DEPARTMENT OF LICENSING AND REGULATORY AFFAIRS DIRECTOR S OFFICE GENERAL INDUSTRY SAFETY AND HEALTH STANDARD
|
|
|
- Edmund Murphy
- 5 years ago
- Views:
Transcription
1 DEPARTMENT OF LICENSING AND REGULATORY AFFAIRS DIRECTOR S OFFICE GENERAL INDUSTRY SAFETY AND HEALTH STANDARD By authority conferred on the director of the department of licensing and regulatory affairs by sections 16 and 21 of 1974 PA 154, MCL and , and Executive Reorganization Order Nos , , , and , MCL , , , and ) GENERAL INDUSTRY SAFETY AND HEALTH STANDARD PART 2. WALKING-WORKING SURFACES R Scope. Rule 201. This standard applies to all general industry workplaces. This standard covers all walking-working surfaces unless specifically excluded by an individual section of this standard. R Adoption of federal standard. Rule 202. (1) The federal Occupational Safety and Health Administration (OSHA) regulation 29 C.F.R Subpart D Walking-Working Surfaces, as amended November 18, 2016, is adopted by reference in these rules. (2) The regulation 29 C.F.R Subpart D Walking-Working Surfaces includes all of the following: (a) 29 C.F.R. Part Scope and definitions. (b) 29 C.F.R. Part General requirements. (c) 29 C.F.R. Part Ladders. (d) 29 C.F.R. Part Step bolts and manhole steps. (e) 29 C.F.R. Part Stairways. (f) 29 C.F.R. Part Dockboards. (g) 29 C.F.R. Part Scaffolds and rope descent systems. (h) 29 C.F.R. Part Duty to have fall protection and falling object protection. (i) 29 C.F.R. Part Fall protection systems and falling object protection criteria and practices. (j) 29 C.F.R. Part Training requirements. (3) A reference to (j) Powered platforms for building maintenance, means General Industry Safety and Health Standard Part 5 Powered Platforms for Building Maintenance, R November 29, 2016
2 2 (4) A reference to (c)(2)(v) Vehicle-mounted elevating and rotating work platforms, means General Industry Safety and Health Standard Part 58 Aerial Work Platforms, R (1). (5) A reference to Personal fall protection systems, means General Industry Safety and Health Standard Part 33 Personal Protective Equipment. (6) A reference to Specifications for accident prevention signs and tags, means General Industry Safety Standard Part 37 Accident Prevention Signs and Tags. (7) A reference to Telecommunications, means General Industry Safety and Health Standard Part 50 Telecommunications for General Industry. (8) A reference to Electric Power Generation, Transmission, and Distribution, means General Industry Safety and Health Standard Part 86 Electric Power Generation, Transmission, and Distribution. (9) A reference to Fall protection systems criteria and practices, means Construction Safety Standard Part 45 Fall Protection. (10) A reference to Training requirements, means Construction Safety Standard Part 45 Fall Protection. (11) A reference to 1910 Subpart I Personal Protective Equipment, means General Industry Safety and Health Standard Part 33 Personal Protective Equipment. (12) A reference to 1926 Subpart L Scaffolds, means Construction Safety Standard Part 12 Scaffolds and Scaffold Platforms, and Construction Safety Standard Part 32 Aerial Work Platforms (13) A reference to 1926 Subpart M Fall Protection, means Construction Safety Standard Part 45 Fall Protection. (14) The availability information for the OSHA standards adopted in these rules is in R and MIOSHA standards referenced in these rules are in R (15) The adopted federal regulations shall have the same force and effect as a rule promulgated under the Michigan Occupational Safety and Health Act, 1974 PA 154, MCL to History: 2018 MR 2, Eff. Feb. 2, R Effective Dates. Rule 203. The following are the effective dates of the adopted OSHA standards in Michigan: (a) A reference to January 17, 2017, means the effective date of this standard in Michigan, which is 7 days after filing with the Secretary of State. (b) A reference to May 17, 2017, means four months after the effective date of this standard in Michigan, which is 7 days after filing with the Secretary of State. (c) A reference to November 20, 2017, means 10 months after the effective date of this standard in Michigan, which is 7 days after filing with the Secretary of State. (d) A reference to November 19, 2018, means November 19, (e) A reference to November 18, 2036, means November 18, History: 2018 MR 2, Eff. Feb. 2, 2018.
