Air Saving Valve. Series ASQ. Series ASR. Pressure Valve. Flow valve TMH ASD AS AS-FG AS-FP AS-FM ASP ASN AQ ASV AK VCHC ASS. r r AS-FE KE 10 0.

Size: px
Start display at page:

Download "Air Saving Valve. Series ASQ. Series ASR. Pressure Valve. Flow valve TMH ASD AS AS-FG AS-FP AS-FM ASP ASN AQ ASV AK VCHC ASS. r r AS-FE KE 10 0."

Transcription

1 Air Saving Valve Series R Pressure Valve Series Q Flow Valve P r D -FE KE -FG -FP -FM pressure (MPa) -D -T P ow valve Fl N AQ V e n by o i t p nsum n stroke o c r i r a Cuts g the retu e. tin sur opera uced pres ed sure valv at a r es 3 pressure (MPa) % 4 n in tion o i t c u sump redc on air Air consumption reduction ratio (%) TMH 4 AK VCHC S e trok ng s ki Wor R Q e trok rn s Retu 3

2 Cuts air consumption by operating the return stroke at a reduced pressure. Conventional valve Working and return strokes operated at the same pressure Air saving valve operated at a reduced pressure Pressure valve Flow valve Regulator with check valve + Speed controller Quick supply and exhaust valve + Speed controller Series 4 R (Meter-in, Meter-out) Series Q

3 Smooth operation of working and return strokes possible. Consistent speed control achieved by preventing jerky movement of working strokes. Improved response time Operation delay in a return stroke is reduced by the use of a uick supply and exhaust valve. Cylinder operation by conventional 2 pressure control Cylinder operation by air saving valve Cylinder operation by speed controller Delay in return operation TMH pressure D.1MPa.1 MPa FE KE Delay time (sec).2mpa.2 MPa 1..3MPa.3 MPa MPa MPa.4.2MPa.2 MPa.3MPa.3 MPa.MPa. MPa FG Quick supply and exhaust valve -FP -FM Cylinder operating pressure (MPa) -D -T 2 33 P Air consumption reduction ratio (%) Cylinder bore size (mm) N Cylinder speed: 2 mm/sec Cylinder stroke: 2 mm Easy piping AQ The set pressure can be either fixed or variable. Fixed set pressure type Variable set pressure type The body and One-touch fitting allow 3 rotation. The sealant on the male thread is standardized. (Fixed at.2 MPa) (Variable between.1 and.3 MPa) Graduated knob V AK VCHC S 2 3 R Q Body One-touch fittings Other applications Jerk prevention in vertical operation of the cylinder Quick air charge at the end of stroke for press applications Balancing pressure Speed controller A knob cap is attached to the variable set pressure type. Series Variations Model Port size R43F-2 R3F-2 R3F-3 R3F-3 R3F-4 R1/4 Q43F-2 Q3F-2 Q3F-3 Q3F-3 Q3F-4 Applicable tubing O.D. (mm) 8 R1/4 R3/8 R3/8 R1/2 Speed controller

4

5 : Series R Regulator with check valve and flow control valve integrated into a single construction : Series Q Air Saving Valve Pressure Valve R Model R Q 4 Body size 1/4 standard 3/8 standard 1/2 standard Type 3 Universal Model R43F-2 R3F-2 R3F-3 R3F-3 R3F F 2 S With One-touch fitting Model Q43F-2 Q3F-2 Q3F-3 Q3F-3 Q3F-4 Flow Valve Series R /Series Q How to Order Port size 2 R1/4 3 R3/8 4 R1/2 Port size R1/4 R1/4 R3/8 R3/8 R1/2 F2 Applicable tubing O.D. mm 8 8 mm mm mm Nil F2 With seal Option Variable set pressure type (.1 to.3 MPa) Fixed set pressure type (.2 MPa) Nil J Lock nut option Hexagon lock nut Round lock nut Applicable tubing O.D. (mm) 8 TMH D -FE KE -FG -FP -FM -D -T P N AQ V AK VCHC S R Q Pilot valve and two-way flow control valve integrated into a single construction Specifications Fluid Proof pressure Maximum operating pressure Set pressure Variable range Fixed (option) Ambient and fluid temperature Applicable tubing material Air 1. MPa 1. MPa.1 to.3 MPa.2 MPa to C (with no freezing) Nylon, Soft nylon, Polyurethane 7

6 Series R / Series Q Effective Area Pressure Valve: Series R Free flow Type Sonic conductance Critical dm 3 /(s bar) pressure ratio R43F-2-S(-F2) 1 R43F-2-8S(-F2) 1.1 R43F-2-S(-F2) 1.1 R3F-2-S(-F2) 1.3 R3F-2-8S(-F2) 1. R3F-2-S(-F2) 1.7 R3F-2-S(-F2) 1.7 R3F-3-S(-F2) 1.3 R3F-3-8S(-F2) 1. R3F-3-S(-F2) 1.7 R3F-3-S(-F2) 1.7 R3F-3-S(-F2) 2.8 R3F-3-S(-F2) 2.9 R3F-4-S(-F2) 2.8 R3F-4-S(-F2) 2.9 Operating Principle Working Stroke Controlled flow Sonic conductance Critical dm 3 /(s bar) pressure ratio Flow Valve: Series Q Meter-out Type Sonic conductance Critical dm 3 /(s bar) pressure ratio Q43F-2-S(-F2) Q43F-2-8S(-F2) Q43F-2-S(-F2) Q3F-2-S(-F2) Q3F-2-8S(-F2) Q3F-2-S(-F2) Q3F-2-S(-F2) Meter-in Critical pressure ratio Q3F-3-S(-F2) Q3F-3-8S(-F2) Q3F-3-S(-F2) Q3F-3-S(-F2) Q3F-3-S(-F2) Q3F-3-S(-F2) Q3F-4-S(-F2) Q3F-4-S(-F2) Return Stroke Sonic conductance dm 3 /(s bar) Pressure, Stroke PH Cylinder movement PR A B C PH PR Pressure, Stroke D PR Cylinder movement by flow valve F Cylinder movement by speed control valve PH PR E PH Time 1. The cylinder starts smoothly because jerks are prevented by meter-in control. Jerk prevention Time 3. To prevent delay due to the pressure gap, air is rapidly exhausted to decrease the pressure from D to E, after which the piston moves at a constant speed. If a speed controller is used instead of the flow valve, exhausting air will take more time as illustrated by line D-F, resulting in longer stop time of the cylinder and a conseuent time loss. Quick exhaust 2. When the cylinder reaches the stroke end, the uick air charge by the flow valve rapidly increases the rear side pressure (PH) from A to B. If a speed controller is used instead of the flow valve, charging air will take more time as illustrated by line A- C, causing delay in the pressure rise. 4. The cylinder operates at a low pressure reuired for a return. Quick supply Low pressure operation 8

