LOOK. THINK. DO. Basic Workplace Safety and Health (WSH) Rules 6for Working at Heights. Secure safety harness when working at heights.
|
|
|
- Anis Reeves
- 5 years ago
- Views:
Transcription
1 6for Working at Heights Falls are the leading cause of workplace fatalities in Singapore. Every month, one worker dies from falling from buildings, structures and ladders. Do your risk assessment before starting work. Secure safety harness when working at heights. Use proper access and egress. Do not climb or stretch over guard rails. Keep work area clear of tripping objects. Always maintain 3-point contact when using ladders. Learn more about working safely at heights at
2 6for Working on Roofs Working on roofs is a high-risk activity and falling from roofs can cause serious injuries or death. Every year, 2 workers die and 21 others are injured falling from roofs. Do your risk assessment before starting work. Use proper access and egress for roof works. Check for roof edge protection such as guardrails. Secure safety harness when working on roofs. Do not step on fragile roof surfaces. Look out for openings. Learn more from the WSH Guidelines on Working Safely on Roofs at
3 6for Working with Machines Moving machine parts can cause death or serious injuries such as crushed limbs and amputations. Every year, 2 workers die and 1,000 workers are injured while working with machines. Do your risk assessment before starting work. Make sure all moving parts are guarded. Stop the machine if it is not working properly. Lock-out and tag-out before repair and maintenance. STOP Be trained and competent before operating any machine. Use the right personal protective equipment.? Learn more from the WSH Guidelines on Safe Use of Machinery at
4 6 for Traffic Management assessment before starting work. Poor traffic management at work can lead to severe injuries or even death. Every year, 5 workers die and 326 workers are injured from being hit by moving vehicles. Do your risk Use designated pedestrian walkways. Use handbrake and wheel chocks when parking. Drive within the workplace speed limit km/h 15 km/h 15 Check blind spots before reversing. Cordon off work zone from traffic. Learn more from the WSH Guidelines on Workplace Traffic Safety Management at
5 6 for Use of Electrical Equipment Overloading power points, improper earthing and wet surroundings can cause serious injuries and even death to workers. Every year, 2 workers die and 23 workers are injured from exposure to electric current. Do your risk assessment before starting work. Ensure correct wiring and proper earthing.* Make sure equipment is in good condition before use. Do not overload power sockets. Dry your hands before touching equipment. Use the right personal protective equipment. Learn more from Energy Market Authority s Guide on Electrical Safety at *L: live wire, N: neutral wire, :earth wire
6 6for Lifting Operations Lifting operations are high risk activities. Every year, 5 workers die from unsafe lifting operations. Do your risk assessment before starting work. if you feel unwell. Follow the lifting plan and instructions closely.?? PLAN Report any defective lifting gear to your supervisor. Fully extend all lorry crane outriggers on firm level ground. Balance and rig the load securely before lifting. Barricade lifting zone and do not suspend loads over persons. Learn more from the Code of Practice on Safe Lifting Operations in the Workplaces at
7 6 for Loading on Vehicles The consequences of unsafe loading practices can be hazardous and even fatal. Every year, 6 workers die from unsafe loading and unloading practices. Do your risk assessment before starting work. Use handbrake and wheel chocks when parking. Fully extend all lorry crane outriggers on firm level ground. Stay clear of suspended loads. Do not stack cargo higher than the headboard. Lash and secure load properly. Learn more from the WSH Guidelines on Safe Loading on Vehicles at
Work At Heights Toolkit. for Supervisors
