Instruction Manual. ARTÍCULO No. v070910

Size: px
Start display at page:

Download "Instruction Manual. ARTÍCULO No. v070910"

Transcription

1 Instruction Manual Manual 2-in-1 Flooring de Nailer instrucciones / Stapler ITEM NO ARTÍCULO No. v070910

2 THANK YOU for your purchase of this Vulcan Air Tool. With proper care and use you can expect your purchase to provide years of trouble free service! SHOULD YOU HAVE A QUESTION OR A PROBLEM WITH YOUR VULCAN TOOL, PLEASE CALL OUR CUSTOMER SERVICE DEPARTMENT TOLL FREE AT: Please have the tool, model number and instruction manual at hand before calling. ONE YEAR LIMITED CONSUMER WARRANTY If you have a question or should you have a problem with any Vulcan Air Tool, call the Vulcan Customer Service line at This product is warranted to be free from defects to material and workmanship for a period of ONE YEAR from date of purchase. If defective the product will be repaired or replaced. Call the Vulcan Power Tool customer service line at and a customer representative will attempt to help resolve any issue. If directed by a representative, return the product along with proof of purchase to your dealer. Normal wear, damage due to abuse or mishandling or unauthorized repair is not covered. This warranty does not apply to accessories. This warranty gives you specific legal rights that vary from state to state. This tool is intended for consumer use and is not a commercial tool. In the event the tool is used commercially, the warranty should be for a period of 30 days. VULCAN AIR TOOLS ARE MADE EXCLUSIVELY FOR: Memphis, TN

3 ! WARNING SAFETY RULES FOR ALL TOOLS Read and understand all instructions. Failure to follow all instructions listed below may result in serious personal injury. Work Area Keep work area clean and well lit. Cluttered benches and dark areas invite accidents. Keep by-standers, children, and visitors away while using your tool. All children should be kept away from the work area. Don t let them handle machines, tools or extension cords. Visitors can be a distraction and are difficult to protect from injury. Distractions can cause you to lose control. Personal Safety Stay alert. Watch what you are doing & use common sense. Keep hands and body away from the path of any potential fired fastener. Do not operate any tool when you are tired, under the influence of drugs, alcohol, or medication. A moment of inattention while operating this tool may result in serious injury. Dress properly. Do not wear loose clothing or jewelry; they can be caught in moving parts. Protective, non-electrically conductive gloves and non-skid footwear are recommended when working. Wear protective hair covering to contain long hair and keep it from harm. Keep hands dry, clean and free from oil and grease. Safety glasses To prevent eye injuries, the tool operator and all persons in the work area must wear ANSI Z87.1 approved safety glasses with permanently attached, rigid side shields. Ear protection. Wear ear protection to safeguard against possible hearing loss. Guard against electric shock. Prevent body contact with grounded surfaces: pipes, radiators, ranges, and refrigerator enclosures. Before driving fasteners into walls, floors, or wherever live electrical wires may be encountered, try to ascertain whether there is a danger of shock. Do not overreach. Keep proper footing and balance at all times. Do not reach over or across machines which are running. SAVE THESE INSTRUCTIONS Employers must enforce compliance with the safety warnings and all other instructions in this manual. Keep it available for use by everyone assigned to use this tool. Tool Use and Care Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. Store idle equipment. Store equipment in a dry area to inhibit rust. Equipment also should be in a high location or locked up to keep out of reach of children. Don t force the tool. It will do the job better and more safely at the rate for which it was intended. Use the right tool. Don t force a small tool or attachment to do the work of a larger industrial tool. Don t use a tool for a purpose for which it was not intended Extension cords. Observe warnings that accompany air compressors concerning the use of correct gauge and and concerning insulation for outdoor use. Service Check for damaged parts. Before using this tool, any part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mountings, and other conditions that may affect its operation. Inspect screws and tighten any ones that are loose. Any part that is damaged should be properly repaired or replaced by an authorized service center unless otherwise indicated elsewhere in the instruction manual. Have defective switches replaced by an authorized service center. Don t use the tool if switch does not turn it on and off properly. 3

4 User service. Some user-serviceable components are described in the Troubleshooting section. We cannot guarantee repairs made or attempted by anyone other than authorized agencies. Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in risk of injury. For example, internal wires may be misplaced or pinched, safety guard return springs may be improperly mounted. When servicing tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of injury. Certain cleaning agents such as gasoline, carbon tetrachloride, ammonia, etc. may damage plastic parts. SAFETY RULES FOR AIR NAILERS & STAPLERS Guard against electric shock. Prevent body contact with grounded surfaces: pipes, radiators, ranges, and refrigerator enclosures. Before driving fasteners into walls, floors, or wherever live electrical wires may be encountered, try to ascertain whether there is a danger of shock. Ear protection. Wear ear protection when using the tool for extended periods. Prolonged exposure to high intensity noise can cause hearing loss. Safety glasses To prevent eye injuries, the tool operator and all persons in the work area must wear approved safety glasses conforming to ANSI Z87.1 specifications with permanently attached, rigid side shields. Use clean, dry, regulated, compressed air at 60 to 100 psi. Do not connect tool to pressure which potentially exceeds 200 psi. Air hose. Only use hose that is rated for a minimum working pressure of 150 psi or 150% of the maximum system pressure, whichever is greater. Never use oxygen, carbon dioxide, combustible gases or any other bottled gas as a power source for this tool. Explosion and serious personal injury could result. Couplings. Connect tool to air supply hose with a 1/4 npt coupling that removes all pressure from the tool when the coupling is disconnnected. Be aware of air hoses and their connections. Don t trip over hoses. Make sure all connections are tight. Disconnect tool from air supply hose before doing any disassembly, maintenance, clearing a jammed fastener, leaving the work area, moving the tool to another location, or handing the tool to another person. Never use a tool that is leaking air, has missing or damaged parts, or requires repair. Make sure all screws and caps are securely tightened. Check for damaged parts. Never use a tool if safety, trigger, or spring are inoperable, missing or damaged. Do not alter or remove safety, trigger, or springs. Make daily inspections for the free movement of trigger and safety mechanism. Replacement parts. When servicing, use only identical replacement parts and fasteners recommended by us. Be sure the tool is disconnected from the air supply before loading the fasteners. Take care on re-connection: fasteners may be fired accidentally during connection. The fastener driving mechanism may cycle when the tool is connected to the air supply. Assume the tool contains fasteners at all times. Always keep it pointed away from yourself and others. No horseplay. Respect the tool as having lethal potential. Do not load fasteners with trigger or safety depressed. The tool may unintentionally fire a fastener. Do not depress the trigger when not driving fasteners. Never carry tool with finger on or touching the trigger mechanism: tool may fire an unwanted fastener. 4

