Working at Heights Training Checklist (Ontario Version)
|
|
- Marybeth Hutchinson
- 5 years ago
- Views:
Transcription
1 Working at Heights Training Checklist (Ontario Version) The new working at heights training is different from the fall protection training required by Sec. 26.2(1) of the Ontario Construction Projects Regulations in that the training program must be approved by the Ontario Chief Prevention Officer (CPO) as meeting the detailed criteria set out in a document called the Working at Heights Training Program Standard. Specifically, the program must be made up of 2 modules: Module 1: Basic Theory; and Module 2: Practical. Each module is subdivided into chapters containing specific learning objectives. Here s a Checklist you can use to verify that your training provider s program meets all of the CPO s requirements.
2 WORKING AT HEIGHTS TRAINING MODULE 1: WORKING AT HEIGHTS BASIC THEORY A. Rights and Responsibilities for Working at Heights under the Ontario OHS Act [ ] Identify the working at heights roles and responsibilities of the: [ ] Employer [ ] Constructor (if the project has one) [ ] Supplier [ ] Supervisor [ ] Worker [ ] Describe 3 worker rights with regards to working at heights [ ] Explain how a worker would take steps to exercise each of these rights [ ] Explain that all workers have a duty to report to their supervisor or employer any fall hazard or defect in fall prevention/protection equipment of which they re aware and which may endanger themselves or another worker [ ] Explain that an employer may not threaten to fire or dismiss workers for exercising their health and safety rights regarding working safely at heights, or for asking their employer or supervisor to do what the OHS Act requires [ ] Explain that the MOL enforces the OHS Act and its regulations, and that MOL inspectors may make orders, requirements and may initiate prosecutions for non-compliance with working safely at heights rules
3 [ ] Explain the types of help and resources available through the MOL s website [ ] Explain the purpose of the MOL s telephone line B. Identification of the Hazards of Working at Heights [ ] Recognize hazards of working at heights [ ] Recognize other hazards to which workers at risk of falling from heights are exposed, i.e., falling into water, machinery, electrical equipment, hazardous substances or objects [ ] List typical accidents and injuries related to working at heights [ ] Identify the frequency, severity and consequences of injuries and fatalities due to falls from heights (morale, family, society, reputation) [ ] Explain the role of safe work plans and procedures in identifying hazards of falling from heights C. Elimination or Control of Working at Heights Hazards [ ] Explain the hierarchy of controls for working at heights, such as elimination, isolation, engineering, substitution, administrative or PPE [ ] Using realistic workplace scenarios for barriers, access equipment, positioning equipment and PPE, use the hierarchy of controls to choose the preferred method of working safely at heights [ ] Explain the limitations of PPE
4 D. Warning Methods & Physical Barriers [ ] Describe the types of warning methods (signs and bump lines) and their appropriate use [ ] Describe the types of physical barriers (fencing, guardrails, protective coverings), and their appropriate use [ ] Identify the characteristics and appropriate uses of permanent and temporary guard rails [ ] Explain which precautions are necessary when relocating or removing guardrails E. Ladders & Similar Equipment [ ] Identify at least 3 types of portable ladders and similar equipment and the limitations of each [ ] Explain the advantages and disadvantages of ladders and similar equipment for working at heights [ ] Recognize that there are different regulatory requirements for ladders in different sectors and that these requirements may place restrictions on the type of work which may be performed for working at heights from a ladder [ ] Identify and assess situations in which ladders could be used safely for working at heights, and when alternative means of access would be more appropriate [ ] Explain how to properly inspect and care for ladders and similar equipment
5 [ ] Describe how to safely position and use ladders [ ] Explain that may need additional workplace-specific information, instruction or training from their employer if they re asked to use a ladder or similar equipment for working at heights at the workplace F. Personal Fall Protection Equipment [ ] Explain when a travel restraint system, fall restricting system or fall arrest system would be required [ ] Explain the essential components of each sytem [ ] Identify that more extensive training is essential to safely use a travel restraint system, fall restricting system or fall arrest system MODULE 2: WORKING AT HEIGHTS PRACTICAL A. Barriers & Other Fixed Equipment [ ] Identify situations in which bump lines, barriers, guardrails and safety nets would be appropriate [ ] Identify the regulatory requirements (if any) for bump lines, barriers, guardrails and safety nets [ ] Identify the limitations of bump lines, barriers, guardrails and safety nets [ ] Identify the specific requirements for strength and design of temporary guard rails
