Manufacturer : DuPont Performance Elastomers L.L.C Bellevue Park Corporate Center, 300 Bellevue Parkway Wilmington, Delaware 19809
|
|
|
- Sophia West
- 5 years ago
- Views:
Transcription
1 This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Product Grade/Type : SAX-7459, SAX-7464, GBPL200i, 10, 40 MSDS Number : Product Use : Process aid for polyolefins Manufacturer : DuPont Performance Elastomers L.L.C Bellevue Park Corporate Center, 300 Bellevue Parkway Wilmington, Delaware Product Information : (outside the U.S ) Medical Emergency : (outside the U.S ) Transport Emergency : CHEMTREC: (outside the U.S ) SECTION 2. HAZARDS IDENTIFICATION Potential Health Effects Eyes Barium sulfate : May irritate eyes. Dust may cause:, mechanical irritation with tearing, pain or visual impairment. Inhalation Polyvinylidenefluoride/h exafluoropropene : Inhalation of decomposition products from overheating may cause lung irritation or shortness of breath. Fluid in the lungs (pulmonary oedema) with cough, wheezing, abnormal lung sounds, possibly progressing to severe shortness of breath and bluish discoloration of the skin (symptoms might be delayed) Repeated exposure Barium sulfate : lung effects Target Organs 1 / 9
2 Barium sulfate : Lungs Carcinogenicity None of the components present in this material at concentrations equal to or greater than 0.1% are listed by IARC, NTP, or OSHA, as a carcinogen. SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS Component CAS-No. Concentration Polyvinylidenefluoride/hexafluoropropene >98% Barium sulfate <1 % SECTION 4. FIRST AID MEASURES Skin contact : Wash off with soap and water. Cool skin rapidly with cold water after contact with hot polymer. Do not peel polymer from the skin. Consult a physician if necessary. Eye contact Inhalation Ingestion General advice : Rinse thoroughly with plenty of water, also under the eyelids. Consult a physician. : Move to fresh air in case of accidental inhalation of fumes from overheating or combustion. Consult a physician. : If victim is conscious: Drink water as a precaution. Consult a physician. : If symptoms persist, call a physician. 2 / 9
3 SECTION 5. FIRE-FIGHTING MEASURES Flammable Properties Flash point : > 204 C (> 399 F) open cup Fire and Explosion Hazard Suitable extinguishing media Firefighting Instructions : Burning produces noxious and toxic fumes. : Carbon dioxide (CO2), Foam, Water, Dry chemical : Wear self-contained breathing apparatus and protective suit. Wear neoprene gloves during cleaning up work after a VITON fire. Evacuate personnel to safe areas. Do not allow run-off from fire fighting to enter drains or water courses. The solid polymer can only be burned with difficulty. SECTION 6. ACCIDENTAL RELEASE MEASURES NOTE: Review FIRE FIGHTING MEASURES and HANDLING (PERSONNEL) sections before proceeding with cleanup. Use appropriate PERSONAL PROTECTIVE EQUIPMENT during clean-up. Safeguards (Personnel) : Ventilate the area. Refer to protective measures listed in sections 7 and 8. Spill Cleanup Accidental Release Measures : Shovel into suitable container for disposal. Clean contaminated floors and objects thoroughly while observing environmental regulations. : Try to prevent the material from entering drains or water courses. SECTION 7. HANDLING AND STORAGE Handling (Personnel) : Protect from contamination. Provide appropriate exhaust ventilation at dryers, machinery and at places where dust or volatiles can be generated. In case of insufficient ventilation, wear suitable respiratory equipment. Do not breathe dust. Do not breathe fumes evolved from hot polymer. General precaution for all plastics and elastomers: Wash hands before breaks and immediately after handling the product. Regular cleaning of equipment, 3 / 9
