Push-in fittings NPQH

Transcription

1

2 Key features Application Effortless selection of the right fitting. Quick Star offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard and function fittings. Overview of tubing/fitting combination Applications Fitting Description Economical QS, QS-B PEN The universal combination at an attractive price. Can be widely used thanks to resistant materials. Easy to install thanks to optimised bending radii. Limited reset effect. NPQM PEN Attractively priced: the universal solution for metal fittings. Perfect for standard pneumatic applications in many different fields. Wide range of variants QS, QS-B PUN Over 1000 types for maximum flexibility in standard applications. Hydrolysis resistant NPQP PUN-H For applications in damp environments or in contact with water at up to 60 C. PUN-H - microbe-resistant thanks to modified plastic. Resistant to pressure QS, NPQH PAN Secure connection when used with pressure ranges of up to 14 bar. Economical for pneumatic installations in the high pressure ranges. NPQH PAN-R The powerful combination for applications involving pressure ranges up to 16 bar: For example, for applications with the pressure booster DPA. NPQH, NPQM PAN-MF Robust, flexible and reliable connection for the automotive industry. Fulfils the requirements according to DIN Heat resistant NPQH PFAN For reliable compressed air supply in high temperature ranges. Whether with 10 bar at 80 C or 6 bar at 150 C always delivers maximum process security. Anti-static NPQM PUN-CM Electrically conductive tubing combined with a solid-metal fitting Approved for the food industry Resistant to cleaning agents NPQP PUN-H Food and Drug Administration certification for use in the food industry: The hydrolysis-resistant combination with increased functions. CRQS PFAN Designed to meet the highest demands, thanks to maximum corrosion protection: This combination shines in applications which require the highest possible hygiene standards for food. NPQH, NPQP PLN The cost-effective alternative to stainless steel, perfect for e.g. critical environments such as the splash zone: resistant to practically all common cleaning agents, with maximum corrosion protection. Resistant to media CRQS PFAN Completely resistant to all cleaning agents and lubricants and even permits the transportation of acids and lyes without any problems. Flame-retardant NPQH, NPQM PUN-V0 Safe in areas where there is a risk of fire thanks to flame-retardant properties to UL94. Resistant to welding spatter NPQH, NPQM PUN-V0-C The economical combination for applications not in close proximity to welding applications. Reliable thanks to a tubing wall thickness of 2 mm for all diameters. QS-V0 PAN-V0 Also reliable for applications in direct proximity to welding splatter. Double-sheathed tube and special fitting. 2 Internet: Subject to change 2014/03

3 Key features Push-in fittings product range QSM, Quick Star, Mini Internet: qsm QS, Quick Star, standard Internet: qs Miniature push-in fittings for maximum component density in confined spaces. For pneumatic applications with a temperature range up to 80 C and a pressure range up to 14 bar. O.D. of 2, 3, 4 and 6 mm with connecting threads M3, M5, M6, M7, Rx and Gx. Wide selection of push-in fittings for pneumatic applications with a temperature range up to 80 C and a pressure range up to 14 bar. O.D. of 4, 6, 8, 10, 12 and 16 mm with connecting threads Rx R½ and Gx G½. QSM-B, Quick Star, Mini Internet: qsm-b QS-B, Quick Star, standard Internet: qs-b Miniature push-in fittings for maximum component density in confined spaces. For core pneumatic applications with a temperature range up to 60 C and a pressure range up to 10 bar. O.D. of 3, 4 and 6 mm with connecting threads M3, M5, M7 and Rx. Push-in fittings for core pneumatic applications with a temperature range up to 60 C and a pressure range up to 10 bar. O.D. of 4, 6, 8, 10, 12 and 16 mm with connecting threads M5 and Rx R½. CRQS, Quick Star, stainless steel Internet: crqs QS-V0, Quick Star, flame-retardant Internet: qs-v0 Stainless steel push-in fitting. High corrosion resistance (CRC4) and chemical resistance with approval for use in the food and packaging industry. For pneumatic applications with a temperature range up to 120 C and a pressure range up to 10 bar. O.D. of 4, 6, 8, 10, 12 and 16 mm with connecting threads M5 and Rx R½. Flame-retardant push-in fitting for use in all areas where there is a risk of fire, for example welding systems in the automotive industry and in the construction industry. For pneumatic applications with a temperature range up to 60 C and a pressure range up to 10 bar. O.D. of 4, 6, 8, 10 and 12 mm with connecting threads Rx R½ and Gx G½. 2014/03 Subject to change Internet: 3