5 Fire fasteners into work surface only and never into materials too hard to penetrate Grip tool firmly to maintain control while allowing the tool to recoil away from the work surface as the fastener is driven. If the safety is allowed to recontact the work surface before the trigger is released, an unwanted fastener will be fired. Do not drive fasteners on top of other fasteners, or with the tool at too steep an angle: the fasteners can ricochet causing personal injury. Do not drive fasteners too close to the edge of the workpiece. The workpiece is likely to split, allowing the fasteners to fly free or ricochet causing personal injury.! WARNING The warnings, cautions, and instructions detailed in this manual cannot cover all possible conditions and situations that occur. It must be understood by the operator that COMMON SENSE AND CAUTION ARE FACTORS that cannot be built into this product, but MUST BE SUPPLIED BY THE OPERATOR. 5

6 Nomenclature for No Flooring Nailer / Stapler A B C D E F KEY Hammer Face Long Arm Air Inlet Magazine Lock Fixed Magazine Shoe Characteristic Value Minimum Operating Air Pressure 60 PSI Maximum Operating Air Pressure 100 PSI Nail Standard flooring cleat nails Nail Length 1-1/2-2 Nail Capacity 100 Staples 15-1/2 ga. 1/2 crown flooring staples Staple Length 3/4-2 Staple Capacity 80 Air Inlet Air Consumption Tool Weight SPECIFICATIONS 1/4 NPT 5 80 PSI 11.5 lbs 6

7 OPERATION & USE INSTRUCTIONS! WARNING BE SURE THAT YOU READ, UNDERSTAND AND FOLLOW THE SAFETY RULES THAT ACCOMPANY THIS MANUAL. THIS WILL ALLOW FOR BEST USE AND MAXIMUM USER SATISFACTION. UNPACKING SETUP & OPERATION Check and make sure one of each of the following are all included. Hammer Nailer/Stapler S3 Hex Key S4 Hex Key S5 Hex Key Air Tool Oil Instruction Manual 25/32 Spacer (Installed) 1/2 Spacer AIR SYSTEM The nailer/stapler is designed to operate on clean, dry, compressed air, regulated at psi. The preferred system would include a filter, a pressure regulator with a gauge, and an automatic oiler located downstream from the main air supply, as close to the tool as possible (within 15 feet is ideal). Do not use bottled air or gases. Please see figure below: All compressed air contains moisture and other contaminants that can harm the internal components of the tool. An air line filter will remove most of these and significantly prolong the life of the tool. Ensure the in-line oiler has sufficient oil. If an in-line oiler is not available, place 2 drops of oil into the tool s air inlet at the beginning of each workday. More than this will be expelled from the tool s exhaust during firing. Air Fitting: The nailer/stapler should be equipped with a 1/4 NPT male plug to fit a quick connector coupling. To prevent accidental cycling even though disconnected, the tool must always be connected to the air supply in such a way that all air pressure in it is released when the coupling is disconnected. 7

8 ! CAUTION All air line components (including hoses, pipe, connectors, filters, & regulators, etc.) must be rated for a minimum working pressure of 150 psi or 150% of the maximum system pressure, whichever is greater. Disconnect the tool from the air supply before performing maintenance, clearing a jammed fastener, leaving the work area, moving the tool to another location, or handing it to another person. LOADING THE FASTENERS! CAUTION Keep the tool pointed away from yourself and others at all times. Do not load fasteners with safety or trigger depressed. Always wear approved safety glasses and hearing protection when preparing or operating this tool. Never use a tool that leaks air or needs repair. Be sure the tool is disconnected from the air supply BEFORE loading fasteners A. Loading Staples: 1. Hold the tool firmly, press the LOCK (Parts List, 46) and pull the MOVABLE MAGAZINE (Parts List, 35). 2. Place the specified type and size of staples in the FIXED MAGAZINE (Parts List, 58) from the topside. 3. Push and lock the movable magazine (Parts List, 35) B. Loading L Cleat Nails 1. Hold the tool firmly, press the LOCK (Parts List, 46) and pull the MOVABLE MAGAZINE (Parts List, 35). 2. Place the specified type and size of L cleats in the magazine from the side. The head of the L cleats should be inserted into the notch on the fixed magazine. 3. Push and lock the MOVABLE MAGAZINE (Parts List, 35) CONNECTING THE TOOL 1. Turn the compressor on. 2. Set the regulator to proper pressure for the size and type of fasteners being used. 3. After reading and understanding this entire manual, connect tool to air supply. OPERATING THE TOOL 1. The depth to which a fastener is driven is determined by the supplied air pressure. 1a. Test fire a fastener into a sample of the material you will be working on and check depth. 8

9 ! 1b. Adjust the regulator to supply air at a higher pressure if increase drive depth is desired. Decreasing supplied air pressure will result in the fastener driven depth also being decreased. 1c. Test fire another fastener and check depth again. CAUTION Keep tool pointed in a safe direction at all times. Never attempt to drive fasteners into materials too hard to penetrate, at too steep an angle, or too near the edge of the workpiece. The fastener can ricochet causing personal injury. Disconnect tool from air supply before loading fasteners, doing any disassembly, maintenance, clearing a jammmed fastener, leaving the work area, moving the tool to another location, or handing the tool to another person. Clean and inspect the tool daily. Carefully check for proper operation of trigger and safety mechanism. Do not use the tool unless both the trigger and the safety mechanism are functional, or if the tool is leaking air or needs any other repair. 2. Load the fasteners following the directions in the LOADING THE FASTENERS section. 3. Connect the tool to the air supply. Make sure the air pressure is within the minimum and maximum operating pressures as noted in the SPECIFICATIONS section. 4. Hold the LONG ARM (Parts List, 66) and press the SHOE (Parts List, 28) against the work surface. 5. Strike the HAMMER FACE (Parts List, 10) with the provided HAMMER (Parts List, 68) to drive the fastener out. 6. Lift the tool off of the work surface. 7. In certain tight spaces, it may be useful to remove the handle. 8. Two spacers are provided, (Schematic, 32 & 32a). They provide a non-marring surface on the bottom of the shoe. Choose the spacer thickness that places a fastener correctly in the apex of the angle between the flooring tongue and its vertical edge. CLEARING A JAMMED FASTENER 1.! CAUTION Disconnect the tool from the air supply. 2. Open the magazine cover. Remove any remaining fasteners from the tool. 3. Use a slender, soft steel rod to push the drive blade to its uppermost position. Remove the jammed fastener with needle nose pliers. 4. Follow instructions in LOADING THE FASTENERS to reload fasteners.