4 work area and clothing. When using do not eat, drink or smoke. Handling (Physical Aspects) Storage : General precaution for all plastics and elastomers: Take necessary action to avoid static electricity discharge (which might cause ignition of organic vapours). Avoid dust formation. : Keep in a dry, cool and well-ventilated place. Keep containers dry and tightly closed to avoid moisture absorption and contamination. SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Engineering controls : Use only in area provided with appropriate exhaust ventilation. Personal protective equipment Respiratory protection Hand protection Eye protection Skin and body protection : Where there is potential for airborne exposures in excess of applicable limits, wear NIOSH approved respiratory protection. : Material: Nitrile rubber Glove thickness: 0.38 mm Wearing time: 8 h Additional protection: Skin should be washed after contact. : Safety glasses with side-shields : If there is a potential for contact with hot/molten material wear heat resistant clothing and footwear. If VITON is used above 315 C the surface may contain hydrogen fluoride condensate which may cause severe burns. In this case wear neoprene gloves. Exposure Guidelines Exposure Limit Values Hydrogen fluoride (anhydrous) PEL: (OSHA) 2.5 mg/m3 8 hr. TWA as F PEL: (OSHA) 3 ppm TWA TLV (ACGIH) 0.5 ppm TWA as F TLV (ACGIH) 2 ppm TLV-C as F 4 / 9
5 Skin designation Skin designation Barium sulfate PEL: (OSHA) 5 mg/m3 8 hr. TWA Respirable fraction. PEL: (OSHA) 0.5 mg/m3 8 hr. TWA as Ba PEL: (OSHA) 15 mg/m3 8 hr. TWA Total dust. TLV (ACGIH) 10 mg/m3 TWA AEL * (DUPONT) 10 mg/m3 8 & 12 hr. TWA Total dust * AEL is DuPont's Acceptable Exposure Limit. Where governmentally imposed occupational exposure limits which are lower than the AEL are in effect, such limits shall take precedence. SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES Form : pellets, powder Color : white, off-white Odor : none Density : g/cm3 Water solubility : insoluble SECTION 10. STABILITY AND REACTIVITY Conditions to avoid : Processing temperature > 300 C (> 572 F) Avoid heating for prolonged periods above the recommended upper processing limit. Incompatibility Hazardous decomposition products : Powdered metals Finely divided aluminium, Alkali metals, Alkaline earth metals : Hazardous decomposition products Hydrogen fluoride, Carbonyl fluoride, Fluorinated hydrocarbons, Fluorinated olefins 5 / 9
6 Hazardous reactions : Polymerization will not occur. During drying, cleaning and moulding, small amounts of hazardous gases and/or particulate matter may be released. These may irritate eyes, nose and throat. SECTION 11. TOXICOLOGICAL INFORMATION Polyvinylidenefluoride/hexafluoropropene Dermal : No adverse effects expected. Oral ALD : > 5,000 mg/kg, rat Skin irritation : non-irritant Skin sensitization : Not a skin sensitizer. Repeated dose toxicity : Inhalation No adverse effects expected. Oral No adverse effects expected. Carcinogenicity : No adverse effects expected. Mutagenicity : No adverse effects expected. Reproductive toxicity : No adverse effects expected. Teratogenicity : No adverse effects expected. Barium sulfate Oral LD50 : > 5,000 mg/kg, rat Skin irritation : human non-irritant Skin sensitization : Patch test on human volunteers did not demonstrate sensitization 6 / 9
7 properties., human Repeated dose toxicity : Inhalation animals (unspecified species) lung effects Mutagenicity : Evidence suggests this substance does not cause genetic damage in animals. Information given is based on data obtained from similar product. SECTION 12. ECOLOGICAL INFORMATION Aquatic Toxicity Polyvinylidenefluoride/hexafluoropropene : This product has no known eco-toxicological effects. 48 h EC50 : Daphnia magna (Water flea) > 205 mg/l Additional ecological information : We have no quantitative data concerning the ecological effects of this product. SECTION 13. DISPOSAL CONSIDERATIONS Waste Disposal : If recycling is not practicable, dispose of in compliance with local regulations. Can be landfilled or incinerated, when in compliance with local regulations. Incinerate only in incinerators capable of scrubbing out acidic combustion products. Environmental Hazards : Offer rinsed packaging material to local recycling facilities. If recycling is not practicable, dispose of in compliance with local regulations. SECTION 14. TRANSPORT INFORMATION Not classified as dangerous in the meaning of transport regulations. 7 / 9
