Products no longer available
|
|
- Norma James
- 5 years ago
- Views:
Transcription
1 Technical ata sheet R7..R haracterize control valves, 3-way, with flange PN 6 for open an close col an warm water systems for moulating control on the water sie of air-hanling an heating systems air bubble-tight (control path ) Type overview Technical ata Type k vs [m 3 /h] [Inches] p s [kpa] n(gl) 1) R709R ³/₈ >50 R711R ¹/₂ >50 R713R 4 15 ¹/₂ >100 R718R ³/₄ >100 R723R >100 R731R ¹/₄ >100 R738R ¹/₂ >100 R748R >100 1) optimize in the opening range S v Functional ata Flow meia ol an hot water, water with max. 50% volume of glycol Temperature of meium ) (lower or higher temperatures on request) Rate pressure p s see «Type overview» Flow characteristic ontrol path : equal percentage (to VI/VE 2173) n(gl): see «Type overview» ypass : linear, flow rate is 70% of k vs value Rangeability S v See «Type overview» eakage rate ontrol path : ir bubble-tight (O 1, IN3230 T3) ypass : pprox % of k vs value (in relation to the highest value within the (e.g. R713) Pipe connector Flange PN 6 to EN 1092/1 ifferential pressure Δp max losing pressure Δp s 100 kpa 600 kpa ngle of rotation 90 (Operating range control path , bypass ) Installation position Upright to horizontal (in relation to the stem) aintenance aintenance-free aterials Fitting Forge, nickel-plate brass boy Valve cone an stem hrome-plate brass Stem seal O-Ring, EP all seat PTFE, O-Ring Viton haracterizing isk TEFZE Flange ring 15 / 20: Zinc-plate steel : luminum Flange joint surface Nickel-plate brass imensions / Weights see «imensions an weights», page 3 otorizing see the complete overview of water solutions 1) The allowe meia temperature can be limite, epening on the type of actuator. The correct values can be foun in the corresponing actuator ata sheets.. T5-R7..R ontrol en v Subject to changes 1 / 3
2 R7..R haracterize control valves, 3-way, with flange PN 6 Safety notes Prouct features Installation notes! oe of operation Flow characteristic Recommene mounting positions The valve has been esigne for use in stationary heating, ventilation an air conitioning systems an is not allowe to be use outsie the specifie fiel of application, especially in aircraft or in any other airborne means of transport. It may only be installe by suitably traine personnel. ll applicable legal or institutional installation regulations must be complie with. The valve oes not contain any parts that can be replace or repaire by the user. The valve is not allowe to be ispose of as househol refuse. ll locally vali regulations an requirements must be observe. The recognize rules shoul be applie when etermining the flow characteristic of final controlling elements. The characterize control valve is operate by a rotary actuator. The actuator is controlle by a stanar moulating or 3-point control system an move the ball of the valve the throttling evice to the opening position ictate by the control signal. Open the ball valve counterclockwise an close it clockwise. Equal-percentage characteristic of the flow rate ensure by the integral characterizing isc. The valve may be mounte either vertically or horizontally. It is not permissible, mounting the valve with the stem pointing ownwars Water quality requirements aintenance irection of flow The water quality requirements specifie in VI 2035 must be ahere to. haracterize control valves are relatively sensitive control evices. In orer to ensure a long service life, it is avisable to fit strainers. The characterize control valves an rotary actuators are maintenance-free. efore any kin of service work is carrie out on actuator sets of this type, it is essential to isolate the rotary actuator from the power supply (by unplugging the power lea). ny pumps in the part of the piping system concerne must also be switche off an the appropriate isolating fittings close (allow everything to cool own first if necessary an reuce the pressure in the system to atmospheric). The system must not be returne to service until the ball valve an the rotary actuator have been properly reassemble in accorance with the instructions an the pipework has been refille in the proper manner. The irection of flow, specifie by an arrow on the housing, is to be complie with, since otherwise the ball valve can be amage. Please ensure that the ball is in the correct position. = 100% = 0% = 0% = 100% ccessories echanical accessories escription Stem heating ZR / 3 T5-R7..R ontrol en v Subject to changes
