RUBBER EXPANSION JOINTS
|
|
|
- Debra Marsh
- 5 years ago
- Views:
Transcription
1 RUBBER EXPANSION JOINTS SPOOL-TYPE STANDARD ARCH 150, 200, 200XL The heavy duty proven "industry work horse" Time tested performer Fabric and steel reinforced Constructed for maximum strength and reliability. Available in multi- arch, taper, offset and special constrictions SUPER-FLEX WIDE ARCH DESIGN 1000, 1100, 1200 Twice the movement capabilities than standard arch Lower spring rates required for movement Fabric and steel reinforced Suitable for pressures up to 200 PSI and vacuum service Available in multi- arch, offset and special constructions LIGHTWEIGHT APPLICATION DESIGN - STYLE 189 Lightweight construction Low spring rate forces Can be built to handle temperatures up to 350ºF Less force to move; allows maximum movements Available in multi- arch, taper, offset and for high temperature applications SPHERICAL DESIGN - STYLE 800, 802, 803 Minimizes water hammer and hydraulic shock Less force to move; allows maximum movements "All- in- one" design eliminates the need for retaining rings Available in Twin Sphere design for greater movement capabilities Floating flange design provides easy installation FLUE DUCT and NAVY FAN CONNECTORS - Style 600 Designed to absorb thermal movements and sound vibrations Liners and insulation can allow temperatures to 500ºF Suitable for Flue Duct Applications Available in multiple arch, taper, offset and special constructions Custom Drilled or un- drilled For more information on Rubber Expansion Joints, please refer to our PRODUCTS section - EXPANSION JOINTS 7635 RONSON ROAD SAN DIEGO, CALIFORNIA TEL: FAX: sales@sandiegoseal.com VISIT US AT:
2 Rubber Types SDSI uses varying rubber types. Selecting the right polymer base is important to each project. Our experienced staff works with you to determine what type of rubber works best for your application. Neoprene (Chloroprene) Good general purpose rubber with properties close to natural rubber, but is synthetically produced Better resistance to oils and solvents compared to natural rubber but similar low compression set Can be compounded for flame resistance Good weathering resistance Poorer low temperature performance compared to natural rubber Not good in applications with concentrated acids or alkalis Maximum continuous operating temperature is about 275 F Nitrile (Buna) Much better oil and solvent resistance compared to either natural rubber or Neoprene Recommended for most oil field applications Can be formulated for use at low temperatures Good compression set and abrasion resistance, but poor weathering resistance Can be used with concentrated acids and alkalis but there are better alternatives Maximum continuous operating temperature is about 275 F HNBR (Hydrogenated Nitrile) Similar to Nitrile but with improvements in heat and ozone resistance Can be formulated for low temperature applications Excellent for oil field service Usually not recommended in applications with concentrated acids or alkalis Very high cost Maximum continuous operating temperature is about 350 F EPDM Exceptional resistance to weathering and ozone Excellent resistance to water, most gases, steam, and heat aging Good for exposure to concentrated acids and alkalies, but not recommended for exposure to oils and solvents Maximum continuous operating temperature is about 350 F
3 FKM (Viton ) High cost, but high performance material Outstanding resistance to most chemicals, oils and solvents Good oxidation and ozone resistance Maximum continuous operating temperature is about 650 F Viton is a trademark of DuPont and signifies material produced by DuPont Styrene Butadiene (SBR) Originally developed as a low cost substitute for natural rubber Good water resistance and abrasion resistance Poor weathering resistance, but can overcome with specific raw materials Not recommended for contact with oils and solvents Not used with concentrated acids or alkalis Maximum continuous operating temperature is about 225 F Natural Rubber The raw material to make natural rubber actually does come from trees