ACCESSORY KIT INSTALLATION INSTRUCTIONS

Size: px
Start display at page:

Download "ACCESSORY KIT INSTALLATION INSTRUCTIONS"

Transcription

1 ACCESSORY KIT INSTALLATION INSTRUCTIONS HIGH ALTITUDE APPLICATION CONVERSION INSTRUCTION HIGH EFFICIENCY GAS FURNACES 1PS0306 / 1PS0307 / 1PS0308 / 1PS0309 / 1PS0901 / 1PS0902 / 1PS0903 FOR USE WITH MODELS: P*UR / G9T-UP / P*DH / G9T-DH / GF9 / GM9 / GY9 / XYF90 This conversion kit is to be installed by a qualified service agency in accordance with the manufacturer s instructions and all applicable codes and requirements of the authority having jurisdiction. If the information in these instructions is not followed exactly, a fire, an explosion or production of carbon monoxide may result causing property damage, personal injury or loss of life. The qualified service agency is responsible for the proper installation of this kit. The installation is not proper and complete until the operation of the converted appliance is checked as specified in the manufacturer s instructions supplied with the kit. The conversion of new certified central heating gas appliances must conform to directions outlined in this instruction. Installation must be made in accordance with American National Standard National Fuel Gas Code, ANSI Z223.1, NFPA- 54 latest edition, unless superseded by local codes. For Canadian installations, the conversion shall be carried out in accordance with the requirements of the Provincial authorities having jurisdiction and in accordance with the CAN/CGA B149.1 National Gas and Propane Installation Code. The manufacturer accepts no responsibility for malfunctions due to improper conversions. PROPANE AND HIGH ALTITUDE CONVERSION KITS It is very important to choose the correct kit and/or gas orifices for the altitude and the type of gas for which the furnace is being installed. Only use natural gas in furnaces designed for natural gas. Only use propane (LP) gas for furnaces that have been properly converted to use propane (LP) gas. Do not use this furnace with butane gas. Incorrect gas orifices or a furnace that has been improperly converted will create an extremely dangerous condition resulting in premature heat exchanger failure, excessive sooting, high levels of carbon monoxide, personal injury, property damage, a fire hazard and/or death. High altitude and propane (LP) conversions are required in order for the appliance to satisfactory meet the application. An authorized distributor or dealer must make all gas conversions. In Canada, a certified conversion station or other qualified agency, using factory specified and/or approved parts, must perform the conversion. The installer must take every precaution to insure that the furnace has been converted to the proper gas orifice size when the furnace is installed. Do not attempt to drill out any orifices to obtain the proper orifice size. Drilling out a gas orifice will cause misalignment of the burner flames, causing premature heat exchanger burnout, high levels of carbon monoxide, excessive sooting, a fire hazard, personal injury, property damage and/or death. GENERAL This instruction is intended for the conversion of new equipment only, for operation at altitudes greater than 4,500 ft. above sea level. Follow the basic unit installation instruction for all other aspects of the installation. All units are equipped to operate up to 4,500 ft. above sea level without a high altitude kit. Installations above 2,000 ft. must be field derated as required by the National Fuel Gas Code, ANSI Z223.1 (latest edition), or in Canada, CAN/CGA B149.1 National Gas and Propane Installation Code and all other applicable local codes and utility requirements. This instruction provides the necessary information to select and install both the proper pressure switch and orifice for your specific application. Data is provided for both natural and propane (LP) gases. This high altitude pressure switch and accessory includes a special switch and other items as detailed below. TABLE 1: Common Parts Description Part Number Quantity Conversion Label Install. Instruction Unitary Products Group

2 TABLE 2: Pressure Switch Accessory Kit Switch Part Number Pressure Setting 1PS * 0.55 IWC 1PS * 0.75 IWC 1PS * 0.85 IWC 1PS * 0.90 IWC 1PS * 0.95/0.40 IWC 1PS * 0.80/0.40 IWC 1PS * 0.65/0.40 IWC * May be any numeral 0-9. PRESSURE SWITCH For installations below 4500 ft., refer to furnace installation instructions for applications which do not require a pressure switch change. For all other high altitude applications, a pressure switch change is required to provide safe and reliable operation. Table 3 indicates the correct pressure switch accessory for each unit model applied at two different altitude groupings. Do not adjust the original pressure switch to allow operation at high altitude. Unsafe operation will result. TABLE 3: High Altitude Pressure Switch Usage Input (MBH) ACCESSORY PART NUMBER P*UR / G9T-UP (Upflow) 40 1PS PS /1200 1PS /1600 1PS PS PS PS0307 P*DH / G9T-DH (Downflow/Horizontal) 40 1PS PS /1200 1PS /1600 1PS PS PS0307 GF9 / GM9 / GY9 / XYF90-U (Upflow) 60/80/120 1PS PS0307 GF9 / GM9 / GY9 / XYF90-N (Downflow/Horizontal) 60/100/120 1PS /1200 1PS /1600 1PS0903 The high altitude pressure switch should be changed by following this procedure. 1. Remove the burner access door. The gas supply shall be shut off prior to disconnecting the electrical power, before proceeding with the conversion. 2. Note the location of the wires on the pressure control and then disconnect them. Remove the hose from the pressure control. 3. Remove the screws securing the pressure control and remove it from the unit. Check that the new pressure control part number is correct for your application (Refer to Table 1). Install the new pressure control. 4. Replace the hose and wiring as originally connected. ORIFICE SIZE SELECTION A number of factors determine the correct orifice usage for your application. These factors include the original orifice sizing, BTU content of the gas and the altitude. The standard orifice used in the furnace is shown in Table 4 or 5. Find your unit and determine the standard orifice provided. For natural gas applications, contact your gas supplier for the actual BTU content (heating value) of the fuel provided at your altitude. Table 6 indicates various BTU content fuels. Use the BTU heating value that is nearest to your value. Read across the selected table from the standard orifice to the altitude for your application and then note the new orifice number. If your unit has a #45 orifice as standard and a heating gas value of 900 BTU/CU.FT., at an altitude of 7,000 feet a #47 orifice will provide the correct firing rate. For propane (LP) gas applications, Use Table 7 to select the proper high altitude orifice size. The furnace must first be converted to use propane (LP) through the use of the standard propane conversion kit accessory. After selecting the proper orifice size for your application, see Table 8 that indicates the part number for your required orifice number. The orifices may be obtained through your local Source 1 Parts Distribution Center. 2 Unitary Products Group

