Service Manual DX70 Pump Packages
|
|
- Colin Gray
- 5 years ago
- Views:
Transcription
1 Service Manual DX70 Pump Packages R1.3 1/16
2 Product Description / Object of Declaration: Diaphragm Pumps DX70, DX200, DX2003 Bare pump and packages This Product is designed for use with: Solvent and Water based Materials Suitable for use in hazardous area: Zone 1 Protection Level: II 2 G c X IIB T4 Notified body details and role: TRAC Global Ltd (0891) This Declaration of conformity / incorporation is issued under the sole responsiblility of the manufacturer: Lodging of Technical file Finishing Brands UK Ltd, Ringwood Road, Bournemouth, BH11 9LH. UK EU Declaration of Conformity The object of the declaration described above is in conformity with the relevant Union harmonisation legislation: Machinery Directive 2006/42/EC ATEX Directive 2014/34/EU by complying with the following statutory documents and harmonized standards: ISO 12100:2010 Safety of Machinery General Principles for Design 12621:+A1:2010 Machinery for the supply and circulation of coating materials under pressure Safety requirements 11271:2011 Explosive atmospheres Explosion prevention Basic concepts :2009 Non electrical equipment for use in potentially explosive atmospheres Basic methods and requirements :2011 Non electrical equipment for use in potentially explosive atmospheres Protection by constructional safety Providing all conditions of safe use / installation stated within the product manuals have been complied with and also installed in accordance with any applicable local codes of practice. Signed for and on behalf of Finishing Brands UK Ltd: D Smith 20/4/16 Director of Sales (EMEA) Bournemouth,BH11 9LH,UK R1.3 2/16
3 In this part sheet, the words WARNING, CAUTION and NOTE are used to emphasize important safety information as follows: WARNING CAUTION NOTE Hazards or unsafe practices which could result in severe personal injury, death or substantial property damage. Hazards or unsafe practices which could result in minor personal injury, product or property damage Important installation, operation or maintenance information. WARNING Read the following warnings before using this equipment. READ THE MANUAL. Before operating finishing equipment, read and understand all safety, operation and maintenance information provided in the operation manual. AUTOMATIC EQUIPMT. Automatic equipment may start suddenly without warning. WEAR SAFETY GLASSES. Failure to wear safety glasses with side shields could result in serious eye injury or blindness. DEERGIZE, DEPRESSURISE, DISCONNECT AND LOCK OUT ALL POWER SOURCES DURING MAINTANCE. Failure to deenergize, disconnect and lock out all power supplies before performing equipment maintenance could cause serious injury or death. PROJECTILE HAZARD. You may be injured by venting liquids or gased that are released under pressure, or flying debris. KNOW WHERE AND HOW TO SHUT OFF THE EQUIPMT IN CASE OF AN EMERGCY. NOISE LEVELS. The Aweighted sound level of pumping and spray equipment may exceed 85 db(a) depending on equipment settings. Actual noise levels are available on request. It is recommended that ear protection is worn at all times while equipment is in use. PRESSURE RELIEF PROCEDURE. Always follow the pressure relief procedure in the equipment instruction manual. INSPECT THE EQUIPMT DAILY. Inspect the equipment for worn or broken parts on a daily basis. Do not operate the equipment if you are uncertain about its condition. EQUIPMT MISUSE HAZARD. Equipment misuse can cause the equipment to rupture, malfunction or start unexpectedly and result in serious injury. HIGH PRESSURE CONSIDERATION. High pressure can cause serious injury. Relieve all pressure before servicing. Spray from the gun, hose leaks or ruptured components can inject fluid into your body and cause extremely serious injury. STATIC CHARGE. Fluid may develop a static charge that must be dissipated through proper grounding of the equipment, objects to be sprayed and alll other electrically conductive objects in the dispensing area. Improper grounding or sparks can cause a hazardous condition and result in fire, explosion or elecrtic shock and other serious injury. OPERATOR TRAINING. All personnel must be trained before operating finishing