7 Air Saving Valve Pressure Valve Series R / Flow Valve Series Q Flow Characteristics Pressure Valve: Series R (Inlet pressure:. MPa) R43F R3F R3F Flow Valve: Series Q Meter-out Type (Inlet pressure:.3 MPa) Q43F Meter-in Type (Inlet Pressure:. MPa) Q43F , 8, 8, 8 Q3F Q3F 8 8 Note) The flow characteristics are representative values. Q3F Q3F TMH D -FE KE -FG -FP -FM -D -T P N AQ V AK VCHC S R Q Pressure Characteristics (R) R43F, R3F.4 Set pressure.3 MPa R3F.4 Set pressure.3 MPa P2: Outlet pressure Set pressure.2 MPa Set pressure.1 MPa P2: Outlet pressure Set pressure.2 MPa Set pressure.1 MPa P1: Inlet pressure P1: Inlet pressure 9

8 Series R / Series Q Selection and Adjustment Install a flow valve on the working side which reuires the cylinder output and a pressure valve on the return side. The product cannot be used in cases where the same pressure is necessary for both working and return strokes. In such cases use a speed controller. Horizontal mounting Low pressure side: High pressure side: Low pressure side Series R High pressure side Series Q Refer to Adjustment Procedure 1 for pressure and speed adjustment. Vertical mounting Low pressure side: High pressure side: Series Low pressure side R Series Q High pressure side In case the load ratio is % or lower at the set pressure of the flow valve: Refer to Adjustment Procedure 1 for pressure and speed adjustment. If the load ratio at the set pressure of the flow valve exceeds %, install a dual speed controller (meter-in and meter out control) on the high pressure side. Low pressure side: High pressure side: Dual speed controller Series Low pressure side R Dual speed controller (Meter-in and Meter-out) Series High pressure side D Refer to Adjustment Procedure 2 for pressure and speed adjustment.

9 2 Air Saving Valve Pressure Valve Series R / Flow Valve Series Q Adjustment Procedure 1 Pressure Adjustment 1. The fixed set pressure type (-F2) does not reuire adjustment because the pressure is fixed at.2 MPa for both the pressure valve and the flow valve. 2. The set pressures of the variable set pressure type pressure valve and flow valve are adjusted with knob A and knob B respectively. Turn the knob clockwise to increase the pressure and counterclockwise to decrease the pressure. 3. The graduations 1, 2 and 3 correspond to.1,.2 and.3 MPa respectively. Align the bottom end of the knob with the graduated line for adjustment. Align the bottom end of the knob with the graduated line. The figure illustrates the 3 case in which the pressure is set at.2 MPa. 4. Set the same pressure for the pressure valve and the flow valve (.2 MPa as the recommended value).. The inlet side should be supplied with a pressure which is higher than the set pressure by.1 MPa or more.. Cap the valve after adjustment. Adjustment Procedure 2 Pressure Adjustment Pressure Valve: Series R C A 1. The fixed set pressure type (-F2) does not reuire adjustment because the pressure is fixed at.2 MPa. 2. The pressure at the low pressure side (return stroke side) is adjusted by the pressure valve. 3. The set pressure is adjusted with knob A. Turn the knob clockwise to increase the pressure and counterclockwise to decrease the pressure. 4. The graduations 1, 2 and 3 correspond to.1,.2 and.3 MPa respectively. Align the bottom end of the knob with the graduated line for adjustment.. Keep the set pressure as low as possible in order to achieve good air saving effect.. Cap the valve after adjustment. Speed Control 1. The cylinder speed is adjusted with knobs C, D and E. First have all the knobs fully closed and then open them gradually for adjustment. Turn the knob clockwise to close (decrease the speed of the piston rod) and counterclockwise to open (increase the speed of the piston rod). 2. Speed adjustment for the working stroke The speed is adjusted with the pressure valve and the flow valve. Open knobs C and E gradually until the reuired speed is achieved. Make sure that knobs C and E are opened by the same number of rotations. Note 1) If the piston rod jerks, close knob E until the smooth operation is achieved. 3. Speed adjustment for return stroke The speed is adjusted with the flow valve. Open knob D gradually until the reuired speed is achieved. 4. Be sure to tighten the lock nut after adjustment. Flow Valve: Series Q D Speed Control B E 1. The cylinder speed is adjusted with knobs C, F and G. First have all the knobs fully closed and then open them gradually for adjustment. Turn the knob clockwise to close (decrease the speed of the pistoin rod) and counterclockwise to open (increase the speed of the piston rod). 2. Speed adjustment for the working stroke The speed is adjusted with the pressure valve and the dual speed controller. Open knobs C and G gradually until the reuired speed is achieved. Make sure that knobs C and G are opened by the same number of rotations. Note 1) If the piston rod jerks, close knob G until the smooth operation is achieved. 3. Speed adjustment for return stroke The speed is adjusted with the dual speed controller. Open knob F gradually until the reuired speed is achieved. 4. Be sure to tighten the lock nut after adjustment. TMH D -FE KE -FG -FP -FM -D -T P N AQ V AK VCHC S R Q Pressure Valve: Series R C A Dual Speed Controller: Series D F G 1

10 Series R / Series Q Construction Pressure Valve: Series R Variable type R43F-2 type R3F-3 type R3F-4 type!8!9 e!4 R43F-2 type R3F-3 type u o!3 R3F-4 type u o!3!8!9 i y!!1!2 e!4 i!! R3F-2 type R3F-3 type!9 r Component Parts No Description Body A Body B Seat ring Body B1 Body B2 Body C Stopper Valve Piston Adjustment screw Cap Adjustment spring Material Stainless steel HNBR/ Polypropylene Steel wire 2 R3F-2 type!8 u o!3 R3F-3 type!8 u o!3!9 r!4 i y!!1!2!4 i!! Note No Description U seal Body C Adjustment plug Needle Lock nut U seal Elbow body Spacer (1) Cassette Seal Drive body (2) Material HNBR Steel (3) HNBR NBR Note Zinc chromated (3) Note 1) Not used for ø and ø8. Note 2) Not used for ø and ø. Note 3) The material and surface treatment of the lock nut option-j (round type) is brass and electroless nickel plating, respectively. However, note that only the R43F uses steel and electroless nickel plating.

