CONSIDERED A HAZARDOUS SUBSTANCE ACCORDING TO OSHA 29 CFR

Transcription

1 Page 1 of 6 1. Identification Product Name : Acid Dye Ink Ac300 Red Product Code : AC300-R-BB Ink Ver. : 3 General Use : Ink jet printing ink Product Description : Acid Dye Ink SDS Number : W32RB Manufacture Company Name : Mimaki Engineering Co., Ltd Address : Otsu, Shigeno, Tomi-shi, Nagano Japan Telephone No. : Importer/Distributor Established in USA Company Name : MIMAKI USA. INC. Address : 150 Satellite Boulevard, suite A, Suwanee, Georgia 30024, U.S.A Telephone No. : Emergency Telephone No. : Hazards Identification Emergency Overview Potential Health Effects Inhalation Eye Contact Skin Contact Ingestion Carcinogens Potential Environmental Effects : Red liquid. Avoid contact with eyes or clothing. In the case of skin contact, wash with soap and water. Keep out of reach of children. : Intentional exposure to ink vapors may cause respiratory irritation. : Ink contact with eye may be mildly irritating. : Ink contact with skin may cause irritation, swelling, or redness. : May cause upset stomach. : No ingredients are listed by OSHA, IARC, or NTP as known or suspected carcinogens.

2 Page 2 of 6 3. Composition / Information On Ingredients No Chemical Name Wt% CAS No. Chemical Formula 1 Colorants 5-15 Trade Secret Trade Secret 2 Glycerols Trade Secret Trade Secret 3 Organic materials <3 Trade Secret Trade Secret 4 Propane-1,2-diol C3H8O2 5 Water balance H2O OSHA Hazardous Components (29 CFR ) : Not hazardous. 4. First Aid Measures Inhalation Eye Contact Skin Contact Ingestion Protection To First-Aiders : If difficulties occur after vapour/aerosol has been inhaled, remove to fresh air and seek medical attention. : Wash affected eyes for at least 15 minutes under running water with eyelids held open. : Wash thoroughly with soap and water. : Rinse mouth and then drink plenty of water. 5. Fire Fighting Measures Flammable Properties Extinguishing Media Fire Fighting Instructions : Not flammable. : water spray, dry extinguishing media, foam, carbon dioxide : Wear full fire-fighting turn-out gear (full bunker gear) and respiratory protection (self-contained breathing apparatus).

3 Page 3 of 6 6. Accidental Release Measures Personal Precautions Cleaning up Methods : Wear appropriate personal protective equipment. : Avoid release to the environment. Absorb spillage with an inert material, then place in a chemical waste container for later safe disposal. Earth may be shoveled to contain spillage and to avoid contamination of sewers and water cources. 7. Handling And Storage Handling Storage : Do not breathe (dust, vapor, mist, gas). Avoid contact with skin, eyes, or clothing. Wash thoroughly after handling. Destroy contaminated shoes in proper manner. : Keep container tightly closed and in a cool place. Protect from temperatures below: 0 degree C. Protect from temperatures above: 40 degree C. 8. Exposure Controls / Personal Protection Exposure Limit Values None Established Exposure Controls Occupational Exposure Controls Engineering Controls : It is better to place local exhaust equipment. Personal Protection Respiratory : Wear respiratory protection if ventilation is inadequate. Breathing Protection protection if breathable aerosols/dust are formed.

4 Page 4 of 6 Hand Protection : Chemical resistant protective gloves. Eye Protection : Tightly fitting safety goggles(chemical goggles). Skin Protection : To prevent ANY contact, wear impervious clothing such as gloves, apron, boots, or whole body suits made from neoprene, as appropriate. Environmental Exposure Controls 9. Physical And Chemical Properties Appearance - Physical state : liquid - Color : Red Odor : product specific ph : 7.0~10.0 Boiling Point / Boiling Range : Not available Melting Point / Melting Range Flash Point : Not applicable. Flammability(solid, gas) Specific Gravity : 1.0~1.1 Solubility Water solubility : complete Viscosity : 3.0~10.0mPa.s(20 degree C) 10. Stability And Reactivity Conditions To Avoid Stability : High and freezing temperatures. : Stable

5 Page 5 of 6 Materials To Avoid Hazardous Reactions/ Decomposition Products : No hazardous decomposition products if stored and handled as prescribed/indicated. 11. Toxicological Information Acute Toxicity Eye Irritation Skin Irritation Sensitization Mutagenicity : May cause eye irritation. : May cause skin irritation. 12. Ecological Information Ecotoxicity Persistence And Degradability Bioaccumulative Potential Other Adverse Effects : Not available 13. Disposal Considerations : Must be dumped or incinerated in accordance with local regulations. Dispose of in a licensed facility. Recommend crushing, puncturing or other means to prevent unauthorized use of used containers. Do not dump this product into sewers, on the ground or into any body of water.

6 Page 6 of Transport Information Not classified as a dangerous good under transport regulations. (USDOT / IMDG / IATA / ICAO) 15. Regulatory Information OSHA Status TSCA Status SARA TitleⅢ Section 311/312 (40 CFR 370) : Not hazardous. : released / listed : Not hazardous. 16. Other Information This information is furnished without warranty, express or implied, except that it is accurate to the best knowledge of Mimaki Engineering Corporation. It relates only to the specific material designated herein, and dose not relate to use in combination with any other material or process. Mimaki Engineering Corporation assumes no legal responsibility for use or reliance upon this information. Revision history Version Date Content Aug-12 First issue May-13 An ink version is changed Jul-13 An ink version is changed.