6 B. Personal Fall Protection Equipment [ ] Discuss the limitations and appropriate use of travel restraint, fall restricting and fall arrest systems [ ] Identify the regulatory requirements (where applicable) for travel restraint, fall restricting and fall arrest systems [ ] Discuss the fundamental components of travel restraint, fall restricting and fall arrest systems [ ] Determine the fall distance to prevent a worker from striking the ground or an object below; [ ] Discuss the force required to deploy a shock absorber [ ] Define and explain the effects on the human body of each of the following: [ ] Bottoming out [ ] The pendulum effect [ ] Suspension trauma; [ ] Describe the steps required for the proper set up, use, maintenance and storage of travel restraint and fall arrest equipment (harness, lanyard, lifeline, rope grab,, snap and grab hooks, carabiners) [ ] Demonstrate the ability to inspect and identify deficiencies in industrystandard personal fall arrest equipment [ ] Demonstrate how to properly don and doff industry-standard personal fall arrest equipment, including harness and lanyard
7 [ ] Describe how to protect horizontal and vertical lifelines while in use [ ] Describe the proper set-up and use of a rope grab for personal fall arrest systems and ladder use [ ] Explain methods of maintaining tie-off to an anchor point at all times when changing anchor points [ ] Describe situations in which they may need additional workplace-specific information, instruction or training by their employer if asked to use fall protection equipment in the workplace C. Anchor Points [ ] Explain what an anchor point is [ ] Discuss the proper location and use of anchor points [ ] Give examples of appropriate and inappropriate anchor points [ ] Explain the consequences of using inappropriate items as anchor points [ ] Illustrate the differences between permanent anchors, temporary fixed supports and existing structural features as anchor points [ ] Discuss the importance of manufacturer s recommendations when installing new anchor points and, if necessary, approval of anchor points by a professional engineer [ ] Explain the importance of asking for information before using new anchor points
8 D. Work Access Equipment & Platforms [ ] Using the hierarchy of controls, identify the different types of equipment that may be available to safely perform different tasks at heights, which may include: [ ] Powered Elevating Work Platforms (PEWPs) [ ] Scaffolds, ladders [ ] Suspended access equipment [ ] Boatswain s chairs [ ] Identify regulatory restrictions and criteria for safe use and positioning of ladders [ ] Give examples of the types of personal fall protection equipment needed to safely work at heights on work access equipment and platforms [ ] Explain that if they re asked to use, work access equipment, platforms or similar equipment in the workplace, they may need additional workplacespecific and/or equipment-specific information, instruction or training E. Rescue Planning [ ] Explain the purpose of a working at heights fall rescue plan [ ] Identify key components of a fall rescue plan [ ] Discuss the roles and responsibilities of employers, supervisors and workers regarding a fall rescue plan and emergency procedures
9 [ ] Explain that each project where workers rely on fall protection equipment (such as PPE and safety nets) must have a site specific rescue plan and that information, instruction or training on the site specific rescue plan is necessary
FALL PROTECTION WORK PLAN (Alstom Power Installation Canada)
FALL PROTECTION WORK PLAN (Alstom Power Installation Canada) Location: Unit: Foreman: Task: Supervisors Ensure: Workers must review and sign this fall protection work plan prior to starting work in an
More informationFall Protection ABC s
Fall Protection ABC s Chris Caron American Safety & Supply, Inc. Fall Protection ABC Itinerary Review types of fall arrest systems Review and discuss ladder safety Discuss the various components of fall
More informationworkplace fatalities involving falls to a lower level. Fall related fatalities make up 16% of workplace fatalities
2013 574 workplace fatalities involving falls to a lower level Fall related fatalities make up 16% of workplace fatalities Bureau of Labor Statistics Passive Fall Prevention Fall Arrest Fall Restraint
More informationThis subject outlines procedures to prevent accidents or injuries to you and others from inappropriate selection and use of fall protection equipment.
Page 1 of 7 REFERENCES Personal Protective Equipment Standards 1.31 PURPOSE This subject outlines procedures to prevent accidents or injuries to you and others from inappropriate selection and use of fall
More informationOverview. Identify fall hazardous areas Describing potential fall hazards How appropriate portable and extension ladders are used
FALL PROTECTION Overview Identify fall hazardous areas Describing potential fall hazards How appropriate portable and extension ladders are used Fall Protection All situations that expose personnel to
More information??????? is committed to providing a safe work environment for its employees and preventing occupational injuries due to falls.
Intent??????? is committed to providing a safe work environment for its employees and preventing occupational injuries due to falls. Fall Protection is an integral part of our commitment to a safe work
More informationAt the end of this presentation you should know the difference between fall prevention, fall restraint, and fall arrest.
