Mark 630 Series. High Pressure Regulators Mark 630 High Pressure Regulators. High Pressure Regulators. Features
|
|
|
- Laurence Stone
- 5 years ago
- Views:
Transcription
1 Mark 630 Series High Pressure Regulators The Jordan Mark 630 self-operated pressure reducing regulator is designed to provide tight shutoff and accurate regulation on high pressure gas systems. It can be used on air and a variety of gases. It is designed to handle inlet pressures up to 1500 psi. Features Inlet pressures to 1500 psi (103,4 bar) Tight shutoff Easy maintenance Rugged design Multiple orifice sizes, brass or stainless steel NACE compatible option Specifications Sizes: 1" (DN25) and 2" (DN50) End Connections: FNPT (contact factory for other options) Materials: Body: 1" Carbon Steel (WCB A216), 2" Ductile Iron Seat: Brass or 316 Stainless Steel (CF8M) Disc Assembly: Brass / TFE, 316 / TFE Diaphragm: Neoprene, Viton Spring Housing: Steel Service: Air or gas Temperature Range: -20 F to 150 F (-28,9 C to 65,6 C) Maximum : 1500 psi (103,4 bar) Reduced Pressure Control Range: psig (1,86-3,45 bar) psig (3,17-6,55 bar) psig (6,21-10,34 bar) psig (10,34-13,79 bar) psig (13,79-19,0 bar) psig (19,0-34,5 bar) Orifice Sizes (interchangeable): 1/8" (3mm), 3/16" (5mm), 1/4" (6mm), 3/8" (10mm), 1/2" (13mm) Table 1: Max s and Pressure Drops Port Diameter 1/8" 1/4" 3/8" 1/2" Max Allowable, psig (1) Max Allowable Pressure Drop, psid The sum of the outlet pressure setting and the maximum allowable pressure drop determines the maximum allowable inlet pressure for a given installation. For example, with a 3/8" seat ring orifice (maximum pressure drop of 500 psi) and a 275 psig outlet pressure setting, the maximum inlet pressure is 775 psig (500 psi psig). Table 2: Ranges Range Maximum over Pressure Setting (1), psig Maximum Emergency Outlet (Casing) Pressure, psig Jordan Valve, a division of Richards Industries 3170 Wasson Road Cincinnati, OH (f) info@richardsind.com (2) 1. Internal parts of the regulator may be damaged if the outlet pressure exceeds the pressure setting beyond the amounts shown. 2. This applies to outlet pressure settings below 350 psig only. For pressure settings above 350 psig, outlet pressure is limited to 550 psig, the maximum emergency outlet (casing) pressure. High Pressure Regulators Mark 630 High Pressure Regulators
2 Table 3: High Pressure Regulator Flow Capacities (scfh of 0.6 Specific Gravity Natural Gas; based on 20% Droop) Range, psig To determine the equivalent capacities for other gases, multiply table value by for air; for nitrogen; for propane; for butane.
3 Table 3: High Pressure Regulator Flow Capacities (scfh of 0.6 Specific Gravity Natural Gas; based on 20% Droop) (Cont'd) Range, To determine the equivalent capacities for other gases, multiply table value by for air; for nitrogen; for propane; for butane. -3-
4 Table 3: High Pressure Regulator Flow Capacities (scfh of 0.6 Specific Gravity Natural Gas; based on 20% Droop) (Cont'd) Range, psig Outlet Pressure To determine the equivalent capacities for other gases, multiply table value by for air; for nitrogen; for propane; for butane. -4-
5 Table 3: High Pressure Regulator Flow Capacities (scfh of 0.6 Specific Gravity Natural Gas; based on 20% Droop) (Cont'd) Range, Outlet Pressure To determine the equivalent capacities for other gases, multiply table value by for air; for nitrogen; for propane; for butane. Dimensional Data General Dimensions Size A B C D 1" 7 3 / / / /8 2" 7 7 / / /16 D C 4.69 A B 1" Outlet Overpressure Protection As is true with many regulators, the Mark 630 Series regulator has an outlet pressure rating that is lower than the inlet pressure rating. Overpressure protection is needed to avoid overpressure if the actual inlet pressure can exceed the outlet pressure rating. -5-