Produces compounds with high tensile strength, tear strength, tear and abrasion resistance Can be used at lower temperatures, low compression set, and high resilience Not recommended for severe applications with oil and solvent exposure; subject to aging by sun, ozone, and heat Also not good for applications in contact with concentrated acids or alkalis Maximum continuous operating temperature is about 225 F Butyl Very good resistance to most gases including air highly resistant to ozone and weathering Abrasion resistance close to natural rubber and good for concentrated acids and alkalis Not recommended for petroleum product exposure Maximum continuous operating temperature is about 300 F AFLAS Similar to FKM, but with improved steam aging resistance Lower overall temperature resistance Very costly and seldom used except in very specific oil field applications Maximum continuous operating temperature is about 450 F
4 EXPANSION JOINT DIMENSION CHART LB. COMMERCIAL DRILL Nominal *FACE to FLANGE Bolt Number of Diameter of Pipe Size FACE O.D. Circle Bolt Holes Bolt Holes 1/2" 6 3 1/2" 2 3/8" 4 5/8" 3/4" 6 3 7/8" 2 3/4" 4 5/8" 1" 6 4 1/4" 3 1/8" 4 5/8" 1 1/4" 6 4 5/8" 3 1/2" 4 5/8" 1 1/2" 6 5" 3 7/8" 4 5/8" 2" " 4 3/4" 4 3/4" 2 1/2" " 5 1/2" 4 3/4" 3" /2" 6" 4 3/4" 3 1/2" /2" 7" 8 3/4" 4" " 7 1/2" 8 3/4" 5" " 8 1/2" 8 7/8" 6" " 9 1/2" 8 7/8" 8" /2" 11 3/4" 8 7/8" 10" " 14 1/4" 12 1" 12" " 17" 12 1" 14" " 18 3/4" /8" 16" /2" 21 1/4" /8" 18" " 22 3/4" /4" 20" /2" 25" /4" 22" /2" 27 1/4" /8" 24" " 29" /8" 26" /4" 31 3/4" /8" 28" /2" 34" /8" 30" /4" 36" /8" 32" /4" 38 1/2" /8" 34" /4" 40 1/2" /8" 36" " 42 3/4" /8" 38" /4" 45 1/4" /8" 40" /4" 47 1/4" /8" 42" " 49 1/4" /8" 44" /4" 51 3/4" /8" 46" /4" 53 3/4" /8" 48" /2" 56" /8" FACE to FACE DIMENSION FLANGE O.D. NOMINAL PIPE DIAMETER BOLT CIRCLE *STANDARD FACE TO FACE DIMENSIONS IF SIZE OTHER THAN ON CHART PLEASE CONTACT SALES
5 EXPANSION JOINT DIMENSION CHART LB. COMMERCIAL DRILL Nominal *FACE to FLANGE Bolt Number of Diameter of Pipe Size FACE O.D. Circle Bolt Holes Bolt Holes 1" 6 4 7/8" 3 1/2" 4 3/4" 1 1/4" 6 5 1/4" 3 7/8" 4 3/4" 1 1/2" 6 6 1/8" 4 1/2" 4 7/8" 2" 6 6 1/2" 5" 8 3/4" 2 1/2" 6 7 1/2" 5 7/8" 8 7/8" 3" /4" 6 5/8" 8 7/8" 3 1/2" " 7 1/4" 8 7/8" 4" " 7 7/8" 8 7/8" 5" " 9 1/4" 8 7/8" 6" /2" 10 5/8" 12 7/8" 8" " 13" 12 1" 10" /2" 15 1/4" /8" 12" /2" 17 3/4" /4" 14" " 20 1/4" /4" 16" /2" 22 1/2" /8" 18" " 24 3/4" /8" 20" /2" 27" /8" 22" " 29 1/4" /8" 24" " 32" /8" 26" /4" 34 1/2" /8" 28" /4" 37" /8" 30" " 39 1/4" /8" 32" /4" 41 1/2" /8" 34" /2" 43 1/2" /8" 36" " 46" /8" 38" /4" 48" /8" 40" /2" 50 1/4" /8" 42" " 52 3/4" /8" 44" /4" 55" /8" 46" /2" 57 1/4" /8" 48" " 60 3/4" /8" FACE to FACE DIMENSION FLANGE O.D. NOMINAL PIPE DIAMETER BOLT CIRCLE *STANDARD FACE TO FACE DIMENSIONS IF SIZE OTHER THAN ON CHART PLEASE CONTACT SALES
6 EXPANSION JOINT DIMENSION CHART - NAVY DRILL Nominal *FACE to FLANGE BOLT Number of Diameter of Pipe Size FACE O.D. CIRCLE Bolt Holes Bolt Holes 1/2" 6 3 9/16" 2 7/16" 3 9/16" 3/4" /16" 2 11/16 4 9/16" 1" 6 4 1/4" 3 1/8" 4 9/16" 1 1/4" 6 4 1/2" 3 3/8" 4 9/16" 1 1/2" 6 5 1/16" 3 15/16" 6 9/16" 2" /16" 4 7/16" 6 9/16" 2 1/2" /8" 5" 6 9/16" 3" /8" 5 1/2" 8 9/16" 3 1/2" /16" 6 1/16" 8 9/16" 4" /16" 6 9/16" 8 9/16" 5" /16" 7 13/16" 10 11/16" 6" /8" 8 7/8" 12 11/16" 8" /8" 11 1/16" 14 11/16" 10" " 13 7/16" 15 13/16" 12" /8" 16 1/16" 18 13/16" 14" /8" 17 3/8" 19 15/16" 16" /16" 19 7/8" 20 15/16" 18" /4" 21 1/2" 22 15/16" 20" /16" 23 13/16" /16" 22" /8" 25 7/8" /16" 24" " 28" /16" 26" /16" 30 5/16" /16" 28" /16" 32 7/16" /16" 30" /16" 34 9/16" /16" 32" " 36 3/4" /16" 34" " 38 3/4" /16" 36" /8" 41 3/8" /16" 38" /8" 43 3/8" /16" 40" /8" 45 3/8" /16" 42" /4" 47 3/4" /16" 46" /2" 52" /16" 12-Oct *STANDARD FACE TO FACE DIMENSIONS IF SIZE 12-Oct OTHER THAN ON CHART PLEASE CONTACT SALES FACE to FACE DIMENSION FLANGE O.D. NOMINAL PIPE DIAMETER BOLT CIRCLE
Material Handling Hose
Novaflex 5000 Slurry King Hose Pure Gum Liner Tough, versatile alternative to inflexible, cumbersome steel tubing. The easy handling and reusable quick-fastening flange system make installation a snap.
