MATERIAL SAFETY DATA SHEET

Transcription

1 MATERIAL SAFETY DATA SHEET Bromophenol Blue 0.04% w/v Solution SECTION 1. Product and Company Idenfication Product Name and Synonym: Bromophenol Blue 0.04% w/v Solution Product Code: BDH 7392 Material Uses: ANACHEMIA CHEMICALS, LLC Manufacturer: 3 Lincoln Blvd. Rouses Point, NY (518) (281) Entry Date : 07/11/2012 Health: 0 Flammability: 0 Reactivity: 0 Hazard Rating: Least Slight Moderate High Extreme NA=Not Applicable NE=Not Established Print Date: 07/11/ Hour Emergency Assistance : Chemtrec Canutec SECTION 2 HAZARD IDENTIFICATION Generally not hazardous in normal handling, however good laboratory practices should always be used. Avoid long term exposure to skin or by inhalation. SECTION 3 MIXTURE COMPONENTS Physical state: Liquid Odor: Odorless While this material is not considered hazardous by the OSHA Hazard Communication Standard (29 CFR ), this MSDS contains valuable critical to the safe handling and proper use of the product. This MSDS should be retained and for employees and other users of this product. Emergency overview: CAUTION! Handle with care in keeping with safe laboratory practices. Routes of entry: Inhalation. Ingestion. Eyes: No known significant effects or critical hazards. Skin: No known significant effects or critical hazards. Inhalation: No known significant effects or critical hazards. Ingestion: No known significant effects or critical hazards. Carcinogenicity: No known significant effects or critical hazards. Mutagenicity: No known significant effects or critical hazards. Teratogenicity/ Reproductive toxicity: No known significant effects or critical hazards. SARA 313 Component CAS Number Percent Comp. Dimension Bromophenol Blue Sodium Salt CAS# % W/W Exposure Limits None established Water, Deionized ASTM Type II CAS# >99% W/W None Established SECTION 4 FIRST AID MEASURES Generally not hazardous in normal handling, however good laboratory practices should always be used. Avoid long term exposure to skin or by inhalation. FIRST AID: SKIN: Wash exposed area with soap and water. If irritation persists, seek medical attention.

2 EYES: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. If symptoms persist, seek medical aid. INHALATION: Remove to fresh air. If not breathing, give artificial respiration. Seek medical attention. INGESTION: Get medical attention if symptoms occur. Wash out mouth with water. Move exposed person to fresh air. If exposed person is conscious, give small quantities of water to drink. Do not induce vomiting unless directed to do so by medical personnel SECTION 5 FIRE FIGHTING MEASURES Fire Extinguisher Type: Any means suitable for extinguishing surrounding fire None Fire / Explosion Hazards: Fire Fighting Procedure: SECTION 6 ACCIDENTAL RELEASE MEASURES SECTION 8 EXPOSURE CONTROLS/PERSONAL PROTECTION Respiratory Protection: Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing. Absorb spill with inert material, then place in a chemical waste container. Dispose of in a manner consistent with federal, local law. Personal precautions: Immediately contact emergency personnel. Keep unnecessary personnel away. Use suitable protective equipment. Environmental precautions: Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Methods for cleaning up: If emergency personal are un, contain spilled material. For small spills, add absorbent (soil may be used in the absence of other suitable materials), scoop up material and place in a sealable, liquid-proof container for disposal. For large spills, dike spilled material or otherwise contain material to ensure runoff does not reach a waterway. Place spilled material in an appropriate container for disposal. SECTION 7 HANDLING AND STORAGE Store in a cool dry place. Do not get in eyes, on skin, on clothing. Wash thoroughly after handling Ventilation Protective Gloves: None required Local Exhaust Mechanical Eye Protection: Safety Glasses w/ Side Shields Other Protective Equipment: Gloves to prevent skin exposure as rubber or vinyl Use safe laboratory handling procedures. Consult local authorities for acceptable exposure limits. Engineering measures: No special ventilation requirements. Good general ventilation should be sufficient to control airborne levels. If this product contains ingredients with exposure limits, use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure blow any recommended or statutory limits. Personal Protection Page 2 of 5