Work At Heights Toolkit for Supervisors For Supervisors How to use this toolkit? The toolkit aims to provide information for supervisor to communicate one topic a day to workers. Pictures are for illustration
FATAL AND SEVERE RISK PROGRAM
FATAL AND SEVERE RISK PROGRAM LEADER SESSION FALL FROM HEIGHTS Only do the task if it can be done safely FALL FROM HEIGHTS OUR COMMITMENT LIFE SAVING BEHAVIOUR: I WILL ALWAYS USE ADEQUATE PROTECTION WHERE
Chinthurst Preparatory School
Chinthurst Preparatory School Work At Height Policy Reviewed by TB/WB/SN/JV - September 2016 Next review date September 2017 Contents The Policy in 4 sections Work at Height Policy Appendix A Appendix
S31 Opening Statement Working at Height
S31 Opening Statement Working at Height Falls from height are by far the most common cause of workplace deaths and one of the main causes of major injury in the workplace. Latest figures reveal that 46
ACCREDITED SAFETY TRAINING FOR EQUIPMENT OPERATORS
JOB HAZARD ANALYSIS ELEVATING WORK PLATFORM Note: This is just a guideline. A Assessment must be designed for each specific EWP and each specific work area and task. A JHA is a never ending document. There
3124 It Only Takes a Second Discussion Version
3124 It Only Takes a Second Discussion Version Leader s Guide 2000, Aurora Pictures Inc. 1 Format of the Video This discussion version of It Only Takes A Second consists of a series of safety mishaps,
FALL PROTECTION / ELEVATED WORK
SEPTEMBER CORE REFRESHER HSE TOOL BOX FALL PROTECTION / ELEVATED WORK FALL PROTECTION Falls from elevations are one of the most common causes of death in this industry. OSHA requires fall protection when
Section 16B. Fall Protection. Falls are the second leading cause of death in the workplace. Factors contributing to falling incidents:
Section 16B. Fall Protection Falls are the second leading cause of death in the workplace. Factors contributing to falling incidents: 1. Personal factors Lack of concentration. Use of medication. Poor
Personal commitments you can live and work by:
Personal commitments you can live and work by: I anticipate possible dangers in any given operation and make every effort to analyze and avoid them before starting work, including immediately communicating
Dangerous Occurrence: Collapse of mobile crane
Accident Case Studies Dangerous Occurrence: Collapse of mobile crane Crane Operator had hoisted up a bag of sand (780 Kg) over the rooftop. While doing so, the Overload Radius Indicator (ORI) alarm sounded
Fall Protection PPT-SM-FALLPROT V.A.0.0
Fall Protection 1 Introduction to Fall Protection Falls account for 13% of fatal injuries 11% of these fatal falls were to a lower level Workers may be required to perform tasks at great heights which
techconnect CARPENTRY Objectives Unit 2 Workplace Safety TechConnect - STUDENT WORKBOOK 2-1 Workplace Safety - Unit 2
Unit 2 Workplace Safety techconnect One of the keys to working in any industry is the safety and health of the workers. The carpentry industry can be a dangerous industry in which to work if you do not
Progressive Safety Services LLC
1910.23 Guarding Floor and Wall Openings and Holes 1910.66 Powered Platforms, Manlifts and Vehicle Mounted Work Platforms. 1926.500 Fall Protection 1926.501 Duty to Have Fall Protection 1926.502 Fall Protection
Wales Farm Safety Partnership
Wales Farm Safety Partnership To find out more about on-farm health & safety, visit www.hse.gov.uk/agriculture WALES FARM SAFETY PARTNERSHIP Welsh Farm Safety Partnership - message from the chairman Safe
December 2012 Safety Meeting. Fall Protection Answer Key 1. B 2. B 3. D 4. B 5. D 6. C 7. A 8. C 9. D 10. A KEY-SM-FALLPROT V.A.0.
Fall Protection Answer Key December 2012 Safety Meeting Below is the answer key for the quiz. 1. B 2. B 3. D 4. B 5. D 6. C 7. A 8. C 9. D 10. A KEY-SM-FALLPROT Fall Protection 1 Introduction to Fall Protection
Working at Height. Policy and Procedures. Author: Beth Webster Assistant Safety Advisor. On behalf of School Safety Committee.
