Description Pressure range Connection thread Device Page
|
|
|
- Kory Briggs
- 5 years ago
- Views:
Transcription
1 Pressure Regulator Pressure range onnection thread Device Page max. 22 l/min miniature mbar 1 8 NPT V max. 22 l/min miniature mbar and flange V max. 0 l/min precise -1 +0,.4 / 10 bar G¼.03 max. 330 l/min precise mbar G¼ - G½ V10.04 max. 800 l/min precise / 10 bar G½ and G¾ R adjustment valve / 0 bar G G1 V04/V05.06 Pressure Regulator.01
2 Miniature Pressure Regulator, made of Plastic V800 / V900 Miniature precision regulator with diaphragm and high outlet pressure constancy, small dimensions, low weight. 20-turn hysteresis-free adjustment range allows sensitive pressure setting. Supply pressure max mbar ccuracy at pressure variation of 10 mbar: < 4 mbar pressure deviation at pressure removal/reapplication: < mbar pressure deviation setting accuracy: < 2.5 mbar ir consumption 0.3 l/min at mbar pressure djustment by plastic knob, adjusting screw or preset Gauge port not available Temperature range 4 to 66 / 39 F to 151 F Material ody: polysulfone Inner valve: stainless steel and acetal Elastomer: NR/una-N or flangeable 0-350/-850 mbar Dimensions Pressure Flow Order Preis adjustment rate range number D mm mm mm by l/min mbar regulator V900-W pressure max mbar, with constant bleed adjusting knob V900-10WK 9, V900-30WK 9, adjusting screw V900-10WOS 4, V900-30WOS 4, preset 22 indicate on order V ,00 reglator with flange V900-M pressure max mbar, with constant bleed adjusting knob V900-10MWK 89, V900-30MWK 89, adjusting screw V900-10MWOS 84, V900-30MWOS 84, preset 22 indicate on order V M 94,00 V WK V WK Special options, add the appropriate letter or number 1 8 NPT connection thread, width 40 mm V ,00 ccessories mounting bracket made of steel W ,00 V WOS Ø5, V V900-..WK V900-..WOS V W P M3x 1, ,9 NR O-Ring suppplied with unit OUTPUT INTPUT tank regulator V V M V M V M connection V900-10WK.02
3 Precision Pressure Regulator 0 l/min Diaphragm regulator ensuring high precision in both and positive pressure range. Supply pressure max. 1 bar ccuracy response sensitivity: < 2 mbar djustment by handwheel with locknut ir consumption max. 2.8 l/min in positive pressure range Flow rate 0 l/min* 1 in range, 900 l/min* 2 in positive pressure range Gauge port G¼ on both sides of the body, screw plugs supplied Temperature range -40 to 90 / -40 F to 194 F Material ody aluminium die-cast Inner valve: stainless steel and brass Elastomer: NR/una-N G 1 / / 10 bar Dimensions Kv Flow onnection Order Preis D value rate thread range number D mm mm mm mm m 3 /h m 3 /h* 1 l/min* 1 G bar pressure regulator pressure max. 1 bar, with constant bleed ,8 4 0 G¼ , , , , D 450,00 Special options, add the appropriate letter NPT connection thread -0.. N +10,00 tamper-proof cap made of aluminium, adjustment by screwdriver, total height 189 mm -0.. T ccessories pressure gauge Ø 63 mm, -1 0 bar, G¼ M ,00 mounting bracket made of steel W ,00 aspirator borehole pump gauge G¼ Ø9 58 or compressed air consumer D cross-section connection for downstream regulation bypass regulation W downstream regulation to close tank tank Note strainer is provided on the atmospheric or pressure side, but an additional filter is recommended. 1 ypass regulation Upstream installation is preferred when rapid exhaust of a tank or system is required. That way the acts directly upon the tank and is not being throttled by the regulator. 2 * 1 for compressed air at bar pressure and 0 bar outlet pressure * 2 for compressed air at bar pressure and 1.4 bar outlet pressure Gauges: see chapter for measuring devices Downstream regulation The regulator is located between the pump and the tank. The is energy-saving and it is easy to fill the tank to its optimal level with