0 At the end of this presentation you should know the difference between fall prevention, fall restraint, and fall arrest. We will review the hazards associated with fall protection and how to mitigate
More informationApplying Construction Fall Protection Concepts to General Industry
Applying Construction Fall Protection Concepts to General Industry Applying Construction Fall Protection Concepts to General Industry Michael Tesmer, CSP and David Jewell, CSP Conney Safety Products This
More information"FALL PREVENTION IN THE WORKPLACE"
MAJOR PROGRAM POINTS "FALL PREVENTION IN THE WORKPLACE" Part of the "GENERAL SAFETY SERIES" Quality Safety and Health Products, for Today...and Tomorrow Outline of Major Points Covered in the "Fall Protection"
More informationLEGISLATIVE DEVELOPMENTS IMPACTING PETROLEUM CONTRACTORS
LEGISLATIVE DEVELOPMENTS IMPACTING PETROLEUM CONTRACTORS John W. Aird Workplace Safety & Prevention Services Ontario Petroleum Contractors Association March 8, 2016 Regulations Impacting your Businesses
More informationNEW FALL PROTECTION LEGISLATION. Presented by Michael McGovern, Roland Roy
NEW FALL PROTECTION LEGISLATION Presented by Michael McGovern, Roland Roy INTRODUCTION WHY ARE CHANGES BEING MADE? The Provincial Government has brought in changes to the fall protection requirements in
More informationDREW UNIVERSITY FALL PROTECTION PROCEDURE (DRAFT 12/11)
PURPOSE The objective of this policy & guideline is to eliminate the potential for injuries and fatalities to employees and contractors resulting from falls from elevated work areas at Drew University
More information"FALL PROTECTION IN CONSTRUCTION ENVIRONMENTS"
MAJOR PROGRAM POINTS "FALL PROTECTION IN CONSTRUCTION ENVIRONMENTS" Part of the "CONSTRUCTION SAFETY KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS
More informationFALL PROTECTION PLAN FALL PROTECTION PROGRAM
FALL PROTECTION PLAN IMPORTANT: This document is intended to provide guidance only for developing site-specific fall protection plans for working at heights. FALL PROTECTION PLAN IMPORTANT: This document
More informationFALL PROTECTION / ELEVATED WORK
SEPTEMBER CORE REFRESHER HSE TOOL BOX FALL PROTECTION / ELEVATED WORK FALL PROTECTION Falls from elevations are one of the most common causes of death in this industry. OSHA requires fall protection when
More informationWARNING! DO NOT THROW AWAY THESE INSTRUCTIONS! READ AND UNDERSTAND BEFORE USING EQUIPMENT!
Guardian Fall Protection Kent, WA 800-466-6385 www.guardianfall.com GENERAL SYSTEM SELECTION CRITERIA: Selection of fall protection shall be made by a Competent Person. All fall protection equipment shall
More informationFall Protection 4/7/16
Fall Protection 4/7/16 Passive Fall Prevention Fall Restraint Fall Arrest Inspection/Maintenance 1910.23 Guarding Floor and Wall Openings and Holes 1910.66 Powered Platforms, Manlifts and Vehicle Mounted
More informationProgressive Safety Services LLC
1910.23 Guarding Floor and Wall Openings and Holes 1910.66 Powered Platforms, Manlifts and Vehicle Mounted Work Platforms. 1926.500 Fall Protection 1926.501 Duty to Have Fall Protection 1926.502 Fall Protection
More informationSECTION FACILITY FALL PROTECTION PART I - GENERAL
SECTION 11 24 29 - FACILITY FALL PROTECTION PART I - GENERAL 1.1 The Illinois Department of Labor (IDOL) regulates fall protection for general industry and construction in the public sector under the Illinois
More informationFALL PROTECTION GUIDELINE
FALL PROTECTION GUIDELINE July 2001 Table of Contents INTRODUCTION...3 CONTROL MEASURES...4 SURFACE PROTECTION...4 FIXED BARRIERS...5 EXAMPLES OF GUARDRAIL...6 WARNING BARRIERS...7 HANDRAILS...8 SURFACE
More informationFall Protection Introduction
Fall Protection Introduction Date: District: Site: Time: Department: Manager/Supervisor Name: In 1995, 1,048 construction workers died on the job, with 32 percent, or 335 of them, resulting from falls.
More information1. Objective of the initiative To ensure that all employees and subcontractors are aware of the risks associated with working at height.
Safety Initiative 02 Working at Height May 2011 CONTENTS 1. Objective of the initiative 2. Overview. 3. Implementation 4. Duties 5. Hierarchy of Controls 6. Workplace Inspections 7. Fragile Surfaces 8.