3 3 R Availability of OSHA adopted regulations. Rule 204. (1) The OSHA regulations adopted in these rules are available from the United States Department of Labor, Occupational Safety and Health Administration website: at no charge, as of the time of adoption of these rules. (2) The regulations adopted in these rules are available for inspection at the Department of Licensing and Regulatory Affairs, MIOSHA Regulatory Services Section, 530 West Allegan Street, P.O. Box 30643, Lansing, Michigan, (3) The regulations adopted in these rules may be obtained from the publisher or may be obtained from the Department of Licensing and Regulatory Affairs, MIOSHA Regulatory Services Section, 530 West Allegan Street, P.O. Box 30643, Lansing, Michigan, , at the cost charged in this rule, plus $20.00 for shipping and handling. History: 2018 MR 2, Eff. Feb. 2, R MIOSHA referenced standards. Rule 205. The following Michigan Occupational Safety and Health Administration (MIOSHA) standards are referenced in these rules. Up to 5 copies of these standards may be obtained at no charge from the Michigan Department of Licensing and Regulatory Affairs, MIOSHA Regulatory Services Section, 530 West Allegan Street, P.O. Box 30643, Lansing, Michigan, or via the internet at website: For quantities greater than 5, the cost, at the time of adoption of these rules, is 4 cents per page. (a) Construction Safety Standard Part 12 Scaffolds and Scaffold Platforms, R to R (b) Construction Safety Standard Part 32 Aerial Work Platforms, R to R (c) Construction Safety Standard Part 45 Fall Protection, R to R (d) General Industry Safety and Health Standard Part 5 Powered Platforms for Building Maintenance, R to R (e) General Industry Safety and Health Standard Part 33 Personal Protective Equipment, R to R (f) General Industry Safety Standard Part 37 Accident Prevention Signs and Tags, R to R (g) General Industry Safety and Health Standard Part 50 Telecommunications for General Industry, R to R (h) General Industry Safety and Health Standard Part 58 Aerial Work Platforms, R to R (i) General Industry Safety and Health Standard Part 86 Electric Power Generation, Transmission, and Distribution, R to R
4 4 R Rescinded. R Rescinded. R Rescinded. R Rescinded. R Rescinded. R Rescinded. R Rescinded. R Rescinded. R Rescinded. R Rescinded.
5 5 R Rescinded. R Rescinded. R Rescinded. History: 1989 AACS; 2018 MR 2, Eff. Feb. 2, R Rescinded. History: 1989 AACS; 2018 MR 2, Eff. Feb. 2, R Rescinded. R Rescinded. R Rescinded. R Rescinded. R Rescinded. R Rescinded.
6 6 R Rescinded. R Rescinded. R Rescinded.
Walking-Working Surfaces
Walking-Working Surfaces 29 CFR 1910, Subpart D Presented by: Chesapeake Region Safety Council Rod Markley, CSP, CHST, CET Subpart D - Walking-Working Surface Topics we will cover: Background of rule Overview
Reporting, Recording & more Walking Working Surfaces Local Emphasis Program Your Questions
Reporting, Recording & more Walking Working Surfaces Local Emphasis Program Your Questions As of January 1, 2015, employers must report the following to OSHA: All work-related fatalities within 8 hours
New Walking-Working Surfaces and PPE (Fall Protection) Rule. Purpose of the New Rule
New Walking-Working Surfaces and PPE (Fall Protection) Rule John Olaechea Compliance Assistance Specialist OSHA Region VIII 1244 Speer Blvd Suite 551 Denver, CO 80204 720-264-6586 olaechea.john@dol.gov
Walking-Working Surfaces and Fall Protection Standards Update. OSHA General Industry
Walking-Working Surfaces and Fall Protection Standards Update OSHA General Industry Background Slips, trips, and falls account for a majority of all general industry injury incidents. Caused 849 workplace
Why Update. OSHA updated Walking Working Standard. Who & What it Covers. Housekeeping (a) 6/25/ nd Leading cause of Workplace fatalities
OSHA updated Walking Working Standard Why Update 2nd Leading cause of Workplace fatalities $70 Billion Workers Comp Cost - US 100+ Million lost workdays/year - US Cari Gray, CSP Safety Consultant Ohio
OSHA s new walking working surfaces standards
OSHA s new walking working surfaces standards changes and new requirements Inspection of walking working surfaces 1910.22(d) Regularly and as needed and correct, repair, or guard against hazardous conditions;
Subparts D and I Walking-Working Surfaces & Personal Protective Equipment Final Rule
Subparts D and I Walking-Working Surfaces & Personal Protective Equipment Final Rule OSHA s Mission To Assure So Far as Possible Every Working Man and Woman in the Nation Safe and Healthful Working Conditions...