11 Air Saving Valve Pressure Valve Series R / Flow Valve Series Q Flow Valve: Series Q @4 @4 Q43F-2 type Q3F-3 type i u Q43F-2 type Q3F-3 type Q3F-4 type y Q3F-4 type!!8!!2!4!1!!8 i Q3F-2 type Q3F-2 type Q3F-3 type u Q3F-3 type y!!2!8!8!4!!!1 t r Component Parts No Description Body A Body B Seat ring Body B1 Body B2 Adjustment screw Cap Adjustment plug Body C Body D1 Body D2 Body D3 Material Polypropylene Note No Description Piston valve Adjustment spring Needle Lock nut Lock nut U seal U seal Elbow body Spacer (1) Cassette Seal Drive body (2) Material HNBR/ Steel wire Steel (3) Steel (3) HNBR HNBR NBR Note o!!3!4!1 y!!3!4!1 Zinc chromated (3) Black zinc chromated Note 1) Not used for ø and ø8. Note 2) Not used for ø and ø. Note 3) The material and surface treatment of the lock nut option-j (round type) is brass and electroless nickel plating, respectively. However, note that only the Q43F uses steel and electroless nickel plating. 3 TMH D -FE KE -FG -FP -FM -D -T P N AQ V AK VCHC S R Q

12 Series R / Series Q Dimensions Pressure Valve: Series R Variable set pressure type Fixed set pressure type (-F2) L1 L1 L2 d L2 d M M L ød1 ød2 L4 H (Width across flats) A2 L A1 ød3 ød3 ød1 ød2 H (Width across flats) A2 L A1 L L3 T T Model d (1) T H D1 D2 D3 L1 L2 L3 (2) L4 (3) L (4) L A2 () M Max. Min. Max. Min. 1 2 R43F-2-S,-F2 R43F-2-8S,-F2 R43F-2-S,-F2 R3F-2-S,-F2 8 R1/ R3F-2-8S,-F R1/ R3F-2-S,-F R3F-2-S,-F2 R3F-3-S,-F R3F-3-8S,-F R3/ R3F-3-S,-F R3F-3-S,-F R3F-3-S,-F R3/ R3F-3-S,-F R3F-4-S,-F R1/ R3F-4-S,-F Note 1) d indicates the applicable tubing O.D. Note 2) L3 is the dimension for the variable set pressure type. Note 3) L4 is the dimension for the fixed set pressure type. Note 4) Reference dimensions Note ) A1 and A2 are reference dimensions after installation. Note ) 1 is the weight for the variable set pressure type and 2 is that for the fixed set pressure type. 4

13 Air Saving Valve Pressure Valve Series R / Flow Valve Series Q Flow Valve: Series Q Variable set pressure type Fixed set pressure type L1 L2 M d L L1 L2 M d TMH D ød2 L8 ød2 L8 -FE KE -FG -FP L3 L4 L3 L4 -FM -D -T P L H (Width across flats) ød4 H (Width across flats) ød4 N AQ V AK L7 A1 ød1 ød3 L7 A1 ød1 ød3 VCHC A2 A2 S T T R Q Model d (1) T H D1 D2 D3 D4 L1 L2 L3 L4 (2) L7 (2) L (3) L (4) L8 A1 () A2 () Weight (g) M Max. Min. Max. Min. Max. Min. 1 2 Q43F-2-S,-F2 Q43F-2-8S,-F2 Q43F-2-S,-F2 Q3F-2-S,-F2 8 R1/ Q3F-2-8S,-F R1/ Q3F-2-S,-F Q3F-2-S,-F2 Q3F-3-S,-F Q3F-3-8S,-F R3/ Q3F-3-S,-F Q3F-3-S,-F Q3F-3-S,-F R3/ Q3F-3-S,-F Q3F-4-S,-F R1/ Q3F-4-S,-F Note 1) d indicates the applicable tubing O.D.. Note 2) Reference dimensions Note 3) L is the dimension for the variable set pressure type. Note 4) L is the dimension for the fixed set pressure type. Note ) A1 and A2 are reference dimensions after installation. Note ) 1 is the weight for the variable set pressure type and 2 is that for the fixed set pressure type.

14 Series R/Q Specific Product Precautions Be sure to read before handling. Refer to front matter for Safety Instructions and pages 48 to 471 for Flow Control Euipment Precautions. Selection Warning 1. Keep the set pressure range of the outlet pressure of the pressure valve within 8% that of the inlet pressure. If the value exceeds 8%, the outlet pressure may become unstable, affected by the fluctuation of the inlet pressure. Installation Warning 1. The number of opening and closing rotations of the needle valve and adjustment screw should be adjusted within the range of the specifications. Since it has a pull-out stop mechanism, it will not rotate past the limit. Confirm the number of rotations for the product being used, as excessive turning of the needle will cause damage. 2. The valve cannot be used if there are load fluctuations. The piston rod may jerk during operation. 3. In case a closed-center solenoid valve is used, switch to the center position only after pressure charge inside the cylinder at the stroke end is completed. If the pressure charge is insufficient, the piston rod may jerk after restart. 4. When the valve is used for an actuator operating vertically, the actuator may lurch depending on the load. For the adjustment method, please refer to page 1. Operating Caution 1 The valve cannot be used if the same pressure is reuired for both the working and return strokes. The pressure valve and flow valve are designed to save air by the difference in the operating pressure. 2 Install a flow valve on the working side which reuires the cylinder output and a pressure valve on the return side. The cylinder may not operate if the valves are installed on the wrong sides. Pressure Valve Series R Flow Valve Series Q 3 If a closed-center, exhaust-center, pressure-center or perfect solenoid valve is used and the solenoid valve is set at the center position, the cylinder may move to the position where the pressure balance and load balance are achieved.

Air Saving Valve. Pressure Valve Flow Valve

Air Saving Valve. Pressure Valve Flow Valve Air Saving Valve Series Series Pressure Valve Flow Valve % reduction in air consumption Cuts air consumption by operating the return stroke at a reduced pressure. valve Pressure Air consumption reduction

More information

Air Saving Valve reduction in 40% air consumption 40% air consumption Air consumption reduction ratio (%) Flow valve Flow valv

Air Saving Valve reduction in 40% air consumption 40% air consumption Air consumption reduction ratio (%) Flow valve Flow valv CAT.ES-173 A Air Saving Valve % reduction in air consumption Cuts air consumption by operating the return stroke at a reduced pressure. valve Pressure Air consumption reduction ratio (%) 3 1.1.1...3 pressure

More information

Clean Speed Controller with One-touch Fitting

Clean Speed Controller with One-touch Fitting Clean Speed Controller with One-touch Fitting Series -FPQ/-FPG -FPG Series -FPQ Series Speed controllers for clean room use S R -FPQ: (electroless nickel plated) and -FPG: are now available as a series.