6 MK630/0910/5K/AB Ordering Schematic To specify a MK630 High Pressure Regulator, build a model number by making a selection from each category in the product Designator Coding System below. Model # Size / Model 630 Model Size 100 1" 2" 1 & 2 Body Material CS Carbon Steel (1" only) DI Ductile Iron (2" only) 4 Options S Standard Unit N NACE O Other (Specify) 5 & 6 Seat Ring Orifice 12 1/8" 18 3/16" 25 1/4" 38 3/8" 50 1/2" 3 Range 1 27 to 50 psig 2 46 to 95 psig 3 90 to 150 psig to psig 5 to 275 psig to 500 psig 7 Trim Material B Brass SS* * SS option meets NACE requirements. When ordering, use the "N" designation. Jordan Valve, a division of Richards Industries 3170 Wasson Road Cincinnati, OH (f) info@richardsind.com
Mark 695 Series . JORDANVALVE. Piloted Tank Blanketing Regulator 3/4"- 1"
Mark 695 Series Piloted Tank Blanketing Regulator 3/4"- 1" The Mark 695 Series piloted soft seat regulator was designed specifically to provide accurate pressure control on very low pressure tank blanketing
1805 Series Relief Valves
October 2011 1805 Series Relief Valves P1026 1805G Type 1805-2 Type 1805-4 Figure 1. Typical 1805 Relief Valves Introduction The 1805 Series relief valves are designed for use in farm tap applications
2.0 INSTALLATION & SERVICE
Installation, Operation, and Maintenance Instructions MODEL 5600 / 5600R January 2005 CONTENTS 1.0 GENERAL 1.1 5600 Model Number Information -----------------------------------------------------------------------
Noth American 7347 High Pressure Gas Regulators
Combustion Noth American 7347 High Pressure Gas s Bulletin 7347 7347 s reduce high gas supply pressures to practical use levels. Since capacities will vary with the pressure drop across the regulator (see
Models 461-S, 461-8S and S Regulators. R-1330 Rev. 7
Models 461-S, 461-8S and 461-12S Regulators R-1330 Rev. 7 461-S, 461-8S and 461-12S Regulators The Sensus Models 461-S, 461-8S and 461-12S are balanced valve, spring type regulators designed for distribution
Mark 958 Series Sanitary Gas Back Pressure Regulators
Mark 958 Series Sanitary Gas Back Pressure Regulators (3/4" - 1") The Mark 958 Sanitary Gas Back Pressure Regulator is the ideal valve for low back pressure gas regulation for blanketing, motive force,
PRO-50 Instrument Supply Regulator
Features CRN Approved The PRO-50 Regulator has been granted a Canadian Registration Number. Sour Service Capability Available in NACE configurations that comply with NACE MR0175/MR0103. Environmental limits
Cash Valve TYPE KP PILOT OPERATED BACK PRESSURE VALVE. ISSUED - DECEMBER 2000 CAVMC-0518-US-0208 ISO 9001 Certified
Cash Valve PILOT OPERATED BACK PRESSURE VALVE ISSUED - DECEMBER 2000 CAVMC-0518-US-0208 ISO 01 Certified KP HIGH CAPACITY PILOT OPERATED BACK PRESSURE VALVE DESCRIPTION The Cash Valve Type KP is a pilot
CASH VALVE TYPE KP BACK PRESSURE VALVES
A high capacity pilot operated back pressure valve that offers accurate control and dependable protection against overpressure conditions FEATURES Automatically maintains maximum pressure in a vessel or
Mark 608. Gas Pressure Regulators. Pressure Regulators Mark 608 Gas Pressure Regulators SPECIFICATIONS (3/4-1-1/4 ) FEATURES 3/4-1-1/4
Mark Gas Pressure Regulators 3/4-1-1/4 The MK Gas Pressure Regulator is the ideal valve for low pressure gas regulation. The self-contained low pressure gas regulator is for use on tank blanketing, gas
T208VR Series Tank Blanketing Vacuum Regulator