equipment. PACEMAKER WARNING. You are in the presence of magnetic fields which may interfere with the operation of certain pacemakers. KEEP EQUIPMT GUARDS IN PLACE. Do not operate the equipment if the safety devices have been removed. NEVER MODIFY THE EQUIPMT. Do not modify the equipment unless the manufacturer provides written approval. PROP 65 WARNING. WARNING:This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. PINCH POINT HAZARD. Moving parts can crush and cut. Pinch points are any areas where ther are moving parts. IT IS THE RESPONSIBILITY OF THE EMPLOYER TO PROVIDE THIS INFORMATION TO THE OPERATOR OF THE EQUIPMT R1.3 3/16
4 Tripod Mounted Pumps Item Part number Description See figure 1 DXAT DX tripod assembly F1 2 DXAAC# Air controls F2 3 DXAF10ME100 Filter assembly F3 4 DXATG Tripod gravity mount Kit F4 5 DXAS25ME15 Suction hose F5 6 DX70### Bare pump 7 DXK100 Screw kit Grounding cable 4m R1.3 4/16
5 Cart & Wall Mounted Pumps Item Part number Description See figure 1 DVX101 2 DXAAC# 3 DXAF10ME100 Wall bracket Air controls Filter assembly F2 F3 4 DXACG DXAWG Cart gravity feed kit Wall gravity feed kit F6 5 DXAS25ME15 6 DX70### 7 DXK DXK Suction hose Bare pump Screw kit Grounding cable 4m Screw kit Cart F R1.3 5/16
6 Pail Mounted Pumps Item Part number Description See figure 1 DVX116 Pail Lid 2 DXAAC# Air controls F DX70### 8 DXAF10ME100 DXAP25ME15 6 DXK Filter assembly Pail Suction Tube Bare pump Screw kit Grounding cable 4m Blanking Plug DXAAF S Agitator air supply Agitator 11 DXK107 Seal pack of 4 F3 F R1.3 6/16
7 Reference figures F1 DXAT Item Part number Description DXK102 Tripod leg Fixing kit R1.3 7/16
8 F2 DXAAC3 F2 DXAAC2 F2 DXAAC1 Item Part number Description 1 GA382P Pressure gauge 2 S1817 Ø4 (5/32") air tube 3 MPV10 QD stem 1/4" female R1.3 8/16
9 F3 DXAF10ME100 Item Part number Description VS VS DVX100 3/8" x 1/4" universal (BSPP/NPSM) nipple Filter 150 µm/100 mesh Filter 250 µm/60 mesh Filter feed hose R1.3 9/16
10 F4 DXATG Item Part number Description ZZ ZZ DVX93 6 DXK103 7 DVX125 Tension ring Filter 6L (1.6 US Gal) hopper PTFE Seal Adapter Clamp kit Suction hose R1.3 10/16
11 F5 DXAS25ME15 Item Part number Description 1 DVX86 2 DXK104 3 DVX89 Suction hose Seal pack of 4 Strainer 1300µm/15 mesh R1.3 11/16
12 F6 DXACG & WG Item Part number Description Tension ring Strainer 3 ZZ2571 6L (1.6 US Gal) hopper 4 ZZ2587 PTFE Seal 5 DXK101 Fixings 6 DVX99 Locknut 7 DVX96 Adapter 8 DVX125 Suction hose F7 DXAP25ME15 Item Part number Description 1 DVX89 Strainer 1300µm/15 mesh R1.3 12/16
13 Accessories DXADVG Dump valve kit for gravity feed DXADVT Dump valve kit for tripod & pail DXADVW Dump valve kit for wall/cart R1.3 13/16
14 Accessories DXAAF Agitator air supply DXARP Fluid regulator maximum pressure supply R1.3 14/16
15 Package part numbers DX70 R 3 C F G R N REGULATOR TYPE FLUID REGULATOR NO FLUID REGULATOR AIR REGULATORS 1 1 REGULATOR G 2 2 REGULATORS 3 3 REGULATORS A OPTIONS NO OPTION GRAVITY FEED AGITATOR MOUNTING TYPE C CART W WALL F T P TRIPOD PAIL FILTER NO FILTER FILTER R1.3 15/16
16 WARRANTY POLICY Binks products are covered by Carlisle Fluid Technologies five year materials and workmanship limited warranty. The use of any parts or accessories, from a source other than Carlisle Fluid Technologies, will void all warranties. For specific warranty information please contact the closest Carlisle Fluid Technologies location listed below. Carlisle Fluid Technologies reserves the right to modify equipment specifications without prior notice. DeVilbiss, Ransburg, MS, BGK and Binks are registered trademarks of Carlisle Fluid Technologies, Inc Carlisle Fluid Technologies, Inc. All rights reserved. Binks is part of Carlisle Fluid Technologies, a global leader in innovative finishing technologies. For technical assistance or to locate an authorized distributer, contact one of our international sales and customer support locations below. USA/Canada info@carlisleft.com Toll Free Tel: Toll Free Fax: Mexico ventas@carlisleft.com.mx Tel: Fax: Brazil vendas@carlisleft.com.br Tel: Fax: United Kingdom info@carlisleft.eu Tel: +44 (0) Fax: +44 (0) France info@carlisleft.eu Tel: +33(0) Fax: +33(0) Germany info@carlisleft.eu Tel: +49 (0) Fax: +49 (0) China mkt@carlisleft.com.cn Tel: Fax: Japan overseassales@carlisleft.co.jp Tel: Fax: Australia sales@carlisleft.com.au Tel: +61 (0) Fax: +61 (0) R1.3 16/16
