K V A L I F I K. Our accreditation number: NAH /2015. Valid to:
|
|
- Alyson Patrick
- 5 years ago
- Views:
Transcription
1 KVALIFIK Ltd. has founded in In 1993 our calibration laboratory has get the accredited status and we have calibrated standards for the generally used physical parameters. Our standards are traceable to national and international standards. Our company can calibrate instruments in the laboratory or on the spot. Furthermore we can measure temperature and relative humidity uniformity of equipments and air-conditioned areas. We can validate and qualificate food industrial and pharmaceutical equipments, test cleanrooms, measure and repair air filters. We can also translate and vet technical texts and instruction manuals. Accreditation of our calibration laboratory is continuous since Our laboratory has accredited by Hungarian National Accreditation Authority (NAH) according to standard MSZ EN ISO/IEC 17025:2005. Our accreditation number: NAH /2015. Valid to: Our testing laboratory has get the accredited status in We perform temperature and relative humidity uniformity measurements. Our accreditation number: NAH /2018. Valid to: Our accredited calibration laboratory specialized for calibrating flowmeters is TECHNICOOP Ltd. (property of KVALIFIK Ltd.) Our accreditation number: NAH /2018. Valid to: Issued calibration certificates fulfil requirements of standard ISO 9000, HACCP, IATF 16949, GMP, GLP, ISO 14001, ISO Term of calibration: 5 workdays with low prices! Accredited calibration laboratory (Our accreditation number: NAH /2015) - Thermometer calibration On-site and laboratory calibration of thermometers, air termometers, temperature transmitters and infrared thermometers. Thermometers: ( ) C Infrared thermometers: ( ) C 1/7
2 - Calibration of temperature display Temperature display calibration of furnaces, dry-heat chambers, drying chambers, incubators, refrigerators, freezers etc. ( ) C - Pressure gauge calibration in range On-site and laboratory calibration of absolute and overpressure gauges, vacuum meters, transmitters and pressure calibrators. abs. 3 µbar bar overpessure (-1...0) bar vacuum - Relative humidity meter, dew point meter and transmitter calibration on-site and in the laboratory. relative humidity: (2...99) rh% dew point: ( ) C - Length meter and sieve calibration on-site and in the laboratory Calibration ranges: Vernier calipers: ( ) mm Depth and height meters, micrometers: ( ) mm Measuring tapes, rulers (only in the laboratory): (0...50) m Indicators, inner dimension meters, built-in micrometers: (0...50) mm Sieves: 20 µm mm Thickness meters: ( ) mm Coating thickness meters: (0...3) mm Feeler gauges, thickness standards: ( ) mm High precision thickness standards (only in the labor) ( ) mm Individual length values: ( ) mm - Watch, stopwatch and timer calibration on-site and in the laboratory 2/7
3 - Electric meter calibration on-site and in the laboratory Multimeters, 0.01 ma...20 A DC-AC 50 Hz digital oscilloscopes: 0.01 mv...1 kv DC-AC 50 Hz 2 mω GΩ, 10 Hz...1 GHz Insulation meters: 2 mω GΩ Flashback testers: 1 mv...10 kv Current clamps: 1 A...1 ka, DC ( ) A, AC 50 Hz Resistance standards: 100 µω...1 TΩ Conductivity meters: 100 ns/cm S/cm Voltage sources: 1 mv...10 kv DC-AC 50 Hz Current sources: 20 µa A DC 20 µa A AC 50 Hz Capacitance meters and decades: 1 nf µf Inductivity meters and decades: 10 µh...10 H - Optical tachometer calibration on-site and in the laboratory ( ) min -1 - Revolution-controller calibration on-site and in the laboratory ( ) min -1 - Anemometer, anemometer transmitter calibration on-site and in the laboratory ( ) m/s - Torque wrench, screwdriver and limitor, torque meter calibration onsite and in the laboratory. Torque wrenches, screwdrivers and limitors: Torque meters: ( ) Nm ( ) Nm - Balance calibration on-site and in the laboratory. 1 mg 710 kg 3/7
