Presented by John Whale Control Banding as a Potential Alternative to Risk Assessment
|
|
- Isabella Eaton
- 5 years ago
- Views:
Transcription
1 Presented by John Whale Control Banding as a Potential Alternative to Risk Assessment AUSA National Conference Sydney 2009
2 Background Monash s current risk control program has been in place for over 6 years An system review of the document was scheduled for 2009 Issues with the current system lead OHS to investigate other potential methods of assessing and controlling hazards
3 Changes to Victorian Regulations - In 2007 a change to the Victorian OHS Regulations - Emphasis removed from risk assessment of hazards and put on to control implementation - Hierarchy of controls remains prominent feature of methodology - Primarily use of Substitution, Isolation and Engineering in combination with: - Secondary controls of Administrative and PPE
4 Review of Monash s Current System Strategic focus (compliance) has been mainly on assessment component. Inadequate or outstanding controls from prior assessments (assessment the priority) Many generic assessments exist which may have little to do with the true risks or controls required for the hazards. Inadequate controls selected or picking down the Hierarchy for the risk level
5 Current Monash Method of Assessment - Consequence Vs Likelihood Matrix. - Matrices are tailored to Hazard type. - Some calculation or estimation of factors required within the hazard type. - Controls are determined by the person doing the analysis.
6 Common flaws Choosing an incompatible control based on assessors knowledge Possibility of choosing a lower control for expediency, downtime of project or cost. Reassessment of risk with new controls may under or over estimate the control effectiveness. (leaving process vulnerable or unusable)
7 Likelihood Consequence Matrix Likelihood of injury after current controls are considered Consequence Highly Likely Likely Occasionally Unlikely Highly Unlikely Major Injury Extreme Extreme High High High Severe Injury Extreme High High High Medium Moderate Injury High High Medium Medium Medium Minor Injury High Medium Medium Medium Low Negligible Injury Medium Medium Medium Low Low
8 Pitfalls with Standard Matrix Individuals may score Consequence and Likelihood differently Ambiguity with end score significance Possibly no reduction of risk score so process is perceived as futile Similar scores for tasks which are obviously dissimilar in risk Control may be over or under represented as a solution
9 Considerations for a Reviewed Model What is the driver behind Hazard control? Are most Hazard and control combinations known? Do hazardous activities generally fall into control categories? Do we currently exercise multiple levels of control? Do we promote redundancy and duplicity? How do we get the most out of the Control Hierarchy?
10 Control Banding Concept Focus remains on the elimination or substitution of hazards System which incorporates both Monash University endorsed protocols, Regulatory Codes and Australian Standards. Relate Hazards directly to the selection of known controls. Use of a hazard specific matrix as well as incorporating a table of control solutions
11 Hazard Control Process Eliminate or reduce hazards through Substitution Identify Hazard Categories Identify opportunities within each category to eliminate or substitute For each outstanding hazard identify: Dependent variables within the hazard category Control band based on the variables Controls required for the hazard Current controls and implement those remaining.
12 Reduce Hazard Eliminate: Redesign, do not use or do Substitute: Use a less hazardous alternative Determine Hazard Classes As either physical or energy, Chemical, Biological, radiation or manual handling No Is Hazard Eliminated Yes Reduce Hazard in each class Eliminate: Redesign, do not use or do Substitute: Use a less hazardous alternative Select Primary Controls from Tables Isolate hazards from the person or person from the Hazard Use Engineering Controls to protect against the hazard No Is Hazard Eliminated Yes Select Secondary Controls from Tables Administrative controls such as procedures, training and signage Personal Protective Equipmen to reduce the impact of the hazard and as a last line of defence Develop Emergency Controls To reduce the impact or aid recovery of a primary or secondary control breach. Isolation, shutdown and contingencies Document process Use Hazard Control Sheets as well as using information in Safe Work Procedures and Manuals