Working at Height Policy and Procedures Author: Beth Webster Assistant Safety Advisor Authorised by: Issued by: John Stephenson Safety Office On behalf of School Safety Committee Review Date: NO LATER
This subject outlines procedures to prevent accidents or injuries to you and others from inappropriate selection and use of fall protection equipment.
Page 1 of 7 REFERENCES Personal Protective Equipment Standards 1.31 PURPOSE This subject outlines procedures to prevent accidents or injuries to you and others from inappropriate selection and use of fall
How severely could the risk hurt someone?
Safe Work Method Statement No: WMS-08 Task: Install Drainage This WMS is submitted to: Project name and site address: Contact: Preparation of WMS by: Robert Raams Company: Enwon (Australia) Pty Ltd Authorised
Fall Protection Guidelines. Individual Unit Function: Safety Procedure No.: SOP-0111 Page: 1 of 13. Preparer: Owner: Approver: Safety Safety Safety
Procedure No.: SOP-0111 Page: 1 of 13 MIDGA Reviewed: 09/187/1 Effective: 09/17/17 Supersedes: Ver. 1.0 7 1. PURPOSE These guidelines are to provide minimum standards for work on corrugated roofing, structural
SOLAR CONSTRUCTION SAFETY REVIEW QUESTIONS
SOLAR CONSTRUCTION SAFETY REVIEW QUESTIONS Review Quiz: General jobsite safety The following questions and true or false statements help ensure that you understand the material presented in this module.
Lockout. HealthandSafetyOntario.ca. What is Lockout? How is a Lockout Done? Why is a Lockout Necessary?
What is Lockout? Lockout means to physically neutralize all energies in a piece of equipment before beginning any maintenance or repair work. Lockouts generally involve: Stopping all energy flows (for
7 Hazard assessment 8 Worker participation 9 Hazard elimination and control
This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. Businesses in this industry
Fall Protection. OSHA Office of Training & Education
Fall Protection 1 Falls in Construction Falls are the leading cause of deaths in the construction industry. Most fatalities occur when employees fall from opensided floors and through floor openings. Falls
Fall and Slip Prevention Test. 1. Fall protection is required in construction at and on scaffolds at.
Date... Name... WSU ID... Fall and Slip Prevention Test 1. Fall protection is required in construction at and on scaffolds at. a) 6 and 10 feet b) 1 and 2 feet c) Not required d) 4 feet for both 2. Falls
HEALTH & SAFETY ARRANGEMENTS FOR MANAGEMENT OF WORK AT HEIGHT
HEALTH & SAFETY ARRANGEMENTS FOR MANAGEMENT OF WORK AT HEIGHT INTRODUCTION Cwmni CYNNAL recognises that accidents can arise from working at height. Falls from height can be a cause of injury and absence
Safety in Precast Erection
Safety in Precast Erection C. Kirubakaran R Star Consultants Pte Ltd, Singapore Abstract: Construction industry is known to be one of the most hazardous among different industries all over the world. The
8. Fall Protection Procedures WAC
1.0 Fall Protection Introduction 8. Fall Protection Procedures WAC 296-155-245 If an employee is exposed to a fall hazard of ten (10) feet or more in height, the employee must use a fall restraint, fall
FALL PROTECTION GUIDELINE
FALL PROTECTION GUIDELINE July 2001 Table of Contents INTRODUCTION...3 CONTROL MEASURES...4 SURFACE PROTECTION...4 FIXED BARRIERS...5 EXAMPLES OF GUARDRAIL...6 WARNING BARRIERS...7 HANDRAILS...8 SURFACE
Safety Handbook. Quality, Environmental, Health & Safety Policy
CS Construction & Geotechnic Pte. Ltd., CS Bored Pile System Pte. Ltd., L&M Foundation Specialist Pte. Ltd., Double Wong Foundation Pte. Ltd., Soil Investigation Pte. Ltd., THL Foundation Equipment Pte.