4 - Force meter calibration on-site and in the laboratory. 2 N 60 kn - Pipette, burette, dispenser calibration in the laboratory. Maintenance, adjusting and repairing of pipettes and burettes. 10 µl 160 ml - Illuminance meter calibration on-site and in the laboratory. ( ) lx - Refractometer calibration on-site and in the laboratory. ( ) RI (0 91) Bx - ph-meter calibration on-site and in the laboratory. Calibration values: ph ph ph ph 5.00 ph ph ph ph Accredited calibration laboratory (Our accreditation number: NAH /2018) - Rotameter, nozzle and flowmeter (with gaseous agent) calibration on-site and in the laboratory. (0 2000) L/min 4/7
5 CALIBRATIONS TRACEABLE TO THE (INTER)NATIONAL STANDARDS Volume meters (e.g. retorts, measuring vessels) Hardness meters (Shore A and D) Weights with adjusting Bore meter, measuring gauges Viscosimeters Mechanical tachometers Air volume meters Low volume liquid flowmeters Sieve tension meters Gasproofing testers Wood moisture content meters Road testing equipments Accredited testing laboratory (Our accreditation number: NAH /2018) Temperature uniformity tests of heating chambers, climate chambers, thermostats, sterilizing chambers, ultra-freezers, freezers, refrigerators, cooling rooms, cooling trucks, air-conditioned rooms, storages, autoclaves, furnaces, heating furnaces, tunnel furnaces, water baths, tunnels, vessels, incubators using computerized datalogger system up to 290 sensors simultaneously. Relative humidity uniformity tests of climate chambers and airconditioned volumes using computerized datalogger system up to 100 sensors simultaneously. Producing reports with tables, colour charts, statistics and qualification of the equipment. TECHNICAL TRANSLATION Translation of ENGLISH and GERMAN instruction manuals, technical documents based on many years experience in pharmaceutical, packaging and food industry. 5/7
6 INDUSTRIAL SERVICES Testing and qualification of equipments Testing of pharmaceutical and laboratory equipments and road testing machines producing full documentation (IQ, OQ, PQ and SQ - control software validation) according to the customer's demand. E.g. qualification of pharmaceutical machines. Air status measurements (e. g. cleanrooms, hospital operational rooms) Testing and qualification (DQ, IQ, OQ, PQ) of HVACs, cleanrooms, hospital operational rooms, chemical chambers, weighing chambers as well as verifying of air filters. INSTRUMENT SELLING Industrial measuring systems Installing and calibrating on-site multi-channel temperature, relative humidity, pressure, differential pressure, air velocity etc. datalogger and registrator systems according to your demand either in wireless version or with SMS alarming. Installing systems for measuring corrected effective temperature. Temperature, relative humidity, pressure and differential pressure meters, stopwaches, multimeters, Vernier calipers, micrometers, dial indicators, measuring tapes, ph meters, conductivity meters, tachometers, air velocity meters with or without calibration. 6/7
7 OUR STABLE PARTNERS GUIDANCE...and more than 2000 companies. Our qualified specialists with many years experience are ready to helping you in case of all measuring, instrument selling and calibration question. KVALIFIK Ltd. Telefon: +36 (1) , +36 (1) , +36 (1) Fax: +36 (1) /7
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 FIRSTENERGY BETA LABORATORY 6670 Beta Drive Mayfield Village, OH 44143 William Coll Phone: 440 604 9889 CALIBRATION Valid To: November
More informationGMC-I Service GmbH Calibration Center
2016 GMC-I Service GmbH Calibration Center DAkkS, ISO & Factorycalibration www.gmci-service.com From spare parts, reparation, rental service, maintenance of industrial health and safety standards, calibration
More informationUKAS Accredited Electrical & Mechanical Calibration Services (Laboratory and On-site)
0720 UKAS Accredited Electrical & Mechanical Calibration Services (Laboratory and On-site) Aerospace/Defence Rail Automotive Packaging Pharmaceutical/Medical Catering Petrochemical/Oil & Gas Rhopoint Metrology
More informationMET-101 Introduction to Metrology
Pasig city Tel: 654-13-42 MET-101 Introduction to Metrology This 2-day course offers a basic introduction into Metrology, meant for people who are working in calibration and testing labs, maintenance services
More information2014 Programme of Training Courses in Measurement & Calibration