13 Hazard Bands 1. Low hazard level with predominantly secondary level controls 2. Moderate hazard level with the use of some primary as well as secondary controls 3. High hazard level and multiple primary and secondary controls 4. Unacceptable hazard level, no controls or facilities (internally) available and need for external / independent review
14 Laser Hazards Example Hazard Reference Model Laser Class Control level Class 1 & 2 Class 1M,2M & 3R Class 3B & Laser Model Noise
15 Hazard Group D & E Amount 0.5 g or ml > 0.5 g or ml & 20 kg or L > 20 kg or L Inhalation Risk Rating (IRR) Hazard Control Level Low 3 Med/High 2 All 3 Low/Med 3 High g or ml All 1 C Concentrate > 0.5 g or ml & 0.5 kg or L Dilute (<5% of haz sub) > 0.5 g or ml & 0.5 kg or L >0.5 kg or L & <20 kg or L > 20 kg or L All 2 All 1 All 2 Low/Med 2 High g or ml All 1 A & B > 0.5 g or ml & 20 kg or L > 20 kg or L All 2 Low 2 Med/High 3
16 Control Group Description Processes with a low risk of serious injury to Processes with a medium risk of serious injury Processes with a high risk of serious injury or the operator or those potentially exposed to to the operator or those potentially exposed to fatality to the operator or those potentially the Chemical. the Chemical. exposed to the Chemical. Engineering: General ventilation should be of a good standard. This includes natural ventilation or controlled ventilation where air is removed by a powered fan As per Control Band One Use all hazardous substances inside a fume hood/cupboard Cold rooms typically have full recirculation of air and thus are not suitable Fume hood if work may impact on others in area (respirator for individuals) Where possible use Fume hood or cupboard or extraction Administration: Ensure all staff are provided with information regarding the hazards associated with the substance/s in use Ensure those using substances have completed a Dangerous Goods & Hazardous Substances training course Consult the Material Safety Data sheet (MSDS) before commencing work Ensure a Safe Operating Procedure/Safe work Instruction is developed for all procedures As per Control Band One and in addition. As per Control Band Two and in addition. Ensure all unattended reactions are clearly labeled Keep the sash down as far as possible (at or below yellow diamond/ white label) Alert colleagues to your activities so they may also take precautions Ensure comprehensive training on the process to be undertaken has been given/received Refer to OHS INFORMATION SHEET 13: Use of Local Exhaust Ventilation Systems & Fume Cupboards Place lids on containers immediately after use Ensure all requirements for licenses, permits or notification to use the chemical are met Store chemicals in accordance with the Monash Chemical Storage Guidelines All staff/students must be confident and competent before being allowed to perform tasks unsupervised Consumption or storage of food and/or drink in the laboratory/workshop is prohibited Consider whether after hours work will be required and if so, develop and after hours procedures Ensure good housekeeping standards are practiced at all times and ensure all containers are affixed with a compliant label (Product name, concentration, DG code if applicable, date and decanter s name) Dispose of all wastes as per the MSDS and waste disposal guidelines where applicable Personal Protective Equipment (PPE): Minimum PPE to be worn at all times -laboratory coat/dust coat/coveralls, safety glasses, closed toe footwear and gloves Ensure Personal Protective Equipment (PPE) is appropriate for the task and chemical As per Control Band One and in addition. Use all hazardous substances with an appropriate respirator As per Control Band One
17 Possible Limitations of Control Banding Dynamic or evolving tasks or tasks which occur in dynamic environment ie maintenance, installations, field trips, one off activities Activities which may require scrutinizing of procedures i.e. entry into confined spaces. Tasks which may have competing or multiple hazards / control options Physico-chemical reactivity hazards Emerging Technologies where hazards and controls are not yet defined Psychological injury control
18 Conclusions Current risk assessment methodology of a likelihood and consequence matrix has known pitfalls and limitations Control banding may be a simple way of bridging the knowledge gap between an identified known hazards and acceptable levels of control Monash now moving into pilot phase of project.