More informationFALL PROTECTION (SAF-SPI-06)
1. PURPOSE To describe the Ontario Operations standard methods for preventing serious injury resulting from fall from heights and to provide a Standard for Fall Protection to safeguard employees who work
More informationSection 16B. Fall Protection. Falls are the second leading cause of death in the workplace. Factors contributing to falling incidents:
Section 16B. Fall Protection Falls are the second leading cause of death in the workplace. Factors contributing to falling incidents: 1. Personal factors Lack of concentration. Use of medication. Poor
More informationDepartment of Facilities Management. Occupational Health and Safety. Fall Protection Program
Department of Facilities Management Occupational Health and Safety Fall Protection Program October 2016 1 1.0 INTRODUCTION This program has been developed to provide guidance to those managers and supervisors
More informationFall Protection Policy
Applicable Legislation: O. Reg. 851, R.R.O. 1990, Industrial Establishments, Section 85 O. Reg. 213/91 Construction Projects, Section 26, Section 207 O. Reg.145/00 Regulation to Amend O. Reg. 213/91 Relevant
More informationAre You OSHA Compliant? Browse Our Products Specifically For Compliance With The Updated Walking-Working Surfaces and Fall Protection Standard.
Are You OSHA Compliant? Browse Our Products Specifically For Compliance With The Updated Walking-Working Surfaces and Fall Protection Standard. OSHA s Walking-Working Surfaces and Fall Protection Standard
More informationSafe Work Practices (SWP) SWP (6) FALL PROTECTION PROGRAM
SWP (6) FALL PROTECTION PROGRAM The following information on Fall Protection has been based around the BC OHS Regulations, standards, policies and guidelines. Prior to starting work outside of BC, the
More informationSubparts D and I Walking-Working Surfaces & Personal Protective Equipment Final Rule
Subparts D and I Walking-Working Surfaces & Personal Protective Equipment Final Rule OSHA s Mission To Assure So Far as Possible Every Working Man and Woman in the Nation Safe and Healthful Working Conditions...
More informationWARNING! DO NOT THROW AWAY THESE INSTRUCTIONS! READ AND UNDERSTAND BEFORE USING EQUIPMENT!
Guardian Fall Protection Kent, WA 800-466-6385 www.guardianfall.com GENERAL SYSTEM SELECTION CRITERIA: Selection of fall protection shall be made by a Competent Person. All fall protection equipment shall
More information8. Fall Protection Procedures WAC
1.0 Fall Protection Introduction 8. Fall Protection Procedures WAC 296-155-245 If an employee is exposed to a fall hazard of ten (10) feet or more in height, the employee must use a fall restraint, fall
More informationPatrick Harel Ph
Patrick Harel Ph- 920-418-2714 pharel@capitalsafety.com The Worldwide Experts in Fall Protection Standards Occupational Safety and Health Administration (OSHA) 29 CFR 1910 and 1926 Governing Body Sets
More informationFALL PROTECTION PROGRAM (OHS-0010)
() For Issued: December 17, 2007 Revised: 1 st Issue PAGE 1 OF 17 Table of Contents 1.0 Purpose...2 2.0 Document Control...2 2.1 Approvals...2 2.2 Responsibility...2 3.0 Definitions...3 4.0 Objective...7
More informationTelecommunication Tower Technician Course Descriptions
Telecommunication Tower Technician Course Descriptions Developed by: TES, Inc. 10909 Murdock Drive Knoxville, TN 37932 800-327-4036 O*NET-SEC CODE: 49-2021.00 RAPIDS CODE: 2030CB Approved By US Department
More informationFall Protection STANDARD PROCEDURE INSTRUCTION. Fall Protection. Title SPI. Department. Supersedes SPI Dated. Jan 19, 2016.
STANDARD PROCEDURE INSTRUCTION Title Fall Protection Department Safety, Health and Environment Supersedes SPI Dated March 27, 2014 SPI 34-21 Effective Date Jan 19, 2016 Fall Protection SPI 34-21 Page 1
More information11.4 FALL-ARREST SYSTEM AND EQUIPMENT CHECKLIST (Must answer yes to all applicable questions)
11.4 FALL-ARREST SYSTEM AND EQUIPMENT CHECKLIST (Must answer yes to all applicable questions) This checklist shall be completed either by the Competent Person or a person trained and designated by the
More informationRisk Control at United Fire Group
In the United States, falls are the leading cause of fatalities on a construction site. Employers and employees need to do the following: Where protection is required, select fall protection systems appropriate
More informationS31 Opening Statement Working at Height
S31 Opening Statement Working at Height Falls from height are by far the most common cause of workplace deaths and one of the main causes of major injury in the workplace. Latest figures reveal that 46
More informationFall Protection. Fall Speed vs. Reaction Time. Good body reaction time = 0.5 seconds Travel distance in 0.5 seconds = 4 feet (1.21mts.