2014 Programme of Training Courses in Measurement & Calibration NSAI National Metrology Laboratory offers public courses to help individuals gain the skills that they require in the field of Measurement
More informationHUMOR 20. High Accuracy Humidity Calibrator. Water T, p1 HUMOR 20 V1.0
High Accuracy Humidity Calibrator The role of humidity calibrations that are accurate, reproducible, and documentable is becoming more and more important. ISO quality guidelines and regulations according
More informationHUMOR 20. High-precision Humidity Calibrator HUMOR 20. Operation
High-precision Humidity Calibrator The role of humidity calibrations that are accurate, reproducible, and documentable is becoming more and more important. ISO quality guidelines and regulations according
More informationindustrial services industrial services
Calibration in accredited laboratories 0981.4464/PC/neR/07.2008 32 33 Why calibrate? Contents Calibration and test equipment management play a major part in the quality of production and in avoiding waste
More informationCalibration certificates
Temperature Caibration certificate for temperature measuring chains consisting of a contact temperature sensor and an instrument (also individual sensors). The calibration of the sensors or sensor + measuring
More informationHUMOR 20 HUMOR 20. High-precision Humidity Calibrator. Water T, p1
High-precision Humidity Calibrator The role of humidity calibrations that are accurate, reproducible, and documentable is becoming more and more important. ISO quality guidelines and regulations according
More informationGeneral Accreditation Guidance. General Equipment - Calibration and Checks, General Equipment Table
General Accreditation Guidance General Equipment - and Checks, General Equipment Table January 2018 Copyright National Association of Testing Authorities, Australia 2013 This publication is protected by
More informationENVIRONMENTAL LABORATORY APPROVAL PROGRAM CERTIFICATION MANUAL
1 of 7 The quality assurance plan as presented in the Quality Manual should assure that constant and consistent test conditions are met and verified and should be tailored to the laboratory s activities.
More informationAccreditation programme for calibration laboratories NAR KL Edition 1
Accreditation programme for calibration laboratories NAR-01-02-KL Edition 1 Approved by: Csaba Bodroghelyi Deputy Director General Responsible for preparation: Consistency of content reviewed by: Legal
More informationAccredited Laboratory
Accredited Laboratory A2LA has accredited CAL-RITE CORPORATION Naperville, IL for technical competence in the field of Calibration This laboratory is accredited in accordance with the recognized International
More informationCalibration equipment
Calibration equipment 0 Why calibrate? Calibration and test equipment management are nowadays essential for the manufacturing quality and efficiency as they help to avoid rejects and rework. Therefore,
More informationCALIBRATION SERVICES HUMIDITY DEW POINT AIR VELOCITY MASS FLOW TEMPERATURE CO 2 PRESSURE. (+34)
CALIBRATION SERVICES HUMIDITY DEW POINT AIR VELOCITY MASS FLOW TEMPERATURE CO 2 PRESSURE (+34) 968 162 005 www.sensovant.com comercial@sensovant.com www.epluse.com CALIBRATION AT THE HIGHEST LEVEL The
More informationCalibration equipment
Calibration equipment Testo Industrial Services More assurance, better service www.testotis.com Why calibrate? Calibration and test equipment management are nowadays essential for the manufacturing quality
More informationHand-held pressure calibrator with integrated pump Model CPH6600
Calibration technology Hand-held pressure calibrator with integrated pump Model CPH6600 WIKA data sheet CT 16.01 Applications Calibration service companies and service industry Measurement and control
More information20. Technical Equipment. Archived. This section applies to all equipment used in forensic examinations, such as
Instruments and Equipment Introduction 5.5. Authorization to use technical equipment 5.5.3 Use of instruments and equipment Instruction and maintenance manuals 5.4. 5.5.3 Use of nonlaboratory equipment
More informationUnique mounting features for Thermal Mass Flow Meters. By Martin Raab in cooperation with CaTeC b.v.
