400 Series Flat Panel Monitor Arm Rotate Mount Double Pivot P/L

Size: px
Start display at page:

Download "400 Series Flat Panel Monitor Arm Rotate Mount Double Pivot P/L"

Transcription

1 User's Guide 400 Series Flt Pnel Monitor Arm Rotte Mount Doule Pivot P/L < 23ls. (10.44 kg) For the ltest User Instlltion Guide plese visit: 1 of 10

2 Hzrd Symols Review These symols lert users of sfety ondition tht demnds ttention. All users should e le to reognize nd understnd the signifi ne of the following Sfety Hzrds if enountered on the produt or within the doumenttion. Children who re not le to reognize nd respond ppropritely to Sfety Alerts should not use this produt without dult supervision! Symol Signl Word Level of Hzrd NOTE CAUTION WARNING ELECTRICAL A NOTE indites importnt informtion tht helps you mke etter use of this produt. A CAUTION indites either potentil dmge to hrdwre or loss of dt nd tells you how to void the prolem. A WARNING indites either potentil for property dmge, personl injury, or deth. An Eletril indites n impending eletril hzrd whih, if not voided, my result in personl injury, fire nd/or deth. Sfety Importnt! You will need to djust this produt fter instlltion is omplete. Mke sure ll your equipment is properly instlled on the produt efore ttempting djustments. This produt should move smoothly nd esily through the full rnge of motion nd sty where you set it. If movements re too esy or diffi ult or if produt does not sty in desired positions, follow the djustment instrutions to rete smooth nd esy movements. Depending on your produt nd the djustment, it my tke mny turns to notie differene. Any time equipment is dded or removed from this produt, resulting in hnge in the weight of the mounted lod, you should repet these djustment steps to ensure sfe nd optimum opertion. Wrning: Beuse mounting surfe mterils n vry widely, it is impertive tht you mke sure mounting surfe is strong enough to hndle mounted produt nd equipment. Cution: To void the potentil to pinh les it is importnt to follow the le routing instrutions in this mnul. Filure to follow these instrutions my result in equipment dmge or personl injury. 2 of 10

3 1 2 Components 1 1x A B C D 1x mm #8-32 1x 3/32" 2 3 1x 2x 1x 1/8" #10-23/8" #6-32x1/2" 4 3/16" 2x Mounting Height for Ergonomi Worksttion This mounting height is reommendtion for n ergonomi worksttion tht ommodtes user heights of 5 1-5'11". If user heights re different thn this, you should hnge mounting height to ommodte user heights. (Chnge mounting height one inh for every one inh differene in user heights). 6 (152 mm) Mounting height ssumes there is 6 (152 mm) distne etween the enter of your monitor mounting holes nd the top of the sreen. If your distne is smller, you should inrese mounting height ordingly, if your distne is lrger, you should derese your mounting height ordingly. 44 (1118mm) ( m) < 23ls. (10.44 kg) CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR! 3 of 10

4 1 Atth rm to wll. THIS SIDE UP #10-23/8" NOTE: Fsteners my unwind due to virtion used y movement of mounting solution over time. Inspet mounting solution for loose fsteners on routine sis. If desired, pply light duty thred loking dhesive to fsteners efore instlltion to prevent k-out. d 1/8" 4 of 10

5 2 Atth monitor to rm. 75 mm x 75 mm 100 mm x 100 mm #8-32 3/32" 5 of 10

6 3 Adjustment Step Importnt! You will need to djust this produt fter instlltion is omplete. Mke sure ll your equipment is properly instlled on the produt efore ttempting djustments. This produt should move smoothly nd esily through the full rnge of motion nd sty where you set it. If movements re too esy or diffiult or if produt does not sty in desired positions, follow the djustment instrutions to rete smooth nd esy movements. Depending on your produt nd the djustment, it my tke mny turns to notie differene. Any time equipment is dded or removed from this produt, resulting in hnge in the weight of the mounted lod, you should repet these djustment steps to ensure sfe nd optimum opertion. Inrese Lift Strength If the mounted weight is too hevy or this produt does not sty up when rised, then you'll need to inrese Lift Strength: Derese Lift Strength If the mounted weight is too light or this produt does not sty down when lowered, then you'll need to derese Lift Strength: NOTE: Continue with djustmentstep only if orret rm ounterlne ws not hieved in step. Doule Pivot Arm Mounted Weight Arm ls (kgs) Setting <5 (<2.3) A 6-7 ( ) B 8-9 ( ) C ( ) D ( ) E ( ) F ( ) G ( ) H ( ) I 23 (10.4) J K Inrese Lift Strength If the mounted weight is too hevy or this produt does not sty up when rised, then you'll need to inrese Lift Strength: Derese Lift Strength If the mounted weight is too light or this produt does not sty down when lowered, then you'll need to derese Lift Strength: 6 of 10

7 4 5 1/2" (12.7mm) 1/2" (12.7mm) 1/2" (12.7mm) Inrese Frition If this produt moves too esily, then you'll need to inrese frition: Derese Frition If this produt is too diffi ult to move, then you'll need to derese frition: Inrese Frition If this produt moves too esily, then you'll need to inrese frition: Derese Frition If this produt is too diffi ult to move, then you'll need to derese frition: 7 of 10

8 5 Inrese Frition If this produt moves too esily, then you'll need to inrese frition: Derese Frition If this produt is too diffi ult to move, then you'll need to derese frition: 1/2" (12.7mm) 6 1x #6-32x1/2" 8 of 10

9 7 NOTE: Leve enough slk in le to llow full rnge of motion. Cution: To void the potentil to pinh les it is importnt to follow the le routing instrutions in this mnul. Filure to follow these instrutions my result in equipment dmge or personl injury. d e f g 8 Atth overs. How to remove overs. 9 of 10

10 Set Your Worksttion to Work For YOU! Lern more out ergonomi omputer use t: Height Position top of sreen slightly elow eye level. Position keyord t out elow height with wrists flt. Distne Position sreen n rm's length from fe t lest 20 (508mm). Position keyord lose enough to rete 90 ngle in elow. Angle Tilt sreen to eliminte glre. Tilt the keyord k 10 so tht your wrists remin flt. To Redue Ftigue Brethe - Brethe deeply through your nose. Blink - Blink often to void dry eyes. Brek 2 to 3 minutes every 20 minutes 15 to 20 minutes every 2 hours. For lol ustomer re phone numers visit: Ergotron, In. 10 of 10

Workfit -SR, Dual Monitor Short Surface

Workfit -SR, Dual Monitor Short Surface User's Guide Workfit -SR, Dul Monitor Short Surfce Do not throw wy! Crdord locks needed for instlltion. Visit http://www.ergotron.com/workfi t-sr-instll for instlltion instructionl video. NOTE: 10 feet