Fall Protection Fall Speed vs. Reaction Time Good body reaction time = 0.5 seconds Travel distance in 0.5 seconds = 4 feet (1.21mts.) In 1 second your body will fall 16 feet (4.8 mts.) By the time you
More informationFall Speed vs. Reaction Time
Fall Protection Fall Speed vs. Reaction Time Good body reaction time = 0.5 seconds Travel distance in 0.5 seconds = 4 feet (1.21mts.) In 1 second your body will fall 16 feet (4.8 mts.) By the time you
More informationRegulation Summary: Walking-Working Surfaces & Personal Protective Equipment (Fall Protection Systems); OSHA s Final Rule
Regulatory Update Regulation Summary: Walking-Working Surfaces & Personal Protective Equipment (Fall Protection Systems); OSHA s Final Rule General Industry 29 CFR 1910 On November 17, 2016, OSHA published
More informationHSE simplified guidance for working at height
HSE simplified guidance for working at height Don Aers Technical Director PASMA About PASMA The Prefabricated Access Suppliers and Manufacturers Association Formed in 1974 Represents the mobile access
More informationCentennial Fall Protection Work Plan _CP_11_20_en_A1
Centennial Fall Protection Work Plan 0206500_CP_11_20_en_A1 Project Title: Contract and Task Order Number: Project Location (be specific, include Bldg. # / Floor / grid / etc.): PSO/SSHO Name: Complete
More informationCompetent Person - Fall Protection Presented by Turner Safety- your instructor is Steve Turner
Competent Person - Fall Protection Presented by Turner Safety- your instructor is Steve Turner 1 Falls in Construction Falls are the leading cause of deaths in the construction industry. Most fatalities
More informationConducting An Effective. Welcome!
Conducting An Effective An introduction to the Five Step Process of Job Hazard Analysis JHA-JSA-SWMS-AHA Introductions Welcome! What do you know about Job Hazard Analysis (JHA s)? Does OSHA require JHA
More informationFALL PROTECTION. Leader s Guide. Marcom Group Ltd.
1818 FALL PROTECTION Leader s Guide Marcom Group Ltd. Structure and Organization Information in this program is presented in a definite order, so that employees will see the relationships between the various
More information2.2. Anchorage Point A secure point of attachment for Lifelines, lanyards or deceleration devices.
Title: Elevated Walking/Working Surfaces (Fall Protection) Site Function: Safety Procedure No.: MC032.122 Page: 1 of 16 McIntosh Site Reviewed: 02/2013 Effective: 03/2013 Supersedes: 08/2012 Preparer:
More informationCHAPTER 2 2 EMERGENCY PROCEDURES EMERGENCY PROCEDURES. Emergency Response Plan and Procedures
CHAPTER 2 EMERGENCY PROCEDURES 2 EMERGENCY PROCEDURES 3. Communication Systems To relay accurate information quickly, use reliable communications equipment, develop procedures, and train personnel. A backup
More informationFA L L P R O T E C T I O N P L A N N I N
FALL PROTECTION Planning Resource plan prevent protect The fall protection plan guidance you need to keep your company compliant Falls are by far one of the most common workplace hazards tracked by federal
More informationKey provisions of OSHA's new rule on walking/working surfaces, fall protection
ARTICLES CASES Key provisions of OSHA's new rule on walking/working surfaces, fall protection Although an overwhelming majority of general industry accidents stem from slips, trips and falls, Subpart D
More informationFALL PROTECTION CODE OF PRACTICE
FALL PROTECTION CODE OF PRACTICE This guide can help you comply with Section 50.2 of the General Regulation 91-191. NOTE: Not for use when a safety monitor is part of the fall protection system on a work
More informationSection One. Agenda Pretest What Do You Know About Cal/OSHA (Quiz) Post Test Train the Trainer Course Evaluation
Section One Agenda Pretest What Do You Know About Cal/OSHA (Quiz) Post Test Train the Trainer Course Evaluation Train-the-Trainer Course 2013 Ag da ay O 8:00-9:00am Introductions and Overview Course overview
More informationSAFETY 101: FALL PROTECTION: REDUCING FALLS DURING RESIDENTIAL CONSTRUCTION: RE-ROOFING FACT SHEET
SAFETY 101: FALL PROTECTION: REDUCING FALLS DURING RESIDENTIAL CONSTRUCTION: RE-ROOFING FACT SHEET Re-roofing exposes workers to the hazards of demolition work at heights. With the proper fall protection,
More informationDuties of WAH Competent Persons
Duties of WAH Competent Persons Who Are theses Stakeholders? What are their Roles and Responsibilities in WAH Activities? Presented By James Tay B.K. 12th Dec 2013 1 Source from OCH Division, MOM 31 st
More informationWhy Update. OSHA updated Walking Working Standard. Who & What it Covers. Housekeeping (a) 6/25/ nd Leading cause of Workplace fatalities
OSHA updated Walking Working Standard Why Update 2nd Leading cause of Workplace fatalities $70 Billion Workers Comp Cost - US 100+ Million lost workdays/year - US Cari Gray, CSP Safety Consultant Ohio
More informationWorking at Height. Policy and Procedures. Author: Beth Webster Assistant Safety Advisor. On behalf of School Safety Committee.
