RISK ASSESSMENT MACHINE: FFC BASE MACHINE P/N: ENGLISH TRANSLATION RISK ASSESSMENT (RISK ESTIMATION AND RISK EVALUATION) AND RISK REDUCTION

Size: px
Start display at page:

Download "RISK ASSESSMENT MACHINE: FFC BASE MACHINE P/N: ENGLISH TRANSLATION RISK ASSESSMENT (RISK ESTIMATION AND RISK EVALUATION) AND RISK REDUCTION"

Transcription

1 RIK AEMENT ENGLIH TRANLATION age 1 of 18 RIK AEMENT (RIK ETIMATION AND RIK EVALUATION) AND RIK REDUCTION MACHINE: FFC BAE MACHINE /N:

2 RIK AEMENT age 2 of 18 TABLE OF CONTENT INTRODUCTION A - GENERAL INFORMATION B TOXICOLOGICAL HAZARD C - IDENTIFICATION OF OIBLE HAZARD D - RIK REDUCTION E - NEWLY ADDED HAZARD F - AEMENT OF ALL IDENTIFIED HAZARD G - CONCLUION H RIK WEIGHT INTRODUCTION MANAGEMENT REONIBILITIE: The Management has specified as follows: the responsibility for carrying out the risk analysis is assigned to the technical office, which may seek advice from competent, independent companies/personnel. The responsibility for issuing the Risk Analysis document is assigned to the Technical Management. The risk analysis must be reviewed every time changes are made to the machine or new legislation, technical standards which could affect the safety of the product are issued, as well as in the event of an accident. eriodically review the feedback given by people who work on the field to ensure on-going suitability and effectiveness of risk management.

3 RIK AEMENT age 3 of 18 A 1.0 GENERAL INFORMATION A FULL DECRITION AND IDENTIFICATION OF THE MACHINE. CRIMING MACHINE FOR INTERCHANGEABLE MINI-ALICATOR TO CRIM IERCING CONTACT ON FLEXIBLE FLAT CABLE (FFC CABLE) FOR ELECTRONIC AND AUTOMOTIVE ALICATION. Machine Classification rotection from electrical hazards, direct and indirect contacts Class I Class II Internal electrical power supply Type B Type BF Type CF rotection from penetration I 20 afety in potentially explosive environments Unsuitable A IDENTIFICATION OF THE ERON/DEARTMENT REONIBLE FOR RIK ANALYI. TECHNICAL DEARTMENT MANAGER A 1.3 AUDIT INTERVAL: YEARLY A 2.0- IDENTIFICATION OF QUALITY AND QUANTITY FEATURE A UE OF THE MACHINE A Intended machine user: Unskilled labourer - First level operator A Qualification required for the user: The user must be trained on how to correctly use the machine and on the hazards caused by damages to and removal of safety devices. General Information Name Intended use Intended operating environment FFC BAE MACHINE CRIMING MACHINE FOR FFC CABLE CONTACT LABORATORY

4 RIK AEMENT age 4 of 18 A Ambient conditions: - relative humidity: 30 75% - temperature: C - atmospheric pressure: ha A MATERIAL AND/OR COMONENT BUILT IN OR UED IN THE MACHINE A List of critical materials/components (the following materials/components must be approved): AFETY DEVICE AND ELECTRICAL AND ELECTRONIC COMONENT (EE TECHNICAL FILE). A ENVIRONMENTAL IMACT ON THE MACHINE A ossible environmental impact which may affect safety. ta ( C) RH% (ha) Operating environment % Transport environment % torage environment % ower supply ELECTRICAL 230 VAC 10% 50/60 HZ 2.5 A 600 VA NEUMATIC 6 BAR 5 L/MIN NONE Types of substances discharged

5 RIK AEMENT age 5 of 18 A 2.5 MACHINE IMACT ON THE ENVIRONMENT INTERFERENCE TO THE OWER MAIN DICARGE OF TOXIC UBTANCE HEATING EMC INTERFERENCE GENERATOR A 2.6 CONUMABLE AND/OR EENTIAL ACCEORIE Not applicable A 2.7 MAINTENANCE AND/OR CALIBRATION A arts subject to maintenance: As shown in the user manual. A Maintenance interval and person in charge: MAINTENANCE TO BE CARRIED OUT: ee manual, by: UER/OERATOR MAINTENANCE ENGINEER A How to monitor accuracy and precision. ERIODIC CALIBRATION to be carried out by: OERATOR KILLED ENGINEER ELF-CHECK MECHANICAL MAINTENANCE ENGINEER A OFTWARE A oftware installation, change or replacement UER/OERATOR KILLED ENGINEER A oftware interaction with equipment safety HIGH AVERAGE LOW NONE A LIMITED LIFE: N.A A torage time reduction: N.A A DELAYED EFFECT AND/OR DUE TO LONG ERIOD OF UE A Ergonomic effects: N.A A Cumulative effects: N.A A MECHANICAL FORCE ALIED TO THE MACHINE: N.A A Details of parts and associated mechanical forces A Monitoring mechanical forces: N.A

6 RIK AEMENT age 6 of 18 A MACHINE LIFE A Factors affecting machine life AGEING ENVIRONMENT... A Maximum life and settings to be monitored: N.A A AFE DIACTIVATION AND DIOAL A crappage DIOAL OF CRAAGE DIOAL OF TOXIC MATERIAL DIOAL OF HAZARDOU MATERIAL ANY RECYCLABLE MATERIAL DIOAL OF LIQUID A Instructions for scrapping the machine. The user must comply with current local legislation. Our machine does not generate hazardous waste or waste requiring special treatment. A TRAINING AND INTALLATION: A Training required for the user: Having carefully read the User Manual taff involved: Operator Mechanical maintenance engineer - Electrical maintenance engineer - afety officer A Installation A Qualification required for machine installer: Mechanical-electrical maintenance engineer A Training required for machine installer: Reading and understanding the instructions provided in the User Manual A Installation supervised by the manufacturer: If required A Final testing/start-up (list of tests to be carried out): Not required A UER INTERFACE A Critical human intervention ACCE TO MACHINE I REERVED TO AUTHORIED EOLE BY MEAN OF: KEY-OERATED WITCH AWORD (only for machine settings) BIOMETRIC RECOGNITION AVAILABILITY OF IGNAGE ALARM NOIE LEVEL NORMALIED COLOUR CODING EXTERNAL DEVICE CONTROLLED FROM THE MAIN MENU: A CONNECTION AND ACCEORIE OLARIED CONNECTION LOCKED CONNECTION FORCED CONNECTION INERTION DIFFERENT CONNECTOR FOR TYE OF CONNECTION A CONTROL INTERFACE: N.A

7 RIK AEMENT age 7 of 18 A DATA DILAY IN THE UER LANGUAGE TILTABLE DILAY ILLUMINATED DILAY CLARITY OF INFORMATION A MENU IN THE UER LANGUAGE ELECTION CONTROL TYE OF NAVIGATION: EQUENTIAL A MACHINE TRANORT FEATURE FIXED MOVING ORTABLE: WITH HANDLE ERGONOMICAL FEATURE FOR TRANORT WITH WHEEL WHEEL WITH BRAKE