10 MAINTENANCE DAILEY MAINTENANCE! CAUTION Disconnect tool from air supply before cleaning and inspection. Correct all problems before putting the tool back in service. 1. Wipe tool clean and inspect for wear or damage. Use non-flamable cleaning solutions to wipe exterior of tool only if necessary. Do Not Soak tool with cleaning solutions. Such solutions can damage internal parts. 2. Inspect trigger and safety mechanism to assure system is complete and functional: no loose or missing parts, no binding or sticking parts. 3. Keep all screws tight. Loose screws can cause personal injury or damage the tool. 4. If the tool is used without an in-line oiler, place 2 drops of air tool oil into the air inlet of the tool at the beginning of each workday and after about 1 hour of continuous use. Frequent but not excessive lubrication is required for best performance. Oil added through the airline connection will lubricate all internal parts. Use only air tool oil. Do not use oil with detergents or other additives. These can cause damage through accelerated wear to the seals in the tool. 5. Use a small amount of oil on all exterior moving parts and pivots. 6. Dirt and water in the air supply are major causes of pneumatic tool wear. See the section on SETUP: AIR SYSTEM for more information. 7. Keep tools clean for better and safer performance. Use non-flammable cleaning solutions sparingly and only if necessary. Do not soak parts in the solutions.! CAUTION Such solutions may damage O-rings and other parts. TROUBLESHOOTING STOP using the tool immediately if any of the following problems occur. Serious personal injury could occur. Any repairs or replacements must be done by a qualified person or an authorized service center only.! CAUTION Disconnect the tool from air supply before performing any service procedure. When inserting new or re-installing O-rings, make sure they are clean and lubricated with an O-ring lubricant. PROBLEM CAUSE SOLUTION Air leaking in cylinder cap Loose nose screws Tighten and recheck Gasket is cracked/worn Replace gasket 10

11 TROUBLESHOOTING PROBLEM CAUSE SOLUTION Lack of power, slow to cycle. Poor power of shooting and returning Shooting no fastener or intermittent feeding Tool is too dry Air pressure too low Exhaust blocked Damaged pusher spring Wrong size of fastener Magazine or wear plate is dirty Place 2 drops of oil into the air plug Check air supply equipment Clean exhaust channel Replace spring Use standard fasteners Clean magazine and nose Fastener is jammed in tool Driver channel is worn Replace wear plate Driver is broken/worn Bent fasteners WARNING! Repairs should be made by an authorized repair center. Opening this tool could invalidate your warranty. PARTS LIST Please refer to the schematic drawing on page 13 ITEM DESCRIPTION 1 Cylinder Bushing 2 Plunger 3 O-Ring 19.2 x O-Ring 15.9 x Poppet 6 O-Ring 42.5 x O-Ring 17.5 x O-Ring 57.4 x Piston Assembly 10 Hammer Face 11 Screw M5 x Cylinder Cap 13 Screw M4 x 20 ITEM Replace driver Use standard fasteners DESCRIPTION 14 Spring Washer 4 15 Poppet Actuator 16 O-Ring 54.2 x Seal 18 Body 19 Bumper 20 Nose 21 Screw M3 x Spring Pin 3 x Baffle Plate 24 Screw M5 x Spring Washer 5 26 Blade Guide 11

12 PARTS LIST Please refer to the schematic drawing on page 13 ITEM DESCRIPTION 27 Limited Nail Plate 28 Shoe 29 Joint Guider 30 Bushing 31 Screw M6 x /32 Spacer 32a 1/2 Spacer 33 Screw M6 x Spring Pin 2 x Movable Magazine 36 Spring Washer 6 37 Screw M6 x Feeder Shoe 39 Spring 40 Baffle Lock 41 Magazine Plate 42 Screw 43 Spring 44 Screw M4 x Limited Plate 46 Lock 47 Nut M4 ITEM DESCRIPTION 48 Spring Washer 4 49 Bushing 50 Spring Pin 3 x Washer 4 52 Pothook 53 Screw M3 x 5 54 Spring Washer 3 55 Washer 3 56 Leaf Spring 57 Screw M3 x 8 58 Fixed Magazine 59 Spring Pin 2.5 x Screw M3 x 6 61 Magnet 62 Rail 63 Nut M4 64 Washer 65 Clamp Screw 66 Air Plug 67 Arm 68 Hammer 12

13 SCHEMATIC DRAWING 13

Instruction Manual de instrucciones

Instruction Manual de instrucciones Instruction Manual Manual 34 degree Framing de instrucciones Strip Nailer ITEM NO. 467-6789 ARTICULO No. OFN3490 000-0000 v070823 THANK YOU for your purchase of this Vulcan Air Tool. With proper care and

More information

Instruction Manual. de instrucciones. Roofing Coil Nailer. ITEM NO ARTICULO No. OCN45R v070823

Instruction Manual. de instrucciones. Roofing Coil Nailer. ITEM NO ARTICULO No. OCN45R v070823 Instruction Manual Manual Roofing Coil Nailer de instrucciones ITEM NO. 039-8438 ARTICULO No. OCN45R 000-0000 v070823 THANK YOU for your purchase of this Vulcan Air Tool. With proper care and use you can

More information

accidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS

accidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS 18 GAUGE 1-1/4 INCH BRAD NAILER Model: 7611 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry.