More information

Pilot Check Valve: Metal Body Type

Pilot Check Valve: Metal Body Type INFORMATION Pilot Check Valve: Metal Body Type The use of a metal body improves strength and environmental resistance. Temporary intermediate stops are possible. *1 *1 Precise intermediate stops are not

More information

Air Saving Valve reduction in 40% air consumption 40% air consumption Air consumption reduction ratio (%) Flow valve Flow valv

Air Saving Valve reduction in 40% air consumption 40% air consumption Air consumption reduction ratio (%) Flow valve Flow valv CAT.ES2-3 A Air Saving Valve 4% reduction in air consumption Cuts air consumption by operating the return stroke at a reduced pressure. valve Pressure Air consumption reduction ratio (%) 4 3 2.1.15.2.25.3

More information

AS13 1F-M3 AS13 1F-M5 AS23 1F-01 AS23 1F-02

AS13 1F-M3 AS13 1F-M5 AS23 1F-01 AS23 1F-02 Spee Controller with One-touch Fittings Series Elbow Style, Universal Style Minimizes installation time an cost Reuces the mounting height an enables compact machinery esign. Effective area is larger than

More information

Series AS-FPQ/AS-FPG. Speed Controller with One-touch Fitting for Clean Room. Speed controllers for clean room use

Series AS-FPQ/AS-FPG. Speed Controller with One-touch Fitting for Clean Room. Speed controllers for clean room use CAT.ES20-19 A Speed Controller with One-touch Fitting for Clean Room Series AS-FPQ/AS-FPG Series AS-FPG Series AS-FPQ Speed controllers for clean room use AS-FPQ: Brass (electroless nickel plated) and

More information

Components for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly.

Components for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly. Components preparation and pressure adjustment ABP Overview ABP is a component that enables boosting by s only up to twice primary pressure (.0MPa max.) in combination with using air tank but not using

More information

Standard Specifications

Standard Specifications NARM, 2 Ways of Connection Small Size Pressure Gauge ø5mm Reverse flow function available on the standard model Space Saving -B2 NARM-6A-NG Standard Specifications Fluid Proof pressure psig (MPa) Max.

More information

reduces flow setting time and setting errors!

reduces flow setting time and setting errors! Speed Controller with Indicator Numerical indication of handle rotation for flow rate reduces flow setting time and setting errors! New RoHS Indicator window Size Size or larger Indicator window Number

More information

Specifications. Construction. 2 port valve/series VHK2 3 port valve/series VHK3. Component Parts. Standard style. Flame resistant style

Specifications. Construction. 2 port valve/series VHK2 3 port valve/series VHK3. Component Parts. Standard style. Flame resistant style Finger Valve SeriesVHK Large effective area: to mm 2 Small knob operating force: 0.43 to 1.4 kgfcm Poppet valve construction with few seal defects The series begins with the min. tube O.D. of. Selection

More information

Direct Operated Precision Regulator Modular Style. Standard Specifications

Direct Operated Precision Regulator Modular Style. Standard Specifications 1 Direct Operated Precision Regulator Modular Style Series P3 Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8) 258-92-www.stevenengineering.com

More information

Compact Regulator. ARX20 Series. 2.0 MPa compatible, piston type compact regulator ARJ

Compact Regulator. ARX20 Series. 2.0 MPa compatible, piston type compact regulator ARJ Compact Regulator 2 Series 2. MPa compatible, piston type compact regulator V SR X AP1 Compatible with inlet supply pressure of 2. MPa Employs a knob shape for easy operation Compact type (face to face

More information

One-touch Fittings Manifold. Porting. One-touch fitting. One-touch fitting. One-touch fitting. One-touch fitting. One-touch fitting.

One-touch Fittings Manifold. Porting. One-touch fitting. One-touch fitting. One-touch fitting. One-touch fitting. One-touch fitting. One-touch Fittings Manifold Series KM RoHS Compact piping possible. Manifold piping possible. Many varieties (0 types) are available. s give the most efficient operation. KM1 KM1 orting Rc female thread

More information

EXH. Specifications. Descriptions. Min. working pressure MPa

EXH. Specifications. Descriptions. Min. working pressure MPa Functional explanation Primary pressure flowed from passes through check valve on side, and flows in chamber A and B. Primary pressure also passes through pressure adjustment section and switching valve,

More information

Specifications. Construction. 2 port valve/series VHK2 3 port valve/series VHK3. Component Parts. Standard style. Standard style

Specifications. Construction. 2 port valve/series VHK2 3 port valve/series VHK3. Component Parts. Standard style. Standard style Finger Valve eriesvhk Large effective area: to mm 2 mall knob operating force: 0.43 to 1.4 kgfcm Poppet valve construction with few seal defects The series begins with the min. tube O.D. of. election from

More information

Power Valve: Precision Regulator. High precision, large capacity relief regulator

Power Valve: Precision Regulator. High precision, large capacity relief regulator Power Valve: Precision Regulator Series VEX High precision, large capacity relief regulator port large exhaust capacity pressure reducing valve which utilizes a nozzle flapper mechanism available as air

More information

Specifications. JIS Symbol 2 port valve 3 port valve (A) 2 (A) 2. Construction. 2 port valve/series VHK2 3 port valve/series VHK3.

Specifications. JIS Symbol 2 port valve 3 port valve (A) 2 (A) 2. Construction. 2 port valve/series VHK2 3 port valve/series VHK3. Finger Valve eriesvhk Large effective area:.0 to 7.5 mm mall knob operating force: 0. to. kgfcm Poppet valve construction with few seal defects The series begins with the min. tube O.D. of. election from

More information

Flow control valves Series RFU - RFO 2/

Flow control valves Series RFU - RFO 2/ CATALOGUE > Release 8.5 > Valves Series RFU - RFO Flow control valves Series RFU - RFO Unidirectional and bidirectional flow control valves Ports: M5, G1/8, G1/4, G3/8 and G1/ Nominal diameter: M5 = 1,5

More information

VACUUM REGULATORS CONTENTS

VACUUM REGULATORS CONTENTS CAD drawing data catalog is available. ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS CONTENTS Small Regulators Features 759 Specifications, Order Codes, Flow Rate

More information

Mounting and Operating Instructions EB EN. Type Supply Pressure Regulator. with increased air capacity

Mounting and Operating Instructions EB EN. Type Supply Pressure Regulator. with increased air capacity Type 4708-45 Supply Pressure Regulator with increased air capacity Translation of original instructions Mounting and Operating Instructions EB 8546-1 EN Edition March 2016 Note on these mounting and operating

More information

ALF400 to 900, ALT-5/-9

ALF400 to 900, ALT-5/-9 Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Auto feed lube 00 00-0 00 00 00 900 - --IS- -9 AIR : OIL : Fluid Proof pressure Air. MPa 0. MPa.0 MPa (Note ) Operating pressure differential

More information

Maximum 0.85 MPa pressure setting Long-life, high flow perfect for balancer applications

Maximum 0.85 MPa pressure setting Long-life, high flow perfect for balancer applications Outstanding performance in extremely low pressure and low pressure ranges from 0.003 to. Realizing high performance, energy saving, and compact size. Realize precise pressure control in a pressure range

More information

Precision Regulator. Series Model Regulating pressure range Port size Page

Precision Regulator. Series Model Regulating pressure range Port size Page Precision Regulator Series // Basic Type Air Operated Type Series Model Regulating pressure range Page Series Series Series Series Series.5 to MPa. to MPa. to.8 MPa /8 55.5 to MPa. to MPa /4 55. to.8 MPa.

