LABORATORY SAFETY. By EOHS. ILRI Nairobi, 7th August, 2016
|
|
|
- Oliver Pitts
- 5 years ago
- Views:
Transcription
1 LABORATORY SAFETY By EOHS ILRI Nairobi, 7th August, 2016
2 Why is laboratory safety important? TO PREVENT: adverse health effects from exposure to chemicals exposure to organisms, diseases, etc. in laboratories laboratory equipment hazards - if not maintained properly
3 Lab safety must be taught to : all employees, including service groups Students Contractors Visitors
4 Lab safety must be reviewed when; new employees new procedures a change in procedures new equipment
5 Areas to cover General procedures or rules Glassware (do s and don ts) Procedures for handling chemicals Personal protec[ve equipment Waste disposal Emergency response plans
6 General procedures or rules You should remember the following: ü No open- toed shoes ü No shorts unless a lab coat is used ü Restrain hair when working with hazardous materials ü Remove protec[ve clothing right outside the worksta[on ü Use the proper Personal Protec[ve Equipment for the job
7 General procedures or rules cont.. Personal habits play a large role in minimizing hazards. The following measures must be taken: ü Do not eat, drink, smoke, chew gum or apply cosme[cs, or remove/insert contact lenses while in the laboratory ü Do not store food or beverages in the lab or in chemical refrigerator ü Do not mouth pipeae ü Wash hands before leaving laboratory or aber handling contaminated material
8 General procedures or rules cont.. These safe prac[ces should be followed to ensure safe working condi[ons: ü Do not use chipped or cracked glassware ü Know emergency procedures ü Keep the laboratory neat and clean ü Use hazardous chemicals under a fume hood and biohazardous materials under a biosafety cabinet (BSC) ü Decontaminate as needed
9 1. Glassware safety The following guidelines should be checked every [me you deal with glassware 1. Inspect glassware before and aber each use. 2. Discard or repair any cracked, broken, or damaged glassware 3. When inser[ng glass tubing into rubber stoppers, corks, or tubing, follow these guidelines: Use adequate hand protec[on. Lubricate the tubing. Hold hands close together to minimize movement if the glass breaks. Never use laboratory glassware to serve food or drinks.
10 Disposing of broken glass Do not pick up broken glass with bare or unprotected hands. Use a brush and dust pan to clean up broken glass. Remove broken glass in sinks by using tongs for large pieces and coaon held by tongs for small pieces. Place all the recovered broken glass into the broken glass container.
11 2. Procedures for handling chemicals proper labeling, including wastes proper storage storage cabinets store compa[ble chemicals together rooms properly vented & correct temperature
12 Procedures for handling chemicals cont. Proper handling use label or MSDS never test by taste or odor acids poured into water never vice versa take precau[ons and use proper equipment when s[rring or hea[ng flammable liquids
13 3. Personal Protec[ve Equipment: aprons,lab coats gloves- latex,nitrile,neoprene goggles, face shields, safety glasses respirators- full, par[al, dust mask noise protec[on Knowing what to use and when to use it is the key to properly protec[ng yourself.
14 4. Waste management
15 5. Emergency plan The first step is: KNOW YOUR SURROUNDING. 1) The exits and emergency escape routes 2) The posi[oning of the fire ex[nguishers and the fire alarms 3) Emergency security numbers 4) The loca[on of first aid boxes and the first aiders
16 Each lab should have an emergency plan detailing the emergency response procedures for your lab.
17 Emergency plan cont.. When you first walk into a lab you should always take note of the loca[on of the: Safety Showers Safety Eye Washes Emergency Exits Fire Ex[nguishers Emergency Electrical cutoff Switch
18 be(er lives through livestock ilri.org This presenta[on is licensed for use under the Crea[ve Commons Aaribu[on 4.0 Interna[onal Licence.
Environmental Engineering Laboratory General Guidelines for Safety Practices
Environmental Engineering Laboratory General Guidelines for Safety Practices Safety is as simple as ABC Always Be Careful AN EXPERIMENT DONE WELL IS... AN EXPERIMENT DONE SAFELY. 1. Think Safety First.