Unique mounting features for Thermal Mass Flow Meters By Martin Raab in cooperation with CaTeC b.v. Development and production of sensors and transmitters for: humidity dew point CO2 O2 air velocity mass
More informationPressure is our Business
Pressure is our Business Count on gauges and calibrators that perform Wherever you work Reduce Measurement Error Protect against diminished accuracy from environmental conditions, accidental damage, and
More informationDigital Pressure Gauge Main features: Data Sheet: BIT02B.417.R6.EN COVER on request
Data Sheet: BIT02B.417.R6.EN www.ntt.dk Digital Pressure Gauge COVER on request Bit02B digital gauge series is proposed as the cheaper version of LabDMM but guarantees all the functional characteristics
More informationDraft. Equipment/Instrument
Heating Ventilation Air Conditioning (HVAC) Technical Platform Recommended specialist equipment including instruments for those working with Healthcare Ventilation Systems Those working with Healthcare
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORYACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Reynosa, Tamaulipas, México CP. 88650 (Hereinafter
More informationProgrammable Submersible Level Transmitters
Programmable Submersible Level Transmitters PTM/N/RS485 CUSTOMER BENEFITS High flexibility due to scalalbe pressure range Digital (RS485) and analogue (4-20mA) output signal in one sensor Available as
More informationPreliminary filter Precision measurement chamber Flow meter Instruction manual
Preliminary filter 0554 3311 Precision measurement chamber 0554 3312 Flow meter 0554 3313 Instruction manual en 2 Safety and the environment Safety and the environment About this document Please read this
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CORPORATE CONSULTING, SERVICE, & INSTRUMENTS, INC. University Park, 221 Beaver Street Akron, OH 44304 Michael Kent Warner Phone: 330 376 3600 CALIBRATION Valid
More informationPERFORMANCE TEST INSTRUCTIONS FOR BIOHIT PROLINE PIPETTORS
PERFORMANCE TEST INSTRUCTIONS FOR BIOHIT PROLINE PIPETTORS VER3150999 1 Content: 1.0 Introduction...2 2.0 Existing standards....3 3.0 Biohit gravimetric test process, flow chart 4 4.0 The Calibration Service.
More informationMANUFACTURING Administration: Assembly Line Packaging Fleet Maintenance
MANUFACTURING Administration: Cameras: AA, AAA, 303/357, ID1500, ID2400, CR2, DL123 Electric Stapler: AA, ID1500 Office Equipment: AA, AAA, C, D, 9V, ID1500, ID2400, ID1400, ID1300, ID1604 Pencil Sharpener:
More informationDM01. Please visit our website: Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05
DM0 Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing
More informationTransferpette. Testing Instructions (SOP) 1. Introduction. May 2009
Transferpette Testing Instructions (SOP) May 2009 1. Introduction The standards DIN EN ISO 8655 describe both the design and the testing of the piston operated pipette Transferpette. The following Testing
More informationIDL01. Battery Powered Precision Digital Gauge for Leak Testing. Stainless Steel Sensor. class 0.05
IDL0 Battery Powered Precision Digital Gauge for Leak Testing Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger
More informationAdditel 761 Automated Pressure Calibrators Selection Guide
/ Process Calibration Equipment Automated Calibrators Selection Guide Model Features Range Module 1 761-LLP 761-D 761-L 761-LA 761-M 761-MA 761-H 761-HA 761-BP -2.5 to 2.5 mbar (-1 to 1 inh 2 O) -0.95
More informationPerformance Overview calibration Laboratory EP Instruments Messtechnik und Kalibrierung GmbH
Performance Overview calibration Laboratory EP Instruments Messtechnik und Kalibrierung GmbH 1 D-K-15143-01-00 Services around the measurement technology in Germanys most accurate DAkkS laboratory*. Whether
More informationAdditel 761 Automated Pressure Calibrators Selection Guide
Automated Calibrators Selection Guide Model Features Range 761-LLP 761-D 761-L 761-LA 761-M 761-MA 761-H 761-HA 761-BP 0.05 to 8 bar.a -0.90 to 25 bar (1.2 to 115 psi.a) (-13 to 375 psi) 0.1 to 26 bar.a
More informationGeneral European OMCL Network (GEON) QUALITY MANAGEMENT DOCUMENT
General European OMCL Network (GEON) QUALITY MANAGEMENT DOCUMENT PA/PH/OMCL (09) 64 R5 QUALIFICATION OF EQUIPMENT ANNEX 6: QUALIFICATION OF PISTON PIPETTES Full document title and reference Document type
More informationPneumatic high-pressure controller Model CPC7000
Calibration technology Pneumatic high-pressure controller Model CPC7000 WIKA data sheet CT 27.63 Applications Healthcare and avionics industry Industry (laboratory, workshop and production) Transmitter
More informationSEMEM3-78 Testing and calibrating instrumentation and control equipment and circuits
Testing and calibrating instrumentation and control equipment and Overview This unit identifies the competences you need to carry out tests and calibration of instrumentation and control equipment and,
More informationASDX Series Silicon Pressure Sensors
ASDX Series Silicon Pressure Sensors DESCRIPTION The ASDX Series is a Silicon Pressure Sensor offering a ratiometric analog interface for reading pressure over the specified full scale pressure span and
More informationVaisala Pressure, RH & Temp. Transmitter. The instrument was operational upon receipt. The instrument was adjusted and calibrated.