More information

Auto Feed Lube, Auto Feed Tank ALF400 to 900, ALT-5/-9

Auto Feed Lube, Auto Feed Tank ALF400 to 900, ALT-5/-9 Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Fluid Proof pressure Operating pressure differential range (Difference between tank pressure and line pressure) Vibration resistance

More information

Mounting and Operating Instructions EB 8546 EN. Supply Pressure Regulator Type Fig. 1 Supply pressure regulators

Mounting and Operating Instructions EB 8546 EN. Supply Pressure Regulator Type Fig. 1 Supply pressure regulators Supply Pressure Regulator Type 4708 Type 4708-5352 on Type 3730 Positioner Type 4708-52 with filter receptacle Type 4708-6252 on Type 3372 ctuator Fig. Supply pressure regulators Mounting and Operating

More information

Smooth Vent Valve. Series XVD XL XL Q D- XVD XGT CYV

Smooth Vent Valve. Series XVD XL XL Q D- XVD XGT CYV Smooth Vent Valve Series Valve / needle valve integrated construction requires only 1/4 the piping space of previous models. Particulates significantly reduced through the use of a metal diaphragm in the

More information

Type Pressure Regulator. for increased air capacity. Fig. 1: Type Pressure Regulator. Mounting and Operating Instructions EB EN

Type Pressure Regulator. for increased air capacity. Fig. 1: Type Pressure Regulator. Mounting and Operating Instructions EB EN Type 4708-45 Pressure Regulator for increased air capacity Fig. 1: Type 4708-45 Pressure Regulator Mounting and Operating Instructions EB 8546-1 EN Edition March 2010 Definition of the signal words used

More information

Hand Valve Series. Push-In Fitting Type Shut-off Valve (Residual Pressure Release Valve) Control Open/Close for Air Supply.

Hand Valve Series. Push-In Fitting Type Shut-off Valve (Residual Pressure Release Valve) Control Open/Close for Air Supply. http://www.pisco.co.jp VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Shut-off Valve (Residual Pressure Release Valve) Hand Valve Series 556 Control Open/Close for Air Supply. Release Residual

More information

Calibrated or locked versions available. TREATMENT > Series MD regulators GENERAL DATA. New

Calibrated or locked versions available. TREATMENT > Series MD regulators GENERAL DATA. New > Series MD regulators Series MD pressure regulators New Ports with interchangeable cartridges: threaded (1/8, 1/4, /8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm Versions: single,

More information

Type 4708 Supply Pressure Regulator

Type 4708 Supply Pressure Regulator Type 478 Pressure Regulator Application pressure regulators used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to. bar ( to 4 psi). to bar (8 to 9 psi)

More information

Operation Manual Air Saver Unit ASV5000 Series

Operation Manual Air Saver Unit ASV5000 Series 9IM-V066-b Operation Manual Air Saver Unit ASV5000 Series Thank you for your choice of Kuroda Pneumatics LTDs product on this time. Please read this operation manual carefully and use the product correctly.

More information

Smooth Vent Valve XVD. Series

Smooth Vent Valve XVD. Series Smooth Vent Valve Series Valve / needle valve integrated construction requires only 1/4 the piping space of previous models. Particulates significantly reduced through the use of a metal diaphragm in the

More information

Regulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K

Regulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K Modular Type Regulator Series R Regulator Series R Model R M5 x.8 ccessory R2 /8, /4 R /4, 3/8 R3 /4, 3/8 R4 /4, 3/8, /2 Pages 36 through 4 Regulator with back flow mechanism Series RK R4-6 R5 R6 R2K RK,

More information

Pneumatic valve islands

Pneumatic valve islands Pneumatic valve islands The MEGA solenoid air operated spool valve JOUCOMATIC offers a concept of solenoid air operated spool valves which can be fitted together to form islands. Due to its new patented

More information

Smooth Vent Valve. XVD Series

Smooth Vent Valve. XVD Series Smooth Vent Valve Series Valve / needle valve integrated construction requires only 1/4 the piping space of previous models. Particulates significantly reduced through the use of a metal diaphragm in the

More information

Series MX pressure regulators 3/

Series MX pressure regulators 3/ CATALOGUE > Release 8.8 > Series MX regulators Series MX pressure regulators MX2 ports: G/8, G1/2, G/4 - MX ports: G/4, G1 Manifold ports: G1/2 (MX2 only) Modular - Available with built-in pressure gauges

More information

Speed Controller Anti-spatter Series

Speed Controller Anti-spatter Series http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Flame-Retardant Spatter-proof 422 Adopting Flame-Retardant Resin (V-). Protective Cover to Protect from Sparks.

More information

Type 4708 Supply Pressure Regulator

Type 4708 Supply Pressure Regulator Type 478 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to.6 bar ( to 4 psi) or. to 6 bar (8 to

More information

(1) Type (2) Thread size (T) (3) Wrench size specification : inch spec. (NPT, UNF) : mm spec. (M, R)

(1) Type (2) Thread size (T) (3) Wrench size specification : inch spec. (NPT, UNF) : mm spec. (M, R) This exhaust needle valve, which comes with silencer, controls the exhaust flow rate. The valve can be attached directly to a solenoid valve where a cylinder or like mechanism has no sufficient space around

More information

Discontinued. Powers Controls. Technical Instructions Document No P25 RV Rev. 1, May, RV 201 Pressure Reducing Valves.

Discontinued. Powers Controls. Technical Instructions Document No P25 RV Rev. 1, May, RV 201 Pressure Reducing Valves. Powers Controls RV 201 Pressure Reducing Valves Description Features Product Numbers Dual Pressure PRV Technical Instructions Document No. 155-049P25 RV 201-1 Single Pressure PRV The RV 201 Pressure Reducing

More information

Type 4708 Supply Pressure Regulator

Type 4708 Supply Pressure Regulator Type 708 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point range 0.5 to bar (8 to 90 psi) The pressure regulator

More information

Series variation. Silencer. High damping effect and 2 types of materials. Applicable cylinder bore size (mm) Effective sectional area (mm 2 )

Series variation. Silencer. High damping effect and 2 types of materials. Applicable cylinder bore size (mm) Effective sectional area (mm 2 ) Series variation High damping effect and types of materials Model / appearance Metering valve with silencer Model no. SMW-6 SMW-8 FMS-M SMW- SMW- (R) M M /8 / /8 / / / / 6 8 Effective sectional area (mm