UNH Department of Forensic Sciences
UNH Department of Forensic Sciences LABORATORY SAFETY RULES, PRACTICES AND AGREEMENT (Professors, Graduate Students, Research Assistants, Teaching Assistants, Students Working on Research Projects and
Lab: Safety Due: Lab # 0
Name: Lab Section: Lab: Safety Due: Lab # 0 Purpose Science is a hands-on laboratory class. You will be doing many laboratory activities which require the use of hazardous chemicals. Safety in the science
Wolfson Campus Natural Science Department. Biology Laboratory. Student Safety Contract
Wolfson Campus Natural Science Department Biology Laboratory Student Safety Contract July 2000 Wolfson Campus Student Safety Contract-Biology Laboratory Purpose The Biology laboratory is a hands-on learning
Student Information & Laboratory Safety Contract
Student Information & Laboratory Safety Contract Mrs. Mawhiney Student Information Last Name First Name Preferred Name Home Address (including ZIP) Home Phone student e-mail Parent/Guardian Name Relationship
Katy Independent School District Science Safety Rules
Katy Independent School District Science Safety Rules PURPOSE Science is a hands-on laboratory class. You will be doing many laboratory activities which may require the use of hazardous chemicals or potentially
University of New Haven DEPARTMENT OF CHEMISTRY and CHEMICAL ENGINEERING
University of New Haven DEPARTMENT OF CHEMISTRY and CHEMICAL ENGINEERING A. Instructions: Student: Read carefully the following laboratory rules, safety precaution, and regulations. Your laboratory conduct
High School Safety Acknowledgment Form
High School Safety Acknowledgment Form Note to science teachers and supervisors/administrators: Safety is the most important part of a science lesson. This includes monitoring student behavior and taking
CHEMISTRY FACULTY LABORATORY SAFETY CONTRACT CENTRAL CAMPUS
CHEMISTRY FACULTY LABORATORY SAFETY CONTRACT CENTRAL CAMPUS Potential hazards exist in all chemical laboratories and some can cause serious accidents. Fortunately, most accidents can be prevented if each
LABORATORY SAFETY. A general overview
LABORATORY SAFETY A general overview INTRODUCTION Environmental protection, Occupational Safety and Health are the Responsibility of all staff, students and collaborators working at ETH. OBJECTIVES General
LABORATORY SAFETY INSPECTION
LABORATORY SAFETY INSPECTION DATE: P.I./LAB MANAGER(S): PHONE(S): DEPARTMENT: BUILDING: ROOM(S) INSPECTED: INSPECTOR(S): TIME IN: TIME OUT: TOTAL TIME: LAB TYPE: DISCIPLINE: General Laboratory Safety S
General Safety Rules
General Safety Rules 1. The goggles provided by the university are to be properly worn at all times in the lab. 2. You are to be properly dressed in the lab. a. Close-toed shoes. b. At least a short sleeve
Safety Rules for the Science Lab
Science 10 Safety in the Science Lab Name: Date: Block: Safety Rules for the Science Lab DRESS CODE 1. To protect your eyes from possible injury, wear safety goggles whenever you are working with chemicals,
BIOSAFETY SELF AUDIT PRINCIPAL INVESTIGATOR/PERMIT HOLDER: CONTAINMENT LEVEL: 1 2 (Shaded) RISK GROUP: 1 2 AUDIT TO BE COMPLETED BY (DATE):
Page 1 of 5 BIOSAFETY PROGRAM BIOSAFETY SELF AUDIT PRINCIPAL INVESTIGATOR/PERMIT HOLDER: SELF AUDIT COMPLETED BY: LABORATORY ROOM NUMBER: CONTAINMENT LEVEL: 1 2 (Shaded) RISK GROUP: 1 2 DATE OF AUDIT:
UNIVERSITY OF HOUSTON-CLEAR LAKE ENVIRONMENTAL, HEALTH AND SAFETY DEPARTMENT
Effective Date February 7, 2018 Number L 01 Subject Laboratory Safety Policy Reference SORM RMTSA Vol.III Ch. 7.13, 7.16, 7.18 Special Instructions None Distribution Laboratory Faculty & Staff Reevaluation