Service Manual EN DX70. Pump Packages. Patent US R1.6 1/16
Service Manual EN DX70 Pump Packages Patent US 9447780 773201R1.6 1/16 www.carlisleft.com Product Description / Object of Declaration: Diaphragm Pumps DX70, DX200, DX2003 Bare pump and packages EN This
More informationService Manual. DX70 Pump Packages
Service Manual DX70 Pump Packages Product This Product is designed for use with: Diaphragm Pumps DX70 Bare pump and packages Solvent and Water based Materials Suitable for use in hazardous area: Zone 1
More informationBinks MACH 1 PCX HVLP SPRAY GUN
SERVICE MANUAL EN Binks MACH 1 PCX HVLP SPRAY GUN (For Plural Component Catalyst Injection) 77-2687-R3.1 (10/2015) 1 / 12 In this part sheet, the words WARNING, CAUTION and NOTE are used to emphasize important
More informationDX :1. Stainless Steel Diaphragm Pump
Service Manual EN DX200-3 3:1 Stainless Steel Diaphragm Pump DX200-3SN DX200-3SP DX200-3SM 77-3212-R1.0 1/24 Product Description / Object of Declaration: Diaphragm Pumps - DX70, DX200, DX200-3 Bare pump
More informationService Manual DX70 Diaphragm Pump
Service Manual EN DX70 Diaphragm Pump 77-3200-R1.2 1/16 Product Description This Product is designed for use with: Diaphragm Pumps - DX70 Bare pump and packages Solvent and Water based Materials EN Suitable
More informationDX200 Stainless Steel Diaphragm Pump
Service Manual EN DX200 Stainless Steel Diaphragm Pump DX200SR DX200SN DX200SM 77-3211-R1.1 1/20 Product Description This Product is designed for use with: Diaphragm Pumps - DX70, DX200 Bare pump and packages
More informationBINKS SG-2 PLUS TM ROTARY 2 QT. PRESSURE CUP
SERVICE MANUAL EN INTRODUCTION BINKS SG-2 PLUS TM ROTARY 2 QT. PRESSURE CUP MODEL NO. 80-651 ROTARY AGITATOR Binks SG-2 TM Plus Rotary 2 Qt. Pressure Cup is ideal for component spraying and industrial
More informationBinks SG-2 Plus TM Rotary 2 QT. PRESSURE CUP
Binks SG-2 Plus TM Rotary 2 QT. PRESSURE CUP Model No. 80-651 Rotary Agitator INTRODUCTION Binks SG-2 TM Plus Rotary 2 Qt. Pressure Cup is ideal for component spraying and industrial applications where
More informationMODELS & (OBS) REMOTE FLUID PRESSURE REGULATORS (30 OZ./MIN. & 100 OZ./MIN.)
SERVICE MANUAL EN MODELS 84-598 & 84-599 (OBS) REMOTE FLUID PRESSURE REGULATORS (30 OZ./MIN. & 100 OZ./MIN.) INTRODUCTION The Binks Models 84-598 and 84-599 (obsolete) Remote Fluid Pressure Regulators
More informationBINKS SG-2 PLUS TM 2 QT. PRESSURE CUPS
SERVICE MANUAL EN BINKS SG-2 PLUS TM 2 QT. PRESSURE CUPS MODEL NO. 80-600 (STANDARD) MODEL NO. 80-601 (WITH OSCILLATING AGITATOR) INTRODUCTION Binks SG-2 Plus TM Pressure Cup is ideal for component spraying
More informationBINKS WREN AIR BRUSHES MODELS A **, B, AND C ** OPERATING INSTRUCTIONS
SERVICE MANUAL BINKS WR AIR BRUSHES MODELS 59-10001 A **, 59-10002 B, AND 59-10021 C ** OPERATING INSTRUCTIONS **Models A and C are discontinued. (Shown for component replacement only.) IMPORTANT! DO NOT
More informationBINKS SV100 HVLP GRAVITY FEED SPRAY GUN
SERVICE MANUAL EN BINKS SV100 HVLP GRAVITY FEED SPRAY GUN 7042-6931-4 The following instructions provide the necessary information for the proper maintenance of the Binks SV100 gravity feed spray gun.
More informationBINKS SV100 HVLP PRESSURE FEED SPRAY GUN
SERVICE MANUAL EN BINKS SV100 HVLP PRESSURE FEED SPRAY GUN 7041-6931-1 The following instructions provide the necessary information for the proper maintenance of the Binks SV100 pressure feed spray gun.
More informationBinks SV100 Conventional Suction Feed Spray Gun
Binks SV100 Conventional Suction Feed Spray Gun The following instructions provide the necessary information for the proper maintenance of the Binks SV100 suction feed spray gun. Please read and understand
More informationMX412 12:1 PUMP SYSTEMS FOR AIR ASSIST & AIRLESS FINISHING
SERVICE MANUAL EN MX4 : PUMP SYSTEMS FOR AIR ASSIST & AIRLESS FINISHING Patent 7,03,8 SPECIFICATIONS Ratio: : Maximum air inlet pressure: Maximum fluid pressure: Displacement per cycle: Output @ 0 cycles/min:
More informationBinks Model 21 (Brass Body) Automatic Spray Gun General Arrangement Diagram and Hook-Up. Side Port Control. Fluid. Cylinder Air Fluid.