3 R7..R haracterize control valves, 3-way, with flange PN 6 imensions an weights imensional rawings min. Y min. X H 2) H 42 X 1) Y 1) Weight [kg] x x x 11, x x x ) inimum istance with respect to the valve centre. 2) The actuator imensions can be foun on the respective actuator ata sheet. Further ocumentations omplete overview «The complete range of water solutions» ata sheets for actuators Installation instructions for ball valves an/or actuators Notes for project planning (hyraulic characteristic curves an circuits, installation regulations, commissioning, maintenance etc.) T5-R7..R ontrol en v Subject to changes 3 / 3
4 R7..R R6..R min. X H TR.. R.. NR.. F.. FR.. RF.. min. Y mm mm TR.. R.. NR.. F.. FR.. / RF.. H X Y X Y X Y X Y X Y R609R...R615R R709R...R715R 15 ¹/₂ x R618R...R620R R718R...R720R 20 ³/₄ x R623R...R625R R723R...R725R x R631R...R632R R731R...R732R 32 1¹/₄ x R639R...R640R R738R...R740R 40 1¹/₂ x R649R...R650R R748R...R750R x R664R...R665R 65 2¹/₂ x R679R...R680R x
5 k v k v Y 100% 0% R713R R731R R725R R750R 100% 0% 0% 100% t p max ( 10 ) (+120 ) 100 kpa p s 600 kpa (PN 6) R609R R618R R639R R615R R632R R610R R623R R649R R620R R640R R611R R631R R664R R625R R650R R612R R679R R665R R613R R680R R709R R718R R738R R715R R732R R711R R723R R748R R720R R740R Y 100% 0% 100% 0% 0% 100% 100% 0% 0% 100%
Products no longer available
Technical ata sheet R7..R Open-close ball valves, 3-way, with flange PN 6 for open an close col an warm water systems for switching functions on the water sie an 2-point controls in air-hanling an heating
More informationType overview. Technical data. Safety notes
Technical ata sheet hange-over ball valve, 3-way, Flange, PN 6 For close col an warm water systems For switching functions on the water sie an 2-point controls in air hanling units an heating systems ir
More informationProducts no longer available
Technical data sheet R2.. Characterized control valves, 2-way, with internal thread for open and closed cold and warm water systems for modulating control on the water side of air-handling and heating
More informationTechnical data sheet. Type overview. Technical data. Safety notes. T5-R2.. Open-close en v Subject to changes 1 / 3
Technical data sheet R2.. Open-close ball valves, 2-way, with internal thread for open and closed cold and warm water systems for shut-off functions on the water side and 2-point controls in air-handling
More informationProducts no longer available
Technical data sheet R3 / R3G Change-over ball valve, 3-way, with internal thread for closed cold and warm water systems for switching functions on the water side and 2-point controls in air-handling and
More informationFor latest prices and delivery to your door visit MyTub Ltd
Technical ata sheet A6H / A6S Shut-off valves with clips, PN 6 / PN / PN 6, with manual overrie in open an close col an warm water systems for switching heating an cooling machines on an off Overview of
More informationOverview of types. Technical data
Technical data sheet R2..xx-S.. Characterised control valves, 2-way, with internal thread For open and closed cold and warm water systems For modulating water-side control of U and heating systems ir bubble
More informationOverview of types. Technical data. Safety notes
Technical data sheet R2..-S.. Open-close ball valves, 2-way, with internal thread For open and closed cold and warm water systems For shut-off functions on the water side and 2-point controls in U and
More informationOverview of types. T5-R B2/R B2 en v Subject to changes 1 / 4. k vs (Sequence 2)
Technical data sheet R3015-..-..-B2 / R3020-..-..-B2 Characterised control valves, 6-way, with internal threads Two sequences (cooling/heating) With a rotary actuator 90 Water-side switching or modulating
More informationType overview. R B2 en-gb subject to changes 1
Technical data sheet R30..-..-..-B2 Characterised control valve, 6-way, Internal thread Two sequences (cooling/heating) with one 90 rotary actuator Switching or modulating control on the water side of
More informationRp [ ] Sv min. [ ] C215QP-B 15 1/ C215QP-D 15 1/ C220QP-F 20 3/ [ ]
Technical data sheet C2..QP-.. For closed cold and warm water systems For modulating control of airhandling and heating systems on the water side Snap-assembly of the actuator overview DN [ ] Vnom [ l/h]
More informationThe valves are used in combination with AMV(E) 130/140, AMV(E) 130H/140H and AMV(E) 13 SU actuators. DN k VS
Description VZ 2 VZ 3 VZ 4 VZ valves provie a high quality, cost effective solution for the control of hot an/or chille water for fan coil units, small reheaters, an recoolers in temperature control systems.