Guide to Safety in the Science Classroom
ECC Health & Science Building Guide to Safety in the Science Classroom SC 1000 Laboratory Safety for Students East Central College 1964 Prairie Dell Road ~ Union, Missouri 63084 Phone: (636) 584-6500 ~
Welcome Back To School
Welcome Back To School Bellringer: (Think, Pair, Share) 1. What does science mean to you? 2. What does Biology mean to you? 3. What do you think you will be exploring this year in Biology? LAB SAFETY RULES
Basic Principles of Laboratory Safety and Waste management. Presenter : Sonam Bansal Head - Nestlé Quality Assurance Centre Moga Nestlé India Limited
Basic Principles of Laboratory Safety and Waste management Presenter : Sonam Bansal Head - Nestlé Quality Assurance Centre Moga Nestlé India Limited 1 Contents of Training Module Chapter Chapter Title
Eric Sheagley, Lab Supervisor Fall, 2015
CH 107, Intro to Chemistry Lab Portland State University Eric Sheagley, Lab Supervisor Fall, 2015 Description: CH 107 is the laboratory associated with the CH 104 Intro to Chemistry lecture. Concurrent
Safety & Class Contract
Safety & Class Contract Required of ALL High School Science Students I will:! Follow all instructions given by the teacher and/or in the lab handout.! Protect my eyes, face, hands, and body when involved
Chemistry Safety Packet
Chemistry Safety Packet Mr. Buchanan Chemistry TO THE STUDENT Chemistry is exciting! Each day in the laboratory you are given the opportunity to confront the unknown, and to understand it. Each experiment
SAFETY ORIENTATION. University of Evansville Department of Chemistry
SAFETY ORIENTATION University of Evansville Department of Chemistry Safety Topics 1. Personal Protection and Proper Attire 2. Personal Hygiene and Conduct 3. Proper Handling of Chemicals 4. Safety Equipment
An Inuit Yo-Yo Sandra J. Walton
6.17-1 SCIENCE EXPERIMENTS ON FILE Revised Edition An Inuit Yo-Yo Sandra J. Walton Topic Centripetal force Time 20 minutes! Safety Please click on the safety icon to view the safety precautions. Allow
Flinn Scientific's Student Safety Contract
Flinn Scientific's Student Safety Contract Purpose Science is a hands-on laboratory class. You will be doing many laboratory activities that require the use of hazardous chemicals. Safety in the science
Learning Goals of Scientific Process & Lab Safety
Learning Goals of Scientific Process & Lab Safety I will be able to: Describe the meaning of all safety symbols Understand class procedures during labs. Know where all safety equipment is located. Know
Biosafety Level 2 (BSL2) Laboratory Safety Inspection Checklist
Conducted By: Date of Inspection: Location: Safety and Risk Management Office Biosafety Level 2 (BSL2) Laboratory Safety Inspection Checklist Principal Investigator/Supervisor: General Lab Housekeeping
Lab Safety MRS. WEBSTER
Lab Safety MRS. WEBSTER Essential Question What is the importance of Lab Safety? Objectives Locate and use Lab safety equipment Know the basic rules of lab safety in the classroom/lab Identify lab symbols
RECOGNIZING LABORATORY SAFETY
INTRODUCTION: RECOGNIZING LABORATORY SAFETY An important part of your study of biology will be working in a laboratory. In the laboratory, you and your classmates will learn biology by actively conducting
Laboratory Safety Inspection Checklist
Conducted By: Date of Inspection: Location: Safety and Risk Management Office Laboratory Safety Inspection Checklist Principal Investigator/Supervisor: General Lab Housekeeping A M S NO NA Comments Laboratory
General Guidelines: 1. Conduct yourself in a responsible manner at all times in the Art Classroom.
