Wafer type. the product

Transcription

1 . VFM5 Vortex Flow Meter Flanged type Wafer type Insertion type VFM5 is a powerful flow meter utilizing Karman vortex theory, which can meet the requirement of measuring the flow rate of various fluids such as gas, steam and liquid. The product uses the VFM5 transmitter technology, which provides with the excellent signal processing capability and enhance the vortex metering technology to a new level, which means it has lower measuring limit, better stability and accuracy. The special signal processing method has also ensured a better anti vibration by eliminating the vibration signals. The VFM5 platform is also an open platform, which means we can keep on upgrading its function according to customer s unique requirement, and make the product a highly custom orientation product. Sensor design that free from maintenance. Self density calculation function is optional, can calculate density and mass flow rate without mass flow computer. Can output mass flow rate, temperature and pressure by working with separate RTD and pressure transmitter T&P compensation programmed model available,can temperaturee and pressure sensor to measure mass flow direct work with separate Can output mass flow rate, temperature and pressure by working with RTD and pressure transmitter. Unit selectable function, meet different requirement on reading s units. DIN, DN, ANSI, JIS flange for option, can fit in any process connection. Many other options, such as 0SS and SS, insertion, wafer and flanged, different compensation method, different output methods. Customer can find the most suitable model to save cost.

2 . Specification ) Process Fluids: Used in liquid, gas, and steam applications. Fluids must be homogeneous and single phase. ) Line Sizes: The wafer and flanged type cover line sizess as below.,.5,,,, 5,,,0, (DN5, DN0, DN50, DN0, DN00, DN5, DN50, DN00, DN50, DN00) The insertion type covers DN00~700. Any requirement on other size, please check with our sales or engineers ) Process connection: Flanged, wafer, insertion. DN, ANSI, JIS, DIN flanges are optional ) Displayer: Integral or remote. buttons control. lines LCD displayer. st line has 5 digits to display V/flow rate/ mass flow / frequency/ temperature/ pressure nd line has digits to displayer total flow 5) Measureable parameter Volume flow rate in pipe, velocity (Can measure mass flow rate, wired to separatee RTD and pressure transmitter.) temperaturee and pressure if ) Measureable flow rate: A 0: turndownn ratio in 5~70m/s for gas and steam and in 0.5~7m/s for liquid.(for example, 5~50 or 5.5~555 or ~0 for gas) You can also reference to Chart for measurable flow rate range in m/hr and kg/ /hr ( measurable range is ~0m/s for gas,steam,and 0.~ ~m/s for liquid. For DN5 or smaller pipe and DN00 or larger pipe, turndown ratio is 5:. If the application requires higher turndown ratio, please advise to check possibility.) 7) Accuracy: Wafer and flanged type % of reading for gas and steam, 0.75% of reading for liquid. Insertion type % of reading ) Fluid temperature: version: 0~0 degree C.(Insertion type to 50 dgr C only) Expanded high temperature version: 0~50 degree C. (Not for insertion type) 9) Pressure rating: pressure rating is.mpa. al pressure rating includes.5mpa, Mpa,.Mpa. For higher pressure, please contact us to check possibility

3 0) Output Pulse, ( pulse and 00~000Hz Frequency, K factor set according to calibration) ~0mA HART@~0mA(the HART signal is on ~0mA) M BUS RS5 ) Explosive proof Ex proof version is optional. ( Ex dii C T Gb from NEPSI) ATEX, CSA, FM, IECEx proved enclosure are optional.. Dimension )Size and dimension for wafer type Size K (Pipe O/D) L(Pipe length) W(Flange screwhole distance) C(flange thickness) m(screwhole diameter) n(screw qty) Meter height Flange O/ D Remark: The flange O/D, screw holes distance, flange thickness, screw holes diameter and screw

4 qty are for the counter flanges, unit in mm.counter flanges, screw and bolts, gaskets are usually along with package except customer do not need them. )Size and dimension for flanged type Dimension for ANSI RF50 Flanged Size K(Flange O/D) L(Pipe length) W(Flange screwhole distance) C(flange thickness) m(screwholee diameter) n(screw qty) Meter height Remark: Flanged version do not contains screws and bolts in the package unless customers need to purchase from us. We also have flanged type in other standard and pressure rating. Please check with us if you require flanged version other than ANSI RF50. Ordering information ) Mode number The model number is usually VFM 579 XXX, please reference to the table below for what the model codes stand for.