Material Handling Hose
Novaflex 5000 Slurry King Pure Gum Liner Tough, versatile alternative to inflexible, cumbersome steel tubing. The easy handling and reusable quick-fastening flange system make installation a snap. Absorbs
Flexible Metal Hose Products
Flexible Metal Hose Products Specialty Flexible Hose Solutions of Stainless Steel The AEROCOM Advantage Aerocom offers engineered solutions that address specific flexible piping challenges such as vibration,
U-CUP SELECTION GUIDE
U-CUP SELECTION GUIDE ISO 9001 REGISTERED CONTENTS Introduction 1 Seal Selection 2 Profiles 3 Part Numbering 4 Specifying A Seal 5 Gland Dimensions vs Seal Dimensions 6 Design Criteria 7 Design Criteria
...vibration isolation. Materials Handling - Rollers
...vibration isolation Materials Handling - Technical Information from Anti-Vibration Components Solid have a smooth surface and a solid body Durasoft have a smooth contact surface with teardrop holes
Inline Swivels Switch Your Swivel!
Inline Swivels Switch Your Swivel! HOW TO ORDER BODY OPTIONS 9 SS 8 FP 50 X FP 50 Z - V SS-SINGLE PLANE DP- DUAL PLANE SERIES ( ) THREAD SIZE MULTIPLES OF 100 FOR N.P.T.F. MULTIPLES OF 16 FOR J.I.C., O.R.B.
Unit 1, Fullerton Road Rotherham S60 1DJ. Tele: Fax:
Unit 1, Fullerton Road Rotherham S60 1DJ Tele: 0845 601 333 6 Fax: 0845 601 333 7 info@fabricatedproducts.co.uk www.fabricatedproducts.co.uk Data Sheet 6.0 Rubber Pump Flexes All rubber bellows are suitable
609W (Dry Cement Delivery) (Specification 3129F, 3129H, 3129L)
1/8" Tube Thickness (3129L) 609W (Dry Cement Delivery) (Specification 3129F, 3129H, 3129L) Per 3 76.2 3.47 88.1 40.28 36.0 914 1.30.59 100 ft. X 3129-0660 $26.01 4 101.6 4.47 113.5 40.28 48.0 1219 1.71.78
Guide for Evaluating Your Hose Assembly Supplier
Guide for Evaluating Your Hose Assembly Supplier Supplier Evaluation Checklist, and How to Clearly Define Application Requirements Safe, reliable hose assemblies require appropriate specification work
SERIES CVII AWWA C508 RUBBER FLAPPER CHECK VALVES 2-24
SERIES CVII AWWA C508 RUBBER FLAPPER CHECK VALVES 2-24 508-103 Dec 2017 Rubber Flapper Check Valves to AWWA C508 SIMPLE ROBUST DESIGN With only a single moving part there are no packings, o-rings, hinges,
PRESSURE REGULATORS UPSTREAM DIFFERENTIAL PRESSURE. APPLICATION: For maintaining a constant differential pressure across meter.
PRESSURE REGULATORS UPSTREAM DIFFERENTIAL PRESSURE APPLICATION: For maintaining a constant differential pressure across meter. PRESSURE RANGE: Steel: 10 psig to 300 psig CAPACITY: Refer to Table of Contents.
DREDGING & MINING MEDIUM DUTY ABRASIVES HANDLING HOSE
MEDIUM DUTY ABRASIVES HANDLING HOSE A16, A17, A18, A25, A32, A39 Hand-built hard wall suction hose. Animal feeds, grains, flours, powders, cement, sand, dry waste, rubble. 51mm (2 ) to 254mm (10 ) 12 metres.
pipe connectors. General description of pipe connectors Development/Design Purpose Versions
Pipe connectors General description of pipe connectors 1 STFLEX pipe connectors, just like STFLEX rubber expansion joints, have been used for more than years as the preferred connection elements in appliance
Application Data Important Safety Information
Important Safety Information Read this page before using any of the information in this catalog. This catalog is designed to be used as a guide in selecting the proper hose for the applications listed
A Proven Leader In Flexible Piping Technology. Rubber Expansion Joints Engineered Solu ons For Pipe Mo on.
A Proven Leader In Flexible Piping Technology Rubber Expansion Joints Engineered Solu ons For Pipe Mo on www.thorburnflex.com Thorburn s 50 years of experience in the designing and manufacturing of elastomeric
BUTTERFLY VALVES. Toll Free (877) - ICFLUID -2-
BUTTERFLY VALVES 1. General HyrdoWer is a globally recognized manufacturer of power unit accessories. They have become specialists in the design of Butterfly Valves and Hydraulic Compensators. The shut
Rubber-metal-buffers
Rubber-metal-buffers M-1 Rubber-metal-buffers Our delivery program: 1. Rubber-buffer-program 2. Rubber-moulded parts according to drawing 3. Rubber-metal-moulded parts according to drawing 4. Metalparts
GUKO FDA. einfach. gut. beraten.