More information

accidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS

accidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS 18 GAUGE 2 INCH BRAD NAILER Model: 7555 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry.

More information

CS150 CAP STAPLER OWNER S MANUAL

CS150 CAP STAPLER OWNER S MANUAL Operation Revised 6/2013 www.stingerworld.com CS150 CAP STAPLER OWNER S MANUAL! Maintenance Safety Warranty PLEASE READ! This manual contains important information about product safety. WELCOME TO STINGER

More information

FLOOR STAPLER. WITH HAMMER Model ASSEMBLY and OPERATING INSTRUCTIONS

FLOOR STAPLER. WITH HAMMER Model ASSEMBLY and OPERATING INSTRUCTIONS FLOOR STAPLER WITH HAMMER Model 93197 ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2005 by Harbor Freight

More information

AIR INLINE METAL SHEAR

AIR INLINE METAL SHEAR AIR INLINE METAL SHEAR ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd. / Camarillo, CA 93011 Copyright 1997 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork

More information

2 in. 18 Gauge Brad Nailer. User manual

2 in. 18 Gauge Brad Nailer. User manual 8504342 2 in. 18 Gauge Brad Nailer User manual Technical Data Capacity....100pcs Nail length... 15-50mm( 5/8-2 ) Fastener size....18gauge (1.25 1.00mm) Operation pressure 70-110PSI(4.8-7.5bar) Air inlet....1/4

More information

OWNER S MANUAL. Page: 1 of 8

OWNER S MANUAL. Page: 1 of 8 Air Needle Scaler OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal

More information

1/2 CROWN AIR STAPLER

1/2 CROWN AIR STAPLER 1/2 CROWN AIR STAPLER Model 54753 ASSEMBLY AND OPERATION INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ AND

More information

3/8" Dr. Air Butterfly Impact Wrench

3/8 Dr. Air Butterfly Impact Wrench 8192106 3/8" Dr. Air Butterfly Impact Wrench Owner s Manual Read and understand all instructions before use. Retain this manual for future reference. Specifications Construction: Polished aluminum and

More information

TEM# Air Hammer Combo USER'S MANUAL

TEM# Air Hammer Combo USER'S MANUAL Air Tools TEM# 40 Air Hammer Combo USER'S MANUAL Read carefully and understand RULES FOR SAFE OPERATION and instructions before operating. Failure to follow the safety rules and other basic safety precautions

More information

INTENDED USE TECHNICAL SPECIFICATIONS

INTENDED USE TECHNICAL SPECIFICATIONS 1/2IN. HEAVY-DUTY AIR IMPACT WRENCH OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result

More information

CS150 CAP STAPLER OWNER S MANUAL Operation Safety Maintenance Warranty! www.stingerworld.com PLEASE READ! This manual contains important information about product safety. REV 06/15 WELCOME TO STINGER Congratula*ons

More information

Composite Pistol-Type Air Needle Scaler OWNER S MANUAL

Composite Pistol-Type Air Needle Scaler OWNER S MANUAL Composite Pistol-Type Air Needle Scaler OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may

More information

Operating Manual. --N5021 Wide Crown Stapler--

Operating Manual. --N5021 Wide Crown Stapler-- Operating Manual --N5021 Wide Crown Stapler-- NOTE: Please read and fully understand the instructions in this manual before operating the pneumatic power tool. Carefully read through this OPERATOR'S MANUAL

More information

AIR HAMMERS MODEL NO: CAT138/CAT139 OPERATING & MAINTENANCE INSTRUCTIONS PART NO: / GC064

AIR HAMMERS MODEL NO: CAT138/CAT139 OPERATING & MAINTENANCE INSTRUCTIONS PART NO: / GC064 AIR HAMMERS MODEL NO: CAT138/CAT139 PART NO: 3120152 /3120153 OPERATING & MAINTENANCE INSTRUCTIONS GC064 INTRODUCTION Thank you for purchasing this CLARKE Air Hammer. Before attempting to use this product,

More information

General Safety Rules 3. Specific Safety Rules for Stapler Know Your Stapler. 8. Operation Troubleshooting Exploded View..

General Safety Rules 3. Specific Safety Rules for Stapler Know Your Stapler. 8. Operation Troubleshooting Exploded View.. 1 Table of Contents Technical Data 2 General Safety Rules 3 Specific Safety Rules for Stapler... 6 Know Your Stapler. 8 Operation... 9 Troubleshooting.. 12 Exploded View.. 13 Parts List. 14 Warranty 15

More information

IMPACT WRENCH ASSEMBLY AND OPERATING INSTRUCTIONS

IMPACT WRENCH ASSEMBLY AND OPERATING INSTRUCTIONS 1 / 2 COMPACT AIR TWIN HAMMER IMPACT WRENCH 94802 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission

More information

HEAVY-DUTY AIR RATCHET WRENCH OWNER S MANUAL

HEAVY-DUTY AIR RATCHET WRENCH OWNER S MANUAL HEAVY-DUTY AIR RATCHET WRENCH OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in

More information

RT3 CAP NAILER OWNER S MANUAL Operation Safety Maintenance Warranty! www.stingerworld.com PLEASE READ! This manual contains important information about product safety. REV 09/14 WELCOME TO STINGER Congratulations

More information

G10K - 1/2" Heavy-Duty Air Impact Wrench

G10K - 1/2 Heavy-Duty Air Impact Wrench G10K - 1/2" Heavy-Duty Air Impact Wrench OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic

More information

1/2 in. AIR IMPACT WRENCH (TWIN HAMMER)

1/2 in. AIR IMPACT WRENCH (TWIN HAMMER) 1/2 in. AIR IMPACT WRENCH (TWIN HAMMER) WARNING Read Operator s Manual. Do not operate equipment until you have read this Operator s Manual for Safety, Assembly/Operation and Maintenance Instructions.