ART STUDENT SAFETY CONTRACT Purpose: Art is a hand-on class. You will be doing many activities in this room that will require the use of chemicals, tools and machines. Safety in the Art Room is the number
Developing Safety Guidelines for Cryogenic Liquids.
Developing Safety Guidelines for Cryogenic Liquids. Purpose: Develop a reference document that can be used by a Principle Investigator or a designee to assist in the development of Safety Operating Procedures
Safety in the AP Biology Laboratory Lab
Safety in the AP Biology Laboratory Lab Purpose: The purpose of this laboratory experience is to identify hazards and to implement a plan to react and respond to a hazardous condition if it presents itself.
SCIENCE EXPERIMENTS ON FILE Revised Edition Tornado Model. Safety Please click on the safety icon to view safety precautions.
SCIENCE EXPERIMENTS ON FILE Revised Edition 2.16-1 Tornado Model Topic Wind Time 1 hour! Safety Please click on the safety icon to view safety precautions. Materials empty duplicator paper box knife or
Hudson City School District. Student Safety Contract
Hudson City School District Student Safety Contract Purpose To all Students The following rules and regulations are extremely important to your safety in many areas of the school environment. Your instructor
(2) Review the CHP at least annually and revise the document as necessary to reflect current regulatory practice.
Chapter 13 Chemical Hygiene Plan 13-1. General a. The Chemical Hygiene Plan (CHP) establishes the minimum regulatory requirements for safe use of hazardous chemicals in the laboratory. Chemical exposure
Laboratory Inspection Checklist
Date: Time: Inspector(s): Laboratory Information Department Principal Investigator (PI)/Laboratory Instructor PI telephone number PI e-mail address Building Laboratory room number(s) Backup Safety Contact
SCIENCE LABORATORY SAFETY INSTRUCTIONS & CONTRACT
8 February, 2018 SCIENCE LABORATORY SAFETY INSTRUCTIONS & CONTRACT Dear Parents / Guardians This letter is to inform you of the College s efforts to create and maintain a safe Science laboratory environment.
Laboratory Self Inspection Checklist LAB01
Laboratory Self Inspection Checklist LAB01 General Chemical/Biological Laboratories Location Assessor Date This core checklist is provided by the Health and Safety Department as a template, which provides
TEMPLE UNIVERSITY A Commonwealth University Environmental Health & Radiation Safety (EHRS)
Page 1 of 8 TEMPLE UNIVERSITY A Commonwealth University Environmental Health & Radiation Safety (EHRS) Standard Operating Procedure (SOP) Bromodeoxyuridine (BrdU) Principal Investigator: Room & Building
Laboratory. Safety Training. Revised January 8, 2013
Laboratory Safety Training Revised January 8, 2013 Introduction Safety is an important part of the Clinical Laboratory culture. Because our laboratory utilizes numerous chemicals, procedures, and operations,
Laboratory Personal Protective Equipment & Hazard Assessment Tool
Laboratory Personal Protective Equipment & Hazard Assessment Tool This form must be completed by the person in charge of the laboratory, with the guidance of the Chemical Hygiene Officer to conduct a laboratory
Salt Lowers the Freezing Point of Water
Salt Lowers the Freezing Point of Water Topic Sodium chloride (NaCl), salt, lowers the freezing point of water. Introduction Salt is added to ice in ice cream freezers because salt lowers the freezing
PERSONAL PROTECTIVE EQUIPMENT FOR CHEMICAL EXPOSURES
Page 1 of 5 1.0 PURPOSE: Use of an appropriate ensemble of personal protective equipment (PPE) creates a second line of defense against exposure to hazardous chemicals. Engineering controls, such as fume
