SV60 Safety valves. for use with steam, gas and liquids
|
|
- Matthew Joseph
- 5 years ago
- Views:
Transcription
1 SV60 Safety valves for use with steam, gas and liquids
2 Spirax Sarco safety valves - protecting people, plant and profit The SV60 spring loaded full lift safety valve range from Spirax Sarco has been designed to protect against excess pressure across a broad spectrum of industrial processes. Suitable for use with steam, gas and liquids, the SV60 safety valves provide a comprehensive and competitive solution to most applications, including the protection of steam boilers, pipeline and pressure vessels, compressors and receivers and most general industrial service applications. The safety valves are simple in design and available with inlet sizes of DN20 to DN150, and are suitable for set pressures up to 40 bar. people A company's most valued asset is secure in the knowledge that their safety has been put first Protecting plant Safeguard plant against major damage from excess pressure and ensure continued efficient operation profit Major shutdowns interfere with production and lose customers. A continuous supply of products protects a company's image and profits Quality comes as standard Safety valves protect people, plant and profit so there should be no compromise on quality when selecting a valve. The SV60 range of safety valves from Spirax Sarco meet the exacting standards laid down by AD-Merkblatt A2 and TRD 421, and their performance has been witnessed and approved by the TÜV. The quality of shut-off tightness is a critical feature of any safety valve and each Spirax Sarco safety valve is tested to enure that the integrity of shut-off complies with the requirements of the American Petrochemical Institute standard API 527. Spirax Sarco is a company of assessed capability to BS EN ISO 9001 Off-the-shelf availability. Compact high flow design. User benefits Wide range with a choice of body materials, bonnets and lever or cap arrangements to meet most application needs. Independently approved performance. API 527 shut-off tightness. Spirax Sarco s guarantee of worldwide technical support, knowledge and service. 2
3 Optional Optional Tamper-proof sealed cap. Easing lever with packing for zero environmental emissions. Chrome vanadium steel spring gives stability at high temperatures and eliminates spring relaxation. Open or closed bonnet options. Hardened stainless steel disc and seat, lapped to optical flatness. ç Choice of flange styles. ç 3
4 Sizing a valve Establish the maximum flowrate This value must be the maximum possible for the system, for example at full boiler load or maximum possible valve capacity. Establish the set pressure The set pressure must be low enough to ensure that the maximum allowable accumulated pressure of the boiler, vessel or system it is protecting, is not exceeded. The set pressure must be high enough to ensure that there is sufficient margin above the normal system operating pressure to allow the valve to close. However, it must be no higher than the maximum allowable working pressure of the system. For safety valves used downstream of pressure reducing valves, it is essential to establish the pressure at no load since this may be significantly higher than the working pressure for a direct acting type valve. Unless operational considerations dictate otherwise, the safety valve set pressure should always be significantly higher than the system operating pressure with plenty of margin allowed for blowdown. There is sometimes a temptation to set a safety valve just above the normal operating pressure, which can lead to poor shut-off and nuisance operation. Select a suitable size safety valve Once the type of safety valve has been selected and the flow and set pressures established, the correct size can be determined. For media such as steam, air and water, published capacity charts are usually quite sufficient to select the correct size safety valve. That is one, whose capacity just exceeds the required capacity at the desired overpressure. Where sizing charts are not available or do not cater for the particular fluid or conditions then the minimum required flow area will need to be calculated and a valve with a larger flow area chosen. For hot water duty where flashing will occur, the capacity charts for water are unsuitable since a percentage of the discharge will be steam and this must be taken into account in the sizing calculation. Typical application Protecting boilers Steam boilers have very specific requirements for safety valve performance. The safety valve is required to ensure overpressure cannot occur in the boiler. 4