More information

Workrite Sierra HX & HXL Assembly Instructions for 3-leg Electric Workcenters

Workrite Sierra HX & HXL Assembly Instructions for 3-leg Electric Workcenters Workrite ierr HX & HXL Assemly Instrutions for 3-leg Eletri Workenters #1500216- Rev Workrite ierr HX & HXL Eletri Workenters - Assemly Instrutions for 3-leg les Rer Leg rket* Qty: 2 List of rts, grouped

More information

10mm SHOWER PANEL SIZES 1000 & 1200 SIZES 500, 600, 700, 800 & 900 SIZES 1000 & 1200 OPTION 1 - PAGES 2-4 OPTION 2 - PAGES 2-5 OPTION 3 - PAGES 6-7

10mm SHOWER PANEL SIZES 1000 & 1200 SIZES 500, 600, 700, 800 & 900 SIZES 1000 & 1200 OPTION 1 - PAGES 2-4 OPTION 2 - PAGES 2-5 OPTION 3 - PAGES 6-7 SHOWER PANEL 785 / Issue / 5 SIZES 5, 6, 7, 8 & 9 SIZES & SIZES & OPTION - PAGES - OPTION - PAGES - 5 OPTION 3 - PAGES 6-7 Plese red these instrutions refully nd keep for future referene. Inorret fitting

More information

Reproduction. Not for. Mower - Roller Bar WARNING. Installation and Leveling Instructions. Attention Setup Personnel: Model: ,

Reproduction. Not for. Mower - Roller Bar WARNING. Installation and Leveling Instructions. Attention Setup Personnel: Model: , Mower - Roller Br Instlltion nd Leveling Instructions 4 Model: 9555, 9594 Attention Setup Personnel: 5 4 5 Model: 958, 9595 Model: 9559 Model: 959 The sfety wrnings provided in this guide nd in the trctor's

More information

WorkFit-S, Single LCD Mount, LD

WorkFit-S, Single LCD Mount, LD User's Guide WorkFit-S, Single LCD Mount, LD CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR! A B 6-16 lbs (2.7-7.3 kg) < 3 lbs (1.4 kg) A+B < 24 lbs

More information

WorkFit-S, Dual. User's Guide ENGLISH. A+B < 28 lbs (12.7 kg) B C. A+B+C < 31 lbs (14 kg) 6-14 lbs ( kg) 6-14 lbs (

WorkFit-S, Dual. User's Guide ENGLISH. A+B < 28 lbs (12.7 kg) B C. A+B+C < 31 lbs (14 kg) 6-14 lbs ( kg) 6-14 lbs ( User's Guide WorkFit-S, Dual CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR! A B C 6-14 lbs (2.72-6.35 kg) 6-14 lbs (2.72-6.35 kg) < 3 lbs (1.4 kg) A+B

More information

LX Desk Mount LCD Arm

LX Desk Mount LCD Arm ASSEMBLY INSTRUCTIONS LX Desk Mount LCD Arm * The lower most range of motion for vertical lift is decreased up to 4.5 (114 mm) when arm is adjusted to hold over 20lbs (9 kgs). 8.5 (216 mm) 5-25 lbs* (2.3-11.3

More information

StyleView Sit-Stand VL

StyleView Sit-Stand VL StyleView Sit-Stand VL High Traffic Areas www.ergotron.com User's Guide - English Guía del usuario - Español Manuel de l utilisateur - Français Gebruikersgids - Nederlands Benutzerhandbuch - Deutsch Guida

More information

WorkFit Dual Monitor Kit for WorkFit-T, TL, TLE, TX, and Corner Desk Converters

WorkFit Dual Monitor Kit for WorkFit-T, TL, TLE, TX, and Corner Desk Converters User's Guide WorkFit Dual Monitor Kit for WorkFit-T, TL, TLE, TX, and Corner Desk Converters 1 A B C D E M6 x 6mm 2 M4 x 5mm 3 M4 x 8mm M6 x 25mm 4 M6 x 20mm 1 For the latest User Installation Guide please

More information

Styleview HD Monitor Accessory

Styleview HD Monitor Accessory User's Guide Styleview HD Monitor Accessory For the latest User Installation Guide please visit: www.ergotron.com User's Guide - English Guía del usuario - Español Manuel de l utilisateur - Français Gebruikersgids

More information

HCI Examination Please answer in Swedish or English

HCI Examination Please answer in Swedish or English HCI Exmintion 02.06.04 8.45-12.45 Plese nswer in Swedish or English PLEASE HAND IN FIRST PAGE OF EXAMINATION SHEET (TES) IF YOU ANSWER MULITPLE CHOICE HERE PART I: NECESSARY FOR PASS (GODKÄNT) 1. Multiple

More information

AT200 INSTALLATION MANUAL

AT200 INSTALLATION MANUAL ENGLISH AT200 INSTALLATION MANUAL D29020CS416-XXX - SEAT & BOWL COMBINATION-CWH D23020CS11S-XXX - BOWL-CWH D28000AS416-XXX - SEAT / BODY UNIT-CWH Cnvs White (415) Tle of Contents 1. Oserve Listed Preutions

More information

WorkFit-S, Single LCD Mount, LD

WorkFit-S, Single LCD Mount, LD User's Guide WorkFit-S, Single LCD Mount, LD CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR! A B 6-16 lbs (2.7-7.3 kg) < 3 lbs (1.4 kg) A+B < 24 lbs

More information

User's Guide LX Dual Stacking Arm, Tall Pole

User's Guide LX Dual Stacking Arm, Tall Pole User's Guide LX Dual Stacking Arm, Tall Pole A B C D E 1 2 2x 8x 8x M4 x 10mm M4 x 10mm M5 x 6mm 2x 4x M3 x 6mm 2x 3 2x 2.5mm 4 M10 M10 x 95mm For the latest User Installation Guide please visit: www.ergotron.com

More information

User's Guide WorkFit Dual Monitor Kit for WorkFit-T and WorkFit-PD

User's Guide WorkFit Dual Monitor Kit for WorkFit-T and WorkFit-PD User's Guide WorkFit Dual Monitor Kit for WorkFit-T and WorkFit-PD A B C D E 2 M6 x 6mm M4 x 5mm M4 x 7mm M4 x 0mm 3 4 M4 x 8mm M4 x 0mm M6 x 25mm M6 x 30mm M6 x 35mm For the latest User Installation Guide