Laboratory Safety Training. Environmental Health and Safety
Laboratory Safety Training Environmental Health and Safety Why You Need Lab Safety Training Hazardous materials and/or equipment. You need to understand the risks and how to mitigate them. OSU requires
Making a Barometer and Using It
SCIENCE EXPERIMENTS ON FILE Revised Edition 2.5-1 Making a Barometer and Using It Topic Air pressure Time Varies! Safety Please click on the safety icon to view safety precautions. Materials large (1-gal)
1. Substance Information
UNIVERSITY SAFETY ENVIRONMENTAL MANAGEMENT SYSTEM University Heights Newark, New Jersey 07102 March 2018 Version 1 New Jersey Institute of Technology Laboratory Standard Operating Procedure (For the Use
PERSONAL PROTECTIVE EQUIPMENT
PERSONAL PROTECTIVE EQUIPMENT DEPARTMENT OF RISK MANAGEMENT AND SAFETY CREATED DEC 2008 Table of Contents Personal Protective Equipment... 1 Arm and Hand Protection... 1 Body Protection... 2 Ear and Hearing
OFFICE OF STATE HUMAN RESOURCES
OFFICE OF STATE HUMAN RESOURCES NUMBER: PPE-1 TOTAL PAGES: 8 SUBJECT: Personal Protective Equipment Program Effective Date: Revision Date: Revision #: RELATED LEGISLATION: The purpose of this program is
Effective Date: 24-April-2017 Version: 6 Page: 1 of 8 TITLE: SAF-370, PERSONAL PROTECTIVE EQUIPMENT GUIDELINES. Table of Contents
24-April-2017 Version: 6 Page: 1 of 8 Table of Contents 1.0 Introduction... 2 1.1 Purpose... 2 1.2 Scope... 2 1.3 Definitions... 2 1.4 Responsibilities... 3 Environmental Health and Safety Office (EHSO),
RUN TIME: 50 MIN PL02 Page 1 of 7 POGIL LAB EXERCISE 02 What Makes the Lab a Safe and Effective Place to Do Chemistry?
RUN TIME: 50 MIN PL02 Page 1 of 7 POGIL LAB EXERCISE 02 What Makes the Lab a Safe and Effective Place to Do Chemistry? Each member should assume their roles at this time (Table 1). Table 1. Group Member
Standard Operating Procedure for Solvent use in EMAL
Standard Operating Procedure for Solvent use in EMAL Solvents used in EMAL. Acetone Ethanol Methanol 2-Propanol Lacomit Solvent (contains Xylene) Location(s): Small amounts of solvents are used in all
STANDARD OPERATING PROCEDURES (SOP) FOR REPRODUCTIVE HAZARDS
STANDARD OPERATING PROCEDURES (SOP) FOR REPRODUCTIVE HAZARDS INTRODUCTION: Standard operating procedures (SOP) are intended to provide you with general guidance on how to safely work with a specific class
Standard Operating Procedure (SOP)
INTRODUCTION This SOP applies to. FORMALDEHYDE exposure in Anatomy Lab will be monitored at the beginning of each semester dissections are performed. Environmental Health and Safety will perform monitoring
Behavior of the Simple Pendulum
6.27-1 SCIENCE EXPERIMENTS ON FILE Revised Edition Behavior of the Simple Pendulum Carl C. Duzen Topic The behavior of the simple pendulum Time 15 minutes for preparation, 40 minutes to completion! Safety
Biology Lab Safety Procedures and Information
Biology Lab Safety Procedures and Information Health and safety are paramount values in science classrooms, laboratories and field activities. You are expected to learn, understand and comply with ACC
NUS Safety & Health Guidelines Procedure No: OSHE/SOP/GL/08
Page: Page 1 of 5 Prepared By Approved By Review Date Swapan Kanti Biswas Dr Peck Thian Guan 1.0 OBJECTIVE The objective of this document is to provide guidance on the selection and use of (PPE). This
Safety in the Science Lab
Safety in the Science Lab 7.4B use preventative safety equipment, including chemical splash goggles, aprons, and gloves, and be prepared to use emergency safety equipment, including an eye/face wash, a