How severely could the risk hurt someone? Low/Insignificant First aid
Safe Work Method Statement No: WMS-02 Task: Concreting, Formwork and Steel Fixing This WMS is submitted to: Project name and site address: Contact: Preparation of WMS by: Robert Raams Company: Enwon (Australia)
Risk Control at United Fire Group
In the United States, falls are the leading cause of fatalities on a construction site. Employers and employees need to do the following: Where protection is required, select fall protection systems appropriate
Walking-Working Surfaces
Walking-Working Surfaces 29 CFR 1910, Subpart D Presented by: Chesapeake Region Safety Council Rod Markley, CSP, CHST, CET Subpart D - Walking-Working Surface Topics we will cover: Background of rule Overview
first edition Safety Handbook
first edition Safety Handbook Thank you for your participation at Habitat for Humanity ReStore in Canada. Everyone s safety, health and working environment is a critical priority to Habitat for Humanity
Fall Protection and Elevated Work
Program No: SP-010 Page 1 1.0 PURPOSE AND INTRODUCTION Fall Protection and Elevated Work To establish fall protection safety procedures for Pitt County Schools employees engaged in any of the following
Reporting, Recording & more Walking Working Surfaces Local Emphasis Program Your Questions
Reporting, Recording & more Walking Working Surfaces Local Emphasis Program Your Questions As of January 1, 2015, employers must report the following to OSHA: All work-related fatalities within 8 hours
What Every Town Manager Needs to Know About Workplace Safety
What Every Town Manager Needs to Know About Workplace Safety Presented to: Massachusetts Municipal Association Annual Meeting & Trade Show January 23, 2016 Mary Dozois, CIH Department of Labor Standards
F A C I L I T A T O R S G U I D E
Aerial Lift Safety FA C I L I TAT O R S G U I D E What s Inside Facilitator s Guide a Overview b Getting Started d Presentation Guidelines f Lesson Plan h Frequently Asked Questions 1 Introduction 2 The
HS26 Working at Height Policy and Procedure
HS26 Working at Height Policy and Procedure HS26: Working at Height Policy and Procedure v2-0.jun 2016 Page 1 of 8 1. Scope This policy applies to all staff, students and visitors to The Shared Learning
To secure the health and safety of workers and workplaces; to ensure everyone goes home safely at the end of each day. To set minimum standards for the management of particular hazards where alternative
Pannier Corporation Health and Safety Handbook Marking System Group Aerial Lifts Original Date: Section: Revision date: Page: 12/5/ of 11
12/5/2013 37 1 of 11 1.0 Overview Aerial lifts are commonly used in construction, inspection, athletic events and repair services to lift Pannier employees to an elevated work position. Proper operation
WINDMILL (pre-start) HAZARD INSPECTION CHECKLIST
Windmill Hazard Inspection Checklist WINDMILL (pre-start) HAZARD INSPECTION CHECKLIST Authorised by: LOCATION OF INSPECTION...... Inspected By (1)........... (2)..... PRINT PRINT Signature (1):. (2)....
SWMS No 012 Samark North Qld Pty Ltd ABN : Electrical Contractors License C37121 Page 2 of 6
Samark North Qld Pty Ltd SWMS SWMS No 0 Samark North Qld Pty Ltd ABN : 99 08 98 87 Electrical Contractors License C37 Page of 6 Safe Work Method Statement Title: SWMS:0 INSTALLING LIGHT POLES Work Method
Grader Note: It is recommended that you read the Supporting Information page before you read this factsheet.
