2018 ARMS & ADAPTERS CATALOG
|
|
- Gabriel Craig
- 5 years ago
- Views:
Transcription
1 2018 ARMS & ADAPTERS CATALOG Beneath the Surface 632 west Palm Ave. Redlands, CA
2 BtS Ball-Jointed Arm and Clamp Systems At Beneath the Surface (BtS) our design team philosophy is simple. Create the best functioning product, make it out of the finest materials available and then test it repeatedly in the environment continually refining it to ensure that it stands up to the rigors of the underwater realm. Our stainless steel ball-jointed arm sets, with their aluminum alloy clamps do just that. BtS arms and clamps outperform all others and are the best arm set value on the market today. Arm Features and Benefits: Streamlined/Low Drag - Tubular stainless steel design allows them to have the smallest surface area of any arm. Lightweight - BtS arms are lightweight due to their smaller profile and hollow core. They are perfect for the traveling diver. High strength - Manufactured of 304 stainless steel tubing, BtS ball-jointed arms are much stronger and more dura ble than aluminum alloy arms. The hard anodized, 6061 aluminum ball ends are pressed on at 5000 psi, then the ends are sealed with stainless steel cap screws. EPDM O-rings - We use the toughest rubber o-rings available. Ethylene propylene diene monomer (EPDM) M-class, rubber O- rings. They withstand the shear forces and friction between ball end and clamp better than any other. Arm Clamps BtS arm clamps offer stronger hold and better arm retention because of their specially beveled cut, which increases the contact area between ball and clamp. They do not require extreme clamp tension like some arms to maintain arm position. Finger tight is all you ll need. Easy to Maintain The same as your dive gear, just rinse and soak in fresh water after use. Limited Lifetime Warranty We stand behind our products at BtS with a limited lifetime warranty to the original purchaser. Made in USA - We can proudly say that all of our products are 100% made and assembled here in the USA. DOUBLE BALL ARMS 3 BLACK NON REFLECTIVE BtS ARMS These arms arm machined from 6061 solid aluminum round bar, they are then assemble the same as our stainless steel arms. These arms are even lighter than are stainless arms by more than a 1/2 ounce and will not reflect light underwater. 5 SINGLE BALL ARMS 5 DBA-5-BLK DBA-8-BLK
3 BtS *Buoyancy* Float System Our float system is easy to install, adjustable to suit personal needs, lightweight. Each 2.5" BtS or Ultralight float segment yields up to 4 oz. of positive buoyancy per float in fresh water, so even the heaviest underwater camera system will be "lightened up" substantially. Our floats are manufactured from a new high-tech, high density foam and have been thoroughly tested to well beyond sport diving depths. Available For *Ultralight* Arms #BF-1 #BF-5 #BF-7 #BF-1-ultra #BF-5-ultra #BF-7-ultra **Tested** **To 160 Feet** (No water retention dries in minutes!!!) 1 single float for BtS arms 5 piece float set for BtS Arms 7 piece float set for BtS Arms 1 single float for Ultralight arms 5 piece float set for Ultralight Arms 7 piece float set for Ultralight Arms
4 Redesigned 2018 BtS BALL CLAMPS #ACS #ACB #ACT These clamps hold even tighter than before with a micro fine adjustment and a smooth back for no snags. NEW long arm clamp (#ACS-LONG) Shown here with (#CSBM) and big blue video light #ACS-LONG
5 BtS Flex Arm Systems Beneath the Surface flex arms are the premium flex arm on the market today. We offer more important features and options than any other manufacturer. With over 100 different models available, BtS has the flex arm solution for everyone. BtS flex arms are designed to fit the most popular strobes and LED lights available. We have models that will accept lights from Big Blue, Light & Motion (Sola), Underwater Kinetics (Aqualite) as well as any round shaped lights in our Universal mount. We also offer either a double ball ended flex arm that can be used with any 1 arm clamps, or a single ball ended flex arm with a YS type light mount adapter for Sea and Sea strobes. Arm Features and Benefits: Flexibility - Our uniquely designed flex arms allow countless positioning of your strobe, or light very, even while shooting. This gives you the widest variety of possible lighting angles and positions for creative effect. Safety Cable All BtS flex arms come with a built-in 1/16" vinyl coated stainless steel safety cable that runs through the entire arm ensuring that you will never lose your valuable lighting equipment even if you accidentally disconnect the arm. Quick Disconnect - Is available on most of our flex arm models. This feature makes it fast and easy to break your system down, or to change lighting arrangement either in or out of the water. Ends - All of our flex arm ends and light mounts are machined out of solid Delrin bar stock to maintain our high quality standards. Easy to Maintain The same as your dive gear, just rinse and soak in fresh water after use. Lightweight - BtS flex arms are the lightest available. They are perfect for traveling divers! Limited Lifetime Warranty - We stand behind our products at BtS with a limited lifetime warranty to the original purchaser. Made in USA - We can proudly say that all of our products are 100% made and assembled here in the USA. Please see current price sheet for our selection of available flex arms.