19 Questions?
THE NEED FOR A NEW SYSTEM OF MANAGING HAZARDS
Hazard Identification and Control Banding as a Potential Alternative to Risk Assessment John J Whale Monash University Occupational Health and Safety Unit Email: john.whale@eng.monash.edu.au ABSTRACT Monash
More informationSTFC QUANTITATIVE RISK ASSESSMENT PRO-FORMA
Ref: Description: Assessment Date: Location/Site: Assessor: Department: Assessment Team:: Persons Exposed: Activity/Task: Step 1 What are the hazards? Step 2 Who might be harmed and how? What are you already
More informationFaculty/School: Faculty of Pharmacy Initial Issue Date: Oct 2016
Use this form to assist you to complete risk assessments for hazardous activities and processes. Any serious or ongoing hazards should be reported via RiskWare to ensure that appropriate corrective actions
More informationTo comply with the OHS Act, the responsible manager must carry out and document the following:
Owner: Manager Health, Wellbeing and Safety Last Update: 10 January 2018 Contents 1. Purpose... 1 2. Minimum Compliance Requirements... 1 3. Definitions... 2 4. Legislative requirements under the OHS Act
More informationFaculty/School: Pharmacy Initial Issue Date: Oct 2016
Use this form to assist you to complete risk assessments for hazardous activities and processes. Any serious or ongoing hazards should be reported via RiskWare to ensure that appropriate corrective actions
More informationProcedure: Work health and safety hazard management
Procedure: Work health and safety hazard management Purpose This procedure describes how the Australian National University (ANU) manages Work Health Safety hazards for the health, safety, rehabilitation
More informationRisk Management Program March 2015
AS/NZS 4801 OHSAS 18001 OHS20309 SAI Global Risk Management Program March 2015 Introduction Monash University s Victorian campuses are all governed by the Victorian OHS Act 2004 and its subordinate regulations
More informationUniversity College Dublin Machinery/Equipment Risk Assessment Template
1. General Information Name of Person(s) carrying out assessment and their position Principal Investigator / Supervisor / Head of School or Unit (Person responsible for ensuring safety) Date of assessment
More informationHazard Management Making your workplace safer
Hazard Management Making your workplace safer A Guide to Hazard Identification, Risk Assessment, Control and Reviewing 1 What is a hazard? A hazard is something which has the potential to harm the health,
More informationFACULTY OF EDUCATION LOW RISK HEALTH AND SAFETY FORM FORM B
FACULTY OF EDUCATION LOW RISK HEALTH AND SAFETY FORM FORM B Research Projects Date / / Faculty of Education Staff/Student No. Research Project Information Circle the appropriate research activity pertaining
More informationMarine Education Society of Australasia HAZARD MANAGEMENT POLICY
Marine Education Society of Australasia HAZARD MANAGEMENT POLICY Purpose of guidelines Commitment to workplace health and safety Scope Legal Framework MESA is committed to ensuring safe and healthy working
More informationHazard & Risk Management
Hazard & Risk Management Introduction The Church recognises WHS hazards and risks must be appropriate managed to ensure, so far as reasonably practicable, the health and safety of all workers at Church
More informationCOMPLETION OF PROCEDURE ASSESSMENT FORM (COSHH RELATED) GUIDANCE NOTES (Version 3)
COMPLETION OF PROCEDURE ASSESSMENT FORM (COSHH RELATED) GUIDANCE NOTES (Version 3) The following guidance notes accompany the College Procedure Assessment form (COSHH-related). Please complete all applicable
More informationRisk Assessment for: Fume cupboards
School of Design Faculty of Performance, Visual Arts and Communications Risk Assessment for: Fume cupboards Assessment No: 117 PROCESS / ACTIVITY LOCATION ASSESSED BY DATE(S) Carrying out activities that
More informationHAZARD RECOGNITION EVALUATION and CONTROL
What is a hazard? HAZARD RECOGNITION EVALUATION and CONTROL Hazard - a dangerous object, event, behaviour or condition (in the workplace) which has the potential to cause injury, illness or property damage.
More informationUse, storage and disposal of flammable liquids
Use this form to assist you to complete risk assessments for hazardous activities and processes. Any serious or ongoing hazards should be reported via RiskWare to ensure that appropriate corrective actions
More informationGeneral Requirements for Personal Protective Equipment
3.10.1 OVERVIEW This section describes procedures for ensuring that employees, students and visitors are protected from hazards through the use of personal protective equipment (PPE). (WAC 296-800-160)
More informationFaculty/School: Pharmacy Initial Issue Date: Oct 2016
Use this form to assist you to complete risk assessments for hazardous activities and processes. Any serious or ongoing hazards should be reported via RiskWare to ensure that appropriate corrective actions
More informationBiomedical Laboratory: Its Safety and Risk Management
Biomedical Science Letters 2017, 23(3): 155~160 https://doi.org/10.15616/bsl.2017.23.3.155 eissn : 2288-7415 Review Biomedical Laboratory: Its Safety and Risk Management Tin Tun Singapore Association for
More informationHS329 Risk Management Procedure
HS329 Risk Management Procedure Work Health and Safety Act 2011 Policy hierarchy link Work Health and Safety Regulation 2011 Work Health and Safety Policy Code of Practice How to Manage Work Health and