3 The high altitude orifices should be changed by the following procedure: 1. Carefully remove the wires from the gas valve and note their location so they may be properly replaced. Remove the burner box door. Remove the two screws that hold the manifold to the burner box and slide the manifold and orifices back out of the burners. 2. Remove the main burner orifices from the manifold and discard them. 3. Install the new main burner orifices in the manifold and tighten them. After installing a new orifice in each location, any leftover orifices may be discarded. 4. Reinstall the main burners in the assembly by reversing the removal process. TABLE 4: Standard Orifice Usage Input (MBH) Natural Orifice Propane Orifice Size Size Upflow Models TABLE 5: Standard Orifice Usage Input (MBH) Natural Orifice Propane Orifice Size Size Downflow/Horizontal Models TABLE 6: Altitude/ Heating Value Orifice Selection Heating Value (ManifolD Pressure 3.5" W.C.) 1200 BTU/CU Ft BTU/CU.FT BTU/CU.FT. 900 BTU/CU.FT. 800 BTU/CU.FT. Orifice Shipped With Unit TABLE 7: Altitude/Propane (LP) Gas Heating Value Orifice Selection Propane Gas Heating Value (Manifold Pressure 10.0 W.C.) 2516 BTU/CU FT. Recommended Orifice Altitude (Ft. Above Sea Level) 0 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10, Propane Sea Level Recommended Orifice Altitude (Ft. Above Sea Level) 0 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10, Unitary Products Group 3

4 TABLE 8: Orifice Part Numbers Burner Orifices Size # Source 1 Part Number Install the high altitude conversion labels as described in the LABELS sections of this instruction. 6. Refer to the unit installation instructions to complete the installation before continuing with these procedures. TESTS AND ADJUSTMENTS The following tests must be performed at the time of conversion following completion of the installation. 4. Make sure unit electrical disconnect switch is in the OFF position. TABLE 9: Inlet Gas Pressure Range INLET GAS PRESSURE RANGE Propane (LP) Minimum 4.5 W.C. (1.12 kpa) 8.0 W.C. (1.99 kpa) Maximum 10.5 W.C. (2.61 kpa) 13.0 (3.24 kpa) W.C. IMPORTANT - The inlet gas pressure operating range table specifies what the minimum and maximum gas line presures must be for the furnace to operate safely. The gas line pressure MUST BE 7 W.C. (1.74 kpa) for 11 W.C. (2.74 kpa) for Propane (LP) Gas in order to obtain the BTU input specified on the rating plate and/or the nominal manifold pressure specified in these instructions and on the rating plate. 5. Set the room thermostat to call for heat. 6. Turn unit electrical disconnect switch to ON. The combustion blower should start and the hot surface igniter should start glowing. 7. After air has been purged from the gas supply line, ignition should occur. Shortly after ignition, the manifold and gas inlet pressures can be checked on the manometers. Main burner ignition may be delayed on the first ignition cycle due to air in the gas manifold. 8. Adjust manifold pressure to specifications shown above. This setting will result in an input which is properly derated for your altitude. Supply gas must be within the range shown above. If required, adjust the incoming regulator spring so that the pressure falls within the range. Make sure both gas and power supplies are shut off before proceeding. 1. Connect a manometer to the pressure tap on both the inlet and outlet side of the gas valve. Connect a power supply and a gas supply to the unit, if not already connected. Refer to unit installation instructions for proper procedure for connecting manometer to furnace. 2. Turn on the gas supply and bleed air from the gas supply lines at a point as close to the inlet or the gas valve as is practical. Make sure the space is free of gas before proceeding. 3. Turn the gas valve control switch to the ON position. The gas valve regulator cap must be in place to determine final gas pressure setting. 9. Observe several ignition cycles. All main burners must ignite without delayed ignition or burning at the orifices. If delayed ignition is observed, verify that the igniter is properly mounted (not loose or crooked on bracket, and that bracket screws are not loose). 10. If excessive yellow tipping, or excessive noise is observed during any phase of main burner operation, correct unit operation. 11. If burning at the orifices is observed during any phase of main burner operation change the orifice size to the next larger size and recheck the furnace input [BTU/H (kw)] using the input calculations in these instructions if you have a gas meter, and/or check the furnace operation making sure the unit is still operating with in the range specified on the rating plate. DO NOT ALLOW THE FURNACE TO CONTINUE OPERATAING WITH BURNING AT THE ORI- FICES. This is very dangerous condition that MUST BE RESOLVED. 4 Unitary Products Group

5 12. With the main burners ignited, check for gas leaks, especially in the following locations: gas valve inlet and outlet connections, manifold union in the burner compartment, and main burner orifices where they thread into the manifold. Repair any leaks found and recheck. Do not use an open flame or any source of ignition to check for leaks. 13. Operate the furnace for 15 minutes and measure the supply and return air temperatures. Verify that the temperature rise (supply air - return air rise) is within the allowable range. See the unit data plate for the minimum/maximum allowable temperature rise. If the measured rise is in excess of the maximum shown on the data plate, a higher blower speed must be selected. See the unit wiring diagram to make this change. 14. If a gas meter is available check the unit input using the calculations in this instruction. 15. During unit operation, the main burner appearance and igniter location should be as shown in Figure 1. BLUE CONE PORTION OF FLAME SHOULD ENTER HEAT EXCHANGER TUBE CALCULATING THE FURNACE INPUT (NATURAL GAS) NOTE: Front door of burner box must be secured when checking gas input. Burner orifices are sized to provide proper input rate using natural gas with a heating value of 1050 BTU/Ft 3. If the heating value of your gas is significantly different, it may be necessary to replace the orifices. For propane applications that do not have a gas meter you will have to replace the natural gas orifices and adjust the manifold pressure. The input rate can not be calculated without a gas meter. 1. Turn off all other gas appliances connected to the gas meter. 2. At the gas meter, measure the time (with a stop watch) it takes to use 2 cubic ft. ( m 3.) of gas. 3. Calculate the furnace input by using one of the following equations. LABELS 1. Remove label from the shipping box. Check the natural gas to Propane box. If in Canada, check the appropriate box for respective conversion station. NOTE: If the unit has been converted from natural gas to propane (LP), place the new label over the existing label and fill in the appropriate information. 2. Under "Rating After Conversion", write in the following: a. Orifice size, as stamped on the orifice b. Maximum inlet pressure c. Minimum inlet pressure d. Manifold pressure for both low and high inputs e. Input ratings, same as on the Rating Plate f. Outlet ratings, same as on the Rating Plate 3. Under "Changes After Conversion", write in the following: a. Kit number, located on the outside of the box FIGURE 1: Proper Burner Flame Appearance 16. With the main burners off, disconnect the manometers and replace the plugs. Check for gas leakage at the plugs. 17. Replace all access panels. b. Unit model number c. Stamp or write in the name of the organization making conversion, address, city, state, month and year. 4. Remove label backing and affix label adjacent to the Rating Plate. 5. On propane (LP) conversions, affix the corresponding gas valve label (provided in the conversion kit) to the valve. Unitary Products Group 5