Working at Height Policy and Procedures Author: Beth Webster Assistant Safety Advisor Authorised by: Issued by: John Stephenson Safety Office On behalf of School Safety Committee Review Date: NO LATER
More informationUser Instructions 1790 Rail Anchor
User Instructions 1790 Rail Anchor This document is intended to meet the Manufacturer s Instruction requirements as stated by ANSI Z359.1, and should be used as part of an employee training program as
More informationLIGHTHOUSE SAFETY TRAINING 2018
Specialists in Fall Protection, Rescue and Confined Spaces tele (262) 790.1155 fax (262) 783-6211 www.lighthousesafety.com csr@lighthousesafety.com 3620 North 126th Street Brookfield, WI 53005 LIGHTHOUSE
More information7 Hazard assessment 8 Worker participation 9 Hazard elimination and control
This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. Businesses in this industry
More informationThe Work at Height Regulations 2005 A brief guide
Off work sick and worried about your job? Steps you can take to help your return to work The Work at Height Regulations 2005 A brief guide Health and Safety Executive 1 In 2003/04 falls from height accounted
More informationThe Work at Height Regulations 2005 A brief guide
The Work at Height Regulations 2005 A brief guide In 2003/04 falls from height accounted for 67 fatal accidents at work and nearly 4000 major injuries. They remain the single biggest cause of workplace
More informationThe content of this resource has been generously provided by the AGC Houston, the Associated General Contractors of America.
Construction & Utilities Division Planning Tools The content of this resource has been generously provided by the AGC Houston, the Associated General Contractors of America. Guidelines for Creation of
More informationARKANSAS TECH UNIVERSITY FACILITIES MANAGMENT HEALTH AND SAFETY MANUAL
FALL PROTECTION (PERSONAL FALL ARREST SYSTEMS) 15.0 The purpose of this policy is to specify procedures and training for the safety of the employees in the Facilities Management Group while working on
More information1 AIM 2 4 REASONS FOR INCLUSION 3 6 PLANT AND EQUIPMENT REQUIREMENTS 4 7 SYSTEM AND PROCEDURAL REQUIREMENTS 4 8 PEOPLE REQUIREMENTS 6
CONTENTS PAGE 1 AIM 2 2 APPLICATION 2 3 DEFINITIONS 2 4 REASONS FOR INCLUSION 3 5 REQUIREMENTS 3 6 PLANT AND EQUIPMENT REQUIREMENTS 4 7 SYSTEM AND PROCEDURAL REQUIREMENTS 4 8 PEOPLE REQUIREMENTS 6 APPENDIX
More informationFall Protection. Fall Prevention. vs. Sam Carbis Solutions Group. Solutions for Workplace Safety
Fall Protection vs. Fall Prevention Solutions for Workplace Safety Risks are inherent in the activities we perform every day whether driving, flying, walking, or working. Every job has its risks although
More informationROOF ANCHOR / D-RING ANCHOR PLATE
RIGGERS SAFETY Riggers Safety LLC. 267 Winfield Cr. Corona, CA 92880. 951 371 8586. www.riggerssafety.com Use and Safety Manual ROOF ANCHOR / D-RING ANCHOR PLATE Table of Contents WARNINGS 3 Definitions
More informationSG16:14. Management of Fall Protection Equipment 1. INTRODUCTION
SG16:14 Management of Fall Protection Equipment 1. INTRODUCTION The most common cause of death and serious injury within the construction industry is falling from height. All industry sectors are exposed
More informationNew Mexico Institute of Mining & Technology. Fall Protection Program
New Mexico Institute of Mining & Technology Fall Protection Program REGULATORY STANDARDS: OSHA - 29 CFR 1910.66 29 CFR 1910.128, 129, 130, 131, (Proposed) 29 CFR 1926.104 29 CFR 1926.500 BASIS: Approximately
More informationProduct Name: Hold Me Rope Anchor
Product Name: Hold Me Rope Anchor Part #: 01300 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction 1 Applicable Safety
More information1.0 Scope and Application
1.0 Scope and Application This policy contains safety requirements to protect employees from falls of six (6) feet or more when performing elevated work except on ladders and scaffolding (See Ladders and
More informationUser Instruction Manual Fixed Beam Anchor
Instructions for the following series products: FIXED BEAM ANCHOR Model Numbers: The Ultimate in Fall Protection 2108406 2108407 2108408 2108409 2108410 2108411 User Instruction Manual Fixed Beam Anchor
More informationWork at height Policy
Work at Policy Introduction This policy procedure outlines the Forces responsibility to provide guidance to all police officers and staff when working at. Many serious incidents involving working at occur
More informationTo remind workers that falling from heights can result in serious injury. Enter your name and the training date on the Training Sign-In Sheet.