Asset #: 123 Calibration - Certificate No: 2083.01 Customer: Condition: Action Taken: Sample Inc. 123 Sample Rd. Sample, MA 01234 The instrument was operational upon receipt. The instrument was adjusted
More informationDM01. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05
Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing Ø
More informationCO2 incubator with additional process controls
CB series 150 C2 incubators C2 incubator with additional process controls The BINDER CB series C2 incubator is the premium class among the C2 incubators. It is suitable for all sensitive incubation applications
More informationBenefits. Rev.III_032018_Oxybaby 6.0_engl subject to technical alterations
OXYBABY 6.0 for O 2 or O 2 /CO 2 Cordless hand held oxygen or combined oxygen and carbon dioxide analyser for checking modified atmospheres in food packs. The ideal instrument for portable, faster and
More informationRental Equipment Fleet
Rental Equipment Fleet Hydrostatic Testing Product Standard test gauges Digital pressure gauges Euro pre-charge kit Mechanical pressure recorder Mechanical dual range recorder Mechanical temperature recorder
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: 12100 West 6 th Avenue, Lakewood, CO 80225 (Hereinafter
More informationali-q TM Gravimetric Verification Procedure
ali-q TM Gravimetric Verification Procedure Introduction This document describes the recommended procedure for verifying performance of the ali-q aliquoting pipet controller using the industry standard-
More informationETd 04. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. Type: ETd 04. class 0.05
Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 100 mbar up to 0... 400 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing
More informationUKAS calibration laboratory 8809 Temperature, pressure and electrical signals calibration guide
ABB MEASUREMENT & ANALYTICS PRODUCT GUIDE PG/SMD140 EN REV. B UKAS calibration laboratory 8809 Temperature, pressure and electrical signals calibration guide Measurement made easy UKAS calibration laboratory
More informationNGN Series nitrogen generator
NGN Series 8-64 nitrogen generator Applications how it works RK series 5-40 F Blanketing of Chemicals and Pharmaceuticals Gas Assisted Injection Moulding (GAIM) Laser Cutting Food Heat Treament of Ferrous
More informationHYDRA-line. HYDRA-Gauges Ultra High Purity Pressure Gauge Model HG. Pressure Systems. Applications. Special features. Description
Pressure Systems HYDRA-Gauges Ultra High Purity Pressure Gauge Model HG WIKA Data Sheet SP 99.20 Applications Semiconductor industry UHP-liquid chemicals distribution Special features Patented double diaphragm
More informationThe right atmosphere for health. A system for medical gas supply
The right atmosphere for health A system for medical gas supply Medical gases - a central component of healthcare Gases such as oxygen, helium, nitrous oxide and carbon dioxide play an important role in
More informationRequirements and Methods for Calibration of Equipment in Clinical Laboratories. NK Chan (HKRCBTS) 24 August 2007
Requirements and Methods for Calibration of Equipment in Clinical Laboratories NK Chan (HKRCBTS) 24 August 2007 1 Contents Basic Requirements of Equipment Calibration Calibration of Electronic Balance
More informationAdditel 761 Automated Pressure Calibrators
Additel 761 Fully automated pressure calibrator with built-in pressure generator / controller to as high as 600 psi (40 bar) or as low as 0.01 Pa (0.00004 inh 2 O) accuracy Dual pressure modules Built-in
More informationKarandikar Laboratories Pvt. Ltd., Gat No. 142, Boisar Chilhar Road, At Betegaon, Boisar (E), Taluka Palghar, Maharashtra
Last Amended on - Page 1 of 41 1 SAFETY 1. Safety Testing IEC 61010:2010 Single Fault Conditions IEC 61010-1 Cls. 4.4 And Similar Visual checks Verification of electrical parameters given on label IEC
More informationdeltaflowc deltaflowc Venturi or Probe
deltaflowc Mass Flowmeter for Gases - Multivariable with ultra fast dp, p and T-sensors - Compact, accurate and user-friendly - Ideal for OEMs deltaflowc Venturi or Probe Precise mass flow metering deltaflowc
More informationProgrammable pressure and temperature transmitters PTM/RS485
Programmable pressure and temperature transmitters PTM/RS485 Version: 26.06.2014 Technical Specifications Pressure measuring range (bar) 0.1... 0.5 > 0.5 2 > 2 25 Overpressure 3 bar 3 x FS ( 3 bar) 3 x