6 In the USA use the following formula to calculate the furnace input. For natural gas multiply the heat content of the gas BTU/SCF (or Default 1030 BTU/SCF, times 2 cubic ft. of gas measured at the gas meter, times a barometric pressure and temperature correction factor of 0.960; times 3600, then divided by the time (In seconds) it took to measure 2 cubic ft. of gas from the gas meter. The formula for US input calculation using a cubic foot gas meter: In Canada you will use the following formula to calculate the furnace input if you are using a cubic foot gas meter. For multiply the Heat content of the gas MJ/m 3 (or Default 39.2), times 2 cu. ft. of gas x to convert from cubic feet to cubic meters measured at the gas meter, times a barometric pressure and temperature correction factor of 0.960; times 3600, then divided by the time it took to measure 2 cu.ft. of gas from the gas meter. The formula for metric input calculation using a cubic foot gas meter: For propane (LP) gas multiply the heat content of the gas BTU/ SCF (or Default 2500 BTU/SCF, times 1 cubic ft. of gas measured at the gas meter, times a barometric pressure and temperature correction factor of 0.960; times 3600, then divided by the time (In seconds) it took to measure 1 cubic ft. of gas from the gas meter. BTU/f 3 x 2 cu.ft. x x 3600 = BTUH/H BTU/f 3 x 2 cu.ft. x x 3600 Seconds it took to measure the 2 cu.ft. of gas Seconds it took to measure the 2 cu.ft. of gas = BTUH/H NATURAL GAS INPUT CALCULATION PROPANE (LP) GAS INPUT CALCULATION 1030 x 2 x x x 1 x x 3600 = 79, = 80, Propane Gas BTU/SCF 1030 BTU/SCF 2500 For Propane (LP) Gas multiply the Heat content of the gas MJ/ m 3 (or Default 93.14), times 1 cu. ft. of gas x to convert from cubic feet to cubic meters measured at the gas meter, times a barometric pressure and temperature correction factor of 0.960; times 3600, then divided by the time it took to measure 1 cu.ft. of gas from the gas meter. MJ/m 3 x (2 cu.ft. x Conv) x x 3600 = MJ/H x = kw x = BTUH/H Seconds it took to measure the 2 cu.ft. of gas NATURAL GAS INPUT CALCULATION 39.2 x 2 x x 3600 = x = x = 80, BTU/SCF 1030 = 39.2 MJ/m 3 PROPANE (LP) GAS INPUT CALCULATION x 1 x x 3600 = x = x = 80, Propane Gas BTU/SCF MJ/m 3 In Canada use the following formula to calculate the furnace factor of 0.960; times 3600, then divided by the time it took to input if you are using a gas meter that measures cubic meters. measure m 3 of gas from the gas meter. For multiply the Heat content of the gas MJ/m 3 (or For Propane (LP) Gas multiply the Heat content of the gas MJ/ Default 39.2), times m 3 of gas measured at the gas m 3 (or Default 93.14), times m 3 of gas measured at the meter, times a barometric pressure and temperature correction gas meter, times a barometric pressure and temperature correction factor of 0.960; times 3600, then divided by the time it took to measure cm of gas from the gas meter. The formula for metric input calculation using a cubic foot gas meter: MJ/m 3 x (2 cu.ft. x Conv) x x 3600 = MJ/H x = kw x = BTUH/H Seconds it took to measure the 2 cu.ft. of gas NATURAL GAS INPUT CALCULATION 39.2 x 2 x x 3600 = x = x = 80, BTU/SCF 1030 = 39.2 MJ/m 3 PROPANE (LP) GAS INPUT CALCULATION x 1 x x 3600 = x = x = 80, Propane Gas BTU/SCF MJ/m 3 6 Unitary Products Group

7 NOTES Unitary Products Group 7

8 Subject to change without notice. Printed in U.S.A Rev. B (0404) Copyright by York International Corp All rights reserved. Supersedes: Rev. A (0204) Unitary 5005 Norman Product York OK Group Drive 73069

The conversion of new certified central heating gas appliances must conform to directions outlined in this instruction.

The conversion of new certified central heating gas appliances must conform to directions outlined in this instruction. ACCESSORY KIT INSTALLATION INSTRUCTIONS HIGH ALTITUDE APPLICATION CONVERSION MID-EFFICIENCY SINGLE-STAGE INDUCED COMBUSTION FURNACES MODELS: P*HU/G8T-UH/L8T-UH/FL8 UPFLOW / HORIZONTAL P*DN/G8T-DN/L8T-DN

More information

ACCESSORY KIT INSTALLATION INSTRUCTIONS

ACCESSORY KIT INSTALLATION INSTRUCTIONS ACCESSORY KIT INSTALLATION INSTRUCTIONS PROPANE CONVERSION - INDUCED COMBUSTION FURNACES 1NP0501 FOR USE WITH 95% MODELS: TG9S, GG9S (130,000 BTU ONLY) FOR USE WITH 80% MODELS: TG(8,L)S, GG(8,L)S (130,000

More information

ACCESSORY KIT INSTALLATION MANUAL

ACCESSORY KIT INSTALLATION MANUAL ACCESSORY KIT INSTALLATION MANUAL LP (PROPANE) CONVERSION KIT 1NP0366 FOR USE WITH MODELS: G8C & GF8 This conversion kit shall be installed by a qualified service agency in accordance with these instructions

More information

ACCESSORY KIT INSTALLATION INSTRUCTIONS

ACCESSORY KIT INSTALLATION INSTRUCTIONS ACCESSORY KIT INSTALLATION INSTRUCTIONS 1NP0680 - PROPANE CONVERSION FOR USE WITH MODELS: PM8, PC8, PM9, PC9, FL9M, FL9C, FC9M, FC9C This conversion kit is to be installed by a qualified service agency

More information

ACCESSORY KIT INSTALLATION INSTRUCTIONS

ACCESSORY KIT INSTALLATION INSTRUCTIONS ACCESSORY KIT INSTALLATION INSTRUCTIONS PROPANE CONVERSION - INDUCED COMBUSTION FURNACES 1NP0347 FOR USE WITH 90% MODELS: GF9S, GY9S, GM9S, PS9, FL9S, FC9S, PT9, FL9T, FC9T, GM9T, PV9, FL9V, FC9V, GM9V,

More information

ACCESSORY KIT INSTALLATION INSTRUCTIONS PROPANE CONVERSION - INDUCED COMBUSTION FURNACES 1NP0347

ACCESSORY KIT INSTALLATION INSTRUCTIONS PROPANE CONVERSION - INDUCED COMBUSTION FURNACES 1NP0347 ACCESSORY KIT INSTALLATION INSTRUCTIONS PROPANE CONVERSION - INDUCED COMBUSTION FURNACES 1NP0347 FOR USE WITH 90% MODELS: GF9S, GY9S, GM9S, PS9, FL9S, FC9S, PT9, FL9T, FC9T, GM9T, PV9, FL9V, FC9V, GM9V,

More information

ACCESSORY KIT INSTALLATION INSTRUCTIONS PROPANE CONVERSION - INDUCED COMBUSTION FURNACES 1NP0347

ACCESSORY KIT INSTALLATION INSTRUCTIONS PROPANE CONVERSION - INDUCED COMBUSTION FURNACES 1NP0347 ACCESSORY KIT INSTALLATION INSTRUCTIONS PROPANE CONVERSION - INDUCED COMBUSTION FURNACES 1NP0347 FOR USE WITH 90% + MODELS: GF9S, GY9S, GM9S, PS9, FL9S, FC9S, PT9, FL9T, FC9T, GM9T, PV9, FL9V, FC9V, GM9V,

More information

installation instructions

installation instructions installation instructions GAS CONVERSION KIT PROPANE-TO-NATURAL P/N 315572-71201 4GAD 6GAD Cancels: IIK 4G-50-4 IIK 4G-50-5 7/15/91 NOTE: Read the entire instructions before starting the installation.