GUKO FDA Size : Ends : Min Temperature : Max Temperature : DN 25 to 300 Flanges PN10/16-25 C + 90 C Max Pressure : 16 Bars Specifications : Absorb vibrations and noise Linear and angular compansion Inner
Industrial Hose Products
Industrial Hose Products QRG 4800 Quick Reference Guide Your Job. Our Hose. Your Job. Our Hose. No matter what the application, Parker Industrial Hose Products provide proven hose systems designed to efficiently
Ford Service Saddles and Tapping Sleeves
Section AA 5/2001 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487
Solid Roller stud mount
Solid Roller stud mount 60624 Material, urethane or neoprene bonded to a steel insert. Hardness from 20-80 durometer (Shore A). Technical Notes Bearings included (held in place with snap rings). For more
Industry Guidelines POLYETHYLENE (PE) PIPES AND FITTINGS FOR COMPRESSED AIR ISSUE 6.8
Industry Guidelines POLYETHYLENE (PE) PIPES AND FITTINGS FOR COMPRESSED AIR ISSUE 6.8 Ref: POP002 19 APR 2009 Disclaimer In formulating this guideline PIPA has relied upon the advice of its members and,
Materials : Dichromate zinc plated steel flanges or AISI 316
Size : Ends : Min Temperature : Max Temperature : DN 25 to 300 Flanges PN10/16-35 C + 90 C Max Pressure : 16 Bars (10 bars at 90 C) Specifications : Absorb vibrations and noise Linear and angular compansion
O-Rings and Seals - Order Today, SHIP TODAY at O-Rings and Seals
O-Rings and Seals N O-Ring Face Seal Metric O-Ring ORFS O-Ring N4 Metric Retaining Ring XO O-Ring O-Ring N4 Port Ends SAE, Metric,, JIS, K4 Retaining Ring SAE O-Ring N4 EOlastic Seal Ring ISO 6149 O-Ring
Materials : Dichromate zinc plated steel flanges
Size : Ends : Min Temperature : Max Temperature : DN 25 to 300 Flanges PN10/16-35 C + 130 C Max Pressure : 16 Bars up to DN150, 10 bars over Specifications : Absorb vibrations and noise Linear and angular
STAINLESS STEEL DESIGN & INSTALLATION GUIDE
STAINLESS STEEL DESIGN & INSTALLATION GUIDE STAINLESS STEEL TUBE AND PRESS FIT SYSTEM FOR WATER, GAS AND INDUSTRY KEMBLA STAINLESS TUBE AND KEMPRESS STAINLESS FITTINGS, OFFERING ALL OF THE BENEFITS OF
DuPont Kalrez. Oil and Gas Product Selector Guide. Technical Information April 2017
DuPont Kalrez Oil and Gas Product Selector Guide Technical Information April 2017 DuPont has more than 30 years of experience providing perfluoroelastomer seals to the oil and gas industry. Over this time,
INSTALLATION & MAINTENANCE INSTRUCTIONS - ORIGINAL VERSION AVK KNIFE GATE VALVES
1. INTRODUCTION The AVK knife gate valve is a unique, patented, bi-directional on-off valve that ensures a bubble-tight shut off. The valve is available with body of ductile iron and seat of nitrile, viton,
AWWA C504 COMPLIANT VALVES FROM 3 THRU 108
AWWA C504 COMPLIANT VALVES FROM 3 THRU 108 PO Box 411 Berwick PA 18603 800-247-VALV www.crispinvalve.com 500 SERIES: Sizes 3-20 Available The K-Flo 500 Series is a heavy-duty resilient seated butterfly
Threaded Closures Installation, Operation & Maintenance
Howard Street Bulletin TT Louisville, KY 0 USA Revised Jan 0 Phone 0--0 Fax 0--00 Threaded Closures Installation, Operation & Maintenance Caution: Operating a closure can be a hazardous activity and certain
GUMMIKOMPENSATOR GKF8000 / GKF8130
GUMMIKOMPENSATOR GKF8000 / GKF8 Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 Flanges PN10/16-10 C + 100 C for EPDM and + 80 C for NBR Max Pressure : 16 Bars up to DN 300 Specifications
Wheels lie at the heart of nearly every material handling
W HEELS lie at the heart of nearly every material handling system. Improperly specified or poor quality wheels can wreak havoc on the simplest task or a highly complicated system. Fast paced technology
Acid and Chemical Hoses
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Acid and Chemical Hoses gacid and Chemical Hose General Purpose POLIAX
Industrial Rubber Products
Industrial Rubber Products Air & Water HOSE Novaflex 1000* Textile Air Hose Designed for heavy-duty use on industrial pneumatic tools in mines, quarries and construction. Tube: Medium oil resistant Reinforcement:
SUPERSmall O-Rings. The Seal Man s O-Ring Handbook
SUPERSmall O-Rings SUPERSmall O-Rings are available in sizes as small as.002 ID, which is 0.0 mm and with cross sections of.008 or 0.08mm. SUPERSmall O-Rings are manufactured out of various materials including
O-RINGS. ! Description and advantages
O-INGS! Description and advantages The O-ing is the most simple, universal and cost-effective seal of the market. Its simple design (Figure 1) and its widespread use has enabled the development of large-scale
2017 Rubber Sheet Price List. Save 5% on 48 Rolls
Save 5% on 48 Rolls Rubber and Plastic Company 207 Rubber Sheet Price List 800.722.4VIP rubbersheet@viprubber.com www.viprubber.com 540 S Cypress Street La Habra, California 9063 Helpful Information Standard
Inline & 90 Swivels. Hydraulic Live Swivels. Heavy Duty Ball Bearing, Rebuildable Design
Hydraulic Live Swivels Available In BSPP Inline & 90 Swivels Heavy Duty Ball Bearing, Rebuildable Design www.superswivels.com 763-784-5531 Email: sales@superswivels.com Fax: 763-784-7423 M1606.1711 Thousands
Buna-N design resistant to petroleum products. Buna-S design rated for high strength & abrasion resistance.
