STRUCTURAL FILL, SONOTUBES, CONCRETE, GRAVEL, CLEAR SILICONE, ENGINEERED WOOD FIBRE (E.W.F.), GEO-TEXTILE, SOIL, PLANTS & MULCH ARE NOT SUPPLIED.

Transcription

1 SLIDE COMPOETS: ATURE'S ISTRUMETS I-PG TRIPLE RAIL HILL SLIDE. I PACKAGE ICLUDES:- HT. SLIDE FRAME: x 1 WITH PRE-ATTACHED SLIDE AD COLLAR WIG WALL POST: x 2 PRE-ASSEMBLED WIG WALL RAILIGS: x 2 76mm [3"] BROW CERAMIC COATED DECK SCREWS: x 16 PRE-ASSEMBLED ETRACE PLATFORM: x 1 13 x 152mm [ 1 2" x 6"] GALV. LAG BOLTS WITH WASHERS: x 2 51mm [2"] BROW CERAMIC COATED DECK SCREWS: x 20 DUROLAW MAT WITH STAKES & ZIPTIES: x 4 PRE-MITRED LOG BORDER: x 14.6 lin.m [48 lin.ft] 254mm [10"] S.D.W.S. FASTEER: x 5 DRILL BIT FOR FASTEERS: x 1 STRUCTURAL FILL, SOOTUBES, COCRETE, GRAVEL, CLEAR SILICOE, EGIEERED WOOD FIBRE (E.W.F.), GEO-TEXTILE, SOIL, PLATS & MULCH ARE OT SUPPLIED. ETRACE PLATFORM COLLAR POST OTCHED TO RECEIVE WIG WALL RAILS WIG WALL POST WIG WALL CARVED COLLAR MULCHED GARDE BED WITH SHRUBS DUROLAW CLEARACE ZOE SLIDE EGIEERED WOOD FIBRE PROTECTIVE SAFETY SURFACE OR APPROVED ALTERATE PRE-MITRED LOG BORDER - PLA - ISTRUMETS FOR YOUR PLAYGROUD 3' EASY ISTALL HILL SLIDE PRODUCT UMBER PAGE 8.5x11 DRAW CHECKED PHOE UMBER: I-PG OF 9.T.S. COPYRIGHT 2016 ATURE'S ISTRUMETS. DO OT SCALE DRAWIGS. OT FOR COMMERCIAL USE OR REPRIT WITHOUT EXPRESSED WRITTE PERMISSIO FROM ATURE'S ISTRUMETS.

2 SLIDE LAYOUT: 1. HEIGHT OF SLIDE TO BE FROM SLIDE EXIT TO SLIDE ETRACE. 2. POSITIO SLIDE SO THAT THE SLIDE EXIT IS I THE REQUIRED LOCATIO TO ALLOW FOR THE PROTECTIVE SAFETY SURFACIG TO FIT WITHI THE LAYOUT. 3. THE LOG BORDER AROUD THE SAFETY SURFACIG WILL ADD APPROX. 2400mm [95"] DIRECTLY OUT FROM THE EXIT OF THE SLIDE. HILL COSTRUCTIO: 1. UDER THE SLIDE FRAME A MATERIAL SUCH AS HIGH PERFORMACE BEDDIG (H.P.B.) SHOULD BE USED TO ACHIEVE 95% S.P.D.D. COMPACTIO WITHOUT EEDIG TO MECHAICALLY COMPACT THE MATERIAL. 2. AROUD THE BACK AD SIDES OF THE SLIDE A STRUCTURAL FILL SHOULD BE USED THAT CA ACHIEVE 98% S.P.D.D. LOG COLLAR POST PRE-ATTACHED TO SLIDE FRAME SIT DOW COLLAR PRE-ATTACHED TO COLLAR POSTS SLIDE ETRACE SLIDE FRAME PRE-ATTACHED TO SLIDE ETRACE PLATFORM 1200mm [48"] 2404mm [94 1 2"] 150mm [6"] COMPACTED GRAULAR BASE FILL 95% SPDD FILL FOR HILL 98% SPDD 75mm [3"] TYP. COMPACTED GRAULAR BASE COURSE 2421mm [95"] 3604mm [ "] - SIDE SECTIO: SLIDE FRAME - ISTRUMETS FOR YOUR PLAYGROUD 3' EASY ISTALL HILL SLIDE PRODUCT UMBER PAGE 8.5x11 DRAW CHECKED PHOE UMBER: I-PG OF 9.T.S. COPYRIGHT 2016 ATURE'S ISTRUMETS. DO OT SCALE DRAWIGS. OT FOR COMMERCIAL USE OR REPRIT WITHOUT EXPRESSED WRITTE PERMISSIO FROM ATURE'S ISTRUMETS.