8 SECTION 15. REGULATORY INFORMATION EINECS Status : On the inventory, or in compliance with the inventory TSCA Status : In compliance with TSCA Inventory requirements for commercial purposes. AICS Status : On the inventory, or in compliance with the inventory DSL Status : On the inventory, or in compliance with the inventory ENCS (JP) Status : On the inventory, or in compliance with the inventory KECI (KR) Status : On the inventory, or in compliance with the inventory PICCS (PH) Status : On the inventory, or in compliance with the inventory INV (CN) Status : On the inventory, or in compliance with the inventory SARA 313 Regulated Chemical(s) California Prop. 65 PA Right to Know Regulated Chemical(s) : SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313. : Chemicals known to the State of California to cause cancer, birth defects or any other harm: none known : Substances on the Pennsylvania Hazardous Substances List present at a concentration of 1% or more (0.01% for Special Hazardous Substances): No components present on the PA state hazardous substance lists. NJ Right to Know Regulated Chemical(s) : Substances on the New Jersey Workplace Hazardous Substance List present at a concentration of 1% or more (0.1% for substances identified as carcinogens, mutagens or teratogens): No components present on the NJ state hazardous substance lists. SECTION 16. OTHER INFORMATION Restrictions for use: Do not use in medical applications involving permanent implantation in the human body. For other medical applications see DuPont Performance Elastomer's caution bulletin No. H Before use read DuPont Performance Elastomer's safety information. Registered trademark of DuPont Performance ElastomersThe information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is 8 / 9
9 not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. Significant change from previous version is denoted with a double bar. 9 / 9
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Neoprene polychloroprene
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Material: Mosites #2902 Version 1.0 Revision Date:
Version 1.0 Revision Date: 1-22-15 Section 1 Product and Company Identification Trade Name Mosites #2902 Product Group Aflas Fluoroelastomer Manufacturer Mosites Rubber Company 2720 Tillar Street Fort
Tefzel ETFE FLUOROPOLYMERS
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Material: Mosites #60412 Version 1.0 Revision Date:
Section 1 Product and Company Identification Trade Name Mosites #60412 Product Group Neoprene polychloroprene Manufacturer Mosites Rubber Company 2720 Tillar Street Fort Worth, Texas 76107 USA Customer
ZODIAQ Quartz Surfaces
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Tefzel ETFE fluoroplastics
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
KEVLAR brand engineered elastomer
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
AF Amorphous Fluoroplastic resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Tefzel ETFE Conductive Fluoropolymer
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Tefzel ETFE Conductive Fluoroplastic
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Tefzel ETFE Fluoroplastic
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
PTFE Fluoroplastic Resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
PFA Fluoroplastic Resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
FEP Fluoroplastic Resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont Tyvek ThermaWrap R5.0
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont RelyOn Antiseptic Hand Gel
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
FEP Fluoroplastic resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
FEP Fluoroplastic Resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont Krytox GPL 21(X) Series Greases
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont Sealant for Tyvek Fluid Applied System
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
ZODIAQ Quartz Surfaces
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries. DuPont Page 1 "HYTREL" POLYESTER ELASTOMERS ALL IN
Krytox PFPE/PTFE Greases with Soluble Additive
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont Krytox PFPE/PTFE Greases with Soluble Additive
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries. DuPont Page 1 "ZODIAQ" QUARTZ SURFACES COR009 Revised
Krytox PFPE/PTFE Greases (GPL 20(X) Series)
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Krytox PFPE/PTFE Greases with Soluble Additive
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Krytox 240 Series Greases
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Krytox Sodium Nitrite Inhibited PFPE/PTFE Greases (GPL 22(X) Series)
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont Krytox PFPE Oils