4 Key features Push-in fittings product range NPQH Internet: npqh NPQM Internet: npqm All metal push-in fitting made of chemically nickel-plated brass. High corrosion resistance (CRC3) and chemical resistance with approval for use in the food and packaging industry. For pneumatic applications with a temperature range up to 150 C and a pressure range up to 16 bar. O.D. of 4, 6, 8, 10, 12 and 14 mm with connecting threads M5, M7 and Gx G½. Attractively priced metal push-in fitting for pneumatic applications with a temperature range up to 70 C and a pressure range up to 16 bar. O.D. of 3, 4, 6, 8, 10, 12 and 14 mm with connecting threads M5, M7 and Gx G½. NPQP Internet: npqp Polypropylene fitting for use in applications with extreme media influences. For pneumatic applications with a temperature range up to 60 C and a pressure range up to 10 bar. O.D. of 4, 6, 8, 10 and 12 mm with connecting threads Rx R½. Functional push-in fittings product range QSK, Quick Star, self-sealing push-in fitting Internet: qsk Push-in fitting that blocks the air flow after the tubing is disconnected. For pneumatic applications with a temperature range up to 60 C and a pressure range up to 14 bar. O.D. of 4, 6, 8, 10 and 12 mm with connecting threads M5, Rx R½ and Gx G½. QSR, Quick Star, rotary push-in fitting Internet: qsr Push-in fitting with swivel connection, rotatable by 360. The ball bearing enables rotating movements in the application up to max. 500 rpm. For pneumatic applications with a temperature range up to 60 C and a pressure range up to 14 bar. O.D. of 4, 6, 8, 10 and 12 mm with connecting threads M5, Rx R½ and Gx G½. 4 Internet: Subject to change 2014/03

5 General technical data Size Standard Design Push-pull principle Mounting position Any Type of seal on threaded plug Sealing ring Nominal tightening torque [Nm] 1 (_20%) at connecting thread M5 7 (_20%) at connecting thread Gx 11 (_20%) at connecting thread G¼ 18 (_20%) at connecting thread Gy insertion depth [mm] 13 at tubing O.D. 4 mm 15.8 at tubing O.D. 6 mm 16 at tubing O.D. 8 mm 18.3 at tubing O.D. 10 mm 19.5 at tubing O.D. 12 mm 22.5 at tubing O.D. 14 mm Operating and environmental conditions Operating pressure for entire [bar] temperature range Operating medium Compressed air to ISO :2010 [7: : ] Note on operating/pilot medium Lubricated operation possible Ambient temperature 1) [ C] Corrosion resistance class CRC 2) 3 Suitable for use in the food industry As per manufacturer's declaration 1) Observe the operating range of the plastic tubing. 2) Corrosion resistance class 3 according to Festo standard Components subject to high corrosion stress. Externally visible parts with primarily functional surface requirements which are in direct contact with a normal industrial environment or media such as solvents and cleaning agents. Materials Housing Releasing ring Tube retaining claw Threaded seal seal Note on materials Nickel-plated brass Nickel-plated brass High-alloy stainless steel FPM FPM RoHS-compliant Tube assembly/dismantling Assembly Dismantling The prerequisite for ensuring that the inside seal is securely held and protected against damage is that the tube is cut into straight lengths and deburred. 1) Insert tubing until the end stop. It is important to ensure that the tubing is inserted into the inside seal. Depending on the tolerance position of the tubing and the seal, the contact of the tubing with the seal may be wrongly interpreted as the end stop. 2) Check that the tubing connector is securely held by pulling gently on the tube. 1) The tubing can be detached easily by pressing and holding down the releasing ring. Remove the tubing carefully from the fitting. 2) Before re-using the tubing, remove the damaged part by cutting it off. 2014/03 Subject to change Internet: 5