HOSES Graco offers a wide selection of low and high pressure hoses in every diameter and length to meet your fluid handling needs for chemical compatibility, strength and abrasion resistance. We also provide
shutoff valves 900 Series psig Manual Shutoff Valves
0 6000 psig Manual Shutoff Valves Features Zero leakage Protected o-ring Full flow passages Freedom from wire drawing Panel mount standard Hand wheel or toggle handle How it Works Closed O-ring seal on
PRESSURE REGULATORS GAS PRESSURE REDUCING
GAS PRESSURE REDUCING APPLICATION: Regulation of inlet pressure to gas compressors. Control of supply or distribution system pressure CERTIFICATIONS: Canadian Registration Number (CRN): 0C16234.24567890NTY
EMERGENCY PIPE REPAIR
YOVANN S Co. EMERGENCY PIPE REPAIR Trophées de l Excellence 2012 AWARDED FOR OUR SYSTEM - LEAKS REPAIR ON UTILITY LINES Recognized as the BEST PRACTICE for temporary leaks repair at all facilities WHY
A joint reliance POLIFLEX-T PTFE FLEXIBLE JOINT PFT-0105
A joint reliance POLIFLEX-T PTFE FLEXIBLE JOINT P O L I F L E X - PFT-05 POLIFLEX-T PTFE FLEXIBLE JOINT FEATURES Polytetrafluoroethylene (PTFE) hose has solved the short life problem of metall with most
KEYSTONE. A C E C O E n v i r o n m e n t a l C o m p a n y. Bulletin 10-B
KEYSTONE Filtration Solutions A C E C O E n v i r o n m e n t a l C o m p a n y Bulletin 10-B Standard Housings The 11N, 21N and 23N filter housings are tested and certified by NSF International under
Size : Ends : Min Temperature : Max Temperature : Materials : Galvanized steel flanges
Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 Flanges ISO PN10/16-10 C + 100 C for EPDM and + 80 C for NBR Max Pressure : 16 Bars up to DN 300 Specifications : Absorb vibrations and noises
MV-Series High-Pressure Valves USER GUIDE
MV-Series High-Pressure Valves USER GUIDE 369 Syringa Ridge Sandpoint, ID 83864 281.782.8312 www.vindum.com support@vindum.com V:1.0 (6-27-17) This page is intentionally blank. Copyright 2017 Vindum Engineering,
- CONTENTS. - Pressure Chart. - Rubber Properties. - Custom Built Hose. - Workshop. - Hose Selection Guide. - Hose Usage Guide
Townsville QLD Nth Brisbane QLD Brisbane QLD Adelaide SA Newcastle NSW Auburn NSW h WA Launceston TAS Wodonga VIC Head Office, Melbourne VIC Sunshine VIC - Technical - CONTENTS - Pressure Chart - Rubber
Industrial Rubber Products
Industrial Rubber Products 1 Air & Water Hose Novaflex 1000* Textile Air Hose Designed for heavy-duty use on industrial pneumatic tools in mines, quarries and construction. Tube: Medium oil resistant Reinforcement:
PRESSURE REGULATORS GAS PRESSURE REDUCING
GAS PRESSURE REDUCING APPLICATION: Regulation of inlet pressure to gas compressors. Control of supply or distribution system pressure CERTIFICATIONS: Canadian Registration Number (CRN): 0C16234.24567890NTY
Flange Insulation. Gasket Basics. Why Gaskets Are Used:
Flange Insulation Gasket Basics Why Gaskets Are Used: Gaskets are used to create a static seal between two stationary members of a mechanical assembly and to maintain that seal under operating conditions
Coiling Tube with Twist-Proof Fitting
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Anti-Twisting Coiling Tube for Air Tool Coiling Tube with Twist-Proof Fitting 306 Avoid Twisted Tube Problem
Manguito Antivibration Oria
Manguito Antivibration Oria DIMENSIONS AND CHARACTERISTICS φ Nominal Work pressure DRILL THREAD L mm. d A DN mm. kg/cm2 Nº φ H I 20 70 75 105 10 4 M.12 14 25 70 85 110 10 4 M.12 16 32 70 100 140 10 4 M.16
Materials : Electro galvanized steel flanges
Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 Flanges PN10/16-10 C + 100 C for EPDM and + 80 C for NBR Max Pressure : 16 Bars up to DN 300 Specifications : Absorb vibrations and noises
HYDRALECTRIC LIMITED,
Description:... 2 Applications:... 2 General Performance Data:... 2 Pressure Drop:... 3 General Construction Data:... 4 Dimensioning:... 4 Hose Data:... 5 Insulation:... 5 Ferrule Data:... 5 Installation:...
LifeGuard Petroleum and Chemical Assemblies
LifeGuard Petroleum and Chemical Assemblies Standard Hoses LifeGuard LPG Transfer Hose LifeGuard Safe-Heat Dissipater LifeGuard Hydrogen Hoses LifeGuard Cryogenic Liquid Cylinder Hoses Metal Pigtails LifeGuard
Pilot Assembly Motor Valve Stem Assembly Upstream Pressure Downstream Pressure Motor Valve Diaphragm Pressure. Adjusting Screw.
GAS PRESSURE REDUCING BALANCED APPLICATIONS: Regulation of inlet pressure to gas compressors and control of supply or distribution system pressures where the pressure to the regulator varies significantly
FP McCann Tunnels and Shafts 1
FP M c Cann FP McCann Tunnels and Shafts 1 The McCann range of shaft and tunnel products have been developed to meet the requirements of the latest industry standards which include the British Tunnelling
Introduction to Perfluoroelastomers. White Paper
Introduction to Perfluoroelastomers White Paper Introduction to the World of Perfluoroelastomers The use of elastomers is widespread in our world. Elastomers have many uses including: sealing fluids, for
PRESSURE REGULATORS GAS BACK PRESSURE NON VENTING
GAS BACK PRESSURE NON VENTING APPLICATION: Vent lines or pressure regulation on separators, heater treaters, compressor stations, gas gathering and distribution systems where it is desired that no gas
pvc well casing & drop pipe
C e r t a i nte e d pvc well casing & drop pipe P V C We l l P r o d u c t s Sure Fit PVC well casing and drop pipe have gained broad acceptance since their introduction almost 40 years ago. Today, due
Pressure Sensing Valve - Model 4023
Pressure Sensing Valve - Model 4023 Overview AMOT Model 4023 can be used as a 2 or 3-way capacity, pressure sensing valve. This valve is ideal for applications that require compressor suction and discharge
General Performance Data Hose Ref Minimum Bend. Safety Pressure at 20 C (BAR) Working Pressure at. Flow Rate at 3 bar (lit/min) Working Pressure
The Classic range provides a safe and taint free conveyance of potable water supplies for Domestic and Commercial plumbing applications. The range is designed to achieve robust and flexible solutions with
Industrial Hose Products
Industrial Hose Products PRB 4800-Steam Steam Your Job. Our Hose. QUICK REFERENCE For the name of the Parker distributor nearest you, call 1-800-C-PARKER. Chemical Transfer Description: For suction and
PNEU-THANE K5090, K5094, K5096 Series
REINFORCED AIR & WATER HOSE An extremely lightweight, tough, flexible pneumatic air tool hose that is suitable for a wide range of industrial and construction applications. Tube Clear ether-based polyurethane.
RS Pro 300mm Long EPDM 15bar Braided Stainless Steel Hose RS Stock No
Datasheet RS Pro 300mm Long EPDM 15bar Braided Stainless Steel Hose RS Stock No.711-8476 Description: The Elite range provides robust and flexible solution for the safe conveyance and distribution of water
Materials : Galvanized steel flanges
Size : Ends : Min Temperature : Max Temperature : DN 32 to 200 Flanges PN10/16-10 C + 80 C Max Pressure : 16 Bars Specifications : Absorb vibrations and noises Linear and angular compansion Single NBR
Hydraulic Live Swivels
Switch Your Swivel! Hydraulic Live Swivels Inline & 90 Swivels 304 & 440c Stainless Steel Heavy Duty Ball Bearing, Rebuildable Design Super Swivels was established in 1986. We manufacture heavy-duty, leak
Engineered Valves Group. Revision 2. FABRI-VALVE High Performance Knife Gate Valve.