Safety Training Topic Purpose of Meeting To remind workers that falling from heights can result in serious injury. To educate workers about fall prevention. To consider ways to prevent injuries cause by
More informationA GUIDE TO BUYING FALL ARREST EQUIPMENT. uk.rs-online.com (UK customers) (International customers)
A GUIDE TO BUYING FALL ARREST EQUIPMENT (UK customers) www.rs-components.com (International customers) INTRODUCTION In a world of evolving legislation employers in the EU have had a legal responsibility
More informationMSA Fall Protection Kits
MSA Fall Protection Kits Scaffolding application Falls from height continue to be the largest single cause of fatal and life changing injuries for workers across industry. Scaffolders, when erecting, altering
More information1.3 LIMITATIONS: The following application limitations must be recognized and considered before using this product:
3965 Pepin Avenue Red Wing, MN 55066-1837 Toll Free: (800) 328-6146 Phone: (651) 388-8282 Fax: (651) 388-5065 www.protecta.com User Instruction Manual AJ720A Concrete Anchor This manual is intended to
More informationWorking at Heights. Standard. Area: Regional Wood Buffalo. Document Owner (Title): General Manager, EH&S Upstream. Summary of Changes
Document Number: RGS0024A Revision Date: 2015/11/23 Revision: 1 Review Cycle: 3 Years Working at Heights Standard Area: Regional Wood Buffalo Document Owner (Title): General Manager, EH&S Upstream Facility:
More informationUpdate 29 CFR Subparts D & I
Because every life has a purpose Update 29 CFR 1910.30 Subparts D & I 1 OSHA & This Regulation OSHA has created regulations to protect workers from various hazards, including falls. OSHA has separate regulations
More informationOccupational Protective Equipment
Introduction One of the leading occupational dangers in today s workforce is the risk of death or injury due to falls. Falls from ladders, scaffolds, buildings, or other elevations have become the second
More informationReviewed: New Effective: 5/18/12 Supersedes: New Preparer: Owner: Approver: Team Member, Occupational Safety Industrial Hygiene
Procedure No.: BC032.027 Page: 1 of 15 Preparer: Owner: Approver: Team Member, Occupational Safety Industrial Hygiene Manager, Occupational Safety Industrial Hygiene Vice President, Ecology & Safety (Signature
More informationFALL PROTECTION PLAN
FALL PROTECTION PLAN CPWR The Center for Construction Research and Training created this document as part of the National Campaign to Prevent Falls in Construction to provide companies with guidance on
More informationCHAPTER 19 PERSONAL FALL PROTECTION 19 PERSONAL FALL PROTECTION. Regulations. Mandatory Training. Definitions and Terminology
CHAPTER 19 PERSONAL FALL PROTECTION 19 PERSONAL FALL PROTECTION Falls are the number one cause of critical injuries and deaths of Ontario workers on construction sites. Most fall-related incidents are
More informationMANUFACTURING TECHNICAL INSTRUCTIONS - SAFETY FALL HAZARD CONTROL REQUIREMENTS SERIES & NO. SMI - 157
1 of 6 1.0 PURPOSE To establish minimum requirements and guidelines for controlling hazardous exposure of personnel to falls from working elevations in conformance with Federal and State OSHA rules and
More informationFall Protection. Fall Protection
Fall Protection Purpose The purpose of this section is to establish protective controls for personnel working at elevated heights which will prevent or minimize injury or death resulting from falls. Scope
More informationSample Fall Rescue Plan for Bridge Work
This document is intended to provide guidance for developing fall rescue plans for bridge contractors. The Occupational Safety and Health Administration s (OSHA) regulation 29 CFR 1926.502(d)(20) states:
More informationFALL PROTECTION PLAN INSTRUCTIONS
Sonic Drilling Ltd. FALL PROTECTION PLAN INSTRUCTIONS Each employer must ensure that a fall protection system is used when work is done at a place from which a fall of 3 m (10 ft) or more may occur, or