4 Precision Pressure Regulator 330 l/min V10 High precision diaphragm regulator with high flow capacity. balanced valve minimizes the effects of variation. ccuracy response sensitivity: < 2 mbar djustment by handwheel with locknut Gauge port G¼ on both sides of the body, screw plugs supplied Temperature range 0 to 90 / 32 F to 194 F for appropriately conditioned compressed air down to -40 / -40 F Material ody: aluminium die-cast Elastomer: NR/una-N, optionally FKM Inner valve: stainless steel, brass, aluminium and steel G 1 4 up to G / -500 / mbar Dimensions Kv- Flow onnection Pressure Order Preis value rate thread range number D mm mm mm (m 3 /h) m 3 /h* 1 l/min* 1 G mbar Precision regulator pressure max mbar, without constant bleed V G V , V , V , G V , V , V , G V , V , V ,00 V10 Special options, add the appropriate letter NPT connection thread V N +10,00 Verstellsicherung made of aluminium, adjustment by screwdriver, total height 160 mm V T +35,00 FKM-Elastomere V V +110,00 ccessories pressure gauge Ø 63 mm, 0 bar down to -1bar, G¼ M ,00 mounting bracket made of steel W ,50 regulated cross-section 58 Ø W exhaust gauge G¼ exhaust tank regulated gauge port V10 Gauges: see chapter for measuring devices.04 gauge port with tamper-proof cap connection diagram V10-02
5 Precision Pressure Regulator 800 l/min R251 Diaphragm regulator ensuring high precision in both and positive pressure range. Supply pressure max. 1 bar ccuracy response sensitivity: < 2.5 mbar djustment by handwheel with locknut ir consumption without constant bleed Flow rate 800 l/min* 1 in range, 4200 l/min* 2 in positive pressure range Gauge port G¼ on both sides of the body, screw plugs supplied Temperature range -40 to 90 / -40 F to 194 F Material ody: aluminium die-cast Inner valve: stainless steel and brass Elastomer: NR/una-N G½ and G¾ 0./10 bar Dimensions Kv Flow onnection Order Preis D value rate thread range number D mm mm mm mm m 3 /h m 3 /h* 1 l/min* 1 G bar pressure regulator pressure max. 1 bar, without constant bleed R , G½ R , R , R251-04D 1.00, , G¾ R , R , R251-06D 1.00,00 Special options, add the appropriate letter NPT connection thread R N +10,00 tamper-proof cap made of aluminium, adjustment by screwdriver, total height 240 mm R T +35,00 FKM elastomer R V +165,00 R251 ccessories pressure gauge Ø 63 mm, -1 0 bar, G¼ M ,00 mounting bracket made of steel W ,00 handwheel spring signal diaphragm reliev valve control diaphragm connecting tube diaphragm assembly outlet aspirator tube D gauge G¼ Ø5.5 Ø5.5 2 inlet valve motor diaphragm cross section connection for downstream regulation 20 bypass regulation 1 R251 W downstream regulation to close tank tank Note strainer is provided on the atmospheric or pressure side, but 1 an additional filter is recommended. ypass regulation Upstream installation is preferred when rapid 22 exhaust of a tank or system is required. That way the acts directly upon the tank and is not being throttled by the regulator. * 1 for compressed air at bar pressure and 0 bar outlet pressure * 2 for compressed air at bar pressure and 1.4 bar outlet pressure Gauges: see chapter for measuring devices Downstream regulation The regulator is located between the pump and the tank. The is energy-saving and it is easy to fill the tank to its optimal level with. R
6 djustment Valves V04 / V05 pplication djustment When these valves reach a certain precalibrated degree, they introduce atmospheric air into the circuit to prevent the increase of the set value and keep it constant. They are used as safety valves on non-commissioned tanks or containers at high level and on cup lifting systems. V04: by rotating the knurled bush in both directions V05: by knurled head screw or adjusting knob on spindle with fine thread Temperature range -20 to 80 / -4 F to 16 F Material ody: nickel-plated brass Inner valve: spring steel and brass Elastomer: NR/una-N G 1 8 up to G bar Dimensions Flow onnection - Order Preis SW rate thread range number D mm mm mm m 3 /h* 1 l/min* 1 G bar adjustment valve regulator with external leakage V G V , G½ V , G¾ V , G V ,00 V04-01 V04-04 adjustment valve, precise V05 regulator with external leakage G¼ V , G V ,00 V04-06 V04-08 /F12 /F 24/30/35 V04-01 V04-04 / -06 / -08 V05-02 V05-08 tank /F25 /F32 V05-02 V05-08 V
Precision Pressure Regulators
hapter - Pressure Regulators Pressure range onnection thread Device Page 3 mm, high precision 0.0 2 / 8 bar G 1 8 RI.02 highly sensitive, max. 3 bar supply pressure 0.002 0.12 / 31 bar ¼"NPT R40.03 without
Description Supply pressure Pressure range Connection Device Page max. bar bar thread
Pressure Regulators Supply pressure Pressure range onnection Device Page max. bar bar thread Maxi -Series, robust, interlockable 1 0. 1.8 / 17 G¼ - G1 R0, R1.0 made of plastic, also for liquids 1,5 0 4
Description Pressure range Connection thread Device Page bar
Pressure Regulator Pressure range onnection thread Device Page bar factory-set pressure artridge regulator 2 / 3 / 4 / 6 artridge 233.02 without exhaust 7 x 25 2 / 3 / /0 G¼ia R3.03 for liquids 34 x 52
Volume Booster. Volume Booster Description Supply pressure Pressure range Connection Device Page max. bar bar thread
Volume ooster Supply pressure Pressure range onnection Device Page max. bar bar thread precise differential pressure also 17 0 1 / 10 and G 3 8 R50.02 differential pressure also 10 0.2 1 / 8 ¼ NPT 53.19
Volume Booster. Description Supply pressure Pressure range Connection Device Page max. bar bar thread
Volume ooster Supply pressure Pressure range onnection Device Page max. bar bar thread precise differential pressure also 17 0 1 / 10 and G 3 8 R50.02 ratio 1:1 up to 1: 17 0 10 and G 3 8 R750.03 different
FILTER REGULATOR. We produce with artistic attitude.
FILTER REGULTOR We produce with artistic attitude. DURY from Germany is expert in fluid control; the products are mainly for control and measurement of various gases, liquid pressure and flow, including
Power Valve: Precision Regulator. High precision, large capacity relief regulator
Power Valve: Precision Regulator Series VEX High precision, large capacity relief regulator port large exhaust capacity pressure reducing valve which utilizes a nozzle flapper mechanism available as air
Precision and Instrument Regulators 1/4" port size
Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38
Operating Manual. R280 Pressure regulator made of brass. 1. Intended Use
Pressure regulator made of brass Operating Manual 1. Intended Use Line or outlet pressure regulators- /reducer for Air, gases and liquids which is designed to effect reduction to a downstream pressure
ALE-32. Miniature General Purpose Regulators R07, R46 (non-repairable) Air line equipment. Technical data
ir line equipment Miniature eneral Purpose egulators 7, (non-repairable) 7 Full flow gauge ports Snap action knob locks pressure setting when pushed in Standard relieving models allow reduction of outlet
Calibrated or locked versions available. TREATMENT > Series MD regulators GENERAL DATA. New
> Series MD regulators Series MD pressure regulators New Ports with interchangeable cartridges: threaded (1/8, 1/4, /8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm Versions: single,
Series MX pressure regulators 3/
CATALOGUE > Release 8.8 > Series MX regulators Series MX pressure regulators MX2 ports: G/8, G1/2, G/4 - MX ports: G/4, G1 Manifold ports: G1/2 (MX2 only) Modular - Available with built-in pressure gauges
Precision pressure regulators LRP/LRPS
Precision pressure regulators LRP/LRPS q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement
Regulator: Modular Type with Back flow Mechanism. AR30K to 60K. Body size. Port size 1/4 3/8 1/2 3/4 AR40 AR50 3/4 1/2
Regulator: Modular Type with ack flow Mechanism R3 to 6 How to Order Regulator with a built-in mechanism that ensures a quick release of the outlet air pressure (built-in check valve with back flow mechanism).
Type 4708 Supply Pressure Regulator
Type 478 Pressure Regulator Application pressure regulators used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to. bar ( to 4 psi). to bar (8 to 9 psi)
How to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø
Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note
Type 4708 Supply Pressure Regulator
Type 478 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to.6 bar ( to 4 psi) or. to 6 bar (8 to
Flow control valves Series RFU - RFO 2/
CATALOGUE > Release 8.5 > Valves Series RFU - RFO Flow control valves Series RFU - RFO Unidirectional and bidirectional flow control valves Ports: M5, G1/8, G1/4, G3/8 and G1/ Nominal diameter: M5 = 1,5
Regulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K
Modular Type Regulator Series R Regulator Series R Model R M5 x.8 ccessory R2 /8, /4 R /4, 3/8 R3 /4, 3/8 R4 /4, 3/8, /2 Pages 36 through 4 Regulator with back flow mechanism Series RK R4-6 R5 R6 R2K RK,
Regulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K
Modular Type Regulator Series R Regulator Series R Model R M5 x.8 ccessory R2 /8, /4 R /4, 3/8 R3 /4, 3/8 R4 /4, 3/8, /2 Pages 36 through 4 Regulator with back flow mechanism Series RK R4-6 R5 R6 R2K RK
Direct Operated Precision Regulator Modular Style. Standard Specifications
1 Direct Operated Precision Regulator Modular Style Series P3 Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8) 258-92-www.stevenengineering.com
PRO-50 Instrument Supply Regulator
Features CRN Approved The PRO-50 Regulator has been granted a Canadian Registration Number. Sour Service Capability Available in NACE configurations that comply with NACE MR0175/MR0103. Environmental limits
LMU100/200 Series. Standard Specifications
Mist Spray Unit MU/ Series Intermittent spray to cutting and press gear chains, etc. Standard Specifications Inlet air Oil tank set range Oil Dynamic viscosity of oil ( C) Oil tank capacity (cm ) mbient
Type Pressure Regulator. for increased air capacity. Fig. 1: Type Pressure Regulator. Mounting and Operating Instructions EB EN
Type 4708-45 Pressure Regulator for increased air capacity Fig. 1: Type 4708-45 Pressure Regulator Mounting and Operating Instructions EB 8546-1 EN Edition March 2010 Definition of the signal words used
Inverse Proportional Pressure-Relief Cartridge, Size 10
Inverse Proportional Pressure-Relief Cartridge, Size 1 Q max = 12 l/min, p max = 3 bar Seated pilot, spool-type main stage, damped design 1 Description inverse-proportional pressure-relief valves are size
VACUUM REGULATORS CONTENTS
CAD drawing data catalog is available. ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS CONTENTS Small Regulators Features 759 Specifications, Order Codes, Flow Rate
Mounting and Operating Instructions EB 8546 EN. Supply Pressure Regulator Type Fig. 1 Supply pressure regulators
Supply Pressure Regulator Type 4708 Type 4708-5352 on Type 3730 Positioner Type 4708-52 with filter receptacle Type 4708-6252 on Type 3372 ctuator Fig. Supply pressure regulators Mounting and Operating
61 Series Pilots for Pilot-Operated Pressure Reducing Regulators
61 Series Pilots for Pilot-Operated Pressure Reducing Regulators June 2011 Introduction 61 Series pilots are used with Types 1098-EGR and EZL pressure reducing regulators. These pilots can also be integrally
Precision Regulator. Series Model Regulating pressure range Port size Page
Precision Regulator Series // Basic Type Air Operated Type Series Model Regulating pressure range Page Series Series Series Series Series.5 to MPa. to MPa. to.8 MPa /8 55.5 to MPa. to MPa /4 55. to.8 MPa.
Compact Regulator. ARX20 Series. 2.0 MPa compatible, piston type compact regulator ARJ
Compact Regulator 2 Series 2. MPa compatible, piston type compact regulator V SR X AP1 Compatible with inlet supply pressure of 2. MPa Employs a knob shape for easy operation Compact type (face to face
![[Instruments for vacuum measurement, checking and adjustment] 3](/thumbs/94/121874202.jpg "[Instruments for vacuum measurement, checking and adjustment] 3")
Maximum 0.85 MPa pressure setting Long-life, high flow perfect for balancer applications
Outstanding performance in extremely low pressure and low pressure ranges from 0.003 to. Realizing high performance, energy saving, and compact size. Realize precise pressure control in a pressure range
R133 HELYON. Brass high pressure regulator, suitable for compressed air, gas and liquid
R133 Brass high pressure regulator, suitable for compressed air, gas and liquid HELYON 5 Chemin du Jubin 6957 DARDILLY Tél. +33 () 7 5 16 7 - Fax +33 () 7 5 16 71 FEATURES High pressure regulator for cylinder
EXCELON QUIKCLAMP SYSTEM Pressure relief valves V72G, V74G - G1/4... G 3/4
V7 V7 EXCELO QUIKCLMP SYSTEM Pressure relief valves V7, V7-1/... 3/ Excelon design allows in-line installation or modular installation with other Excelon products Push to lock adjusting knob with tamper
Pressure regulator for water
Pressure regulator for water rass version with VGW and international drinking water approvals Stainless steel version with VGW approval Compact plastic version Manometer port at pressure output The water
ALE-40. R06 Miniature Brass Body Regulator. Water and Compressed Air Service 1/8" and 1/4" PTF Port Sizes. Air line equipment.
Air line equipment R Miniature Brass Body Regulator Water and Compressed Air Service 1/" and 1/" PTF Port Sizes Compact design, corrosion resistant construction Brass body with choice of plastic or brass
ALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa 0. MPa.0 MPa (Note
1200 Series Pressure Regulators
SEE MORE AT SORInc.com Request Quote 1200 Series Pressure SOR pressure regulators are durable, high performing instruments that are designed to provide reliable control of pressure in various stages of
64 Series Pressure Reducing Regulators
Instruction Manual Form 1245 64 Series March 2006 64 Series Pressure Reducing Regulators W1943 Figure 1. 64 Series Regulator Introduction Scope of Manual This manual provides instructions for the installation,
List of Contents VMA. System description 2. Individual Units Pre-Filters 3. Combinations 6. Accessories and Main spare parts 6
List of Contents VMA System description Individual Units Pre-Filters 3 Micro-Filters Activated-Charcoal-Filters 5 Combinations Accessories and Main spare parts Service Units G 1 / Pre-Filter Micro-Filter
Clean Regulator/Fluororesin Type
Clean egulator/fluororesin Type Series Washing/ssembly Procedure Washing parts: ody, Valve diaphragm and Diaphragm Parts Degreasing washing DI water washing lcohol washing ssembly Inspection Wetted part
Proportional Flow Valves
Chapter - Proportional Flow Valves Flow rate Connection thread Device Page portable meter, for many gases 2 100 ml / 450 l/min G¼, G½ VG.02 mass meter for gases 5 100 ml / 6000 l/min G¼ - G1 PVM.04 mass
R300 HELYON. Brass high pressure regulator, for compressed air, gas and liquids
HELYON 5 Chemin du Jubin 69570 DARDILLY Tél. +33 (0)4 72 52 16 70 - Fax +33 (0)4 72 52 16 71 R300 Brass high pressure regulator, for compressed air, gas and liquids FEATURES Pressure regulator for inlet
670 Series Panel-Mounted Loading Regulators
November 1992 Bulletin 62.3:670 670 Series Panel-Mounted Loading Regulators The Types 670, 6, 674, and 675 panel-mounted loading regulators (figures 1, 2, 3 and 6) are compact, rugged units used primarily
Air preparation units
Overview Description Page Characteristics Dimensions Order instructions Type overview unit three-piece 44, 45, 48 52 6 unit two piece 44, 45, 48 52 6 Filter-regulator 44, 45, 48 53 6 Filter-water-separator
HERZ-Motorised flow controler
HERZ-Motorised flow controler Control and regulating valve Data sheet 46, Issue 214 Dimensions in mm 4 close dimension 9,35 M DN G H1 H2 H2 + Actuator B1 B2 1 2 M 1 46 11 15 3/4 G 66 59 73 134 49 63 48
Versions. Benefits. Balancing DN15-32 DN40 DN50 DN15, DN20, DN25, DN32, DN40, DN50. Dimensions
Ballorex Delta Description The Ballorex Delta is a differential pressure control valve used in hydronic heating or cooling systems. By ensuring a constant differential pressure across motorized or static
Product Manual. Description. Specifications. CVS Type 1301F and CVS Type 1301G Regulator. Introduction
Product Manual CVS Type 1301F and CVS Type 1301G Regulator Introduction This CVS Controls product manual includes instructions for the installation, adjustment, maintenance and parts ordering of the CVS
ALF400 to 900, ALT-5/-9
Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Auto feed lube 00 00-0 00 00 00 900 - --IS- -9 AIR : OIL : Fluid Proof pressure Air. MPa 0. MPa.0 MPa (Note ) Operating pressure differential
Discontinued. Powers Controls. Technical Instructions Document No P25 RV Rev. 1, May, RV 201 Pressure Reducing Valves.
Powers Controls RV 201 Pressure Reducing Valves Description Features Product Numbers Dual Pressure PRV Technical Instructions Document No. 155-049P25 RV 201-1 Single Pressure PRV The RV 201 Pressure Reducing
IP2, IP2A and IP2D. Spirax-Monnier International Compressed Air Filter/ Regulators
Page 1 of 6 TI-P510-01 H Issue 5 IP2, IP2 and IP2D ISO 9001 Spirax-Monnier International ompressed ir Filter/ Regulators ert. No. LRQ 0963008 Description The IP range of Spirax-Monnier international compressed
Pressure reducing valves Series DRV/DRVM - DRVN/DRVMN
Pressure reducing valves Series DRV/DRVM - DRVN/DRVMN Main features Pressure reducing valves serve to reduce the pressure of the fluid downstream and to keep it at a constant level by varying its pressure
CASH VALVE TYPE KP BACK PRESSURE VALVES
A high capacity pilot operated back pressure valve that offers accurate control and dependable protection against overpressure conditions FEATURES Automatically maintains maximum pressure in a vessel or
Series IRV1000/2000/3000
CAT.ES60-16 A Regulator Series /2000/3000 Allows adjustment of vacuum line pressure Regulator Series /2000/3000 3 sizes offered in the series Variations have been expanded to three sizes from only one
R84G - Excelon Plus Modular System Pressure regulators
> Port size: 3/8... 3/4 (ISO G/PTF) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Easy to read flush mounted integrated pressure gauge as
Mounting and Operating Instructions EB EN. Type Supply Pressure Regulator. with increased air capacity
Type 4708-45 Supply Pressure Regulator with increased air capacity Translation of original instructions Mounting and Operating Instructions EB 8546-1 EN Edition March 2016 Note on these mounting and operating
New Product. Air Consumption 70% Down. Precision Regulator Air Saving Type. RPE Series PRECISION REGULATOR RPE SERIES CC-1072A
Air Consumption 70% Down New Product Precision Regulator Air Saving Type RPE Series PRECISION REGULATOR RPE SERIES Large Air Saving CC-1072A Air Consumption 70% Down. New Type Eco-friendly Precision Regulator
Series K Air service units G 1/8, G 1/4
Air service units G /8, G /4 Series FK Filter, G /8 G /4.02 Series RK Pressure regulator, G /8 G /4.04 Series FRK Filter/regulator, G /8 G /4.06 Series OK Lubricator, G /8 G /4.08 Series FROK Two piece
Pilot HON 625. Entwurf. Product information. serving the gas industry worldwide
Pilot HON 62 Entwurf Product information serving the gas industry worldwide Pilot HON 62 Application, characteristics Application Pilot for the gas pressure regulator HON 02 Pilot for outlet pressure control
Series 10-IRV10/20. Vacuum Regulator C08 IRV C08 IRV 20 A. How to Order. Standard connections. Single sided connections. Accessory w Nil G ZN ZP ZA ZB
Vacuum egulator eries -IV/ How to Order tandard connections IV C08 traight Clean series ody size Max. flow 140 L/min (N) Max. flow 240 L/min (N) L Fittings traight Connection tubing O.D. ymbol ubing O.D.
Precision Pressure Regulators. Precision Fluidics
Precision Pressure Regulators Precision Fluidics This is increased efficiency. Precision low flow carrier gas control for gas chromatography. Parker precision regulators, valves and controllers are designed
2-port and 3-port valves PN 16
OEM 2-port valves VVP459.10-0.63 to VVP459.25-6.3 3-port valves VXP459.10-0.63 to VXP459.25-6.3 3-port valves with bypass VMP459.10-0.63 to VMP459.20-4 2-port valves VVP459.25-6.3 to VVP459.40-25 3-port
IP2M, IP2AM and IP2DM Monnier International Compressed Air Filter/ Regulators
L ocal regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification
Regulator from 1800 B series
Regulator from 1800 B series Regulator from 1800 B series Measuring of industrial gases frequently requests a precise pressure regulation for the purpose of dosage and proccesing. UNIS FAGAS has two kinds
Type 4708 Supply Pressure Regulator
Type 708 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point range 0.5 to bar (8 to 90 psi) The pressure regulator
BL68 - Olympian Plus, plug-in system Filter/regulators and lubricators
>> Port size: 3/4... /2 (ISO G/ PTF) >> Complete air processing units pre-assembled, ready to install Technical features Medium: Compressed air only Maximum operating pressure: 7 bar (246 psi) Pressure
627 Series Pressure Reducing Regulators
627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated pressure reducing regulators (Figure 1) are for low and high-pressure systems. These regulators can be used with natural
ALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa Max. operating pressure
Air service units series K G1/8, G1/4
Air service units series K Series FK Filter 12.011 Series RK Pressure regulator 12.012 Series FRK Filter/regulator 12.013 Series OK Lubricator 12.014 Series FROK Two piece air service unit 12.015 Series
B74G - EXCELON Modular System General purpose filter/regulator
> Port size: /8... / (ISO G/PTF) > Excelon design allows in-line installation or modular installation with other Excelon products > Push to lock adjusting knob with optional tamper resistant accessory
1800CPB2 Service Regulators Maximum Inlet Pressure 125 PSIG
A C E D SB-8520.2 1800CPB2 Service Regulators Maximum Inlet 125 PSIG AMC Quality System QMI is Accredited by: C R E D I T ISO 9001 Certified Certificate #006697 R E ANSI RAB G I S T R A R Dutch Council
S300 Series. Valve Link. Features. Fisher Controls
S0 Series Self-Operated Type VL FIELDVUE Regulators Valve Link Fisher Controls May 198 Bulletin 71.1:S0 The S0 Series self-operated, spring-loaded regulators are used for pressure-reducing control in a
CALEFFI. Flow rate metering device. 683 series 01040/10 GB. Function
low rate metering device 683 series CCRI 040/ GB ISO 900 M 64 ISO 900 No. 0003 unction he flow rate metering device is used to measure the flow rate within a circuit. When used for central heating purposes,
ANDERSON GREENWOOD SERIES 9000 POSRV INSTALLATION AND MAINTENANCE INSTRUCTIONS
Procedure-assembly-functional test and performance requirements 1 SCOPE 1.1 This document establishes the general procedure for assembly, functional testing and normal performance requirements of low Series
Related products. Components for air preparation and pressure adjustment / F.R.L. unit. Pressure gauge. Indidcator
Related products Pressure gauge / indicator omponents preparation and pressure adjustment / unit Refrigerating ir uto. drain ir Pressure gauge ONTENTS Pressure gauge assembly (G401-W) 660 With safety mark
Leak free Pipe Rupture Valve for Excavators
Leak free Pipe Rupture Valve for xcavators Series motion and progress Reference: 3 P 9575 1/11.6 Classification: 43.325.355...325.35 1/17 Contents Page 1 General description................................................................
Filter pressure regulator, Series AS3-FRE G 3/8 - G 1/2 filter porosity: 5 µm lockable for padlocks with pressure gauge suitable for ATEX
Filter regulator, Series AS3-FRE G 3/8 - G 1/2 filter porosity: 5 µm lockable for padlocks with gauge suitable for ATEX 1 00119372 Version Parts Mounting orientation Working min./max. Medium Medium temperature
1800CPB2 Service Regulators
SB 8520.5 1800CPB2 Service Regulators Maximum Inlet Pressure 125 PSIG Table of Contents 1800CPB2 Regulator Information................ 2-3 1800CPB2 Capacity Performance................ 4-6 1-1/4" Models,
High precision pressure regulators G1/4" R210 / R220 / R230 Series
R210 - R230 High precision pressure regulators G1/4" High Precision Pressure Regulators R210 / R220 / R230 Series FLUIDTECHNIK BOHEMIA s. r. o. Olomoucká 87 tel : 548 213 233-235 CZ-627 00 Brno fax : 548
Series 44 Self-operated Pressure Regulators. Type 44-1 B Pressure Reducing Valve. Type 44-6 B Excess Pressure Valve. ANSI version
Series 44 Self-operated Pressure Regulators Type 44-1 B Pressure Reducing Valve Type 44-6 B Excess Pressure Valve ANSI version Application Set points from 3 to 290 psi (0.2 to 20 bar) with valves ½ NPT
T208VR Series Tank Blanketing Vacuum Regulator
February 2014 T208VR Series Tank Blanketing Vacuum Regulator Figure 1. Typical T208VR Series Vacuum Regulator Introduction The T208VR Series direct-operated vacuum regulators are used where a decrease
Pilot Check Valve: Metal Body Type
INFORMATION Pilot Check Valve: Metal Body Type The use of a metal body improves strength and environmental resistance. Temporary intermediate stops are possible. *1 *1 Precise intermediate stops are not
Regulator for 2 MPa ARX 20. How to Order. Bracket. Pressure gauge. Port size 1/8 1/4. Panel nut
Regulator for 2 MPa RX 2 How to Order RX2 1 Regulator 1 Regulating pressure.5 to.85mpa {.51 to 8.7kgf/cm²}.5 to.3mpa {.51 to 3.1kgf/cm²} Thread type Nil N F Rc(PT) NPT (PF) Port size 1 2 ccessories/options
1800C and 1800C-HC Service Regulators
SB 855.9 800C and 800C-HC Service Regulators Maximum Pressure 5 Table of Contents 800C Regulator Information...................... 800C-HC Regulator Information.................. 800C and 8C Service Regulators...............
1301 Series High-Pressure Regulators
Instruction Manual Form 1111 Types 1301F and 1301G March 2013 1301 Series High-Pressure Regulators! WARNING Failure to follow these instructions or to properly install and maintain this equipment could
BERMAD Waterworks. Level Control Valve with Bi-Level Vertical Float. 700 Series Model B. Features and Benefits. Major Additional Features
Level ontrol Valve with i-level Vertical Float Reservoir filling Very low supply-pressure Low noise generation Energy cost-critical systems Systems with poor water quality Reservoir outlet Distribution
4/2 way Pneumatic Solenoid Valve
4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11
Type 1098-EGR. Pilot-Operated Valve Link Regulators. Features. Fisher Controls
Type 1098-EGR and Type 1098H-EGR VL1000 FIELDVUE Pilot-Operated Valve Link Regulators Fisher Controls January 1982 Bulletin The Type 1098-EGR and Type 1098H-EGR regulators (figure 1) provide economical
Series 44 Self-operated Pressure Regulators. Type 44-1 B Pressure Reducing Valve. Type 44-6 B Excess Pressure Valve
Series Self-operated Pressure Regulators Type -6 B Excess Pressure Valve Application Set points from 0.2 to 20 bar with valves G ½, G ¾, and G as well as DN, DN 2, DN 0, and DN 0 Nominal pressure PN 2
Water valve Type WVO. Data sheet MAKING MODERN LIVING POSSIBLE
MAKING MODERN LIVING POSSIBLE Data sheet Water valve Type WVO Water valve type WVO is used for regulating the flow of water in refrigeration plant with water-cooled condensers. The water valve gives modulating
DS05C,D,G Dial Set Pressure Regulating Valves
DS05C,D,G Dial Set Pressure Regulating Valves APPLICATION The Honeywell DS05C,D,G Dial Set Pressure Regulating Valve is a high quality pressure regulating valve that maintains a constant outlet pressure
Microregulator 039 1/8-1/4
09/11/15 TECH DATA SHEET 675 Microregulator 1/8-1/4 Sensitive high performance model, high stability with low load losses and big flow rate. Downstream overpressures quickly eliminated. Can be wall mounted
Series 44 Self-operated Pressure Regulators. Type 44-0 B Pressure Reducing Valve. ANSI version
Series 44 Self-operated Pressure Regulators Type 44-0 B Pressure Reducing Valve ANSI version Application Set points from 3 to 290 psi (0.2 to 20 bar) with valves ½ NPT to 1 NPT as well as NPS ½ and 1 Pressure
HP/UHP Spring-Loaded Regulator
Description HP (High Purity) and UHP (Ultra High Purity) products are for service where the product must be kept free of contamination. The design is kept simple to minimise dead areas where contaminants
INSTRUCTION MANUAL. CVS P37 LP Gas Reducing Regulator
INSTRUCTION MANUAL CVS P37 LP Gas Reducing Regulator The CVS Controls P37 Regulator is a non-relieving, pressure reducing regulator suitable for use in LP gas applications (Natural Gas and Propane). As
Mounting and operating instructions EB 2530 EN. Self-operated Pressure Regulator. Pressure Reducing Valve Type M 44-2
Self-operated Pressure Regulator Pressure Reducing Valve Type M 44-2 Type M 44-2, connection G 1 4, K VS = 0.15 Type M 44-2, connection G 1, K VS = 6 Fig. 1 Type M 44-2 Pressure Reducing Valve Mounting
Model 10. Low-Medium Pressure Reducing Regulator
Model 10 Low-Medium Pressure Reducing Regulator General Specifications & Performance Characteristics The Model 10 is a pressure reducing regulator useful in a wide variety of applications. The Model 10
THE MF-400 SERIES. Operating and Service Manual. Series includes all variants of MF-400/401
THE MF-400 SERIES Operating and Service Manual Series includes all variants of MF-400/401 Issue A October 2013 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 4. Special
INSTALLATION INSTRUCTIONS. CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION
INSTALLATION INSTRUCTIONS CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION The CVS Controls 67CFR Filter regulator is a pressure reducing supply regulator typically used for pneumatic
Function. Code Automatic filling units with pressure gauge connection Size 1/2 Code Automatic filling units with pressure gauge Size 1/2
utomatic filling units series 55 cert. n ISO 9 5/5 G Replaces 5/ G unction he automatic filling unit is a device consisting of a pressure reducing valve with compensating seat, an inlet strainer, a shut-off