3 SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES Eyes: Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. Recommended: safety glasses w/ side shields Skin: Personal protective equipment for the body should be selected based on the task being performed and risks involved and should be approved by a specialist before handling this product. Body recommended: lab coat and gloves Respiratory: Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. Hands: Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. Hygiene measures: Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location. Melting Point: Boiling Point: ~0 C ~100 C Percent Volatile by Volume: >99% Evaporation Rate Information not Vapor Pressure: Evaporation Standard Vapor Density: Auto Ignition Temp not Solubility in Water: Soluble Lower Flamm. Limit in Air not Appearance /Odors: Clear blue odorless liquid Upper Flamm. Limit in Air not Flash Point: Specific Gravity: SECTION 10 STABILITY AND REACTIVITY INFORMATION Stability: Conditions to Avoid: Materials to Avoid: Hazardous Decomposition Products: Hazardous polymerization: Stable Avoid contact with incompatible materials. None known Bromine, Bromine compounds Will Not Occur Conditions to Avoid: None known Page 3 of 5

4 SECTION 11 Toxicological Information Toxicity data Other toxic effects on humans: No specific is in our database regarding the other toxic effects of this material to humans. Specific effects Carcinogenic effects: No known significant effects or critical hazards. Mutagenic effects: No known significant effects or critical hazards. Teratogenicity/Reproductive toxicity: No known significant effects or critical hazards. Sensitization SECTION 12 SECTION 13 Ingestion: No known significant effects or critical hazards. Inhalation: No known significant effects or critical hazards. Eyes: No known significant effects or critical hazards. Skin: No known significant effects or critical hazards. Ecological Information Environmental effects : No known sighificant effects or critical hazards. Toxicity of the products of biodegradation: The products of degradation are less toxic than the product itself. Disposal Considerations Waste disposal: the generation of waste should be avoided or minimized wherever possible. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Disposal of this product, solutions and any by-product should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Disposal should be in accordance with applicable regional, national and local laws and regulations. Local regulations may be more stringent than regional or national requirements. SECTION 14 Transport Information DOT Classification: Not Regulated DOT Regulations may change from time to time. Please consult the most recent D.O.T. regulations. SECTION 15 Regulatory Information United States HCS Classification: Not regulated U.S. Federal regulations: United States inventory (TSCA 8b): listed SARA 302/304/311/312 extremely hazardous substances: No products were found. SARA 302/304 emergency planning and notifications: No products were found. SARA 302/304/311/312 hazardous chemicals: No products were found. SARA 311/312 MSDS distribution- Chemical inventory- hazard identification: No products were found. Clean Water Act (CWA) 307: No products were found. Clean Water Act (CWA) 311: No products were found. Clean Air Act (CAA) 112 accidental release prevention: No products were found Clean Air Act (CAA) 112 regulated flammable substance: No products were found. Clean Air Act (CAA) 112 regulated toxic substance: No products were found State regulations: New Jersey: Bromophenol Blue 0.04% Canada WHMIS (Canada) : Not controlled under WHMIS (Canada). CEPA DSL/ CEPA NDSL : CEPA DSL: Water This product has been classified in accordance with the hazard criteria of the CPR and the Page 4 of 5

5 SECTION 16 Additional Information MSDS contains all the required by the CPR. Flammability Health Reactivity Revisions NFPA 07/11/ Review date for MSDS. STN The herein is believed to be accurate and is offered in good faith for the user's consideration and investigation. No warranty either expressed or implied is made for the completeness or accuracy of the whether originating from the above mentioned company or not. Users of this material should satisfy themselves by independent investigation of current scientific and medical knowledge that the material can be used safely. Page 5 of 5