More informationPOLICY FOR COSHH (CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH) POLICY
POLICY FOR COSHH (CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH) POLICY Written By: Nursery Manager Date approved by Directors: Signature: Date for Review: November 2018 COSHH (CONTROL OF SUBSTANCES HAZARDOUS
More informationWORK METHOD STATEMENT TERMITE PROTECTION
ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone
More informationEHS-SWP-140. Safe Work Practice. Animal Projects with Chemicals. 1.0 Hazard Description
EHS-SWP-140 This document is to be used when completing the hazard assessment portion of an Animal Use Protocol. Safe Work Practice Animal Projects with Chemicals 1.0 Hazard Description Chemicals utilized
More informationFaculty/School: Faculty of Pharmacy Initial Issue Date: Oct 2016
Use this form to assist you to complete risk assessments for hazardous activities and processes. Any serious or ongoing hazards should be reported via RiskWare to ensure that appropriate corrective actions
More informationIIUM EVENT SAFETY RISK ASSESSMENT
INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA HAZARD IDENTIFICATION OCCUPATIONAL WORKPLACE SAFETY, HEALTH AND BUILT ENVIRONMENT DEPARTMENT (OSHBE) PRESENTED BY: YBHG. DATO IR. SHAFFEI MOHAMAD IIUM EVENT SAFETY
More informationWestern Sydney University Safety Inspection Checklist - Laboratory Environments
Western Sydney University Safety Inspection Checklist - Laboratory Environments Useful Hint: To maximise the benefits that can be gained from a workplace inspection activity read the Western Sydney University
More informationOccupational Health & Safety
Personal Development Level 3 Occupational Health & Safety Any injury particularly workplace injury is a major cause of concern for all involved in Occupational Health and Safety (OHS). The factors which
More informationHazard Assessment & Control. Faculty of Veterinary Medicine
Hazard Assessment & Control Faculty of Veterinary Medicine Emergency Evacuation In the event of an emergency Primary exit is to the. Secondary exit is to the. Assembly point is at. Campus Security Emergency
More informationBHC-P-07.2 Health Hazards in Construction
BHC-P-07.2 Health Hazards in Construction Contents 1.0 Purpose 2.0 Scope 3.0 Definitions 4.0 Main requirements 5.0 Guidance documents and references 6.0 Appendices Revision Register Date Version Description
More informationAntony Ward. List of Legislation, Code of Practice, Australian Standards, Guidance Materials used to determine control measures
Use this form to assist you to complete risk assessments for hazardous activities and processes. Any serious or ongoing hazards should be reported via RiskWare to ensure that appropriate corrective actions
More informationSH&E Work Method Statement Concrete Cutting & Drilling Fast Cut Qld Pty Ltd, 91 Basalt, GEEBUNG PH M ABN
SH&E Work Method Statement Concrete Cutting & Drilling Fast Cut Qld Pty Ltd, 91 Basalt, GEEBUNG PH 07 3265 6537 M 0411 756 719 ABN 45 081 359 613 OHS-FRM-100 Rev 11 (07/18) Page 1 SH&EWMS No.: F-C-QLD-30
More information-JHA- Job. For Science and Engineering. Hazard Assessment
-JHA- For Science and Engineering Job Hazard Assessment Is a Job Hazard Assessment Necessary? The Occupational Safety and Health Administration regulations confirm a JHA is needed. OSHA 1910.132(d)(2)
More informationRecognition, Evaluation, and Control of Hazards
Recognition, Evaluation, and Control of Hazards Latest revised date: October 26, 2011 Page 1 of 8 1.0 Introduction Memorial University has established a system for the recognition, evaluation, and control
More informationManagement of risk. Definition of terms. Managing risks. Risk
Definition of terms Risk Management of risk Risk is the possibility that harm (death, injury or illness) might occur when exposed to a hazard. A hazard is anything with the potential to cause injury or
More informationWHS Guidelines Working with Chemicals
WHS Guidelines Working with Chemicals 1. Scope These guidelines are applicable to all environments where are used. The purpose of this document is to detail minimum requirements for working with, to list
More informationa) Accident/Incident investigation. REACTIVE MEASURE
General Risk Assessment In order to prevent workplace injury, disease or property damage, it is necessary to identify the causes of accidents and failures in management control, which can lead to such
More informationDate: Review Date: Assessment Reference: Experiment or Procedure (include a brief description, including equipment used and frequency of exposure):
Date: Review Date: Assessment Reference: Workers involved: Experiment or Procedure (include a brief description, including equipment used and frequency of exposure): Phytolith extraction from soil, separation
More informationRISK ASSESSMENT AND HAZARD CONTROL
Title: Risk Assessment & Hazard Control Effective Date: 11/17/2014 Control Number: THG_0056 Revision Number: Date: Annual Review Completed: 5/13/2015 RISK ASSESSMENT AND HAZARD CONTROL CONTENTS I. INTRODUCTION
More informationFaculty/School: Faculty of Pharmacy Initial Issue Date: Oct 2016
Use this form to assist you to complete risk assessments for hazardous activities and processes. Any serious or ongoing hazards should be reported via RiskWare to ensure that appropriate corrective actions
More informationRISK ASSESSMENT FORM Project / Work Description: Handling of furniture.