8 RIK AEMENT age 8 of 18 ANTI-ROLLOVER CARRIAG B TOXICOLOGICAL HAZARD : N.A C - IDENTIFICATION OF OIBLE HAZARD Key: NA = Not Applicable U.M. = User Manual REF. NO. HAZARD NORMAL CONDITION INGLE FAULT CONDITION NOTE C1 ENERGY C1.1 Electricity YE YE C1.2 Heat NO YE FAULTY MOTOR C1.3 Ionising radiations N.A C1.4 Non-ionising radiations N.A C1.5 Visible radiations N.A C1.6 Electromagnetic fields YE YE C1.7 Moving parts N.A C1.8 uspended weights N.A C1.9 atient's support machine fault N.A C1.10 ressure (container breakage) N.A C1.11 ound pressure NO NO C1.12 Vibration NO NO C1.13 Magnetic field (such as MRI) NO NO C2 BIOLOGICAL C2.1 Biological charge N.A C2.2 Biological contamination N.A C2.3 Biological incompatibility N.A C2.4 Improper emission N.A (substance/energy) C2.5 Toxicity N.A C2.6 Infection (indirect) N.A C2.7 irogenicity N.A C2.8 Incapability to maintain safe N.A hygiene levels C2.9 Degradation N.A C3 ENVIRONMENTAL HAZARD AND CONTRIBUTING FACTOR C3.1 Electromagnetic fields YE YE C3.2 redisposition to YE YE electromagnetic interference C3.3 Emissions of electromagnetic YE YE interference C3.4 Unsuitable power supply YE YE C3.5 Unsuitable coolant source NA C3.6 torage or operation outside YE

9 RIK AEMENT age 9 of 18 REF. NO. HAZARD NORMAL CONDITION INGLE FAULT CONDITION required ambient conditions C3.7 Incompatibility with other NA equipment to be used C3.8 Accidental mechanical damage NO NO C3.9 Contamination caused by NA scrappage and/or machine disposal C4 HAZARD CONNECTED WITH MACHINE UE C4.1 Unsuitable labelling NO C4.2 Inadequate user instructions NO C4.3 Inadequate accessory NA specifications C4.4 Inadequate specifications for preliminary checks NO C4.5 Operating instructions NO excessively complex C4.6 Unavailable or separate NO operating instructions C4.7 Use by unskilled or untrained staff YE C4.8 Reasonably predictable YE incorrect use C4.9 Exposed sharp tips or corners etc. YE YE NOTE C5 HAZARD CAUED BY FAILURE TO OERATE, MIED MAINTENANCE AND OBOLECENCE C5.1 Unsuitable or missing NO NO maintenance specifications, including inadequate specifications for operating checks after a repair operation. C5.2 Lack of adequate estimate of NO NO machine life. C5.3 Loss of mechanical integrity NO NO C5.4 Unsuitable packaging (machine NO NO deterioration) C5.5 Improper reuse YE D - RIK REDUCTION

10 RIK AEMENT age 10 of 18 Describe the means used to reduce any risk regarded as unacceptable to a minimum level in all stages of the process: D1 - Direct safety devices (design) D2 - Indirect safety devices (protection). Examples of protection are: REDUCED ACCE (such as due to radiation hazard) - ROTECTION FROM HAZARD (such as by means of a protective cover) D3 - Redefinition of intended use E - NEWLY ADDED HAZARD Establish and, if required, describe if the risk reduction procedure has introduced new hazards. N.A. F - AEMENT OF ALL IDENTIFIED HAZARD F1 - Risk assessment Risks for all identified hazards ETIMATED NOT ETIMATED G - CONCLUION ALL OTENTIAL RIK RELATED TO THE RECRIBED UE OF THE MACHINE HAVE BEEN ETIMATED OR REMOVED. ALL OTENTIAL RIK RELATED TO THE RECRIBED UE OF THE MACHINE HAVE BEEN ETIMATED AND THE REIDUAL RIK, LITED BELOW, AOCIATED TO IDENTIFIED HAZARD, ARE ACCETABLE.

11 RIK AEMENT age 11 of 18 REF.2 REF.5 REF.3 REF.1 REF.4 REF.6 REF.7 REF.8 Doc.nr: 01 : 30/12/2009 Issued:

12 RIK AEMENT age 12 of 18 H These are associated with a severity rate and a probability rate, as shown in the following table: robability everity 1 (rare) 2 (infrequent) 3 (frequent) 4 (unavoidable) G1 (irrelevant) A A A ALAR 2 (slight) A A ALAR ALAR 3 (slight) A ALAR I I 4 (fatal) ALAR ALAR I I the combination of both lead to the acceptability level, more specifically: A = acceptable risk ALAR = as low as reasonably practicable risk reduction U = unacceptable risk Irrelevant = Harm to people, things and animals which does not lead to injuries or damages light= Harm to people, things or animals which has caused injuries/bruising likely to heal in a short period of time or slight damage erious= Harm to people, things or animals which caused injuries and serious permanent harm or damage Fatal= Death of a person or an animal or irreparable/catastrophic damage to things Doc.nr: 01 : 30/12/2009 Issued:

13 RIK AEMENT age 13 of 18 The technical solutions selected to reduce the risk must then be assessed, by making sure this operation has not introduced new hazards. The investigation, i.e. continuing the risk assessment procedure, is carried out in compliance with applicable standards. This leads to the following table: Nature or risk Risk details (robabi (Acceptability (everity) lity) ) olution Risk reduction robability everity (Acceptabil ity) Residual risk ENERGY RELATED HAZARD Electricity (Ref.1 2) COMLIANCE WITH TANDARD Electrocution by direct 2 4 ALAR CEI EN604-1 and indirect contact FIXED GUARD- LABEL 1 1 A A Heat Not applicable Ionising radiations Not applicable Non-ionising radiations (visible) Electromagnetic fields Not applicable Emissions radiated by the machine 3 1 A COMLIANCE WITH TANDARD EN EN A A Moving parts Not applicable uspended weights Not applicable prings Not applicable Doc.nr: 01 : 30/12/2009 Issued:

14 RIK AEMENT age 14 of 18 Nature or risk Risk details (robab (everity) ility) (Acceptability ) Failure of a safety device Injury to people 2 3 ALAR Removal of a safety device Injury to people 2 3 ALAR Removal of a safety switch Injury to people 2 3 ALAR olution eriodic inspections, staff training, notes in the U.M. eriodic checks, staff training, notes in the U.M. eriodic inspections, staff training, notes in the U.M. Risk reduction robability everity (Acceptabil ity) Residual risk 1 3 A A A - ressure Not applicable ound pressure Not applicable Vibrations Not applicable Magnetic fields COMLIANCE Electromagnetic fields 2 1 A WITH TANDARD generated by the machine EN EN A - MECHANICAL HAZARD Rotating parts (Ref.3) Injury to people 3 2 ALAR Moving guard 1 1 A - Moving parts (Ref.4) Injury to people 3 2 ALAR Moving guard 1 1 A - Cable blocking pneumatic clamp (Ref.5) light bruising to fingers 3 1 A Fixed guard 1 1 A - Electrical slide (Ref.6) light bruising to fingers 1 2 A Fixed guard 1 1 A - Crimping blades (Ref.7) Bruising and wounding of tips of fingers. 2 2 ALAR Moving guard 1 1 A - Doc.nr: 01 : 30/12/2009 Issued:

