SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection

Size: px

Start display at page:

Download "SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection"

Andrea Franklin
5 years ago
Views:

SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 07-8 mm - pad mounting body M connection x/ - / - / Series 0 ISO 07- (8 mm) FEATURES M connection on top of valve:

1 SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 07-8 mm - pad mounting body M connection x/ - / - / Series 0 ISO 07- (8 mm) FEATURES M connection on top of valve: reduces installation time, wiring costs and prevents wiring errors Modular assembly with joinable subbases Spool & Sleeve or rubber packed technology in the same dimension body High flow rate up to 00 l/min Internal or external pilot pressure supply capability and compliance with ISO standard 07-8 mm Spool & sleeve technology for long service life, rubber-packed version for high flow combined with multi-functions GENERAL Operating pressure See «SPECIFICATIONS» [ bar =00 kpa] Ambient temperature range (TS) -0 C to +0 C Rated flow See «SPECIFICATIONS» conforming to ISO 68 C (/) =, x 0-9 m /s.pa (sonic conductance) b (/) = 0,8 (critical pressure ratio) Pneumatic base ISO 07-6 mm (M on the top) Connection Single or manifold base Response time See «SPECIFICATIONS» fluids ( ) temperature range (TS) technology seal materials ( ) air or inert gas ISO 87 Level C to +0 C rubber packed NBR (nitrile) + PUR (polyurethane) -0 C to +0 C spool & sleeve metal-to-metal sealing 06GB-07/R0 CONSTRUCTION MATERIALS IN CONTACT WITH FLUID ( ) Ensure that the compatibility of the fluids in contact with the materials is verified Body Aluminium, E-coating treatment Spool Aluminium or st. steel (spool & sleeve) Piston POM (rubber packed) Spring Steel Other seals NBR Other materials PA (polyamide) GF 0% (glass fiber reinforced) Subbases Aluminium, E-coating treatment ELECTRICAL CHARACTERISTICS Coil insulation class F Round connector x pin M male, IEC PIN assignment ISO 00 Electrical safety IEC-EN / IEC-EN Electrical enclosure protection IP6 (EN 609) Standard voltages DC (=) : V Power ratings (hot / cold) (=), W /, W M (ISO 00) ACCESSORIES Straight M connector female Sandwich kits Pressure regulator not used not used common, 0 V supply, coil not used supply, coil common, 0 V supply, coil With m cable length ( pin): catalogue number 880 Shut off, pressure block, exhaust block, etc. (See following pages) See following pages M on the top Fielbus Electronics - 9

2 SPOOL VALVES SERIES 0 PRESENTATION Internal/external pilot supply Exhaust protector Left end plate Base manifold gasket Joinable subbase (Manifold base) (one manifold base for stations valve) Screw with washer 6 Right end plate 7 Internal supply configuration (standard supply) 8 End plate modification for external supply 9 Valve with M connection on the top 0 Valve gasket Blank station plate kit Blocking disc kit 60 - Fielbus Electronics 7 6 Speed control kit Sandwich shut off (sandwich pressure block or sandwich exhaust block available) Double regulator 6 Single subbase 7 Label (see page 9) 06GB-07/R0 single subbase

3 SPOOL VALVES SERIES 0 SPECIFICATIONS function x / NC symbol pilot () return () rated flow at 6, bar P bar l/min (ANR) pilot pressure operating pressure port dimensions / type () -DIGIT PRODUCT CODE response time (bar) open / closed at C (bar) max. (PS) min. air ( ) (ms) min. max. = ISO 07- SPOOL VALVE, RUBBER PACKED TECHNOLOGY, WITH IMPULSE MANUAL OPERATOR 0 0 SPECIFICATIONS function spring return symbol pilot () return () 8 () / rated flow at 6, bar P bar l/min (ANR) R0ABD0N8BF - (c) - (c) () (c) (0) (c) 0 (R0ABD0N8PF) (c) pilot pressure operating pressure port dimensions / type () -DIGIT PRODUCT CODE response time (bar) open / closed at C (bar) max. (PS) min. air ( ) (ms) min. max. = ISO 07- SPOOL VALVE, SPOOL AND SLEEVE TECHNOLOGY, WITH IMPULSE MANUAL OPERATOR 8 () spring / 9 0-0,9 0 0 R0AB0N8BF (R0AB0N8PF) (c) / 8 () differential return 0 90 / 6, 0-0,9 0 0 R0ABN0N8BF (R0ABN0N8PF) (c) solenoid air 8 () / 6 0-0,9 0 0 R0AB0N8BF (R0AB0N8PF) (c) 06GB-07/R0 / 8 () W closed centre position 8 () W centre open to pressure 8 () W centre open to exhaust () For dimensions, see drawing(s) for each construction type on the following page(s). (c) Internal piloting (internal supply). ( ) Ensure that the compatibility of the fluids in contact with the materials is verified /, 0-0, /, 0-0, /, 0-0,9 0 0 R0AB60N8BF (R0AB60N8PF) (c) R0AB70N8BF (R0AB70N8PF) (c) R0AB0N8BF (R0AB0N8PF) (c) Fielbus Electronics - 6