More information

LX Dual Side-by-Side Arm

LX Dual Side-by-Side Arm ASSEMBLY INSTRUCTIONS LX Dual Side-by-Side Arm 280 360 5-20 lbs (2.3-9.1 kg) 180 5-20 lbs (2.3-9.1 kg) 1 B 3/16" 5/32" 7/32" 70 2.5mm 3 1/8" (330 mm) 3/32" 2 13" D C 4 8x M4 x 10mm 5 4x 8x M4 x 10mm M3

More information

Fino Installation Instructions

Fino Installation Instructions Fino nstlltion nstrutions #1500154- Rev C Fino nstlltion nstrutions A Light Fixture Trnsformer Qty: 0 or 1 1 C Prts Rotting Mgneti Mounts Qty: 3 or 6 2 D Fixe Mgneti Mounts Qty: 4 or 8 2 E Rotting Woo

More information

pge 2 Owner's Mnul for Thern 4WS nd 4HS Series Power Winhes Two-Yer Limited Wrrnty Plese reord the following: Dte Purhsed: Model No.: Seril No.: This

pge 2 Owner's Mnul for Thern 4WS nd 4HS Series Power Winhes Two-Yer Limited Wrrnty Plese reord the following: Dte Purhsed: Model No.: Seril No.: This Red this Own er s Mn u l thor ough ly e fore op er t ing the equip ment. Keep it with the equip ment t ll times. Re ple ments re vil le from Thern, In. IMPORTANT: Plese reord produt informtion on pge 2.

More information

Robot Control User Manual /0718-V01

Robot Control User Manual /0718-V01 Root Control User Mnul 0021919/0718-V01 2 CONTENT 1. INTRODUCTION... 4 2. PROGRAM DESCRIPTION... 4 3. SKR CONNECTION... 5 4. PROGRAM INSTALLATION... 6 5. DRIVER INSTALLATION... 6 6. MAIN SCREEN... 7 7.

More information

MX mini Desk Mount LCD Arm

MX mini Desk Mount LCD Arm User's Guide MX mini Desk Mount LCD Arm Tools Needed For Grommet Hole Mounting Ø 5/16 (8 mm) Ø 3/8" (9.5 mm) For the latest User Installation Guide please visit: www.ergotron.com User's Guide - English

More information

Owner s Manual For TAC Series Planetary Gear Air Winches ORIGINAL TEXT

Owner s Manual For TAC Series Planetary Gear Air Winches ORIGINAL TEXT Red this Owner s Mnul thoroughly efore operting the equipment. Keep it with the equipment t ll times. Replcements re ville from Thern, Inc., PO Box 347, Winon, MN 55987, 507-454-2996. www.thern.com IMPORTANT:

More information

WorkFit-A, Single LCD Mount, LD

WorkFit-A, Single LCD Mount, LD User's Guide WorkFit-A, Single LCD Mount, LD A 5-15 lbs (2.3-6.8 kg) B < 5 lbs (2.27 kg) C < 2 lbs (0.9 kg) 0.78"-2.56" (20-65mm) For the latest User Installation Guide please visit: www.ergotron.com User's

More information

So Chic Dollhouse. Assembly Instructions Item #65078

So Chic Dollhouse. Assembly Instructions Item #65078 Please retain this information for future reference So hic Dollhouse ssembly Instructions Item #65078 To order replacement parts, please visit UTION: dult assembly required. Hardware contains small screws

More information

1 Measurement. What you will learn. World s largest cylindrical aquarium. Australian Curriculum Measurement and Geometry Using units of measurement

1 Measurement. What you will learn. World s largest cylindrical aquarium. Australian Curriculum Measurement and Geometry Using units of measurement Austrlin Curriulum Mesurement nd Geometry Using units of mesurement hpter 1 Mesurement Wht you will lern 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 Conversion of units Perimeter Cirumferene Are Are of irle Surfe

More information

Owner s Manual For 5122 Series Portable Davit Cranes ORIGINAL TEXT

Owner s Manual For 5122 Series Portable Davit Cranes ORIGINAL TEXT Red this Owner s Mnul thoroughly efore operting the equipment. Keep it with the equipment t ll times. Replcements re ville from Thern, Inc., PO Box 347, Winon, MN 55987, 507-454-2996. www.thern.com IMPORTANT:

More information

Tools Needed. LX HD Sit-Stand Desk Mount LCD Arm ENGLISH. 20" (508 mm) lbs ( kg) Maximum Screen Size* = 46 *Limited to 30 lbs maximum

Tools Needed. LX HD Sit-Stand Desk Mount LCD Arm ENGLISH. 20 (508 mm) lbs ( kg) Maximum Screen Size* = 46 *Limited to 30 lbs maximum ASSEMBLY INSTRUCTIONS LX HD Sit-Stand Desk Mount LCD Arm 14-30 lbs (6.35-13.61 kg) Maximum Screen Size* = 46 *Limited to 30 lbs maximum 0.78"-2.56" (20-65mm) 0.78-2.25 (20-57mm) 0.5"-2.5" (13-6) 180 360

More information

Pool Ladder. Owner s Manual For: 48in (122 cm) model. For illustrative purposes only. Pool is not provided. IMPORTANT! DO NOT RETURN PRODUCT TO STORE

Pool Ladder. Owner s Manual For: 48in (122 cm) model. For illustrative purposes only. Pool is not provided. IMPORTANT! DO NOT RETURN PRODUCT TO STORE OWNER S MNUL Pool Ladder Owner s Manual For: 48in (122 cm) model For illustrative purposes only. Pool is not provided. IMPORTNT SFETY RULES Read, understand, and follow all instructions carefully before

More information

INSTALLATION INSTRUCTIONS AND USER MANUAL FOR SLOAN EAF GOOSENECK SERIES FAUCETS

INSTALLATION INSTRUCTIONS AND USER MANUAL FOR SLOAN EAF GOOSENECK SERIES FAUCETS ode No: 0816409 Rev. 1 (07/11) INSTLLTION INSTRUTIONS ND USER MNUL FOR SLON EF GOOSENEK SERIES FUETS EF-700 Powered, Sensor ctivated Electronic Gooseneck Hand Washing Faucets EF-750 attery Powered, Sensor

More information

cm / inch FLOWMOTION G1 YEARS CONSTRUCTION MANUAL. Length Max weight Time to build. 37kg / 81 lbs 2,5 hour

cm / inch FLOWMOTION G1 YEARS CONSTRUCTION MANUAL. Length Max weight Time to build. 37kg / 81 lbs 2,5 hour 4-8 51 inch FLOWMOTION G1 YERS ONSTRUTION MNUL Length Max weight Time to build 106-130 cm / 42-51 inch 37kg / 81 lbs F 2,5 hour WRNING - IMPORTNT NOTIE TO PRENTS efore you start constructing and use our