5 Capacities SV60 flow capacity for steam kg/h (calculated in accordance with AD-Merkblatt A2 and TRD 421) Valve size DN 20 /32 25/ /50 40/65 50/80 65 /100 80/ / / /250 Orifice (mm) Area (mm²) a w (P > 4 bar) Set pressure (bar g) Flow capacity for steam kg/h SV60 flow capacity for air m 3 /h at 0 C and 1013 mbar (calculated in accordance with AD-Merkblatt A2 and TRD 421) Valve size DN 20 /32 25/ /50 40/65 50/80 65 /100 80/ / / /250 Orifice (mm) Area (mm²) a w (P > 4 bar) Set pressure (bar g) Flow capacity for air m³/h
6 Technical data Model type SV604 SV607 Valve size DN DN DN Connections Materials Inlet PN40 or ANSI 300 PN25 PN16 Outlet PN16 or ANSI 150 PN16 Body and Bonnet Cap Seat Carbon steel SG iron GSC 25 GGG 40.3 SG iron SG iron GGG 40.3 GGG 40.3 Stainless steel Stainless steel Disc Stainless steel Stainless steel Hardened Hardened Body design PN40 PN25 PN16 Set pressure range 0.2 to 40 bar 0.2 to 25 bar 0.2 to 16 bar Limiting Temperature range -10 C to +400 C -10 C to C conditions Chrome-vanadium alloy steel -10 C to +230 C Spring Tungston alloy steel +231 C to +400 C Backpressure, maximum up to 10% of set pressure (gauge) Dimensions and weights (approximate) in mm and kg C B D A Connection Dimensions Weight Flow Ø Inlet Outlet Lift A B C D SV604 SV607 DN20 DN DN25 DN DN32 DN DN40 DN DN50 DN DN65 DN DN80 DN DN100 DN DN125 DN DN150 DN
7 Installation Safety valve mounted with spindle vertical Pipe adequately supported Drain discharge to safe place Continuous fall Drain discharge to safe place When installing safety valves, the following salient points should be observed. If in any doubt contact your Spirax Sarco engineer. n The safety valve should always be fitted with the centre line of the spring housing vertically above the valve. n There should not be any shut-off device on the inlet or outlet of the safety valve. n The discharge pipework must not be smaller in diameter than the valve outlet. n No undue stresses should be imposed on installation which may cause distortion and leakage. n If a rise in the discharge pipework cannot be avoided, a small bore drain should be provided at the point where water could collect, and a drain pipe connected to the valve drain plug. n Discharge pipework should be sized in such a way that built-up back pressure does not exceed 12% of the set pressure. n Spirax Sarco Installation and Maintenance Instructions should be consulted prior to installation. SV60 safety valve selection guide Model type SV60 SV60 Body material 4 = Cast steel 4 7 = SG iron Configuration A = Closed bonnet / easing lever B = Closed bonnet / gas tight cap C = Closed bonnet / packed easing lever D = Open bonnet / easing lever A Seal material S = Stainless steel with chrome-vanadium spring S T = Stainless steel with tungsten alloy spring Inlet connection PN16, PN25, PN40, ANSI 300 PN40 Selection example SV60 4 A S PN40 How to order Example: 1 off Spirax Sarco DN50 SV604AS PN40 inlet with a set pressure of 6 bar 7
8 Spirax Sarco products, service and support A partnership with Spirax Sarco provides knowledge, service and products worldwide for the control and efficient use of steam and other industrial fluids. Technical support Experienced technical engineers are available to assist with the study of plant layout and application problems, leading to the correct sizing and selection of equipment using dedicated software. Spare parts Spare parts and expert advice are provided through a networked organisation at global level, and Spirax Sarco warehouses with local assistance from specialists. Our comprehensive product range includes: l Boiler controls l Flowmeters l Pneumatically and electrically actuated control valves l Pressure reducing valves l Self-acting temperature control valves l Programmable electronic controllers l Pneumatic transmitter controllers l Safety valves l Steam traps After sales service Repairs can be carried out either at the plant or at our central workshops, by expert, highly specialist technicians. Calibrating equipment is a service provided in each of the 39 subsidiaries throughout our worldwide organisation. l Steam trap monitoring systems l Condensate pumps l Flash vessels l Separators l Strainers Training Correct sizing, application and calibration are among the main factors contributing to success in solving control problems. Spirax Sarco offers a worldwide organisation for training at its 35 fully equipped technical training centres. l Stop valves l Check valves l Humidifiers l Complete packaged solutions Some of the products may not be available in certain markets. Spirax-Sarco Limited, Charlton House, Cheltenham, Gloucestershire, GL53 8ER UK. Tel: +44 (0) Fax: +44 (0) Enquiries@SpiraxSarco.com Internet: Copyright 2005 Spirax Sarco is a registered trademark of Spirax-Sarco Limited 8 SB-S13-36 CH Issue 3
SV5 Safety Valve Installation and Maintenance Instructions
3120036/3 IM-S13-12 CH Issue 3 SV5 Safety Valve Installation and Maintenance Instructions 1. General specification 2. Supply 3. Before fitting the valve 4. Installation 5. Damage prevention 6. Commissioning
More informationBlowdown vessels Meeting the requirements of HSE PM60
Blowdown vessels Meeting the requirements of HSE PM60 BDV60 blowdown vessels A complete range of equipment for the safe disposal of boiler blowdown Boiler blowdown Steam boilers must be blown down to remove
More informationSafety Valves. Expertise and solutions for steam, gas and liquid applications MECHANICAL SOLUTIONS
Safety Valves Expertise and solutions for steam, gas and liquid applications MECHANICAL SOLUTIONS s a f e t y v a l v e s o l u t i o n s expert source for all your safety valve needs Spirax Sarco...the
More information756 Safety Relief Valves
756 S a fe t y R e l i e f Va l ve s INTRODUCTION 756 Safety Relief Valves The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both
More informationCAST IRON SAFETY VALVE TYPE 6301
CHARACTERISTICS The 6301 safety valve is dedicated to protect the equipment from potential overpressure. This is an automatic device that closes when the pressure conditions are back to normal. It is a
More information6301 TYPE CAST IRON SAFETY VALVES
Pressure (bar) 6301 TYPE CAST IRON SAFETY VALVES FEATURES The 6301 type safety valve is a device designed to protect installations against possible overpressure. It operates automatically and closes when
More information776 Cryogenic Safety Valve
776 Cryogenic Safety Valve INTRODUCTION 776 Cryogenic Safety Valve The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both plant
More informationPOP Safety Valve. POP Safety Valve INTRODUCTION DEFINITIONS
POP Safety Valve POP Safety Valve INTRODUCTION The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both plant and personnel. Safety
More informationM45 ISO Ball Valve DN25 to 150 Installation and Maintenance Instructions
BAC 13310 IM-P133-42 ST Issue 2 M45 ISO Ball Valve DN25 to 150 Installation and Maintenance Instructions 1. General safety information 2. General product information 3. Installation 4. Commissioning 5.
More informationTD45 Thermodynamic Steam Trap Installation and Maintenance Instructions
0685255/1 IM-P068-47 ST Issue 1 TD45 Thermodynamic Steam Trap Installation and Maintenance Instructions 1 General safety information 2 General product information 3 Installation 4 Commissioning 5 Operation
More informationSCA Series Inverted Bucket Steam Traps
0770050/5 IM-P077-06 ST Issue 5 SCA Series Inverted Bucket Steam Traps Installation and Maintenance Instructions 1. General safety information 2. General product information 3. Installation 4. Commissioning
More informationKBV21i and KBV40i Air Actuated Boiler Blowdown Valves
4059051/1 IM-P405-48 AB Issue 1 KBV21i and KBV40i Air Actuated Boiler Blowdown Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Commissioning
More informationAVS32 Stainless Steel Air Vent for Steam Systems Installation and Maintenance Instructions
1234150/3 IM-P123-17 ST Issue 3 AVS32 Stainless Steel Air Vent for Steam Systems Installation and Maintenance Instructions 1. General safety information 2. General product information 3. Installation 4.
More informationMFP14-PPU (Vented) Automatic Packaged Pump Units
681060/2 IM-P681-02 ST Issue 2 MFP14-PPU (ented) Automatic Packaged Pump Units Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Single MFP14 - PPU installation
More informationAE50S Automatic Air and Gas Vent for Liquid Systems Installation and Maintenance Instructions
0176050/3 IM-P017-11 ST Issue 3 AE50S Automatic Air and Gas Vent for Liquid Systems Installation and Maintenance Instructions 1 General safety information 2 General product information 3 Installation 4
More informationPressure reducing station. ARI-Pressure reducing station, self-acting or with electro-pneumatic control. ARI-PREsys -S. Pressure reducing station
ARI-, self-acting or with electro-pneumatic control ARI-PREsys -S for steam ready for operation self-acting or with electro-pneumatic control Pipe material: P235GH 1.4571/1.4541 Valve materials: EN-JL1040
More informationPressure reducing station. ARI-Pressure reducing station, self-acting or with electro-pneumatic control. ARI-PREsys -S. Pressure reducing station
ARI-, self-acting or with electro-pneumatic control ARI-PREsys -S for steam ready for operation self-acting or with electro-pneumatic control Pipe material: P235GH 1.4571/1.4541 Valve materials: EN-JL1040
More informationKBV21i and KBV40i Key Operated Boiler Blowdown Valves Installation and Maintenance Instructions
4059051/3 IM-P405-48 EMM Issue 3 KBV21i and KBV40i Key Operated Boiler Blowdown Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4.
More informationSRV2S Pressure Reducing Valve
1860050/4 IM-P186-03 CH Issue 4 SRV2S Pressure Reducing Valve Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Maintenance 5. Spare parts
More informationS1, S2, S3, S5, S6, S7, S8, S12 and S13 Separators
0231150/8 IM-P023-55 ST Issue 8 S1, S2, S3, S5, S6, S7, S8, S12 and S13 Separators Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Commissioning
More informationPV4 and PV6 Piston Valves
1181250/1 IM-P118-05 ST Issue 1 PV4 and PV6 Piston Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Commissioning 5. Operation 6.
More informationMSC-P and MSC-N Manifolds for Steam Distribution and Condensate Collection
1170850/1 IM-P117-36 ST Issue 1 MSC-P and MSC-N Manifolds for Steam Distribution and Condensate Collection Installation and Maintenance Instructions 1. Safety information 2. General product information
More informationBTD52L Thermodynamic Steam Trap Installation and Maintenance Instructions
1810050/4 IM-P181-03 ST Issue 4 BTD52L Thermodynamic Steam Trap Installation and Maintenance Instructions 1 General safety information 2 General product information 3 Installation 4 Commissioning 5 Operation
More informationCrosby style JCE Safety Valve Installation, Maintenance and Adjustment Instructions CROSBY
CROSBY Table of contents 1. Installation 1 1.1. Drainage 1 1.2. Discharge pipework 1 1.3. Preparation for installation 1 2. Pressure adjustment 1 3. Maintenance 1 4. Dismantling 1 4.1. All valve types
More informationHM and HM34 Inverted Bucket Steam Traps Installation and Maintenance Instructions
0670350/4 IM-S03-11 ST Issue 4 HM and HM34 Inverted Bucket Steam Traps Installation and Maintenance Instructions 1. Safety information 2. General product information HM Series 3. Installation 4. Commissioning
More informationPressure Reducing Valve for Steam Type 2333 A
Pressure Reducing Valve for Steam Type 2333 A Fig. 1 Type 2333 A 1. Design and principle of operation The pressure reducing valve consists of a balanced control valve and a closing actuator equipped with
More informationCrosby Style JCE Safety Relief Valves provide full overpressure protection for process systems at an affordable cost of ownership.
CROSBY Crosby Style JCE Safety Relief Valves provide full overpressure protection for process systems at an affordable cost of ownership. Design The Crosby Style JCE Safety Relief Valve incorporates a
More informationFV Flash Vessel Installation and Maintenance Instructions
4041050/5 IM-P404-10 EMM Issue 5 FV Flash Vessel Installation and Maintenance Instructions 1. Safety information 2. Specific product safety information 3. Product information 4. Installation 5. Commissioning
More informationThe Crosby Style JCE Safety Relief Valve
s provide full overpressure protection for process systems at an affordable cost of ownership. Features Certified to BS6759 parts 1, 2 and 3 by SAFED. A.D.Merkblatt (TUV Approval). ASME Code Section VIII
More informationCA46S Austenitic Stainless Steel Air and Gas Trap DN40 and DN50
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSi C132. Safety valves for pressure relief in accordance to PED, DIN/EN and ASME. Engineering GREAT Solutions
Safety valves for pressure relief in accordance to PED, DIN/EN and ASME Engineering GREAT Solutions Si C132 Features The universal compact safety valve > 3 body seat sizes for appropriate size selection
More informationM111 Spiraflo Transducer
3309551/ 7 IM-P330-38 MI Issue 7 M111 Spiraflo Transducer Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Technical data 4. Mechanical installation: M111
More informationA3S Bellows Sealed Stop Valve Installation and Maintenance Instructions
1326050/3 IM-P132-11 ST Issue 3 A3S Bellows Sealed Stop Valve Installation and Maintenance Instructions 1 General safety information 2 General product information 3 Installation 4 Commissioning 5 Operation
More informationSpirax Compact FREME Flash Recovery Energy Management Equipment
IM-UK-cFREME UK Issue 1 Spirax Compact FREME Flash Recovery Energy Management Equipment Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4.