Binks Model 21 Automatic Spray Gun (Brass Body) 6220-XXXX-X Binks Model 21 (Brass Body) Automatic Spray Gun General Arrangement Diagram and Hook-Up Atomizing Air Cylinder Air Shut-Off Cocks To Supply Atomizing
More informationMX412 12:1 Pump Systems for Air Assist & Airless Finishing
MX412 12:1 Pump Systems for Air Assist & Airless Finishing Patent Pending SPECIFICATIONS Ratio: 12:1 Maximum air inlet pressure: 8 bar [116 psi] Maximum fluid pressure: 96 bar [1390 psi] Displacement per
More information183G (GALVANIZED) AND 183S (STAINLESS STEEL) 2-GALLON ASME TANKS CAPACITY UP TO 2.8 GALLONS
SERVICE MANUAL EN 8G (GALVANIZED) AND 8S (STAINLESS STEEL) -GALLON ASME TANKS CAPACITY UP TO.8 GALLONS Important: Read and follow all instructions and SAFETY PRECAUTIONS before using this equipment. Retain
More information183S2 (STAINLESS STEEL) 15 GALLON ASME TANKS
SERVICE MANUAL EN 18S (STAINLESS STEEL) 15 GALLON ASME TANKS " NPT BOTTOM OUTLET TANKS Important: Read and follow all instructions and SAFETY PRECAUTIONS before using this equipment. Retain for future
More informationEN MX432 32:1 Pump Systems for Air Assist & Airless Finishing Patent Pending
EN MX432 32:1 Pump Systems for Air Assist & Airless Finishing Patent Pending SPECIFICATIONS Ratio: 32:1 Maximum air inlet pressure: Maximum fluid pressure: Displacement per cycle: Output @ 60 cycles/min:
More informationBINKS MODEL 7 SPRAY GUN (6100-XXXX-X)
SERVICE MANUAL EN BINKS MODEL 7 SPRAY GUN (6100-XXXX-X) Your new Binks spray gun is exceptionally rugged in construction, and is built to stand up under hard, continuous use. However, like any other fine
More informationAIRLESS 75M SPRAY GUN 7500 PSI
SERVICE MANUAL EN AIRLESS 75M SPRAY GUN 7500 PSI (0811-7500-4) The following instructions provide the necessary information for the proper operation and preventive maintenance of the Binks Airless 75M
More information43P Airless Gun MODEL: DESCRIPTION
43P Airless Gun MODEL: 6730-0000-6 PURGE NOZZLE SAFETY LOCK SOLVENT DESCRIPTION The Binks Model 43P is a low to medium-volume plural component (spray and/or pour) dispensing device designed specifically
More informationMX :1 Pump Systems for Air Assist & Airless Finishing
MX1212 12:1 Pump Systems for Air Assist & Airless Finishing Patent 7,603,855 SPECIFICATIONS Ratio: 12:1 Maximum air inlet pressure: Maximum fluid pressure: Displacement per cycle: Output @ 60 cycles/min:
More informationBinks MACH 1PC HVLP SPRAY GUN FOR PLURAL COMPONENT CATALYST INJECTION
Binks MACH 1PC HVLP SPRAY GUN FOR PLURAL COMPONENT CATALYST INJECTION The Binks MACH PLURAL COMPONENT 1PC HVLP Gun is the lightest top quality high performance spray gun available today. You only have
More informationMODEL 7 SPRAY GUN (6100-XXXX-X)
SERVICE MANUAL MODEL 7 SPRAY GUN (6100-XXXX-X) Your new Binks spray gun is exceptionally rugged in construction, and is built to stand up under hard, continuous use. However, like any other fine precision
More informationSAFETY MANUAL FOR FLAMMABLE PRODUCT TRANSFER
SAFETY MANUAL FOR FLAMMABLE PRODUCT TRANSFER SUPPLIMENT TO eom IMPORTANT READ THIS MANUAL BEFORE PRODUCT INSTALLATION, OPERATION, INSPECTION & MAINTENANCE Tougher and more rigid guidelines are being established
More informationCorrosion Control Equipment and Supplies
Distributed by: Corrosion Control Equipment and Supplies Houston Office: 248 McCarty Dr. Houston, TX 77029-1195 (713) 672-8251 Fax (713) 672-6636 1-800-CLEMTEX www.clemtex.com clemtex@clemtex.com Dallas
More informationSSFU SUPER SPRAYFAST UNIVERSAL ADHESIVE APPLICATOR
S S F U SSFU SUPER SPRAYFAST UNIVERSAL ADHESIVE APPLICATOR MACHINERY DIVISION OWNER S MANUAL UNIT INSTRUCTIONS Please follow all SSFU Safety Instructions. Contact your Duro Dyne Tech Service if you have
More informationOPERATION / 3Z9305G 1:1 RATIO TRITON / Spray Packages / / / List of Models, page 2 / / / 100 psi (7 bar, 0.7 MPa) Maximum Working Pressure
OPERATION / / 1:1 RATIO TRITON / 3Z9305G Spray Packages / / / List of Models, page 2 / / / 100 psi (7 bar, 0.7 MPa) Maximum Working Pressure Related manuals....... 309304, Parts /....... 309303, Pump /.......