6 Product range overview Design Version Type Connection D1 Connection D2 Page/ M thread R thread G thread O.D. Push-in sleeve O.D. Push-in sleeve Internet Straight design Push-in fitting external thread with external hexagon NPQH-D M5 4, 6 9 M7 4, 6 Gx 4, 6, 8 G¼ 6, 8, 10, 12 Gy 8, 10, 12, 14 G½ 10, 12, 14 Push-in fitting internal thread with external hexagon NPQH-D Gx 4, 6, 8 10 G¼ 4, 6, 8 Push-in fitting with push-in sleeve NPQH-D M5 4, 6 10 Gx 4, 6, 8 G¼ 6, 8, 10, 12 Gy 10, 12 G½ 12 Push-in fitting external thread with internal hexagon NPQH-DK M5 4, 6 11 M7 4, 6 Gx 4, 6, 8 G¼ 8, 10 Gy 12 Push-in connector NPQH-D NPQH-D reducing , 12 Push-in connector with push-in sleeve NPQH-D , 6 8 4, 6, , 8, , 8, 10, Push-in sleeve NPQH-D Internet: Subject to change 2014/03

7 Product range overview Design Version Type Connection D1 Connection D2 Page/ M thread R thread G thread O.D. Push-in sleeve O.D. Push-in sleeve Internet Straight design Push-in bulkhead fitting internal thread with external hexagon NPQH-H Gx 4, 6, 8 14 G¼ 6, 8 Push-in bulkhead connector NPQH-H Blanking plug NPQH-P Plug screw NPQH-BK M5 15 M7 Gx G¼ Gy G½ L-shape Push-in L-fitting, 360 orientable external thread with external hexagon NPQH-L M5 4, 6 16 M7 4, 6 Gx 4, 6, 8 G¼ 6, 8, 10, 12 Gy 8, 10, 12, 14 G½ 10, 12, 14 Push-in L-fitting, long, 360 orientable external thread with external hexagon NPQH-LL Gx 4, 6, 8 17 G¼ 6, 8, 10 Gy 12 Push-in L-connector NPQH-L /03 Subject to change Internet: 7

8 Product range overview Design Version Type Connection D1 Connection D2 Page/ M thread R thread G thread O.D. Push-in sleeve O.D. Push-in sleeve Internet T-shape Push-in T-fitting, 360 orientable external thread with external hexagon NPQH-T M5 4, 6 18 Gx 4, 6, 8 G¼ 6, 8, 10, 12 Gy 8, 10, 12 G½ 10, 12 Push-in T-connector NPQH-T NPQH-T reducing Y-shape Push-in Y-connector NPQH-Y NPQH-Y reducing Internet: Subject to change 2014/03

9 Push-in fitting NPQH-D External thread with external hexagon M and G thread Connection Nominal size O.D. L1 L2 ß1 ß2 Weight/ D1 [mm] D2 [g] M thread with sealing ring M NPQH-D-M5-Q4-P NPQH-D-M5-Q6-P10 10 M NPQH-D-M7-Q4-P NPQH-D-M7-Q6-P10 10 G thread with sealing ring Gx NPQH-D-G18-Q4-P NPQH-D-G18-Q6-P NPQH-D-G18-Q8-P10 10 G¼ NPQH-D-G14-Q6-P NPQH-D-G14-Q8-P NPQH-D-G14-Q10-P NPQH-D-G14-Q12-P10 10 Gy NPQH-D-G38-Q8-P NPQH-D-G38-Q10-P NPQH-D-G38-Q12-P NPQH-D-G38-Q14-P10 10 G½ NPQH-D-G12-Q NPQH-D-G12-Q NPQH-D-G12-Q /03 Subject to change Internet: 9

10 Push-in fitting NPQH-D Internal thread with external hexagon G thread Connection Nominal O.D. D4 L1 L2 ß1 Weight/ D1 [mm] D2 [g] G thread with sealing ring Gx NPQH-D-G18F-Q4-P NPQH-D-G18F-Q6-P NPQH-D-G18F-Q8-P10 10 G¼ NPQH-D-G14F-Q4-P NPQH-D-G14F-Q6-P NPQH-D-G14F-Q8-P10 10 Push-in fitting NPQH-D with push-in sleeve M and G thread Connection Nominal Push-in sleeve L1 L2 ß1 Weight/ D1 [mm] D2 _0.5 _0.5 [g] M thread with sealing ring M NPQH-D-M5-S4-P NPQH-D-M5-S6-P10 10 G thread with sealing ring Gx NPQH-D-G18-S4-P NPQH-D-G18-S6-P NPQH-D-G18-S8-P10 10 G¼ NPQH-D-G14-S6-P NPQH-D-G14-S8-P NPQH-D-G14-S10-P NPQH-D-G14-S12-P10 10 Gy NPQH-D-G38-S10-P NPQH-D-G38-S12-P10 10 G½ NPQH-D-G12-S Internet: Subject to change 2014/03