More information

Lesson 8: Application Technology

Lesson 8: Application Technology The type of ppliction equipment used must suit the type of ppliction. In this module, you ll lern the prts of the most common types of ppliction equipment used by ssistnt pplictors, s well s how to properly

More information

WorkFit-T. User's Guide. Sit-Stand Desktop Workstation. Features & Specifications ENGLISH. Components. Tools Needed. A+B= lbs (

WorkFit-T. User's Guide. Sit-Stand Desktop Workstation. Features & Specifications ENGLISH. Components. Tools Needed. A+B= lbs ( User's Guide WorkFit-T Sit-Stand Desktop Workstation Features & Specifications 15 (381 mm) > 24 (61 cm) > 35 (89 cm) A B 10-35 lbs (4.5-15.88 kg) < 5 lbs (2.27 kg) < 18 (45.7 cm) 24.8 (63 cm) CAUTION:

More information

Owner s Man ual. For MTA1000 and MTA2000 Series Cycloidal Gear Air Winches

Owner s Man ual. For MTA1000 and MTA2000 Series Cycloidal Gear Air Winches Red this Own er s Mn u l thor ough ly e fore op er t ing the equip ment. Keep it with the equip ment t ll times. Re plce ments re vil le from Thern, Inc., PO Box 347, Winon, MN 55987, 507-454-2996. www.thern.com

More information

7.2 Assess Your Understanding

7.2 Assess Your Understanding 538 HPTER 7 pplitions of Trigonometri Funtions 7. ssess Your Understnding re You Prepred? nswers re given t the end of these exerises. If you get wrong nswer, red the pges listed in red. 1. The differene

More information

Hot-Air Blowers 12 / / Hot-Air Blowers

Hot-Air Blowers 12 / / Hot-Air Blowers Hot-Air Blowers MISTRAL HOTWIND PREMIUM / HOTWIND SYSTEM MISTRAL Accessories HOTWIND Accessories VULCAN SYSTEM VULCAN SYSTEM Accessories IGNITER BM4/BR4 IGNITER BM4/BR4 Accessories 12 / 13 14 / 15 16 17

More information

YEARS SKIBOCK CONSTRUCTION MANUAL cm / inch 90kg / 198 lbs 1.5 hours. Length Max weight Time to build

YEARS SKIBOCK CONSTRUCTION MANUAL cm / inch 90kg / 198 lbs 1.5 hours. Length Max weight Time to build SKIOCK CONSTRUCTION MNUL 8 YERS Length Max weight Time to build 130-190 cm / 51-75 inch 90kg / 198 lbs 1.5 hours WRNING - IMPORTNT NOTICE TO PRENTS efore you start constructing and use our product, please

More information

Apply the Pythagorean Theorem

Apply the Pythagorean Theorem 8. Apply the Pythgoren Theorem The Pythgoren theorem is nmed fter the Greek philosopher nd mthemtiin Pythgors (580500 B.C.E.). Although nient texts indite tht different iviliztions understood this property

More information

UTOPIA SERIES O W N E R S M A N U A L

UTOPIA SERIES O W N E R S M A N U A L UTOPIA SERIES 2 0 1 7 O W N E R S M A N U A L WELCOME Wtkins Mnufturing Corportion ongrtultes you on your deision to enjoy the finest sp ville. Welome to the growing fmily of Clder sp owners. OWNER S MANUAL

More information

2-5 YEARS BOOSTER CONSTRUCTION MANUAL cm / inch 20kg / 44 lbs 3 hours. Length Max weight Time to build

2-5 YEARS BOOSTER CONSTRUCTION MANUAL cm / inch 20kg / 44 lbs 3 hours. Length Max weight Time to build OOSTER G1 ONSTRUTION MNUL 2-5 YERS Length Max weight Time to build 90-112 cm / 35-44 inch 20kg / 44 lbs 3 hours WRNING - IMPORTNT NOTIE TO PRENTS efore you start constructing and use our product, please

More information

Lesson 2 PRACTICE PROBLEMS Using Trigonometry in Any Triangle

Lesson 2 PRACTICE PROBLEMS Using Trigonometry in Any Triangle Nme: Unit 6 Trigonometri Methods Lesson 2 PRTIE PROLEMS Using Trigonometry in ny Tringle I n utilize the Lw of Sines nd the Lw of osines to solve prolems involving indiret mesurement in non-right tringles.

More information

SNOWDRIFTER G1 CONSTRUCTION MANUAL

SNOWDRIFTER G1 CONSTRUCTION MANUAL ch 7-14 SNOWDRIFTER G1 CONSTRUCTION MNUL YERS Length Max weight Time to build 98-125 cm / 39-49 inch 80kg / 176 lbs 2 hours WRNING - IMPORTNT NOTICE TO PRENTS efore you start constructing and use our product,

More information

7-14 CONSTRUCTION MANUAL cm / inch. Length Max weight Time to build. 70 kg / 153 lbs 2,5 hours

7-14 CONSTRUCTION MANUAL cm / inch. Length Max weight Time to build. 70 kg / 153 lbs 2,5 hours 7-14 h DSH G1 YERS ONSTRUTION MNUL Length Max weight Time to build 126-170 cm / 50-67 inch 70 kg / 153 lbs 2,5 hours WRNING - IMPORTNT NOTIE TO PRENTS efore you start constructing and use our product,

More information

How To Demonstrate Guide E24 & E26

How To Demonstrate Guide E24 & E26 Pre-Demonstrtion Checklist Clen the entire mchine Chrge tteries Check squeegee ldes Bring proper rushes nd/or pds Clening cost nlysis Prepre quottion with lese pyments E24 & E26 literture nd fct sheet

More information

Owner s Manual For 4WM2 Series Worm Gear Hand Winch ORIGINAL TEXT

Owner s Manual For 4WM2 Series Worm Gear Hand Winch ORIGINAL TEXT Red this Owner s Mnul thoroughly efore operting the equipment. Keep it with the equipment t ll times. Replcements re ville from Thern, Inc., PO Box 347, Winon, MN 55987, 507-454-2996. www.thern.com IMPORTANT:

More information

The Discussion of this exercise covers the following points: The open-loop Ziegler-Nichols method. The open-loop Ziegler-Nichols method

The Discussion of this exercise covers the following points: The open-loop Ziegler-Nichols method. The open-loop Ziegler-Nichols method Exercise 6-3 Level Process Control EXERCISE OBJECTIVE In this exercise, you will perform PID control of level process. You will use the open-loop step response method to tune the controller. DISCUSSION