Department & Exact Location Of The Work Performed: RISK ASSESSMENT FORM Project / Work Description: Handling of furniture. Risk Assessment Team (Name/s): Date Conducted: Approved By Supervisor / Reporting
More informationAccidents and accident prevention
Accidents and accident prevention What is an accident? 1. Oxford Dictionary An unforeseeable event often resulting in injury. 2. British Safety Council A management error; the result of errors or omissions
More informationWORK METHOD STATEMENT STRUCTURAL STEEL
ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone
More informationThe modern, fast and easy to use risk analysis tool. Advanced Features. Using HAZID in BowTie Pro
The modern, fast and easy to use risk analysis tool Advanced Features Using HAZID in BowTie Pro Enterprise Business Centre Admiral Court Poynernook Road Aberdeen, AB11 5QX, UK Tel: +44 (0) 1224 51 50 94
More information11/7/2011. Chemical Hazards and Controls for Rehabilitation Professionals. What is a chemical hazard? Toxicology. Module 3
Chemical Hazards and Controls for Rehabilitation Professionals Module 3 What is a chemical hazard? A chemical hazard is a chemical that, because of its characteristics and effects, may cause harm to an
More informationTOPIC ONE: HAZARD IDENTIFICATION AND CONTROL
TOPIC ONE: HAZARD IDENTIFICATION AND CONTROL Sea Eagle Publications, 2008 1 Definition of Hazard Hazard: This is a present or potential danger, visible or not visible. This can apply to: substances: such
More informationLaboratory Self Inspection Checklist LAB01
Laboratory Self Inspection Checklist LAB01 General Chemical/Biological Laboratories Location Assessor Date This core checklist is provided by the Health and Safety Department as a template, which provides
More informationAppendix A: Induction check list
Appendix A: Induction check list Name This checklist is to be completed as part of inducting a new user in the Laboratory. Permission to begin work in the Laboratory will only be given once all relevant
More informationCOSHH Assessment Form
COSHH Assessment Form This assessment only addresses the risk of harm to health from the substances listed. Additional risk assessments may be required to control the risk from other hazards associated
More informationRisks and Hazards Identified Now What?
Risks and Hazards Identified Now What? Minnesota Safety Council Safety & Health Conference Minneapolis Convention Center May 9, 2018 3:40 p.m. - 4:45 p.m. Presented by: Cynthia Braun, CSP, CHMM, CET Braun
More informationTelco Antennas SWMS Working At Height Above 2m
Telco Antennas SWMS Working At Height Above 2m A SWMS shall be developed for a task where the risk has been assessed as Medium or Higher Division: Date: SWMS No: (e.g. Installation, Engineering Workshop)
More informationGuidance: HSW Risk Assessment Methodology HSW-PR09-WI01. Objective. Implementation
1.0 Objective This Work Instruction is designed to assist in the assessment of health and safety and wellbeing (HSW) risk and suggested controls associated with hazards identified while working throughout
More informationWork Health & Safety Event Safety Checklist Small Event
Note: This checklist relates to the Bedford Park site and contains information specific to that site. Other sites can use the checklist but may need to adapt the information. This documentation must be
More informationSelect the forms you want to complete by clicking in the check boxes. You may choose one or more forms to complete
Select the forms you want to complete by clicking in the check boxes. You may choose one or more forms to complete Select the School or Professional Service and the Department you belong to from the drop-down
More informationFaculty/School: Psychology Initial Issue Date: 27/08/2015 Next Review Date: 27/08/2017 Risk Assessment Reference Number: LCMS_0001.