More informationPTF4 Pivotrol Pump (patented) version Dual Mechanism - Pressure Powered Pump
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationBCV31 DN20 - Blowdown Control Valve
4034650/8 IM-P403-37 AB Issue 8 BCV31 DN20 - Blowdown Control Valve Installation and Maintenance Instructions 1. Safety information 2. Application 3. Technical data 4. Operation 5. Installation 6. Flow
More informationDF1 and DF2 Diffusers
1550650/4 IM-P155-07 ST Issue 4 and Diffusers Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Commissioning 5. Operation 6. Maintenance
More informationDri-Line Mk3 Monnier Compressed Air Drain Trap
5044050/2 IM-P504-24 CH Issue 2 Dri-Line Mk3 Monnier Compressed Air Drain Trap Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation and Operation
More informationTD62LM and TD62M Thermodynamic Steam Traps with Replaceable Seats
0686550/4 IM-P068-58 ST Issue 4 TD62LM and TD62M Thermodynamic Steam Traps with Replaceable Seats Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation
More informationTD10, TD52M and TD259 Thermodynamic Steam Traps Installation and Maintenance Instructions
6875/3 IM-P68-31 ST Issue 3 TD1, TD52M and TD259 Thermodynamic Steam Traps Installation and Maintenance Instructions 1 General safety information TD1 2 General product information 3 Installation 4 Commissioning
More informationFig 1, Fig 12, Fig 13, Fig 14, Fig 16 and Fig 16L Strainers Installation and Maintenance Instructions
16355/5 IM-S6-17 ST Issue 5 Fig 1, Fig 12, Fig 13, Fig 14, Fig 16 and Fig 16L Strainers Installation and Maintenance Instructions 1 General safety information 2 General product information 3 Installation
More informationManual Actuated Boiler Blowdown Valves
Manual Actuated Boiler Blowdown Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Operation 5. Maintenance 6. Spare parts p.1 1. Safety
More informationBRV71 and BRV73 Pressure Reducing Valves
2103050/4 IM-P210-04 CH Issue 4 BRV71 and BRV73 Pressure Reducing Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Start-up and adjustment
More informationG type DUCTED EXHAUST SAFETY VALVE 2871 AND 288X SERIES. Model/Ref:
Model/Ref: 28713 www.lauridsenindustri.com CHARACTERISTICS The G type safety valves are dedicated to protect the equipment from potential overpressure. They are automatic and close when the pressure conditions
More informationInstallation, Operating and Maintenance Instructions. V914 Cast Iron Flanged Swing Check Valve V914
Installation, Operating and Maintenance Instructions V914 Cast Iron Flanged Swing Check Valve V914 THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC and CE MARKING The Pressure Equipment Regulations 1999 (SI 1999/2001)
More informationPRESSURE REDUCING VALVE RP45 (EN)
PRESSURE REDUCING VALVE RP45 (EN) DESCRIPTION The ADCA RP45 series pressure reducing valves are single seat bellows sealed controllers, operating without auxiliary energy, designed for use on steam, compressed
More informationS and SF Inverted Bucket Steam Traps
0772150/6 IM-P077-02 ST Issue 6 S and SF Inverted Bucket Steam Traps Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Commissioning 5. Operation
More informationTDC46M, TDS46M and UTDS46M Thermodynamic Steam Traps with Maintainable Seat Installation and Maintenance Instructions
1870050/7 IM-P187-05 CMGT Issue 7 TDC46M, TDS46M and UTDS46M Thermodynamic Steam Traps with Maintainable Seat Installation and Maintenance Instructions TDC46M and TDS46M UTDS46M 1. Safety information 2.
More informationDCV6 Disc Check Valve
1342050/6 IM-P134-22 ST Issue 6 DCV6 Disc Check Valve Installation and Maintenance Instructions Printed IM-P134-22 in the UK ST Issue 6 Copyright 20101 Safe operation of this product can only be guaranteed
More informationSafety Valves. Product Information. It s all at Albion
Safety Valves Product Information It s all at Albion ART 642 Gunmetal Safety Valve Features Screwed BSP Parallel (ISO 228) Body Gunmetal Suitable for Gases, Liquids & Steam Fitted with Diaphragm to Protect
More informationS1, S2, S3, S5, S6, S7, S8, S12 and S13 Separators Installation and Maintenance Instructions
PREVIOUS REFERENCE NO. IMP02355 0231150/13 IMF0501ENISS2 CMGT S1, S2, S3, S5, S6, S7, S8, S12 and S13 Separators Installation and Maintenance Instructions 1. Safety information 2. General product information
More informationTA10A and TA10P Steam Tracing Temperature Control Valves Installation and Maintenance Instructions
3500032/2 IM-P350-02 CH Issue 2 TA10A and TA10P Steam Tracing Temperature Control Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4.