6 *** Flex Arm Floats*** 3/4 *Buoyancy* For 1/2 and 3/4 loc-line Flex Arms 1/2 **TESTED TO 160 FEET** Our float system is easy to install, adjustable to suit personal needs, lightweight. Each of the.50 Loc-line arm floats will give you 2.75 oz. of positive buoyancy per float in fresh water, the.75 Loc-line float will give you 2.25 oz. of positive buoyancy per float in fresh water, so even the heaviest underwater camera system will be "lightened up" substantially. Our floats are manufactured from a new high-tech, high density foam and have been thoroughly tested to well beyond sport diving depths. #BF-FLEX piece float for ½ locline arms #BF-FLEX piece float set for ¾ locline arms #BF-FLEX piece float for ½ locline arms #BF-FLEX piece float set for ¾ locline arms BTS Port Floats BTS Port Float are avaible in three configurations Stepped, Tapered and Flat and are customizable with a simple hacksaw blade
7 ADAPTERS All of our BtS adapters are machined from the highest quality materials 6061 aluminum and Delrin. All aluminum adapter parts are hard anodized for low maintenance, hardware is 18-8 stainless steel, we use EPDM (ethylene propylene diene monomer (M-class) rubber) O-rings on everything we build they will far outlast any standard rubber #ISA Inon Strobe Adapter #BMBA This is for factory DSLR handles #SSOSAL Long YS Strobe Adapter #IKESA Ikelite Strobe Adapter #CSBM Cold Shoe Ball Mount #SSOSA YS Strobe Adapter #IFASA This converts a Inon strobe to YS #ALYSA This converts a UK Aqualite to YS #IKEBM This ball mount work for factory Ikelite quick disconnect handles. Nauticam Bushing Converts the 10mm metric thread on top of the Nuaticam housings to 1/4-20 for use of many standard adapter. #BMA-1420 #BMA
8 WARNING Do not over tighten screws or bolts. Striped threads are not covered under manufacturer warranty. Please see torque specs below. Spec. for 18-8 Stainless Steel (23.0 in-lbf ) (2.6 nm.) 1/4-20 (75.0 in-lbf ) (8.5 nm.) 5/16-18 (140.0 in-lbf) (16.0 nm.) Corrosion Manufacturer does not warranty product to be corrosion proof. The aluminum used in the manufacturing of these products are finish in a type 3 hard anodized finish which by its self will protect the aluminum parts from corrosion, but whenever you introduce a unlike metal to one another you will get a reaction in salt water. (I.E.) BtS tray components are connected with stainless steel hardware, both the tray and the screws are corrosion resistant by themselves but when you put them together in salt water you get a reaction, so the following is required to keep your tray free from corrosion and working great for years to come. #1 Apply a small amount of silicone grease to threads of screw every time they are assembled. (DO NOT OVER TIGHTEN ANY FASTENER). #2 After use completely disassemble tray and soak in hot soapy water to help remove salt crystals and rinse thoroughly, let all parts dry before storage. #3 Some parts you cannot disassemble (I.E.) arms and strobe adapters. These parts with get a buildup of a white powdery corrosion around where the stainless steel rod is pressed into the aluminum ball or adapter this is NORMAL. Follow the same procedure as stated above except use a soft tooth brush to scrub around connection point rinsing with warm water in between scrubbing. #4 All stainless steel hardware can be brushed free of any white corrosion with a small brass or stainless steel brush available at most hardware stores. #5 O rings will last for years with good maintenance and storage techniques if however you need a replacement they are available from Beneath the Surface in bags of 10 please call to order in an emergency you could use a size #209 O ring available at any hardware store. #6 Nylon webbing soak and rinse well after every use let dry completely before storage. Inspect for abrasions and ware after every use. #7 Delrin components rinse in warm water and let completely dry before storage. Delrin is in the plastic family there is no need to apply silicone grease to screw threads as it has no corrosion issues. #8 Clamps remove the T handle by unscrewing it from the bolt being careful not to lose the nylon washer or the spring use your ss brush to clean the treads of the bolt then apply a small amount of silicone grease and reassemble. Do this after every use and this clamp will last a lifetime. Limited Lifetime Warranty Warranty Beneath the Surface warrants this underwater camera tray or accessory components to be free from defects in material and workmanship for the life of the product to the original purchaser with proof of purchase. If you discover a defect in a product covered by this warranty, we will at our option replace the entire tray system or just the defective component. Exclusions This warranty covers defects in manufacturing discovered while using the product as intended by BtS. The warranty does not cover loss of theft, nor does coverage extend to damage caused by misuse, abuse, unauthorized modifications, improper storage conditions, corrosion of striped threads. This warranty does not cover parts that are subject to normal wear and tear replacement requirement, such as O rings and nylon webbing. Limits of Liability Should the product(s) fail your sole recourse in replacement, as described in the preceding paragraphs. We will not be held liable to you or any other party for any damages that result from the failure of this product. Damages excluded include, but not limited to, lost profits, lost equipment, damages to other equipment, and incidental or consequential damages arising from the use, or inability to use this product. In no event will Beneath the Surface be held liable for more than the amount of your purchase price, not to exceed the current list price of the product and excluding tax, shipping and handling charges. Disclaimer Beneath the Surface disclaims any other warranties, express or implied. By using this product, the user accepts the terms described herein. How to obtain service under this warranty Contact us using the following methods. By telephone (909) am to 5pm PST By the surface1.com Requirements Return shipping cost to be paid for by the buyer of the product. Replacement shipping will be paid for by Beneath the Surface.