3 SLIDE ISTALLATIO: SIT DOW COLLAR COLLAR POST SLIDE ETRACE WIG WALL 1. POSITIO SLIDE ACCORDIG TO THE LAYOUT PLA. 2. SLIDE TO SIT O 200mm [8"] DEPTH OF CRUSHED GRAVEL (OR 3 4" CLEAR GRAVEL) COMPACTED TO 98 % S.P.D.D DIMESIOS OF GRAULAR BASE COURSE TO BE AT LEAST 200 x 1100 x 2301 mm [8" x 43" x 90"]. 3. BACKFILL ISIDE THE SLIDE FRAME WITH H.P.B. OR OTHER MATERIAL THAT CA ACHIEVE 95 % S.P.D.D. 4. COTIUE BUILDIG HILL ACCORDIG TO GRADIG PLA. 5. THE SLOPE OF THE GRAVEL BASE ALOG THE SIDES OF THE SLIDE SHOULD REMAI mm [12" - 18"] BELOW THE SIDE EDGES OF THE SLIDE. GARDE SOIL STRUCTURAL FILL COMPACTED TO 98% S.P.D.D. UDISTURBED SOIL SLIDE FRAME 1100mm [43"] 200mm [8"] COMPACTED GRAULAR BASE COURSE WIG WALL POST FOOTIGS BELOW FROST LIE - REAR SECTIO: SLIDE FRAME - ISTRUMETS FOR YOUR PLAYGROUD 3' EASY ISTALL HILL SLIDE PRODUCT UMBER PAGE 8.5x11 DRAW CHECKED PHOE UMBER: I-PG OF 9.T.S. COPYRIGHT 2016 ATURE'S ISTRUMETS. DO OT SCALE DRAWIGS. OT FOR COMMERCIAL USE OR REPRIT WITHOUT EXPRESSED WRITTE PERMISSIO FROM ATURE'S ISTRUMETS.

4 PLATIG BEDS: 1. FILL PLATIG BEDS WITH AT LEAST 300mm [12"] DEPTH PREMIUM ORGAIC GARDE SOIL UP TO 100mm [4"] BELOW FIISHED GRADE. 2. GARDE SOIL SHOULD OVERLAP THE DUROLAW MAT AD BE EVE WITH THE EDGE OF THE SOD. 3. ALL SHRUBS ARE IDETICAL O EACH SIDE OF SLIDE. 4. THE SIZE OF SHRUB SYMBOLS SHOW O THE PLATIG PLA ARE IDICATIVE OF ROOT-BALL SIZE, OT DRIPLIE. 5. THE PLATIG DESIG FOR THE GARDE BEDS AROUD THE HILL-SLIDE ARE DELIBERATELY OVER-PLATED TO IFLUECE THE TRAFFIC-PATTER OF CHILDRE PLAYIG O THE SLIDE FROM THE FIRST DAY OF ISTALLATIO. 6. SHRUBS ARE OT TO BE PLATED ITO DUROLAW. 7. AFTER PLATIG, TOP GARDE BED WITH 100mm [4"] OF MULCH. RECOMMEDED PLAT LIST: THE FOLLOWIG SHRUBS ARE RECOMMEDATIOS OLY; SPECIFIC SPECIES SELECTIO IS DEPEDAT O LOCAL SITE CODITIOS. Acer rubrum / Multi-temmed Red Maple (OR SIMILAR) 2m HEIGHT, CLUMP FORM: x2 Amelanchier canadeni / Multi-temmed Serviceberry (OR SIMILAR) 2m HEIGHT, CLUMP FORM: x6 Rhu typhina / Staghorn Sumac (OR SIMILAR) 1 GAL. POT: x6 Salix caprea / Puy Willow (OR SIMILAR) 3 GAL. POT: x6 Thuja occidentali / White Cedar (OR SIMILAR) 2m HEIGHT: x4 - ELEVATIO: PLATIG - - PLA: PLATIG - ISTRUMETS FOR YOUR PLAYGROUD 3' EASY ISTALL HILL SLIDE PRODUCT UMBER PAGE 8.5x11 DRAW CHECKED PHOE UMBER: I-PG OF 9.T.S. COPYRIGHT 2016 ATURE'S ISTRUMETS. DO OT SCALE DRAWIGS. OT FOR COMMERCIAL USE OR REPRIT WITHOUT EXPRESSED WRITTE PERMISSIO FROM ATURE'S ISTRUMETS.