More information

Operating Manual. --N851 Medium Crown Stapler--

Operating Manual. --N851 Medium Crown Stapler-- Operating Manual --N851 Medium Crown Stapler-- NOTE: Please read and fully understand the instructions in this manual before operating the pneumatic power tool. Carefully read through this OPERATOR'S MANUAL

More information

1/2 Twin Hammer Composite. Air Impact Wrench ASSEMBLY AND OPERATING INSTRUCTIONS

1/2 Twin Hammer Composite. Air Impact Wrench ASSEMBLY AND OPERATING INSTRUCTIONS 1/2 Twin Hammer Composite Air Impact Wrench 95098 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission

More information

LUBRICATOR ASSEMBLY AND OPERATING INSTRUCTIONS

LUBRICATOR ASSEMBLY AND OPERATING INSTRUCTIONS AIR FILTER, REGULATOR AND LUBRICATOR 4035 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 004 by Harbor Freight

More information

CUT OFF TOOL MODEL: CAT113

CUT OFF TOOL MODEL: CAT113 CUT OFF TOOL MODEL: CAT113 Part No: 3120135 ASSEMBLY & INSTRUCTION MANUAL LS0309 INTRODUCTION Thank you for purchasing this CLARKE product Before attempting to use the product, it is essential that you

More information

1 DRIVE INDUSTRIAL IMPACT WRENCH

1 DRIVE INDUSTRIAL IMPACT WRENCH 1 DRIVE INDUSTRIAL IMPACT WRENCH 92622 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight

More information

NOTE: Parts are no longer available for this tool. The manual will continue on the next page.

NOTE: Parts are no longer available for this tool. The manual will continue on the next page. NOTE: Parts are no longer available for this tool. The manual will continue on the next page. Form Z455 Date 12-97/D Page 1 of 6 INSTRUCTIONS & PARTS LIST FOR SIOUX 8200 POLISHER GENERAL SAFTEY RULES READ

More information

Copyright MAY, 2008 By Grizzly Industrial, Inc. Warning: No portion of this manual may be reproduced in any shape or form without the written

Copyright MAY, 2008 By Grizzly Industrial, Inc. Warning: No portion of this manual may be reproduced in any shape or form without the written MODEL G5789/G5790 13-PIECE 3 4" IMPACT WRENCH KIT INSTRUCTION MANUAL Copyright MAY, 2008 By Grizzly Industrial, Inc. Warning: No portion of this manual may be reproduced in any shape or form without the

More information

AIR DRIVE ROLL FEED CARTON STAPLER MODEL: H-1031 MANUAL

AIR DRIVE ROLL FEED CARTON STAPLER MODEL: H-1031 MANUAL AIR DRIVE ROLL FEED CARTON STAPLER MODEL: H-1031 MANUAL WARNING Before operating this stapler familiarize yourself with the safety warnings and instructions in this manual. Keep these instructions with

More information

6 DUAL ACTION AIR SANDER

6 DUAL ACTION AIR SANDER 6 DUAL ACTION AIR SANDER Model 42966 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ

More information

AIR STAPLER MODEL: CSG1C Part No

AIR STAPLER MODEL: CSG1C Part No AIR STAPLER MODEL: CSG1C Part No. 3110375 0506 OPERATING & MAINTENANCE INSTRUCTIONS SPECIFICATIONS Min. Hose Size (ID)... 6mm (1/4 ) Air Inlet Connector... 10mm Quick Fit Ave. Air Consumption... 0.27 cfm

More information

FILTER REGULATORS MODEL NO: CAT155 & CAT156 FITTING & MAINTENANCE INSTRUCTIONS PART NO: & ORIGINAL INSTRUCTIONS

FILTER REGULATORS MODEL NO: CAT155 & CAT156 FITTING & MAINTENANCE INSTRUCTIONS PART NO: & ORIGINAL INSTRUCTIONS FILTER REGULATORS MODEL NO: CAT155 & CAT156 PART NO: 3120169 & 3120170 FITTING & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0117 INTRODUCTION Thank you for purchasing this CLARKE Filter/Regulator.

More information

OPERATION and MAINTENANCE MANUAL

OPERATION and MAINTENANCE MANUAL US5016LMA FINE WIRE AUTO STAPLER OPERATION and MAINTENANCE MANUAL BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL TO UNDERSTAND AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP

More information

WALL-MOUNT GARDEN HOSE REEL OWNER S MANUAL

WALL-MOUNT GARDEN HOSE REEL OWNER S MANUAL WALL-MOUNT GARDEN HOSE REEL OWNER S MANUAL Perpendicular Mount Parallel Mount WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety

More information

1/4 Air Ratchet Wrench

1/4 Air Ratchet Wrench /4 Air Ratchet Wrench 92849 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 2005 by Harbor Freight Tools. All

More information

SAFETY MEASURES. These important guidelines should always be followed to work safely with the PRIMATECH pneumatic stapler model Q180:

SAFETY MEASURES. These important guidelines should always be followed to work safely with the PRIMATECH pneumatic stapler model Q180: PRIMATECH PNEUMATIC 18GA STAPLER Q180 The pneumatic flooring stapler Q180 is a professional precision tool specially developed for the installation of most of 3/8" to 5/8" solid and engineered hardwood

More information

AIR STAPLER. MODEL: CSG3KC Part No OPERATING & MAINTENANCE INSTRUCTIONS

AIR STAPLER. MODEL: CSG3KC Part No OPERATING & MAINTENANCE INSTRUCTIONS AIR STAPLER MODEL: CSG3KC Part No. 3110380 0506 OPERATING & MAINTENANCE INSTRUCTIONS SPECIFICATIONS Min. Hose Size (ID)... 6mm (1/4 ) Air Inlet Connector... 10mm Quick Fit Ave. Air Consumption... 0.4 cfm

More information

18-GAUGE NARROW CROWN STAPLER

18-GAUGE NARROW CROWN STAPLER 18-GAUGE NARROW CROWN STAPLER IMPORTANT: Model # 61710 bit.ly/wenvideo Your new tool has been engineered and manufactured to WEN s highest standards for dependability, ease of operation, and operator safety.

More information

3 AIR HIGH SPEED CUTTER

3 AIR HIGH SPEED CUTTER 3 AIR HIGH SPEED CUTTER 90114 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools.

More information

FLOOR NAILER CLEAT & STAPLE TYPE

FLOOR NAILER CLEAT & STAPLE TYPE FLOOR NAILER CLEAT & STAPLE TYPE Model 97586 ASSEMBLY AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result

More information

4-IN-1 PNEUMATIC FLOORING NAILER

4-IN-1 PNEUMATIC FLOORING NAILER 4-IN-1 PNEUMATIC FLOORING NAILER For replacement parts visit WENPRODUCTS.COM IMPORTANT: Model # 61741 bit.ly/wenvideo Your new tool has been engineered and manufactured to WEN s highest standards for dependability,

More information

AIR/OVER HYDRAULIC JACK 20 TON

AIR/OVER HYDRAULIC JACK 20 TON AIR/OVER HYDRAULIC JACK 0 TON 4487 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 999 by Harbor Freight Tools.

More information

4-in-1 Professional Inflator Kit

4-in-1 Professional Inflator Kit 4-in-1 Professional Inflator Kit Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety

More information

ATD LB PRESSURE BLASTER INSTRUCTION MANUAL

ATD LB PRESSURE BLASTER INSTRUCTION MANUAL ATD-8402 90LB PRESSURE BLASTER INSTRUCTION MANUAL SAVE THESE INSTRUCTIONS SAFETY INSTRUCTIONS FOR SANDBLASTER 1. Before opening the tank release the air pressure on the sand tank. To do this, turn off

More information

MODEL H8214 AIR BODY SAW INSTRUCTION MANUAL

MODEL H8214 AIR BODY SAW INSTRUCTION MANUAL MODEL H8214 AIR BODY SAW INSTRUCTION MANUAL COPYRIGHT SEPTEMBER, 2007 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL

More information

Air Hammer Model 32940

Air Hammer Model 32940 Air Hammer Model 32940 Assembly and Operation Instructions 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND

More information

Copyright MAY, 2008 By Grizzly Industrial, Inc. Warning: No portion of this manual may be reproduced in any shape or form without the written

Copyright MAY, 2008 By Grizzly Industrial, Inc. Warning: No portion of this manual may be reproduced in any shape or form without the written MODEL G5791/G5792 17-PIECE 1 2" IMPACT WRENCH & RATCHET KIT INSTRUCTION MANUAL Copyright MAY, 2008 By Grizzly Industrial, Inc. Warning: No portion of this manual may be reproduced in any shape or form

More information

DUAL ACTION SANDER MODEL NO: CAT121 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0211

DUAL ACTION SANDER MODEL NO: CAT121 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0211 DUAL ACTION SANDER MODEL NO: CAT121 PART NO: 3110877 OPERATION & MAINTENANCE INSTRUCTIONS LS0211 INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use this product, please

More information

1/4 COMPOSITE AIR DIE GRINDER

1/4 COMPOSITE AIR DIE GRINDER 1/4 COMPOSITE AIR DIE GRINDER 95029 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,

More information

3 COMPOSITE AIR CUT-OFF TOOL

3 COMPOSITE AIR CUT-OFF TOOL 3 COMPOSITE AIR CUT-OFF TOOL 95028 ASSEMBLY and OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,

More information

AIR-POWERED 3-IN-1 FLOORING NAILER

AIR-POWERED 3-IN-1 FLOORING NAILER model no. 058-980-8 AIR-POWERED 3-IN- FLOORING NAILER IMPORTANT: For your own safety, read and follow all of the Safety Guidelines and Operating Instructions before operating this nailer. Keep this manual

More information

1/2 DRIVE AIR IMPACT WRENCH

1/2 DRIVE AIR IMPACT WRENCH 1/2 DRIVE AIR IMPACT WRENCH 2 YEAR WARRANTY 1110NM MAX TORQUE LOW AIR CONSUMPTION TWIN HAMMER MECHANISM K13204 ED2 Sept 15 Table of Contents 1/2 DRIVE AIR IMPACT WRENCH Know Your Product...1 General Safety

More information

REVERSIBLE AIR DRILL

REVERSIBLE AIR DRILL REVERSIBLE AIR DRILL MODEL NO: CAT87 PART NO: 3110835 OPERATING & MAINTENANCE INSTRUCTIONS GC0613 INTRODUCTION Thank you for purchasing this CLARKE Reversible Air Drill Before attempting to use this product,

More information

60 Drum Style Spike Aerator

60 Drum Style Spike Aerator 60 Drum Style Spike Aerator OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

AIR OVER HYDRAULIC ATV/MOTORCYCLE LIFT SET UP AND OPERATING INSTRUCTIONS

AIR OVER HYDRAULIC ATV/MOTORCYCLE LIFT SET UP AND OPERATING INSTRUCTIONS AIR OVER HYDRAULIC ATV/MOTORCYCLE LIFT SET UP AND OPERATING INSTRUCTIONS Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. SAVE THIS MANUAL

More information

AIR DIE GRINDER KIT ITEM # MODEL #SGY-AIR139. Français p. 14. Español p. 28 ATTACH YOUR RECEIPT HERE

AIR DIE GRINDER KIT ITEM # MODEL #SGY-AIR139. Français p. 14. Español p. 28 ATTACH YOUR RECEIPT HERE ITEM #072332 KOBALT and the K & Design are registered trademarks of LF, LLC. All rights reserved. AIR DIE GRINDER KIT MODEL #SGY-AIR39 Français p. 4 Español p. 28 ATTACH YOUR RECEIPT HERE Serial Number

More information

PNEUMATIC ST-400 FENCING STAPLER USER GUIDE

PNEUMATIC ST-400 FENCING STAPLER USER GUIDE PNEUMATIC ST-400 FENCING STAPLER USER GUIDE READ ALL SAFETY INSTRUCTIONS BEFORE OPERATION INJURY MAY RESULT FROM INCORRECT TOOL USE ALWAYS WEAR EYE AND HEARING PROTECTION WHEN OPERATING STAPLING TOOL NEVER

More information

INSTRUCTION MANUAL AIR-POWERED STAPLER

INSTRUCTION MANUAL AIR-POWERED STAPLER INSTRUCTION MANUAL AIR-POWERED STAPLER 058-8132-2 2 QUICK START GUIDE TECHNICAL SPECIFICATIONS 3 SAFETY GUIDELINES 4 9 KEY PARTS DIAGRAM 10 IMPORTANT INFORMATION 11 13 TYPES OF FASTENERS 14 OPERATING INSTRUCTIONS