SIX R (P ) AND SEVEN R (P ) POSITION CYLINDERS Service Information
SIX R431006322 (P -063892-00001) AND SEVEN R431006321 (P -063981--00002) POSITION CYLINDERS Service Information The six and seven position cylinders are medium duty pneumatic positioning devices that operate
More informationINSTRUCTIONAL MANUAL
INSTRUCTIONAL MANUAL PFCS INTERFACE BOX FOR ATLAS COPCO TORQUE TOOL MODEL KEI-965 96-084.doc Page 1 of 6 10/14/03 GENERAL DESCRIPTION The KEMKRAFT Model KEI-965 PFCS Interface Box was developed to seamlessly
More informationModel No Product Name Handpiece Only Complete System
Ney QC 700 E 30,000 RPM IECE 30,000 R N HANDPIE IVEN HA R DRIV AIR D Owner & Operator's Manual Model No Product Name 7201326 Handpiece Only 7201325 Complete System Description Page Safety... 2 Setup...
More informationS&S. Installation Instructions: S&S Stealth Air Cleaner Kit for Harley-Davidison Models With Stock Cable Operated Delphi EFI
Instruction 510-0388 01-11-16 Version 1 Copyright 2016 by S&S Cycle, Inc. All rights reserved. Printed in the U.S.A. S&S Cycle, Inc. 14025 Cty Hwy G PO Box 215 Viola, Wisconsin 54664 Phone: 608-627-1497
More informationATD /8 x 50 Retractable Air Hose Reel Owner s Manual
ATD-31166 3/8 x 50 Retractable Air Hose Reel Owner s Manual Features Heavy-gauge, all-steel reel assembly 8-position ratchet mechanism locks reel at desired hose length 5-position adjustable roller outlet
More informationPISTOL CALIBER SUPPRESSORS
PISTOL CALIBER SUPPRESSORS OWNERS MANUAL: HANDLING & SAFETY INSTRUCTIONS WARNING: READ THIS MANUAL AND THE OPERATOR S MANUAL FOR THE HOST FIREARM IN THEIR ENTIRETY BEFORE OPERATING THIS SUPPRESSOR. FAILURE
More informationRADROVER REAR RACK INSTALLATION MANUAL
RADROVER REAR RACK INSTALLATION MANUAL WWW.RADPOWERBIKES.COM We are here to help! Please contact us at SUPPORT@RADPOWERBIKES.COM or 1-800-939-0310 if you have questions. REV022216 Welcome Thanks you for
More informationCongratulations on your purchase of a JC Series Performer trike! The Performer JC Series is designed for everything from touring to commuting and
Congratulations on your purchase of a JC Series Performer trike! The Performer JC Series is designed for everything from touring to commuting and shopping in the city. The JC Series frames are made of
More information600 / 600FC OWNER'S MANUAL
PROGRESSION 600 / 600FC OWNER'S MANUAL Issue 2 / Version E - Dec. 10, 1997 Copyright 1997 GAMMA Sports - All Rights Reserved PROGRESSION 600 / 600FC OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY
More informationGETZ EQUIPMENT INNOVATORS PART NO.: 9G59554 MODEL: MS 36 SC-R HYDROSTATIC TEST PUMP
GETZ EQUIPMENT INNOVATORS PART NO.: 9G59554 MODEL: MS 36 SC-R HYDROSTATIC TEST PUMP LIMITED WARRANTY Getz Equipment Innovators warrants its products, and component parts of any product manufactured by
More informationALTERNATOR RACKS 135, 170 & 190 INSTRUCTIONS
Figure A Item # Description Quantity 1 Alternator Rack 1 1 3 4 11 5 10 8 2 Lower Mount Kit (see detail) 2 3 16mm M5 Swivel-Mount Bolt 2 4 M7 Washer 2 5 M6 Lock Nut 2 6 Lock Washer 2 7 Swivel Mount 2 8
More informationROPV R40 E Series User Manual
HARBIN ROPV INDUSTRY DEVELOPMENT CENTER ROPV R40 E Series User Manual For Use with the Following ROPV Pressure Vessel Models: R40 300E R40 450E Headquarters Tel:(+86)451-82267301 Fax:(+86)451-82267303
More informationPaintball Marker. User s Manual. Direct Feed. SC: Stock Class. VSC: Vertical Air Stock Class. 530 South Springbrook Road Newberg, OR 97132
Paintball Marker User s Manual Direct Feed SC: Stock Class 530 South Springbrook Road Newberg, OR 97132 VSC: Vertical Air Stock Class www.phantomonline.com Component Concepts, Inc., 530 South Springbrook
More informationTsubaki Sprocket Capabilities
Tsubaki Sprocket Capabilities Introduction to Made-to-Order Sprockets At Tsubaki, our commitment is to bring you the highest value in the industry today. Period. And as a full line supplier of power transmission
More informationCylinder Tilt Saddle Instruction Manual
Cylinder Tilt Saddle Instruction Manual MODELS: SDT05, SDT10, SDT15, SDT25 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 - Fax: 816-448-2142 E-mail: sales@bvahydraulics.com
More informationTOP VALVE. Pat. #5,857,486 & 5,944,050. Mid-Range Pressure PSIG Back Pressure and Pressure Relief Valves. Instruction Manual
TOP VALVE Pat. #5,857,486 & 5,944,050 Mid-Range Pressure 50 232 PSIG Back Pressure and Pressure Relief Valves Instruction Manual Please Note: This instruction manual provides detailed information and instructions
More informationSunset Swings By Health in Motion, LLC
Sunset Swings By Health in Motion, LLC Model 421 Lounge Swing Assembly and Operation Manual Record Serial Number Here www.sunsetswings.com by Health In Motion, LLC. 1/30/2013 Caution: READ! VERY IMPORTANT
More informationRG2200 BC Integrated Octopus
175 NW Washington Street Lake City, Florida 32055, USA Web: www.diverite.com Phone: 386.752.1087 Fax: 386.755.0613 RG2200 BC Integrated Octopus Product description The Rite Source is both a BC inflation/deflation
More informationCocoa Patio Pond with Lit Spillway
Cocoa Patio Pond with Lit Spillway REMINDER CALL 1-888-755-5641 BEFORE RETURNING TO STORE. PACKAGE CONTENTS ITEM # GQSPPB/GQSPPW Questions, problems, missing parts? Before returning to your retailer, call
More informationFLANGED TWO-PIECE BALL VALVES
INTRODUCTION This instruction manual includes installation, operation, and maintenance information for FNW flanged split-body ball valves. This manual addresses lever operated ball valves only. Please
More informationGemini Owner s Manual
Gemini Owner s Manual WARNING - Improper use of the Gemini Breathable Inflator may result in serious injury or death. Do not attempt to use this product unless you have received certified scuba instruction
More informationOPERATION AND INSTRUCTION MANUAL Swivel Anchor Model: HD26248
OPERATION AND INSTRUCTION MANUAL Swivel Anchor Model: HD26248 IMPORTANT!!! ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH.
More informationThis document to be used with Hurley traditional Davits
~ InstructIon Manual ~ This document to be used with Hurley traditional Davits WarnIngs WarnIng - Failure to install, maintain, protect, and operate the system properly can cause malfunction resulting
More information3" UC Ultra-Chuck Durable Lightweight Air Inflated Bladder Chuck Operation/Repair Manual. (76.2 mm) DOUBLE E COMPANY, INC.
3" UC-3000 (76.2 mm) Ultra-Chuck Durable Lightweight Air Inflated Bladder Chuck Operation/Repair Manual DOUBLE E COMPANY, INC. 319 Manley Street, West Bridgewater, MA 02379 U.S.A. Tel: (508) 588-8099 /
More informationOWNER S MANUAL. This manual contains; IMPORTANT SAFETY INFORMATION INSTALLATION INSTRUCTIONS MAINTENANCE FACTORY SERVICE REPAIR PARTS WARRANTY
OWNER S MANUAL This manual contains; IMPORTANT SAFETY INFORMATION INSTALLATION INSTRUCTIONS MAINTENANCE FACTORY SERVICE REPAIR PARTS WARRANTY Models covered; PA506 EL506 Ergonomic Tool Arms, LLC PO Box
More informationYoke Block Instruction Manual
Yoke Block Instruction Manual ! WARNING IMPORTANT: READ MANUAL COMPLETELY BEFORE OPERATING THIS DEVICE This manual contains instructions on periodically required checks to be performed by the user. These
More informationMulti-Probe Sampling System User Guide & Manual
Multi-Probe Sampling System User Guide & Manual Rev. 06/05/12 Part #22200012 Table of Contents CHAPTER 1: SYSTEM DESCRIPTION... 2 FUNCTION AND THEORY... 3 SYSTEM COMPONENTS... 4 CHAPTER 2: SYSTEM INSTALLATION...
More informationORRA SPINNING REEL INSTRUCTION MANUAL (DRAFT)
ORRA SPINNING REEL INSTRUCTION MANUAL (DRAFT) a. Congratulations b. Pictures of Components c. Family Info d. How to Fill the Spool with Line e. Handle Assembly f. Anti-Reverse g. Drag Adjustment h. Reel
More informationVOLLEYBALL SPIKE TRAINER. Assembly Instructions. Owner s Manual. Model # VST-400. Club Volleyball Gear
VOLLEYBALL SPIKE TRAINER Model # VST-400 Wall-mount Volleyball Spike Trainer with 28 height adjustment range Assembly Instructions Owner s Manual Club Volleyball Gear 18434 Technology Drive, Morgan Hill,
More informationQuadratec Delrin Door Hinge Pin Bushings for Jeep Wrangler YJ & TJ 94-06
Quadratec Delrin Door Hinge Pin Bushings for Jeep Wrangler YJ & TJ 94-06 Installation and Instruction Manual: Item # 55014.6101 & # 55014.6102 Kit # 55014.6101 for 94-99 Vehicles Kit Contents for 2 Door:
More information2018 ACCESSORY ATTACHMENTS OWNER S MANUAL
2018 ACCESSORY ATTACHMENTS OWNER S MANUAL WWW.RADPOWERBIKES.COM We are here to help! Please contact us at SUPPORT@RADPOWERBIKES.COM or 1-800-939-0310 if you have questions. REV031418 Welcome Thanks you
More informationTOP VALVE. Pat. #5,857,486 & 5,944,050. High Temperature: max. 300 F (149 C) Back Pressure And Pressure Relief Valves. Instruction Manual
TOP VALVE Pat. #5,857,486 & 5,944,050 High Temperature: max. 300 F (149 C) Back Pressure And Pressure Relief Valves Instruction Manual PLEASE NOTE: This instruction manual provides information and instructions
More information807 E. Parkridge Ave. Corona, CA ACCU Fax:
807 E. Parkridge Ave. Corona, CA 92879 1-888-ACCU-372 951-479-0909 Fax: 951-479-0305 www.accuratefishing.com OSS MAGNUM TWINDRAG REEL USAGE MANUAL CONTENTS Features 1 Getting Acquainted 2 Operation 3 AccuCast
More informationFLANGED TWO-PIECE BALL VALVES
INTRODUCTION This instruction manual includes installation, operation, and maintenance information for FNW flanged split-body ball valves. This manual addresses lever operated ball valves only. Please
More informationVOLLEYBALL SPIKE TRAINER. Assembly Instructions. Owner s Manual. Model # VST-300. Club Volleyball Gear. For fixed-height Basketball Hoop Systems
VOLLEYBALL SPIKE TRAINER Model # VST-300 For fixed-height Basketball Hoop Systems Assembly Instructions Basketball Hoop System Not Included Owner s Manual Club Volleyball Gear 18434 Technology Drive, Morgan
More informationPlease Do Not Return This Product To The Store!
MODEL NUMBER: GM000W - GAMEMAKER TORCH O W N E R ' S M A N U A L PLEASE READ AND FOLLOW THIS MANUAL IN ITS ENTIRETY BEFORE USE. DOING SO WILL PROVIDE HELPFUL HINTS THAT WILL AID IN GETTING MAXIMUM USE
More informationCHEMICAL INDUCTION KIT (Pt.No Issue 6, October 2015)
CHEMICAL INDUCTION KIT (Pt.No.2400-0740 Issue 6, October 2015) DESCRIPTION The C-Dax Chemical Induction Kit is an accessory kit for the GoldLine range of three point linkage sprayers. The system operates
More informationTECHNICAL SUPPORT DOCUMENT FULL SUSPENSION MODELS C7 C9 WARRANTY SMALL PARTS FRAME SPEC/SERVICING
2016-2018 FULL SUSPENSION MODELS C7 C9 WARRANTY SMALL PARTS FRAME SPEC/SERVICING 2016-2018 FULL SUSPENSION MODELS C7 C9 PG.i WARRANTY INFORMATION COMPLETE BIKES ONE YEAR LIMITED WARRANTY NORCO Bicycles
More informationVertical Lifeline. Ladder Climb. User Instructions. 3M Occupational Health and Environmental Safety. Fall Protection Equipment
3M Occupational Health and Environmental Safety Fall Protection Equipment Ladder Climb Vertical Lifeline User Instructions User Instructions for the 3M TM Ladder Climb Vertical Lifeline System. Important:
More informationTRAVEL SENTRY APPROVED
LUGGAGE PADLOCKS 1 TRAVEL SENTRY APPROVED Every Travel Sentry Approved Lock has a special identification mark alerting the TSA and other airport security agencies that they can open this lock without destroying
More informationE8AA. Pressure Sensor of Stainless Steel Construction Is Ideal for a Wide Range of Applications. Pressure Sensor (Stainless Steel Diaphragm)
Pressure Sensor (Stainless Steel Diaphragm) CSM DS_E_3_1 Pressure Sensor of Stainless Steel Construction Is Ideal for a Wide Range of Applications Incorporates double diaphragms consisting of SUS316L stainless
More informationOPERATION AND INSTRUCTION MANUAL
OPERATION AND INSTRUCTION MANUAL Swivel Anchor Model: SWS100N-316-CTS Patent US # 8,424,638 WARNING: ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT
More informationOPERATION AND INSTRUCTION MANUAL Swivel Anchor Model: SWY100N
OPERATION AND INSTRUCTION MANUAL Swivel Anchor Model: SWY100N IMPORTANT!!! ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH.
More informationSterile Visual Flow Indicator
Sterile Visual Flow Indicator Sanitary Process Connection Installation / Operation / Maintenance Manual P.O. Box 1116 Twinsburg, OH 44087 Phone: 330/405-3040 Fax: 330/405-3070 E-mail: view@ljstar.com Web
More informationMAVERICK FOOSBALL TABLE
MAVERICK FOOSBALL TABLE Replacement Parts Order direct at or call our Customer Service department at (800) 225-7593 8 am to 5 pm Central Standard Time July 2010 UPC Code 7-19265-53446-4 Staple your receipt
More informationVOLLEYBALL SPIKE TRAINER. Assembly Instructions. Owner s Manual. Model # VST-200. Club Volleyball Gear. For height-adjustable Basketball Hoop Systems
VOLLEYBALL SPIKE TRAINER Model # VST-200 Basketball Hoop System Not Included For height-adjustable Basketball Hoop Systems Assembly Instructions Owner s Manual Club Volleyball Gear 18434 Technology Drive,
More informationAPCO ARV CLEAN WATER AIR RELEASE VALVES. Model 50A
APCO ARV CLEAN WATER AIR RELEASE VALVES Model 50A Instruction D12013 February 2017 Instructions These instructions provide installation, operation and maintenance information for APCO ARV Clean Water Air
More informationRG1200 Regulator System
RG1200 Regulator System UserGuide Date of purchase: www.diverite.com DEVELOPED BY COPYRIGHT NOTICE WARRANTY INFORMATION Dive Rite 175 NW Washington Street Lake City, FL 32055 Phone: 386.752.1087 Fax:
More informationPressure Relief Valve Instruction Manual
CVR3-M0_062017 Pressure Relief Valve Instruction Manual MODEL: CVR3 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website:
More informationUsing Your Bike Friday : Folding Rear Rack
Using Your Bike Friday : Folding Rear Rack Green Gear Cycling, Inc. 3364 W. 11th Ave. Eugene, OR 97402 800-777-0258 USA & Canada +1-541-687-0487 Int l +1-541-687-0403 Fax www.bikefriday.com info@bikefriday.com
More informationPRODUCT SUPPORT MANUAL YACHT BEAM 6M Searchlight Remote Control System with Joystick Remote Control Panel