A. Preparation The laboratory exercises for each laboratory must be read before the laboratory period.
#1 - Objectives: Identify the locations of important safety information and equipment; Understand how to properly use safety equipment in the laboratory; Understand the importance of being prepared for
Use of Biosafety II cabinets
RISK ASSESSMENT FORM Use this form to assist you to complete risk assessments for hazardous activities and processes. Any serious or ongoing hazards should be reported via RiskWare to ensure that appropriate
1. Safety glasses are to be worn at all times in the laboratory except in the study area adjacent to the lab.
SAFETY RULES page 1 General Precautions 1. Safety glasses are to be worn at all times in the laboratory except in the study area adjacent to the lab. 2. No horseplay. This includes running, throwing of
Topic 1: Safety in the Organic Chemistry Laboratory
Written by Danielle M. Solano Department of Chemistry & Biochemistry California State University, Bakersfield Recommended Resources Video ~ Lab Techniques & Safety: Crash Course Chemistry #21 http://www.youtube.com/watch?v=vrwrmiehr3a
WHS Guidelines Working with Chemicals
WHS Guidelines Working with Chemicals 1. Scope These guidelines are applicable to all environments where are used. The purpose of this document is to detail minimum requirements for working with, to list
LABORATORY FUME HOOD SPECIFICATION AND MAINTENANCE PROGRAM
LABORATORY FUME HOOD SPECIFICATION AND MAINTENANCE PROGRAM Last Updated: Tuesday, January 31, 2006 1. INTRODUCTION AND SCOPE 2. RESPONSIBILITIES 3. USER GUIDELINES 4. SYSTEM DESIGN SPECIFICATIONS o The
Hazardous Materials Spill Response
Hazardous Materials Spill Response The University of Iowa Rev. 02/10 Department Lab/Room Number PI/Lab Coordinator After Hours Contact Number University Public Safety (Phone 911) Fire, Police, Ambulance
STANDARD OPERATING PROCEDURE (SOP): URETHANE
TEMPLE UNIVERSITY A Commonwealth University Environmental Health & Radiation Safety (EHRS) STANDARD OPERATING PROCEDURE (SOP): URETHANE LABORATORY/USER INFORMATION Principal Investigator (PI): Phone #
Laboratory Safety Manual Prepared by RAEIN-Africa & Partners. Under the Implementation of The National Biosafety Framework Project for Swaziland
Laboratory Safety Manual Prepared by RAEIN-Africa & Partners Under the Implementation of The National Biosafety Framework Project for Swaziland Contents Preamble/ Introduction... 2 Safety declaration...
Chapter 4: Implementing Effective Exposure Controls
Chapter 4: Implementing Effective Exposure Controls Implementing effective controls to protect workers from health hazards requires attention and dedication. For example, equipment needs to be purchased,
Laboratory Standard Operating Procedure: Cryogenic Liquids
I. THIS STANDARD OPERATING PROCEDURE (SOP) IS FOR A: Specific laboratory procedure or experiment Examples: synthesis of chemiluminescent esters, folate functionalization of polymeric micelles, etc. Generic
Instructions for completing the Unit Operations Lab safety inspections using the Safety Inspection Checklist
Instructions for completing the Unit Operations Lab safety inspections using the Safety Inspection Checklist This checklist includes four sections: General Lab Safety; Safety Equipment Checklist; CM4110
DENTAL SHOP SAFETY. James Kaznosky Environmental Health and Safety
DENTAL SHOP SAFETY James Kaznosky Environmental Health and Safety TRAINING OBJECTIVES Types of Machines at Dental School lab General Shop Hazards General Shop Safety Rules What to do in Case of Injury
Natural Reaction Boosters C. V. Krishnan
SCIENCE EXPERIMENTS ON FILE Revised Edition 5.50-1 Natural Reaction Boosters C. V. Krishnan Topic Catalysts Time preparation, 1 2 hour to completion, 1 hour for each of six trials, 1 2 hour for analysis!