DEPARTMENT OF LICENSING AND REGULATORY AFFAIRS CORPORATIONS, SECURITIES, AND COMMERCIAL LICENSING BUREAU SKI AREA SAFETY - GENERAL RULES
DEPARTMENT OF LICENSING AND REGULATORY AFFAIRS CORPORATIONS, SECURITIES, AND COMMERCIAL LICENSING BUREAU SKI AREA SAFETY - GENERAL RULES (By authority conferred on the director of the department of licensing
Applying Construction Fall Protection Concepts to General Industry
Applying Construction Fall Protection Concepts to General Industry Applying Construction Fall Protection Concepts to General Industry Michael Tesmer, CSP and David Jewell, CSP Conney Safety Products This
OSHA s Walking-Working Surfaces Final Rule Compliance Reference
OSHA s Walking-Working Surfaces Final Rule Compliance Reference www.lion.com OSHA s Walking-Working Surfaces Final Rule Compliance Reference OSHA s Walking-Working Surfaces Final Rule CONTENTS Slide Presentation...1
Update 29 CFR Subparts D & I
Because every life has a purpose Update 29 CFR 1910.30 Subparts D & I 1 OSHA & This Regulation OSHA has created regulations to protect workers from various hazards, including falls. OSHA has separate regulations
Key provisions of OSHA's new rule on walking/working surfaces, fall protection
ARTICLES CASES Key provisions of OSHA's new rule on walking/working surfaces, fall protection Although an overwhelming majority of general industry accidents stem from slips, trips and falls, Subpart D
Walking-Working Surfaces and Personal Protective Equipment (Fall Protection. Systems) for General Industry; Approval of Collections of Information
This document is scheduled to be published in the Federal Register on 07/06/2017 and available online at https://federalregister.gov/d/2017-14122, and on FDsys.gov DEPARTMENT OF LABOR Occupational Safety
Occupational Protective Equipment
Introduction One of the leading occupational dangers in today s workforce is the risk of death or injury due to falls. Falls from ladders, scaffolds, buildings, or other elevations have become the second
OSHA 29CFR 1910 Subpart D Walking-Working Surfaces Content
OSHA 29CFR 1910 Subpart D Walking-Working Surfaces Content 1910.28 Duty to have Fall Protection and Falling Object Protection 1910.29 Fall Protection Systems and Falling Object Protection Criteria and
Fall Hazards: One of OSHA s Big Three. By Mark A. Lies II and Elizabeth Leifel Ash I. INTRODUCTION
OPTIMUM Articles Provided by www.optimumresultsusa.com Fall Hazards: One of OSHA s Big Three By Mark A. Lies II and Elizabeth Leifel Ash I. INTRODUCTION In 2010, the Bureau of Labor Statistics (BLS) reported
This information has been developed by an OSHA Compliance Assistance Specialist and is intended to assist employers, workers, and others as they
New Walking-Working Surfaces and PPE (Fall Protection) Rule Disclaimer This information has been developed by an OSHA Compliance Assistance Specialist and is intended to assist employers, workers, and
DEPARTMENT OF LICENSING AND REGULATORY AFFAIRS AND INDUSTRY SERVICES DIRECTOR S OFFICE BUREAU OF SAFETY AND REGULATION
DEPARTMENT OF LICENSING AND REGULATORY AFFAIRS AND INDUSTRY SERVICES CONSUMER DIRECTOR S OFFICE BUREAU OF SAFETY AND REGULATION GENERAL INDUSTRY SAFETY AND HEALTH STANDARD GENERAL INDUSTRY SAFETY STANDARDS
New Walking-Working Surfaces and PPE (Fall Protection) Rule. My Background. Mary Bauer. Agenda
New Walking-Working Surfaces and PPE (Fall Protection) Rule WABA Wisconsin Agri-Business Association Annual Safety Conference Wisconsin Dells, WI July 13, 2017 Mary Bauer CIH CSP Compliance Assistance
Western Wisconsin Safety Council Eau Claire, WI August 17, 2017
New Walking-Working Surfaces and PPE (Fall Protection) Rule Western Wisconsin Safety Council Eau Claire, WI August 17, 2017 Mary Bauer CIH CSP Compliance Assistance Specialist Eau Claire Area OSHA Office
Work at height Policy
Work at Policy Introduction This policy procedure outlines the Forces responsibility to provide guidance to all police officers and staff when working at. Many serious incidents involving working at occur
7 Hazard assessment 8 Worker participation 9 Hazard elimination and control
This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. Businesses in this industry
REGULATIONS & COMPLIANCE. Riggers Safety LLC. 267 Winfield Cr. Corona, CA
ANSI Z359 REGULATIONS & COMPLIANCE Riggers Safety LLC. 267 Winfield Cr. Corona, CA 92880. 951 371 8685. www.riggerssafety.com General Industry: ANSI/ASSE Z359 Fall Protection Code Package Version 3.0 ANSI/ASSE
Fall Protection and Elevated Work
Program No: SP-010 Page 1 1.0 PURPOSE AND INTRODUCTION Fall Protection and Elevated Work To establish fall protection safety procedures for Pitt County Schools employees engaged in any of the following
OLD GI PART 3, FIXED LADDERS COMPARISON TO NEW RULES
This table compares the rescinded rules for fixed ladders from old GI Part 3 with the new rules for fixed ladders in GI Part 2, Walking-Working Surfaces. The first column contains the rescinded rule (struckthrough).