More informationProgrammable pressure and temperature transmitters PTM/RS485
Programmable pressure and temperature transmitters PTM/RS485 Version: 03-28-2012 Technical Specifications Pressure measuring range (bar) 0.1... 0.5 > 0.5 2 > 2 25 Overpressure 3 bar 3 x FS ( 3 bar) 3 x
More informationPC10 Piezoresistive Silicon Pressure Sensor
PC10 Piezoresistive Silicon Pressure Sensor Features With constant current and constant voltage excitation options Imported highly reliable pressure die Wide temperature compensation Normalized output
More informationGAS ANALYSER OXYBABY 6.0 for O 2. or O 2 /CO 2
GAS ANALYSER OXYBABY 6.0 for or Cordless hand held oxygen or combined oxygen and carbon dioxide analyser for checking modified atmospheres in food packs. The ideal instrument for portable, faster and accurate
More informationABB MEASUREMENT & ANALYTICS DATA SHEET. WaterMaster FEW530 Electromagnetic water meter
ABB MEASUREMENT & ANALYTICS DATA SHEET WaterMaster FEW530 Electromagnetic water meter 2 WATE RMASTE R F E W 530 ELECT ROMAGNE TIC WATE R ME TE R DS/FE W530/FE T3 -E N RE V. A Measurement made easy Cost
More informationTechnical Procedure for General Laboratory Equipment
Technical Procedure for General Laboratory Equipment 1.0 Purpose - This procedure specifies the required elements for the use of general laboratory equipment. 2.0 Scope - This procedure applies to all
More informationMeasurement of Low GAS & Liquid Flows
Measurement of Low GAS & Liquid Flows The Measurement Measurement with a float in a tapered borosilicate glass tube. Series 2100 with a 100 mm flow tube Series 2150 with a 150 mm flow tube Series 2300
More informationVITLAB Volumetric instruments
VITLAB Volumetric instruments Standard Operating Procedure (SOP) VITLAB GmbH Linus-Pauling-Str.1 63762 Grossostheim Germany Telefon: +49 6026 97799-0 Fax: +49 6026 97799-30 E-mail: info@vitlab.com Internet:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z CALIBRATION
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 ROBB PRECISION TOOL SERVICES, INC. 2100 196th St SW, Suite 144 Lynnwood, WA 98036 Robert Robb Phone: 425 672
More informationMANUAL KPS Pressure Control Valve
TetraTec Instruments GmbH Gewerbestrasse 8 71144 Steinenbronn Deutschland E-Mail: info@tetratec.de Tel.: 07157/5387-0 Fax: 07157/5387-10 MANUAL Pressure Control Valve *** VERSION 1.0 *** Update: 17.11.2006
More informationTransferpette -8/-12
Transferpette -8/-12 Testing Instructions (SOP) May 2009 1. Introduction The standard DIN EN ISO 8655 describes both the design and the testing of the piston operated pipette Transferpette 8/ 12. The following
More informationElcometer ISO Groove Depth Checker. Operating Instructions
Elcometer 2060 English ISO Groove Depth Checker Operating Instructions English The Elcometer 2060 ISO Groove Depth Checker has been tested in accordance with EU regulations governing electro-magnetic compliance
More informationMULTICHANNEL. Labnet International, Inc.
Labnet International, Inc. A B A1 A2 C F D H E 4A 4B 4C 4D G CONTENTS 1 - INTRODUCTION 2 - VOLUME SETTING 3 - METHOD OF PIPETTING 4 - RECOMMENDATIONS - RECALIBRATION 6 - CLEANING AND STERYLIZATION 7 -
More informationFPG8601 Force Balanced Piston Gauge
FPG8601 Force Balanced Piston Gauge Reference Level Calibration System for very low pressure Pressure range: 0 to 15 kpa gauge, absolute and absolute differential Standard resolution: 0.010 Pa, high resolution
More informationMEGAS 2.0. Gas analysis with direct C-Level Calculation and Bus-Connection. Data sheet
Data sheet MEGAS 2.0 Gas analysis with direct C-Level Calculation and Bus-Connection Mesa Industrie-Elektronik GmbH Neckarstraße 19, D-45768 Marl info@mesa-gmbh.de +49 (0) 2365-97 45 1-0 +49 (0) 2365-97
More informationQi Litre Ultrasonic Cleaner
Qi-300 17Litre Ultrasonic Cleaner Ultrawave s Qi-Series are robust and reliable, delivering outstanding cleaning performance in a wide range of industries. From precision, pharmaceutical and medical device
More informationHatchery Tips from Jamesway s Technical Team. Essential Hatchery Tools by Phillip Perry
Hatchery Tips from Jamesway s Technical Team Essential Hatchery Tools by Phillip Perry HATCHERY TOOLS FOR A JAMESWAY HATCHERY by Phillip Perry, Consultant and Technical Advisor Phillip is a former hatchery
More informationbetter measurement Simply a question of SCHMIDT Flow Sensor SS The cost-effective alternative in pressurised systems up to 10 bars.