More information

Installation Instructions

Installation Instructions 48011HW NATURAL GAS TO PROPANE CONVERSION KIT 58HDX, 359AAV, PG9YAB, PG9YAA Installation Instructions SAFETY REQUIREMENTS Installing and servicing heating equipment can be hazardous due to gas and electrical

More information

Installation Instructions For Natural Gas Conversion

Installation Instructions For Natural Gas Conversion Installation Instructions For Natural Gas Conversion (Kit Part No. 1175405) This kit is designed to convert PGX4 and PX4 Two -Stage Gas units for use with Natural Gas. Table 1 Heating Value at Altitude

More information

Your safety and the safety of others are very important.

Your safety and the safety of others are very important. NATURAL GAS TO PROPANE CONVERSION KIT ALPKT57- INSTALLATION INSTRUCTIONS PROPANE CONVERSION KIT SAFETY... INSTALLATION REQUIREMENTS... Tools and Parts... LP Gas Requirements... Table of Contents INSTALLATION

More information

Natural Gas High-Altitude Conversion Kit For Installations in the United States (2,001 10,000 Feet)

Natural Gas High-Altitude Conversion Kit For Installations in the United States (2,001 10,000 Feet) Natural Gas High-Altitude Conversion Kit For Installations in the United States (2,001 10,000 Feet) INSTALLATION INSTRUCTIONS For R7 Series Light Commercial Packaged Gas Electric Units IIMPORTANT: Please

More information

INSTRUCTIONS FOR CONVERTING CONDENSING GAS MOBILE HOME FURNACES MODEL SERIES: CMA3*, CMC1*, VMA3*, VMC1*

INSTRUCTIONS FOR CONVERTING CONDENSING GAS MOBILE HOME FURNACES MODEL SERIES: CMA3*, CMC1*, VMA3*, VMC1* INSTRUCTIONS FOR CONVERTING CONDENSING GAS MOBILE HOME FURNACES MODEL SERIES: CMA3*, CMC1*, VMA3*, VMC1* THIS KIT CONTAINS: AOPS7741 (NATURAL TO PROPANE CONVERSION PARTS FOR MODEL SIZE, 50) AOPS7742(NATURAL

More information

WARNING: Installation Instructions. Natural Gas High Altitude Conversion Kit United States Installations Only

WARNING: Installation Instructions. Natural Gas High Altitude Conversion Kit United States Installations Only Natural Gas High Altitude Conversion Kit United States Installations Only Installation Instructions Light Commercial Packaged Gas Electric Units R7TQ Series 6, - 7 1/2, & 10 Ton (2,001 FT - 10,000 FT)

More information

Natural Gas to L.P. Gas Conversion Kit

Natural Gas to L.P. Gas Conversion Kit Natural Gas to L.P. Gas Conversion Kit For Bosch 80% AFUE Gas Furnace, BGS80 Model Installation Instructions 3124627 2 Natural Gas to L.P. Gas Conversion Kit Installation Instructions Data subject to change

More information

INSTALLATION INSTRUCTIONS FOR HIGH ALTITUDE KITS: RXGY-F29, F30, F31, F32 & F33

INSTALLATION INSTRUCTIONS FOR HIGH ALTITUDE KITS: RXGY-F29, F30, F31, F32 & F33 INSTALLATION INSTRUCTIONS FOR HIGH ALTITUDE KITS: RXGY-F29, F30, F31, F32 & F33 FOR TWO-STAGE 90 PLUS DOWNFLOW/HORIZONTAL (-GTK) MODELS Recognize this symbol as an indication of Important Safety Information

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Propane Gas Conversion Kit WGCK-1 Instructions for 0-6,000 Feet Elevation Installations This propane gas conversion kit is to be used only when converting the following furnace

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS For Burner Kit replacement of 553010021 Burners in GUI, GDI & GNI Gas Furnaces Using Natural Gas Please read these instructions completely before attempting installation. SAFETY

More information

Natural Gas to L.P. Gas Conversion Kit

Natural Gas to L.P. Gas Conversion Kit Natural Gas to L.P. Gas Conversion Kit For Bosch 96% AFUE Gas Furnace, BGH96 Model Installation Instructions 3124627 2 Natural Gas to L.P. Gas Conversion Kit Installation Instructions Data subject to change

More information

INSTALLATION INSTRUCTIONS FOR HIGH ALTITUDE KITS: RXGY-F13, RXGY-F27 AND RXGY-F28

INSTALLATION INSTRUCTIONS FOR HIGH ALTITUDE KITS: RXGY-F13, RXGY-F27 AND RXGY-F28 INSTALLATION INSTRUCTIONS FOR HIGH ALTITUDE KITS: RXGY-F13, RXGY-F27 AND RXGY-F28 FOR TWO-STAGE (GPL/GPR/GPE/GLL/GLR/GLE) MODELS Recognize this symbol as an indication of Important Safety Information THESE

More information

INSTALLATION INSTRUCTIONS FOR HIGH ALTITUDE KITS: RXGY-F23, F24, F25, F26, F38, F39, F40 & F41

INSTALLATION INSTRUCTIONS FOR HIGH ALTITUDE KITS: RXGY-F23, F24, F25, F26, F38, F39, F40 & F41 INSTALLATION INSTRUCTIONS FOR HIGH ALTITUDE KITS: RXGY-F23, F24, F25, F26, F38, F39, F40 & F41 FOR MODULATING DOWNFLOW/HORIZONTAL AND DEDICATED HORIZONTAL MODELS (-GGD, -GGE, -GGF)! Recognize this symbol

More information

Installation Instructions For Propane Gas Conversion (Kit Part No ) This kit is designed for conversion to Propane Gas

Installation Instructions For Propane Gas Conversion (Kit Part No ) This kit is designed for conversion to Propane Gas Installation Instructions For Propane Gas Conversion (Kit Part No. 1173859) This kit is designed for conversion to Propane Gas Table 1 LP Gas Orifice Kits and Sizes Elevation Above Sea Level 0 to 2000

More information

Installation Instructions WARNING: WARNING: WARNING: LP AND HIGH ALTITUDE LP GAS CONVERSION KIT FOR UNITED STATES INSTALLATIONS