15 RIK AEMENT age 15 of 18 Nature or risk Carrier cutting unit (Ref.8) Risk details Bruising and wounding of tips of fingers. (robab (everity) ility) (Acceptability ) olution Risk reduction robability everity (Acceptabil ity) Residual risk 2 2 ALAR Fixed guard 1 1 A - Nature or risk Risk details (robabi (everity) lity) (Acceptability ) olution Risk reduction robability everity (Acceptabil ity) Residual risk Electromagnetic interferences Likelihood of emissions produced by other equipment ENVIRONMENTAL AND BIOLOGICAL HAZARD 2 1 A COMLIANCE WITH TANDARD EN EN A A Unsuitable power supply Not applicable robability of operation outside intended ambient Not applicable conditions Incompatibility with other machines/equipment Not applicable Biological hazards Not applicable Doc.nr: 01 : 30/12/2009 Issued:

16 RIK AEMENT age 16 of 18 Nature or risk Risk details (robabi (Acceptability olution (everity) lity) ) ERGONOMIC HAZARD Exposed sharp corners Injury to staff 3 2 ALAR Notes on drawings and care of parts notes in the U.M. - Instability of machine Rollover of machine 2 3 ALAR install the machine on a stable bench Doc.nr: 01 : 30/12/2009 Issued: Risk reduction robability everity (Acceptabil ity) Residual risk 1 1 A A 1 3 A A Abrasive surfaces Not applicable Hot areas of the machine Not applicable Rotation of parts Not applicable Ejected parts Not applicable Risk reduction Nature or risk Risk details Residual (robabi (Acceptability olution (Acceptabil (everity) robability everity risk lity) ) ity) HAZARD CONNECTED WITH MACHINE UE Unsuitable labelling All required information Inspection during the 1 1 A is missing final testing stage 1 1 A A Unsuitable operating All required information instructions is missing 1 1 A Check the U.M. 1 1 A A Inadequate accessory specifications Not applicable Operating instructions Wrong installation and excessively complex maintenance, not 1 1 A Check the U.M. 1 1 A A Use by Incorrect use of the 1 1 A Cautions on U.M. 1 1 A A

17 RIK AEMENT age 17 of 18 Nature or risk unsuitable/inexperienced staff Reasonable predictable incorrect use Risk details machine and its accessories (robabi (everity) lity) (Acceptability ) olution Risk reduction robability everity (Acceptabil ity) Not applicable A Residual risk Incorrect measurement and other metrology issues Not applicable Incorrect transfer of data Not applicable Incorrectly presented data Not applicable Details of inadequate performance for intended use Missing / unsuitable maintenance specifications, including inadequate specifications on functional inspections after maintenance operations HAZARD CAUED BY FUNCTIONAL FAULT, MAINTENANCE AND AGEING Not applicable All required information is missing 1 1 A Inadequate maintenance Inefficient safety devices 1 3 A Notes on the U.M. Cautions on U.M. 1 1 A A 1 1 A - 6. ANY REIDUAL RIK Doc.nr: 01 : 30/12/2009 Issued:

18 RIK AEMENT age 18 of 18 By issuing this document, the Management of COMTEC.R.L declares to have taken into account and identified all hazards which could reasonably occur and associated risks have been assessed and reduced to an acceptable level. The overall residual risk must be regarded as totally acceptable. 7. I A NEW RIK AEMENT REQUIRED? No, unless new machine designs or applications are introduced. Doc.nr: 01 : 30/12/2009 Issued:

USER MANUAL. MACMAG magnetic separator MHK MHF

USER MANUAL. MACMAG magnetic separator MHK MHF USER MANUAL MACMAG magnetic separator MHK MHF Important Read the safety precautions before use. Thank you for your purchase. This user manual contains important information on avoiding damage and personal

More information

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT PLAT HAZARD AD EQUIPMET RISK ASSESSMET Plant Identification : HAULOTTE STAR 10 Potential Hazard Entanglement Can anything become entangled in moving parts? Crushing/Striking Can anyone be crushed or struck

More information

Operating Instructions and Parts Manual 24529

Operating Instructions and Parts Manual 24529 Please read and save these instructions. Read through this owner s manual carefully before using product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure

More information

A17W49_MASEM_F_EN MANUAL

A17W49_MASEM_F_EN MANUAL AW9_MASEM_F_EN MANUAL CONTENTS Identification. Manufacturer. Product name. Year of manufacture. Area of use. Declaration of conformity Technical specification. Design. Function. Technical data. Electrical

More information

Material Lift Risk and Hazard Management

Material Lift Risk and Hazard Management Material Lift Risk and Hazard Management Models GH 3.8 Safe 136 kg Maximum 3.80 m GH5.6 Working 113 kg Lifting 5.60 m LL Load (kg) 91 kg Height (m) 1.70 m GL-4 227 kg 1.80 m GL-8 181 kg 3.06 m GL-10 159

More information

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT PLAT HAZARD AD EQUIPMET RISK ASSESSMET Plant Identification : HAULOTTE OPTIMUM 8.1 Potential Hazard Entanglement Can anything become entangled in moving parts? Crushing/Striking Can anyone be crushed or

More information

MAGICFX CONFETTIPISTOL USER AND INSTALLATION MANUAL

MAGICFX CONFETTIPISTOL USER AND INSTALLATION MANUAL English MAGICFX CONFETTIPISTOL USER AND INSTALLATION MANUAL CONFETTI FX / STREAMER FX Manual trigger PART01129 rev 01-00 DISCLAIMER WARNING Read this manual carefully before installing and/or using this

More information

SAFETY MANAGEMENT SYSTEM

SAFETY MANAGEMENT SYSTEM Equipment Location: Hazard Hired From All Master Hire Stores Entanglement Can anyone s hair, clothing, gloves, necktie, jewellery, cleaning brushes, rags or other materials become entangled with moving

More information

Measurement accessories METPOINT OCV for the measurement in systems up to 40 bar

Measurement accessories METPOINT OCV for the measurement in systems up to 40 bar EN - english Instructions for installation and operation Measurement accessories METPOINT OCV for the measurement in systems up to 40 bar Dear customer, Thank you for deciding in favour of the METPOINT

More information

PLANT/EQUIPMENT/ASSET HAZARD REPORT

PLANT/EQUIPMENT/ASSET HAZARD REPORT Asset Description: EL-08001-011 : Harrison 550 CNC Lathe Large Sale Type For what use is this asset being sold? Re-Use þ Spare Parts Scrap Note 1: Assets are sold only for the use indicated. Any other