February 2014 T208VR Series Tank Blanketing Vacuum Regulator Figure 1. Typical T208VR Series Vacuum Regulator Introduction The T208VR Series direct-operated vacuum regulators are used where a decrease
The Shand & Jurs Model Vapor Guard Tank Blanketing Valve
Lower maintenance due to fewer parts Occupies less space, less stress to tank Teflon is inert to most chemicals; extends service life Simplifies and lowers maintenance cost Optimizes flow of blanketing
Type 310A-32A Pressure Reducing Regulator and Type 310A-32A-32A Working Monitor Regulator
January 2009 Type 310A-32A Pressure Reducing Regulator and Type 310A-32A-32A Working Monitor Regulator Introduction The Type 310A pilot-operated high-pressure regulator (Figure 1) is used where high capacity
Types 1098-EGR and 1098H-EGR Pressure Reducing Regulators
Types 1098-EGR and 1098H-EGR Pressure Reducing Regulators July 2008 Differential as low as 1 psid (70 mbar d) Materials of Construction Compatible with Below Grade Installations Quick Change Trim Package
Mark 60 Series. Pressure Regulators Mark 60 Pressure Regulators. Self Operated Pressure Regulators. CRN Registration Number Available
Mark 60 Series Self Operated Pressure Regulators The Mark 60 Sliding Gate Pressure Regulator is used to regulate the downstream pressure to a predetermined setpoint. The spring in the Mark 60 holds the
Maximum Pressure Differential and Maximum Inlet Pressure for Various Soft-Seated Valve Materials* Introduction. Body Pressure Ratings
BR-G-REG-13-30-03-02-A* 461-S, 461-8S and 461-12S Regulators Brochure Introduction The Sensus Models 461-S, 461-8S and 461-12S are balanced valve, spring type regulators designed for distribution and industrial
Mark 958 Series (3/4" - 1") Sanitary Gas Back Pressure Regulators
Mark 958 Series Sanitary Gas Back Pressure Regulators (3/4" - 1") The Mark 958 Sanitary Gas Back Pressure Regulator is the ideal valve for low back pressure gas regulation for blanketing, motive force,
66 Series Direct-Operated Regulators and Vacuum Service Equipment
66 Series Direct-Operated Regulators and Vacuum Service Equipment November W193/IL Figure 1. Exterior of Type 66 or 66Z Regulator Introduction Fisher 66 Series direct-operated pressure-reducing regulators
Series 100 Slam Shut Valve. Technical Bulletin
Series 100 Slam Shut Valve Technical Bulletin 02 Elster The Series 100 Slam Shut protects gas installations against overpressure conditions by automatically shutting off the gas flow. General Information
Type EZH Relief or Backpressure Regulator
Bulletin 71.4 D103574X012 Type EZH December 2017 Type EZH Relief or Backpressure Regulator P1668 Figure 1. Type EZH Relief Valve or Backpressure Regulator Features Bubble Tight Shutoff A knife-edged metal
Types 1098-EGR and 1098H-EGR Pressure Reducing Regulators
Types 1098-EGR and 1098H-EGR Pressure Reducing Regulators January 2016 Differential as low as 1 psi / 70 mbar Materials of Construction Compatible with Below Grade Installations Quick Change Trim Package
Gas Pressure Regulator HON 270 MK2
Gas Pressure Regulator HON 270 MK2 PRODUCT INFORMATION Serving the Gas Industry Worldwide Introduction, Application, Features & Technical Data Introduction The HON 270 MK2 regulator is a direct acting,
Type R622 Pressure Reducing Regulator
Type R622 Pressure Reducing Regulator June 2010 Compact Design Protective Inlet Screen High Capacity Internal Relief Light Weight W8806 Inlet and Outlet Pressure Gauge Taps Figure 1. Type R622 Pressure
Model 141-A Field Regulator. R-1311 Rev. 9
Model 4-A Field Regulator R-3 Rev. 9 4-A Field Regulator The 4-A Field Regulator is for high pressure work such as feeding intermediate and small volume loads from gas transmission lines. Use this field