More information

ALF400 to 900, ALT-5/-9

ALF400 to 900, ALT-5/-9 uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa 0. MPa.0 MPa (Note

More information

Regulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K

Regulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K Modular Type Regulator Series R Regulator Series R Model R M5 x.8 ccessory R2 /8, /4 R /4, 3/8 R3 /4, 3/8 R4 /4, 3/8, /2 Pages 36 through 4 Regulator with back flow mechanism Series RK R4-6 R5 R6 R2K RK

More information

Speed Controller Constant Flow

Speed Controller Constant Flow http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Speed Control Valve for Fixed Flow Rate Speed Controller 440 Adjust Actuator Speed. Suitable for Mass Production

More information

Mounting and Operating Instructions EB 8546 EN. Type 4708 Supply Pressure Regulators. Translation of original instructions. Type Type

Mounting and Operating Instructions EB 8546 EN. Type 4708 Supply Pressure Regulators. Translation of original instructions. Type Type Type 4708 Supply Pressure Regulators Translation of original instructions Type 4708-53 Type 4708-64 Type 4708-12 Mounting and Operating Instructions Edition March 2018 Note on these mounting and operating

More information

Air Saving Valve reduction in 40% air consumption 40% air consumption Air consumption reduction ratio (%) Flow valve Flow valv

Air Saving Valve reduction in 40% air consumption 40% air consumption Air consumption reduction ratio (%) Flow valve Flow valv CAT.ES2-3 A -UK Air Saving Valve 4% reduction in air consumption Cuts air consumption by operating the return stroke at a reduced pressure. valve Pressure Air consumption reduction ratio (%) 4 3 2 1.3.1.15.2.25.3

More information

Piloted Non-Return Valves

Piloted Non-Return Valves ed Non-Return Valves ed non-return valves are designed to protect installations: if the compressed air supply is removed, they lock the air supply to the cylinder, thus maintaining it in position. Product

More information

Measurement of Low GAS & Liquid Flows

Measurement of Low GAS & Liquid Flows Measurement of Low GAS & Liquid Flows The Measurement Measurement with a float in a tapered borosilicate glass tube. Series 2100 with a 100 mm flow tube Series 2150 with a 150 mm flow tube Series 2300

More information

Standard Specifications. Fluid Proof pressure Maximum operating pressure. Regulating pressure range

Standard Specifications. Fluid Proof pressure Maximum operating pressure. Regulating pressure range Manifold Regulator Series ARM000/000 connection methods Standard Specifications Fluid Proof pressure Maximum operating pressure Regulating pressure range Ambient and fluid temperature Fluid Cracking pressure

More information

PRO SINK -R 1 and 2. Dilution system CONTENTS

PRO SINK -R 1 and 2. Dilution system CONTENTS PRO SINK -R 1 and 2 Dilution system CONTENTS 1.0 Product description 2 2.0 Warnings.. 3 3.0 Installation procedure 4 4.0 Plumbing connections 4 5.0 Technical features.. 5 6.0 Maintenance... 6 7.0 Troubleshooting......6

More information

PNEUMATIC PRESSURE CONTROLLERS

PNEUMATIC PRESSURE CONTROLLERS PNEUMATIC PRESSURE CONTROLLERS VARIABLE VOLUME PRESSURE CONTROLLER MODELS: V-1 R AND V-2R The 3D Variable Volume Pressure Controller is available for requirements of 0-1,000 psi and 0-6,000 psi in absolute

More information

Vacuum Saving Valve Series ZP2V How to Order ZP2V A5 03 Connection thread symbol for the pad Male thread connection Symbol Thread Applicable fixed ori

Vacuum Saving Valve Series ZP2V How to Order ZP2V A5 03 Connection thread symbol for the pad Male thread connection Symbol Thread Applicable fixed ori Vacuum Saving Valve Series ZP2V Model Selection Select the quantity of vacuum saving valves that can be used with one vacuum generator. Selection Conditions Work piece: No leakage and several sizes Required

More information

Coiling Tube with Twist-Proof Fitting

Coiling Tube with Twist-Proof Fitting http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Anti-Twisting Coiling Tube for Air Tool Coiling Tube with Twist-Proof Fitting 306 Avoid Twisted Tube Problem

More information

4/2 way Pneumatic Solenoid Valve

4/2 way Pneumatic Solenoid Valve 4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11

More information

RP series Rotor Pumps

RP series Rotor Pumps ontact etails RP series Rotor Pumps Nomenclature Features Low noise Substantial reduction of the operation noise, by to db (comparison with aikin products), and improved sound quality are achieved by adopting

More information

Series SFD. Clean Air Filter. Variations. Made to Order. Type. Cartridge (replaceable element) Disposable (non-replaceable element) Up to 100

Series SFD. Clean Air Filter. Variations. Made to Order. Type. Cartridge (replaceable element) Disposable (non-replaceable element) Up to 100 Clean Air Filter Variations SFD SFD SFD SFD Made to Order Type Disposable (non-replaceable element) Cartridge (replaceable element) Flow rate L/min (ANR) (at inlet pressure.7 MPa) Up to 6 Up to 8 Up to

More information

Bermad Pressure Reducing. Model: 42T

Bermad Pressure Reducing. Model: 42T Bermad Pressure Reducing Pilot Operated Pressure Control Valve Model: 42T Installation Operation Maintenance Manual (IOM) REV. 27.7.17 Page 1 of 12 Safety First BERMAD believes that the safety of personnel

More information

PVQ 13 A2 R SE 1 S 20 C-11 D

PVQ 13 A2 R SE 1 S 20 C-11 D PVQ - Variable Displacement Piston Pump PVQ 13 A2 R SE 1 S 2 C-11 D 1 2 3 4 6 7 8 9 1 1 Model Series PVQ Inline Piston Pump Variable Volume Quiet Series 4 Rotation Viewed from shaft end R Right hand, standard

More information

(2) Effective sectional area (no code for mini type) (3) Intake-side shape (no code for mini type) : Quick-fitting joint type : Taper pipe thread type

(2) Effective sectional area (no code for mini type) (3) Intake-side shape (no code for mini type) : Quick-fitting joint type : Taper pipe thread type In response to high-speed drive cylinder. The Quick Exhaust Valve comes with a built-in Quick Fitting. The Valve serves also as a shuttle valve. The exhaust port, having a throttling function, enables

More information

New Product. Air Consumption 70% Down. Precision Regulator Air Saving Type. RPE Series PRECISION REGULATOR RPE SERIES CC-1072A

New Product. Air Consumption 70% Down. Precision Regulator Air Saving Type. RPE Series PRECISION REGULATOR RPE SERIES CC-1072A Air Consumption 70% Down New Product Precision Regulator Air Saving Type RPE Series PRECISION REGULATOR RPE SERIES Large Air Saving CC-1072A Air Consumption 70% Down. New Type Eco-friendly Precision Regulator

More information

Modular Type Regulators

Modular Type Regulators Modular Type Regulators Series AR AC Regulator Series AR Port size Options AFARAL, 1/4 Bracket AFAR AWAL AR4-A, 1/2 Round type pressure gauge With set nut (for panel mount) AFAFMAR P.45 to 5 AR4-6-A ot

More information

shutoff valves 900 Series psig Manual Shutoff Valves

shutoff valves 900 Series psig Manual Shutoff Valves 0 6000 psig Manual Shutoff Valves Features Zero leakage Protected o-ring Full flow passages Freedom from wire drawing Panel mount standard Hand wheel or toggle handle How it Works Closed O-ring seal on

More information

RS(H)10,15 USER MANUAL. Read the complete manual before installing and using the regulator.