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Krytox NRT 8908 Paste
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont Krytox 143 Series Oils
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
1-Octene, polymer with ethene (cas ) MSDS
Click http://www.guidechem.com/cas-262/26221-73-8.html for suppliers of this product 1-Octene, polymer with ethene (cas 26221-73-8) MSDS The MSDS format adheres to the standards and regulatory requirements
: Tefzel ETFE fluoropolymers
This SDS adheres to the standards and regulatory requirements of Great Britain and may not meet the regulatory requirements in other countries. 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Material Safety Data Sheet Nomex
Material Safety Data Sheet Nomex SECTION 1: Identification of the Substance/mixture and of the Company/Undertaking Product Grade/Type: Yarn, Staple, Fabric, Floc, Tow Tradename/Synonym: formerly MSDS#
Corian Solid Surface Material
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont Page 1 Material Safety Data Sheet
DuPont Page 1 "CORIAN" PRODUCTS, SILICONE SEALANT ALL COLORS COR005 Revised April 7, 2011 Printed 7-APR-2011 CHEMICAL PRODUCT/COMPANY IDENTIFICATION Material Identification Corian is a registered trademark
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont StoneTech Professional Semi Gloss Finishing Sealer
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont Tyvek Fluid Applied WB
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
1.2. Relevant identified uses of the substance or mixture and uses advised against (INT)
Revision date: 01/11/2015 SECTION 1: Identification of the substance/mixture 1.1. Product identifier Product form Substance name : Substance Formula : CaCO 3 Molecular weight : : 100.09 g/mol CAS No. :
Krytox Sodium Nitrite Inhibited PFPE/PTFE Greases (GPL 22(X) Series)
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont Ti-Pure Titanium Dioxide Pigment - Paint Coatings - Dry Grades
This SDS adheres to the standards and regulatory requirements of Canada and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Product
Krytox RFE PFPE High Performance Lubricant
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Material Safety Data Sheet
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name Product Use Description Lubricant Company Manufacturer Anderol Specialty Lubricants, a division of Chemtura Corporation 215 Merry Lane East Hanover,
: : Sontara Old Hickory, Inc. 326 Swinging Bridge Rd. Old Hickory, TN 37138
Safety Data Sheet This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory Requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET 1 PRODUCT AND COMPANY IDENTIFICATION Product Name: Manufacturer Name: Federal-Mogul Corporation 26555 Northwestern Highway Southfield, Michigan 48034 U.S.A. Intended Use: Industrial
Issue Date: March 27, 2017 Revision Date: March 27, 2017 Version: PRODUCT AND COMPANY IDENTIFICATION
SAFETY DATA SHEET Issue Date: March 27, 2017 Revision Date: March 27, 2017 Version: 2017 Product Name: Slip Stop Other Means of Identification SDS #: F6523 1. PRODUCT AND COMPANY IDENTIFICATION Recommended
CAS-No. EC-No. Index-No. Concentration Cellulose May be harmful if inhaled. May cause respiratory tract irritation.
SIGMA-ALDRICH Material Safety Data Sheet Version 3.0 Revision Date 01/03/2009 Print Date 03/23/2011 1. PRODUCT AND COMPANY IDENTIFICATION Product name : -Cellulose Product Number : C8002 Brand : Sigma
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET 1. PRODUCT AND COMPANY IDENTIFICATION PARALOID# K-120N Processing Aid Supplier Rohm and Haas Company 100 Independence Mall West Philadelphia, PA 19106-2399 USA Revision date:
Material Safety Data Sheet. 1. Identification of the substance/preparation and of the company/undertaking
Page: 1/6 1. Identification of the substance/preparation and of the company/undertaking Product name: KODAK PHOTO-FLO 200 Solution Product code: 1464502 Supplier: EASTMAN KODAK COMPANY, 343 State Street,
MATERIAL SAFETY DATA SHEET
1. Identification of the substance/ mixture and of the company/ undertaking Product identifier Product description: Synthetic oil (ester oil with additives) Order number: Number Package Size L21001 1 Liter
Not a dangerous substance or mixture according to the Globally Harmonized System (GHS).