More information

AIR HYDRAULIC RIVETER

AIR HYDRAULIC RIVETER AIR HYDRAULIC RIVETER Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

PNEUMATIC FLOORING NAILER PNEUMATIC FLOORING STAPLER

PNEUMATIC FLOORING NAILER PNEUMATIC FLOORING STAPLER PNEUMATIC FLOORING NAILER P240 PNEUMATIC FLOORING STAPLER P260 OPERATING INSTRUCTIONS WARNING Read these instructions thoroughly before using this tool and keep it handy for reference. Revision 02/13 Printed

More information

INDUSTRIAL COMPOSITE 3/8 DRILL REVERSIBLE

INDUSTRIAL COMPOSITE 3/8 DRILL REVERSIBLE INDUSTRIAL COMPOSITE 3/8 DRILL REVERSIBLE 2 YEAR WARRANTY KEYLESS CHUCK FORWARD & REVERSE ERGONOMIC RUBBER GRIP K13260 ED1 December 15 Table of Contents Know Your Product...1 General Safety Instructions...2

More information

Offset head dual chuck

Offset head dual chuck Offset head dual chuck Tire inflator 90670 Set up and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result

More information

HIGH SPEED SABRE SAW

HIGH SPEED SABRE SAW HIGH SPEED SABRE SAW Model Nos: CAT32B & CAT97 Part No: 3110426 & 3110853 OPERATION & MAINTENANCE INSTRUCTIONS GC11/12 INTRODUCTION Thank you for purchasing this CLARKE air tool. Before attempting to use

More information

15 GAUGE AIR FINISH NAILER

15 GAUGE AIR FINISH NAILER MAGNESIUM 15 GAUGE AIR FINISH NAILER Models 94440 SET UP AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read and understand tool labels and manual. Failure to follow warnings

More information

MODEL H RPM

MODEL H RPM MODEL H8217 3 8" REVERSIBLE ANGLE DRILL 0 1500 RPM INSTRUCTION MANUAL COPYRIGHT AUGUST, 2007 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT

More information

1/4 SHEET PALM SANDER

1/4 SHEET PALM SANDER 1/4 SHEET PALM SANDER OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

3:1 High Ratio Oil Pump W. Extn. Kit

3:1 High Ratio Oil Pump W. Extn. Kit 3:1 High Ratio Oil Pump W. Extn. Kit OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result

More information

Model ASSEMBLY and OPERATING INSTRUCTIONS

Model ASSEMBLY and OPERATING INSTRUCTIONS QUICK CHANGE AIR BRUSH KIT Model 93506 ASSEMBLY and OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,

More information

OPERATION & MAINTENANCE INSTRUCTIONS

OPERATION & MAINTENANCE INSTRUCTIONS 1 /2 REVERSIBLE AIR DRILL MODEL NO: CAT123 PART NO: 3110879 OPERATION & MAINTENANCE INSTRUCTIONS GC1110 INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use this product,

More information

PS Plasma 375 Plasma Cutter Kit Assembly & Operating Instructions

PS Plasma 375 Plasma Cutter Kit Assembly & Operating Instructions PS07569 201412 Plasma 375 Plasma Cutter Kit Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation

More information

3/8 ANGLED AIR DRILL

3/8 ANGLED AIR DRILL 3/8 ANGLED AIR DRILL MODEL NO: CAT61 PART NO: 3110461 OPERATING & MAINTENANCE INSTRUCTIONS GC0614 INTRODUCTION Thank you for purchasing this CLARKE Angled Air Drill. Before attempting to use this product,

More information

Clipped Head 34 0 Framing Nailer

Clipped Head 34 0 Framing Nailer Clipped Head 34 0 Framing Nailer IMPORTANT: Model # 61798 bit.ly/wenvideo Your new tool has been engineered and manufactured to WEN s highest standards for dependability, ease of operation, and operator

More information

ORBITAL AIR SANDER. Owner s Manual

ORBITAL AIR SANDER. Owner s Manual ORBITAL AIR SANDER Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

ANGLE DIE GRINDER SET

ANGLE DIE GRINDER SET ANGLE DIE GRINDER SET MODEL NO: CAT65 PART NO: 3110725 OPERATING & MAINTENANCE INSTRUCTIONS GC0614 INTRODUCTION Thank you for purchasing this CLARKE Angle Die Grinder Set. Before attempting to use this

More information

21 ANGLE FRAMING NAILER SET UP AND OPERATING INSTRUCTIONS. Visit our website at:

21 ANGLE FRAMING NAILER SET UP AND OPERATING INSTRUCTIONS. Visit our website at: 21 ANGLE FRAMING NAILER 98733 SET UP AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury.

More information

OPERATING & MAINTENANCE INSTRUCTIONS

OPERATING & MAINTENANCE INSTRUCTIONS 1/4 AIR DIE GRINDER (C/W 5 EXTN) MODEL NO: CAT130 PART NO: 3120144 OPERATING & MAINTENANCE INSTRUCTIONS GC0414 INTRODUCTION Thank you for purchasing this CLARKE Die Grinder which is ideal for light tasks

More information

Portable Compressed CO 2 Regulator

Portable Compressed CO 2 Regulator Portable Compressed CO 2 Regulator 99901 Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

IMPACT WRENCH MODEL NO: CAT78 OPERATING & MAINTENANCE INSTRUCTIONS PART NO: GC0813

IMPACT WRENCH MODEL NO: CAT78 OPERATING & MAINTENANCE INSTRUCTIONS PART NO: GC0813 IMPACT WRENCH MODEL NO: CAT78 PART NO: 3110790 OPERATING & MAINTENANCE INSTRUCTIONS GC0813 INTRODUCTION Thank you for purchasing this CLARKE Impact Wrench. Before attempting to use this product, please

More information

SPECIFICATIONS TABLE Maximum Air Pressure 115 PSI Air Tank Capacity 20 Gallons

SPECIFICATIONS TABLE Maximum Air Pressure 115 PSI Air Tank Capacity 20 Gallons SPECIFICATIONS TABLE Maximum Air Pressure 115 PSI Air Tank Capacity 20 Gallons Air Flow Capacity 6.2 CFM at 40 PSI 5.2 CFM at 90 PSI Motor 2.5 HP Working / 4 HP Peak 120 Volt / 60 Hz / 13 A / 1-Phase Required