5 GRADIG: 1. WITHI mm [48" - 60"] FROM THE EDGE OF THE SLIDE, THE FIISHED GRADE OF THE HILL IS TO BE COTOURED TO MATCH THE SLOPE OF THE SLIDE. 2. OUTSIDE OF THE mm [48" - 60"] ZOE THE GRADE SHALL SMOOTHLY TRASITIO ITO THE SURROUDIG HILL. 3. THE COTOURS SHOW BELOW ARE A EXAMPLE OF THE SHAPE OF THE HILL O THE SIDES OF THE SLIDE. 4. I GEERAL, THE GRADE SHOULD BE GRADUAL AD WITH A OVERALL COCAVE SHAPE. EXAMPLE COTOURS MULCH DUROLAW - ELEVATIO: HILL GRADIG - ISTRUMETS FOR YOUR PLAYGROUD 3' EASY ISTALL HILL SLIDE PRODUCT UMBER PAGE 8.5x11 DRAW CHECKED PHOE UMBER: I-PG OF 9.T.S. COPYRIGHT 2016 ATURE'S ISTRUMETS. DO OT SCALE DRAWIGS. OT FOR COMMERCIAL USE OR REPRIT WITHOUT EXPRESSED WRITTE PERMISSIO FROM ATURE'S ISTRUMETS.

6 DUROLAW ISTALLATIO: 1. A STRIP OF DUROLAW AT LEAST 525mm [21"] WIDE IS TO BE ISTALLED ALOG EACH SIDE OF THE SLIDE. 2. DUROLAW IS A RUBBER MAT GRASS PROTECTIO SYSTEM, IMPACT RATED FOR A FALL HEIGHT UP TO 2438mm [96"]. 3. DUROLAW IS MAITAIED I THE SAME MAER AS TYPICAL GRASS. 4. IT IS SUGGESTED THAT THE GRASS AD DUROLAW ALOG THE SIDES OF THE SLIDE BE LEFT ALOE TO GROW LOG WITH O MAITEACE 5. GO TO FOR MORE IFORMATIO. 6. SLIDE THE EDGE OF THE DUROLAW MAT mm [6" - 8"] UDEREATH THE SIDES OF THE SLIDE. 7. ROLL THE REST OF THE DUROLAW MAT OUT OF THE WAY OVER THE SIDES OF THE SLIDE. 8. ISTALL LADSCAPE SOIL O THE HILL 600mm [24"] FROM THE EDGES OF THE SLIDE & COMPACT. ESURE THE TOP OF THE SOIL IS 50mm [2"] BELOW FIISHED GRADE. 9. ISTALL A 600mm [24"] WIDE STRIP OF SOD O THE LADSCAPE SOIL 10. ROLL DUROLAW MATS BACK OVER THE SOD AD LET THE EXCESS MAT ROLL DOW THE EDGE OF THE LADSCAPE SOIL mm [4' "] 991 [3'-3"] 25 [1"] MULCH AD GARDE SOIL FOR PLATIG SOD & TOPSOIL ISTALLED UDER DUROLAW 550 [1'-9"] DUROLAW MAT TO BE ROLLED UDER SLIDE & PLATIG BED - SECTIO: SURFACIG ADJACET TO SLIDE - ISTRUMETS FOR YOUR PLAYGROUD 3' EASY ISTALL HILL SLIDE PRODUCT UMBER PAGE 8.5x11 DRAW CHECKED PHOE UMBER: I-PG OF 9.T.S. COPYRIGHT 2016 ATURE'S ISTRUMETS. DO OT SCALE DRAWIGS. OT FOR COMMERCIAL USE OR REPRIT WITHOUT EXPRESSED WRITTE PERMISSIO FROM ATURE'S ISTRUMETS.