Installation Instructions WARNING: WARNING: WARNING: LP AND HIGH ALTITUDE LP GAS CONVERSION KIT FOR UNITED STATES INSTALLATIONS LP AND HIGH ALTITUDE LP GAS CONVERSION KIT FOR UNITED STATES INSTALLATIONS Installation Instructions For Model Series *G7/*GC2 Furnaces and Appliances Using Honeywell Gas Valves. BEFORE THE CONVERSION

More information

Installation Instructions

Installation Instructions LP and High Altitude LP Gas Conversion Kit For United States Installations Installation Instructions For Model Series *G6/PGF1 Furnaces, *L1/PGC1 Furnaces, and *R4/PPG1 Gas/Electric Appliances using Honeywell

More information

WARNING: Gas Conversion Kit Instructions Applies to: Model UDAP, UDAS, UDBP, and UDBS Unit Heaters. General and Warnings FOR YOUR SAFETY

WARNING: Gas Conversion Kit Instructions Applies to: Model UDAP, UDAS, UDBP, and UDBS Unit Heaters. General and Warnings FOR YOUR SAFETY Form CP-UD-GC Obsoletes I-UD-GC (Version E) Gas Conversion Kit Instructions Applies to: Model UDAP, UDAS, UDBP, and UDBS Unit Heaters General and Warnings All gas conversion must be done by a qualified

More information

GAS KITS & ACCESSORIES 504,986M 11/2004 HIGH ALTITUDE KIT

GAS KITS & ACCESSORIES 504,986M 11/2004 HIGH ALTITUDE KIT LENND 2004 Lennox Industries Inc. DaItas, Texas, USA GAS KITS & ACCESSORIES Litho U.S.A. 504,986M 11/2004 HIGH ALTITUDE KIT INSTALLATION INSTRUCTIONS FOR HIGH ALTITUDE KIT (83M75) USED WITH G43UF & G51MP

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS For Propane to Natural Gas Conversion Kit Model No: NAHA001NG or Part (1172960) CONVERT Series N8MPN/L B 50, 75, 100, 125 *8MPN/L B 50, 75, 100, 125 *8MPN B 150 *8DNL B 50, 75,

More information

SL G3. Warning

SL G3. Warning Important: If converting from Propane to Natural Gas - order the Natural Gas Conversion Parts Kit (IBC Part # P-307) from your authorized IBC Distributor. Use the Propane Gas conversion parts kit if the

More information

Gas Conversion Kits CERAMIC HEATER SERIES (1, 2, 3, 4 Burner Units)

Gas Conversion Kits CERAMIC HEATER SERIES (1, 2, 3, 4 Burner Units) DESCRIPTION These kits are designed to convert from one gas type to another (eg. from NATURAL to PROPANE or from PROPANE to NATURAL) only for new heaters (5 years or newer) by replacing the gas valve spring

More information

SL G3 - Fuel Conversion to Propane (NG to LP) P-Kit 302

SL G3 - Fuel Conversion to Propane (NG to LP) P-Kit 302 SL 40-399 G3 - Fuel Conversion to Propane (NG to LP) P-Kit 302 If converting from Propane to Natural Gas, order the Natural Gas Conversion Parts Kit (IBC Part # P-303) from your authorized IBC Distributor.

More information

/2004 US/CA

/2004 US/CA 630 9765 0/004 US/CA For the contractor Propane Conversion Kit Instructions Sealed Combustion Gas Boiler Logano GA44 This kit and instructions are for converting the GA44 model boilers from Natural Gas

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS PROPANE TO NATURAL GAS CONVERSION KIT NAHA00801NG or PART NO. 1183389 TABLE OF CONTENTS Safety Considerations... 1 Introduction... 1 Description and Usage... 2 Induced Combustion,

More information

WARNING: AVERTISSEMENT. LP & HIGH ALTITUDE LP CONVERSION KIT FOR INSTALLATIONS IN the United STATES (0-10,000 Ft)

WARNING: AVERTISSEMENT. LP & HIGH ALTITUDE LP CONVERSION KIT FOR INSTALLATIONS IN the United STATES (0-10,000 Ft) LP & HIGH ALTITUDE LP CONVERSION KIT FOR INSTALLATIONS IN the United STATES (0-10,000 Ft) INSTALLATION Instructions For R6GP Light Commercial Package Gas / Electric Units IMPORTANT: Please read all instructions

More information

Propane Conversion Kit Instructions

Propane Conversion Kit Instructions 604 8 0/ US/CA For heating engineers Propane Conversion Kit Instructions Logano G4 X gas-fired boiler This conversion kit and the accompanying instructions are for conversion of G4 X gas-fired boilers

More information

GAS VALVE RETROFIT KIT Pull Through Tube Heater Models

GAS VALVE RETROFIT KIT Pull Through Tube Heater Models GAS VALVE RETROFIT KIT Pull Through Tube Heater Models DESCRIPTION: This kit is designed to replace existing Honeywell gas valves #VR8205P and #VR8205Q with White-Rodgers gas valves #36J23 and #36J58 respectively

More information

INSTALLATION GUIDE Gas Rangetops

INSTALLATION GUIDE Gas Rangetops INSTALLATION GUIDE Gas Rangetops Contents Wolf Gas Rangetops........................... 3 Safety Instructions............................ 4 Gas Rangetop Specifications.................... 5 Gas Rangetop

More information

Installation Instructions

Installation Instructions Installation Instructions Gas Conversion Kit Natural-to- Propane for Standing Pilot and HSI Fixed-Speed Non-Condensing Furnaces KGANP2801F80 CERTIFIED NOTE: Read the entire instruction manual before starting

More information

SL G3 - Fuel Conversion to Natural Gas (LP to NG) P-Kit 301

SL G3 - Fuel Conversion to Natural Gas (LP to NG) P-Kit 301 SL 26-260 G3 - Fuel Conversion to Natural Gas (LP to NG) P-Kit 301 Note If converting from Natural Gas to Propane, order the Natural Gas Conversion Parts Kit (IBC Part # P-300) from your authorized IBC

More information

Gas Conversion Kits Push Through (Positive Pressure) Tube Heater Models

Gas Conversion Kits Push Through (Positive Pressure) Tube Heater Models DESCRIPTION These kits are designed to convert from one gas type to another (eg. from NATURAL to PROPANE or from PROPANE to NATURAL) when equipped with White-Rodgers DSI gas valves number 36J23 or 36J58.

More information

Parts List. Qty. Qty.

Parts List. Qty. Qty. Installation Instructions SAFETY REQUIREMENTS Parts List Installing and servicing heating equipment can be hazardous due to gas and electrical components. Only trained and qualified personnel should install,

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATI INSTRUCTIS For Natural Gas to Propane Conversion Kit Model No: NAHA001LP or Part No. (1172958) CVERT Series BTUH N8MPN/L B 50, 75, 100, 125 *8MPN/L B 50, 75, 100, 125 *8MPN B 150 *8DNL B 50,

More information

36E DSI and HSI Two-Stage Combination Gas Valve INSTALLATION INSTRUCTIONS

36E DSI and HSI Two-Stage Combination Gas Valve INSTALLATION INSTRUCTIONS INLET PRESS TAP WTE-RODGERS 36E54-214 DSI and HSI Two-Stage Combination Gas Valve INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS

More information

Instructions for High Altitude Conversion

Instructions for High Altitude Conversion 6304 38 0/ US/CA For heating engineers Instructions for High Altitude Conversion Logano G334 X gas-fired boiler This conversion kit and the accompanying instructions are for conversion of G334 X gas-fired

More information

G196 Series BASOTROL Redundant Combination Gas Valve with Manual Shutoff Valve

G196 Series BASOTROL Redundant Combination Gas Valve with Manual Shutoff Valve Installation Instructions Issue Date March 13, 2013 G196 Series BASOTROL Redundant Combination Gas Valve with Manual Shutoff Valve Application The G196 valves are suitable for use with natural gas, Liquefied

More information

USER S INFORMATION MANUAL

USER S INFORMATION MANUAL USER S INFORMATION MANUAL UPFLOW, DOWNFLOW, UPFLOW/HORIZONTAL & HORIZONTAL ONLY INDUCED DRAFT GAS FURNACES Recognize this symbol as an indication of Important Safety Information If the information in this

More information

G196 Series BASOTROL Redundant Combination Gas Valve with Manual Shutoff Valve

G196 Series BASOTROL Redundant Combination Gas Valve with Manual Shutoff Valve Installation Instructions Issue Date August 19, 2008 G196 Series BASOTROL Redundant Combination Gas Valve with Manual Shutoff Valve Application The G196 valves are suitable for use with natural gas, Liquefied

More information

36E DSI, HSI & Proven Pilot Two-Stage Combination Gas Valve INSTALLATION INSTRUCTIONS

36E DSI, HSI & Proven Pilot Two-Stage Combination Gas Valve INSTALLATION INSTRUCTIONS INLET PRESS TAP WTE-RODGERS 36E96-314 DSI, HSI & Proven Pilot Two-Stage Combination Gas Valve INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL

More information

Operator: Save these instructions for future use!

Operator: Save these instructions for future use! INLET PRESS TAP WHITE-RODGERS 36E93-304 Delay-Opening Combination Gas Valve INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY

More information

Natural Gas Conversion Kit

Natural Gas Conversion Kit PART # 781 NGCK-M (Manual Ignition) Natural Gas Conversion Kit WARNING: This conversion kit shall be installed by a qualified service agency in accordance with the manufacturer s Instructions and all applicable

More information

36G22, 36G23, 36G24 & 36G52 36J22, 36J23, 36J24 & 36J52 DSI and HSI Single Stage Combination Gas Valve

36G22, 36G23, 36G24 & 36G52 36J22, 36J23, 36J24 & 36J52 DSI and HSI Single Stage Combination Gas Valve Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE. DESCRIPTION

More information

DANGER WARNING IMPORTANT

DANGER WARNING IMPORTANT BWC Series Instructions for Field Conversion From: Natural Gas to LP LP to Natural Gas D E S I G N E D T O L E A D DANGER These instructions include a procedure for adjusting the air-fuel mixture on this

More information

G96 Series BASOTROL Dual Operator Valve

G96 Series BASOTROL Dual Operator Valve Installation Instructions 9. Issue Date February 22, 2013 G96 Series BASOTROL Dual Operator Valve Applications The G96 valves are combination, dual operator, automatic valves available with or without

More information

36H SERIES Combination Gas Valve

36H SERIES Combination Gas Valve FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE. DESCRIPTION The 36H series combination gas valve is

More information

VR8205S,T Direct Ignition Combination Gas Controls

VR8205S,T Direct Ignition Combination Gas Controls VR805S,T Direct Ignition Combination Gas Controls INSTALLATION INSTRUCTIONS APPLICATION TheVR805S,T Direct Ignition Combination Gas Controls are used in gas-fired appliances with up to 70 ft 3 /hr capacity

More information

Propane Conversion Kit Instruction

Propane Conversion Kit Instruction Propane Conversion Kit Instruction Condensing gas boiler Required Input Rates Logamax plus GB62-80 kw 270,000 btu/hr Logamax plus GB62-00 kw 35,000 btu/hr This kit and instructions are for converting the

More information

Propane Conversion Kit Instruction

Propane Conversion Kit Instruction Propane Conversion Kit Instruction Condensing gas boiler Required Input Rates GB142-24 84,800 btu/hr GB142-30 106,000 btu/hr GB142-45 160,900 btu/hr GB142-60 214,800 btu/hr This kit and instructions are

More information

Installation Instructions

Installation Instructions KGAPN40012HW Gas Conversion Kit Propane to Natural for 58HDV, 359BAV and PG9MTAV Furnaces Installation Instructions NOTE: Read the entire instruction manual before starting the installation. AFETY CONIDERATION

More information

36E03 and 36E38 DSI and HSI Step Opening Combination Gas Valve INSTALLATION INSTRUCTIONS

36E03 and 36E38 DSI and HSI Step Opening Combination Gas Valve INSTALLATION INSTRUCTIONS INLET PRESS TAP WHITE-RODGERS 36E03 and 36E38 DSI and HSI Step Opening Combination Gas Valve INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS

More information

Propane Conversion Kit Instruction

Propane Conversion Kit Instruction Propane Conversion Kit Instruction Condensing gas boiler Required Input Rates GB42-24 84,800 btu/hr Tab. GB42-30 06,000 btu/hr GB42-45 49,000 btu/hr GB42-60 24,800 btu/hr This kit and instructions are

More information

Installation Instructions

Installation Instructions CRNGELEV001A00 CRNGELEV002A00 CRLPELEV005A00 CRLPELEV006A00 CRLPKIT9001A00 LARGE ROOFTOP UNITS with R---410A ACCESSORY PROPANE and HIGH ALTITUDE GAS CONVERSION KIT GAS HEATING/ELECTRIC COOLING 15 to 25

More information

Installation Instructions

Installation Instructions Installation Instructions Gas Conversion Kit Natural-to-Propane for Standing Pilot and HSI Fixed-Speed Furnaces KGANP2001ALL CANADIAN GAS ASSOCIATION APPROVED R NOTE: Read the entire instruction manual

More information

Installation Instructions

Installation Instructions Installation Instructions Gas Conversion Kit Propane-to-Natural for Standing Pilot, HSI Fixed-Speed, HSI Two-Speed, and Variable Speed Furnaces KGAPN2301ALL NOTE: Read the entire instruction manual before

More information

INSTALLATION INSTRUCTIONS MANUAL ON/OFF SAFETY VALVE/PILOT KIT MODEL GA9050A-1 (F0235)