More information

2-4 YEARS RIDER CONSTRUCTION MANUAL cm 30 kg 90 min. Length Max weight Time to build

2-4 YEARS RIDER CONSTRUCTION MANUAL cm 30 kg 90 min. Length Max weight Time to build RIDER CONSTRUCTION MNUL 2-4 YERS Length Max weight Time to build 88-98 cm 30 kg 90 min WRNING - IMPORTNT NOTICE TO PRENTS efore you start constructing and use our product, please carefully read the following

More information

CAUTION - PUT SAFETY FIRST

CAUTION - PUT SAFETY FIRST www.shoremaster.com DVS Vertical Lift (Double V Side): Frame ssembly Instructions. Models: 500DVS - 0ft Wide, 5000lb Capacity - Part #: 0079 600DVS - 0ft Wide, 6000lb Capacity - Part #: 0033.. 3.. 5. CUTION

More information

cm / inch MONTHS WALLAROO G1 CONSTRUCTION MANUAL. Length Max weight Time to build. 12kg / 28 lbs 1,5 hours

cm / inch MONTHS WALLAROO G1 CONSTRUCTION MANUAL. Length Max weight Time to build. 12kg / 28 lbs 1,5 hours nch WLLROO G1 ONSTRUTION MNUL 8-24 MONTHS Length Max weight Time to build 98-125 cm / 39-49 inch 12kg / 28 lbs 1,5 hours WRNING - IMPORTNT NOTIE TO PRENTS efore you start constructing and use our product,

More information

Owner s Manual For M452 and M492 Series Spur Gear Hand Winches ORIGINAL TEXT

Owner s Manual For M452 and M492 Series Spur Gear Hand Winches ORIGINAL TEXT Red this Owner s Mnul thoroughly efore operting the equipment. Keep it with the equipment t ll times. Replcements re ville from Thern, Inc., PO Box 347, Winon, MN 55987, 507-454-2996. www.thern.com IMPORTANT:

More information

SGP-20S SGP-25S SGP-32S SGP-40S. Price $ $ $ $ Filtered compressed air, lubricated or non-lubricated

SGP-20S SGP-25S SGP-32S SGP-40S. Price $ $ $ $ Filtered compressed air, lubricated or non-lubricated SGP-S -JW SELF-ENTERING PRLLEL PNEUMTI GRIPPER (SERIES SGP-S) Double-ting. Ptented bklsh djusting system. High performne in ompt size. The rugged onstrution ensures trouble-free long life nd relibility

More information

Thank You. Warranty Message

Thank You. Warranty Message Thnk You Thnk you for purhsing MotorGuide Xi5 Wireless Trolling Motor. The Xi5 is designed nd engineered to deliver the performne tht nglers expet: quiet opertion, reliility, nd preise ontrol. We re onfident

More information

Owner s Manual. For TH330MR1 Hydraulic Winches Dedicated for Personnel Lifting

Owner s Manual. For TH330MR1 Hydraulic Winches Dedicated for Personnel Lifting Red this Owner s Mnul thoroughly before operting the equipment. Keep it with the equipment t ll times. Replcements re vilble from Thern, Inc., PO Box 347, Winon, MN 55987, 507-454-2996. www.thern.com IMPORTANT:

More information

Connectors according to DIN / IEC

Connectors according to DIN / IEC E L E C T R O N I C C O N N E C T O R S Connetors ording to DIN 41612 / IEC 60603-2 56 ept GmH I Tel. +49 (0) 88 61 / 25 01 0 I Fx +49 (0) 88 61 / 55 07 I E-Mil sles@ept.de I www.ept.de Contents Introdution

More information

Hybrid Relief Valves

Hybrid Relief Valves Hyrid Relief Vlves Crtridge Type Pge Diret Ating Relief, Before Chek 7 Diret Ating Relief, After Chek 7 Pilot Operted, Blned Piston, Ventle, Relief, Before Chek 7 T-8A Pilot Operted, Blned Piston, Ventle,

More information

ARIAKON OWNER S MANUAL READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS IN THIS MANUAL BEFORE USING THIS PAINTBALL MARKER.

ARIAKON OWNER S MANUAL READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS IN THIS MANUAL BEFORE USING THIS PAINTBALL MARKER. RIKON Thank You for choosing RIKON SIM-5 SERIES.68 CLIER PINTLL MRKER (SIM-5. SIM-5 PRO, SIM-5 PRO ELITE) RIKON 2794 LOKER VE WEST SUITE 107 CRLSD C 92010 1-877-4-RIKON 760-268-0735 FX 760-268-0736 On

More information

Right Triangle Trigonometry

Right Triangle Trigonometry ONDENSED LESSON 1.1 Right Tringle Trigonometr In this lesson ou will lern out the trigonometri rtios ssoited with right tringle use trigonometri rtios to find unknown side lengths in right tringle use

More information

Owner s Man ual. For 4HPF/4HWF/4HBP Series Helical/Parallel, Helical/Worm, Helical/Bevel and Planetary Gear Power Winches

Owner s Man ual. For 4HPF/4HWF/4HBP Series Helical/Parallel, Helical/Worm, Helical/Bevel and Planetary Gear Power Winches Red this Own er s Mn u l thor ough ly e fore op er t ing the equip ment. Keep it with the equip ment t ll times. Re plce ments re vil le from Thern, Inc., PO Box 347, Winon, MN 55987, 507-454-2996. www.thern.com

More information

CATERPILLAR XL G2 YEARS CONSTRUCTION MANUAL

CATERPILLAR XL G2 YEARS CONSTRUCTION MANUAL 6-14 CTERPILLR XL G2 YERS CONSTRUCTION MNUL Length Max weight Time to build 120-168 cm / 47-66 inch 70 kg / 153 lbs 2 hours WRNING - IMPORTNT NOTICE TO PRENTS efore you start constructing and use our product,

More information

BASKETBALL SPEED AND AGILITY

BASKETBALL SPEED AND AGILITY SKETLL SPEED ND GILITY Off court Speed and gility Work: ox gility Drills: cone set up 5 yards apart, read and follow description Drill 1 : (1-2-3-4) Sprint around cones, make hard cuts Drill 2: 1-2 Sprint,

More information

SAMPLE EVALUATION ONLY

SAMPLE EVALUATION ONLY mesurement nd geometry topic 15 Pythgors theorem 15.1 Overview Why lern this? Pythgors ws fmous mthemtiin who lived out 2500 yers go. He is redited with eing the fi rst person to prove tht in ny rightngled

More information

Our all-rounder stands out for its superb precision and durability. Central clamping of workpiece for conventional clamping and clamping of

Our all-rounder stands out for its superb precision and durability. Central clamping of workpiece for conventional clamping and clamping of 124 Allmti CENTRO GRIPP FOR CENTRAL GRIPPING Our ll-rounder stnds out for its super preision nd durility. Centrl lmping of workpiee for onventionl lmping nd lmping of unmined prts. Idel for 5-sided mining.