More informationThe valves are used in combination with AMV(E) 130/140, AMV(E) 130H/140H and AMV(E) 13 SU actuators. DN k VS
Description VZ 2 VZ 3 VZ 4 VZ valves provie a high quality, cost effective solution for the control of hot an/or chille water for fan coil units, small reheaters, an recoolers in temperature control systems.
More information2-port and 3-port valves PN 16
OEM 2-port valves VVP459.10-0.63 to VVP459.25-6.3 3-port valves VXP459.10-0.63 to VXP459.25-6.3 3-port valves with bypass VMP459.10-0.63 to VMP459.20-4 2-port valves VVP459.25-6.3 to VVP459.40-25 3-port
More information2-port and 3-port seat valves, PN16
s 4 47 VVI47 VXI47 CVTIX 2-port and 3-port seat valves, PN6 with internally threaded connections VVI47.. VXI47.. ronze valve body CC49K (Rg5) DN 5...5 k vs 2.5...4 m 3 /h Internally threaded connections
More information2-port seat valves PN25 with externally threaded connections
4 379 2-port seat valves PN25 with externally threaded connections VVG55.. Valve body bronze CC491K (Rg5) DN 15...25 (½...1 ") kvs 0.25...6.3 m3/h Stroke 5.5 mm Sets of ALG.. with threaded and ALS.. with
More informationTwo-port valves, male threaded, PN25
4 379 Two-port valves, male threaded, PN25 VVG55... Two-port valves, externally threaded, PN25 Bronze Rg5 DN15... 25 mm (½"... 1") k vs 0.25... 6.3 m 3 /h Stroke 5.5 mm Suitable for type SQS35... or SQS65...
More informationSTAD BALANCING VALVES
BAANCING BAANCING VAVES BAANCING VAVE The STAD balancing valve elivers accurate hyronic perfomance in an impressive range of applications. Ieally suite for use on the seconary sie in heating an cooling
More information6-way characterised control valves DN15 and DN 20
6-way characterised control valves DN15 and DN 20 Table of contents Introduction 2 Project planning 2 Structure of the 6-way characterised control valves 2 Range of use 2 Characteristic curve 3 Flow direction
More informationSeated valve for steam (PN 25)
Data sheet Seated valve for steam (PN 25) VFS 2 Two way valve, flange Description VFS 2 valve is a range of 2 port flanged valve for chilled water, PHW, MPHW, HPHW (low, medium or high pressure hot water)
More information2-Port and 3-Port Seat Valves with Female Thread, PN16
4 362 VVI4 VXI4 2-Port and 3-Port Seat Valves with Female Thread, PN6 VVI4... VXI4... ronze valve body CC49K (Rg5) DN5... DN50 k vs 2.5... 40 m 3 /h Female threaded connections Rp as to ISO 7/ Can be equipped
More informationPressure Independent Control Series
Document No. 155-522 Pressure Independent Control Series Two-Way Cast Iron Flanged Bodies, ANSI 125 and 250 Description Siemens Pressure Independent Control Valves integrate three functions into a single
More informationDimensioning open-close, control and pressure-independent valves. Table of contents. General notes for project planning
General notes for project planning Dimensioning open-close, control and pressure-independent valves Table of contents Introduction 2 Design and dimensioning General 3 Dimensioning steps Open-close valves
More informationB2KL: 6-way ball valve with male thread, PN 16
Product data sheet 3.1 58.001 K: 6-way ball valve with male thread, PN 16 How energy efficiency is improved fficiency means precise control and low actuating forces eatures 6-way ball valve for changeover
More information6-way characterised control valves DN15 / DN 20 / DN 25
6-way characterised control valves DN15 / DN 20 / DN 25 Table of contents Introduction 2 Project planning 2 Structure of the 6-way characterised control valves 2 Range of use 2 Characteristic curve 3 Flow
More information2-Port Seat Valves with Flange, PN 16
4 45 2-Port Seat Valves with Flange, PN 6 VVF45... dular cast iron EN-GJS-400-5 valve body DN 50...50 k vs 9...00 m /h Can be equipped with SKB...- or SKC...- electrohydraulic actuators Use For use in
More informationSeated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange
Data sheet Seated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange Description VF 2 VF 3 VF 2 and VF 3 valves provide a quality, cost effective solution for most water and chilled applications.