Grader Note: It is recommended that you read the Supporting Information page before you read this factsheet. Preparation for work (Preparation) Graders are part of a group of specialist machines that are
Job Hazard Analysis and Mitigation page 1 of 8. February 7, 2008 Rev. 6. Task or Employee: AEG Field Core Functions (Rev. 6) Routine Non-routine
Job Hazard Analysis and Mitigation page 1 of 8 Task or Employee: AEG Field Core Functions () Routine Non-routine Retention: Completed Routine JHAMs are retained by the employee and supervisor. Non-routine
OSHA s new walking working surfaces standards
OSHA s new walking working surfaces standards changes and new requirements Inspection of walking working surfaces 1910.22(d) Regularly and as needed and correct, repair, or guard against hazardous conditions;
Aerial Lift Safety Program
Aerial Lift Safety Program Revision Date: 6-19-2017 TABLE OF CONTENTS Aerial Lift Safety Program 1.0 Overview... 3 2.0 Policy......3 3.0 Requirements. 3 4.0 Purpose..... 4 5.0 Scope.........4 6.0 Responsibilities........7
New Employee Safety Orientation. Presented by: Risk Management Services 2419 Cockrell, Dallas TX (972)
New Employee Safety Orientation Presented by: Risk Management Services 2419 Cockrell, Dallas TX 75215 (972) 925-4050 Welcome to a Culture of Safety! We want to help you work safely so you go home to your
J&S Cooper Utilities
Working at Heights Inspection conducted for J&S Cooper Utilities Conducted on 17 Apr 2018 08:35 AM Location 11953 Tyler Rd, Red Bluff, CA 96080, USA Prepared by SafetyCulture Staff Completed on 17 Apr
Walking-Working Surfaces and Fall Protection Standards Update. OSHA General Industry
Walking-Working Surfaces and Fall Protection Standards Update OSHA General Industry Background Slips, trips, and falls account for a majority of all general industry injury incidents. Caused 849 workplace
MANDATORY DEADLINE December 27, 2018
EXHIBITOR HEALTH & SAFETY REQUIREMENTS AND COMPLIANCE DECLARATION MANDATORY DEADLINE December 27, 2018 This document is a declaration for the exhibitor, their appointed contractors, and their onsite staff
Mr. Teo Han Ping Head, Programme Management, Occupational Safety & Health Division, Ministry of Manpower
WSH Regulations and Case Studies WSH Forum for Pest Management 20 Feb 14 Mr. Teo Han Ping Head, Programme Management, Occupational Safety & Health Division, Ministry of Manpower A Great Workforce A Great
WORKING AT HEIGHT RESOURCE BOOKLET. Working at Height 1
WORKING AT HEIGHT RESOURCE BOOKLET Working at Height 1 Falls constantly top the HSENI Construction Group Statistics as the biggest cause of major injuries. The Construction Employers Federation Health
workplace fatalities involving falls to a lower level. Fall related fatalities make up 16% of workplace fatalities
2013 574 workplace fatalities involving falls to a lower level Fall related fatalities make up 16% of workplace fatalities Bureau of Labor Statistics Passive Fall Prevention Fall Arrest Fall Restraint
How severely could the risk hurt someone? Low/Insignificant First aid
Safe Work Method Statement No: WMS-0 Task: Line Marking This WMS is submitted to: Project name and site address: Contact: Preparation of WMS by: Robert Raams Company: Enwon (Australia) Pty Ltd Authorised
Risk Controls Proposed: (in hierarchy order from the most preferred control)
are to be assessed and controlled by eliminating or minimising any risks to health and safety. Eliminate - Where the risk to health and safety is removed from the workplace. Minimise - Where the risk cannot
Air Conditioner Installer Initial work capacity form
Purpose of this form Air Conditioner Installer This form is designed to be completed by injured workers and their supervisors and/or the return to work coordinator, if applicable; to determine the tasks
SASOL LIFE SAVING RULES (LSRs)
SASOL LIFE SAVING RULES (LSRs) Zero harm by following Life Saving Rules Adhere to fall protection requirements at all times when WORKING AT HEIGHTS Obey all traffic rules while driving and walking for
Why Update. OSHA updated Walking Working Standard. Who & What it Covers. Housekeeping (a) 6/25/ nd Leading cause of Workplace fatalities
OSHA updated Walking Working Standard Why Update 2nd Leading cause of Workplace fatalities $70 Billion Workers Comp Cost - US 100+ Million lost workdays/year - US Cari Gray, CSP Safety Consultant Ohio
Walking and Working Surfaces: Comprehensive Training
Walking and Working Surfaces: Comprehensive Training PROGRAM SYNOPSIS: To ensure workers are provided with safe working and traveling surfaces, OSHA has developed and recently updated its regulation 29
Specialists Window Cleaning Induction
Specialists Window Cleaning Induction Mobile Tower Scaffolds Mobile tower scaffolds are used on flat firm, stable ground to access higher levels. They have toe boards, mid rails & guard rails to prevent
The purpose of this training is to give field technicians awareness training and guidelines on potential hazards they may encounter in the field.
Purpose The purpose of this training is to give field technicians awareness training and guidelines on potential hazards they may encounter in the field. Fall Protection and Prevention JELD-WEN Field Employees
Work Activity (e.g. Road Work): Work Location:.
Working with Cranes Work Activity (e.g. Road Work): Work Location:. GENERAL INFORMATION Hinchinbrook Shire Council Lannercost Street Ingham Qld, 4850 ABN 46 291 971 168 Ph: 47764610 All personnel conducting
CONSTRUCTION SAFETY PROGRAM FOR. Golder Acoustics Inc.
CONSTRUCTION SAFETY PROGRAM FOR Golder Acoustics Inc. TABLE OF CONTENTS Topic... Page Safety and Health Policy... 2 Safety and Health Objectives... 3 Job Site Inspections... 4 Contractor Safety Administrator...
Workplace Safety and Health Guidelines
Published in August 2008 by the Workplace Safety and Health Council in collaboration with the Ministry of Manpower. All rights reserved. This publication may not be reproduced or transmitted in any form
Safe Use of Access Equipment
Safe Use of Access Equipment Guidance Note 2 Nov 17 1 Safe Use of Access Equipment Introduction This Guidance Note gives practical information about using access equipment. Sample templates have been included
Fall Protection Or Not??? You Decide
Fall Protection Fall Protection Or Not??? You Decide Fall Protection Or Not??? You Decide Fall Protection Or Not??? You Decide Oh Oh I forgot to tie in. Fall Protection Or Not??? You Decide Fall Protection
Scissor Lifts Course Outline
Scissor Lifts Course Outline The following outline summarizes the major points of information presented in the program. The outline can be used to review the program before conducting a classroom session,
Aerial Lift Safety Program
Aerial Lift Safety Program 0 Program Contents Introduction 2 Regulatory Basis..2 Operational Safety Precautions.3 Hazard Avoidance 3 1. Electrocution.3 2. Tip Over and Collapse.4 3. Falls.5 4. Collision
FALL PROTECTION PLAN July 2012
FALL PROTECTION PLAN July 2012 Office of Police and Safety (423)323.0255 Introduction In the construction industry in the United States, falls are the leading cause of worker fatalities. Each year, on
1. Objective of the initiative To ensure that all employees and subcontractors are aware of the risks associated with working at height.
Safety Initiative 02 Working at Height May 2011 CONTENTS 1. Objective of the initiative 2. Overview. 3. Implementation 4. Duties 5. Hierarchy of Controls 6. Workplace Inspections 7. Fragile Surfaces 8.