More informationInstruction Manual. Standard Surge Eliminator. Standard X. Flushable X - X
Standard Surge Eliminator Standard 104052 - X Flushable 104053 - X - X Page 2 of 16 Issue: 2.3 Index Section 1.1 General Description 1.2 Operating Principle 1.3 Specification 1.4 Fitting Selection - Standard
More information7500 PSI Airless Spray Gun
7500 PSI Airless Spray Gun For trained, professional use only! Maximum working pressure: 7500 PSI 517 BAR 51.7 Mpa Models 1108-7500-2 & 1108-7500-4!! SAFETY, OPERATING AND MAINTENANCE INSTRUCTIONS INSIDE!!
More information3500 PSI Airless Spray Gun
3500 PSI Airless Spray Gun For trained, professional use only! Maximum working pressure: 3500 PSI 241 BAR 24.1 Mpa Models 1108-3500-2 & 1108-3500-4!! SAFETY, OPERATING AND MAINTENANCE INSTRUCTIONS INSIDE!!
More information183G (GALVANIZED) 5, 10, AND 15 GALLON ASME TANKS
SERVICE MANUAL EN 8G (GALVANIZED) 5, 0, AND 5 GALLON ASME TANKS Important: Read and follow all instructions and SAFETY PRECAUTIONS before using this equipment. Retain for future reference. ACTUAL CAPACITIES
More information83C PRESSURE TANK SMALL TANK UP TO 2.8 GALLONS
SERVICE MANUAL EN 83C PRESSURE TANK SMALL TANK UP TO 2.8 GALLONS IMPORTANT: Read and follow all instructions and SAFETY PRECAUTIONS before using this equipment. Retain for future reference. PROP 5 WARNING
More informationOperation Manual Advanced-Conventional Pressure Feed Spraygun
SB-E-2-531 ISS.07 Operation Manual Advanced-Conventional Pressure Feed Spraygun E P 1-12 E Operation Manual Advanced Conventional Pressure Feed Spraygun Important Read and follow all instructions and Safety
More informationDIAPHRAGM PUMP MODEL PDM 1-175
INSTRUCTION MANUAL DIAPHRAGM PUMP MODEL PDM 1-175 Manual : 0704 573.034.112 Date : 18/04/07 - Supersede : 17/06/02 - Modif. : + ATEX KREMLIN REXSON - 150, avenue de Stalingrad - 93245 STAINS Cedex - FRANCE
More informationPressure Relief Valve Instruction Manual
CVR3-M0_062017 Pressure Relief Valve Instruction Manual MODEL: CVR3 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website:
More informationOPERATION MANUAL BFX-2
OPERATION MANUAL BFX-2 Brake Fluid Exchanger IMPORTANT Test drive vehicle after service to verify proper brake system performance. MAHLE Aftermarket Inc., Service Solutions 10 Innovation Drive York, PA
More informationFire-Ball 300 and 425 Grease Pumps
Instructions Parts List Fire-Ball 300 and 425 Grease Pumps Stationary installations and mobile units for pumping non-corrosive and non-abrasive lubricants. Important Safety Instructions. Read all warnings
More informationBinks Model 7 SPRAY GUN (6100-XXXX-X)
Binks Model 7 SPRAY GUN (6100-XXXX-X) Your new Binks spray gun is exceptionally rugged in construction, and is built to stand up under hard, continuous use. However, like any other fine precision instrument,
More informationEnglish. Introduction. Safety Instructions. All Products. Inspection and Maintenance Schedules. Parts Ordering. Specifications WARNING WARNING
Contents All Products... Gb-1 Control Valves... Gb-2 Control Valve Actuators... Gb-3 Regulators... Gb-3 Relief Valves... Gb-4 Instruments, Switches, and Accessories... Gb-4 Products Covered by Battery
More informationINTENDED USE TECHNICAL SPECIFICATIONS
1/2IN. HEAVY-DUTY AIR IMPACT WRENCH OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result
More informationSB-E ISS.01. Operation Manual: KB-522 & KB-522-SS Pressure Feed Cup E P ITW Finishing Systems and Products
SB-E-4-205 ISS.01 Operation Manual: KB-522 & KB-522-SS Pressure Feed Cup E P 1-12 Operation Manual: KB-522& KB-522-SS Pressure Feed Cups Important: Read and follow all instructions and SAFETY PRECAUTIONS
More informationOPERATION MANUAL MPV-623 AIR-FED VIZOR
SB-EE-25-0481 Iss.04 OPERATION MANUAL MPV-623 AIR-FED VIZOR 2 E Operation Manual MPV-623 AIR-FED VIZOR Important Read and follow all instructions and Safety Precautions before using this equipment SAFETY
More informationBinks PNEUMATIC DIAPHRAGM PUMP DVP-GEMINI (RATIO 1:1)
Binks PNEUMATIC DIAPHRAGM PUMP DVP-GEMINI (RATIO 1:1) IMPORTANT Read and follow all instructions, recommendations and safety precautions before using this equipment. It is the responsibility of the employer
More informationSB-E ISS.07. Operation Manual AGN-502 Automatic gun