Use this form to assist you to complete risk assessments for hazardous activities and processes. Any serious or ongoing hazards should be reported via RiskWare to ensure that appropriate corrective actions
More informationWORK METHOD STATEMENT CARPET LAYING
ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone
More informationFaculty/School: Faculty of Pharmacy Initial Issue Date: Oct 2016
Use this form to assist you to complete risk assessments for hazardous activities and processes. Any serious or ongoing hazards should be reported via RiskWare to ensure that appropriate corrective actions
More informationCity University of Hong Kong. Health and Safety Risk Assessment for Workstations, Experiments and Research Projects
City University of Hong Kong Health and Safety Risk Assessment for Workstations, Experiments and Research Projects Objective The objective of risk assessment is to perform a careful examination of what
More informationHealth & Safety Policy HSP 08 Control of Substances Hazardous to Health (COSHH) Version Status Date Title of Reviewer Purpose/Outcome
Health & Safety Policy HSP 08 Control of Substances Hazardous to Health (COSHH) Version Status Date Title of Reviewer Purpose/Outcome 1.0 Draft 07.03.2016 David Maine 1 st Draft for consultation/review
More informationSTANDARD OPERATING PROCEDURES (SOP) FOR REPRODUCTIVE HAZARDS
STANDARD OPERATING PROCEDURES (SOP) FOR REPRODUCTIVE HAZARDS INTRODUCTION: Standard operating procedures (SOP) are intended to provide you with general guidance on how to safely work with a specific class
More informationFIELDWORK RISK ASSESSMENT FORM
FIELDWORK RISK ASSESSMENT FORM SECTION 1: GENERAL DETAILS AND APPROVAL FIELDWORK DETAILS Fieldwork type: Undergraduate Postgraduate Research Other: Fieldwork description: Subject name (if applicable):
More informationFaculty/School: Pharmacy Initial Issue Date: Oct Dr. Alpesh Patel and Padmaja Dhanvate
Use this form to assist you to complete risk assessments for hazardous activities and processes. Any serious or ongoing hazards should be reported via RiskWare to ensure that appropriate corrective actions
More informationWHMIS 1988 & WHMIS 2015
WHMIS 2015 Awareness AN AWARENESS PROGRAM ON THE UPDATED Workplace Hazardous Materials Information System WHMIS 1988 & WHMIS 2015 WHMIS Overview 2 WHMIS Overview WHMIS first came into effect on October
More informationWork Health and Safety Risk Management Procedures
Work Health and Safety Risk Management Procedures Table of Contents 1. Governing Policy 2. Purpose 3. Scope 4. Definitions 5. Responsibilities 6. Risk Management Process 6.1. Process summary 6.2. Hazard
More informationPOLICY ON THE PROVISION & USE OF PERSONAL PROTECTIVE EQUIPMENT
POLICY ON THE PROVISION & USE OF PERSONAL PROTECTIVE EQUIPMENT June 2013 Lead Manager John Green, Health & Safety Service Manager Responsible Director Director of Human Resources Approved By Health and
More informationRISK ASSESSMENT A UNIVERSITY GUIDE TO PRACTICAL RISK ASSESSMENT UNDER THE MANAGEMENT OF HEALTH AND SAFETY AT WORK REGULATIONS 1992
RISK ASSESSMENT A UNIVERSITY GUIDE TO PRACTICAL RISK ASSESSMENT UNDER THE MANAGEMENT OF HEALTH AND SAFETY AT WORK REGULATIONS 1992 PERSONNEL DIVISION REVIEWED AUTUMN 1999 CONTENTS Page 1 INTRODUCTION 1
More informationCONTROL OF SUBSTANCES HAZARDOUS TO HEALTH PROCEDURE
CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH PROCEDURE 1. INTRODUCTION The University uses substances hazardous to health in many of its operations, and accepts that it has a duty of care to reduce exposure
More informationWHS F029 Job Safety Analysis (JSA) and volume less than 10m2
Handling Archaeological Asbestos Fragments Non-friable Title and volume less than 10m2 School/Business Unit Humanities Location (building/lab/ workshop if applicable) JSA Development 9 June 2017 JSA Development
More informationHazardous substance risk management
November 2017 H E A LT H & S A F E T Y AT WO R K HSWA AC T QUICK GUIDE Hazardous substance risk management KEY FACTS You must proactively manage the risks that come from having hazardous substances in
More informationFaculty/School: Pharmacy Initial Issue Date: Oct 2016
Use this form to assist you to complete risk assessments for hazardous activities and processes. Any serious or ongoing hazards should be reported via RiskWare to ensure that appropriate corrective actions
More informationThis guidance explains what hazards and risks are and provides an overview of requirements under the Health and Safety at Work Act 2015 (HSWA).