299H Series Pressure Reducing Regulators
September 12 299H Series Pressure Reducing Regulators Inlet Pressure up to psig / 1 bar Compact ±1% Accuracy for Fixed Factor Billing (PFM) Rugged Construction Integral Pilot Easy to Maintain W713 Figure
Y692VB Series Vacuum Breaker
Y692VB Series Vacuum Breaker Bulletin 71.3:Y692VB June 2009 W7429 Figure 1. Type Y692VB Vacuum Breaker Introduction The Y692VB Series direct-operated vacuum breakers are used for the precise control of
Type 299 Pressure Reducing Regulators
Type 299 Pressure Reducing Regulators Fisher, Fisher-Rosemount, and Managing The Process Better are marks owned by Fisher Controls International, Inc. or Fisher-Rosemount Systems, Inc. All other marks
1301 Series High-Pressure Regulators
1301 Series High-Pressure Regulators ulletin 71.1:1301 November 2011 CONTROL SPRING DIAPHRAGM DISK HOLDER E SPARE DISK VALVE DISK P1025 Figure 1. Type 1301F Regulator Features Durable Stainless Steel Diaphragm
Type 1190 Low-Pressure Gas Blanketing Regulator
April 202 Type 90 Low-Pressure Gas Blanketing Regulator W7428 Figure. Type 90 Low-Pressure Gas Blanketing Regulator Introduction The Type 90 low-pressure gas blanketing regulator is used for extremely
Type EZL Pressure Reducing Regulator for Low Differential Pressure Applications
Bulletin 71.2 D1092X012 Type EZL October 2017 Type EZL Pressure Reducing Regulator for Low Differential Pressure Applications W8962_1 Figure 1. Type EZL Pressure Reducing Regulator Features Low Differential
Type 63EG Relief Valve or Backpressure Regulator
July 11 Type 63EG Relief Valve or Backpressure Regulator W6955 NACE Construction Backpressure Regulator Relief Valve Oxygen Service Natural Gas Liquids Figure 1. Type 63EG Fast Pilot Reseat Low Buildup
Cash Valve TYPE G-4 PILOT OPERATED PRESSURE REDUCING REGULATOR FOR STEAM, AIR AND GASES. ISSUED - MARCH 2001 CAVMC-0512-US-0208 ISO 9001 Certified
Cash Valve TYPE G-4 PILOT OPERATED PRESSURE REDUCING REGULATOR FOR STEAM, AIR AND GASES ISSUED - MARCH 2001 CAVMC-0512-US-0208 ISO 9001 Certified TYPE G-4 DESCRIPTION FIG 2042 - Bronze FIG 2043 - Bronze
Type 99 Pressure Reducing Regulators
Type 99 Pressure Reducing Regulators Bulletin 71.2:99 July 2008 W6527 W2676 D100138X012 www.emersonprocess.com/regulators Features Wide Variety of Applications Natural gas distribution systems, gas supply
S300 Series. Valve Link. Features. Fisher Controls
S0 Series Self-Operated Type VL FIELDVUE Regulators Valve Link Fisher Controls May 198 Bulletin 71.1:S0 The S0 Series self-operated, spring-loaded regulators are used for pressure-reducing control in a
JR Series. Gas Pressure Reducing Valves. a division of Jordan Valve GAS PRESSURE REDUCING VALVES
a division of Jordan Valve JR Series Gas Pressure Reducing Valves GAS PRESSURE REDUCING VALVES The LowFlow JR Series line of high pressure regulators have the ability to handle very high pressures and
RR 16 Commercial & Industrial Regulator
RR 16 Commercial & Industrial Regulator The RR 16 regulator is designed for industrial use: gas supply networks, district stations, industries, heating plants, as well as for all installations where accurate
RR 16 Commercial & Industrial Regulator
Gas RR 16 Commercial & Industrial Regulator Applications The RR 16 regulator is designed for industrial use: gas supply networks, district stations, industries, heating plants, as well as for all installations
B34 Series Regulator Commercial and Industrial Regulator
B34 Series Regulator Commercial and Industrial Regulator Appropriate for many commercial and industrial uses such as gas engines, burners, furnaces and boilers. The rapid response of the B34 is particularly