More information

PLANT RISK ASSESSMENT

PLANT RISK ASSESSMENT PLANT RISK ASSESSMENT Forktruck: Year of Manufacture Make: Model: Serial : TCM FD30T3 Attachment: Name: Mfg: Model : Owner: Business/Organisation: Address: This header page and the following 5 pages have

More information

OC4000 USER'S GUIDE I O OXYGEN CONCENTRATORS OXYGEN CONCENTRATOR FOR VETERINARY USE ONLY GLOSSARY OF SYMBOLS. : ON (power switched on)

OC4000 USER'S GUIDE I O OXYGEN CONCENTRATORS OXYGEN CONCENTRATOR FOR VETERINARY USE ONLY GLOSSARY OF SYMBOLS. : ON (power switched on) OXYGEN CONCENTRATORS USER'S GUIDE OC4000 OXYGEN CONCENTRATOR FOR VETERINARY USE ONLY I O : ON (power switched on) : OFF (power switched off) : Class II protection : Do not expose to open flames GLOSSARY

More information

VS18/26 with PROFINET and EtherNet/IP Interface. ATEX Installation Instructions

VS18/26 with PROFINET and EtherNet/IP Interface. ATEX Installation Instructions VS18/26 with PROFINET and EtherNet/IP Interface ATEX Installation Instructions INDEX 1. INTENDED USAGE 3 2. OPERATING MANUAL ATEX 4 2.1 General conditions 4 2.2 Installation 5 2.3 Operating 5 2.4 Failures

More information

Print this activity then complete it and keep it as evidence in your folder, or portfolio.

Print this activity then complete it and keep it as evidence in your folder, or portfolio. Workplace hazards Workplace Learning and Assessment Activity Workplace Learning and Assessment Activity Print this activity then complete it and keep it as evidence in your folder, or portfolio. Hazard

More information

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT Plant Identification : HAULOTTE LIGHT BOOMS 3522A (HTA 13P); 4527A (HTA 16P); 5533A (HTA 19P) and 3632T (HTT 13) Potential Hazard Entanglement Can anything become entangled in moving parts? Crushing/Striking

More information

03/07/2014 V

03/07/2014 V 03/07/2014 V1-03072014 General safety This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge

More information

SAFETY MANAGEMENT SYSTEM

SAFETY MANAGEMENT SYSTEM Equipment Location: Hazard Entanglement Hired From All Master Hire Stores Can anyone s hair, clothing, gloves, necktie, jewellery, cleaning brushes, rags or other materials become entangled with moving

More information

Department of Electrical Engineering & Computer Science. Electrical Safety. for Staff and Students in EECS Instructional Laboratories

Department of Electrical Engineering & Computer Science. Electrical Safety. for Staff and Students in EECS Instructional Laboratories NEVER WORK ALONE Department of Electrical Engineering & Computer Science Electrical Safety for Staff and Students in EECS Instructional Laboratories If you will be working with energized circuits or equipment

More information

MATERIAL SAFETY DATA SHEET (conforming to E.E.C. directive 2001/58) DW DESCALER Date of print 13/07/15 date / revised : Page 1

MATERIAL SAFETY DATA SHEET (conforming to E.E.C. directive 2001/58) DW DESCALER Date of print 13/07/15 date / revised : Page 1 Date of print 13/07/15 date / revised : 12-03-2007 Page 1 1. SUBSTANCE/PREPARATION AND COMPANY IDENTIFICATION 1.1 Product name : 1.2 Use: Scale remover powder for dishwashers 1.3 Company data : 1.3.1 Name

More information

Managing for Liability Avoidance. (c) Lewis Bass

Managing for Liability Avoidance. (c) Lewis Bass Managing for Liability Avoidance (c) Lewis Bass 2005 1 Staying Safe in an Automated World Keys to Automation Safety and Liability Avoidance Presented by: Lewis Bass, P.E. Mechanical, Industrial and Safety

More information

OC4000 USER'S GUIDE I O OXYGEN CONCENTRATOR FOR VETERINARY USE ONLY. by Supera Anesthesia Innovations GLOSSARY OF SYMBOLS. : ON (power switched on)

OC4000 USER'S GUIDE I O OXYGEN CONCENTRATOR FOR VETERINARY USE ONLY. by Supera Anesthesia Innovations GLOSSARY OF SYMBOLS. : ON (power switched on) by Supera Anesthesia Innovations USER'S GUIDE OC4000 OXYGEN CONCENTRATOR FOR VETERINARY USE ONLY I O : ON (power switched on) : OFF (power switched off) : Class II protection : Do not expose to open flames

More information

SAFETY MANAGEMENT SYSTEM

SAFETY MANAGEMENT SYSTEM Equipment Location: Hazard Hired From All Master Hire Stores Entanglement Can anyone s hair, clothing, gloves, necktie, jewellery, cleaning brushes, rags or other materials become entangled with moving

More information

Procedure: Work health and safety hazard management

Procedure: Work health and safety hazard management Procedure: Work health and safety hazard management Purpose This procedure describes how the Australian National University (ANU) manages Work Health Safety hazards for the health, safety, rehabilitation

More information

PLANT/EQUIPMENT/ASSET HAZARD REPORT

PLANT/EQUIPMENT/ASSET HAZARD REPORT Asset Description: EL-09100-060 : Gantry hoist system Sale Type For what use is this asset being sold? Re-Use Spare Parts Scrap Note 1: Assets are sold only for the use indicated. Any other use is at the

More information

User Manual PTW-DensiX. D / Di/Zi

User Manual PTW-DensiX. D / Di/Zi User Manual PTW-DensiX D148.131.0/3 2005-05 Di/Zi General Information General Information The product bears the CE-mark "CE-0124" in accordance with the Council Directive 93/42/EEC about Medical Devices

More information

Pressure Automated Calibration Equipment

Pressure Automated Calibration Equipment GE Measurement & control Pressure Automated Calibration Equipment Safety Instructions and User Guide - K0447 PACE5000 PACE6000 K0447 Issue No. 9 1 10 1 PACE5000 1 2 3 4 5 PACE6000 2 6 7 8 3 4 5 6 7 8 9

More information

Suitability of Work Equipment

Suitability of Work Equipment These regulations came into effect on the 5th December 1998 and replace PUWER 1992. They cover almost all equipment used at work, including tool box tools such as hammers, knives etc. They also cover machinery

More information

POLICY FOR THE CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH (COSHH)

POLICY FOR THE CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH (COSHH) POLICY FOR THE CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH (COSHH) INTRODUCTION & LEGISLATION Using chemicals or other hazardous substances at work can put people s health at risk. The law requires employers

More information

Manually Propelled Risk and Hazard Management

Manually Propelled Risk and Hazard Management Manually Propelled Risk and Hazard Management Models AWP-20S Safe 159 Maximum N/A Maximum 6.12 AWP-25S Working 159 Platform N/A Working 7.57 AWP-30S Load (kg) 159 Height (m) N/A Height (m) 9.00 AWP-36S