More information3-port seat valves with externally threaded connection, PN 16
4 463 Acvatix 3-port seat valves with externally threaded connection, PN 16 VXG41.. ronze CuSn5Zn5Pb2 valve body DN 15 50 k vs 1.6 40 m 3 /h Flat sealing connections with external thread G to ISO 228-1
More informationSeated valves (PN 6) VL 2 2-way valve, flange VL 3 3-way valve, flange
Data sheet Seated valves (PN 6) VL 2 2-way valve, flange VL 3 3-way valve, flange Description VL 2 VL 3 VL 2 and VL 3 valves provide a quality, cost effective solution for most water and chilled applications.
More informationBTV. Internally threaded 2-way control valve. Flow characteristics. Function
Internally threaded 2-way control valve The valves are designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. They are pressure balanced (from DN20-50, not DN15) and
More information2-Port Seat Valves with Flange, PN 16
4 40 2-Port Seat Valves with Flange, PN 6 VVF4... Grey cast iron EN-GJL-250 valve body DN 50...50 k vs 9...00 m /h Can be equipped with SQX- electromotoric or SKD...-, SKB...- or SKC...- electrohydraulic
More informationThree-port valves. Special versions with special stem sealing gland for: High temperature hot water C Thermo oils
4 440 Three-port valves with flange, PN6 VXF4... Three-port valves with flange, PN6 Can be used as mixing or diverting valves Grey cast iron GG-25 DN5...50 mm k vs.9...300 m 3 /h Stroke 20 or 40 mm Can
More informationCA14 SG Iron Air and Gas Trap ½" and ¾" (Screwed)
ert. No. LRQ 9638 ISO 91 14 SG Iron ir and Gas Trap ½" and ¾" (Screwed) TI-P148-1 ST Issue 6 escription The 14 is a range of float type automatic liquid drainers for air and gas systems. The body and cover
More informationTwo-port seat valves
4 345 Two-port seat valves with flange, PN16 VVF45... Two-port seat valves with flange, PN16 Spheroidal cast iron GGG-40 DN50...150 mm k vs 19...300 m 3 /h Stroke 20 or 40 mm Can be equipped with actuators
More informationSeated valve for steam (PN 25) VFS 2 2-way valve, flange
Data sheet Seated valve for steam (PN 25) VFS 2 2-way valve, flange Description VFS 2 valve is a range of 2 port flanged valve for chilled water, PHW, MPHW, HPHW (low, medium or high pressure hot water)
More informationDS MB, MBF THREE PORT VALVES
DS 4.501 04/96, F THREE PORT VALVES Specification No. 617-X-XXX* F 618-X-XXX* and F valves are of the 3-port rotary-shoe type. They are characterised for use as mixing or diverting valves, with hot or
More informationVZL valve - 2/3/4-way
VZ valve - 2/3/4-way Description Stem extension plug VZ 2 VZ 3 VZ 4 VZ valves provide a high quality, cost effective solution for the control of hot and/or chilled water for fan coil units, small reheaters,
More informationM45 ISO Ball Valve DN25 to 150 Installation and Maintenance Instructions
BAC 13310 IM-P133-42 ST Issue 2 M45 ISO Ball Valve DN25 to 150 Installation and Maintenance Instructions 1. General safety information 2. General product information 3. Installation 4. Commissioning 5.
More informationDifferential Pressure Regulator Type Type 45-6 (0.1 to 1 bar, DN 15) Mounting and Operating Instructions EB 3226 EN
Differential Pressure Regulator Type 45-6 Type 45-6 (0.1 to 1 bar, DN 15) Mounting and Operating Instructions EB 3226 EN Edition March 2008 Contents Contents Page 1 Design and principle of operation...................