North American 7339 High Pressure Gas Regulators
Combustion North American 7339 High Pressure Gas Regulators Bulletin 7339 7339 Regulators reduce high gas supply pressures to practical use levels. Since capacities will vary with the pressure drop across
Types 627W and 627WH Direct-Operated Pressure Reducing Liquid Regulators
Types 627W and 627WH Direct-Operated Pressure Reducing Liquid Regulators Introduction The Types 627W and 627WH are direct-operated pressure reducing regulators for liquid service. They are available in
Type 1098-EGR. Pilot-Operated Valve Link Regulators. Features. Fisher Controls
Type 1098-EGR and Type 1098H-EGR VL1000 FIELDVUE Pilot-Operated Valve Link Regulators Fisher Controls January 1982 Bulletin The Type 1098-EGR and Type 1098H-EGR regulators (figure 1) provide economical
JR Series. Gas Pressure Reducing Valve GAS PRESSURE REDUCING VALVE
JR Series Gas Pressure Reducing Valve GAS PRESSURE REDUCING VALVE The LowFlow JR Series line of high pressure regulators have the ability to handle very high pressures and very low flows. These valves
627 Series Pressure Reducing Regulators
627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated pressure reducing regulators (Figure 1) are for low and high-pressure systems. These regulators can be used with natural
Model 1800 PFM Series Regulator. Technical Bulletin
Model 0 PFM Series Regulator Technical Bulletin Model 0 PFM Series Regulator 0 Elster American Meter The 0 PFM Series regulators are designed to control natural gas, air, nitrogen, carbon dioxide, propane
Cash Valve. Type G-4. Pilot Operated Pressure Reducing Regulator for Steam, Air and Gases. Flow Control
Cash Valve Type G-4 Pilot Operated Pressure Reducing Regulator for Steam, Air and Gases Issued - March 2001 CAVMC-0512-US-0609 ISO 9001 Certified Flow Control Description FIG 2042 - Bronze FIG 2043 - Bronze
MEGR-1627 Instruction Manual
MEGR-1627 HIGH FLOW GAS REGULATOR Instruction Manual- Look Inside For: Description Installation Remote Vent Line Installations Startup and Adjustment Shutdown Maintenance Body Maintenance Procedures Diaphragm
299H Series. 1% Accuracy for Fixed Factor Billing (PFM) I nlet Pressure up to 175 psig / 12.1 bar. Rugged Construction. Compact.
Bulletin 71. D3X01 99H Series May 18 99H Series Pressure ucing Regulators I nlet Pressure up to psig / bar Compact Integral Pilot Figure 1. 99H Series Pressure ucing Regulators High Capacity Robust O utlet
Choosing the right miniature instrument and control valve is a snap
Choosing the right miniature instrument and control valve is a snap INVALCO Micro Valve The Micro Valve is a unique miniature valve offering versatility and rugged construction. Since its introduction
Type Cronos Pressure Reducing Regulator
Type Cronos Pressure Reducing Regulator March 2002 E0838 Figure 1. Type Cronos Regulator Features! Control ccuracy Keeps constant inlet pressures to downstream equipment by accurately controlling system
ANDERSON GREENWOOD TANK BLANKETING REGULATORS
Part of a complete system that incorporates a pilot operated, dome-loaded diaphragm type regulator capable of reducing blanketing gas in a single step, providing bubble-tight shut-off and low maintenance.
North American 7337A/B/C-4 High Pressure Gas Regulators
Combustion North American A/B/C-4 High Pressure Gas Regulators Bulletin A/B/C-4 A-4, B-4 and C-4 Regulators reduce high gas supply pressures to practical use levels. Since capacities will vary with the
94270 Vapor Guard Tank Blanketing Valve Vapor Guard Tank Blanketing Valve What is Tank Blanketing? Features How does it work?