Quiz. telescoping. designed to. established. 1 Pag. EWP Pre Reading
EWP Pre Reading and Quiz Due to the intensivee nature of our EWP course, it is mandatory that you study this manual thoroughly before attending your course. Doing so will ensure you have the best possible
Waste Industry Safety & Health
Waste Industry Safety & Health A practical pocket guide for the Waste industry Supported by: Delivering the Solution Together Introduction The Waste Industry Safety and Health (WISH) forum is supporting
FCX Department of Occupational Health and Safety. Flagging and Barricading Guideline
FCX Department of Occupational Health and Safety Flagging and Barricading Guideline Approval Date: 11/12/13 Original Date: 03/30/09 SOP # FCX-19 Revision # 1 Supersedes X High Medium Task Risk Low NA Contents
Fall Hazards: One of OSHA s Big Three. By Mark A. Lies II and Elizabeth Leifel Ash I. INTRODUCTION
OPTIMUM Articles Provided by www.optimumresultsusa.com Fall Hazards: One of OSHA s Big Three By Mark A. Lies II and Elizabeth Leifel Ash I. INTRODUCTION In 2010, the Bureau of Labor Statistics (BLS) reported
Powered Platform Safety
Powered Platform Safety Session Objectives You will be able to: Identify powered platform components Recognize platform safety features Understand inspection requirements Use personal fall arrest systems
New Mexico Institute of Mining & Technology. Fall Protection Program
New Mexico Institute of Mining & Technology Fall Protection Program REGULATORY STANDARDS: OSHA - 29 CFR 1910.66 29 CFR 1910.128, 129, 130, 131, (Proposed) 29 CFR 1926.104 29 CFR 1926.500 BASIS: Approximately
BASIC SAFETY PRACTICES FOR LIFTS
BASIC SAFETY PRACTICES FOR LIFTS INTRODUCTION Installing, maintaining, repairing, and modernizing lifts are activities leading to exposure to specific risks. In order to mitigate these risks and help
Overview. Identify fall hazardous areas Describing potential fall hazards How appropriate portable and extension ladders are used
FALL PROTECTION Overview Identify fall hazardous areas Describing potential fall hazards How appropriate portable and extension ladders are used Fall Protection All situations that expose personnel to
Safety Risk Assessment Roofing Works / Surveying / Inspections
One Direct aintenance td Persons at (Groups) Assessor Appointment Tel. No. Description of Task or Activity A One Direct employees ark Bloxidge H&S anager 0208 821 5197 One Direct Operatives accessing roof
Ladder and Scaffold Safety. Utilizing published Safety Minutes
Ladder and Scaffold Safety Utilizing published Safety Minutes SAFETY MINUTE Safety Minutes Safety Minutes are brief safety snap-shots covering a wide variety of safety subjects Utilize these to open a
Worker s Safety Handbook for Rigger and Signalman
Worker s Safety Handbook for Rigger and Signalman Contents Preface 3 Proper Attire for Rigger and Signalman 4 Roles and Responsibilities of a Rigger 5 Good and Bad Rigging Practices 12 Inspection of Hooks
Arab Fertilizers Association Knowledge Sharing Template
In ammonia plant for abuqir 2 plant, during rising one of the workers to the top of absorption tower to check the trays of the absorption tower by crane suspended man basket. The crane shacked causing
MSA Fall Protection Kits
MSA Fall Protection Kits Scaffolding application Falls from height continue to be the largest single cause of fatal and life changing injuries for workers across industry. Scaffolders, when erecting, altering
B S Glass Ltd Safety procedures- outsourced Workplaces
B S Glass Ltd Jan 17 B S Glass Ltd Safety procedures- outsourced Workplaces Index - - - - - - - - Page No On Site safety - - - - - - - - - - - - - - - - - - - Content 3. 1.00 Health and Safety Mission
MAINTAINING YOUR SAFETY
2664 MAINTAINING YOUR SAFETY Leader s Guide ERI Safety Videos MAINTAINING YOUR SAFETY This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation. Featured are: INTRODUCTION:
Operation of Embrey Excavator Shears Safe Work Procedure PTES_HSE_SWP_039. Name Date Signature. Author Jarred Hearle 27/11/2015
Operation of Embrey Excavator Shears Safe Work Procedure PTES_HSE_SWP_039 Name Date Signature Author Jarred Hearle 27/11/2015 Reviewed FMG Site Team 27/11/2015 ---------- Approved Geoff Selfe 27/11/2015
WORK METHOD STATEMENT ALUMINIUM WINDOWS AND DOORS
ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone
NAVSEA STANDARD ITEM
NAVSEA STANDARD ITEM ITEM NO: 009-40 DATE: 18 JUL 2014 CATEGORY: I 1. SCOPE: 1.1 Title: Requirements for Contractor Cranes, Multi-Purpose Machines and Material Handling Equipment at Naval Facilities; accomplish
Key provisions of OSHA's new rule on walking/working surfaces, fall protection
ARTICLES CASES Key provisions of OSHA's new rule on walking/working surfaces, fall protection Although an overwhelming majority of general industry accidents stem from slips, trips and falls, Subpart D
Receipt By Jurong Port Representative -To be filled by Jurong Port Representative No Item Yes No Remark 1.