More informationDCV1, DCV3 and DCV3LT Disc Check Valves Installation and Maintenance Instructions
1340050/7 IM-P134-07 CMGT Issue 7 DCV1, DCV3 and DCV3LT Disc Check Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Commissioning
More informationThermocirc Installation and Maintenance Instructions
1570072/2 IM-P157-36 ST Issue 2 Thermocirc Installation and Maintenance Instructions 1 General safety information 2 General product information 3 Installation 4 Commissioning 5 Operation 6 Maintenance
More informationUSM21 Sealed Bimetallic Steam Trap for use with Pipeline Connectors Installation and Maintenance Instructions
6250250/1 IM-P625-03 ST Issue 1 USM21 Sealed Bimetallic Steam Trap for use with Pipeline Connectors Installation and Maintenance Instructions 1. General safety information 2. General product information
More informationWater. VAG DUOJET Automatic Air Valve Single-chamber type PN 10/16/25/40 - DN KAT-A 1912
Water VAG DUOJET Automatic Air Valve Single-chamber type Product characteristics and benefits Resilient seated With flange end acc. to EN 1092-2 Single chamber air valve in compact design Very high discharge
More informationCLASS TLP Pressure Reducing Valve
CLASS TLP Pressure Reducing Valve CLASS TLP Direct Acting Pressure Reducing Valve The Class TLP balanced direct acting pressure regulator is designed for use on installations that have varying inlet pressures
More informationBACK PRESSURE / SUSTAINING
In many liquid piping systems, it is vital that line pressure is maintained within relatively narrow limits. This is the function of the 108 Pressure Relief / Back Pressure Series of the OCV control valves.
More informationBACK PRESSURE / SUSTAINING
SPECIFICATIONS DIMENSIONS In many liquid piping systems, it is vital that line pressure is maintained within relatively narrow limits. This is the function of the 108 Pressure Relief / Back Pressure Series
More informationTW Temperature Control Valve
0470050/6 IM-P047-04 CH Issue 6 TW Temperature Control Valve Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Maintenance 5. Spare parts
More informationIX1 Spirax-Monnier International Compressed Air Filter Installation and Maintenance Instructions
0575050/2 IM-P057-04 CH Issue 2 IX1 Spirax-Monnier International Compressed Air Filter Installation and Maintenance Instructions 1 Safety information 2 General product information 3 Installation and commissioning
More informationTSS21 Sealed Thermostatic Steam Tracer Trap
1255050/4 IM-P125-10 ST Issue 4 TSS21 Sealed Thermostatic Steam Tracer Trap Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Commissioning
More informationFT16 Ball Float Steam Trap Installation and Maintenance Instructions
1430050/1 IM-P143-04 ST Issue 1 FT16 Ball Float Steam Trap Installation and Maintenance Instructions 1 General safety information 2 General product information 3 Installation ½" and ¾" shown 4 Commissioning
More informationM33F ISO, M33S ISO and M33V ISO Ball Valves Installation and Maintenance Instructions
BAC13365 IM-P133-65 CMGT Issue 2 M33F ISO, M33S ISO and M33V ISO Ball Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Commissioning
More informationBall Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300 DN 40, 50, 65
Data Sheet 819346-02 Issue Date: 05/17 Ball Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300, 50, 65 UNA 45hl MAX, UNA 46hl MAX, UNA 46Ahl MAX UNA 45v MAX with cover for mounting electrode
More informationBall Float Steam Trap UNA 43 PN 16/CL 125/JIS 10K UNA 46 PN 40/CL 150/CL 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6"
Data Sheet 819584-00 Issue Date: 01/17 Ball Float Steam Trap UNA 43 PN 16/C 125/JIS 10K UNA 46 PN 40/C 150/C 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6" UNA 43 hl, UNA 46 hl UNA 43 v, UNA 46 v with
More informationGUIDANCE IN-SERVICE INSPECTION PROCEDURES
GUIDANCE IN-SERVICE INSPECTION PROCEDURES Number: PEC 13 Prepared by: Pressure Equipment Committee (TC1) Status: Issue: 07 Date: 16 th January 2018 Reference: Guidance for safety valve examination. SITUATION:
More informationPressure Reducing Valve for steam RP 45
Pressure Reducing Valve for steam RP 45 DESCRIPTION The RP45 series pressure reducing valves are single seat bellows sealed controllers, operating without auxiliary energy,designed for use on steam, compressed
More informationPressure Reducing Valves Pressure Reducing with. Broady Flow Control. D Series Range. Pressure Reducing Valves. Broady Flow Control
Pressure Reducing Valves 00 Pressure Reducing with Broady Flow Control D Series Range Pressure Reducing Valves Broady Flow Control The Company Broady Flow Control is an Independent Valve Manufacturer,
More informationBSA6T and BSA64T Stainless Steel Bellows Sealed Stop Valves Installation and Maintenance Instructions
1843950/3 IM-P184-03 ST Issue 3 BSA6T and BSA64T Stainless Steel Bellows Sealed Stop Valves Installation and Maintenance Instructions 1. General safety information 2. General product information 3. Installation
More informationFig 3, 7, 33, 34, 34HP, 36, 36HP, 37, 3616 and Fig 3716 Flanged Strainers
16352/8 IM-S6-18 ST Issue 8 Fig 3, 7, 33, 34, 34HP, 36, 36HP, 37, 3616 and Fig 3716 Flanged Strainers Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation
More informationPressure & Flame Protection
Pressure & Flame Protection Safety & Regulating Valves Safety and Regulating Valves SAFETY RELIEF VALVES Bailey safety relief valves offer a broad spectrum of protection against over-pressure for vital
More informationFig 7, 33, 33.1, 34, 34HP, 36, 36HP, 37, 3616 and Fig 3716 Flanged Strainers Installation and Maintenance Instructions
16352/11 IM-S6-18 ST Issue 11 Fig 7, 33, 33.1, 34, 34HP, 36, 36HP, 37, 3616 and Fig 3716 Flanged Strainers Installation and Maintenance Instructions 1. Safety information 2. General product information
More informationRate of Flow Valve Series 120
SPECIFICATIONS Rate of Flow Valve Series DIMENSIONS The OCV Series 120 Rate of Flow control valve is designed to control or limit flow to a predetermined rate, regardless offl uctuations in downstream
More informationDCV10 Stainless Steel Disc Check Valve for use with Condensate Pumps
6018050/1 IM-P601-33 ST Issue 1 DCV10 Stainless Steel Disc Check Valve for use with Condensate Pumps Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation
More informationDri-Line Mk2 Spirax-Monnier Compressed Air Drain Trap
0509950/2 IM-P050-21 CH Issue 2 Dri-Line Mk2 Spirax-Monnier Compressed Air Drain Trap Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation and
More information3-way control valves VK 3
Data sheet 3-way control valves VK 3 Description / Application VK 3 valves are a range of 3 port high specification flanged valves for chilled water, LPHW, MPHW, HPHW (low, medium or high pressure hot
More informationFig 1, Fig 12, Fig 13, Fig 14HP, Fig 16, Fig 16HP and Fig 16L Strainers
16355/8 IM-S6-17 ST Issue 8 Fig 1, Fig 12, Fig 13, Fig 14HP, Fig 16, Fig 16HP and Fig 16L Strainers Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation
More informationAVC32 Carbon Steel Air Vent for Steam Systems
1234050/4 IM-P123-14 ST Issue 4 AVC32 Carbon Steel Air Vent for Steam Systems Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Commissioning
More informationContents. LWN edition:
Contents 2.1 Introduction...2.1-1 2.2 Loading Principle...2.2-1 2.3 Primary / Secondary Pressure Zone...2.3-1 2.3.1 Nominal Sizes Inlet and Outlet...2.3-2 2.3.2 Angle Type Body...2.3-2 2.4 Vessel Connections...2.4-1
More informationCash Valve TYPE KP PILOT OPERATED BACK PRESSURE VALVE. ISSUED - DECEMBER 2000 CAVMC-0518-US-0208 ISO 9001 Certified
Cash Valve PILOT OPERATED BACK PRESSURE VALVE ISSUED - DECEMBER 2000 CAVMC-0518-US-0208 ISO 01 Certified KP HIGH CAPACITY PILOT OPERATED BACK PRESSURE VALVE DESCRIPTION The Cash Valve Type KP is a pilot
More informationFTGS14 Ball Float Steam Trap DN15 (½") to DN25 (1")
1458050/5 IM-P145-12 ST Issue 5 FTGS14 Ball Float Steam Trap DN15 (½") to DN25 (1") Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Commissioning
More informationBCV31 DN40 - Blowdown Control Valve
4034850/5 IM-P403-71 AB Issue 5 BCV31 DN40 - Blowdown Control Valve Installation and Maintenance Instructions 1. Safety information 2. Application 3. Technical data 4. Operation 5. Installation 6. Flow
More informationSA Control Valve types: BM, BMF, BX, SB, NS, KA, KB, KC (Normally open) BMRA, BMFRA, BXRA, SBRA, NSRA, KX, KY (Normally closed)
0366055/7 IM-S21-01 CH Issue 7 SA Control Valve types: BM, BMF, BX, SB, NS, KA, KB, KC (Normally open) BMRA, BMFRA, BXRA, SBRA, NSRA, KX, KY (Normally closed) Installation and Maintenance Instructions
More informationTD62LM and TD62M Thermodynamic Steam Traps with Replaceable Seats Installation and Maintenance Instructions
PREVIOUS REFERENCE NO. IM-P068-58 0686550/5 IM-P015-04-EN-ISS2 CMGT TD62LM and TD62M Thermodynamic Steam Traps with Replaceable Seats Installation and Maintenance Instructions 1. Safety information 2.