More informationSeries 42 Self-operated Regulators Differential Pressure Regulators with Type 2424/Type 2428 Actuator (closing) Type Type 42-28
Series 42 Self-operated Regulators Differential Pressure Regulators with Type 2424/Type 2428 Actuator (closing) and balanced Type 2422 Valve Type 42-24 Type 42-28 Application Differential pressure regulators
More informationAVP-F. p setting range (bar) Code No. 003H6200
Data sheet Differential pressure controller (PN 16) AVP - return and flow mounting, adjustable setting AVP-F - return mounting, fixed setting Description The controller has a control valve, an actuator
More informationPressure balanced valves (PN 25) VM 2 2-way valve, external thread VB 2 2-way valve, flange
Data sheet Pressure balanced valves (PN 25) 2-way valve, external thread VB 2 2-way valve, flange Description VB 2 and VB 2 are two-way valves designed to work with Danfoss electric actuators AMV(E) 0,
More informationRB 4700 Commercial & Industrial Regulator
RB 4700 Commercial & Inustrial Regulator The RB 4700 regulator is esigne for use in inustrial an istribution applications such as istrict station an heating plants, an for inustrial customers. DESCRIPTION
More informationDifferential pressure and flow controller (PN 16) AVPQ - return mounting, adjustable setting
Data sheet Differential pressure and flow controller (PN 16) AVPQ - return mounting, adjustable setting Description AVPQ is a self-acting differential pressure and flow controller primarily for use in
More informationDifferential pressure controller (PN 16) AHP - return mounting, adjustable setting
Data sheet Differential pressure controller (PN 16) AHP - return mounting, adjustable setting Description DN 15-40 DN 50 DN 65-100 AHP is a self-acting differential pressure controller primarily for use
More informationAS13 1F-M3 AS13 1F-M5 AS23 1F-01 AS23 1F-02
Spee Controller with One-touch Fittings Series Elbow Style, Universal Style Minimizes installation time an cost Reuces the mounting height an enables compact machinery esign. Effective area is larger than
More informationMZX. Three-Port Seat Valves SPECIFICIATIONS AND GUIDE TO SELECTION
01 These seat valves are of globe construction with a linear moving spindle and a modified parabolic characterised plug operating against the upper seat which controls flow quantity to suit the load. The
More informationCA44 and CA44S Carbon Steel Air and Gas Traps Flanged DN15 to DN25
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationFunction. Code Automatic filling units with pressure gauge connection Size 1/2 Code Automatic filling units with pressure gauge Size 1/2
utomatic filling units series 55 cert. n ISO 9 5/5 G Replaces 5/ G unction he automatic filling unit is a device consisting of a pressure reducing valve with compensating seat, an inlet strainer, a shut-off
More informationCA46S Austenitic Stainless Steel Air and Gas Trap DN40 and DN50
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationPressure balanced valves (PN 25)
Data sheet Pressure balanced valves (PN 25) 2-way valve, external thread VB 2 2-way valve, flange Description VB 2 and VB 2 are two-way valves designed to work with Danfoss electric actuators AMV(E) 10,
More informationVG3000. Globe Valves Series for Terminal Units. Product Bulletin. 2-way PDTC (NO) with 6 bar close off pressure. Extend range of K VS
VG3000 Globe Valves Series for Terminal Units Product ulletin The VG3000 brass valve series is primarily designed to regulate the flow of water in response to the demand of a controller in zone and terminal
More informationVG3000. Globe Valves Series for Terminal Units. Product Bulletin. 2-way PDTC (NO) with 6 bar close off pressure. Extend range of K VS
VG3000 Globe Valves Series for Terminal Units Product ulletin The VG3000 brass valve series is primarily designed to regulate the flow of water in response to the demand of a controller in zone and terminal
More informationMounting and Operating Instructions EB 3007 EN. Self-operated Pressure Regulators. Differential Pressure Regulators (opening) Type Type 42-25
Self-operated Pressure Regulators Differential Pressure Regulators (opening) Type 42-20 Type 42-25 Type 42-20 Differential Pressure Regulator Type 42-25 Differential Pressure Regulator Mounting and Operating
More informationHERZ - Compact Flow Controller with
HERZ - Compact Flow Controller with Integrated Control Valve Data sheet for flanged compact PIBCV PN 16, Issue 0616 Dimensions in mm min. 200 mm control valve cone valve seat H flow controller cone actuator
More informationPCTV/PCMTV/PCTVS15-25
PTV/PMTV/PTVS N 15-25 revision 02 2017 PTV/PMTV/PTVS15-25 Pressure independent control valves, N15-N25 with integrated flow limiter for thermal emitters and differential pressure regulator PTV/PMTV/PTVS
More informationDS MZ, MZF, MJF THREE-PORT SEAT VALVES
DS 4.610 11/99, F, THREE-PORT SEAT VALVES Specification No. 626-3-XXX These seat valves are of 'globe' construction with a linear moving spindle and a modified parabolic characterised plug operating against
More informationHERZ - Compact Flow Controller with
HERZ - Compact Flow Controller with Integrated Control Valve Data sheet for flanged compact PIBCV PN 16, Issue 1016 Dimensions in mm min. 200 mm control valve cone valve seat H flow controller cone actuator
More information3-way control valves VK 3
Data sheet 3-way control valves VK 3 Description / Application VK 3 valves are a range of 3 port high specification flanged valves for chilled water, LPHW, MPHW, HPHW (low, medium or high pressure hot
More informationSeated valves VRB 3, VRG 3
Data sheet Seated valves VRB 3, VRG 3 Description VRB, VRG valves provide a quality, cost effective solution for most water and chilled applications. These valves may be used with glycol concentrations
More informationKTM 50 (DN ) Installation, maintenance and operating instructions
52 762-306 09.2014 KTM 50 (DN 100-200) Installation, maintenance and operating instructions General High-performing and compact, these pressure-independent control valves for variable flow heating and
More informationVFPIP/VFPIM/VFPI 15-25
VFPIP/VFPIM/VFPI N 15-25 revision 12 2016 VFPIP/VFPIM/VFPI 15-25 Pressure independent control valves, N15-N25 with integrated flow limiter for thermal emitters and differential pressure regulator VFPIP/VFPIM/VFPI
More informationSCA Series Inverted Bucket Steam Traps
0770050/5 IM-P077-06 ST Issue 5 SCA Series Inverted Bucket Steam Traps Installation and Maintenance Instructions 1. General safety information 2. General product information 3. Installation 4. Commissioning
More informationDifferential pressure controller (PN 25) AVP - return and flow mounting, adjustable setting
Differential pressure controller (PN 25) AVP - return and flow mounting, adjustable setting Description AVP(-F) is a self-acting differential pressure controller primarily for use in district heating systems.
More informationPressure and Flow Control Valves DBGM, German and European Patents
Pressure and Flow Control Valves DBGM, German and European Patents Absolutely Reliable Pressure and Flow Control In water mains of sizes DN 50 to DN 150, ERHARD Control Valves in straight or angle pattern
More informationPCMTV Pressure independent control valves, DN20-DN32 with integrated flow limiter for thermal emitters and differential pressure regulator
revision 02 2017 PMTV20-32 Pressure independent control valves, N20-N32 with integrated flow limiter for thermal emitters and differential pressure regulator PMTV valves are intended for use in fan-coil
More informationRotary valves HRB 3, HRB 4
Data sheet Rotary valves HRB 3, HRB 4 Description HRB rotary valves can be used in combination with electric actuators AMB 162 and AMB 182. Features: Lowest leakage in class Unique position indicator (visible
More informationVBGx-xx-xx Externally Threaded Control Ball Valves PN25 (DN15 TO DN32)
VGx-xx-xx Externally Threaded Control all Valves PN25 (DN15 TO DN32) PPLICTION The VG2 2-Way and VG3 3-Way Control all Valves control hot and chilled water with glycol solutions up to 50% according to
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 400 Flanges GN10/16-10 C + 120 C Max Pressure : 16 Bars up to DN 200 ( 10 bars over ) Specifications : Removable stainless steel filter Bolted
More informationSTAD-C. Balancing valve ENGINEERING ADVANTAGE
STA-C Balancing valve Pressurisation & Water Quality Balancing & Control Thermostatic Control ENGINEERING AVANTAGE The STA-C balancing valve has been specially developed for use in indirect cooling systems
More informationDN 1/2" to 2" Female BSP + 0 C C Max Pressure : 16 Bars Specifications : Stainless steel removable filter Female / Female With draining valve
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 2" Female BSP + 0 C + 120 C Max Pressure : 16 Bars Specifications : Stainless steel removable filter Female / Female With draining valve Materials
More informationRadiator valves VDN1.. VEN1..
2 105 EN 215 Straight valves VDN1.. Angle valves VEN1.. ACVATIX TM Radiator valves VDN1.. VEN1.. DIN-norm, for 2-pipe heating systems Valve bodies made of brass, mat nickel-plated DN 10, DN 15 and DN 20
More informationV311. Venta. Three-way Plug Valve, Flanged PN 16
1 Three-way Plug Valve, Flanged PN 16 can be used in a wide range of applications, such as heating, cooling, air handling and domestic hot water systems. Soft EPDM seals provide tight shut off. The valve
More informationDescription Pressure range Connection thread Device Page
Pressure Regulator Pressure range onnection thread Device Page max. 22 l/min miniature -850 0 mbar 1 8 NPT V800.02 max. 22 l/min miniature -850 0 mbar 10-32 and flange V900.02 max. 0 l/min precise -1 +0,.4
More informationPressure reduction controller (PN 16, 25, 40)
Pressure reduction controller (PN 16, 25, 40) AFD / VFG 2( - for water AFD / VFGS 2 - for steam Description The controller has a control valve, an actuator with one control diaphragm and a spring for pressure
More informationPressure Reducing Valve for Steam Type 2333 A
Pressure Reducing Valve for Steam Type 2333 A Fig. 1 Type 2333 A 1. Design and principle of operation The pressure reducing valve consists of a balanced control valve and a closing actuator equipped with
More informationRadiator valves VDN2.. VEN2.. VUN2..
2 106 EN 215 Straight valves VDN2.. Angle valves VEN2.. Reverse angle valves VUN2.. ACVATIX TM Radiator valves VDN2.. VEN2.. VUN2.. NF norm, for 2-pipe heating systems Valve bodies made of brass, mat nickel-plated
More informationFloor heating. Floor heating manifolds Distributors
Floor heating Floor heating manifolds Distributors IMI TA / Floor heating control / Floor heating Floor heating These floor heating distributor manifolds are of size G1, and are supplied in pairs, i.e.
More informationManual Actuated Boiler Blowdown Valves
Manual Actuated Boiler Blowdown Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Operation 5. Maintenance 6. Spare parts p.1 1. Safety
More informationMaterials : Stainless steel ASTM A351 CF8M
Certificat 3.1 Size: Ends : Min Temperature : Max Temperature : DN 15 to DN 200 PN16 Flanges R.F. - 20 C + 200 C Max Pressure : 16 Bars Specifiations : Removable stainless steel filter Bolted bonnet with
More informationPressure Reducing Valve DMV 750 set range: bar
Pressure Reducing Valve DMV 750 set range:.0-6.0 bar Advantage pressure setting possible at any time, also during operation hermetically sealed by valve diaphragm high level of operating safety and long
More informationInstallation, Operating and Maintenance Manual Overflow Regulator Type 94/ 94 E
Installation, Operating and Maintenance Manual Overflow Regulator Type 94/ 94 E Table of content 1. General information on installation, operating and maintenance instructions 1.1 Hazard notices 1.2 Qualified
More informationMounting and operating instructions EB 2530 EN. Self-operated Pressure Regulator. Pressure Reducing Valve Type M 44-2
Self-operated Pressure Regulator Pressure Reducing Valve Type M 44-2 Type M 44-2, connection G 1 4, K VS = 0.15 Type M 44-2, connection G 1, K VS = 6 Fig. 1 Type M 44-2 Pressure Reducing Valve Mounting
More informationDifferential pressure controller with flow limitation (PN 16, 25, 40) AFPB / VFQ 2(1) AFPB-F / VFQ 2(1)
Data sheet Differential pressure controller with flow limitation (PN 16, 25, 40) AFPB / VFQ 2( AFPB-F / VFQ 2( return mounting, adjustable setting return mounting, fixed setting Description The controller
More informationSTAINLESS STEEL LOW PRESSURE REDUCING VALVE LPRV ELITE
MAIN CHARACTERISTICS The stainless steel LPRV elite low pressure reducer is intended for the pressure reduction of the fluids such as water, air, clear liquids not in charge of and the compatible gases
More informationVBGx-xx-xx Externally Threaded Control Ball Valves PN25 (DN15 TO DN32)
VGx-xx-xx Externally Threaded Control all Valves PN25 (DN15 TO DN32) PPLICTION The VG2 2-Way and VG3 3-Way Control all Valves control hot and chilled water with glycol solutions up to 50% according to