More information

Name Class Date SAMPLE. Complete the missing numbers in the sequences below. 753, ,982. The area of the shape is approximately cm 2

Name Class Date SAMPLE. Complete the missing numbers in the sequences below. 753, ,982. The area of the shape is approximately cm 2 End of term: TEST A You will need penil. Yer 5 Nme Clss Dte 1 2 Complete the missing numers in the sequenes elow. 200 3926 4926 400 500 700 7926 753,982 553,982 Estimte the re of the shpe elow. The re

More information

Firearm Safety. Links to Topics below XAVIER BECERRA THE SIX BASIC GUN SAFETY RULES. Attorney Genera] The. Six Basic Gun Safety Rules

Firearm Safety. Links to Topics below XAVIER BECERRA THE SIX BASIC GUN SAFETY RULES. Attorney Genera] The. Six Basic Gun Safety Rules firerm Sfety Stte of Cliforni - Deprtment of Justice - Office of the Attorney Generl Pge 1 of 14 Stte of Cliforni Deprtment of]ustice XAVIER BECERRA Attorney Gener] Serch Trnslte Website Trducir Sitio

More information

Apply the Law of Sines. You solved right triangles. You will solve triangles that have no right angle.

Apply the Law of Sines. You solved right triangles. You will solve triangles that have no right angle. 13.5 pply te Lw of Sines TEKS.1,.4, 2.4.; P.3.E efore Now You solved rigt tringles. You will solve tringles tt ve no rigt ngle. Wy? So you n find te distne etween frwy ojets, s in Ex. 44. Key Voulry lw

More information

In any right-angle triangle the side opposite to the right angle is called the Label the Hypotenuse in each diagram above.

In any right-angle triangle the side opposite to the right angle is called the Label the Hypotenuse in each diagram above. 9 Ademi Mth Dte: Pythgoren Theorem RIGHT ANGLE TRIANGLE - A right tringle is tringle with one 90 0 ngle. For exmple: In ny right-ngle tringle the side opposite to the right ngle is lled the Lbel the Hypotenuse

More information

Plant Growth Regulators in Spring Wheat. Anne Kirk, Craig Linde, and Pam de Rocquigny. Manitoba Agriculture

Plant Growth Regulators in Spring Wheat. Anne Kirk, Craig Linde, and Pam de Rocquigny. Manitoba Agriculture Plnt Growth Regultors in Spring Whet Anne Kirk, Crig Linde, nd Pm de Roquigny Mnito Agriulture Lodging is mjor rop prodution issue, espeilly in high yielding environments. Yield losses n rnge from 5 to

More information

DM-SL (English) Dealer's Manual. REVOSHIFT Shifter SL-RS47 SL-RS45 SL-RS36 SL-RS35 SL-RS34 SL-RS25

DM-SL (English) Dealer's Manual. REVOSHIFT Shifter SL-RS47 SL-RS45 SL-RS36 SL-RS35 SL-RS34 SL-RS25 (English) DM-SL0002-03 Dealer's Manual REVOSHIFT Shifter SL-RS47 SL-RS45 SL-RS36 SL-RS35 SL-RS34 SL-RS25 IMPORTNT NOTICE This dealer's manual is intended primarily for use by professional bicycle mechanics.

More information

Pool Ladder. Owner s Manual For: 52in (132 cm) model. For illustrative purposes only. Pool is not provided.

Pool Ladder. Owner s Manual For: 52in (132 cm) model. For illustrative purposes only. Pool is not provided. () 52 2-SECTIONS POOL LDDER ENGLISH 7.5 X 10.3 PNTONE 295U 0/17/201 OWNER S MNUL Pool Ladder Owner s Manual For: 52in (132 cm) model For illustrative purposes only. Pool is not provided. IMPORTNT SFETY

More information

! WARNING. Before using this product read and understand instructions.

! WARNING. Before using this product read and understand instructions. INSTRUCTION MNUL MM-702F Series 14-B Ball Type Blow own Valve ESY OPEN NLE! pplications: For Series 47, 67, and 70 boiler control blow down valve replacement. Series 14-B! WRNING Before using this product

More information

Reel Away (cord reeler)

Reel Away (cord reeler) Reel way (For ftermarket pplications) Reel way Installation and Owner s Manual (For ftermarket pplications) Features The Standard Reel way stores cords up to 36 feet in length. The Deluxe Reel way stores

More information

! WARNING. Before using this product read and understand instructions.

! WARNING. Before using this product read and understand instructions. Installation & Maintenance Instructions MM-702() Series 14-B Ball Type Blow own Valve ESY OPEN NLE! pplications: For Series 47, 67, and 70 boiler control blow down valve replacement. Series 14-B! WRNING

More information

Vertical Lift: Frame Assembly Instructions. Model: ft Wide 7000lb Capacity - Part #:

Vertical Lift: Frame Assembly Instructions. Model: ft Wide 7000lb Capacity - Part #: www.shoremaster.com 70068 Vertical Lift: Frame ssembly Instructions. Model: 70068-0ft Wide 7000lb apacity - Part #: 0070. 2. 3.. 5. UTION - PUT SFETY FIRST Before attempting to install or operate this

More information

SUMMER ASSIGNMENT FOR FUNCTIONS/TRIGONOMETRY Bring to school the 1 st day of class!

SUMMER ASSIGNMENT FOR FUNCTIONS/TRIGONOMETRY Bring to school the 1 st day of class! SUMMER ASSIGNMENT FOR FUNCTIONS/TRIGONOMETRY Bring to school the st d of clss! This summer ssignment is designed to prepre ou for Functions/Trigonometr. Nothing on the summer ssignment is new. Everthing

More information

INVESTIGATION 2. What s the Angle?