94270 What is Tank Blanketing? blanketing systems are used to prevent the escape of liquid vapors into the atmosphere or to prevent moisture from entering a tank and contaminating its contents. A tank
Model PRS-07i. Stainless Steel Low Pressure, In-Line Pressure Regulator (Reducing Valve)
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model PRS-07i Stainless Steel Low Pressure, In-Line Pressure
Types 1808 and 1808A Pilot-Operated Relief Valves or Backpressure Regulators
Types 1808 and 1808A Pilot-Operated Relief Valves or Backpressure Regulators July 2010 W3716 W3507 Type 1808 Type 1808A Figure 1. Types 1808 and 1808A Pilot-Operated Relief Valves or Backpressure Regulators
Model 1800 PFM Series Regulator For Constant Outlet Pressure Precise Fixed Factor Measurement From 0.5 to 30 PSIG
A C E D SB 8551.3 Model 1800 PFM Series Regulator For Constant Precise Fixed Factor Measurement From 0.5 to 30 G AMC Quality System QMI is Accredited by: C R E D I T ISO 900 Registered R E ANSI RAB G I
971 Series Pressure Reducing Regulators
971 Series Pressure Reducing Regulators September 2011 E0833 Figure 1. 971 Series Regulators Features Control ccuracy Keeps constant inlet pressures to downstream equipment by accurately controlling system
JSRH Series. Sanitary Valves JSRH Series High Flow Pressure Reducing Valves. High Flow Bio-Pharma Clean Gas Pressure Reducing Valves
JSRH Series High Flow Bio-Pharma Clean Gas Pressure Reducing Valves The JSRH Series high purity gas pressure regulator was designed and built specifically for Bio-Pharma gas applications. It may also be
Norval Pressure regulator
Norval Pressure regulator NORVAL Classification and Field of Application The NORVAL is a downstream pressure regulator, self actuated, spring loaded for medium and low pressure applications. It is suitable
JSR Series. Sanitary Valves JSR Series Ultra-High Pressure Reducing Valves. High Purity Bio-Pharma Gas Pressure Reducing Valves.
JSR Series High Purity Bio-Pharma Gas Pressure Reducing Valves JSR is the first high purity gas pressure regulator designed and built specifically for hygienic, ASME BPE gas applications. Traditionally,
CSB400 Series Commercial / Industrial Pressure Reducing Regulators
CSB400 Series Commercial / Industrial Pressure Reducing Regulators Bulletin 71.1:CSB400 April 2011 CSB400 SERIES PRESSURE REDUCING TYPICAL CSB403 WITH INTEGRAL TRUE-MONITOR TYPICAL CSB404 WITH INTEGRAL
Slam Shut Valves SCN
Slam Shut Valves SCN SCN > Slam shut valves Introduction SCN is a compact safety device (SAV) which quickly intercept gas flow whenever the pressure under monitoring reaches a pre-set limits, or whenever
Type EZL Pressure Reducing Regulator for Low Differential Pressure Applications
Type EZL Pressure Reducing Regulator for Low Differential Pressure Applications August 2015 290 psig / 20.0 bar Inlet/Outlet Rating Bubble Tight Shutoff Low Differential Absolutely No Atmospheric Bleed
General. Rugged, Reliable with Value-added Features. Pipe Sizes. Temperature Limits. Spring Ranges. Buried Service. Increased Outlet Pipe Sizes
DS-G-REG-13-43-0812-01-A* Model 243-RPC Pilot Operated Regulators Installation and Maintenance Instructions Rugged, Reliable with Value-added Features Genuine, pilot-operated regulators use the same relay
CSB400 Series Commercial / Industrial Pressure Reducing Regulators
October 2015 CSB400 Series Commercial / Industrial Pressure Reducing Regulators P1424 TYPE CSB400 PRESSURE REDUCING P1426 TYPICAL TYPE CSB403 WITH INTEGRAL TRUE-MONITOR P1425 TYPICAL TYPE CSB404 WITH INTEGRAL
1305 Series Pressure Reducing Regulators
Instruction Manual Form 1095 1305 Series October 2009 1305 Series Pressure Reducing Regulators! Warning Fisher regulators must be installed, operated, and maintained in accordance with federal, state,
TOTAL CAPABILITIES IN THE PIPELINE INDUSTRY. UTILITY TECHNOLOGIES INTERNATIONAL CORPORATION Cincinnati Columbus West Jefferson
TOTAL CAPABILITIES IN THE PIPELINE INDUSTRY UTILITY TECHNOLOGIES INTERNATIONAL CORPORATION Cincinnati Columbus West Jefferson OGA SEMINAR DECEMBER 3, 2012 OGA Seminar 2012 2 Regulators Meters Valves Flanges
B56 R, N, & M Field Service Regulator
B5 R, N, & M Field Service Regulator The B5 is a pounds-to-pounds reducing regulator with internal relief, designed for applications requiring accurate regulation over a wide range of inlet and delivery
61 Series Pilots for Pilot-Operated Pressure Reducing Regulators
61 Series Pilots for Pilot-Operated Pressure Reducing Regulators June 2011 Introduction 61 Series pilots are used with Types 1098-EGR and EZL pressure reducing regulators. These pilots can also be integrally
Safety Shut-off Valve SSV
Safety Shut-off Valve SSV 8200-8300 < Accurate operation < Compact design < Easy maintenance Applications The safety shut-off valve is designed for use in gas distribution, and pressure regulation systems.
Model 141-A Regulators
Regulator Installation and Maintenance Instructions Model -A Regulators RM- Rev. Introduction The Model -A regulator is both easy to use and durable for high pressure jobs. Thus, these field regulators
Type Y692 Gas Blanketing Regulator System
Bulletin 7:Y69 Type Y69 Gas Blanketing Regulator System November 14 W930-1 Figure 1. Type Y69 Low-Pressure Gas Blanketing Regulator Introduction An Accu-Pressure Gas Blanketing Regulator System reduces
1800CPB2 Service Regulators Maximum Inlet Pressure 125 PSIG
A C E D SB-8520.2 1800CPB2 Service Regulators Maximum Inlet 125 PSIG AMC Quality System QMI is Accredited by: C R E D I T ISO 9001 Certified Certificate #006697 R E ANSI RAB G I S T R A R Dutch Council
J48 Gas Pressure Regulator. Technical Bulletin
J48 Gas Regulator Technical Bulletin J48 Gas Regulator 02 Elster The J48 is an industrial low pressure regulator suitable for a wide range of pressure reduction applications, including such OEM equipment
Pressure Regulators. Aperflux 851
Pressure Regulators Aperflux 851 80 1 2 3 4 5 6 7 Aperflux 851 > Pressure regulators Introduction Aperflux 851 is a boot style pilot-controlled pressure regulator for medium and high pressure applications.
JSRH Series. Sanitary Valves JSRH Series High Flow Pressure Reducing Valves. High Flow Bio-Pharma Clean Gas Pressure Reducing Valves
JSRH Series High Flow Bio-Pharma Clean Gas Pressure Reducing Valves The JSRH Series high purity gas pressure regulator was designed and built specifically for Bio-Pharma gas applications. It may also be
SPRING-LOADED GAS PRESSURE REGULATOR
MODEL 274 REGULATOR MODEL 852 REGULATOR Serving the Gas Industry Worldwide BD USA MODEL 1 274 SPRING-LOADED GAS PRESSURE REGULATOR Technical Manual July 2010 BRYAN DONKIN USA Introduction, Characteristics,
CP200 Series Commercial / Industrial Pressure- Loaded Pressure Reducing Regulator
CP200 Series Commercial / Industrial Pressure- Loaded Pressure Reducing Regulator May 2010 Figure 1. CP200 Series Pressure Loaded Regulator Features and Benefits Wide Range of NPT Body Sizes Easy to Install
1200 Series Pressure Regulators
SEE MORE AT SORInc.com Request Quote 1200 Series Pressure SOR pressure regulators are durable, high performing instruments that are designed to provide reliable control of pressure in various stages of
B36 R, N, & M High Pressure Service Regulator
Gas B36 R, N, & M High Pressure Service Regulator Applications The B36 is a pounds to pounds reducing regulator for inlet pressures up to 175 PSIG and outlet pressures from 1 to 60 PSIG. Designed for use
1805 Series Relief Valves
Instruction Manual Form 1211 1805 Series October 2011 1805 Series Relief Valves! WARNING Failure to follow these instructions or to properly install and maintain this equipment could result in an explosion
600 Series. Brass Ball Valves
Series Brass Ball Valves full range of economical brass ball valves intended for your common fluid control applications. vailable in standard and full port threaded, full port solder end, and full port
Gas Pressure Regulator HON 280H - 309
Gas Pressure Regulator HON 280H - 309 PRODUCT INFORMATION Serving the Gas Industry Worldwide 2 GAS PRESSURE REGULATOR HON 280H - 309 Technical Data Introduction The HON 280H-309 are spring loaded, externally
RB4000 Series Regulator Commercial & Industrial Regulator
Gas RB4000 Series Regulator Commercial & Industrial Regulator Applications The RB4000 regulator is designed for gas supply networks, district station regulation, industrial service regulation, and all
V DGX Series. Direct-Operated Regulators Manual D103834X012
V2015.3 DGX Series Direct-Operated Regulators Manual D103834X012 Contents 1. Introduction... 3 2. Specifications... 3 3. Features... 3 4. Dimensions... 4 5. Principle of Operation... 5 6. Performance Curves...