More informationCA44 and CA44S Carbon Steel Air and Gas Traps Flanged DN15 to DN25
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationMF2M Monnier Miniature Compressed Air Filter
5040050 / 2 IM-P504-02 CH Issue 2 MF2M Monnier Miniature Compressed Air Filter Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation and commissioning
More informationIP2, IP2A and IP2D. Spirax-Monnier International Compressed Air Filter/ Regulators
Page 1 of 6 TI-P510-01 H Issue 5 IP2, IP2 and IP2D ISO 9001 Spirax-Monnier International ompressed ir Filter/ Regulators ert. No. LRQ 0963008 Description The IP range of Spirax-Monnier international compressed
More informationSafety valves Index. Pressure reducing valves and safety valves FC-001 page 530
Index General information page Introduction 531 General information 532 Design features and accessories 535 Installation and operating instructions 540 Product information Weight-loaded page DIN flanges
More informationSpiratec ST14, ST16 and ST17 Sensor Chambers and sensors
0862050/1 IM-P086-18 MI Issue 1 Spiratec ST14, ST16 and ST17 Sensor Chambers and sensors Installation and Maintenance Instructions 1. Safety Information 2. General product information 3. Installation 4.
More informationMounting and Operating Instructions EB 3007 EN. Self-operated Pressure Regulators. Differential Pressure Regulators (opening) Type Type 42-25
Self-operated Pressure Regulators Differential Pressure Regulators (opening) Type 42-20 Type 42-25 Type 42-20 Differential Pressure Regulator Type 42-25 Differential Pressure Regulator Mounting and Operating
More informationWhat is pressure relief valve? Pressure relief valve
What is pressure relief valve? Pressure relief valve What is: Relief valve Safety valve Safety relief valve Type of pressure relief valve Pressure relief valve sizing base What are the sizing basis of
More informationBT6HC Hygienic Sanitary Balanced Pressure Steam Trap for High Capacity and CIP/SIP Applications
1800350/6 IM-P180-12 ST Issue 6 BT6HC Hygienic Sanitary Balanced Pressure Steam Trap for High Capacity and CIP/SIP Applications Installation and Maintenance Instructions 1. Safety information 2. General
More informationIFTGS14 Ball Float Steam Trap ½" and ¾" with Integral Spiratec Sensor
6150350/3 IM-P615-12 ST Issue 3 IFTGS14 Ball Float Steam Trap ½" and ¾" with Integral Spiratec Sensor Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation
More informationCA44, CA44S, CA46 and CA46S Air and Gas Traps
1484450/3 IM-P148-37 ST Issue 3 CA44, CA44S, CA46 and CA46S Air and Gas Traps Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Commissioning
More informationMPC1M, MPC2M and MPC2AM Monnier High Efficiency Compressed Air Filter / Regulators
5043150 /2 IM-P504-08 CH Issue 2 MPC1M, MPC2M and MPC2AM Monnier High Efficiency Compressed Air Filter / Regulators Installation and Maintenance Instructions 1. Safety information 2. General product information
More informationPressure Reducing Valves Pressure Reducing with. Broady Flow Control. C Series Range. Pressure Reducing Valves. Broady Flow Control
Pressure Reducing Valves 00 Pressure Reducing with Broady Flow Control C Series Range Pressure Reducing Valves Broady Flow Control The Company Broady Flow Control is an Independent Valve Manufacturer,
More informationFT53, IFT53, FT54, IFT54, FT57 and IFT57 Ball Float Steam Traps - DIN
6030050/6 IM-P603-03 ST Issue 6 FT53, IFT53, FT54, IFT54, FT57 and IFT57 Ball Float Steam Traps - DIN Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 400 Flanges GN10/16-10 C + 120 C Max Pressure : 16 Bars up to DN 200 ( 10 bars over ) Specifications : Removable stainless steel filter Bolted
More informationEaton Filtration, LLC
Eaton Filtration, LLC 900 Fairmount Avenue, Elizabeth, NJ 07207 Phone: 908-787-1000 Fax: 908-351-7893 E-Mail: filtration@eaton.com Web: www.filtration.eaton.com Installation, Operation & Service Manual
More information