More information

Hercules Space Saver Sole Press series

Hercules Space Saver Sole Press series Hercules Space Saver Sole Press series HERCULESSSD Also available in single, SKU: HERCULESSS Operator Manual Manufactured by: 2 HERCULES SPACE SAVER PRESS GENERAL DESCRIPTION Your Hercules Press is designed

More information

FINISH STAPLER R150FSA

FINISH STAPLER R150FSA OPERATOR S MANUAL FINISH STAPLER R150FSA Your finish stapler has been engineered and manufactured to our high standards for dependability, ease of operation, and operator safety. When properly cared for,

More information

2000 lb manual winch

2000 lb manual winch 2000 lb manual winch Model 41694 Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA 93011

More information

RARS5000 AIR BODY SAW OWNER S OPERATING MANUAL

RARS5000 AIR BODY SAW OWNER S OPERATING MANUAL RARS5000 AIR BODY SAW OWNER S OPERATING MANUAL DESCRIPTION 1. No mar 2. No mar tip 3. Housing grip 4. Trigger 5. Air inlet 6. Air inlet plug 7. Plastic board Important! It is essential that you read the

More information

AIR RATCHET WRENCH MODEL NO: CAT21B & CAT90 OPERATING & MAINTENANCE INSTRUCTIONS PART NO: & GC05/14

AIR RATCHET WRENCH MODEL NO: CAT21B & CAT90 OPERATING & MAINTENANCE INSTRUCTIONS PART NO: & GC05/14 AIR RATCHET WRENCH MODEL NO: CAT21B & CAT90 PART NO: 3110400 & 3110846 OPERATING & MAINTENANCE INSTRUCTIONS GC05/14 INTRODUCTION Thank you for purchasing this CLARKE Air-Powered Ratchet Wrench. Before

More information

AC1810 / AC1810-A TECHNICAL SPECIFICATIONS. Operating Pressure psi ( kgs/cm²) [AC1810] Displacement. Net Weight

AC1810 / AC1810-A TECHNICAL SPECIFICATIONS. Operating Pressure psi ( kgs/cm²) [AC1810] Displacement. Net Weight Technical Specifications Operating Instructions Maintenance Information Troubleshooting Guide Parts Diagrams AC1810 / AC1810-A THE EVOLUTION OF PERFECTION CAUTION: Before attempting to use or service this

More information

P245 PNEUMATIC FLOORING TOOL OPERATING INSTRUCTIONS

P245 PNEUMATIC FLOORING TOOL OPERATING INSTRUCTIONS P245 PNEUMATIC FLOORING TOOL OPERATING INSTRUCTIONS WARNING Read these instructions thoroughly before using this tool and keep it handy for reference. Printed in Canada v140, 08/15 PRIMATECH PNEUMATIC

More information

ATD-2142 Air Body Saw Owner s Manual

ATD-2142 Air Body Saw Owner s Manual ATD-242 Air Body Saw Owner s Manual SPECIFICATIONS Strokes Per Minute...0,000 Stroke Length....354 Exhaust...Front Average Air Consumption...2.5 CFM Inlet.../4 NPT Length...9.25 (without blade) Weight...45

More information

Air Nailer / Stapler Kit

Air Nailer / Stapler Kit Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate

More information

AIR-POWERED FINISH NAILER MODEL T64C INSTRUCTION MANUAL

AIR-POWERED FINISH NAILER MODEL T64C INSTRUCTION MANUAL AIR-POWERED FINISH NAILER MODEL T64C INSTRUCTION MANUAL IMPORTANT: Read all safety rules and operating Instructions carefully before starting the product. Keep this Manual for future reference. Residual

More information

2 Gallon, 100 PSI Oilless

2 Gallon, 100 PSI Oilless 2 Gallon, 100 PSI Oilless Air Compressor Model 47407 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

4 ANGLE GRINDER MODEL NO: CAT 52 PART

4 ANGLE GRINDER MODEL NO: CAT 52 PART 4 ANGLE GRINDER 4 ANGLE GRINDER MODEL NO: CAT 52 PART No: 3110685 OPERATION & MAINTENANCE INSTRUCTIONS 0807 Fig.1 SPECIFICATIONS Model:...CAG52 Part Number:...3110685 Rated Wheel...Capacity: 4 x 1/4 (type

More information

60 farm jack. Distributed exclusively by Harbor Freight Tools Mission Oaks Blvd., Camarillo, CA 93011

60 farm jack. Distributed exclusively by Harbor Freight Tools Mission Oaks Blvd., Camarillo, CA 93011 60 farm jack 66183 Set up And Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com Read

More information

AIR-POWERED MINI PALM-GRIP NAILER

AIR-POWERED MINI PALM-GRIP NAILER INSTRUCTION MANUAL AIR-POWERED MINI PALM-GRIP NAILER 058-8987-8 2 QUICK START GUIDE TECHNICAL SPECIFICATIONS 3 SAFETY GUIDELINES 4 9 KEY PARTS DIAGRAM 10 IMPORTANT INFORMATION 11 13 TYPES OF FASTENERS

More information

1/2 DRIVE AIR IMPACT WRENCH STUBBY

1/2 DRIVE AIR IMPACT WRENCH STUBBY 1/2 DRIVE AIR IMPACT WRENCH STUBBY COMPACT AND LIGHT WEIGHT ONLY 610NM LONG TORQUE 122MM K13203 ED1 Sept 15 MAX LOW AIR CONSUMPTION TWIN HAMMER MECHANISM Table of Contents Know Your Product...1 General

More information

KP-APN-22 Pneumatic Carton Stapler

KP-APN-22 Pneumatic Carton Stapler KP-APN-22 Pneumatic Carton Stapler MANUAL/WARNING: IMPORTANT PLEASE READ BEFORE USING TOOL Please read the following operating instructions manual. Refer to this manual for safety, adjustment and trouble

More information

10 DRIP NOZZLE WATERING DRIP KIT Model / Model 46095

10 DRIP NOZZLE WATERING DRIP KIT Model / Model 46095 10 DRIP NOZZLE WATERING DRIP KIT Model 93261 / Model ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission

More information