Fall Hazards at Walking and Working Surfaces What You Need to Know. Presented by PENTA Engineering Group, Inc. August 2017
Fall Hazards at Walking and Working Surfaces What You Need to Know Presented by PENTA Engineering Group, Inc. August 2017 Presenters Christopher M. Everett, PE President ceverett@pentaeng.com Michael J.
Regulation Summary: Walking-Working Surfaces & Personal Protective Equipment (Fall Protection Systems); OSHA s Final Rule
Regulatory Update Regulation Summary: Walking-Working Surfaces & Personal Protective Equipment (Fall Protection Systems); OSHA s Final Rule General Industry 29 CFR 1910 On November 17, 2016, OSHA published
Petzl Technical Institute Course Descriptions. TES, Inc Murdock Drive Knoxville, TN
Petzl Technical Institute Course Descriptions TES, Inc. 10909 Murdock Drive Knoxville, TN 37932 800-327-4036 Effective January 1, 2016 Inspection of Personal Protective Equipment for Work at Height - Competent
Walking-Working Surfaces Compliance: Practical Tips for Minimizing Slip and Fall Hazards in Light of New OSHA Subpart D Provisions
Walking-Working Surfaces Compliance: Practical Tips for Minimizing Slip and Fall Hazards in Light of New OSHA Subpart D Provisions Presented by: Barry S. Spurlock, Esq., CSP Assistant Professor/Attorney
FALL PROTECTION PROGRAM (OHS-0010)
() For Issued: December 17, 2007 Revised: 1 st Issue PAGE 1 OF 17 Table of Contents 1.0 Purpose...2 2.0 Document Control...2 2.1 Approvals...2 2.2 Responsibility...2 3.0 Definitions...3 4.0 Objective...7
Fall Protection Program
Fall Protection Program 135 College Street, Suite 100, New Haven, CT 06510 Telephone: 203-785-3550 / Fax: 203-785-7588 ehs.yale.edu 6/26/2018 CONTENTS: 1. Introduction... 3 2. Responsibilities... 3 A.
Recent OSHA Regulations. Presenter: Joe Mlynek CSP, OHST
Recent OSHA Regulations Presenter: Joe Mlynek CSP, OHST Today s Presentation Regulatory Reform Current Administration Electronic Reporting for Workplace Injuries and Illnesses Walking-Working Surface Standard
Aerial Lift Safety Program
Aerial Lift Safety Program Revision Date: 6-19-2017 TABLE OF CONTENTS Aerial Lift Safety Program 1.0 Overview... 3 2.0 Policy......3 3.0 Requirements. 3 4.0 Purpose..... 4 5.0 Scope.........4 6.0 Responsibilities........7
AIHA 1st Quarter Meeting Subparts "D" and "I" Walking-Working Surfaces & Personal Protective Equipment (Personal Fall Protection) Final Rule
AIHA 1st Quarter Meeting Subparts "D" and "I" Walking-Working Surfaces & Personal Protective Equipment (Personal Fall Protection) Final Rule Doug Huddleston, CSP OSHA Region VI Cooperative and State Programs
DUQUESNE UNIVERSITY LOCKOUT/TAGOUT PROGRAM
DUQUESNE UNIVERSITY LOCKOUT/TAGOUT PROGRAM Prepared by: Environmental Health and Safety Department TABLE OF CONTENTS Page Purpose 1 Scope 1 Introduction 2 Regulatory Requirements 2 Protective Materials
FALL PROTECTION PLAN FALL PROTECTION PROGRAM
FALL PROTECTION PLAN IMPORTANT: This document is intended to provide guidance only for developing site-specific fall protection plans for working at heights. FALL PROTECTION PLAN IMPORTANT: This document
Reducing Exposures From Confined Space Entry
Reducing Exposures From Confined Space Entry Over 1.6 million Americans work in Confined Spaces each year, and each year many accidents occur. Many of these accidents lead to serious injury or death from
OSHA Federal Standards October 1, 2016 September 30, 2017
OSHA Federal Standards October 1, 2016 September 30, 2017 29 CFR 1926 SUBPARTS 29 CFR 1926. C M L L E M M E X M MOST FREQUENTLY CITED SERIOUS VIOLATIONS IN CONSTRUCTION 2017.501(b)(13) FALL PROTECTION
Matters of Interpretation
Matters of Interpretation In OSHA's permit required confined space interpretations we find examples of the why, how, and does/does not of a safety standard. By Gary M. Hutter Feb 01, 2005 JUST about every
Page: 7/15/2009. Energy control procedures Use of lockout/tagout equipment to ensure safe work practices.
1 of 6 1.0 PURPOSE This program applies to the installation, service, maintenance, or removal of any type of machinery, equipment, or components, in which the unexpected start up or release of stored energy
Control of Hazardous Energy. Environmental Health and Safety
Control of Hazardous Energy Environmental Health and Safety 11/01/2014 1 CONTROL OF HAZARDOUS ENERGY (LOCKOUT-TAGOUT) OSHA CFR 1910.147 Revised Date: November 2014 STATEMENT OF POLICY Ball State University
Reviewed: New Effective: 5/18/12 Supersedes: New Preparer: Owner: Approver: Team Member, Occupational Safety Industrial Hygiene
Procedure No.: BC032.027 Page: 1 of 15 Preparer: Owner: Approver: Team Member, Occupational Safety Industrial Hygiene Manager, Occupational Safety Industrial Hygiene Vice President, Ecology & Safety (Signature
Click to edit Master title style. Fall Protection for the Construction Industry Webinar 04/30/2014
Click to edit Master title style Fall Protection for the Construction Industry Webinar 04/30/2014 Webinar Rules Please mute your computer sound Please mute your phones Please do not put your phones on
LIGHTHOUSE SAFETY TRAINING 2018
Specialists in Fall Protection, Rescue and Confined Spaces tele (262) 790.1155 fax (262) 783-6211 www.lighthousesafety.com csr@lighthousesafety.com 3620 North 126th Street Brookfield, WI 53005 LIGHTHOUSE
Creative A LITTLE KNOWLEDGE IS A DANGEROUS THING... IMPROVE PERFORMANCE WITH OUR. COMPREHENSIVE TRAINING SERVICES Revised November 2007
T h e D e l l G r o u p, I n c. Creative s o l u t i o n s for your compliance burdens A LITTLE KNOWLEDGE IS A DANGEROUS THING... IMPROVE FORMANCE WITH OUR COMPREHENSIVE TRAINING SERVICES Revised November
Telecommunication Tower Technician Course Descriptions
Telecommunication Tower Technician Course Descriptions Developed by: TES, Inc. 10909 Murdock Drive Knoxville, TN 37932 800-327-4036 O*NET-SEC CODE: 49-2021.00 RAPIDS CODE: 2030CB Approved By US Department
Creative Solutions for your compliance burdens
The Dell Group, Inc. Creative Solutions for your compliance burdens A LITTLE KNOWLEDGE IS A DANGEROUS THING... IMPROVE FORMANCE WITH OUR COMPREHENSIVE TRAINING SERVICES Revised September 2016 TRAINING
OSHA's New Walking- Working Surfaces & Fall Protection Requirements ADELE L. ABRAMS, ESQ., CMSP LAW OFFICE OF ADELE L. ABRAMS, PC
OSHA's New Walking- Working Surfaces & Fall Protection Requirements ADELE L. ABRAMS, ESQ., CMSP LAW OFFICE OF ADELE L. ABRAMS, PC WWW.SAFETY-LAW.COM Current rules: Background Slips, trips, and falls constitute
RULES AND REGULATIONS Title 49 PROFESSIONAL AND VOCATIONAL STANDARDS
RULES AND REGULATIONS Title 49 PROFESSIONAL AND VOCATIONAL STANDARDS STATE BOARD OF LANDSCAPE ARCHITECTS [49 PA. CODE CH. 15] Corrective Amendment to 49 Pa. Code 15.12 The State Board of Landscape Architects
John Paul (JP) Jones President
John Paul (JP) Jones President of Required Training for Telecommunications Tower Workers in the USA WHAT STANDARDS AND REGULATIONS DO WE TRAIN TO? OSHA CFR 29-1926 & 1910 ANSI 490.1 ANSI Z359 ANSI 10.48
ELECTRICAL (COMPREHENSIVE) SAFETY PROGRAM REGULATORY STANDARD: OSHA - 29 CFR CFR , ,
ELECTRICAL (COMPREHENSIVE) SAFETY PROGRAM REGULATORY STANDARD: OSHA - 29 CFR 1910.331 335-29 CFR 1926.302, 1926.416, 1926.417 BASIS: The National Safety Council estimates that there are at least 300 deaths
1.0 Scope and Application
1.0 Scope and Application This policy contains safety requirements to protect employees from falls of six (6) feet or more when performing elevated work except on ladders and scaffolding (See Ladders and
There is one Fact Sheet for each module presented in the course. They are easily printed either singly or collectively.
OSHA 10 GENERAL INDUSTRY FACT SHEETS The following Fact Sheets are provided to assist the student in identifying content and learning objectives for each module presented in the training course. There
FALL PROTECTION. Supplement to Standard Training Module
0 FALL PROTECTION Supplement to Standard Training Module TRAINING REQUIREMENTS OVERVIEW This standard Vivid training module provides a general overview of Fall Protection and the use of fall protection
: Electric Power Generation, Transmission, and Distribution. Region IV - OSHA
1910.269: Electric Power Generation, Transmission, and Distribution Region IV - OSHA Scope This standard covers the operation and maintenance of electric power generation, control, transformation transmission,
Course outline: 111 WH&S E101A UEENEEE101A - Occupational Health and Safety regulations, codes and practices in the workplace
RTO Code 41319 Course outline: 111 WH&S E101A UEENEEE101A - Occupational Health and Safety regulations, codes and practices in the workplace Qualification: Applicable to: Unit of competency: Related policies:
Fall Prevention in Residential Construction FALL HAZARD AWARENESS, PREVENTION, SOLUTIONS, AND RESCUE.
Fall Prevention in Residential Construction FALL HAZARD AWARENESS, PREVENTION, SOLUTIONS, AND RESCUE. Welcome! This training is provided as a service to the residential construction industry by: jssafety.org
Walking Working Surfaces Compliance Checklist
Walking Working Surfaces Compliance Checklist Insert Company Name Insert Revision Date Walking Working Surfaces Compliance Checklist Table of Contents Background.3 General Walking Working Surfaces Requirements
Mobile Training Unit (MTU)
Mobile Training Unit (MTU) The MTU provides a convenient way of meeting training requirements by bringing a range of short duration health & safety and operative training onsite. Through the MTU, employees
OSHA Compliance Saves Money, See How They Are Connected. Ryan S. Hellman, MS Principal EHS Consultant
OSHA Compliance Saves Money, See How They Are Connected Ryan S. Hellman, MS Principal EHS Consultant Why Safety? OSHA Regulations Approximately 50 individual OSHA General & Construction Industry Standards
FCX Department of Occupational Health and Safety. Flagging and Barricading Guideline
FCX Department of Occupational Health and Safety Flagging and Barricading Guideline Approval Date: 11/12/13 Original Date: 03/30/09 SOP # FCX-19 Revision # 1 Supersedes X High Medium Task Risk Low NA Contents
Effective Date: 10-January Table of Contents
Version: 4 Page: 1 of 10 Table of Contents 1.0 Introduction... 2 1.1 Purpose... 2 1.2 Scope... 2 1.3 Definitions... 2 1.4 Responsibilities... 4 Environmental Health and Safety Office (EHSO)... 4 Directors,
1. Objective of the initiative To ensure that all employees and subcontractors are aware of the risks associated with working at height.
Safety Initiative 02 Working at Height May 2011 CONTENTS 1. Objective of the initiative 2. Overview. 3. Implementation 4. Duties 5. Hierarchy of Controls 6. Workplace Inspections 7. Fragile Surfaces 8.
Safety at Work. Rules for Staying Alive
Safety at Work Rules for Staying Alive Safety at Work Rules for Staying Alive Introduction The purpose of Dana Gas Rules For Staying Alive is to address the key causes of deaths in our industry. These
Subchapter 4. Construction Safety Orders Article 24. Fall Protection. Return to index New query
This information is provided free of charge by the Department of Industrial Relations from its web site at www.dir.ca.gov. These regulations are for the convenience of the user and no representation or
RISK CONTROL SOLUTIONS
RISK CONTROL SOLUTIONS A Service of the Michigan Municipal League Liability and Property Pool and the Michigan Municipal League Workers Compensation Fund REDUCING EXPOSURES FROM CONFINED SPACE ENTRY Over
Vehicle-mounted elevating and rotating work platforms.
Regulations (Standards - 29 CFR) Vehicle-mounted elevating and rotating work platforms. - 1910.67 Regulations (Standards - 29 CFR) - Table of Contents Part Number: 1910 Part Title: Occupational Safety
A REAL-WORLD VIEW: IMPLEMENTING NEW OSHA FALL PROTECTION REGULATIONS
A REAL-WORLD VIEW: IMPLEMENTING NEW OSHA FALL PROTECTION REGULATIONS PPSA Health & Safety Conference June 2018 THOM KRAMER, P.E., C.S.P. LJB INC. (937) 259-5020; TKRAMER@LJBINC.COM AGENDA Background/context
Walking-Working Surfaces and Fall Protection
Walking-Working Surfaces and Fall Protection This course is a basic awareness-level introduction to safe practices related to walking-working surfaces, ladders, stairs, fall protection and protection from
Working at Heights Training Checklist (Ontario Version)
Working at Heights Training Checklist (Ontario Version) The new working at heights training is different from the fall protection training required by Sec. 26.2(1) of the Ontario Construction Projects
QUALITY ASSURANCE SPECIFICATION NONDESTRUCTIVE EXAMINATION PAGE 1 OF 7
QUALITY ASSURANCE SPECIFICATION REVISION: 0 DATE: 08/29/14 NONDESTRUCTIVE EXAMINATION PAGE 1 OF 7 1.0 Purpose The purpose of this specification is to establish the minimum quality assurance requirements
workplace fatalities involving falls to a lower level. Fall related fatalities make up 16% of workplace fatalities
2013 574 workplace fatalities involving falls to a lower level Fall related fatalities make up 16% of workplace fatalities Bureau of Labor Statistics Passive Fall Prevention Fall Arrest Fall Restraint
DREW UNIVERSITY FALL PROTECTION PROCEDURE (DRAFT 12/11)
PURPOSE The objective of this policy & guideline is to eliminate the potential for injuries and fatalities to employees and contractors resulting from falls from elevated work areas at Drew University
FA L L P R O T E C T I O N P L A N N I N
FALL PROTECTION Planning Resource plan prevent protect The fall protection plan guidance you need to keep your company compliant Falls are by far one of the most common workplace hazards tracked by federal
12/22/ CHG 124 VOLUME 3 GENERAL TECHNICAL ADMINISTRATION
VOLUME 3 GENERAL TECHNICAL ADMINISTRATION CHAPTER 57 MAINTENANCE REQUIREMENTS FOR HIGH-PRESSURE CYLINDERS INSTALLED IN U.S.-REGISTERED AIRCRAFT CERTIFICATED IN ANY CATEGORY Section 1 Maintenance Requirements
Lockout/Energy Control
Lockout/Energy Control Presented By: Sotaris, LLP 2000 Auburn Drive, Suite 200 Beachwood, Ohio 44122 P: 216-378-7650 F: 866-794-5756 W: www.sotaris.com E: awj@sotaris.com 1 About Me Andrew W. Johnson,
Today s Discussion. Passive Fall Prevention. Fall Restraint. Fall Arrest. Ladders PROGRESSIVE SAFETY SERVICES LLC 2019
Today s Discussion Passive Fall Prevention Fall Restraint Fall Arrest Ladders PROGRESSIVE SAFETY SERVICES LLC 2019 2 Fall Related Incidents Approximately 20% of workplace fatalities; disabling injuries,
Sample Fall Rescue Plan for Bridge Work
This document is intended to provide guidance for developing fall rescue plans for bridge contractors. The Occupational Safety and Health Administration s (OSHA) regulation 29 CFR 1926.502(d)(20) states:
CLIMBING WALL ASSOCIATION, INC. WORK-AT-HEIGHT STANDARD FOR CLIMBING WALL FACILITIES. FIRST EDITION April 27,2017
CLIMBING WALL ASSOCIATION, INC. WORK-AT-HEIGHT STANDARD FOR CLIMBING WALL FACILITIES FIRST EDITION April 27,2017 Copyright 2017, Climbing Wall Association, Inc., All rights reserved. This document may
DEPARTMENT OF LICENSING AND REGULATORY AFFAIRS DIRECTOR'S OFFICE GENERAL INDUSTRY SAFETY STANDARDS PART 49. SLINGS
DEPARTMENT OF LICENSING AND REGULATORY AFFAIRS DIRECTOR'S OFFICE GENERAL INDUSTRY SAFETY STANDARDS (By authority conferred on the director of the department of licensing and regulatory affairs by sections
NRC WVU OSHA #500 Trainer Course in Occupational Safety & Health Standards for the Construction Industry
OSHA #500 Trainer Course in Occupational Safety & Health Standards for the Construction Industry February 6 9, 2018 March 6 9, 2018 April 24 27, 2018 May 1 4, 2018 May 15 18, 2018 Wilmington, DE May 15
SAFETY POLICY AND PROCEDURE MANUAL QUESTIONNAIRE
The following questionnaire is designed to aid us in the creation of your policy and procedure manual. Please place a checkmark in the boxes that correspond to the sections that you would like to be included
Overview of Today s Program
OSHA s New Confined Spaces In Construction Standard What You Need To Know Rod Smith rsmith@shermanhoward.com 303.299.8197 Pat Miller pmiller@shermanhoward.com 303.299.8354 Overview of Today s Program 1
Responsibilities / Accountability
Responsibilities / Accountability What we will cover Brief history of OPP safety program OPP s commitment to safety Safety responsibilities Accountability for safety Employee expectations History of Safety
ANSI A Work Zone Safety for Highway Construction. Scott Schneider, CIH and Travis Parsons Laborers Health and Safety Fund of North America
ANSI A10.47-2009 Work Zone Safety for Highway Construction Scott Schneider, CIH and Travis Parsons Laborers Health and Safety Fund of North America Agenda Introductions History Overview of the Standard
OCCUPATIONAL SAFETY AND ENVIRONMENTAL HEALTH GUIDELINE
OCCUPATIONAL SAFETY AND ENVIRONMENTAL HEALTH GUIDELINE Date: 04-22-2009 Revision: 02 Page: 1 of 6 SUMMARY: SCOPE: REFERENCE REGULATIONS: Employees using laboratory fume hoods shall observe all applicable
2.2. Anchorage Point A secure point of attachment for Lifelines, lanyards or deceleration devices.
Title: Elevated Walking/Working Surfaces (Fall Protection) Site Function: Safety Procedure No.: MC032.122 Page: 1 of 16 McIntosh Site Reviewed: 02/2013 Effective: 03/2013 Supersedes: 08/2012 Preparer:
Lockout/Tagout Manual
Manual 2408 Wanda Daley Drive Ames, Iowa 50011-3602 (515) 294-5359 www.ehs.iastate.edu Copyright Environmental Health and Safety 2809 Daley Drive Ames, IA 50011-3660 Ph: (515) 294-5359 www.ehs.iastate.edu
Title: Elevated Walking/Working Surfaces (Fall Protection)
Title: Elevated Walking/Working Surfaces (Fall Protection) McIntosh Site Function: Ecology, Health and Safety Procedure No.: MC032.122 Page: Page 1 of 16 Reviewed: 12/2017 Effective: 01/2018 Supersedes:
Written Programs Listing
Written Programs Listing Bloodborne Pathogens (BBP) (29CFR1910.1030) This standard requires that precautions be taken to prevent the transmission of bloodborne pathogens. Viruses and bacteria can be found
CHAPTER 10 FALL PROTECTION
CHAPTER 10 FALL PROTECTION A. INTRODUCTION... 1 B. CHAPTER-SPECIFIC ROLES and RESPONSIBILITIES... 2 C. HAZARD IDENTIFICATION... 3 1. Job Hazard Analysis (Jha).... 3 2. Fall Hazards... 3 D. HAZARD CONTROL...
Harley-Davidson Motor Company
Harley-Davidson Motor Company Standardized Contractor Safety Pre-Qualification Form (SCSPF) Complete and email this form to the appropriate facility by clicking on the location below: Arizona Proving Grounds
Fall Protection for General Industry and Construction. Josh Flesher Assistant Regional Administrator for Cooperative and State Programs
Fall Protection for General Industry and Construction Josh Flesher Assistant Regional Administrator for Cooperative and State Programs Workplace Injuries, Illnesses and Fatalities 4,585 workers were killed
OSHACAMPUS.com TM. powered by 360training. Course Catalog
Course Catalog General Industry Safety Product Catalog General Industry Courses: Advanced Advanced level courses are for Safety Managers and Compliance Officers. They are focused on the compliance aspects
James J Arendas Ph.D.
James J Arendas Ph.D. Safety Program Elements Management Commitment Hazard Identification Hazard Correction Training Hazard Identification Qualified and Competent Persons Identify Hazards in the Workplace
FALL PROTECTION / ELEVATED WORK
SEPTEMBER CORE REFRESHER HSE TOOL BOX FALL PROTECTION / ELEVATED WORK FALL PROTECTION Falls from elevations are one of the most common causes of death in this industry. OSHA requires fall protection when
What standards apply to rooftop fall protections systems?
What standards apply to rooftop fall protections systems? For a number of years, the standards governing the design, installation, use and inspection of fixed fall protection systems have been vague at
Department of the Interior Departmental Manual
Department of the Interior Departmental Manual Effective Date: 3/12/99 Series: Safety Management Part 485: Safety and Occupational Health Program Chapter 27: Underwater Diving Safety Originating Office:
Control of Hazardous Energy Lockout / Tagout Program
Control of Hazardous Energy Lockout / Tagout Program August 2016 Table of Contents Purpose... 1 Scope and Application... 1 Responsibilities... 1 Environmental Health and Safety Personnel (EH&S)... 1 Directors
Mid-Del Technology Center s Health, Safety & Environmental (HS&E) Training Center
Mid-Del Technology Center s Health, Safety & Environmental (HS&E) Training Center Mid-Del Technology Center provides a wide variety of customized safety and health training. This training can be conducted