More information2 - way valve (NO) for steam, pressure relieved (PN 25) VGS - external thread
Data sheet 2 - way valve (NO) for steam, pressure relieved (PN 25) VGS - external thread Description VGS is pressure relieved 2-way normally open (NO) valves for steam, designed to be combined with: -
More informationTA-Modulator. Combined control & balancing valves for small terminal units Pressure independent balancing and control valve for modulating control
TA-Modulator Combined control & balancing valves for small terminal units Pressure independent balancing and control valve for modulating control IMI TA / Control valves / TA-Modulator TA-Modulator The
More informationLESER Global Standard Tightness Test. Content
LESER Global Stanar Page 1/29 Content 1 Purpose... 1 2 Scope... 1 3 References... 1 4 Introuction... 2 5 Test Proceures at LESER... 3 6 Test Equipment at LESER... 3 7 Seat tightness test proceure, Test
More informationMounting and Operating Instructions EB 2555 EN. Self-operated Pressure Regulators. Pressure Reducing Valves Type 50 ES Type 50 EM.
Self-operated Pressure Regulators Pressure Reducing Valves Type 50 ES Type 50 EM Type 50 ES Type 50 EM Fig. 1 Pressure reducing valves Mounting and Operating Instructions EB 2555 EN Edition November 2011
More informationPressure Independent Control Valve (PICV) Fig DN15-32
Installation and Operating Instructions Pressure Independent Control Valve (PICV) Fig. 1932 - DN15-32 GENERAL NOTES The Hattersley Fig.1932 PICV; can be used in variable volume heating and chilled water
More information553 Series.
38467.03 www.caleffi.com Pre-adjustable filling units Copyright 01 Caleffi 3 Series Function The automatic filling valve is a device consisting of a pressure reducing valve with compensating seat, visual
More informationMounting and Operating Instructions EB 3007 EN. Self-operated Pressure Regulators. Type Type Differential Pressure Regulators (opening)
Self-operated Pressure Regulators Type 42-20 Type 42-25 Differential Pressure Regulators (opening) Translation of original instructions Type 42-20 Differential Pressure Regulator Type 42-25 Differential
More informationDesde1963. Válvulas Pilotadas. Proveedor Integral. la Industria
esde96 Válvulas Pilotadas Proveedor Integral de Por Soluciones Aire para la Industria Otras válvulas de proceso Cuerpos de Bronce, hierro fundido y conexión bridada, para completar la gama de soluciones.
More informationPressure relief valve DHV 712 DN 65-80: 0,5-10 bar, DN : 0,3-4 bar, DN 100: 0,5-6 bar
Pressure relief valve DHV 7 DN 5-80: 0,5-0 bar, DN 5-00: 0, - bar, DN 00: 0,5 - bar Advantage for high pressure stability reliable reduction of pressure peaks and pulsations pressure setting possible at
More informationDifferential Pressure Control Valve (DPCV)
Differential Pressure Control Valve (DPCV) PATENTED Technical Data and Installation Instructions Page 1 V2 The modulating valves ART 241 balance and control the differential pressure (DPCV) automatically
More informationPressure Dump Valve Service Kit for Series 2300 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit
More informationSTA-F Description. STA-F Prefab insulation Measuring nipples
TA STA-F 5-5-1 5 Balancing valves September 1985 STA-F is a flanged balancing valve available in sizes DN 20-300, and has been designed with an oblique seat in order to give low resistance and large flows
More informationPressure relief valve DHV 716 set range: 0,5-10,0 bar
Pressure relief valve DHV 7 set range: 0,5-0,0 bar Advantage pressure setting possible at any time, also during operation optimum monitoring valves high reproducibility of the set pressure high level of
More informationTA-FUSION-P. Combined control & balancing valves Pressure independent combined balancing and control valves with independent EQM characteristics
TA-FUSION-P Combined control & balancing valves Pressure independent combined balancing and control valves with independent EQM characteristics IMI TA / Control valves / TA-FUSION-P TA-FUSION-P These innovative
More information