INSTALLATION INSTRUCTIONS MANUAL ON/OFF SAFETY VALVE/PILOT KIT MODEL GA9050A-1 (F0235) P/N 126905-01 Rev. B 11/2016 INSTALLATION INSTRUCTIONS MANUAL ON/OFF SAFETY VALVE/PILOT KIT MODEL GA9050A-1 (F0235) For All Single, Dual and Triple Burner Natural and Propane/LP Gas Logs P126905-01 For

More information

Natural Gas Conversion Kit

Natural Gas Conversion Kit SERIAL #: Attention: Centro recommends that a qualified gas technician perform the gas supply conversion and orifice replacement for this BBQ model. Natural Gas Conversion Kit F O R U S E W I T H M O D

More information

Installation Instructions

Installation Instructions CRNGELEV001A00 CRNGELEV002A00 CRLPELEV005A00 CRLPELEV006A00 CRLPKIT9001A00 PACKAGED ROOFTOP UNITS with R---410A ACCESSORY PROPANE and HIGH ALTITUDE GAS CONVERSION KIT GAS HEATING/ELECTRIC COOLING 176,000---400,000

More information

36C/36D HSI, DSI Proven Pilot Gas Valves INSTALLATION INSTRUCTIONS

36C/36D HSI, DSI Proven Pilot Gas Valves INSTALLATION INSTRUCTIONS 36C/36D HSI, DSI Proven Pilot Gas Valves INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING

More information

Conversion instructions from natural gas to propane

Conversion instructions from natural gas to propane 6 720 804 895 202/0 EN-US For heating engineers Conversion instructions from natural gas to propane Room air-independent special gas-fired boiler Logano GA24 This conversion kit and the instructions are

More information

WARNING: FOR OUTDOOR USE ONLY

WARNING: FOR OUTDOOR USE ONLY Certified to CSA International 4.96 US For Outdoor Gas Fireplaces A HIGHER STANDARD IN QUALITY AND APPEARANCE SAFE AND BEAUTIFUL OUTDOOR LARGO FIRE PIT FOR PROPANE AND *NATURAL GAS OWNER S MANUAL WARNING:

More information

Gas Conversion Kit Pilot Ignition Heaters

Gas Conversion Kit Pilot Ignition Heaters INSTALLATION INSTRUCTIONS Gas Conversion Kit Pilot Ignition Heaters View these instructions online at www.lbwhite.com Kit Contents: DESCRIPTION QTY. Instructions 1 Burner Orifi ce 1 Pilot Orifi ce 1 Variable

More information

GM-7000 Series CE Approved Gas Control Valve

GM-7000 Series CE Approved Gas Control Valve Installation Instructions GM-7000 Issue Date November 9, 2012 GM-7000 Series CE Approved Gas Control Valve Installation IMPORTANT: These instructions are intended as a guide for qualified personnel installing

More information

GAS CONVERSION KIT Installation Instructions Range/Rangetop

GAS CONVERSION KIT Installation Instructions Range/Rangetop GAS CONVERSION KIT Installation Instructions Range/Rangetop FOR SERVICE PERSONNEL ONLY IMPORTANT - READ ALL INSTRUCTIONS BEFORE YOU BEGIN THE INSTRUCTIONS HEREIN MUST ONLY BE PERFORMED BY A QUALIFIED SERVICE

More information

BGA158 Series CE Approved Class A Shutoff Gas Valve

BGA158 Series CE Approved Class A Shutoff Gas Valve Installation Instructions BGA158 Issue Date August 24, 2011 BGA158 Series CE Approved Class A Shutoff Gas Valve Applications The BGA158 Series shutoff gas valve is an electrically operated gas valve that

More information

Operator: Save these instructions for future use!

Operator: Save these instructions for future use! WHITE-RODGERS 6C8-5 Combination Gas Control INSTALLATI INSTRUCTIS Operator: Save these instructions for future use FAILURE TO READ AND FOLLOW ALL INSTRUCTIS CAREFULLY BEFORE INSTALLING OR OPERATING THIS

More information

SERVICE MANUAL SALAMANDER BROILERS RADIANT AND INFRARED 36RB 36IRB VULCAN C36RB C36IRB WOLF

SERVICE MANUAL SALAMANDER BROILERS RADIANT AND INFRARED 36RB 36IRB VULCAN C36RB C36IRB WOLF SERVICE MANUAL SALAMANDER BROILERS RADIANT AND INFRARED VULCAN 36RB 36IRB WOLF C36RB C36IRB This Manual is prepared for the use of trained Vulcan Service Technicians and should not be used by those not

More information

BGA158 Series CE Approved Class B Shutoff Gas Valve

BGA158 Series CE Approved Class B Shutoff Gas Valve Installation Instructions BGA158 Issue Date March 22, 2016 BGA158 Series CE Approved Class B Shutoff Gas Valve Applications The BGA158 Series shutoff gas valve is an electrically operated shutoff valve

More information

Dual Solenoid Gas Valve Installation

Dual Solenoid Gas Valve Installation Installation IMPORTANT: These instructions are intended as a guide for qualified personnel installing or servicing FLYNN Gas Products. Carefully follow all instructions in this bulletin and all instructions

More information

JACKSON GRILLS PATIO FIRE

JACKSON GRILLS PATIO FIRE PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE JACKSON GRILLS PATIO FIRE Tested by: Tested to: ANSI Z21.97-2010 & CSA CAN 1-2.21-M85 WARNING: For Outdoor Use Only. WARNING: If the information in this

More information

Gas Countertop Griddle

Gas Countertop Griddle Gas Countertop Griddle This manual contains important information regarding your purchased equipment. Please read the manual thoroughly prior to equipment set-up, operation and maintenance. Failure to

More information

Operator: Save these instructions for future use!

Operator: Save these instructions for future use! WHITE-RODGERS Type 36C04, 36C14 Step-Opening Combination Gas Control (24 Volt, 120 Volt & 750 mv Models) INSTALLATI INSTRUCTIS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW

More information

INSTALLATION AND OPERATING INSTRUCTIONS BIG TEX VENTED GAS LOGS

INSTALLATION AND OPERATING INSTRUCTIONS BIG TEX VENTED GAS LOGS INSTALLER! PLEASE LEAVE WITH HOMEOWNER INSTALLATION AND OPERATING INSTRUCTIONS BIG TEX VENTED GAS LOGS by Please Note: It is important that you read instructions before installing or operating gas logs

More information

For *G7 / *GC2 & GUH* / GDD* Series Furnaces & Appliances Using Honeywell Gas Valves

For *G7 / *GC2 & GUH* / GDD* Series Furnaces & Appliances Using Honeywell Gas Valves LP & HIGH ALTITUDE LP GAS CONVERSION KIT FOR INSTALLATIONS IN CANADA INSTALLATION INSTRUCTIONS For *G7 / *GC2 & GUH* / GDD* Series Furnaces & Appliances Using Honeywell Gas Valves BEFORE THE CONVERSION