Part 1-General Information -To be filled up by the Applicant (Company Representative) Description of work / Type of Cargo Operation Location Max. Dimension of Cargo Heaviest Cargo Wt. Start Date / Time
TRADE AREA: ELECTRICAL INDUSTRY
TRADE AREA: ELECTRICAL INDUSTRY Some possible workplace hazards and possible ways for Host employers and Apprentices/Trainees in controlling these hazards. What are possible hazards? What could be possible
TLILIC2005A Licence to operate a boomtype elevating work platform (boom length 11 meters or more)
TLILIC2005A Licence to operate a boomtype elevating work platform (boom length 11 meters or more) Release: 1 TLILIC2005A Licence to operate a boom-type elevating work platform (boom length 11 meters or
SWMS documented by: Feb Bo Ceprnja Date Feb Feb Feb 2018
Contractor Company Details: BUILDSAFE SAFE WORK METHOD STATEMENT 0002 (Void Platform Stairs) Part 1 (To be used in conjunction with SWMS 0001 General Site Activities & SWMS 0002 Void Platform) Additional
Working at Heights Training Checklist (Ontario Version)
Working at Heights Training Checklist (Ontario Version) The new working at heights training is different from the fall protection training required by Sec. 26.2(1) of the Ontario Construction Projects
Competent Person - Fall Protection Presented by Turner Safety- your instructor is Steve Turner
Competent Person - Fall Protection Presented by Turner Safety- your instructor is Steve Turner 1 Falls in Construction Falls are the leading cause of deaths in the construction industry. Most fatalities
What we are already doing Working at Height comes within the framework of St. Matthew s Health and Safety and Fire arrangements policy
Risk Assessment For: Assessment signed off by (Warden): Assessment signed off by (Clergy): Working at Height Please also see separate risk assessment for Use of Stepladders Assessment carried out by (H&S):
SUBCONTRACTOR SAFETY ORIENTATION PACKET
SUBCONTRACTOR SAFETY ORIENTATION PACKET Safety Orientation Policy and Training Safety Policy Statement and Responsibilities 10/13/2011 Page 1 of 18 7617 Freedom Way Fort Wayne, Indiana 46818 www.wagner-meinert.com
SAFE WORK PROCEDURE. Location of Equipment Written By: Approved By: Date Created Last Revision
Page 1 of 5 Location of Equipment Written By: Approved By: Date Created Last Revision School: Facilities & Operations Brent Vandenbosch Gordon Howe October 14, 2009 new Room: n/a Barry Hamilton HAZARDS
Self Inspection Checklist
Self Inspection Checklist Name: Date: Job Name: Title: Time: Job Number: Instructions: Review each lettered subpart under each section that you are responsible for completing. If you have inspected all
Work at height Policy
Work at Policy Introduction This policy procedure outlines the Forces responsibility to provide guidance to all police officers and staff when working at. Many serious incidents involving working at occur