RS(H)10,15 USER MANUAL. Read the complete manual before installing and using the regulator. RS(H)10,15 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to

More information

Pneumatic Function Fittings Metric & Inch

Pneumatic Function Fittings Metric & Inch Metric & nch Sensor Fitting Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage Simpler pneumatic systems liminates need for electrical reed switches

More information

Model GP PRESSURE REDUCING VALVE Installation & Operation Manual

Model GP PRESSURE REDUCING VALVE Installation & Operation Manual Model GP-2000 PRESSURE REDUCING VALVE Installation & Operation Manual Please read this bulletin thoroughly before using the pressure reducing valve, so that you may do so correctly and safely. Please carefully

More information

Regulator: Modular Type with Back flow Mechanism. AR30K to 60K. Body size. Port size 1/4 3/8 1/2 3/4 AR40 AR50 3/4 1/2

Regulator: Modular Type with Back flow Mechanism. AR30K to 60K. Body size. Port size 1/4 3/8 1/2 3/4 AR40 AR50 3/4 1/2 Regulator: Modular Type with ack flow Mechanism R3 to 6 How to Order Regulator with a built-in mechanism that ensures a quick release of the outlet air pressure (built-in check valve with back flow mechanism).

More information

Inflatable Packer Single & Double. Single & Double Packer Dimension. Wireline Packer. Water Testing Packer (WTP) Packer

Inflatable Packer Single & Double. Single & Double Packer Dimension. Wireline Packer. Water Testing Packer (WTP) Packer Inflatable Packer Single & Double Single & Double Packer Dimension Wireline Packer Water Testing Packer (WTP) Packer Packer Working Pressure & Depth Chart Packer Water Hand Pump Packer Air Driven Pump

More information

for Building facilities Industrial facilities etc.,multipurpose Pilot operated type(high capacity)

for Building facilities Industrial facilities etc.,multipurpose Pilot operated type(high capacity) for Building facilities Industrial facilities etc.,multipurpose Pilot operated type(high capacity This is a Pilot operated pressure reducing valve. It is suitable to install in the steam lines with the

More information

Precision Regulator. IR1000/2000/3000 Series ARJ ARX AMR ARM ARP IR -A IR IRV VEX SRH SRP SRF ITV IC ITVH ITVX PVQ VY1 AP100.

Precision Regulator. IR1000/2000/3000 Series ARJ ARX AMR ARM ARP IR -A IR IRV VEX SRH SRP SRF ITV IC ITVH ITVX PVQ VY1 AP100. Precision Regulator //3 Series Basic Type Air Operated Type Series Model Set pressure range Port size Page Series Series 3 Series 3 3 3 Series 3 Series 3.5 to MPa. to MPa. to.8 MPa /8 8.5 to MPa. to MPa.

More information

Booster Regulator/Air Tank

Booster Regulator/Air Tank Booster Regulator/Air Tank Increase factory air pressure by up to 4 times! Air-only operation requires no power supply, reduces heat generation, and Boost pressure allows easy installation. NEW Renewed

More information

LMU100/200 Series. Standard Specifications

LMU100/200 Series. Standard Specifications Mist Spray Unit MU/ Series Intermittent spray to cutting and press gear chains, etc. Standard Specifications Inlet air Oil tank set range Oil Dynamic viscosity of oil ( C) Oil tank capacity (cm ) mbient

More information

Push-In Fitting Type Silencer

Push-In Fitting Type Silencer http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type 540 Reduce Exhaust Noise from Exhaust Port. Excellent Silencing Effect. Selection from 3 types. Push-In Fitting

More information

SPCH/ Blowing block

SPCH/ Blowing block > > for linear stretch blow moulding machines > > Compact and safe design > > Best suited for PET bottles up to litres, depending on cycle time Technical features Medium: Compressed air (purity class 3..3

More information

Pressure Dump Valve Service Kit for Series 3000 Units

Pressure Dump Valve Service Kit for Series 3000 Units Instruction Sheet Pressure Dump Valve Service Kit for Series 000 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00, 400, 500, and 700 applicator

More information

Push-In Fitting Type Pressure Gauge

Push-In Fitting Type Pressure Gauge http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type 526 Compact Design. Pressure Indication by Tube Insertion into Push-In Fitting. Check Valve Silencer Controller

More information

(1) Name of tube (2) Tube dia. (O.D./I.D.) (3) Tube length. (4) Tube color. Model UD0425. UD1290 O.D. I.D. (mm) UD1075 UD0860 UD

(1) Name of tube (2) Tube dia. (O.D./I.D.) (3) Tube length. (4) Tube color. Model UD0425. UD1290 O.D. I.D. (mm) UD1075 UD0860 UD The polyurethane tube, featuring excellent flexiblity, helps compact piping requiring small bending radius. The useful cut marks at 500mm interval are printed on the tube. Model UD0425 UD0640 UD0860 UD1075

More information

ALF400 to 900, ALT-5/-9

ALF400 to 900, ALT-5/-9 uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa Max. operating pressure

More information

Pressure relief valve, direct operated Type DBD

Pressure relief valve, direct operated Type DBD Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly echnologies neumatics Service Automation Mobile Hydraulics RE 25 402/06.02 Replaces: 03.98 Material No.: 00772632a ressure

More information

Regulator/Modular Style AR1000 to 6000

Regulator/Modular Style AR1000 to 6000 Regulator/Modular Style AR000 to 6000 Can be combined with a modular style air filter and lubricator A rich variety of models enables precise and stable pressure settings to meet user needs Drain cock

More information

Index Table. Model 794. Installation, Operating and Maintenance Instructions

Index Table. Model 794. Installation, Operating and Maintenance Instructions CLOCKWISE MANUAL MAKING INTO CCW TABLE Index Table Model 794 Installation, Operating and Maintenance Instructions Black & Webster Products Division 545 Hupp Ave. P.O. Box 831, Jackson, Michigan 49204 2009

More information

Series IRV1000/2000/3000

Series IRV1000/2000/3000 CAT.ES60-16 A Regulator Series /2000/3000 Allows adjustment of vacuum line pressure Regulator Series /2000/3000 3 sizes offered in the series Variations have been expanded to three sizes from only one

More information

Regulator for 2 MPa ARX 20. How to Order. Bracket. Pressure gauge. Port size 1/8 1/4. Panel nut

Regulator for 2 MPa ARX 20. How to Order. Bracket. Pressure gauge. Port size 1/8 1/4. Panel nut Regulator for 2 MPa RX 2 How to Order RX2 1 Regulator 1 Regulating pressure.5 to.85mpa {.51 to 8.7kgf/cm²}.5 to.3mpa {.51 to 3.1kgf/cm²} Thread type Nil N F Rc(PT) NPT (PF) Port size 1 2 ccessories/options

More information

ALE-40. R06 Miniature Brass Body Regulator. Water and Compressed Air Service 1/8" and 1/4" PTF Port Sizes. Air line equipment.