1. The laboratory supervisor must enforce the institutional policies that control access to the laboratory.
APPENDIX E-3: Biosafety Level 3 (BSL-3) The following is taken from the Biosafety in Microbiological and Biomedical Laboratories (BMBL) 5 th Edition, February 2009 Centers for Disease Control and Prevention
Operations: HSE. Health and Industrial Hygiene. Laboratory Safe Work Practice
Operations: HSE Health and Industrial Hygiene Laboratory Safe Work Practice Page 2 of 8 AMENDMENT RECORD Amendment Date Revision Number Revision Number 08/11/2016 4 Authority: Health Manager Custodian:
How Fast Is Your Toy Car?
SCIENCE EXPERIMENTS ON FILE Revised Edition 6.15-1 How Fast Is Your Toy Car? Daniela Taylor Topic Motion, calculating speed Time 1 hour! Safety Please click on the safety icon to view the safety precautions.
CELL CULTURE TECHNOLOGY SQG 3242 ASEPTIC TECHNIQUE AND LAB DESIGN DR. SITI PAULIENA MOHD BOHARI
CELL CULTURE TECHNOLOGY SQG 3242 ASEPTIC TECHNIQUE AND LAB DESIGN DR. SITI PAULIENA MOHD BOHARI What are we trying to do? Maintain isolated cells or pieces of tissue in a sterile controlled environmentin
TFS Safety Manual. Laboratory and Research Safety
TFS Safety Manual Laboratory and Research Safety This safety manual covers laboratory and research activities that are conducted in either a laboratory or outdoor setting which involve Texas A&M Forest
Safety Rules and Regulations for Researchers in the Chemistry Research Laboratory Building
C. Eugene Bennett Department of Chemistry Eberly College of Arts and Sciences Safety Rules and Regulations for Researchers in the Chemistry Research Laboratory Building October 2012 I certify that I have
Standard Operating Procedure (SOP)
Microwave Digester #1 General Process Description Standard Operating Procedure (SOP) This instrument is used to digest small amounts of material for chemical analysis (ICP), by placing the sample in a
TA/GA Occupational Health and Safety
TA/GA Occupational Health and Safety Faculty of Engineering & Architecture Science (FEAS) Presented by: Eric Ambroise Lab Safety Officer Agenda Intro to Health & Safety Ryerson EH&S Policy Rights & Responsibilities
Hazardous Materials Spill Response
Hazardous Materials Spill Response The University of Iowa Rev. 01/2019 Department: Lab/Room Number: PI/Lab Coordinator: After-hours Contact Number: University Public Safety - 911 Fire, Police, Ambulance
Safety In the Science Lab
Lab Safety: Everyone Is Responsible! Safety In the Science Lab Rules and Symbols 7.4B use preventative safety equipment, including chemical splash goggles, aprons, and gloves, and be prepared to use emergency
Roy G. Biv Charles W. McLaughlin
SCIENCE EXPERIMENTS ON FILE Revised Edition 6.25-1 Roy G. Biv Charles W. McLaughlin Topic Relationship between wavelength and frequency of light Time 1 hour! Safety Please click on the safety icon to view
In case of emergency or accident: 1. Call the instructor immediately. Describe the nature of the accident or injury.