Engineered Valves Group XS 150 Revision 2 FABRI-VALVE High Performance Knife Gate Valve www.engvalves.com Fabri-Valve XS150 High Performance Knife Gate Valve XS150 High Performance Knife Gate Valve T he
Directional Valves. Hydraulic Operated Directional Valves
Service Data Vickers Directional Valves Hydraulic Operated Directional Valves (F*) DG3V 8 (B) ** (L) (X) (*) (*) 10 (EN**) Released 04/96 5007.03/EN/0496/S DG3V-8-*(C) - (X) - 10 Spring Centered 473726
Flow Sensors & Hydrometers Specification Sheet
Baseline Flow s and Hydrometers Baseline s smart flow sensors and hydrometers are two-wire ready flow measurement and control devices that are pre-programmed with the correct K and Offset values. In addition,
KM/ Stainless steel air bellows Single acting Ø 220 to 400 mm
KM/ Stainless steel air bellows Single acting Ø to mm Stainless steel end plates Frictionless operation No maintenance or lubrication Ideal for short stroke, high-force applications High isolation level
Operations and Instruction Manual Might Swivel Model # Concrete and Steel Anchorage Connector ANSI Z ,000 lbs / 44kn
Operations and Instruction Manual Might Swivel Model # 00238 Concrete and Steel Anchorage Connector ANSI Z359.1 10,000 lbs / 44kn Description: Zinc plated forged heat treated steel, Special design gives
When you buy from us, you get the Green Line advantage
When you buy from us, you get the Green Line advantage Proven product quality and reliability at competitive prices. Large inventories at convenient shipping points across Canada. Many popular hose assemblies
Liquid Ring Compressors Engineered-to-Order Compressor Systems
Liquid Ring Compressors Engineered-to-Order Compressor Systems NASH Liquid Ring Compressor Systems Engineered-to-Order Liquid Ring Compressor Systems Unmatched experience Nash liquid ring compressors are
Team Insert Valve Sample Specification The Insert Valve shall conform to the following:
Team Insert Valve Sample Specification The Insert Valve shall conform to the following: The Ductile Iron 250 p.s.i.g. Insert Valve shall be a Resilient Wedge Gate Valve designed for use in potable water,
SmoothFlex Nominal Bore (SN) Dash Size
SmoothFlex SmoothFlex Hose SmoothFlex is a flexible smoothbore PTFE hose with stainless steel braided reinforcement that is designed for long trouble free service in a wide range of applications that may
Technote. Frese ALPHA cartridges. Application. Features. Benefits.
Page 1 of 7 Application is used in heating and cooling systems for the distribution of flow in various sections of the system. The dynamic balancing valve ensures easy and reliable balancing of the system,
Quality Plastic Pipe Fittings. Technical Data. Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed
Quality Plastic Pipe Fittings Technical Data Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed Effective April 1, 2002 PIPE DIMENSIONS IPS-IRON PIPE SIZE Minimum
Sprocket Selection Guidelines
Sprocket Selection Guidelines Table 1 Information Necessary to Order Sprockets 1. Chain Size Number, type, or drawing number of the chain to be used on the sprocket. (The suitability of a sprocket depends
Switch Your Swivel! Hydraulic Live Swivels. Inline & 90 Swivels. 304 & 440c Stainless Steel Heavy Duty Ball Bearing, Rebuildable Design
Switch Your Swivel! Hydraulic Live Swivels Inline & 90 Swivels 304 & 440c Stainless Steel Heavy Duty Ball Bearing, Rebuildable Design www.superswivels.com 763-784-5531 Email: sales@superswivels.com Fax:
OVERVIEW LOADING & DISCHARGE HOSES FOR OFFSHORE MOORINGS
Hose range in accordance with OCIMF Guide to Purchasing, Manufacturing and Testing of Loading and Discharge Hoses for Offshore Moorings, Fourth Edition 1991 OVERVIEW LOADING & DISCHARGE HOSES FOR OFFSHORE
REACH COMPLIANT 2500 WEIGEL STREET CADILLAC, MI
REACH 2500 WEIGEL STREET CADILLAC, MI 49601 Phone: 800-250-5132 Local: (231) 779-4390 Fax: (231) 779-4399 E-Mail: sales@piranhahose.com Web Site: www.piranhahose.com sales@piranhahose.com www.piranhahose.com
Electro-Magnetic Flowmeters Electromagnetic Sensor
Data Sheet (US) Electro-Magnetic Flowmeters Electromagnetic Sensor MagMaster TM Plus MFF Unrivalled, fully traceable flow performance 0.15% accuracy Operable flow range: 1500:1 ensures more precise revenue
Dean Pump Self-Priming Chemical Process Pumps
Bulletin C 1.2.34.7 Dean Pump Self-Priming Chemical Process Pumps php Series HEAD CAPACITY RANGE CHARTS php Self Primer - 2 Pole 3500 RPM 500 CAPACITY M 3 /HR 2900 RPM 50 HERTZ 25 50 75 125 150 400 TOTAL
Series SFD. Clean Air Filter. Variations. Made to Order. Type. Cartridge (replaceable element) Disposable (non-replaceable element) Up to 100
Clean Air Filter Variations SFD SFD SFD SFD Made to Order Type Disposable (non-replaceable element) Cartridge (replaceable element) Flow rate L/min (ANR) (at inlet pressure.7 MPa) Up to 6 Up to 8 Up to
Directional Controls
Vickers Directional Controls Lever Operator Directional Control Valves DG17S-8-**-10 DG17S4-10 **-50 NF D08/D10, ISO-4401-08/10 Released 5/94 681 able of Contents General Information..................................................................................