Hazards and risks Health and Safety at Work Act (2015) Guidance Last updated: 31 May 2017 What this guidance contains This guidance explains what hazards and risks are and provides an overview of requirements
More informationESTATES OFFICE OPERATIONS WORKS INSTRUCTIONS WI 6. Fume Cupboards, Ventilated Cabinets, Local Exhaust Ventilation
ESTATES OFFICE OPERATIONS WORKS INSTRUCTIONS WI 6 ISSUE RECORD Revision Description Updated Date Compiled by Review date 01 Modified Mar 2010 J Cummins Mar 2011 02 Reviewed Aug 2011 J Cummins Aug 2012
More informationHazardous substances compliance tools
z Hazardous substances compliance tools 1. Identify hazardous substances - MSDS - Register 2. Assess risks - Record 5. Review - MSDS - Risk assessments - New chemicals Consult 3. Control risks - Refer
More informationLABORATORY HAZARD AWARENESS TRAINING
Open minds. Open doors. TM LABORATORY HAZARD AWARENESS TRAINING FOR NON LABORATORY PERSONNEL Objectives Hazard Awareness Be familiar with the hazards, warning signs and labels Protective measures PPE Training
More informationTHE CONTROLLED COPY OF THIS DOCUMENT IS ON THE COMPUTER NETWORK PRINTED COPIES ARE ONLY CURRENT FOR THE DATE AT THE BOTTOM OF THE PAGE.
TE CONTROLLED COPY OF TIS DOCUMENT IS ON TE COMPUTER NETWORK PRINTED COPIES ARE ONLY CURRENT FOR TE DATE AT TE BOTTOM OF TE PAGE. Title Using Angle Grinders SWMS No. 8 Authorized and email Signed by the
More informationWORK METHOD STATEMENT ELECTRICAL
ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone
More informationEnvironmental Health and Public Safety. Graduate Student Safety Training
Environmental Health and Public Safety Graduate Student Safety Training INCIDENT AT DUKE UNIVERSITY Wednesday April 15, 1998 7.51 a.m. EDT Firefighters reported t the Gross Chemical Building after the
More informationGSA POLICY ON LOCAL EXHAUST AND OTHER VENTILATION (FUME CUPBOARDS)
GSA POLICY ON LOCAL EXHAUST AND OTHER VENTILATION (FUME CUPBOARDS) Local Exhaust Ventilation Inspection & Maintenance 1 LOCAL EXHAUST AND OTHER VENTILATION Contents 1. Introduction 2. Design specifications
More informationHAZARDOUS SUBSTANCES / DANGEROUS GOODS
HAZARDOUS SUBSTANCES / DANGEROUS GOODS Golden Brown is committed to continuously improving the management and standards of Occupational health and Safety. This commitment extends to minimising exposure
More informationHazard Training Guide
Hazard Training Guide Using the Main Application v1.5 WHS Version Control Document Title: Hazard Training Guide using the Main Application Document Issue: Version 1.5 Date Issued: 12 Aug 2014 Issue Date
More informationEnvironmental Health and Public Safety. Graduate Student Safety Training
Environmental Health and Public Safety Graduate Student Safety Training Why Do We Care About Safety? >30,000 students/faculty/staff >1,000 research laboratories Chemical, Radiological, Biological Lasers,
More informationa. identify hazardous conditions and potential accidents; b. provide information with which effective control measures can be established;
APPENDIX 2 TO ANNEX E TO SECTION 13 JOB HAZARD ANALYSIS PROCESS 1. The JHA process is an excellent starting point to evaluate the actual way a job is performed. This process may identify specific improvements
More informationLaboratory Inspection Checklist
Date: Time: Inspector(s): Laboratory Information Department Principal Investigator (PI)/Laboratory Instructor PI telephone number PI e-mail address Building Laboratory room number(s) Backup Safety Contact
More informationTASK DAY RISK ASSESSMENT FORM
TASK DAY RISK ASSESSMENT FORM Assessment date Location and Activity details: Site Address Step One - Identify the activity and hazards Consider the activity or work area and identify if any of the hazards
More informationTEMPLE UNIVERSITY A Commonwealth University Environmental Health & Radiation Safety (EHRS)
Page 1 of 8 TEMPLE UNIVERSITY A Commonwealth University Environmental Health & Radiation Safety (EHRS) Standard Operating Procedure (SOP) Bromodeoxyuridine (BrdU) Principal Investigator: Room & Building
More informationEMPLOYEE SAFETY ORIENTATION - PHYSICAL PLANT, RESIDENCE
Name Department Initial Orientation Date Supervisor Review Instructions: Check off each section once you have read and discussed it with your Supervisor. EMPLOYEE SAFETY ORIENTATION - PHYSICAL PLANT, RESIDENCE