INTRODUCTION TO SAFETY These guidelines for student safety in the laboratory are excerpted from "Safety in Academic Chemistry Laboratories", published by the American Chemical Society, 1990. To the best
Space Dust. Part A: 1 hour Part B: 10 minutes on day 1, 20 minutes on each of several subsequent days
Space Dust Topic Investigating micrometeorites Introduction The media carry stories about meteorites coming toward the Earth, but the Earth is actually being constantly bombarded with dust and dirt otherwise
SOP Standard Operating Procedure. Etching All Materials
SOP Standard Operating Procedure Etching All Materials #1 General Process Description This Sop will describe how to safely etch different materials using different techniques. All work described in this
Part A: 20 minutes plus 30 minutes setting time Part B: day 1, 20 minutes; then 5 minutes each day for about 5 days
The Bugs On Our Skin Topic Study of the microorganisms found on skin Introduction We spend considerable time cleaning ourselves, but we cannot rid ourselves of all the microbes on our bodies. Forensic
Laboratory Safety Rules Holt High School (from )
[Jump to Biology Safety Contract] Laboratory Safety Rules Holt High School (from http://bama.ua.edu/~mtt001/labrules.htm ) 1. Students will work individually on some experiments, while other experiments
GSU at Perimeter College / Dunwoody Campus Physics, Astronomy & Geology Labs. Astronomy Lab Policies & Procedures
Astronomy Lab Welcome to the Astronomy Labs at the Dunwoody Campus. Please read and familiarize yourself with the following safety rules and lab procedures. If you fail to adhere to these, you may be asked
Environmental Health and Public Safety. Graduate Student Safety Training
Environmental Health and Public Safety Graduate Student Safety Training INCIDENT AT DUKE UNIVERSITY Wednesday April 15, 1998 7.51 a.m. EDT Firefighters reported t the Gross Chemical Building after the
Guidelines for Handling Dry Materials
Guidelines for Handling Dry Materials What is Today s Focus? Dry chemicals or materials that could pose a hazard due to physical and toxicological characteristics. Can be natural or manmade, but will focus
longitudinal wave Figure 1 amplitude transverse wave Figure 2
Wave Pulses Topic A coiled spring can help visualize and explain interference and reflection of a wave. Introduction There are two types of waves, longitudinal and transverse. In a longitudinal wave the
Environmental Health and Public Safety. Graduate Student Safety Training
Environmental Health and Public Safety Graduate Student Safety Training Why Do We Care About Safety? >30,000 students/faculty/staff >1,000 research laboratories Chemical, Radiological, Biological Lasers,
Laboratory Safety Plan
Laboratory Safety Plan Introduction A laboratory safety plan is a document that describes the general rules of conduct and other information useful in helping to prevent laboratory incidents and to appropriately
Yeo Soh Bee A/Prof Dan Yock Young 28/03/2016 Prepared by Approved By Issue Date
Page: 1 of 6 Yeo Soh Bee A/Prof Dan Yock Young 28//2016 Prepared by Approved By Issue Date 1. OBJECTIVE The purpose of this SOP is to outline the procedures of cleaning up chemical spills. It will provide
The primary purpose of laboratory fume hoods is to keep toxic or irritating vapors out of the general laboratory working area.
Introduction Welcome to the Biosafety Cabinets and Fume Hoods Training Course (OHS_BIO304). This training is required for anyone that will be conducting work and/or research that requires the use of a
COURSE TOPICS. Sharps Safety equipment and barriers Decontamination Spills Waste Hazardous & Bio type Disposal Wrap-up Quiz
COURSE TOPICS Introduction to the Laboratory Be aware of your surroundings The Lab Safety plan Good Lab Safety practices The MSDS and labeling Personal Protective Equipment Compressed gas safety Sharps
Density and Stress in Plastics Mary V. McCrary
SCIENCE EXPERIMENTS ON FILE Revised Edition 5.25-1 Density and Stress in Plastics Mary V. McCrary Topic Density and birefringence of plastics Time Part A: 30 to 45 minutes; Part B: 30 to 45 minutes! Safety
ORGANIC CHEMISTRY LABORATORY I CH 337
ORGANIC CHEMISTRY LABORATORY I CH 337 Summer 2016 PORTLAND STATE UNIVERSITY Department of Chemistry Dr. Alexander H. Sandtorv (sandtorv@pdx.edu) 1 Contents Lab schedule... 3 Course Grading... 4 Lab reports...
Use, storage and disposal of flammable liquids
Use this form to assist you to complete risk assessments for hazardous activities and processes. Any serious or ongoing hazards should be reported via RiskWare to ensure that appropriate corrective actions
Preparation of Nerve Agent Simulant Aerosol
Page 1 of 6 Preparation of Nerve Agent Simulant Aerosol Section 1: Overview Standard Operating Procedure Lab: 3724 Beckman Institute Department: Beckman Institute for Advanced Science and Technology PI: