self relieving so that, if the pressure rises above the required level, excess pressure is automatically vented. Flow haracteristics nch Version Flow (SFM) 8 Flow (SFM) nlet / NPTF- bar nlet /8 & / NPTF- bar / NPTF- bar /8 & / NPTF- bar / NPTF- bar /8 & / NPTF- bar 7/98 N/L 9...

10 Flow haracteristics Metric Version 8 Flow (l/min) 8 Flow (l/min) nlet /8 - bar nlet / - bar /8 - bar / - bar /8 - bar / - bar Flow (l/min) nlet /8 & / - bar /8 & / - bar /8 & / - bar Warning These products are intended for use in industrial compressed air systems only. o not use these products where pressures and temperatures can exceed those listed under Technical ata. efore using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult Norgren. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products where applicable. 7/98 N/L 9...

11 Metric Pilot Operated heck Valve (locking Fitting) Very compact units Positive tube anchorage Safer pneumatic systems Technical ata Medium: ompressed air Operating : - bar Operating Temperature: to +8 nlet Port: 8,, 8, SPP Outlet Port: 8,, 8, SPP Signal Port: M Tubing Types: Nylon or, polyurethane and other plasticised or unplasticised tubing which conforms to the tolerances specified in S 9, Part, 97, light and normal duty, N 778, N 7, NF 9- Materials Nickel plated brass body Plastic sealing washer Nitrile and polyurethane elastomeric parts Zinc plated brass banjo bolts Ordering nformation To order, quote appropriate product number from the tables on the following pages. Product numbering system is designed to make identification and selection simple: Series Number Type Shape / Tube Tube / /99 X 9...

12 ˇˇˇˇˇˇˇˇˇˇˇˇˇ Pilot Operated heck Valve (locking Fitting) - Female to male SPP thread Product ody SQ number port thread NPTF 88 SPP 7,,, 9,8 M 88 SPP, 8, 7,,8 M 88 SPP, 8, 7,,8 M 88 8SPP 8 7,,,8 9, M 88 SPP,, 7,8, M ) nlet Port ) Outlet Port ) Signal Port Note: For mounting in pairs on a cylinder Warning These products are intended for use in industrial compressed air systems only. o not use these products where pressures and temperatures can exceed those listed under Technical ata. efore using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult Norgren. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products where applicable. ˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇ X 9... /99 ˇˇˇˇˇˇˇˇˇˇˇˇˇ

13 Metric & nch Reducing Fitting ompact units System running cost savings by optimising cylinder pressure esigned for mounting on valves Push-in or threaded ports available Relief feature to protect against over pressure Technical ata Medium: ompressed air Operating : Primary pressure - bar maximum -8 bar maximum Operating Temperature: to +8 Outlet Port:,, 8, mm Push-in Fittings,,, 8, Push-in Fittings 8,, 8, NPTF ed Ports nlet Port: 8,, 8, SPP 8,, 8, NPTF Tube s,, 8, mm O/,,, 8, O/ Tubing Types: Nylon or, polyurethane and other plasticised or unplasticised tubing which conforms to the tolerances specified in S 9, Part, 97, light and normal duty, N 778, N 7, NF 9- Materials Nickel plated brass body Nickel plated brass collet Plastic sealing washer Nitrile and polyurethane elastomeric parts Zinc plated brass banjo bolt Ordering nformation To order, quote appropriate product number from the tables on the following pages. Product numbering system is designed to make identification and selection simple: Series Number Type Shape / Tube Tube / 7/98 N/L 9...

14 Pneumatic Function Fittings Reducing Fitting - PF x SPP thread Product SQ number O/ thread (max) /F tube SPP 8 8", 7, 7, 9,8 8 ", 8 7,, ", 8 7,, " 8, 88,8 9, 8 8",7 88,8 9, ) nlet Port ) Outlet Port Note: For mounting in ports & of a control valve Reducing Fitting - SPP threaded port to SPP thread Product SQ number ody thread (max) /F Port SPP 88 8" SPP 8" 7, 7, 7, 9,8 88 " SPP ", 8, 7,,8 88 8" SPP 8" 7, 88,,8 9, 88 " SPP ", 89, 7 9,, ) nlet Port ) Outlet Port Note: For mounting in ports & of a control valve Reducing Fitting - PF x NPTF thread Product SQ number O/ thread (max) /F tube NPTF 8 PF 8, 7, 7 9,8 8 PF 8, 7, 7 9,8 8 PF, 8, 7,8 8 PF, 8, 7,8 8 PF 8 8, 88, PF 8,7 88, 9 78 PF 9,7 9, 7 ) nlet Port ) Outlet Port Note: For mounting in ports & of a control valve Reducing Fitting - NPTF threaded port to NPTF thread Product SQ number ody thread (max) /F Port NPTF 88 8 NPTF 8, 7, 7 9,8 88 NPTF 9, 8, 7, NPTF 8, 88, 9, 88 NPTF 9, 9, 7, ) nlet Port ) Outlet Port Note: For mounting in ports & of a control valve N/L /98

15 uidelines for Typical nstallation P P The regulator is designed to be mounted in the cylinder connection of a control valve. The adjustment screw is turned to set the operating pressure, clockwise rotation causes the operating pressure to increase, and an anticlockwise rotation causes the pressure to decrease. The unit is designed to be self relieving so that, if the pressure rises above the required level, excess pressure is automatically vented. Flow haracteristics nch Version Flow (SFM) 8 Flow (SFM) nlet / NPTF- bar nlet /8 & / NPTF- bar / NPTF- bar /8 & / NPTF- bar / NPTF- bar /8 & / NPTF- bar 7/98 N/L 9...

16 Flow haracteristics Metric Version 8 Flow (l/min) 8 Flow (l/min) nlet /8 - bar nlet / - bar /8 - bar / - bar /8 - bar / - bar Flow (l/min) nlet /8 & / - bar /8 & / - bar /8 & / - bar Warning These products are intended for use in industrial compressed air systems only. o not use these products where pressures and temperatures can exceed those listed under Technical ata. efore using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult Norgren. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products where applicable. 7/98 N/L 9...