INVESTIGATION 2. What s the Angle? INVESTIGATION 2 Wht s the Angle? In the previous investigtion, you lerned tht when the rigidity property of tringles is comined with the ility to djust the length of side, the opportunities for useful

More information

SUMMER ASSIGNMENT FOR FUNCTIONS/TRIGONOMETRY Due September 7 th

SUMMER ASSIGNMENT FOR FUNCTIONS/TRIGONOMETRY Due September 7 th SUMMER ASSIGNMENT FOR FUNCTIONS/TRIGONOMETRY Due Septemer 7 th This summer ssignment is designed to prepre ou for Functions/Trigonometr. Nothing on the summer ssignment is new. Everthing is review of topics

More information

USER INSTRUCTION MANUAL CONCRETE DETENT ANCHORAGE CONNECTOR

USER INSTRUCTION MANUAL CONCRETE DETENT ANCHORAGE CONNECTOR The Ultimate in Fall Protection Instructions for the following series products: oncrete Detent age onnector Model Numbers: 2101000, 2101002, 2101004, 2101000, 2101002, 2101004, 2100152 USER INSTRUTION

More information

Cooling System. Table of Contents. Section 6A - All Models. All Models

Cooling System. Table of Contents. Section 6A - All Models. All Models Cooling System All Models Tle of Contents Setion 6A - All Models Flow Speifitions...6A-3 Sewter Inlet Speifitions...6A-4 Generl Informtion...6A-4 Sewter Pump Identifition...6A-4 Sewter Inlet Hose...6A-5

More information

THERMOFLO FLUID PUMPS& SYSTEMS THERMOFLO FOR HEATING, COOLING AND WATER SUPPLY APPLICATIONS TO BS7074 SEALED SYSTEMS EXPANSION VESSELS PRESSURIZERS

THERMOFLO FLUID PUMPS& SYSTEMS THERMOFLO FOR HEATING, COOLING AND WATER SUPPLY APPLICATIONS TO BS7074 SEALED SYSTEMS EXPANSION VESSELS PRESSURIZERS THERMOFLO S E A L E D S Y S T E M S THERMOFLO SEALED SYSTEMS FOR HEATING, COOLING AND WATER SUPPLY APPLICATIONS TO BS7074 EXPANSION VESSELS PRESSURIZERS PUMPS& SYSTEMS WALL OR BASE MOUNTING PRESSURIZERS

More information

Dual Monitor Desk Mount

Dual Monitor Desk Mount Dul Mnitr Desk Munt Instructin Mnul SKU: STAND-V002 Scn the QR cde with yur mbile device r llw the link r helpul vides nd speciictins relted t this prduct. https://viv-us.cm/prducts/stnd-v002 help@viv-us.cm

More information

Bypass Compensator Cartridge, Size 16

Bypass Compensator Cartridge, Size 16 Bypss Compenstor Crtridge, Size 6 Q mx = 5 l/min, p mx = 42 br Direct cting, djustble compenstor spring Description These direct-cting bypss pressure-compenstor (hydrostt) crtridges, series DWDP-2B -6,

More information

Pinpoint GPS. FCC and IC Compliance Statement

Pinpoint GPS. FCC and IC Compliance Statement FCC nd IC Complince Sttement PINPOINT KEY FOB, FCC ID MVU10148 ACMA: N2523 IC: 6094A 09291, 6094A 09305 This device complies with prt 15 of the FCC Rules. Opertion is suject to the following two conditions:

More information

Standard Products BRACKETS CONNECTORS ELBOWS FLANGES SPHERES / HEMISPHERES / POST & END CAPS SLIP-ON FITTINGS BIKE RACKS MISCELLANEOUS PRODUCTS

Standard Products BRACKETS CONNECTORS ELBOWS FLANGES SPHERES / HEMISPHERES / POST & END CAPS SLIP-ON FITTINGS BIKE RACKS MISCELLANEOUS PRODUCTS Stndrd Produts BRACKETS CONNECTORS ELBOWS FLANGES SPHERES / HEMISPHERES / POST & END CAPS SLIP-ON FITTINGS BIKE RACKS MISCELLANEOUS PRODUCTS Formed Wll Mount Brkets Formed Wll Mount Brket Aville in Steel,

More information

1'-0" [0.305 m] WALL TYPICAL U.N.O. OPP. HAND C S3.3 S3.3 TW 99'-8 OPP. HAND TW 99'-8 TF 95'-6 B S3.2

1'-0 [0.305 m] WALL TYPICAL U.N.O. OPP. HAND C S3.3 S3.3 TW 99'-8 OPP. HAND TW 99'-8 TF 95'-6 B S3.2 FOUNDTION PLN NOTES 1. T.W. INDITES TOP OF ON. WLL ELEV.. T.F. INDITES TOP OF ON. FOOTING ELEV.. T.L. TOP OF LEDGE 4. INDITES FOOTING STEP 5. INDITES TOP OF ONRETE WLL STEP HND '-6" [0.76 m] FTG. TYPIL

More information

SETUP & PREPARATION KNOW YOUR PRODUCT 1. ASSEMBLY CORDLESS POLE PRUNER. Fitting Rear Handle

SETUP & PREPARATION KNOW YOUR PRODUCT 1. ASSEMBLY CORDLESS POLE PRUNER. Fitting Rear Handle STANDARD EQUIPMENT Pole Chin Guide Br CORDLESS POLE PRUNER Guide Br Cover INSTRUCTION MANUAL Rer Hndle SPECIFICATIONS Input: Br Length: Cutting Length Mx.: Chin Speed: Oil Tnk Cpcity: Length: Weight: 18V

More information

United States Patent (19)

United States Patent (19) United Sttes Ptent (19) Mobley (11) 45) Ptent Number: Dte of Ptent: Nov. 19, 1991 (54) BICYCLE RACK FORMOUNTING ON A VAN 76 Inventor: Mrk H. Mobley, P.O. Box 636, Norris, Tenn. 37828 21 Appl. No.: 436,492

More information

ERRATA for Guide for the Development of Bicycle Facilities, 4th Edition (GBF-4)

ERRATA for Guide for the Development of Bicycle Facilities, 4th Edition (GBF-4) Dvid Bernhrdt, P.E., President Commissioner, Mine Deprtment of Trnsporttion Bud Wright, Executive Director 444 North Cpitol Street NW, Suite 249, Wshington, DC 20001 (202) 624-5800 Fx: (202) 624-5806 www.trnsporttion.org

More information

Efficacy of Selected Insecticides Against Phormium Mealybugs on New. Zealand Flax, Phormium tenax.