EN SB-E-2-660 ISS.07 Operation Manual AGN-502 Automatic gun EC Declaration of Conformity We, Finishing Brands UK Limited, Ringwood Rd, Bournemouth, Dorset, BH11 9LH, UK, as the manufacturer of the Automatic
More informationOWNER S MANUAL. Page: 1 of 8
Air Needle Scaler OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal
More informationTL-12 FLUSH TANK. Manual Ref. # MN-??? Polyurethane Machinery Corp. REVISION 1.0
TL-12 FLUSH TANK Manual Ref. # MN-??? REVISION 1.0 Polyurethane Machinery Corp. Corporate: 1 Komo Dr, Lakewood, NJ 08701 Manufacturing: 2 Komo Dr, Lakewood, NJ 08701 Phone: 732-415-4400 Fax: 732-364-4025
More information2-Liter Pressure Cup. Instructions - Parts List C
Instructions - Parts List 2-Liter Pressure Cup 309925C Model 234413 50 psi (345 kpa, 3.4 bar) Maximum Fluid Pressure 160 psi (1.1 MPa, 11 bar) Maximum Air Inlet Pressure This manual contains important
More informationComposite Pistol-Type Air Needle Scaler OWNER S MANUAL
Composite Pistol-Type Air Needle Scaler OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may
More informationHANDBOOK. Squeeze Off Unit SOU 400. Please refer any queries to:
HANDBOOK Squeeze Off Unit SOU 400 Please refer any queries to: Hy Ram Engineering Co Ltd Pelham Street Mansfield Nottinghamshire NG18 2EY Telephone No: (01623) 422982 Please note all queries should state
More informationOperator s Manual. with Maintenance Schedule. Fourth Edition Second Printing Part No
Operator s Manual with Maintenance Schedule Fourth Edition Second Printing Part No. 82297 Operator s Manual Fourth Edition Second Printing Important Read, understand and obey these safety rules and operating
More informationaccidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS
18 GAUGE 2 INCH BRAD NAILER Model: 7555 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry.
More informationSafety Powder Spray Systems
Instruction Sheet P/N 107 952C Safety Powder Spray Systems 1. Introduction This section contains general safety instructions for using your Nordson equipment. Task- and equipment-specific warnings are
More informationaccidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS
18 GAUGE 1-1/4 INCH BRAD NAILER Model: 7611 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry.
More informationBinks Model 7 Spray Gun (6100-XXXX-X)
Binks Model 7 Spray Gun (6100-XXXX-X) Your new Binks spray gun is exceptionally rugged in construction, and is built to stand up under hard, continuous use. However, like any other fine precision instrument,
More informationOperating instructions Diaphragm pump MP-520. Article No Original operating instructions. T-Dok-397-EN-Rev.0web
GB Operating instructions Diaphragm pump MP-520 Article No. 200-0216 200-0330 Original operating instructions T-Dok-397-EN-Rev.0web Thank you for selecting a Krautzberger product. This product has been
More informationBack Pressure Regulator
Instructions Parts List STAINLESS STEEL, WATERBASE COMPATIBLE Back Pressure Regulator 308401E For use in circulating systems to provide regulated back pressure to spray gun(s) and to maintain proper system
More informationMounting and Operating Instructions EB 2558 EN. Self-operated Pressure Regulators. Type Pressure Build-up Regulator
Self-operated Pressure Regulators Type 2357-31 Pressure Build-up Regulator with safety function and integrated excess pressure valve Type 2357-31 with non-return unit at port C Ports A and B with soldering
More informationACCU-PULSE Installation and Operation Instructions
ACCU-PULSE Installation and Operation Instructions Pump Discharge Installation: Chargeable Models Step 1: Mounting Position Mount ACCU-PULSE as close to the pump discharge as possible to absorb the pulse
More informationTactAir PCP Fill Kit/Adapter. Operation Manual
TactAir PCP Fill Kit/Adapter Operation Manual INTRODUCTION Thank you for choosing a TactAir PCP fill accessory! Always exercise caution when operating this item. It will allow you to fill your PCP airguns
More informationHANDBOOK. Squeeze Off Unit SOU 250. Please refer any queries to:
HANDBOOK Squeeze Off Unit SOU 250 Please refer any queries to: Hy Ram Engineering Co Ltd Pelham Street Mansfield Nottinghamshire NG18 2EY Telephone No: (01623) 422982 Please note all queries should state
More informationAIR COMPRESSOR. Failure to follow all instructions as listed below may result in electrical shock, fire, and/or serious personal injury.