Simply a question of better measurement SCHMIDT Flow Sensor SS 20.261 The cost-effective alternative in pressurised systems up to 10 bars. Compressed air technology Industrial processes A cost analysis
More informationTitle: INSTRUMENT AND EQUIPMENT DOCUMENTATION AND RECORDS
Page 1 of 7 Sections Included in this Document and Document History 1. Purpose 2. Scope 3. Responsibilities 4. Background 5. References/(Deleted date) 6. Procedure 7. Definitions 8. Records 9. Supporting
More informationOXYBABY - MOBILE HAND HELD GAS ANALYSER
S Application: - Food Packing - Beverage Industry - Cutting & Welding - Hospital and Medical Centre - Laboratory - MOBILE HAND HELD GAS ANALYSER Made in Germany Product of 6.0 for O2 or O2/CO2 premium
More informationAdditel 761 Automated Pressure Calibrators
Automated Calibrators UPDATED Fully automated pressure calibrator with built-in pressure generator / controller to as high as 600 psi (40 bar) or as low as 0.01 Pa (0.00004 inh 2 O) accuracy Dual pressure
More informationTechnical Datasheet ZHA Series Gear Flow Meters Aluminum Version with ball bearing for lubricating media
www.kem-kueppers.com Technical Datasheet ZHA Series Gear Flow Meters Aluminum Version with ball bearing for lubricating media Certified zertifiziert according gemäß to DIN DIN EN EN ISO ISO 9001 9001 2
More informationISC40G(S) with external
ISC40G(S) with external temperature e sensor ISC40G(S) with external temperature sensor To get a more stable and faster reacting temperature reading, Insatech have designed a small solution with a termowell
More informationOperating instructions Safety Rope Emergency Stop Switches ZB0052 / ZB0053 ZB0072 / ZB0073
Operating instructions Safety Rope Emergency Stop Switches UK ZB0052 / ZB0053 ZB0072 / ZB0073 7390878 / 02 03 / 2011 Contents 1 Safety instructions...3 2 Installation / set-up...4 2.1 Applications...4
More informationdeltaflowc deltaflowc Gas Massflowmeter Venturi- and Probe Type
deltaflowc Mass Flowmeter for Gases - Multivariable with ultra fast dp-, p- and T-Sensors - Compact, accurate and user-friendly - Ideal for OEMs deltaflowc Gas Massflowmeter Venturi- and Probe Type Precise
More informationOPTIBAR P 1010 C Technical Datasheet
Technical Datasheet Pressure transmitter with recessed diaphragm for general applications Wide variety thanks to modular design Measuring ranges up to 250 bar / 3750 psi High overload and temperature stability
More informationCO2 incubator with additional process controls
CB series 53 C2 Incubators C2 incubator with additional process controls The BINDER CB series C2 incubator is the premium class among the C2 incubators. It is suitable for all sensitive incubation applications
More informationIntelligent SUNTEX DC-5310(RS) Dissolved Oxygen Transmitter
Intelligent SUNTEX DC-5310(RS) Dissolved Oxygen Transmitter Overview C % ppm 4~20mA Analog Output ppb Power Supply 100~240 VAC mg/l Dimensions 96 x 96 x 132mm RS-485 Digital Output (for DC-5310-RS only)
More informationParametrable / Programmable Pressure Transmitter
Parametrable / Programmable Pressure Transmitter PTM/RS485 CUSTOMER BENEFITS High flexibility due to scalalbe pressure range Digital (RS485) and analogue (4-20mA) output signal in one sensor Available
More informationEquipment Accuracy / Selection
Revision 5.0: Included the PPP program for clarification. Revision 6.0: Update references for CTL PDSH 251B to CTL DSH 251E" Added leakage current tolerances for values above 5KHz For Client Labs Purpose
More informationOperating Instructions METTLER TOLEDO Pipette Check Application for AX and MX/UMX Balances Version 1.xx
Operating Instructions METTLER TOLEDO Pipette Check Application for AX and MX/UMX Balances Version 1.xx Contents 1 Introducing the Pipette Check application... 3 2 important notes... 3 3 Selecting the