Push-In Fitting Type with Stop Valve
http://www.pisco.co.jp Push-In Fitting Type with Stop Valve 278 Push-In Fitting Type with Stop Valve for General Pneumatic Piping. Air Stop by Tube Disconnection. Easy Insertion and Disconnection by Double-passage
AIR AND VACUUM VALVES
MINING DIVISION AIR AND VACUUM VALVES FOR HIGH FLOW K-6NS SERIES DESCRIPTION The K-6NS Series Air and Vacuum Valve discharges air during the filling or charging of the system and admits air into the system
Liquid Ring Compressors Engineered-to-Order Compressor Systems
Liquid Ring Compressors Engineered-to-Order Compressor Systems NASH Liquid Ring Compressors Greatest Performance Range of Liquid Ring Compressors Worldwide The ability to compress wet, saturated or dirty
SEALED CONNECTORS FOR THE LIMIT SWITCHES
SEALED CONNECTORS FOR THE LIMIT SWITCHES LIST OF MODELS / Sealed connectors are used at the cable-connecting section of limit switches. Type and appearance Materials Features Target market Applications
Fabric compensators. 9.0 Elastomer, rubber and metal compensators. Metal compensators
Fabric compensators 9.0 Elastomer, rubber and metal compensators Elastomer compensators for FGD and FGP plants (see also 3.3.6) These compensators are used wherever an increased incidence of chemical attack
GATES ENGINEERING & SERVICES
GATES INDUSTRIAL HOSE PRODUCTS GATES ENGINEERING & SERVICES Gates Rotary Drilling, Vibrator, Cementing, Sour Service, Choke and Kill, Motion Compensator and Decoker oilfield hoses shown in this section
FLOAT OPERATED LEVEL CONTROLLER
PNEUMATIC LEVEL SWITCH APPLICATION: Liquid level controller for oil and gas separators, water knockouts, gas scrubbers and accumulators. FEATURES: Rated for 2000 psi working pressure Push-button dump valve
STAINLESS STEEL TUBE AND PRESS FIT SYSTEM FOR WATER, GAS AND INDUSTRY
STAINLESS STEEL DESIGN & INSTALLATION GUIDE STAINLESS STEEL TUBE AND PRESS FIT SYSTEM FOR WATER, GAS AND INDUSTRY KEMBLA STAINLESS TUBE AND KEMPRESS STAINLESS FITTINGS, OFFERING ALL OF THE BENEFITS OF
WEEKLY SAFETY MEETING All Euramax Subsidiaries HAND SAFETY. Safety Meeting Contents. Meeting Notice. Leaders Guide. Employee Handout.
Safety Meeting Contents Meeting Notice Leaders Guide Employee Handout Employee Quiz Meeting Sign-In Sheet Employee Puzzle PRIOR TO THE WEEKLY MEETING: - Post the meeting notice by the timeclock - Read
Oxygen Measurement Systems High Reliability and Wide Application Coverage
Introduction High Process Efficiency Under Any Condition Oxygen Measurement Systems High Reliability and Wide Application Coverage METTLER TOLEDO provides sensors to measure dissolved oxygen (DO) in demanding
Flange Bolt Torquing. for Resistoflex Plastic-Lined Piping Products. Torquing. Retorquing. Hydrotesting. Annual retorquing
Flange Bolt Torquing for Resistoflex Plastic-Lined Piping Products Torquing When assembling flange connections, always use a full complement of clean, new high strength A193-B7 bolting. If using stainless
Roller Chain and Sprocket Troubleshooting Guide
Roller Chain and Sprocket Troubleshooting Guide Drive System (Roller Chain and Sprockets) Troubleshooting Guide 1. General Chain is riding up on the sprocket. The roller chain and sprocket do not match.
"ENGINEERED SOLUTIONS THROUGH QUALITY PRODUCTS" H. A. KING MEETING YOUR VIBRATION CONTROL NEEDS
"ENGINEERED SOLUTIONS THROUGH QUALITY PRODUCTS" H. A. KING MEETING YOUR VIBRATION CONTROL NEEDS HISTORY The H.A. King Company has provided design, consulting and manufacturing services for rubber bonded
CAST IRON VALVES FLOAT VALVE
CAST IRON VALVES FLOAT VALVE NETAFIM CAST IRON VALVES FLOAT VALVE INLINE 25-400MM ANGLE 50-100MM SPECIFICATIONS Manufactured to ISO 9001 Available Valve sizes INLINE Flanged 50mm to 600mm & Threaded 19mm