1. PRODUCT AND COMPANY IDENTIFICATION Product name : IRDye 700 Phosphoramidite Part Number(s) : 830-05368, 4200-33, 4200-34 Brand : LI-COR Identified uses : Laboratory chemicals, Manufacture of substances
Material Safety Data Sheet
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name: Product Use Description: Lubricant Company: Manufacturer Anderol Specialty Lubricants, a division of Chemtura Corporation 215 Merry Lane East
Scientific Polymer Products, Inc.
Scientific Polymer Products, Inc. www.scipoly.com SAFETY DATA SHEET Revision Date: 10/27/16 Section 1: Identification PRODUCT AND COMPANY INFORMATION Product Name: Polypropylene, isotactic, chlorinated
19146 Telephone Hours of operation: Monday Friday, 9:00 am 6:00 pm
P a g e 1 3401 Grays Ferry Avenue, Building 176, Philadelphia PA 19146 Website: www.allevi3d.com Email: info@allevi3d.com Safety Data Sheet 1. Identification Product Name Sodium Alginate Substance/Mixture
Scientific Polymer Products, Inc.
Scientific Polymer Products, Inc. www.scipoly.com SAFETY DATA SHEET Revision Date: 12/06/16 Section 1: Identification PRODUCT AND COMPANY INFORMATION Product Name: Propylene glycol monostearate Molecular
SIGMA-ALDRICH. Material Safety Data Sheet Version 5.0 Revision Date 01/17/2012 Print Date 01/29/2014
SIGMA-ALDRICH sigma-aldrich.com Material Safety Data Sheet Version 5.0 Revision Date 01/17/2012 Print Date 01/29/2014 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Mueller Hinton Agar Product Number
Safety Data Sheet Prepared on 04/07/2016 This form is subject to changes
Safety Data Sheet Prepared on 04/07/2016 This form is subject to changes 1. Identification of substance: Product Name: Flake Graphite Product Number(s): FLAKE-GRAPH CAS-No. 7782-42-5 Manufacturer/Supplier:
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries. DuPont Page 1 "ZYTEL" POLYAMIDE RESINS ON SYNONYM
Version 1.3 Revision Date 08/18/2014 Print Date 04/13/2018. : Honeywell International Inc. 115 Tabor Road Morris Plains, NJ
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name : MSDS Number : Product Use Description : Personal care Manufacturer or supplier's details : Honeywell International Inc. 115 Tabor Road Morris
Material Safety Data Sheet
Material Safety Data Sheet 1. MATERIAL IDENTIFICATION Material Name: Uses: Glass Cleaner Product Code: 5071268 Emergency Telephone Number Transport / Spill Information: (CHEMTREC) 1-800-424-9300, Local:
Distributor : Continental Industries Group, Inc. 733 Third Avenue Fl. 20 Tel:
Safety Data Sheet www.continental-industries.com 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Sodium bicarbonate Version 1.0 Creation Date 01/15/2015 Distributor : Continental Industries Group,
Scientific Polymer Products, Inc.