7 WIG WALLS: 1. WIG WALLS TO BE ISTALLED WITH PICKETS FACIG THE SLIDE ETRACE SIDE OF THE SLIDE (TOP OF HILL). 2. DEPEDIG O THE SHAPE AD TYPE OF FIISHED SURFACE O THE HILL, A BARRIER MAY BE ISTALLED BETWEE THE WIG WALL POST AD THE COLLAR POST TO RETAI A MIIMAL AMOUT OF MATERIAL FROM SLIDIG ITO THE GARDE BEDS. 3. WIG WALL POSTS WILL BE APPROX. 1829mm [72"] FROM THE COLLAR POSTS. 4. ESURE THAT WHE WIG WALL RAILS ARE POSITIOED I THE OTCHES OF THE COLLAR POSTS THE WIG WALL POSTS REACH THE CETRE OF THE FOOTIG HOLES. 5. DIG HOLES FOR 254mm [10"] Ø SOOTUBES TO AT LEAST 1220mm [48"] BELOW FIISHED GRADE; IE. BELOW THE FROST LIE 6. ISTALL WIG WALL SECTIOS: 6.1. PLACE RAILS ITO OTCHES I COLLAR POSTS ISTALL SCREWS I PRE-DRILLED HOLES I RAILS TO FASTE TO COLLAR POSTS SUSPED WIG WALL POSTS I SOOTUBES LEVEL THE RAILS AD PLUMB THE POST ISTALL COCRETE. WIG WALL RAILS PRE-ASSEMBLED WITH PICKETS 1790mm [5' "] WIG WALL POST PRE-ATTACHED TO RAILS COLLAR POSTS PRE-OTCHED FOR WIG WALL RAILS 10" SOOTUBE FOOTIG ISTALL BELOW FROST LIE - SECTIO: WIG WALLS - ISTRUMETS FOR YOUR PLAYGROUD 3' EASY ISTALL HILL SLIDE PRODUCT UMBER PAGE 8.5x11 DRAW CHECKED PHOE UMBER: I-PG OF 9.T.S. COPYRIGHT 2016 ATURE'S ISTRUMETS. DO OT SCALE DRAWIGS. OT FOR COMMERCIAL USE OR REPRIT WITHOUT EXPRESSED WRITTE PERMISSIO FROM ATURE'S ISTRUMETS.

8 ETRACE PLATFORM: 1. SLIDE ETRACE PLATFORM IS 165mm [6 1 2"] THICK. 2. ISTALL 150mm [6"] MI. DEPTH OF CRUSHED GRAVEL (OR 3 4" CLEAR GRAVEL) COMPACTED TO 98 % S.P.D.D. BELOW THE PLATFORM. 3. POSITIO PLATFORM SO THAT THE LOG SIDE OF THE PLATFORM WITH PRE-DRILLED HOLES IS FLUSH AGAIST THE TOP OF SLIDE AD COLLAR POSTS. 4. ESURE THAT THE PLATFORM IS PERFECTLY LEVEL WITH THE TOP OF SLIDE, LEFT TO RIGHT AD FROT TO BACK. 5. REMOVE TWO DECK BOARDS O THE SIDE OF THE PLATFORM WITH PRE-DRILLED HOLES. 6. ATTACH THE PLATFORM WITH TWO SUPPLIED SDWS STRUCTURAL SCREWS THROUGH PREDRILLED HOLES I THE SIDE OF THE PLATFORM ITO EACH COLLAR POST. 7. RE-FASTE LAST TWO DECK BOARDS ADJACET TO THE SLIDE ETRACE. 8. ISTALL A BEAD OF CLEAR SILICOE BETWEE THE EDGE OF THE SLIDE AD THE DECK BOARD. WIG WALL ETRACE PLATFORM FASTE PLATFORM TO COLLAR POSTS WITH SDWS SCREWS COMPACTED GRAULAR BASE COURSE - SECTIO: ETRACE PLATFORM - ISTRUMETS FOR YOUR PLAYGROUD 3' EASY ISTALL HILL SLIDE PRODUCT UMBER PAGE 8.5x11 DRAW CHECKED PHOE UMBER: I-PG OF 9.T.S. COPYRIGHT 2016 ATURE'S ISTRUMETS. DO OT SCALE DRAWIGS. OT FOR COMMERCIAL USE OR REPRIT WITHOUT EXPRESSED WRITTE PERMISSIO FROM ATURE'S ISTRUMETS.