ALE-40. R06 Miniature Brass Body Regulator. Water and Compressed Air Service 1/8 and 1/4 PTF Port Sizes. Air line equipment. Air line equipment R Miniature Brass Body Regulator Water and Compressed Air Service 1/" and 1/" PTF Port Sizes Compact design, corrosion resistant construction Brass body with choice of plastic or brass

More information

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS 0/05 OPERATING INSTRUCTIONS for gas pressure regulators PN0 with integrated slam shut valve (SSV) and integrated limited capacity safety relief valve (RV) MR 25 F0, MR 25 SF0 p e 20 kpa - 0 MPa (0,2-0

More information

Pressure regulators Manually operated Fine setting valves. Brochure

Pressure regulators Manually operated Fine setting valves. Brochure Pressure regulators Manually operated s Brochure Pressure regulators Manually operated s Qn = 9 l/min Actuating element: Push button Internal thread Poppet valve Qn = 9 l/min Actuating element: Push button

More information

How to Order. Finger material. Carbon steel 1 Stainless steel. Dust cover material Chloroprene rubber (CR) Fluoro rubber (FKM) Silicon rubber (Si)

How to Order. Finger material. Carbon steel 1 Stainless steel. Dust cover material Chloroprene rubber (CR) Fluoro rubber (FKM) Silicon rubber (Si) Wedge Cam Operation lide Guide Air Gripper (2 inger) ø2, ø, ø2, ø2 How to Order tandard model 2 2 D N ong stroke model 2 2 D N Number of fingers 2 2 fingers Number of auto switches _ 2 D C 2 2 2 Bore size

More information

Model GPR Primary Pressure Regulating Valve. Instruction Manual

Model GPR Primary Pressure Regulating Valve. Instruction Manual Model GPR-2000 Primary Pressure Regulating Valve Instruction Manual Please read this instruction manual thoroughly before using the primary pressure regulating valve, so that you may do so correctly and

More information

Applicable Tubing. Nylon, Soft nylon, Polyurethane, other soft plastic tubing ø4, ø6, ø8, ø10, ø12. Model TM-04 TM-06 TM-08 TM-10 TM-12

Applicable Tubing. Nylon, Soft nylon, Polyurethane, other soft plastic tubing ø4, ø6, ø8, ø10, ø12. Model TM-04 TM-06 TM-08 TM-10 TM-12 Multi-tube Holder TM Series Easy arrangement of tubing Easy tube insertion and firm fixation Possible to separate options depending on number of connection tubes Use of flame resistant resin (Equivalent

More information

How to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø

How to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note

More information

Dual position solenoid valve Type ICSH 25-80

Dual position solenoid valve Type ICSH 25-80 Data sheet Dual position solenoid valve Type ICSH 25-80 ICSH dual position solenoid valve belongs to the ICV family and consists of an ICV housing, an ICS insert together with an ICSH top cover with 2

More information

Air Operated Hydraulic Pumping Systems to 50,000 psi

Air Operated Hydraulic Pumping Systems to 50,000 psi High Pressure Equipment Air Operated Hydraulic Pumping Systems to 50,000 psi PS-10: 10,000 psi PS-20: 20,000 psi PS-30: 30,000 psi PS-40: 40,000 psi PS-50: 50,000 psi PS-90: 90,000 psi High Pressure air

More information

(1) Type (2) Cylinder dia. (3) Gripper action : Single-acting closing gripper (normally open) (4) Holder type

(1) Type (2) Cylinder dia. (3) Gripper action : Single-acting closing gripper (normally open) (4) Holder type These are air finger models featuring light weight and miniature size. Blank fingers are available for the K type fingers as option. R-guide leaves no possibility of misalignment. The blank finger can

More information

Hand lever valves VHER

Hand lever valves VHER Hand lever valves VHER Hand lever valves VHER Key features Powerful Flexible Practical -M- Flow 170 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised Connections:

More information

Model 7989T Steel Pipe Squeezer Sch. 40 & Sch. 80. Operations Manual

Model 7989T Steel Pipe Squeezer Sch. 40 & Sch. 80. Operations Manual 10-12 Steel Pipe Squeezer Sch. 40 & Sch. 80 Operations Manual 1.0 Introduction This manual is issued as a basic operation manual covering the Regent Model 7989T, Pipe Squeezer and Pump as manufactured

More information

Pressure decay sensor Pressure decay sensor Flow at 90 psi (6 bars) Tripping point at 90 psi (6 bar) supply Connection Mechanical life Relay C

Pressure decay sensor Pressure decay sensor Flow at 90 psi (6 bars) Tripping point at 90 psi (6 bar) supply Connection Mechanical life Relay C Position Detectors Order/Technical Support Tel: (800) 6773 / FAX: (800) 677386 / www.crouzetusa.com / Pressure decay sensor Pressure decay sensor 8 04 02 Flow at 90 psi (6 bars) Tripping point at 90 psi

More information

Differential pressure control and flow limiter AVPB/AVPB-F, PN 16

Differential pressure control and flow limiter AVPB/AVPB-F, PN 16 Data sheet Differential pressure control and flow limiter AVPB/AVPB-F, PN 16 Application AVPB is a self-acting differential pressure control and flow limiter primarily for use in district heating systems.

More information

F l o w c o n T R o l v a l v E S

F l o w c o n T R o l v a l v E S Composite Right Angle Flow Control Valves Series TMCU-TMVU-TMCO- BSP/METRIC Meter In, Meter Out, Needle Orifice G1/8, G1/, G3/8, G1/2 Banjo flow controllers Nominal diameters Ø 2-3.8-5.8-8 The Meter In,

More information

Pressure Independent Control Series

Pressure Independent Control Series Document No. 155-522 Pressure Independent Control Series Two-Way Cast Iron Flanged Bodies, ANSI 125 and 250 Description Siemens Pressure Independent Control Valves integrate three functions into a single

More information