Scientific Polymer Products, Inc. www.scipoly.com SAFETY DATA SHEET Revision Date: 05/10/16 Section 1: Identification PRODUCT AND COMPANY INFORMATION Product Name: Poly(vinyl buytral) Molecular Formula:
Safety Data Sheet. (L-Aspartic Acid) L-Aspartic Acid DATE PREPARED: 3/6/2017. Section 1. Product and Company Identification
Section 1. Product and Company Identification L-Aspartic Acid Product Name CAS Number 56-84-8 Parchem - fine & specialty chemicals 415 Huguenot Street New Rochelle, NY 10801 (914) 654-6800 (914) 654-6899
ELVAMIDE 8061 nylon multipolymer resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
This SDS adheres to the standards and regulatory requirements of Japan and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of Japan and may not meet the regulatory requirements in other countries. 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
Issue Date: 01-Nov-2013 Revision Date: 06-Apr-2015 Version 2 1. IDENTIFICATION 2. HAZARDS IDENTIFICATION
Safety Data Sheet Issue Date: 01-Nov-2013 Revision Date: 06-Apr-2015 Version 2 1. IDENTIFICATION Product Identifier Product Name Other means of identification SDS # Deluxe Deodorizing Urinal Screen IP-040
Safety Data Sheet. Section 2. Hazards Identification
LKT Laboratories, Inc. Safety Data Sheet Section 1. Product and Company Identification Product Name Fumagillin Product ID F8048 Chemical Name (Synonyms) Supplier Emergency Phone # 1-800-424-9300 Amebacilin;
DuPont StoneTech Professional Enhancer
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Safety Data Sheet. (Sodium Chloride) Sodium Chloride DATE PREPARED: 3/7/2016. Section 1. Product and Company Identification
Section 1. Product and Company Identification Sodium Chloride Product Name CAS Number 7647-14-5 Parchem - fine & specialty chemicals 415 Huguenot Street New Rochelle, NY 10801 (914) 654-6800 (914) 654-6899
Ref Product name : Corian Solid Surface Product Use : sheets and shaped articles, For professional users only.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont Penetrating Sealers
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Safety Data Sheet. Trade Name: RNase A. Revision Date: 12/30/2016 SECTION 1. IDENTIFICATION OF PRODUCT AND COMPANY: RNase A
SECTION 1. IDENTIFICATION OF PRODUCT AND COMPANY: Product Name: RNase A Manufacturer or Supplier Details: Company Name: Address: Norcross, GA 30071 USA Telephone: 1-800-832-8896 Email: Emergency Telephone:
DuPont StoneTech Professional Enhancer product
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Safety Data Sheet. Section 1. Product and Company Identification. Section 2. Hazards Identification
LKT Laboratories, Inc. Safety Data Sheet Product Name Product ID Chemical Name (Synonyms) Supplier R-(+)-Ofloxacin O2146 Section 1. Product and Company Identification S-(-)-Ofloxacin; Levofloxacin; Tavanic;
Material Safety Data Sheet
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name: Product Use Description: Lubricant Chemical nature: Lubricant Company: Manufacturer Anderol Specialty Lubricants, a division of Chemtura Corporation
Associates of Cape Cod, Inc.
1. PRODUCT AND COMPANY IDENTIFICATION 1.1 Product Identifiers Product Name : Pyrotell Product Number : G2003, G2006, G2125, G2250, G5003, G5006, G5125, G5250, and GP5003 1.2 Relevant identified uses of
Associates of Cape Cod, Inc.
1. PRODUCT AND COMPANY IDENTIFICATION 1.1 Product identifiers Product name : Pyrosate Product Number : PSL-0.03, -0.125, and -0.25 1.2 Relevant identified uses of the substance or mixture and uses advised
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
SIGMA-ALDRICH sigma-aldrich.com Material Safety Data Sheet Version 4.3 Revision Date 12/12/2012 Print Date 03/13/2014 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Molecular sieves Product Number
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET PRODUCT: Powder REVISION DATE: 01/09/2008 REVISION NUMBER: 2 Date Printed: 01/09/2008 1. PRODUCT AND COMPANY IDENTIFICATION MANUFACTURED BY: Ferro Corporation 251 West Wylie
DuPont(TM) Tedlar(R) Oriented PVF Film
This document is for information only, provided voluntarily and not subsequent to regulatory requirement. PRODUCT AND CONTACT INFORMATION Product identifier Product name : Synonyms : TBB15BL3; TCD15BL3;
SIGMA-ALDRICH. Material Safety Data Sheet Version 5.7 Revision Date 06/18/2012 Print Date 01/22/2014
SIGMA-ALDRICH sigma-aldrich.com Material Safety Data Sheet Version 5.7 Revision Date 06/18/2012 Print Date 01/22/2014 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Chitosan Product Number : 740500
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
FOR ANY EMERGENCY, 24 HOURS / 7 DAYS, CALL: FOR ALL TRANSPORTATION ACCIDENTS, CALL CHEMTREC : FOR ALL SDS QUESTIONS & REQUESTS, CALL: 1-800-654-6911 (OUTSIDE USA: 1-423-780-2970) 1-800-424-9300 (OUTSIDE
SIGMA-ALDRICH. Material Safety Data Sheet Version 5.0 Revision Date 10/11/2012 Print Date 03/21/2014
SIGMA-ALDRICH sigma-aldrich.com Material Safety Data Sheet Version 5.0 Revision Date 10/11/2012 Print Date 03/21/2014 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Thyroid powder Product Number
Material Safety Data Sheet
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name Product Use Description Lubricant Company Manufacturer Anderol Specialty Lubricants, a division of Chemtura Corporation 215 Merry Lane East Hanover,
SAFETY DATA SHEET. Great Lakes Orthodontics 200 Cooper Ave Tonawanda, NY CHEMTREC:
SAFETY DATA SHEET SECTION 1. INDENTIFICATION Great Lakes Orthodontics 200 Cooper Ave Tonawanda, NY 14150 716-871-1161 800-828-7626 CHEMTREC: 800-424-9300 Product Name: Crème Polish, Lustreshine Product
SIGMA-ALDRICH. Material Safety Data Sheet Version 4.2 Revision Date 07/23/2012 Print Date 02/27/2014
SIGMA-ALDRICH sigma-aldrich.com Material Safety Data Sheet Version 4.2 Revision Date 07/23/2012 Print Date 02/27/2014 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Product Number : 12090 Brand :
Safety Data Sheet. LKT Laboratories, Inc.
LKT Laboratories, Inc. Safety Data Sheet Section 1. Product and Company Identification Product Name Melatonin Product ID M1745 Chemical Name (Synonyms) Supplier Emergency Phone # 1-800-424-9300 Regulin;
Safety Data Sheet. (Chitosan) Chitosan DATE PREPARED: 6/24/2015. Section 1. Product and Company Identification. Product Name CAS Number
Section 1. Product and Company Identification Chitosan Product Name CAS Number 9012-76-4 Parchem - fine & specialty chemicals 415 Huguenot Street New Rochelle, NY 10801 (914) 654-6800 (914) 654-6899 parchem.com
SAFETY DATA SHEET. Disposal considerations : Dispose of wastes in an approved waste disposal facility.
Material number 1016027 Page Page 1 of 8 SECTION 1. IDENTIFICATION Product name : 5301-2 Frit 50LB BAG 000000000001016027 Product code : RS_FP_600330 Manufacturer or supplier's details Company name of
SIGMA-ALDRICH. Material Safety Data Sheet Version 4.1 Revision Date 04/05/2011 Print Date 08/31/2011
SIGMA-ALDRICH sigma-aldrich.com Material Safety Data Sheet Version 4.1 Revision Date 04/05/2011 Print Date 08/31/2011 1. PRODUCT AND COMPANY IDENTIFICATION Product name : β-carotene Product Number : C9750
: Trim-Kut Grinding Disc
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Trim-Kut Grinding Disc 1.2. Relevant identified uses of the substance or mixture
Material Safety Data Sheet BIOGUARD BALANCE PAK 200
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name: Product Use Description: Recreational Water Product Chemical nature: Alkaline Salts Registration number: 5185-50033 Company: Bio-Lab, Inc. BioGuard
Use only for the purpose on the product label.
SAFETY DATA SHEET SOLID SANITIZER Section 1. Chemical product and company identification Product name Recommended use and restrictions SOLID SANITIZER Sanitizer. Use only for the purpose on the product