More information

Recognition, Evaluation, and Control of Hazards

Recognition, Evaluation, and Control of Hazards Recognition, Evaluation, and Control of Hazards Latest revised date: October 26, 2011 Page 1 of 8 1.0 Introduction Memorial University has established a system for the recognition, evaluation, and control

More information

COMPLETION OF PROCEDURE ASSESSMENT FORM (COSHH RELATED) GUIDANCE NOTES (Version 3)

COMPLETION OF PROCEDURE ASSESSMENT FORM (COSHH RELATED) GUIDANCE NOTES (Version 3) COMPLETION OF PROCEDURE ASSESSMENT FORM (COSHH RELATED) GUIDANCE NOTES (Version 3) The following guidance notes accompany the College Procedure Assessment form (COSHH-related). Please complete all applicable

More information

MS-H-S10/MS-M-S10 Hotplate/Magnetic Stirrer

MS-H-S10/MS-M-S10 Hotplate/Magnetic Stirrer MS-H-S10/MS-M-S10 Hotplate/Magnetic Stirrer User Manual MS-H-S10 10-Channel Analog Hotplate Magnetic Stirrer MS-M-S10 10-Channel Analog Hotplate Magnetic Stirrer Please read the User Manual and the related

More information

Health and Safety Guidance Note No 37

Health and Safety Guidance Note No 37 Health and Safety Guidance Note No 37 THE SAFE USE AND STORAGE OF GAS CYLINDERS Accidents involving gas cylinders can cause serious injury or even death. The legal term for gas cylinders is transportable

More information

Safety Services Guidance. Guidance on: The Provision and Use of Work Equipment Regulations 1998 (PUWER)

Safety Services Guidance. Guidance on: The Provision and Use of Work Equipment Regulations 1998 (PUWER) Guidance on: The Provision and Use of Work Equipment Regulations 1998 (PUWER) Key word(s) : Work equipment. Using, maintaining and repairing. Information, instruction and supervision. Risk Assessment.

More information

OPERATION MANUAL PNEUMATIC VALVES

OPERATION MANUAL PNEUMATIC VALVES OPERATION MANUAL PNEUMATIC VALVES DIRECTIVE 2014/34/EU ATEX ENGLISH Index 1 Product identification 2 Security 3 Guarantee 4 Transportation 5 Assemblage 6 Setting up 7 Adjustments 8 Technical information

More information

Rigel 601 CHECKBOX. Instruction Manual. 348A551 Issue 2.0. April Seaward Electronic Ltd. Issue 2.0

Rigel 601 CHECKBOX. Instruction Manual. 348A551 Issue 2.0. April Seaward Electronic Ltd. Issue 2.0 Rigel 601 CHECKBOX Instruction Manual 348A551 Issue 2.0 April 2006 2006 Seaward Electronic Ltd. Issue 2.0 Limited Warranty & Limitation of Liability Rigel Medical guarantees this product for a period of

More information

STAGE, STADIUM & X-TREME SHOT.

STAGE, STADIUM & X-TREME SHOT. USER AND INSTALLATION MANUAL ENGLISH STAGE, STADIUM & X-TREME SHOT. CONFETTI & STREAMER FX PART01339 rev 01-00 DISCLAIMER WARNING Read this manual carefully before installing and/or using this product.

More information

Risk Management File (short example) Cybathlon Fan. Created by. Responsibility and Approval. Version 1.0

Risk Management File (short example) Cybathlon Fan. Created by. Responsibility and Approval. Version 1.0 Risk Management File (short example) Device name: Cybathlon Fan Document version number: Version 1.0 Created by Name and address of manufacturer: ETH Zürich Sensory-Motor Systems Lab Tannenstrasse 1 CH-8092

More information

Dual Release Walkers 6291 Series. 1 General. 1 Dual Release Walkers. 1.1 Symbols WARNING

Dual Release Walkers 6291 Series. 1 General. 1 Dual Release Walkers. 1.1 Symbols WARNING User Manual DEALER: This manual MUST be given to the user of the product. USER: BEFORE using this product, read this manual and save for future reference. Dual Release Walkers 6291 Series EN User Manual...page

More information

FPG8601 Force Balanced Piston Gauge

FPG8601 Force Balanced Piston Gauge FPG8601 Force Balanced Piston Gauge Reference Level Calibration System for very low pressure Pressure range: 0 to 15 kpa gauge, absolute and absolute differential Standard resolution: 0.010 Pa, high resolution

More information

MP15 Jockey Pump Controller

MP15 Jockey Pump Controller Setup and Operating Instructions MP15 Jockey Pump Controller This manual provides general information, installation, operation, maintenance, and system setup information for Metron Model MP15 Jockey Pump

More information

Portable Electric Tools

Portable Electric Tools A Health and Safety Guideline for Your Workplace Types Portable electric tools commonly used in industry are: drills, saws, sanders, buffers, grinders, impact wrenches, planers. Hazards The hazards associated

More information

Title: Plant and Equipment Risk Management Form Issue Date: Review Date: Page Number: 1 of 11

Title: Plant and Equipment Risk Management Form Issue Date: Review Date: Page Number: 1 of 11 Issue Date: Review Date: Page Number: 1 of 11 1. Hazard Management Details General Plant/Equipment Item: WOOD LATHE Make/Model No.: Serial No.: School: Work Location: Name of Person(s) Conducting Activity:

More information

DUAL ACTION SANDER MODEL NO: CAT121 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0211

DUAL ACTION SANDER MODEL NO: CAT121 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0211 DUAL ACTION SANDER MODEL NO: CAT121 PART NO: 3110877 OPERATION & MAINTENANCE INSTRUCTIONS LS0211 INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use this product, please

More information

Safety data sheet pursuant to ordinance (EC) No. 453/2010 (EC) No. 1907/2006 (REACH)

Safety data sheet pursuant to ordinance (EC) No. 453/2010 (EC) No. 1907/2006 (REACH) Print date: 02/03/2016 Page 1 1. DESIGNATION OF THE MATERIAL OR MIXTURE AND COMPANY NAME 1.1 Product identifier Product name Trade name CAS No. EC No. Lead-free electronic solder Art. No. 150152/150154/150156/150158/150162/150164

More information

Lockout/Tagout CE Marking Requirements WHITE PAPER

Lockout/Tagout CE Marking Requirements WHITE PAPER The CE mark is used to assert that a particular product meets one or more of just over 20 European Directives. (IE: EMC Directive, Machinery Directive, Safety of Toys, etc). Taking into consideration the

More information

Western Sydney University Safety Inspection Checklist - Laboratory Environments

Western Sydney University Safety Inspection Checklist - Laboratory Environments Western Sydney University Safety Inspection Checklist - Laboratory Environments Useful Hint: To maximise the benefits that can be gained from a workplace inspection activity read the Western Sydney University

More information

Operating Manual VSA100A. tina29e1 ( )

Operating Manual VSA100A. tina29e1 ( ) Operating Manual Incl. EU Declaration of Conformity Vacuum Switch VSA100A tina29e1 (2017-05) 1 Product Identification In all communications with INFICON, please specify the information on the product nameplate.