11 Push-in fitting NPQH-DK External thread with internal hex M thread G thread Connection Nominal O.D. D6 L1 L2 ß1 Weight/ D1 [mm] D2 [g] M thread with sealing ring M NPQH-DK-M5-Q4-P NPQH-DK-M5-Q6-P10 10 M NPQH-DK-M7-Q4-P NPQH-DK-M7-Q6-P10 10 G thread with sealing ring Gx NPQH-DK-G18-Q4-P NPQH-DK-G18-Q6-P NPQH-DK-G18-Q8-P10 10 G¼ NPQH-DK-G14-Q8-P NPQH-DK-G14-Q10-P10 10 Gy NPQH-DK-G38-Q12-P /03 Subject to change Internet: 11

12 Push-in connector NPQH-D Reducing O.D. Nominal O.D. D1 [mm] D2 _1 [g] D6 L1 Weight/ NPQH-D-Q4-E-P NPQH-D-Q6-E-P NPQH-D-Q8-E-P NPQH-D-Q10-E-P NPQH-D-Q12-E-P NPQH-D-Q14-E-P10 10 Reducing NPQH-D-Q6-Q4-P NPQH-D-Q8-Q6-P NPQH-D-Q12-Q8-P NPQH-D-Q14-Q10-P NPQH-D-Q14-Q12-P Internet: Subject to change 2014/03

13 Push-in connector NPQH-D with push-in sleeve O.D. D1 Nominal [mm] Push-in sleeve D2 L1 Weight/ [g] NPQH-D-S6-Q4-P NPQH-D-S8-Q4-P NPQH-D-S10-Q4-P NPQH-D-S8-Q6-P NPQH-D-S10-Q6-P NPQH-D-S12-Q6-P NPQH-D-S14-Q6-P NPQH-D-S10-Q8-P NPQH-D-S12-Q8-P NPQH-D-S14-Q8-P NPQH-D-S12-Q10-P NPQH-D-S14-Q10-P NPQH-D-S14-Q12-P10 10 Push-in sleeve NPQH-D Push-in sleeve D1 Nominal [mm] L1 Weight/ [g] NPQH-D-S4-E-P NPQH-D-S6-E-P NPQH-D-S8-E-P NPQH-D-S10-E-P NPQH-D-S12-E-P NPQH-D-S14-E-P /03 Subject to change Internet: 13

14 Push-in bulkhead fitting NPQH-H Internal thread with external hexagon G thread Connection Nominal O.D. B1 L1 L2 ß1 Weight/ D1 [mm] D2 max. _0.5 [g] G thread with sealing ring Gx 4 7 M12x NPQH-H-G18F-Q4-P M14x NPQH-H-G18F-Q6-P M16x NPQH-H-G18F-Q8-P10 10 G¼ 6 10 M14x NPQH-H-G14F-Q6-P M16x NPQH-H-G14F-Q8-P10 10 Push-in bulkhead connector NPQH-H O.D. Nominal B1 L1 ß1 Weight/ D1 [mm] max. [g] M12x NPQH-H-Q4-E-P M14x NPQH-H-Q6-E-P M16x NPQH-H-Q8-E-P M18x NPQH-H-Q10-E-P M20x NPQH-H-Q12-E-P Internet: Subject to change 2014/03

15 Blanking plug NPQH-P Push-in sleeve D1 D6 _0.3 _0.5 [g] L1 Weight/ NPQH-P-S4-P NPQH-P-S6-P NPQH-P-S8-P NPQH-P-S10-P NPQH-P-S12-P NPQH-P-S14-P10 10 Plug screw NPQH-BK M and G thread Connection L1 L2 ß1 Weight/ D1 max. [g] M thread with sealing ring M NPQH-BK-M5-P10 10 M NPQH-BK-M7-P10 10 G thread with sealing ring Gx NPQH-BK-G18-P10 10 G¼ NPQH-BK-G14-P10 10 Gy NPQH-BK-G38-P10 10 G½ NPQH-BK-G /03 Subject to change Internet: 15