PRODUCT SUPPORT MANUAL YACHT BEAM 6M Searchlight Remote Control System with Joystick Remote Control Panel The Yacht Group - 4545 Ponce de Leon Blvd. Coral Gables FL 33146 Tel. 305.667.5811 - Fax. 305.663.5551
More informationUser Operation Manual and Safety Instructions
PCP Airgun Charging Station 74 cu.ft. / 98 cu. ft. Carbon Fiber Tank & Accessories User Operation Manual and Safety Instructions BRAND: Air Venturi DESCRIPTION: PCP Airgun Charging System FILL PRESSURE:
More informationSEALED CONNECTORS FOR THE LIMIT SWITCHES
SEALED CONNECTORS FOR THE LIMIT SWITCHES LIST OF MODELS / Sealed connectors are used at the cable-connecting section of limit switches. Type and appearance Materials Features Target market Applications
More informationRG3100 and RG3100Ice Regulator System
RG3100 and RG3100Ice Regulator System User Guide www.diverite.com Date of purchase: www.diverite.com RG1208-5 & RG1208-5Ice www.diverite.com First Stage Regulator Product Description The RG1208-5 and RG1208-5Ice
More information602 STRINGING MACHINE OWNER'S MANUAL
PROGRESSION 602 STRINGING MACHINE OWNER'S MANUAL AL Issue 1- April 2000 Copyright 2000 GAMMA Sports - All Rights Reserved PROGRESSION 602 STRINGING MACHINE TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2...
More informationLSA-BAWMBL. Wall-Mounted Boom Arm INSTRUCTIONS
LSA-BAWMBL Wall-Mounted Boom Arm INSTRUCTIONS 1 Precautions Do not exceed the maximum load capacity. Always engage safety locks and devices where applicable. Product should be used between -22 F and 140
More informationWEATHERIZING INSTRUCTIONS
FOR PNEUMATIC MASTS The Will-Burt Company 169 S. Main Street Orrville, OH 44667 www.willburt.com TP-4744301-C, 2017 The Will-Burt Company Pneumatic Mast Warranty Will-Burt warrants its pneumatic masts
More informationCompact Triple Cabinet Outlet Station Model Installation and Operating Instructions
Compact Triple Cabinet Outlet Station Model 6258-1 Installation and Operating Instructions The Porter Compact Triple Outlet Station (6258-1) provides a quick, safe, and reliable method of connection to
More information200 STRINGING MACHINE
200 STRINGING MACHINE OWNER S MANUAL Issue 1 - July 2010 Provided by www.gssalliance.com 200 OWNER S MANUAL TABLE OF CONTENTS WARRANTY...PAGE 2 FEATURES...PAGE 3 ASSEMBLY INSTRUCTIONS...PAGE 4 MOUNTING
More informationaccidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS
18 GAUGE 1-1/4 INCH BRAD NAILER Model: 7611 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry.
More informationColor/Catalyst Dispense Valves
Instructions-Parts Color/Catalyst Dispense Valves 332454C EN To dispense color, catalyst, solvent, and acid in a ProMix PD2K Electronic Proportioning System with the color change option. For professional
More informationInstruction Manual LIMITED 1 YEAR WARRANTY. Hydraulic Punch Driver Read this material before using this product.
Instruction Manual Hydraulic Punch Driver 902-483 LIMITED 1 YEAR WARRANTY We make every effort to assure that its products meet high quality and durability standards, and warrant to the original purchaser
More informationDISASSEMBLING & REASSEMBLING CARTRIDGE INSTALLING SEATPOST ON BIKE
INTRODUCTION BILL OF MATERIALS SPECIFICATIONS & TOOLS PROCEDURES DISASSEMBLING & REASSEMBLING CARTRIDGE INSTALLING SEATPOST ON BIKE OPERATION OF SEATPOST GIANT LIMITED WARRANTY 1 INTRODUCTION Congratulations
More informationInstruction Manual. PE Pipe Squeeze-off Tool Model TR650
PE Pipe Squeeze-off Tool Model TR650 Instruction Manual For your personal safety READ and UNDERSTAND instructions before using tools. SAVE these instructions for future reference. SPECIFICATIONS Table
More informationOWNER'S MANUAL. Copyright 1999 ATS - All Rights Reserved
OWNER'S MANUAL AL Issue 2 - August 19, 1999 Copyright 1999 ATS - All Rights Reserved OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2... ASSEMBLY INSTRUCTIONS PAGE 4... MOUNTING THE RACQUET PAGE
More informationX-6FC STRINGING MACHINE OWNER'S MANUAL. Issue 1 - May Copyright 2004 GAMMA Sports - All Rights Reserved
X-6FC STRINGING MACHINE OWNER'S MANUAL Issue 1 - May 2004 Copyright 2004 GAMMA Sports - All Rights Reserved OWNER'S MANUAL GAMMA X-6FC TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2... FEATURES PAGE 3...
More informationMANUAL: Jumbo Siamese and Jumbo Wye
TASK FORCE TIPS FIRE FIGHTING EQUIPMENT MANUAL: Jumbo Siamese and Jumbo Wye INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE Read instruction manual before use. Operation of this device without understanding
More informationUnderwater Housing for Canon EOS M
Underwater Housing for Canon EOS M User Manual 1 Table of Contents 1. Introduction 2. Specifications 3. Function Controls 4. Set up Instructions 5. Use & Care of Housing 6. Service 7. Warranty 1. Introduction
More informationINTRODUCTION BILL OF MATERIALS SPECIFICATIONS & TOOLS PROCEDURES OPERATION OF SEATPOST GIANT LIMITED WARRANTY
INTRODUCTION BILL OF MATERIALS SPECIFICATIONS & TOOLS PROCEDURES OPERATION OF SEATPOST GIANT LIMITED WARRANTY 1 INTRODUCTION Congratulations on the purchase of your new GIANT CONTACT SWITCH seatpost. This
More informationOPERATION AND INSTRUCTION MANUAL Swivel Anchor Model: SWY100N
OPERATION AND INSTRUCTION MANUAL Swivel Anchor Model: SWY100N Patent # US 8,424,638 WARNING: ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS
More informationInstallation Instructions
Owner s Manual Installation Instructions It is extremely important that your ROCK SHOX fork is installed correctly by a qualified technician with proper tools. Improperly installed forks are extremely
More informationLUDLUM MODEL 239-1F FLOOR MONITOR. Revised December 2010
LUDLUM MODEL 239-1F FLOOR MONITOR Revised LUDLUM MEASUREMENTS, INC. 501 OAK ST., P.O. BOX 810 SWEETWATER, TX 79556 325/235-5494 FAX: 325/235-4672 STATEMENT OF WARRANTY Ludlum Measurements, Inc. warrants
More informationX-6 STRINGING MACHINE OWNER'S MANUAL. Issue 1 - May Copyright 2004 GAMMA Sports - All Rights Reserved
X-6 STRINGING MACHINE OWNER'S MANUAL Issue 1 - May 2004 Copyright 2004 GAMMA Sports - All Rights Reserved OWNER'S MANUAL GAMMA X-6 TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2... FEATURES PAGE 3...ASSEMBLY
More information807 E. Parkridge Ave. Corona, CA ACCU Fax:
807 E. Parkridge Ave. Corona, CA 92879 1-888-ACCU-372 951-479-0909 Fax: 951-479-0305 www.accuratefishing.com O WNER S WNER S M ANUAL CONTENTS Features 1 Getting Acquainted 2 Operation 3 2-Speed Function
More informationEVO Solid Downtube. Operators Manual for Downtubes fitted with zinc plated springs June 2004
EVO Solid Downtube Operators Manual for Downtubes fitted with zinc plated springs June 2004 Read this manual fully before operating the EVO Solid Downtube For all EVO Shearing Plants Head Office 46 Miguel
More informationINSTALLATION INSTRUCTIONS FOR: RE4548 JK FRONT COILOVER KIT
RUBICON EXPRESS 3290 MONIER CIR., RANCHO CORDOVA, CA. 95742 866-533-7706, www.rubiconexpress.com INSTALLATION INSTRUCTIONS FOR: RE4548 JK FRONT COILOVER KIT Safety Warning: Suspension systems or components
More informationRevolution Gurney Attachment
Revolution Gurney Attachment PART NUMBER: F-30RSA-S2 (2nd SERIES) WEIGHT CAPACITY: 350 POUNDS - STANDARD REVOLUTION 300 POUNDS - DEEP DRAFT REVOLUTION MANDATORY LEAVE THIS MANUAL WITH LIFT OWNER Read &
More informationOwners Manual MAX-10/45 Upper Receiver. Rev. A. NFA Warning. LAGE Manufacturing, L.L.C. 916 E. Baseline Rd. STE #113 Mesa, AZ 85204
Owners Manual MAX-10/45 Upper Receiver NFA Warning LAGE Manufacturing, L.L.C. 916 E. Baseline Rd. STE #113 Mesa, AZ 85204 CM109mk2-300 Rev. A This upper receiver is designed to be used with the M-10/45
More informationaccidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS
18 GAUGE 2 INCH BRAD NAILER Model: 7555 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry.
More informationSASK-A-POLE OWNERS AND USERS MANUAL
SASK-A-POLE OWNERS AND USERS MANUAL GENERAL INFORMATION The Saskatchewan Abilities Council s Sask-a-Pole accessibility and transfer aid is designed to help provide safe and easy access to chairs, beds,
More informationHelios Separable Tandem Manual
Helios Separable Tandem Manual This manual accompanies the Helios owners manual Introduction The separable kit fitted to your Helios tandem allows for even greater flexibility in the way you can enjoy
More informationFLANGED MULTI-PORT BALL VALVES
INTRODUCTION This instruction manual includes installation, operation and maintenance information for flanged multi-port ball valves. This manual addresses lever operated ball valves only. Please refer
More informationPure Water Power Purification System 4-Stage RODI Operations Manual
Pure Water Power Purification System 4-Stage RODI Operations Manual Flush Valve Lever Quick Disconnect for RO Water Testing Water Supply In Drain Hose Pure Water Out to Waterfed Pole New Machine Setup
More informationBEAM CLAY Soft Touch Bases A Series Premium Bases
Page 1 Soft Touch Bases A Series Premium Bases Page 2 Soft Touch Bases A Series Premium Bases Page 3 Soft Touch Bases C Series Convertible Bases Page 4 Soft Touch Bases C Series Convertible Bases Page
More informationGas Countertop Hot Plates
Gas Countertop Hot Plates This manual contains important information regarding your Patriot unit. Please read the manual thoroughly prior to equipment set-up, operation and maintenance. Failure to comply
More informationPLAQUE MFM0680 UNDERWATER LIGHT. Operating Instructions
PLAQUE MFM0680 UNDERWATER LIGHT Operating Instructions CONTENTS Preface... 3 Features... 3 Precautions... 3 Controls and Connectors... 4 Underwater Light PLAQUE MFM0680... 4 Power Supply Unit MPS021000
More informationInstallation Instructions JATCO Environmental Protection Tank Model J-5000CX
Installation Instructions JATCO Environmental Protection Tank Model J-5000CX The JATCO Environment Tank must be installed at a level which will allow the waste liquids to be disposed of to gravity flow
More informationOWNERS MANUAL. Model Shown with optional Primary Mooring Cleats. Portable Mooring System SAFETY OPERATION MAINTENANCE PARTS
OWNERS MANUAL Model 2400 Shown with optional Primary Mooring Cleats. Portable Mooring System SAFETY OPERATION MAINTENANCE PARTS CAUTION: Before using your new Pier Tender, read rules for Safety, Operation,
More informationINSTALLATION INSTRUCTIONS AT-SERIES ANCHOR ASSEMBLY PART NUMBER: F-04CAJP 450 LB. [204kg] MAXIMUM CAPACITY (PRO POOL LIFT)
INSTALLATION INSTRUCTIONS AT-SERIES ANCHOR ASSEMBLY PART NUMBER: F-04CAJP 450 LB. [204kg] MAXIMUM CAPACITY (PRO POOL LIFT) - WARNING- IMPORTANT SAFETY INSTRUCTIONS 1. READ AND FOLLOW ALL INSTRUCTIONS.
More informationOPERATING and MAINTENANCE INSTRUCTIONS MAXIS 6K Puller (M6K-M)
OPERATING and MAINTENANCE INSTRUCTIONS MAXIS 6K Puller (M6K-M) READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND SAFETY INFORMATION IN THIS MANUAL BEFORE OPERATING OR 04/17 (M6K-M) SERVICING THIS TOOL TABLE
More informationUpper Extremities USER MANUAL ARMS-ESF3GP. Stealth s User Manual and Maintenance Guide for the 3G Fixed Elbow Stop
Upper Extremities USER MANUAL ARMS-ESF3GP Stealth s User Manual and Maintenance Guide for the 3G Fixed Elbow Stop Customer Satisfaction 1.0 Stealth Products strives for 100% customer satisfaction. Your
More informationFACTORBIKES.COM. Assembly Manual V2.20
FACTORBIKES.COM V2.20 Introduction I Limited Lifetime Warranty On Bicycles And Framesets I Necessary Tools 01 Instructions 01 1 Seatpost 01 2 Di2 Cable Routing 03 3 Fork - Headset Barstem 05 4 Cutting
More informationThe P-Rod Double by The Airgun Lab Installation Instructions Revision F 08/01/2016 page 1 of 18
Installation Instructions Revision F 08/01/2016 page 1 of 18 Safety Warning, Terms and Conditions: Each P-Rod Double kit has been designed, manufactured, and tested to function with a standard Benjamin
More informationYoke Block Instruction Manual
Yoke Block Instruction Manual ! WARNING IMPORTANT: READ MANUAL COMPLETELY BEFORE OPERATING THIS DEVICE This manual contains instructions on periodically required checks to be performed by the user. These
More informationModel ASSEMBLY and OPERATING INSTRUCTIONS
QUICK CHANGE AIR BRUSH KIT Model 93506 ASSEMBLY and OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More informationVOLLEYBALL SPIKE TRAINER. Assembly Instructions. Owner s Manual. Model # VST-100. Club Volleyball Gear WARNING
VOLLEYBALL SPIKE TRAINER Model # VST-100 Assembly Instructions Owner s Manual WARNING To ensure safety, do not attempt to assemble this system without following all instructions carefully. Check entire
More informationBC Shackle. Made in the China. Alloy Steel Anchor Shackle. Instructions for handling and use - Please read in full before using this device
BC Shackle Made in the China Alloy Steel Anchor Shackle Instructions for handling and use - Please read in full before using this device Index 1.) Introduction 2.) Warnings / General Use Guidelines 3.)
More informationInstallation Instructions JATCO Environmental Protection Tank Model J-7000
Installation Instructions JATCO Environmental Protection Tank Model J-7000 The JATCO Environment Tank must be installed at a level which will allow the waste liquids to be disposed of to gravity flow into
More informationOPERATION AND INSTRUCTION MANUAL
OPERATION AND INSTRUCTION MANUAL Dual Extension Swivel Anchor Model: SWD100N-036 WARNING: ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS
More informationZIPP VUMAQUAD INSTALLATION INSTRUCTIONS
ZIPP VUMAQUAD INSTALLATION INSTRUCTIONS CAUTION All Zipp Crank and BB products should be installed by a professional bicycle mechanic using the appropriate tools. Zipp assumes no responsibility for damages
More information