More informationFALL PROTECTION SAFETY PROGRAM
FALL PROTECTION SAFETY PROGRAM REGULATORY STANDARD: OSHA - 29 CFR 1910.66-29 CFR 1910.128, 129, 130, 131, (Proposed) - 29 CFR 1926.104-29 CFR 1926.500-503 BASIS: Approximately 300,000 disabling injuries
More informationOCCUPATIONAL HEALTH AND SAFETY ACT FALL PROTECTION REGULATIONS
c t OCCUPATIONAL HEALTH AND SAFETY ACT FALL PROTECTION REGULATIONS PLEASE NOTE This document, prepared by the Legislative Counsel Office, is an office consolidation of this regulation, current to June
More informationAmerican National Standards Institute, ANSI Z359 Fall Protection Code Update
NAVFAC SOUTHEAST American National Standards Institute, ANSI Z359 Fall Protection Code Update John Davis, SSM Prepared by: Basil Tominna, P.E. September 2010 29 June 2012 Introduction ANSI approved several
More informationUser Instructions 1789 Parapet Wall Anchor
User Instructions 1789 Parapet Wall Anchor This manual is intended to meet the Manufacturer Instructions as required by ANSI Z359.1 and should be used as part of an employee training program as required
More informationFall Hazards, Anchor Points and Fall Clearances OSH-2 August 7, 0900
Fall Hazards, Anchor Points and Fall Clearances OSH-2 August 7, 2017 @ 0900 Phil Fincher, CIH, CSP Overview ANSI & OSHA Fall Protection Standards Definitions, Roles, & Responsibilities of Authorized, Competent,
More informationSignature: Director of Environmental Health & Safety. Fall Protection
North Carolina Agricultural and Technical State University OFFICE OF ENVIRONMENTAL HEALTH & SAFETY Safety Manual Subject: Fall Protection Number: 9-1 Date: August 1, 2017 Amends: None Supersedes: Page
More informationFall Protection Refresher Orientation. Fall Protection Refresher Orientation 1
Fall Protection Refresher Orientation Fall Protection Refresher Orientation 1 Course Objectives! Understand the definitions of fall prevention, fall restraint, and fall arrest.! Understand the requirements
More informationWalking-Working Surfaces and Fall Protection Standards Update. OSHA General Industry
Walking-Working Surfaces and Fall Protection Standards Update OSHA General Industry Background Slips, trips, and falls account for a majority of all general industry injury incidents. Caused 849 workplace
More informationThe purpose of this training is to give field technicians awareness training and guidelines on potential hazards they may encounter in the field.
Purpose The purpose of this training is to give field technicians awareness training and guidelines on potential hazards they may encounter in the field. Fall Protection and Prevention JELD-WEN Field Employees
More informationFREQUENTLY ASKED QUESTIONS ABOUT FALL PROTECTION
FREQUENTLY ASKED QUESTIONS ABOUT FALL PROTECTION What s the difference between polyester and nylon webbing in harnesses and lanyards? Nylon (polyamide) and polyester are both synthetic products with very
More informationUser Instruction Manual Fixed Beam Anchor
User Instruction Manual Fixed Beam Anchor This manual is intended to meet the Manufacturer s Instructions as required by ANSI Z359.1 and ANSI A10.14, and should be used as part of an employee training
More informationFACILITIES MANAGEMENT OFFICE OF ENVIRONMENTAL HEALTH AND SAFETY Fall Protection Policy 11/21/14 Last Revision
FACILITIES MANAGEMENT OFFICE OF ENVIRONMENTAL HEALTH AND SAFETY Fall Protection Policy 11/21/14 Last Revision INTENT To provide written procedures and guidelines for all University at Albany employees
More informationOSHA s new walking working surfaces standards
OSHA s new walking working surfaces standards changes and new requirements Inspection of walking working surfaces 1910.22(d) Regularly and as needed and correct, repair, or guard against hazardous conditions;
More informationProduct Name: Rope Grab
Product Name: Rope Grab Part #: 01500; 01503; 01505; 01506; 01507; 01511 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction
More information