POP Safety Valve. POP Safety Valve INTRODUCTION DEFINITIONS
POP Safety Valve POP Safety Valve INTRODUCTION The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both plant and personnel. Safety
BAILEY CASH VALVE. Other cryogenic fluids include liquefied natural gas, fluorine, krypton, neon, methane and ethane.
BAILEY CASH A WORD ABOUT CRYOGENICS Cryogenics -- the science of materials at extremely low temperatures -- has become more and more important to industry. One important aspect of this field is the liquification
EZR Series Pressure Reducing Regulator
Bulletin 71.2 D102626X012 EZR Series August 2018 EZR Series Pressure Reducing Regulator W7399 TYPE EZR REGULATOR Introduction The Type EZR pilot-operated, pressure reducing regulator is designed for natural
MODEL 273PL GAS PRESSURE REGULATOR
Edition GD273PL.06.USA BRYAN DONKIN RMG USA Serving the Gas Industry WORLDWIDE Applications Primarily utilized for commercial, industrial and multi-installation applications For natural gas and all non-corrosive
Safety Cut-Off Valve HON 305
Safety CutOff Valve HON 305 PRODUCT INFORMATION Serving the Gas Industry Worldwide SAFETY CUTOFF VALVE HON 305 Introduction, Application, Features, Technical Data Introduction The HON 305 is a safety cutoff
CL231 Series Regulator Commercial Regulator
Gas CL231 Series Regulator Commercial Regulator Applications The CL231 regulator is designed primarily for use in medium size commercial and industrial installations requiring highly accurate pressure
CL31 Series Commercial Regulator. Advanced Metering and Regulation Technology at Work.
IMAC Systems, Inc. 90 Main Street, PO Box 1605 Tullytown, PA 19007 Tel. 1-800-955-4GAS (215) 946-2200 Fax:(215) 943-2984 www.imacsystems.com CL31 Series Commercial Regulator Advanced Metering and Regulation
BULLETIN FOR ACCURATE INDICATION AND CONTROL OF GAS AND LIQUID FLOW IN LOW RANGES.
BULLETIN 20-7000 ROTAMETERS PURGE FOR ACCURATE INDICATION AND CONTROL OF GAS AND LIQUID FLOW IN LOW RANGES. INTRODUCTION McCrometer purge rotameters are precision-made instruments designed to accurately
Pressure Regulator B-95
Pressure Regulator B-95 TYPE B WATER & AIR TYPE B INTERIOR WATER & AIR B SERIES VALVES DESTRIPTION The Cash Valve Series B pressure reducing and regulating valves are single seated, spring loaded, direct
R-1450 R6. Safety Relief Valve
R-1450 R6 Safety Relief Valve T H E G A S I N D U S T R Y Purpose Safe practice in the transmission, distribution and utilization of gas requires a device to limit line pressure to a predetermined safe
Precision and Instrument Regulators 1/4" port size
Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38
North American Orifice Metering System
Combustion North American Orifice Metering System 8697 and M8697 Metering Orifices accurately measure gas flows to industrial burners. They are compact, inexpensive, and can be installed in individual
776 Cryogenic Safety Valve
776 Cryogenic Safety Valve INTRODUCTION 776 Cryogenic Safety Valve The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both plant
Horizontal Bladder Tanks
DATA SHEET Horizontal Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
Proportional Relief Valves
www.swagelok.com Proportional Relief Valves R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections 2 Proportional Relief Valves
RB 4700 Commercial & Industrial Regulator
RB 4700 Commercial & Industrial Regulator The RB 4700 regulator is designed for use in industrial and distribution applications such as district station and heating plants, and for industrial customers.