2 GALLON AIR COMPRESSOR Model: 7517 DO NOT RETURN TO STORE. Please CALL 800-348-5004 for parts and service. CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials
More informationGE Oil & Gas Model. Masoneilan* Air Lock-up Valve Instruction Manual. GE Data Classification : Public
GE Oil & Gas 77-6 Model Masoneilan* Air Lock-up Valve Instruction Manual GE Data Classification : Public THESE INSTRUCTIONS PROVIDE THE CUSTOMER/OPERATOR WITH IMPORTANT PROJECT-SPECIFIC REFERENCE INFORMATION
More informationINSTRUCTIONS PARTS LIST
INSTRUCTIONS PARTS LIST 308 845 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. Rev. C ACETAL HUSKY 307, WALL-MOUNT
More informationInstructions Parts List. Contents E. HIGH VOLUME Air Control Kits. 250 psi (1.7 MPa, 17.2 bar) Maximum Air Inlet Pressure
Instructions Parts List HIGH VOLUME Air Control Kits 250 psi (.7 MPa, 7.2 bar) Maximum Air Inlet Pressure 3088E Contents List of Models........................... 2 Warnings...............................
More informationAC1810 / AC1810-A TECHNICAL SPECIFICATIONS. Operating Pressure psi ( kgs/cm²) [AC1810] Displacement. Net Weight
Technical Specifications Operating Instructions Maintenance Information Troubleshooting Guide Parts Diagrams AC1810 / AC1810-A THE EVOLUTION OF PERFECTION CAUTION: Before attempting to use or service this
More informationOPERATION. Zinc Sprayer. For Maximum Working Pressure see page 2. Rev. E
OPERATION 309362 Rev. E U.S. Patent Pending Related manuals Zinc Sprayer....... 309340 List of Models, page 2 For Maximum Working Pressure see page 2....... 309092, 308438.. 307049.. 309342 INSTRUCTIONS
More informationINSTRUCTIONS PARTS LIST This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE
INSTRUCTIONS PARTS LIST 307 900 This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE STAINLESS STEEL (ASME) Pressure Tanks 100 psi (7 bar) Maximum Working Pressure with
More informationCS150 CAP STAPLER OWNER S MANUAL
Operation Revised 6/2013 www.stingerworld.com CS150 CAP STAPLER OWNER S MANUAL! Maintenance Safety Warranty PLEASE READ! This manual contains important information about product safety. WELCOME TO STINGER
More informationHuskyt/ Twistorkt Package
Instructions-Parts List Huskyt/ Twistorkt Package 308656G EN Usedtomixandtransferfluidsinbung-type,55-gallon(200-liter) drums. For professional use only. 100psi(0.69MPa,6.9bar)MaximumAirInputPressure Model
More informationINSTRUCTION MANUAL AIRMIX AUTOMATIC SPRAY GUN
INSTRUCTION MANUAL AIRMIX AUTOMATIC SPRAY GUN Manual : 0802 573.013.212 Date : 4/02/08 - Supersede : 18/09/06 - Modif.: Update KREMLIN REXSON 150, avenue de Stalingrad 93 245 - STAINS CEDEX - FRANCE Téléphone
More informationSPECIFICATIONS Type: Twin stack, single phase Tank: 4 gallon Air Output: PSI; PSI Max PSI: 125 PSI HP: 1.
2 GALLON TWIN STACK AIR COMPRESSOR Model: 9526 DO NOT RETURN TO STORE. Please CALL 800-348-5004 for parts and service. CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or
More information2.5 & 5.0 GALLON PRESSURE TANKS
2.5 & 5.0 GALLON PRESSURE TANKS Includes: MODEL 7025 MODEL 7026 MODEL 7027 MODEL 7028 2.5 Gallon Single Regulation (NON A.S.M.E.) 2.5 Gallon Dual Regulation (NON A.S.M.E.) 5.0 Gallon Single Regulation
More informationINSTRUCTIONS PARTS LIST
3066V-E INSTRUCTIONS PARTS LIST INSTRUCTIONS! This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. AQ Poppet Color Valve (3066-41-00A) 304 Stainless Steel Body Autoquip,
More informationAdvanced Fluid Handling Cart Owner s Manual
Advanced Fluid Handling Cart IMPORTANT Please read this carefully and thoroughly before installing and operating your Advanced Fluid Handling Cart. Please retain this owner s manual for future reference
More informationBINKS MODEL 95 SPRAY GUN 6121-XXXX-X
SERVICE MANUAL EN BINKS MODEL 95 SPRAY GUN 6121-XXXX-X Model 95 Signature Series Spray Gun This handheld gun is the premier spray gun in the Binks line. A combination of the three best industrial spray
More informationInstructions Parts List
Instructions Parts List 19 LITER (5 GALLON) SIZE Ram Mounted Pumps 306839P Important Safety Instructions. Read all warnings and instructions in this manual. Save these instructions. See page 2 for model
More informationInstruction Manual. Active Surge Eliminator X X
Active Surge Eliminator 104050 X X Note: Read and follow all instructions and safety precautions before using this equipment Product Description 104050-X-X ACTIVE FLUSHABLE SURGE ELIMINATOR (ST ST) This
More information2 GALLON TWIN STACK AIR COMPRESSOR W/ HOSE REEL
2 GALLON TWIN STACK AIR COMPRESSOR W/ HOSE REEL Model: 52024 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement,