9 5 SAFETY SURFACIG: mm [12"] OF EGIEERED WOOD FIBRE (E.W.F.) OR APPROVED ALTERATE TO BE ISTALLED AT BASE OF SLIDE WITHI LOG BORDER. 1800mm [72"] 2. ISTALL E.W.F. ACCORDIG TO MAUFACTURER'S RECOMMEDATIOS. 3. E.W.F. MAY REQUIRE A 300mm [12"] PERCOLATIO BED FOR DRAIAGE. LOG BORDER: RS 1. LOG BORDER COMES PRE-MITERED. 2. ALL MITERS ARE LABELED TO MATCH EACH OTHER LS 1800mm [72"] POSITIO LOGS LABELED "LS" & "RS" SO THEY ARE PERPEDICULAR TO THE SLIDE. 4. PLACE LOGS BY MATCHIG UMBERS AD ALIGIG THE MITERED EDGES. 5. LOGS TO BE BURIED AT LEAST 1 3 THEIR HEIGHT. 6. FASTE MITERS TOGETHER WITH SDWS SCREWS I PRE-DRILLED AD COUTERSUK HOLES. 7. JOITS BETWEE LOGS SHALL OT EXCEED 1.5mm [ 1 16"] 8. ESURE THE LOGS MEET THE EDGES OF THE SLIDE AD TOP OF THE LOGS ARE LEVEL WITH THE RAILS OF THE SLIDE PLA: SAFETY SURFACIG - EGIEERED WOOD FIBRE FIISHED GRADE SHALL BE 0-175mm [0" - 7"] BELOW THE SLIDE EXIT. 75mm [3"] IS RECOMMEDED CARVE GRAULAR BASE UDER SLIDE TO TERMIATE THE BASE mm [4" - 6"] BEFORE THE EXIT OF THE SLIDE TO OT ITERFERE WITH THE SAFETY SURFACE GEOTEXTILE FABRIC 3 4" CLEAR STOE DRAIAGE LAYER WRAPPED I GEOTEXITLE - SECTIO: SAFETY SURFACIG - UDISTURBED SOIL ISTRUMETS FOR YOUR PLAYGROUD 3' EASY ISTALL HILL SLIDE PRODUCT UMBER PAGE 8.5x11 DRAW CHECKED PHOE UMBER: I-PG OF 9.T.S. COPYRIGHT 2016 ATURE'S ISTRUMETS. DO OT SCALE DRAWIGS. OT FOR COMMERCIAL USE OR REPRIT WITHOUT EXPRESSED WRITTE PERMISSIO FROM ATURE'S ISTRUMETS.

10 EXAMPLE COTOURS SHOWIG MIIMUM SIZE OF HILL CLEAR ZOE: DO OT PLACE OTHER COMPOETS OR PLATS WITHI THIS ZOE 1800mm [72"] 7682mm [25' "] 1800mm [72"] 1800mm [72"] PROTECTIVE SAFETY ZOE "] ICLUDIG HILL GRADIG 7778mm [25' "] 12660mm [41' mm [35'-1 3 "] ICLUDIG HILL GRADIG 16 ISTRUMETS FOR YOUR PLAYGROUD 3' EASY ISTALL HILL SLIDE - LAYOUT PRODUCT UMBER PAGE 8.5x11 DRAW CHECKED PHOE UMBER: I-PG OF 1.T.S. COPYRIGHT 2016 ATURE'S ISTRUMETS. DO OT SCALE DRAWIGS. OT FOR COMMERCIAL USE OR REPRIT WITHOUT EXPRESSED WRITTE PERMISSIO FROM ATURE'S ISTRUMETS.