More information973-SF 6 Analyzer. Precise and Stable SF 6 Gas Analyzer REFLECTING YOUR STANDARDS
Precise and Stable SF 6 Gas Analyzer Simultaneous measurement of humidity, SF 6 purity and SO 2 concentration Integrated gas recovery system with automatic pump back Fully automated SF 6 gas testing Fundamental
More informationAdditel 761 Automated Pressure Calibrators
Automated Calibrators UPDATED Fully automated pressure calibrator with built-in pressure generator / controller to as high as 600 psi (40 bar) or as low as 0.01 Pa (0.00004 inh 2 O) accuracy Dual pressure
More informationNEW: CO2 incubator with sterilizable sensor
CB series - NEW 160 C2 Incubators NEW: C2 incubator with sterilizable sensor The new CB series offers optimal growth conditions for cell cultures. The ANTI.PLENUM concept, the 180 C sterilization routine
More informationOSAT Series. Intrinsically Safe Infrared Temperature Sensor Operator's Guide
OSAT Series Intrinsically Safe Infrared Temperature Sensor Operator's Guide Issue L Jan 2017 Introduction OSAT Series intrinsically safe non-contact infrared temperature sensors measure the temperature
More informationEnsuring pipette & weighing device performance: Verification & Calibration
Ensuring pipette & weighing device performance: Verification & Calibration Wan Melissa Diyana bt Wan Normazlan Central Research Laboratories, Faculty of Medicine terms What is preventive maintenance? Regularly
More informationH&D Fitzgerald Pressure Pyknometry System Mark 5
Setting the standard in density H&D Fitzgerald Pressure Pyknometry System Mark 5 Simple Portable Traceable Remember! Your density meter is only as good as its last calibration! A fundamental calibration
More informationdeltaflowc deltaflowc Venturi or Probe
deltaflowc Mass Flowmeter for Gases Multivariable with ultra fast dp, p and Tsensors Compact, accurate and userfriendly Ideal for OEMs deltaflowc Venturi or Probe Precise mass flow metering deltaflowc
More informationTESTING BENCHES for watermeters
TESTING BENCHES for watermeters +372 6 480 235 Haljas tee 25, 12012 TALLINN Fax +372 6 480 125 Testing benches are designed by Tepso Ltd. for using in calibration laboratories and also in watermeter production
More informationSPECIFICATIONS PARTICLE SENSOR KS-19F Higashimotomachi, Kokubunji, Tokyo , Japan
SPECIFICATIONS PARTICLE SENSOR KS-19F 3-20-41 Higashimotomachi, Kokubunji, Tokyo 185-8533, Japan No. 13012-3E 17-06 Printed in Japan Outline The KS-19F is a sensor which uses the light scattering method
More informationExpert Hydrostatic Level Transmitters
Expert Hydrostatic s General Features MJK Expert hydrostatic level transmitters are designed for level measurement by submerging the transmitter in open channels, drains and tanks. Expert hydrostatic level
More informationFLOW CALIBRATION RIG Mobile Calibration of In-line Flow Meters
FLOW CALIBRATION RIG Mobile Calibration of In-line Flow Meters People - Ideas - Solutions www.insatechpharma.com The rig runs very well and swiftly finds the various set points. It means we are able to
More informationX2 Metallized Polypropylene Film Capacitor JFV
FEATURES: Non-inductive, (UL940V-0) plastic case sealed with epoxy resin. Provides interference suppression with VDE, ENEC and UL approvals. SPECIFICATIONS: Operating Temperature -40 ~ +110 Voltage Rating
More informationAMS 6916 Board mount pressure sensor with ratiometric analog output
FEATURES Piezoresistive pressure sensor with amplified analog output Calibrated and temperature compensated Ratiometric voltage output, 0.5 4.5 V Digital signal conditioning, 12 bit output resolution Differential,
More informationAutomatic Isokinetic Sampler. ST5 Evo
Automatic Isokinetic Sampler ST5 Evo Automatic Isokinetic Sampler ST5 Evo Moreover, in case of pump failure, the CU can work with a spare Dado PU unit or with any pump capable to supply the needed flowrate,
More information