Efficacy of Selected Insecticides Against Phormium Mealybugs on New. Zealand Flax, Phormium tenax. 1 Effiy of Seleted Insetiides Aginst Phormium Melyugs on New Zelnd Flx, Phormium tenx. Phormium tenx v. Dzler Jmes A. Bethke Pest Teh West 34920 Ornge St. Wildomr, CA. 92595 (951)-775-7172 ethkeugmn@erthlink.net

More information

Instructions. Electronic Aquarium Water Change System. Replenishing Water. Extracting Water. Includes instructions for:

Instructions. Electronic Aquarium Water Change System. Replenishing Water. Extracting Water. Includes instructions for: Instructions Electronic Aqurium Wter Chnge System Includes instructions for: Replenishing Wter Extrcting Wter INTRODUCTION WHAT S INCLUDED The Aquplenish Wter Chnger conditions, monitors nd replenishes

More information

Instruction Manual. The Blackhawk XC. Model FP015

Instruction Manual. The Blackhawk XC. Model FP015 Instruction Manual The Blackhawk XC Model FP015 TTENTION!! WHEN YOU SEE WRNING! BE SURE TO HEED THE MESSGE! THE INFORMTION CONTINED IN THESE MESSGES CN SVE YOUR LIFE!! PLESE NOTE THT WRNING! statements

More information

Grade 6. Mathematics. Student Booklet SPRING 2011 RELEASED ASSESSMENT QUESTIONS. Record your answers on the Multiple-Choice Answer Sheet.

Grade 6. Mathematics. Student Booklet SPRING 2011 RELEASED ASSESSMENT QUESTIONS. Record your answers on the Multiple-Choice Answer Sheet. Grde 6 Assessment of Reding, Writing nd Mthemtics, Junior Division Student Booklet Mthemtics SPRING 211 RELEASED ASSESSMENT QUESTIONS Record your nswers on the Multiple-Choice Answer Sheet. Plese note:

More information

RULES OF HOCKEY

RULES OF HOCKEY RULES OF HOCKEY 2007-2008 Rules of Hokey inluding explntions Effetive from 1 Jnury 2007 for the yers 2007 nd 2008 Copyright FIH 2006 The Interntionl Hokey Federtion Rue du Vlentin 61 CH 1004 Lusnne Switzerlnd

More information

RULES OF INDOOR HOCKEY

RULES OF INDOOR HOCKEY RULES OF INDOOR HOCKEY 2007-2008 Rules of Indoor Hokey inluding explntions Effetive from 1 Jnury 2007 for the yers 2007 nd 2008 Copyright FIH 2006 The Interntionl Hokey Federtion Rue du Vlentin 61 CH

More information

X5-55/X5-70/X5-80/X Operation Maintenance Installation Warranty Manual

X5-55/X5-70/X5-80/X Operation Maintenance Installation Warranty Manual X5-55/X5-70/X5-80/X5-105 Opertion Mintennce Instlltion Wrrnty Mnul EU Complince Sttement Attwood Corportion hereby declres tht the MotorGuide X5 trolling motor is in complince with the essentil requirements

More information

OWNER S MANUAL GRIPS

OWNER S MANUAL GRIPS OWNER S MNUL GRIPS GRIPS OWNER S MNUL TLE OF ONTENTS EFORE OPERTING THIS TOOL, RE N UNERSTN LL OF THE Maxis Tools... INSTRUTIONS N SFETY INFORMTION IN THIS MNUL Warning Labels... Safety and Precautions...5

More information

T POOL ASSEMBLY AND INSTALLATION MANUAL. Trinidad LX Above Ground 52 Round Extruded Wall Pools

T POOL ASSEMBLY AND INSTALLATION MANUAL. Trinidad LX Above Ground 52 Round Extruded Wall Pools T3668-80 POOL SSEMLY ND INSTLLTION MNUL Trinidad LX bove Ground 52 Round Extruded Wall Pools Note: Deck and fence accessories shown are optional. THIS MNUL EXPLINS THE CORRECT METHOD TO SSEMLE YOUR NEW

More information

Contents TRIGONOMETRIC METHODS PROBABILITY DISTRIBUTIONS

Contents TRIGONOMETRIC METHODS PROBABILITY DISTRIBUTIONS ontents UNIT 7 TRIGONOMETRI METHODS Lesson 1 Trigonometric Functions................... 462 1 onnecting ngle Mesures nd Liner Mesures.............. 463 2 Mesuring Without Mesuring.........................

More information

Grand Espresso Corner Kitchen

Grand Espresso Corner Kitchen Please retain this information for future reference PRTS LIST To order replacement parts, please visit 1 2 3 4 6 5 7 8 9 10 11 12 13 19 22 16 17 18 20 23 24 25 14 15 21 26 28 30 31 32 33 29 34 36 37 27

More information

JOHNSTON COUNTY DEPARTMENT OF UTILITIES DUCHESS DOWNS FORCE MAIN IMPROVMENTS OCTOBER 2017

JOHNSTON COUNTY DEPARTMENT OF UTILITIES DUCHESS DOWNS FORCE MAIN IMPROVMENTS OCTOBER 2017 DEPRTMENT OF UTILITIES FORE MIN IMPROVMENTS OTOER 2017 Owner: Johnston ounty ORD OF OMMISSIRS Jeffrey P. arver - hairman Ted G. Godwin - Vice hairman ookie Pope llen L. Mims, Jr. had M. Stewart Keith ranch

More information

Geometry. Trigonometry of Right Triangles. Slide 2 / 240. Slide 1 / 240. Slide 4 / 240. Slide 3 / 240. Slide 6 / 240.

Geometry. Trigonometry of Right Triangles. Slide 2 / 240. Slide 1 / 240. Slide 4 / 240. Slide 3 / 240. Slide 6 / 240. Slide 1 / 240 New Jersey enter for Tehing nd Lerning Progressive Mthemtis Inititive This mteril is mde freely ville t www.njtl.org nd is intended for the non-ommeril use of students nd tehers. These mterils

More information

* SEE ANCHOR SCHEDULE SHEET 7

* SEE ANCHOR SCHEDULE SHEET 7 "-20 MLE PNELMTE W/ WINGNUT -1/2" O.C. "-20 X 1/2" MCHINE OLT & NUT -1/2" O.C 04/0/15 JH UPDTE TO 5TH EDITION (2014) FC 8/14/1 Y DTE SPCING ERROR OR MSONRY POWERS CLK-IN W/ "-20 SIDEWLK OLT -1/2" O.C.

More information

6 TRIGONOMETRY TASK 6.1 TASK 6.2. hypotenuse. opposite. adjacent. opposite. hypotenuse 34. adjacent. opposite. a f

6 TRIGONOMETRY TASK 6.1 TASK 6.2. hypotenuse. opposite. adjacent. opposite. hypotenuse 34. adjacent. opposite. a f 1 6 TIGONOMETY TK 6.1 In eh tringle elow, note the ngle given nd stte whether the identified side is in the orret position or not. 1. 4. opposite 41 2. djent 3. 58 63 djent 32 hypotenuse 5. 68 djent 6.

More information