More information

BRAKE WINCH RUP 503-[T/BT] EQUIPMENT FOR LIFTING LOADS. AT 053-[T/BT] xx

BRAKE WINCH RUP 503-[T/BT] EQUIPMENT FOR LIFTING LOADS. AT 053-[T/BT] xx Reference number: BRAKE WINCH RUP 503-[T/BT] EQUIPMENT FOR LIFTING LOADS DESIGNATED USE The brake winch RUP 503-[...]T series is a load lifting / lowering device. Device is equipped with safety brake for

More information

PLEASE READ CAREFULLY BEFORE INSTALLING OR USING MEGA POOL SAVER MPS 1100

PLEASE READ CAREFULLY BEFORE INSTALLING OR USING MEGA POOL SAVER MPS 1100 MPS-1100 User Manual Mega Pool Saver Ltd PLEASE READ CAREFULLY BEFORE INSTALLING OR USING MEGA POOL SAVER MPS 1100 For further up to date instructions on how to install Mega Pool Saver MPS 1100, please

More information

Customer Responsibilities. Important Customer Information. Cary 4000/5000/6000i UV-Vis spectrophotometer Site Preparation Checklist

Customer Responsibilities. Important Customer Information. Cary 4000/5000/6000i UV-Vis spectrophotometer Site Preparation Checklist Thank you for purchasing an Agilent instrument. To get you started and to assure a successful and timely installation, please refer to this specification or set of requirements. Correct site preparation

More information

Annual Inspection Came &

Annual Inspection Came & Annual Inspection Came & Company @ Marchwood under 12's Play Area,,,,, t: 01202 590675 f: 0870 428 3942 e: info@playinspections.co.uk w: www.playinspections.co.uk Risk Assessment Matrix Probability>> 5

More information

Instruction Manual BA90 Precision Barometer

Instruction Manual BA90 Precision Barometer Instruction Manual BA90 Precision Barometer halstrup-walcher GmbH Stegener Straße 10 D-79199 Kirchzarten Germany Phone: +49 (0) 76 61/39 63 0 Fax: +49 (0) 76 61/39 63 99 E-Mail: info@halstrup-walcher.com

More information

Type BBS-03, BBS-05, BBS-06, BBS-25

Type BBS-03, BBS-05, BBS-06, BBS-25 Type BBS-03, BBS-05, BBS-06, BBS-25 Sterile connection elements Sterile Verbindungselemente Raccords union stériles Operating Instructions Bedienungsanleitung Manuel d utilisation 1. THE OPERATING INSTRUCTIONS

More information

Pre-filter for Brushless Blower Instruction Manual

Pre-filter for Brushless Blower Instruction Manual Pre-filter for Brushless Blower 781-70-702 Instruction Manual Minebea Co., Ltd. Industrial Machinery Business Unit 251-8531 1-1-1 Katase,Fujisawa,kanagawa Contact Us Industrial Machinery Product Sales

More information

SAFETY MANAGEMENT SYSTEM

SAFETY MANAGEMENT SYSTEM Equipment Location: Hazard Hired From All Master Hire Stores Entanglement Can anyone s hair, clothing, gloves, necktie, jewellery, cleaning brushes, rags or other materials become entangled with moving

More information

Type 0404 / /2-way solenoid valve 2/2-Wege-Magnetventil Électrovanne 2/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation

Type 0404 / /2-way solenoid valve 2/2-Wege-Magnetventil Électrovanne 2/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation Type 0404 / 5404 2/2-way solenoid valve 2/2-Wege-Magnetventil Électrovanne 2/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation 1 OPERATING INSTRUCTIONS The operating instructions

More information

1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 2. HAZARDS IDENTIFICATION

1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 2. HAZARDS IDENTIFICATION SAFETY DATA SHEET 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 PRODUCT IDENTIFIER: PRODUCT CODE: 132664 Chemical Name: Polyetherpolysiloxan 1.2 1.3 1.4 RELEVANT IDENTIFIED

More information

IMMANUEL CHURCH, CHICHESTER HEALTH AND SAFETY POLICY

IMMANUEL CHURCH, CHICHESTER HEALTH AND SAFETY POLICY IMMANUEL CHURCH, CHICHESTER HEALTH AND SAFETY POLICY Approved by the Trustees: November 2016 Health and Safety Policy Introduction The main piece of health and safety legislation is the Health and Safety

More information

PLANT/EQUIPMENT/ASSET HAZARD REPORT

PLANT/EQUIPMENT/ASSET HAZARD REPORT Asset Description: EL-0001-003 - Overhead Transfer System and EMS. Sale Type For what use is this asset being sold? Re-Use Spare Parts Scrap Note 1: Assets are sold only for the use indicated. Any other

More information

USER MANUAL. JET TST and JET TST S.

USER MANUAL. JET TST and JET TST S. USER MANUAL JET TST and JET TST S www.sisteven.com Types of Jet fans: JET TST UNI: Impulse axial fan single direction JET TST S UNI: Impulse axial fan single direction (short case) JET TST REV: Impulse

More information

EHS Workplace Inspection Checklist (Ref. SOP QMS-080; EHS-010)

EHS Workplace Inspection Checklist (Ref. SOP QMS-080; EHS-010) (Ref. SOP QMS-080; EHS-010) Form-445 Inspected by: Date of inspection Date of Report Report # Pages Area Manager: Area Inspected: General This EHS Workplace Inspection was conducted by: Scope of the Inspection:

More information

in Australian Workplaces

in Australian Workplaces Copyright 2011 - OnGuard Safety Training Pty Ltd 1 of 7 in Australian Workplaces Introduction Part 2 Part 3 Part 4 Part 5 SafeWork SA Introduction Hazard identification is the process used to identify

More information

PERSONAL PROTECTIVE EQUIPMENT GUIDANCE

PERSONAL PROTECTIVE EQUIPMENT GUIDANCE Legislation requires a workplace to identify and assess significant hazards (via a risk assessment) associated with workplace activities. The purpose of the assessment is to enable a valid decision about

More information

OSAT Series. Intrinsically Safe Infrared Temperature Sensor Operator's Guide

OSAT Series. Intrinsically Safe Infrared Temperature Sensor Operator's Guide OSAT Series Intrinsically Safe Infrared Temperature Sensor Operator's Guide Issue L Jan 2017 Introduction OSAT Series intrinsically safe non-contact infrared temperature sensors measure the temperature

More information

Glass Ionomer Cement - Liquid

Glass Ionomer Cement - Liquid Glass Ionomer Cement - Liquid SECTION 1: Identification 1.1 Product Identifier: Silmet Glass Ionomer Cement liquid component 1.2 Relevant identified uses of the substances or mixture Product Use: Indications:

More information

Type Operating Instructions. 2/2-way solenoid valve 2/2-Wege Magnetventil Electrovanne 2/2 voies.