4 Thread connection R = Pad mount How to Order Valves -DIGIT PRODUCT CODE R 0 A B N 0 N A00 F Voltage - class F = V DC - class F SPOOL VALVES SERIES 0 Product series Options 0 (8 mm valve) M valves (External piloting) () A00 = Standard (No option) With impulse manual operator Revision letter B = With maintained manual operator A = Initial release M = Without manual operator B = Internal pilot supply from port Actuation 8B = 0 b max. pressure - non UL certified = Spool and sleeve 8G = B + B = Rubber packed (x/ NC, only) 8M = B + 8B 8N = M + 8B Valve type 8K = M + B B = Solenoid pilot 8P = B + 8B (With impulse manual operator) 69N = B + M + 8B 69P = B + B + 8B Function D = x/ NC, dual -way (Rubber packed) Electrical interface N = /, Differential air return N = M connector (on top of the valve) = /, spring return () Single subbases: = /, solenoid air return = /, W, open center to exhaust 6 = /, W, center closed 7 = /, W, open center to pressure Configurator - CAD Files Used external spool valve ( single subbases, internal or external supply). Joinable subbase (manifold base): Used external spool valves (internal/external supply configurated in the end plate kits). For internal piloting, contact us. 6 - Fielbus Electronics 06GB-07/R0

SPOOL VALVES SERIES 0 INSTALLATION The spool valves can be mounted in any position without affecting operation Spool valve supplied with mounting screws and mounting pad gasket ISO 07- pneumatic pad

5 SPOOL VALVES SERIES 0 INSTALLATION The spool valves can be mounted in any position without affecting operation Spool valve supplied with mounting screws and mounting pad gasket ISO 07- pneumatic pad mounting body DIMENSIONS (mm), WEIGHT (kg) TYPE 0 Electrical interface N ISO 00 / ISO 07- IP6 Configurator - CAD Files 7 Mx , 9, type weight Manual operator location LED indicator 0 0,7 06GB-07/R0 Fielbus Electronics - 6

6 HOW TO ORDER SINGLE AND JOINABLE SUBBASES (See following pages) -DIGIT PRODUCT CODE G 0 A M V 0 A00 0 Thread connection Not use G = ISO 8/ 8 = NPT (contact us) Interface K = Push-in connectors () = ISO 07- SPOOL VALVES SERIES 0 Configurator - CAD Files Product series Options 0 A00 = Standard (internal pilot) X = External pilot supply from port Revision letter A = Initial release Product type Wiring option A = Single subbase 0 = Non-plug-in M = Joinable subbase (manifold base) Mounting Port connection A = Single subbase = /8 (joinable base) V = Joinable subbase, stations, side ports = / (single subbase) F = 6 x 8 mm (push-in connector only) () () Joinable subbase only H = 8 x 0 mm (push-in connector only) () 6 - Fielbus Electronics 06GB-07/R0

SPOOL VALVES SERIES 0 SINGLE SUBBASES (see following page for details) M SPOOL VALVE + SINGLE SUBBASE ISO 07- SINGLE SUBBASES function designation thread type dimensions / type () SINGLE SUBBASE (ISO

7 SPOOL VALVES SERIES 0 SINGLE SUBBASES (see following page for details) M SPOOL VALVE + SINGLE SUBBASE ISO 07- SINGLE SUBBASES function designation thread type dimensions / type () SINGLE SUBBASE (ISO 07-) FOR M ON THE TOP VALVE -DIGIT PRODUCT CODE () () () () () () internal supply ---- = / = /8 (pilot exhaust) G 0 G0AAA0A000 () () () () () () () external supply ---- = / = /8 (pilot exhaust) = /8 (pilot external supply) G 0 G0AAA0X0 () For dimensions, see drawing(s) for each construction type on the following page(s). 06GB-07/R0 Fielbus Electronics - 6

SPOOL VALVES SERIES 0 JOINABLE SUBBASES (see following page for details) M SPOOL VALVE + JOINABLE SUBBASE

.. JOINABLE SUBBASE (MANIFOLD BASE) function designation thread type dimensions / type () DOUBLE JOINABLE

ports, x /8 G 0 G0AMV0A000 END PLATE KITS horizontal supply x /8 (// ports) x /8 (/ ports) () For

8 SPOOL VALVES SERIES 0 JOINABLE SUBBASES (see following page for details) M SPOOL VALVE + JOINABLE SUBBASE ISO 07- (one subbase for stations valves) Accessories: pressure regulator, speed control,... JOINABLE SUBBASE (MANIFOLD BASE) function designation thread type dimensions / type () DOUBLE JOINABLE SUBBASE (ISO 07-) FOR M ON THE TOP VALVE -DIGIT PRODUCT CODE one manifold base for stations valve side ports, x /8 G 0 G0AMV0A000 END PLATE KITS horizontal supply x /8 (// ports) x /8 (/ ports) () For dimensions, see drawing(s) for each construction type on the following page(s) Fielbus Electronics G 0 G0AK GB-07/R0

SPOOL VALVES SERIES 0 SANDWICH SHUT OFF KIT thread type dimensions / type () ACCESSORIES CODE ()()() ()() ()() ()()() () () ()() Used to shut-off pressure to the valve which is mounted above it

The valve should not be energised during disassembly Always internal piloting - 0 R0AY06700 SANDWICH PRESSURE BLOCK KIT ()() () () () () () Used to supply a separate pressure to P() a single valve

9 SPOOL VALVES SERIES 0 SANDWICH SHUT OFF KIT thread type dimensions / type () ACCESSORIES CODE ()()() ()() ()() ()()() () () ()() Used to shut-off pressure to the valve which is mounted above it Allows easy maintenance without the need to shut-off pressure to the whole manifold (specified for x/ NC-NC valve)! Pay attention to residual pressures! The valve should not be energised during disassembly Always internal piloting - 0 R0AY06700 SANDWICH PRESSURE BLOCK KIT ()() () () () () () Used to supply a separate pressure to P() a single valve station without needing blocking disc G 0 G0AW06700 ()() () () () () () SANDWICH EXHAUST BLOCK KIT ()() () () () ()() () () ()() () () () ()() Used to isolate the exhaust of the single valve station from the manifold base Allows faster exhaust response by rerouting G 06 G0AX06700 SANDWICH SPEED CONTROL KIT () () () () () () () Used to control double acting cylinder speed by restricting exhaust flow ( & ) - 08 R0AS GB-07/R BLANK STATION PLATE KIT () ()() () ()() () BLOCKING DISCS KIT + Port Used to block off a manifold station block for future use - 07 P0AB800 P0AD900 + Port P0AD900 + Port P0AD900 + Ports and P0AD Ports and P0AD900 + Ports and P0AD Ports, and P0AD9007 () For dimensions, see drawing(s) for each construction type on the following page(s). Fielbus Electronics - 67

type PRESSURE REGULATOR dimensions / type () SPOOL VALVES SERIES 0 ACCESSORIES CODE (pressure range 0,7 to 9 bar) 09 R0ARS0A000 0 R0ARD06P0 R0ARD06N0 R0ARD0A000 R0ARE06P00 R0ARE06N00 R0ARE0A0000 0

HOW TO ORDER (PRESSURE REGULATOR) R 0 A -DIGIT PRODUCT CODE R 0 - Thread connection R = Pad mount Configurator - CAD Files - 0 Not used Interface = ISO 07-0 = No interface Product series 0 Revision

10 type PRESSURE REGULATOR dimensions / type () SPOOL VALVES SERIES 0 ACCESSORIES CODE (pressure range 0,7 to 9 bar) 09 R0ARS0A000 0 R0ARD06P0 R0ARD06N0 R0ARD0A000 R0ARE06P00 R0ARE06N00 R0ARE0A R0ART06P0 R0ART06N0 R0ART0A000 RS...RS...A00. RD...RD...6P.....RD...6N.....RD...A00.. RE...RE...6P.....RE...6N.....RE...A00.. RT...RT...6P.....RT...6N.....RT...A00.. For dimensions, see drawing(s) for each construction type on the following page(s). HOW TO ORDER (PRESSURE REGULATOR) R 0 A -DIGIT PRODUCT CODE R 0 - Thread connection R = Pad mount Configurator - CAD Files - 0 Not used Interface = ISO 07-0 = No interface Product series 0 Revision letter A = Initial release A00 = Standard (no options) Options 6N = Jumper on end 6P = Jumper on end Product type R = Pressure regulator Wiring option 0 = Non-Plug-in Regulator type S = Single regulator - Pressure to port Gauge type = bar (standard) D = Single or double regulator - Pressure to ports & E = Single or double regulator -External outlet regulator T = Single or double regulator - Two-pressure selector used for multi-pressure applications 68 - Fielbus Electronics Pressure range = 0,7 to 0 bar = 0, to bar = 0, to bar 06GB-07/R0 ()

11 SPOOL VALVES SERIES 0 DIMENSIONS (mm), WEIGHT (kg) TYPE 0 Single subbases ISO 07- (M on the top) /8 =,,,, ports /8 =, ports G0AAA0A000 - G0AAA0X0 Configurator - CAD Files 8 0 0, 0, , 7,9 / (x) Ø,7 (x) 6,,7 / (x) 7,9 0,7 7,7 7,9,8 6, 0, /8 (x) 06GB-07/R0 type code weight 0 G0AAA0A000 0,98 G0AAA0X0 0,9 6,9 9,8 weight (kg) 0,7 Fielbus Electronics - 69

SPOOL VALVES SERIES 0 DIMENSIONS (mm), WEIGHT (kg) TYPE 0 Joinable subbase (manifold base),

(end plate kits) Configurator - CAD Files 7 7, 66, x /8 7, 0, 7 9 7, 7, 7, 9 9 7, 7, 7,,8 7,

(piloting), 8,6, 9,6 Internal supply (factory setting) type code weight External supply

12 SPOOL VALVES SERIES 0 DIMENSIONS (mm), WEIGHT (kg) TYPE 0 Joinable subbase (manifold base), horizontal supply ISO 07- x / = and ports (dual subbase) x / =,, ports; x /8 = and ports (end plate kits) Configurator - CAD Files 7 7, 66, x /8 7, 0, 7 9 7, 7, 7, 9 9 7, 7, 7,,8 7, Nx x /8 x Ø, x /8 8,6 9,6,, End plates adaptation for internal/external supply (piloting), 8,6, 9,6 Internal supply (factory setting) type code weight External supply configuration G0AMV0A000 () 0, 0 G0AK7800 0, () For stations Fielbus Electronics weight (kg), 06GB-07/R0

13 SPOOL VALVES SERIES 0 DIMENSIONS (mm), WEIGHT (kg) TYPE 0 Sandwich shut off ISO 07- TYPE 0 Sandwich pressure block ISO 07- R0AY90900 G0AW , 8, 7,60 7, 9, 76, /8 6, 6, TYPE 06 Sandwich exhaust block ISO 07- TYPE 07 Blank station plate kit ISO 07- G0AX86800 P0AB800 8, 8, 7, 76, /8 68 R0AS9900, TYPE 08 Speed control ISO 07-0 R0ARS0A000 TYPE 09 Single regulator RS type ISO 07-8, 06GB-07/R0 type weight 0 0, 0 0,8 06 0, 07 0, , () () Incl. gauge(s). 7 7,,6 9, 8,,6 7, Fielbus Electronics - 7

14 SPOOL VALVES SERIE 0 DIMENSIONS (mm), WEIGHT (kg) TYPE - Double regulator ISO 07-,6,6 7, 7, R0ARE0A0000 R0ARD0A000 / R0ARD0A000 9,6 8, 9,6 6, 8, 6, TYPE Single regulator ISO 07-7,,6,6 7, R0ARD06N0 / R0ART06N0 R0ARD06P0 / R0ART06P0 8, 9, 9,6 9, type weight () - () - () - () Incl. gauge(s). 7 - Fielbus Electronics,6 7,,6 8,,6 7, R0ARE06N00 R0ARE06P00 () 9, 8, 9,6 9, 06GB-07/R0 8,,6

Pneumatic valve islands

Pneumatic valve islands The MEGA solenoid air operated spool valve JOUCOMATIC offers a concept of solenoid air operated spool valves which can be fitted together to form islands. Due to its new patented