More informationJ Air and Water Kit Instructions Part# 02584
J Air and Water Kit Instructions Part# 02584 Unpacking Please open and inspect your package upon receipt. Your package was packed with great care and all the necessary packing materials to arrive to you
More informationInstruction Manual. CG16K Barometrically Compensated Capsule Dial Gauge. CG16K Capsule Dial Gauge, 0 to 25 mbar
Instruction Manual D356-10-880 Issue G Original CG16K Barometrically Compensated Capsule Dial Gauge Description CG16K Capsule Dial Gauge, 0 to 1040 mbar CG16K Capsule Dial Gauge, 0 to 125 mbar CG16K Capsule
More informationLUBRICATOR ASSEMBLY AND OPERATING INSTRUCTIONS
AIR FILTER, REGULATOR AND LUBRICATOR 4035 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 004 by Harbor Freight
More information50:1 Fire Ball 300 Pump Module
Instructions Parts List 50:1 Fire Ball 300 Pump Module 308955F For automatic lubrication systems only. Part No. 241573, Series C 3500 psi (24.1 MPa, 241 bar) Maximum Fluid Outlet Pressure 70 psi (0.48
More informationBattery-powered Micro Cutters
SERVICE MANUAL ES32ML ES32FML EBS12ML Battery-powered Micro Cutters Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this
More informationINSTRUCTIONS PARTS LIST
INSTRUCTIONS PARTS LIST 308 821 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. Rev. A ACETAL HUSKY 307, LIGHT-DUTY
More informationPortable Oil Lube Air Compressors
Portable Oil Lube Air Compressors 8003631 8003632 0410149 8018968 8018940 Owner s Manual Read and understand operating instructions before use Safety definitions The information listed below should be
More informationDK ton, Double-acting, Die-type Crimping Tool
INSTRUCTION MANUAL DK6040 60-ton, Double-acting, Die-type Crimping Tool Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register
More informationGATOR Battery-powered Pistol Grip Cable Cutters
OPERATION MANUAL Serialnummer (ESG45L shown) GATOR Battery-powered Pistol Grip Cable Cutters Read and understand all of the instructions and safety information in this manual before operating or servicing
More informationEnglish. Safety Instructions Form /2007 WARNING. All Products. How to Get Safe-Use Guides. Inspection and Maintenance Schedules
Safety Instructions Form 5740 10/2007 English All products...gb -3 All Products Control Valves...Gb-4 Control Valve Actuators...Gb-4 Regulators...Gb-5 Instruments, Switches and accessories...gb-6 These
More informationAIR COMPRESSOR OPERATING INSTRUCTION AND PARTS LIST
AIR COMPRESSOR OPERATING INSTRUCTION AND PARTS LIST OIL-LESS TYPE IMPORTANT: PLEASE READ CAREFULLY BEFORE STARTING OPERATIONS. THE CONTENTS ARE FOR GENERAL INFORMATION OF ALL THE SIMILAR MODELS. Record
More informationFeed and Solvent Flush Kits
Instruction - Parts Feed and Solvent Flush Kits 310863M EN For use with proportioner systems. For professional use only. Important Safety Instructions Read all warnings and instructions in this manual.
More informationPENBERTHY SUBMERSIBLE AUTOMATIC SUMP DRAINER INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
Before installation, these instructions must be read carefully and understood. PRODUCT WARRANTY Emerson warrants its Penberthy products as designed and manufactured to be free of defects in the material
More informationAPS-100 Primer Spray Module
Instructions Parts List APS-100 Primer Spray Module 310109G Used to circulate, dispense, and apply AFS primers. Not for use in Explosive Atmosphere locations. Module 970246 100 psi (0.7 MPa, 7 bar) Maximum
More informationT1-Titanium HVLP Siphon Feed Spray Gun
T1-Titanium HVLP Siphon Feed Spray Gun THE SPRAY GUN PEOPLE FOR PRODUCT INFORMATION CALL: 1-800-742-7731 Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions.
More information453 Series Steam Heated Vaporizing Regulator
ADI 0453A Certified ISO 9001:2000 453 Series Steam Heated Vaporizing Regulator INSTALLATION AND OPERATION INSTRUCTIONS Before Installing or Operating, Read and Comply with These Instructions Controls Corporation
More informationB84G - Excelon Plus Modular System General purpose filter/regulator
> Port size: 3/8" to 3/4" (PTF/ISO G) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Push to lock adjusting knob with built in tamper resistant
More informationStandard and Low-Flow Metric Powder Feed Pumps
Instruction Sheet P/N 06699E Standard and Low-Flow Metric Powder Feed Pumps Introduction Standard and low-flow metric powder feed pumps are used to deliver organic and metallic powder coatings to powder
More informationModel ASSEMBLY and OPERATING INSTRUCTIONS
QUICK CHANGE AIR BRUSH KIT Model 93506 ASSEMBLY and OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More information