Type Operating Instructions. 2/2-way solenoid valve 2/2-Wege Magnetventil Electrovanne 2/2 voies. 2/2-way solenoid valve 2/2-Wege Magnetventil Electrovanne 2/2 voies We reserve the right to make technical changes without notice. Technische Änderungen vorbehalten. Sous réserve de modifications techniques.

More information

PROPORTIONING VALVE. Model 150 INSTRUCTION MANUAL. March 2017 IMS Company Stafford Road

PROPORTIONING VALVE. Model 150 INSTRUCTION MANUAL. March 2017 IMS Company Stafford Road PROPORTIONING VALVE Model 150 INSTRUCTION MANUAL March 2017 IMS Company 10373 Stafford Road Telephone: (440) 543-1615 Fax: (440) 543-1069 Email: sales@imscompany.com 1 Introduction IMS Company reserves

More information

SAUTER FK Version /2016 GB

SAUTER FK Version /2016 GB Sauter GmbH Ziegelei 1 D-72336 Balingen E-Mail: info@sauter.eu Tel: +49-[0]7433-9933-199 Fax: +49-[0]7433-9933-149 Internet: www.sauter.eu Instruction Manual Digital Force Gauge SAUTER FK Version 1.4 12/2016

More information

POLYPIPE BUILDING PRODUCTS LTD MATERIAL SAFETY DATA SHEET. Polypipe Building Products High Density Polyethylene (HDPE) Pipe

POLYPIPE BUILDING PRODUCTS LTD MATERIAL SAFETY DATA SHEET. Polypipe Building Products High Density Polyethylene (HDPE) Pipe Page: 1 of 5 1: IDENTIFICATION OF THE SUBSTANCE / MIXTURE 1.1 Product Identity Product Name: Polypipe Building Products High Density Polyethylene (HDPE) Pipe 1.2 Relevant Identified Uses: Recommended use:

More information

Personal Protective Equipment

Personal Protective Equipment Northland Community & Technical College June 1, 2017 Personal Protective Equipment Safety Officer Cory Feller Chemical Hygiene Officer Kristel Kizer Telephone: 218-683-8633 1 Personal Protective Equipment

More information

Operation and Maintenance manual Issue No: 1 Issue Date: 4th September 2007

Operation and Maintenance manual Issue No: 1 Issue Date: 4th September 2007 Operation and Maintenance manual Document Title: Purewater CWST O&M Issue No: 1 Issue Date: 4th September 2007 This manual is to be used in conjunction with the following products manufactured by Purewater

More information

Pectoral Machine. User manual E S S E N T I A L S T R E N G T H

Pectoral Machine. User manual E S S E N T I A L S T R E N G T H E L E M E N T and the cable E S S E N T I A L S T R E N G T H User manual 1 and the cable and The identification plate of and manufacturer, affixed on the back panel of the weight stack, gives the following

More information

Digital Melting Point Apparatus

Digital Melting Point Apparatus Digital Melting Point Apparatus Heating Plateau Ramping Start/Stop Plateau set Ramp stop Hold User Guide Version 1.1 Heating Viewing tube Sample Chamber IEC power inlet socket Power on/off Temperature

More information

NOTE: Parts are no longer available for this tool. The manual will continue on the next page.

NOTE: Parts are no longer available for this tool. The manual will continue on the next page. NOTE: Parts are no longer available for this tool. The manual will continue on the next page. Form Z455 Date 12-97/D Page 1 of 6 INSTRUCTIONS & PARTS LIST FOR SIOUX 8200 POLISHER GENERAL SAFTEY RULES READ

More information

Type /2-Way Globe Valve 3/2-Wege-Geradsitzventil Vanne à siège droit 3/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation

Type /2-Way Globe Valve 3/2-Wege-Geradsitzventil Vanne à siège droit 3/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation 3/2-Way Globe Valve 3/2-Wege-Geradsitzventil Vanne à siège droit 3/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation We reserve the right to make technical changes without notice.

More information

Process Safety Management Of Highly Hazardous Chemicals OSHA 29 CFR

Process Safety Management Of Highly Hazardous Chemicals OSHA 29 CFR Process Safety Management Of Highly Hazardous Chemicals OSHA 29 CFR 1910.119 PSM - Definition Not all refining hazards are caused by the same factors or involve ve the same degree of potential damage.

More information

PORTABLE WORK LIGHT MODEL NO: CL6FS OPERATION INSTRUCTIONS PART NO: GC0315

PORTABLE WORK LIGHT MODEL NO: CL6FS OPERATION INSTRUCTIONS PART NO: GC0315 PORTABLE WORK LIGHT MODEL NO: CL6FS PART NO: 4003530 OPERATION INSTRUCTIONS GC0315 INTRODUCTION Thank you for purchasing this CLARKE Worklight. Before attempting to use this product, please read this manual

More information

CJMJ.DPNQBDU. Instruction for use. Neonatal phototherapy device. BILI-COMPACT WY 1816/ Year of manufacture D2017_00

CJMJ.DPNQBDU. Instruction for use. Neonatal phototherapy device. BILI-COMPACT WY 1816/ Year of manufacture D2017_00 Instruction for use Neonatal phototherapy device CJMJ.DPNQBDU D2017_00 GmbH > BILI-COMPACT WY 1816/ Year of manufacture Herrenhöhe 4 D-51515 Kürten/Germany 02207-9698-0 02207-4750 E-mail: info@weyermed.com

More information

Reliability Engineering. Module 3. Proactive Techniques - Definitions

Reliability Engineering. Module 3. Proactive Techniques - Definitions Reliability Engineering Module 3 1 Proactive Techniques - Definitions Functional Failure: The inability of an asset to meet a desired standard of performance. Failure Cause: The circumstances during design,

More information

INSTALLATION COMMISSIONING, OPERATION & MAINTENANCE MANUAL

INSTALLATION COMMISSIONING, OPERATION & MAINTENANCE MANUAL WedgeRock RW Series Worm Gear Actuators INSTALLATION COMMISSIONING, OPERATION & MAINTENANCE MANUAL Revision 01 Date 4/3/17 Page 1 Table of Contents 1.0 INTRODUCTION... 4 1.1 PURPOSE... 4 1.2 AUDIENCE...