More informationWORK METHOD STATEMENT ALUMINIUM WINDOWS AND DOORS
ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone
More informationSafe Work Method Statement Required for all High Risk Activities identified for the Project
Application of Herbicides SWMS #1 Safe Work Method Statement * This column is used to undertake frequent Workplace Audits/Inspection to verify controls are in place. # If a control measure is ongoing indicate:
More informationA GUIDE TO SAFE USE OF GLUTARALDEHYDE
A GUIDE TO SAFE USE OF FOR COLD DISINFECTION OF MEDICAL INSTRUMENTS 3 DECEMBER 2007 This guidance material provides health care facilities with practical advice on how to safely use glutaraldehyde for
More informationRISK MANAGEMENT. Siobhan Mulvenna, GIOSH, FCIPD
RISK MANAGEMENT Siobhan Mulvenna, GIOSH, FCIPD www.smt-solutions.com What is Risk Assessment? Like any other area of your business, health and safety needs to be properly managed. To do this you need to
More informationWH&S Act 2011 & Regulations 2011, Environmental Protection Act and Regulations
Workplace Address: Page 1 of PART 1: TASK DETAILS Client: JOB/TASK: Using Water blaster PART 2: RESOURCES Relevant Legislation/Codes Practice: Training Required: Equipment Used: Materials Used: Substances
More informationJOB SAFETY ANALYSIS. How to use the Risk Assessment Charts. Likelihood A (Almost Certain) B (Likely) C (Possible)
Page 1 of 6 How to use the Assessment Charts 1. Determine the Likelihood on the Qualitative Assessment Process Chart (pick a letter applicable to the task). 2. Determine the Consequence on the Qualitative
More informationEnvironmental Health & Safety Policy Manual
Environmental Health & Safety Policy Manual Issue Date 8/24/2009 Updated: 5/8/2018 Policy # EHS-400.03 Personal Protective Equipment 1.0 PURPOSE: In order to protect the health of employees and students,
More informationSchool of Molecular Bioscience SMB019. Kamrul Zaman
Use this form to assist you to complete risk assessments for hazardous activities and processes. Any serious or ongoing hazards should be reported via RiskWare to ensure that appropriate corrective actions
More informationSAFE WORK METHOD STATEMENT Part 1 CONCRETE SAWING
SAFE WORK METHOD STATEMENT Part 1 CONCRETE SAWING Personal Protective Equipment Foot Hearing High Visibility Head Eye Face Hand Protective Clothing Breathing Normal Requirements: Safety footwear, hearing
More informationEHS Workplace Inspection Checklist (Ref. SOP QMS-080; EHS-010)
(Ref. SOP QMS-080; EHS-010) Form-445 Inspected by: Date of inspection Date of Report Report # Pages Area Manager: Area Inspected: General This EHS Workplace Inspection was conducted by: Scope of the Inspection:
More informationSafe Work Method Statement
Title Skid Steer Operation (Bobcat) SWMS No. 14 Authorized and email Signed by the (Managing Director / CEO / Partner / Proprietor) on Date 01/08 /2016 Safe Work Procedure for the Work:- Yes No Employees
More informationInstructions for the Use of the Excel Spreadsheet. There are Three tabs at the bottom of this worksheet. Instructions tab is the one you are reading
Instructions for the Use of the Excel Spreadsheet There are Three tabs at the bottom of this worksheet Instructions tab is the one you are reading H&S Plan Tab The Plan Tab is the front cover pages of
More informationSafe Work Method Statement LRB TREE SERVICES 6 Behland St, Kearneys Spring QLD, 4350 ABN
JOB NO: PROJECT: DATE: 1/1/2018 SWMS NO: SWMS 001.1 PREPARED BY: LUKE BLINCO REVISED BY: ACTIVITY: TREE REMOVAL & PRUNING SIGNED BY: REVISION DATE: MINIMUM PERSONAL PROTECTIVE EQUIPMENT (PPE) REQUIREMENTS
More informationCourse outline: 111 WH&S E101A UEENEEE101A - Occupational Health and Safety regulations, codes and practices in the workplace
RTO Code 41319 Course outline: 111 WH&S E101A UEENEEE101A - Occupational Health and Safety regulations, codes and practices in the workplace Qualification: Applicable to: Unit of competency: Related policies:
More informationAccident /Incident/Injury Report & Investigation Form
Accident /Incident/Injury Report & Investigation Form Incident Details: Location/s of Incident: Address of Incident: Person Involved Details: Person Involved: Witness Name (If Applicable): Time of Incident
More information