5 Mode codes General model VFM5 VFM5 Vortex flowmeter Transmitter Location T R Integral Remote The standard remote cable length is 0m, if you required longer cable, please let us know Process connection 0 Insertion Flanged Wafer Downsized wafer Insertion for DN0~700, wafer and flanged type for pipes smaller than 00mm Fluid type Liquid Gas Steam If the fluid is steam, please advise if it is saturated or superheated OCrNi9(0) For other materials, please advise 5 Wetted part material Q Other your speical requirement. Any material will cause a longer production time except 0SSS. Mpa.5 Mpa Pressure rating 5 Mpa. Mpa 7 0 Mpa Mpa N T 0 If the temperature is higher than 7 Medium Temperaturee S H T 0 T 50 (wafer or flanged) 50 degreec or lower than 0 degree C, please advise us to check if we can do pulse/~0ma Battery power/pulse Transmitter pulse/~0ma@hart pulse/rs5 The HART signal is output though ~0mA. 5 pulse/rs5 /T&P compensation 7 pulse/~0ma/t&p compensation 9 Cable grinder N D Q M0x.5 /" NPI Other This digits code indicates the inner Pipe size xxx xxx diameter of the pipe, for example, if he pipe is DN50, the code is 050. If the pipe is DN00, the code is 00 5

6 ) Other ordering information required To ensure the customer find the right product which can fit in the application, it would be better if below information is provided with. a. Detailed fluid introduction. What is the fluid (air or steam or N or )? The viscosity and density of the fluid, the accurate process pressuree and temperature ranges of the fluid are all very important. This information is required before we can know if our flowmeter can be used in the fluid and what other treatment should be chosen b. Flow rate. As indicated in earlier section, our measurement range is a 0: range in 0.5~7m/s for liquid, 5~70m/s for gas and steam, which are alll velocity range. If the flow range customer required is volume range (m/hr, l/min) or mass flow rate (kg/hr, lb/hr, tons/day),we have to transfer them into velocity range. If the requirement of customer is a mass flow range, we have to calculate the density of the fluid base on the process pressure and temperature, than transfer it in to volume flow range and finally to velocity range. To know the process density of saturated steam, please reference to the appendix of density table of saturated steam. c. If the fluid is O, the wetted parts have to be degreased.also we can do the degreasing in our workshop, we strongly recommend customer to do it again at field before installation. d. For wafer type, we will provide counter flanges which will be welded to the pipe during installation, thus customer should advise the material of the process pipe line. Our counter flanged will be made in the material same as the process pipe line to ensure a reliable welding. e. For wafer type, we will provide customer along with screws and bolts for installation. But for flanged type, as all bolts and screws are standard parts, customer can prefer to buy them in local market to save the cost of transportation. f. For flanged type, customerss need to advise the type of the flanged. g. If customer should have any other inquires or special requirements, please be free to check with our engineer or sales person. ) Example of a model selection Application: Saturate steam, process pressure 0.Mpa. Flow rate:00~000kg/hr DN00 ( ) ANSI flanged process connection.

7 RS5+PULSE output, VDC power, integral displayer Counter ordering informationn In 0..Mpa, the density of saturated steam is about.kg/hr (70 degree C) 00 kg/hr = 9 m/hr =.m/s 0000 kg/hr = 9 m/hr = m/s The velocity is within our standard measurement range of ~0m/s Counter solution: Model number:vfm5 N TS5N00 or VFM5 M TS5N000 ANSI flange, 0.Mpa saturated steam, ~0 m/s, temperature compensation and RTD required. Appendix I. Specification chart Fliud to measure Nominal diameter Liquid, steam, gas Wafer/Flanged(ANSI/DN/DIN/JIS):5mm~00mm(/ /"~") Insertion:00mm~700mm("~") Measurement range(m/s) Liquid 0.5~7 steam or gas 5~70 Accuracy Repeatability Output Process Temperature Range Process Pressure Limit Ambient Temperature Range Ambient Humidity Electrical Connection Materials ±% RD (insertion is.5% %RD) 0.% RD (insertion is.5%rd) 0mA@ HART / RS 5 0 ~0 ; 0 ~50 ; 0. MPa ( kg/cm) to flange rating 0 to 5 C 5 to 00% RH / NPT, M0.5 0 SS, SS, L SS 7

8 Appendix II. Flow rate range of gas/steam Extended Min Flow Extended Max Flow Min Flow rate Max Flow rate rate (m/hr) rate (m/hr) (m/hr) (m/hr) DN5 (0.5")..5.. DN0 (0.75") DN5 (") DN (.5") DN0 (.5") DN50 (") DN (.5") DN0 (") DN00 (") DN5 (5") DN50 (") DN00 (") DN50 (0") DN00 (") Appendix III. Flow rate range of liquid Min Flow Max Flow Min Flow rate Max Flow rate rate (m/hr) rate (m/hr) (m/hr) (m/hr) DN5 (0.5") DN0 (0.75") DN5 (") DN (.5") DN0 (.5") DN50 (") DN (.5") DN0 (") DN00 (") DN5 (5") DN50 (") DN00 (") DN50 (0") DN00 (")