More information

VENTI-O 2 plus. O 2 switching valve for: VENTImotion from serial number 4000 VENTIlogic from serial number 4000 VENTImotion 2

VENTI-O 2 plus. O 2 switching valve for: VENTImotion from serial number 4000 VENTIlogic from serial number 4000 VENTImotion 2 VENTI-O 2 plus O 2 switching valve for: VENTImotion from serial number 4000 VENTIlogic from serial number 4000 VENTImotion 2 Device description and operating instructions Overview VENTI-O 2 plus with therapy

More information

Ceiling Lift. Arm Extension OWNER S MANUAL

Ceiling Lift. Arm Extension OWNER S MANUAL Ceiling Lift Arm Extension OWNER S MANUAL Part No. 001091-EN, Rev.000 07-m02-2017 2 IMPORTANT Be sure to read this entire manual before using the arm extension. The information in this manual is important

More information

FastStart PCR Master 2,5 ml

FastStart PCR Master 2,5 ml 1. Identification of the substance/mixture and of the company/undertaking 1.1 Product identifier Commercial Product Name : Mat.-No./ Genisys-No. : 04710436001 1.2 Relevant identified uses of the substance

More information

Assessment Checklist. Project. Name: Created: Machine Details. Serial Number: Type: Model: Manufacturer: Power Supply: Location: Building: Area:

Assessment Checklist. Project. Name: Created: Machine Details. Serial Number: Type: Model: Manufacturer: Power Supply: Location: Building: Area: Project Name: Created: Machine Details Serial Number: Type: Model: Manufacturer: Power Supply: Location: Building: Area: Date Assessed: Team: tes: Printed on: 0 July 0 Powered by mcom So ware from TÜV

More information

Risk Management Series Article 8: Risk Control

Risk Management Series Article 8: Risk Control Risk Management Series Foreword MEDIcept presents this ongoing series of articles focused on the implementation and practical conduct of risk management in the medical device industry to provide practitioners

More information

SA121, SA122, SA123, SA128 and SA1219 Self-acting Temperature Control Systems (Knob Adjustment)

SA121, SA122, SA123, SA128 and SA1219 Self-acting Temperature Control Systems (Knob Adjustment) 3810050/5 IM-P381-01 CH Issue 5 SA121, SA122, SA123, SA128 and SA1219 Self-acting Temperature Control Systems (Knob Adjustment) Installation and Maintenance Instructions 1. Safety information 2. Use 3.

More information

Calibration Gas Instrument INSTRUCTION MANUAL. Release I. Advanced Calibration Designs, Inc.

Calibration Gas Instrument INSTRUCTION MANUAL. Release I. Advanced Calibration Designs, Inc. Advanced Calibration Designs, Inc. Calibration Gas Instrument INSTRUCTION MANUAL Release I www.goacd.com Instruction Manual Gas Generator Release I TABLE OF CONTENTS I. General Description Page 2 II. Start-Up

More information

Hazard Training Guide

Hazard Training Guide Hazard Training Guide Using the Main Application v1.5 WHS Version Control Document Title: Hazard Training Guide using the Main Application Document Issue: Version 1.5 Date Issued: 12 Aug 2014 Issue Date

More information

CONTRACTOR WHS HAZARD STANDARD HAZARDOUS CHEMICALS EXTERNAL USE ONLY

CONTRACTOR WHS HAZARD STANDARD HAZARDOUS CHEMICALS EXTERNAL USE ONLY CONTRACTOR WHS HAZARD STANDARD HAZARDOUS CHEMICALS EXTERNAL USE ONLY Principles in the Optus Contractor WHS management process CONTRACTOR MANAGEMENT STAGES PRINCIPLES THIS STANDARD REQUISITION Requisition

More information

EC214 EC215 - EC215R Bench Conductivity Meters

EC214 EC215 - EC215R Bench Conductivity Meters Instruction Manual EC214 EC215 - EC215R Bench Conductivity Meters http://www.hannainst.com These Instruments are in Compliance with the CE Directives Dear Customer, Thank you for choosing a Hanna Instruments

More information

Electrical, electronic and control engineering at the operational level

Electrical, electronic and control engineering at the operational level STCW Code Table A-III/6 Specification of minimum standard of for electro-technical officers Ref: https://www.edumaritime.net/stcw-code Source: IMO Function: Electrical, electronic and control engineering

More information

Operation Manual. Nano-MQS Hand Tool 0,13-0,35 mm². en (Translation of the original German version) 1/17

Operation Manual. Nano-MQS Hand Tool 0,13-0,35 mm². en (Translation of the original German version) 1/17 Nano-MQS Hand Tool 0,13-0,35 mm² Customer Manual Nr.: Customer Manual PN: Language: 411-18538-1 en (Translation of the original German version) 1/17 The data specified above only serve to describe the

More information

micro CA-100 Inspection Camera

micro CA-100 Inspection Camera micro CA-100 Operator s Manual micro CA-100 Inspection Camera! Read this Operator s Man ual carefully before using this tool. Failure to understand and follow the contents of this manual may result in

More information

Risk and Hazard Management

Risk and Hazard Management Risk and Hazard Management Models GS1532 Safe 272 Maximum 4.6 Maximum 6.6 GS1930 Working 227 Platform 5.8 Working 7.8 GS1932 Load (kg) 227 Drive 5.8 Height (m) 7.8 GS2032 363 Height (m) 6.1 8.1 GS2632

More information

E2K-L. Liquid Level Sensor That Is Unaffected by the Color of the Pipe or Liquid. Liquid Level Sensor. Ordering Information

E2K-L. Liquid Level Sensor That Is Unaffected by the Color of the Pipe or Liquid. Liquid Level Sensor. Ordering Information Liquid Level EK-L CSM_EK-L_DS_E 3 Liquid Level That Is Unaffected by the Color of the or Liquid Mount to bypass pipes. Fit a wide range of pipe diameters: 8 to mm or to mm Built-in Amplifiers to save space.

More information

PLANNED LIGHTING MAINTENANCE LTD METHOD STATEMENT & RISK ASSESSMENT REPLACEMENT OF LAMPS OR REPAIRS TO HIGH LEVEL LIGHT UNITS

PLANNED LIGHTING MAINTENANCE LTD METHOD STATEMENT & RISK ASSESSMENT REPLACEMENT OF LAMPS OR REPAIRS TO HIGH LEVEL LIGHT UNITS PLANNED LIGHTING MAINTENANCE LTD METHOD STATEMENT & RISK ASSESSMENT REPLACEMENT OF LAMPS OR REPAIRS TO HIGH LEVEL LIGHT UNITS Project: (insert Client) Replacement/ Repair of high level light units/ high

More information

Operating Instructions of BROSA tension load cells, types 0111, 0113

Operating Instructions of BROSA tension load cells, types 0111, 0113 Operating Instructions of BROSA tension load cells, types 0, 03. Description of BROSA tension load cells. Structure and function The BROSA type 0 and 03 tension load cells transmit and measure the tensile

More information

BT6HC Hygienic Sanitary Balanced Pressure Steam Trap for High Capacity and CIP/SIP Applications

BT6HC Hygienic Sanitary Balanced Pressure Steam Trap for High Capacity and CIP/SIP Applications 1800350/6 IM-P180-12 ST Issue 6 BT6HC Hygienic Sanitary Balanced Pressure Steam Trap for High Capacity and CIP/SIP Applications Installation and Maintenance Instructions 1. Safety information 2. General

More information

Product Name: Angel Anchor

Product Name: Angel Anchor Product Name: Angel Anchor Part #: 00260 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction 1 Applicable Safety Standards

More information