16 Push-in L-fitting NPQH-L 360 orientable External thread with external hexagon M and G thread Connection Nominal O.D. D6 H1 H2 L1 ß1 Weight/ D1 [mm] D2 [g] M thread with sealing ring M NPQH-L-M5-Q4-P NPQH-L-M5-Q6-P10 10 M NPQH-L-M7-Q4-P NPQH-L-M7-Q6-P10 10 G thread with sealing ring Gx NPQH-L-G18-Q4-P NPQH-L-G18-Q6-P NPQH-L-G18-Q8-P10 10 G¼ NPQH-L-G14-Q6-P NPQH-L-G14-Q8-P NPQH-L-G14-Q10-P NPQH-L-G14-Q12-P10 10 Gy NPQH-L-G38-Q8-P NPQH-L-G38-Q10-P NPQH-L-G38-Q12-P NPQH-L-G38-Q14-P10 10 G½ NPQH-L-G12-Q NPQH-L-G12-Q NPQH-L-G12-Q Internet: Subject to change 2014/03

17 Push-in L-fitting (long) NPQH-LL 360 orientable External thread with external hexagon G thread Connection Nominal O.D. D6 H1 H2 L1 ß1 Weight/ D1 [mm] D2 _0.5 _0.5 _1 _1 [g] G thread with sealing ring Gx NPQH-LL-G18-Q4-P NPQH-LL-G18-Q6-P NPQH-LL-G18-Q8-P10 10 G¼ NPQH-LL-G14-Q6-P NPQH-LL-G14-Q8-P NPQH-LL-G14-Q10-P10 10 Gy NPQH-LL-G38-Q10-P10 10 Push-in L-connector NPQH-L O.D. D1 Nominal size [mm] H1 L1 Weight/ [g] NPQH-L-Q4-E-P NPQH-L-Q6-E-P NPQH-L-Q8-E-P NPQH-L-Q10-E-P NPQH-L-Q12-E-P NPQH-L-Q14-E-P /03 Subject to change Internet: 17

18 Push-in T-fitting NPQH-T 360 orientable External thread with external hexagon M and G thread Connection Nominal O.D. D6 H1 H2 L1 ß1 Weight/ D1 [mm] D2 [g] M thread with sealing ring M NPQH-T-M5-Q4-P NPQH-T-M5-Q6-P10 10 G thread with sealing ring Gx NPQH-T-G18-Q4-P NPQH-T-G18-Q6-P NPQH-T-G18-Q8-P10 10 G¼ NPQH-T-G14-Q6-P NPQH-T-G14-Q8-P NPQH-T-G14-Q10-P NPQH-T-G14-Q12-P10 10 Gy NPQH-T-G38-Q8-P NPQH-T-G38-Q10-P NPQH-T-G38-Q12-P10 10 G½ NPQH-T-G12-Q NPQH-T-G12-Q Internet: Subject to change 2014/03

19 Push-in T-connector NPQH-T Reducing O.D. Nominal O.D. D2 D6 H1 L1 Weight/ D1 [mm] [g] NPQH-T-Q4-E-P NPQH-T-Q6-E-P NPQH-T-Q8-E-P NPQH-T-Q10-E-P NPQH-T-Q12-E-P NPQH-T-Q14-E-P10 10 Reducing NPQH-T-Q6-Q4-P NPQH-T-Q8-Q6-P NPQH-T-Q10-Q8-P NPQH-T-Q12-Q10-P /03 Subject to change Internet: 19

20 Push-in Y-connector NPQH-Y Reducing O.D. D1 Nominal O.D. B1 [mm] D2 [g] D6 H1 Weight/ NPQH-Y-Q6-E-P NPQH-Y-Q8-E-P NPQH-Y-Q10-E-P10 10 Reducing NPQH-Y-Q6-Q4-P NPQH-Y-Q8-Q6-P NPQH-Y-Q10-Q8-P Internet: Subject to change 2014/03