More information

Installation and Operation Instructions

Installation and Operation Instructions Bentintoshape llc Installation and Operation Instructions Fire Pit - Hidden Tank Models www.bentintoshape.net INTRODUCTION Your bentintoshape Cor-Ten Steel Gas Fire Pit is designed for installation in

More information

GEN-1e CO2 Generator OVERVIEW INSTALLATION PROPANE GENERATORS ONLY NATURAL GAS GENERATORS ONLY

GEN-1e CO2 Generator OVERVIEW INSTALLATION PROPANE GENERATORS ONLY NATURAL GAS GENERATORS ONLY GEN-1e CO2 Generator Custom Automated Products offers economical and safe carbon dioxide generators. They produce CO2 by burning either propane or natural gas. We have designed our CO2 generator to allow

More information

VR8305 Direct Ignition Combination Gas Control

VR8305 Direct Ignition Combination Gas Control Honeywell VR8305 Direct Ignition Combination Gas Control Application These direct ignition combination gas controls are used in gas-fired appliances with capacities up to 300 feet 3 /hour at inch wc pressure

More information

Gas Furnaces 95AF2V. Warranty Heat Exchanger - 20 Year Limited Parts - 5 Year Limited

Gas Furnaces 95AF2V. Warranty Heat Exchanger - 20 Year Limited Parts - 5 Year Limited PRODUCT SPECIFICATIONS INSTALLATION OPTIONS Available in Upflow/Horizontal and Counterflow models HEAT EXCHANGER Aluminized steel primary heat exchanger with crimped non-welded construction Stainless steel

More information

UNIVERSAL GAS FRYER Instruction Manual Model #8065NS

UNIVERSAL GAS FRYER Instruction Manual Model #8065NS Part No. 88847 Revised: August 2004 UNIVERSAL GAS FRYER Instruction Manual Model #8065NS Cincinnati, OH 45241-4807 USA GAS SAFETY PRECAUTIONS OPERATING INSTRUCTIONS UNPACKING AND ASSEMBLY After unpacking

More information

North American Orifice Metering System

North American Orifice Metering System Combustion North American Orifice Metering System 8697 and M8697 Metering Orifices accurately measure gas flows to industrial burners. They are compact, inexpensive, and can be installed in individual

More information

CASUAL FIRESIDE A HIGHER STANDARD IN QUALITY AND APPEARANCE - SAFE AND BEAUTIFUL OUTDOOR FIRE PIT FOR PROPANE AND *NATURAL GAS

CASUAL FIRESIDE A HIGHER STANDARD IN QUALITY AND APPEARANCE - SAFE AND BEAUTIFUL OUTDOOR FIRE PIT FOR PROPANE AND *NATURAL GAS OWNER S MANUAL Report #280-G-04b-5 51-01F Cypress 51-03F Vesuvius 51-04F Contessa 51-06F Avila 51-07 F Ziggurat 51-08F Santorini CASUAL FIRESIDE Tested & Certified to ANSI Z21.97-2010 CGA 2.17-M91 (R2009)

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS PROPANE GAS to NATURAL GAS CONVERSION KIT Condensing Gas Furnaces F9MES 220 V 50Hz NAHA01101NG CERTIFIED NOTE: Read the entire instruction manual before starting the installation.

More information

Installation Instructions

Installation Instructions KGAPN4701AAA Gas Conversion Kit Propane --- to --- Natural ECM X 2 --- Stage and Single --- Stage 90% Condensing Gas Furnaces Installation Instructions CERTIFIED C E D E S R T I G N TABLE OF CONTENTS PAGE

More information

IPG IGNITION GAS PILOTS BACK-LOADED GAS

IPG IGNITION GAS PILOTS BACK-LOADED GAS INSTRUCTIONS IPG IGNITION GAS PILOTS BACK-LOADED GAS WARNING These instructions are intended for use only by experienced, qualified combustion start-up personnel. Adjustment of this equipment and its components

More information

RE: PROPANE SYSTEM & REGULATOR TESTING/INSPECTION PROCEDURE

RE: PROPANE SYSTEM & REGULATOR TESTING/INSPECTION PROCEDURE March 22, 2013 RE: PROPANE SYSTEM & REGULATOR TESTING/INSPECTION PROCEDURE Regulators: Symptom: Pressure Drop Cause: External leaks detected at pigtail hose MPT fitting connection(s) to regulator body

More information

G92 Series BASOTROL Automatic Pilot Gas Valve

G92 Series BASOTROL Automatic Pilot Gas Valve Installation Instructions Issue Date September 17, 2008 G92 Series BASOTROL Automatic Pilot Gas Valve Installation IMPORTANT: Only qualified personnel should install or service BASO Gas Products. These

More information

INSTRUCTION MANUAL. Gas Salamander

INSTRUCTION MANUAL. Gas Salamander INSTRUCTION MANUAL Gas Salamander This manual contains important information regarding your unit. Please read this manual thoroughly prior to equipment set-up, operation and maintenance. Failure to comply

More information

GAS SUPPLY DESIGN GUIDE

GAS SUPPLY DESIGN GUIDE GAS SUPPLY DESIGN GUIDE Natural Gas, Propane Gas, or Dual Fuel Fired Modulating, Condensing Boilers BENCHMARK Series Gas-Fired Boilers For models: BMK750 to BMK6000 Last Update: 06/20/2014 PR1 06/20/14

More information

BGA158, BGA171 and BGA110 Series Shutoff Gas Valve

BGA158, BGA171 and BGA110 Series Shutoff Gas Valve Installation Instructions BGA Series Issue Date October 3, 2017 BGA158, BGA171 and BGA110 Series Shutoff Gas Valve Applications The BGA Series shutoff gas valve is an electrically operated gas valve that

More information

Gas Countertop Hot Plates

Gas Countertop Hot Plates Gas Countertop Hot Plates This manual contains important information regarding your Patriot unit. Please read the manual thoroughly prior to equipment set-up, operation and maintenance. Failure to comply

More information

GAS SUPPLY APPLICATION GUIDE

GAS SUPPLY APPLICATION GUIDE GAS SUPPLY APPLICATION GUIDE Natural Gas or Propane Modulating & Condensing Boilers and Water Heaters This document applies to the following models: Boilers AM 399B AM 500B AM 750B AM 1000B Gas-Fired Boilers

More information

Operator: Save these instructions for future use!

Operator: Save these instructions for future use! WHITE-RODGERS Type 36C67 Combination (24 Volt Models) INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING

More information

INSTALLATION AND OPERATION INSTRUCTIONS

INSTALLATION AND OPERATION INSTRUCTIONS INSTALLATION AND OPERATION INSTRUCTIONS Liquid propane units are designed and certified for use, only with household liquid propane supply. Do not use " portable " propane tanks of less than 20-lbs. capacity.

More information